We present a theoretical scheme to realize two-dimensional(2D)asymmetric diffraction grating in a five-level inverted Y-type asymmetric double semiconductor quantum wells(SQWs)structure with resonant tunneling.The SQW...We present a theoretical scheme to realize two-dimensional(2D)asymmetric diffraction grating in a five-level inverted Y-type asymmetric double semiconductor quantum wells(SQWs)structure with resonant tunneling.The SQW structure interacts with a weak probe laser field,a spatially independent 2D standing-wave(SW)field,and a Laguerre–Gaussian(LG)vortex field,respectively.The results indicate that the diffraction patterns are highly sensitive to amplitude modulation and phase modulation.Because of the existence of vortex light,it is possible to realize asymmetric high-order diffraction in the SQW structure,and then a 2D asymmetric grating is established.By adjusting the detunings of the probe field,vortex field,and SW field,as well as the interaction length,diffraction intensity,and direction of the 2D asymmetric electromagnetically induced grating(EIG)can be controlled effectively.In addition,the number of orbital angular momenta(OAM)and beam waist parameter can be used to modulate the diffraction intensity and energy transfer of the probe light in different regions.High-order diffraction intensity is enhanced and high-efficiency 2D asymmetric diffraction grating with different diffraction patterns is obtained in the scheme.Such 2D asymmetric diffraction grating may be beneficial to the research of optical communication and innovative semiconductor quantum devices.展开更多
We propose a theoretical scheme to realize a two-dimensional(2D)diffraction grating in a four-level inverted-Y-type atomic system coupled by a standing-wave(SW)field and a Laguerre-Gaussian(LG)vortex field.Owing to as...We propose a theoretical scheme to realize a two-dimensional(2D)diffraction grating in a four-level inverted-Y-type atomic system coupled by a standing-wave(SW)field and a Laguerre-Gaussian(LG)vortex field.Owing to asymmetric spatial modulation of the LG vortex field,the incident probe field can be lopsidedly diffracted into four domains and an asymmetric 2D electromagnetically induced grating is created.By adjusting the detunings of the probe field and the LG vortex field,the intensities of the LG vortex field and the coherent SW field,as well as the interaction length,the diffraction properties and efficiency,can be effectively manipulated.In addition,the effect of the azimuthal parameter on the Fraunhofer diffraction of the probe field is also discussed.This asymmetric 2D diffraction grating scheme may provide a versatile platform for designing quantum devices that require asymmetric light transmission.展开更多
The phase diversity wavefront sensor is one of the tools used to estimate wavefront aberration, and it is often used as a wavefront sensor in adaptive optics systems. However, the performance of the traditional phase ...The phase diversity wavefront sensor is one of the tools used to estimate wavefront aberration, and it is often used as a wavefront sensor in adaptive optics systems. However, the performance of the traditional phase diversity wavefront sensor is limited by the accuracy and dynamic ranges of the intensity distribution at the focus and defocus positions of the CCD camera. In this paper, a modified phase diversity wavefront sensor based on a diffraction grating is proposed to improve the ability to measure the wavefront aberration with larger amplitude and higher spatial frequency. The basic principle and the optics construction of the proposed method are also described in detail. The noise propagation property of the proposed method is also analysed by using the numerical simulation method, and comparison between the diffraction grating phase diversity wavefront sensor and the traditional phase diversity wavefront sensor is also made. The simulation results show that the diffraction grating phase diversity wavefront sensor can obviously improve the ability to measure the wavefront aberration, especially the wavefront aberration with larger amplitude and higher spatial frequency.展开更多
We experimentally detect high-refractive-index media (n > 1.5) using a surface plasmon resonance (SPR) sensor with a diffraction grating. While SPR sensors are generally based on the attenuated total reflection met...We experimentally detect high-refractive-index media (n > 1.5) using a surface plasmon resonance (SPR) sensor with a diffraction grating. While SPR sensors are generally based on the attenuated total reflection method using metal films, here, we focus on a method using a diffraction grating, which can detect relatively higher refractive-index media and is suitable for device miniaturization. In this study, we used the rigorous coupled-wave analysis method to simulate the dependence of the reflectance on an incident angle for media with refractive index values up to 1.700. In the experiment, a medium (n = 1.660 - 1.700) was successfully detected using this grating. Under the conditions of the grating (period: 600 nm, Au thickness: 40 nm) using a red laser (λ: 635 nm), a sharp decline in the reflectance and a rise in the transmittance at certain angles were confirmed, demonstrating the extraordinary transmission enabled by SPR. Because excitation angles changed with changes in the refractive index, we concluded that this method can be applied to sensors that detect high-refractive-index media.展开更多
The optical embedded diffraction gratings with the internal refractive index modification in BK-7 glass plates were demonstrated using low-density plasma formation excited by a high-intensity femtosecond （130 fs） Ti...The optical embedded diffraction gratings with the internal refractive index modification in BK-7 glass plates were demonstrated using low-density plasma formation excited by a high-intensity femtosecond （130 fs） Ti： sapphire laser （λp=790 rim）. The refractive index modifications with diameters ranging from 400 nm to 4 gm were photoinduced after plasma formation occurred upon irradiation with peak intensities of more than 1 ×10^13 W/cm2. The graded refractive index profile was fabricated to be a symmetric around the center of the point at which low-density plasma occurred. The maximum refractive index change （An） was estimated to be 1.5x10 2. Several optical embedded gratings in BK-7 glass plate were demonstrated with refractive index modification induced by the scanning of low-density plasma formation.展开更多
Spectral diagnosis of radiation from laser plasma interaction and monochromation of radiation source are hot and important topics recently. Grating is one of the primary optical elements to do this job. Although easy ...Spectral diagnosis of radiation from laser plasma interaction and monochromation of radiation source are hot and important topics recently. Grating is one of the primary optical elements to do this job. Although easy to fabricate, traditional diffraction grating suffers from multi-order diffraction contamination. On the other hand, sinusoidal amplitude grating has the nonharmonic diffraction property, but it is too difficult to fabricate, especially for x-ray application. A novel nonharmonic diffraction grating named random position rectangle grating（RPRG） is proposed in this paper. Theoretical analysis and experiment results show that the RPRG is both higher order diffraction suppressing and not difficult to fabricate. Additionally, it is highly efficient; its first order absolute theoretical diffraction efficiency reaches 4.1%. Our result shows that RPRG is a novel tool for radiation diagnosis and monochromation.展开更多
It has been more than half a century since the release of the first Shimadzu UV-VIS （UV-visible） spectrophotometer QB-50 in 1952, and during this time more than 160,000 UV-VIS spectrometers have been produced and in...It has been more than half a century since the release of the first Shimadzu UV-VIS （UV-visible） spectrophotometer QB-50 in 1952, and during this time more than 160,000 UV-VIS spectrometers have been produced and installed in a wide variety of different applications. A lot of technical innovations have been implemented to improve the performance and significantly reduce the stray light levels. The latest innovation during development of sophisticated spectrophotometers is based on a new holographic exposure method and optimized etching process which has made it possible to produce both high-efficient and exceptionally low stray light gratings. These LO-RAY-LIGH~ gratings have guaranteed values of stray light at the intermediate position between zero-order and first-order lights. The values are measured by Shimadzu＇s laser stray-light-measuring system. The latest development in the series of UV-VIS spectrophotometers is the UV-2700 which is a true double beam double monochromator system in a compact design for high-precision spectral analysis of a wide range of samples including organic and inorganic compounds, biological samples, optical materials and photovoltaics. The high performance optical system is designed with ＂LO-RAY-LIGH＂ diffraction gratings, featuring highest efficiency and exceptionally low stray light. The spectrophotometer operates in the wavelength range from 185 nm to 900 nm and allows highly sophisticated applications such as direct measurement of high density samples up to 8 absorbance units without dilution.展开更多
The scanning interference field exposure technique is an effective method to fabricate holographic diffraction grating with meter-level size and nano-level precision.The main problems of fabricating large-aperture and...The scanning interference field exposure technique is an effective method to fabricate holographic diffraction grating with meter-level size and nano-level precision.The main problems of fabricating large-aperture and high-precision grating by this technique are the high-precision displacement measurement of the stage,the high-precision control of the interference fringe and the real time compensation of the grating phase error.In this paper,the influence of grating groove error on the wavefront aberration is analyzed.In order to improve the precision of the stage with displacement range more than one meter,an integrated displacement measurement combining grating sensing and laser interferometry is proposed,which suppresses the influence of environment on measurement precision under long displacement range.An interference fringe measurement method is proposed,which combines the diffraction characteristics of the measuring grating with the phase-shifting algorithm.By controlling the direction,period and phase nonlinear errors of the interference fringe,high quality interference fringe can be obtained.Further,a dynamic phase-locking model is established by using heterodyne interferometry to compensate grating phase error caused by stage motion error in real time.A grating with the aperture of 1500mm×420mm is fabricated.The wavefront aberration reaches 0.327λ@632.8 nm and the wavefront gradient reaches 16.444 nm/cm.This research presents a novel technique for the fabrication of meter-level size and nano-level precision holographic grating,which would further promote the development of chirped pulse amplification systems,high-energy laser and ultra-high precision displacement measurement.展开更多
A flat-topped etched diffraction grating (EDG) demultiplexer with a low polarization-dependent loss (PDL) is designed. A design and simulation method based on the method of moment (MoM) is proposed. A 65-channcl EDG d...A flat-topped etched diffraction grating (EDG) demultiplexer with a low polarization-dependent loss (PDL) is designed. A design and simulation method based on the method of moment (MoM) is proposed. A 65-channcl EDG demultiplexer with channel spacing of 100 GHz is considered as a design example. A tapered multi-mode interferometer (MMI) is used to flatten the passband of the EDG demultiplexer. The numerical results show that the exit width of the tapered waveguide impacts the loss of the TE case more than that of the TM case. Based on this fact, the exit width of the taper is optimized to obtain the lowest PDL. The tapering angle is also optimized where the minimal ripple is obtained. The designed EDG demultiplexer has an excellent flat-topped spectral response and a very low PDL.展开更多
The integral equation method for the simulation of the diffraction by optical gratings is an efficient numerical tool if profile gratings determined by simple crosssection curves are considered.This method in its rece...The integral equation method for the simulation of the diffraction by optical gratings is an efficient numerical tool if profile gratings determined by simple crosssection curves are considered.This method in its recent version is capable to tackle profile curves with corners,gratings with thin coated layers,and diffraction scenarios with unfavorably large ratio period over wavelength.We discuss special implementational issues including the efficient evaluation of the quasi-periodic Green kernels,the quadrature algorithm,and the iterative solution of the arising systems of linear equations.Finally,as an example we present the simulation of echelle gratings which demonstrates the efficency of our approach.展开更多
This paper is concerned with the problem of scattering of time-harmonic electromag- netic waves from penetrable diffraction gratings in the 2D polarization case. We propose a new, weakly singular, integral equation fo...This paper is concerned with the problem of scattering of time-harmonic electromag- netic waves from penetrable diffraction gratings in the 2D polarization case. We propose a new, weakly singular, integral equation formulation for the scattering problem which is proved to be uniquely solvable. A main feature of the new integral equation formula- tion is that it avoids the computation of the normal derivative of double-layer potentials which is difficult and time consuming. A fast numerical algorithm is also developed for the scattering problem, based on the NystrSm method for the new integral equation. Nu- merical examples are also shown to illustrate the applicability of the new integral equation formulation.展开更多
A novel semiconductor laser which can achieve mode-hop-free tuning is proposed. The device consists of an etched diffraction grating （EDG） as a dispersive element to provide the mode selection function and an active...A novel semiconductor laser which can achieve mode-hop-free tuning is proposed. The device consists of an etched diffraction grating （EDG） as a dispersive element to provide the mode selection function and an active waveguide to provide optical gain for the laser. The slab waveguide region of the EDG contains a tuning section covered by an electrode to inject a tuning current, and thus changes the refractive index. Mode-hop-free tuning is achieved by specially designing the shape of the tuning section, so that the tuning rate of the central wavelength reflected by the EDG and the tuning rate of the resonant wavelength of the laser cavity are equal. An optimized tuning section shape is designed to obtain the largest tuning range within a limited current range. Numerical simulation is presented to demonstTate the mode-hop-free tuning operation.展开更多
Chirped-pitch nanoscale circular surface-relief diffraction gratings were photoinscribed on thin films of a Disperse Red 1 functionalized material using a holographic technique. A truncated conical mirror splits and r...Chirped-pitch nanoscale circular surface-relief diffraction gratings were photoinscribed on thin films of a Disperse Red 1 functionalized material using a holographic technique. A truncated conical mirror splits and redirects a converging or diverging laser beam, resulting in an interference pattern of concentric circles with a chirped pitch that can be controlled by varying the wavefront curvature. The resulting circular gratings have a diameter of 12 mm and have the advantage of being produced in a fast, single-step procedure with no requirement for a master grating,photomask, or milling equipment.展开更多
For numerical simulation of one-dimensional diffraction gratings both in TE and TM polarization,an enhanced adaptive finite element method is proposed in this paper.A modified perfectly matched layer(PML)formulation i...For numerical simulation of one-dimensional diffraction gratings both in TE and TM polarization,an enhanced adaptive finite element method is proposed in this paper.A modified perfectly matched layer(PML)formulation is proposed for the truncation of the unbounded domain,which results in a homogeneous Dirichlet boundary condition and the corresponding error estimate is greatly simplified.The a posteriori error estimates for the adaptive finite element method are provided.Moreover,a lower bound is obtained to demonstrate that the error estimates obtained are sharp.展开更多
The gas-sensitive film coated π-phase-shifted long-period fiber grating(LPFG),consisting of two same long-period fiber gratings cascaded by a regular fiber with length of half of the grating period,is proposed for ga...The gas-sensitive film coated π-phase-shifted long-period fiber grating(LPFG),consisting of two same long-period fiber gratings cascaded by a regular fiber with length of half of the grating period,is proposed for gas sensing.The sensitivity of the sensor is defined by the change rate of the transmission at specific wavelength with respect to the film refractive index.The qualitative and numerical analyses show that to get a high sensitivity,the optimal coupling strength of each long-period fiber grating is √2 π/4.With this coupling strength,the longer the grating is,the higher sensitivity the sensor has.By choosing appropriate grating period,a high sensitivity for the film with a certain refractive index and thickness can be attained.展开更多
An optical fiber sensor for strain and temperature measurement based on long period fiber grating(LPFG) cascaded with fiber Bragg grating(FBG) structure has been proposed and realized both theoretically and experiment...An optical fiber sensor for strain and temperature measurement based on long period fiber grating(LPFG) cascaded with fiber Bragg grating(FBG) structure has been proposed and realized both theoretically and experimentally. Theoretical analysis shows that two microstructures with similar sensitivities cannot be used for double parameters measurement. The LPFG is micromachined by the CO_2 laser, and the FBG is micromachined by the excimer laser. For the validation and comparison, two FBGs and one LPFG are cascaded with three transmission valleys, namely FBG1 valley at 1 536.3 nm, LPFG valley at 1 551.2 nm, and FBG2 valley at 1 577.3 nm. The temperature and strain characteristics of the proposed sensor are measured at 45—70 °C and 250—500 με, respectively. The sensitivity matrix is determined by analyzing wavelength shifts and parameter response characterization of three different dips. The proposed optical fiber sensor based on LPFG cascaded with FBG structure can be efficiently used for double parameters measurement with promising application prospect and great research reference value.展开更多
A novel single order diffraction grating in the soft X-ray region, called quasi-random radius pinhole array spectro- scopic photon sieves （QRSPS）, is proposed in this paper. This new grating is composed of pinholes ...A novel single order diffraction grating in the soft X-ray region, called quasi-random radius pinhole array spectro- scopic photon sieves （QRSPS）, is proposed in this paper. This new grating is composed of pinholes on a substrate, whose radii are quasi-random, while their centers are regular. Analysis proves that its transmittance function across the grating bar is similar to that of sinusoidal transmission gratings. Simulation results show that the QRSPS can suppress higher-order diffraction effectively. And the QRSPS would still retain its characteristic of single order diffraction when we take the effect of X-ray penetration into account. These properties indicate that the QRSPS can be used in the soft X-ray spectra measurement.展开更多
We present preparation of asymmetric grating with higher diffraction efficiency in quantum dot molecules by combining the tunneling effect and parity-time antisymmetry.In the presence of tunneling between two quantum ...We present preparation of asymmetric grating with higher diffraction efficiency in quantum dot molecules by combining the tunneling effect and parity-time antisymmetry.In the presence of tunneling between two quantum dots,the system exhibits the striking PT antisymmetry via spatially modulating the driving field and the detuning with respect to the driven transition.For this reason,the asymmetric grating could be achieved.The results show that the diffraction efficiency can be adjustable via changing the driving intensity,detuning,tunneling strength,and interaction length,and then the high-order diffraction can be reached.The scheme provides a feasible way to obtain the direction-controlled diffraction grating,which can be helpful for optical information processing and realization of controllable optical self-image.展开更多
Using Nd:YAG second harmonic pulse (100 ps), the optical storage properties of two novel polyesters, poly [4'-bis (N, N-oxyethylene) imino-4-nitroazobenzene succinyl] and poly [2'-chloro-4'-bis (N, N-oxyet...Using Nd:YAG second harmonic pulse (100 ps), the optical storage properties of two novel polyesters, poly [4'-bis (N, N-oxyethylene) imino-4-nitroazobenzene succinyl] and poly [2'-chloro-4'-bis (N, N-oxyethylene) imino-4-nitroazobenzene succinyl] have been studied by multiwave mixing. The high-order diffractions of the orientation gratings induced by anisotropy via the reorientation of nitroazobenzene groups and optical information storage with long-term stability have been realized by multiwave mixing in their films. Up to 3rd order forward diffraction was detected in two wave mixing, while up to 4th order backward diffraction was observed in degenerated four wave mixing. The recording mechanism was explained by the trans-cis-trans isomerization cycles of azobenzene groups. The isomerization of these azobenzene groups probably undergoes with inversion mechanism under the experimental conditions. The information recorded in these films has been kept for more than 6 months.展开更多
A new scheme for recording a dynamic phase grating with an asymmetric profile in C60-doped homeotropically aligned nematic liquid crystal（NLC） was presented.An oblique incidence beam was used to record the thin asym...A new scheme for recording a dynamic phase grating with an asymmetric profile in C60-doped homeotropically aligned nematic liquid crystal（NLC） was presented.An oblique incidence beam was used to record the thin asymmetric dynamic phase holographic grating.The diffraction efficiency we achieved is more than 40%,exceeding the theoretical limit for symmetric profile gratings.Both facts can be explained by assuming that a grating with an asymmetric saw-tooth profile is formed in the NLC.Finally,physical mechanism and mathematical model for characterizing the asymmetric phase holographic grating were presented,based on the photo-refractive-like（PR-like） effect.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.12105210)the Knowledge Innovation Program of Wuhan-Basi Research(Grant No.2023010201010149)。
文摘We present a theoretical scheme to realize two-dimensional(2D)asymmetric diffraction grating in a five-level inverted Y-type asymmetric double semiconductor quantum wells(SQWs)structure with resonant tunneling.The SQW structure interacts with a weak probe laser field,a spatially independent 2D standing-wave(SW)field,and a Laguerre–Gaussian(LG)vortex field,respectively.The results indicate that the diffraction patterns are highly sensitive to amplitude modulation and phase modulation.Because of the existence of vortex light,it is possible to realize asymmetric high-order diffraction in the SQW structure,and then a 2D asymmetric grating is established.By adjusting the detunings of the probe field,vortex field,and SW field,as well as the interaction length,diffraction intensity,and direction of the 2D asymmetric electromagnetically induced grating(EIG)can be controlled effectively.In addition,the number of orbital angular momenta(OAM)and beam waist parameter can be used to modulate the diffraction intensity and energy transfer of the probe light in different regions.High-order diffraction intensity is enhanced and high-efficiency 2D asymmetric diffraction grating with different diffraction patterns is obtained in the scheme.Such 2D asymmetric diffraction grating may be beneficial to the research of optical communication and innovative semiconductor quantum devices.
基金supported by the National Natural Science Foundation of China (grant no. 12105210)the Knowledge Innovation Program of Wuhan-Basic Research (grant no. 2023010201010149)
文摘We propose a theoretical scheme to realize a two-dimensional(2D)diffraction grating in a four-level inverted-Y-type atomic system coupled by a standing-wave(SW)field and a Laguerre-Gaussian(LG)vortex field.Owing to asymmetric spatial modulation of the LG vortex field,the incident probe field can be lopsidedly diffracted into four domains and an asymmetric 2D electromagnetically induced grating is created.By adjusting the detunings of the probe field and the LG vortex field,the intensities of the LG vortex field and the coherent SW field,as well as the interaction length,the diffraction properties and efficiency,can be effectively manipulated.In addition,the effect of the azimuthal parameter on the Fraunhofer diffraction of the probe field is also discussed.This asymmetric 2D diffraction grating scheme may provide a versatile platform for designing quantum devices that require asymmetric light transmission.
文摘The phase diversity wavefront sensor is one of the tools used to estimate wavefront aberration, and it is often used as a wavefront sensor in adaptive optics systems. However, the performance of the traditional phase diversity wavefront sensor is limited by the accuracy and dynamic ranges of the intensity distribution at the focus and defocus positions of the CCD camera. In this paper, a modified phase diversity wavefront sensor based on a diffraction grating is proposed to improve the ability to measure the wavefront aberration with larger amplitude and higher spatial frequency. The basic principle and the optics construction of the proposed method are also described in detail. The noise propagation property of the proposed method is also analysed by using the numerical simulation method, and comparison between the diffraction grating phase diversity wavefront sensor and the traditional phase diversity wavefront sensor is also made. The simulation results show that the diffraction grating phase diversity wavefront sensor can obviously improve the ability to measure the wavefront aberration, especially the wavefront aberration with larger amplitude and higher spatial frequency.
文摘We experimentally detect high-refractive-index media (n > 1.5) using a surface plasmon resonance (SPR) sensor with a diffraction grating. While SPR sensors are generally based on the attenuated total reflection method using metal films, here, we focus on a method using a diffraction grating, which can detect relatively higher refractive-index media and is suitable for device miniaturization. In this study, we used the rigorous coupled-wave analysis method to simulate the dependence of the reflectance on an incident angle for media with refractive index values up to 1.700. In the experiment, a medium (n = 1.660 - 1.700) was successfully detected using this grating. Under the conditions of the grating (period: 600 nm, Au thickness: 40 nm) using a red laser (λ: 635 nm), a sharp decline in the reflectance and a rise in the transmittance at certain angles were confirmed, demonstrating the extraordinary transmission enabled by SPR. Because excitation angles changed with changes in the refractive index, we concluded that this method can be applied to sensors that detect high-refractive-index media.
基金Projects(2010-0001-226, 2010-0008-277) supported by NCRC(National Core Research Center) Program through the National Research Foundation of Korea funded by the Ministry of Education, Science and Technology
文摘The optical embedded diffraction gratings with the internal refractive index modification in BK-7 glass plates were demonstrated using low-density plasma formation excited by a high-intensity femtosecond （130 fs） Ti： sapphire laser （λp=790 rim）. The refractive index modifications with diameters ranging from 400 nm to 4 gm were photoinduced after plasma formation occurred upon irradiation with peak intensities of more than 1 ×10^13 W/cm2. The graded refractive index profile was fabricated to be a symmetric around the center of the point at which low-density plasma occurred. The maximum refractive index change （An） was estimated to be 1.5x10 2. Several optical embedded gratings in BK-7 glass plate were demonstrated with refractive index modification induced by the scanning of low-density plasma formation.
基金Project supported by the National Natural Science Foundation of China(Grant No.11375160)the National Science Instruments Major Project of China(Grant No.2012YQ130125)
文摘Spectral diagnosis of radiation from laser plasma interaction and monochromation of radiation source are hot and important topics recently. Grating is one of the primary optical elements to do this job. Although easy to fabricate, traditional diffraction grating suffers from multi-order diffraction contamination. On the other hand, sinusoidal amplitude grating has the nonharmonic diffraction property, but it is too difficult to fabricate, especially for x-ray application. A novel nonharmonic diffraction grating named random position rectangle grating（RPRG） is proposed in this paper. Theoretical analysis and experiment results show that the RPRG is both higher order diffraction suppressing and not difficult to fabricate. Additionally, it is highly efficient; its first order absolute theoretical diffraction efficiency reaches 4.1%. Our result shows that RPRG is a novel tool for radiation diagnosis and monochromation.
文摘It has been more than half a century since the release of the first Shimadzu UV-VIS （UV-visible） spectrophotometer QB-50 in 1952, and during this time more than 160,000 UV-VIS spectrometers have been produced and installed in a wide variety of different applications. A lot of technical innovations have been implemented to improve the performance and significantly reduce the stray light levels. The latest innovation during development of sophisticated spectrophotometers is based on a new holographic exposure method and optimized etching process which has made it possible to produce both high-efficient and exceptionally low stray light gratings. These LO-RAY-LIGH~ gratings have guaranteed values of stray light at the intermediate position between zero-order and first-order lights. The values are measured by Shimadzu＇s laser stray-light-measuring system. The latest development in the series of UV-VIS spectrophotometers is the UV-2700 which is a true double beam double monochromator system in a compact design for high-precision spectral analysis of a wide range of samples including organic and inorganic compounds, biological samples, optical materials and photovoltaics. The high performance optical system is designed with ＂LO-RAY-LIGH＂ diffraction gratings, featuring highest efficiency and exceptionally low stray light. The spectrophotometer operates in the wavelength range from 185 nm to 900 nm and allows highly sophisticated applications such as direct measurement of high density samples up to 8 absorbance units without dilution.
基金supported by National Key R&D Program of China(2022YFB3606100)the National Natural Science Foundation of(62435019,52275554,U21A20509,61227901)+1 种基金CAS Project for Young Scientists in Basic Research(YSBR-103)Chinese Academy of Sciences Youth Innovation Promotion Association grant(2021220).
文摘The scanning interference field exposure technique is an effective method to fabricate holographic diffraction grating with meter-level size and nano-level precision.The main problems of fabricating large-aperture and high-precision grating by this technique are the high-precision displacement measurement of the stage,the high-precision control of the interference fringe and the real time compensation of the grating phase error.In this paper,the influence of grating groove error on the wavefront aberration is analyzed.In order to improve the precision of the stage with displacement range more than one meter,an integrated displacement measurement combining grating sensing and laser interferometry is proposed,which suppresses the influence of environment on measurement precision under long displacement range.An interference fringe measurement method is proposed,which combines the diffraction characteristics of the measuring grating with the phase-shifting algorithm.By controlling the direction,period and phase nonlinear errors of the interference fringe,high quality interference fringe can be obtained.Further,a dynamic phase-locking model is established by using heterodyne interferometry to compensate grating phase error caused by stage motion error in real time.A grating with the aperture of 1500mm×420mm is fabricated.The wavefront aberration reaches 0.327λ@632.8 nm and the wavefront gradient reaches 16.444 nm/cm.This research presents a novel technique for the fabrication of meter-level size and nano-level precision holographic grating,which would further promote the development of chirped pulse amplification systems,high-energy laser and ultra-high precision displacement measurement.
基金This work was supported by the National Nat- ural Science Foundation of China under Grant No. 90101024 and 60377022.
文摘A flat-topped etched diffraction grating (EDG) demultiplexer with a low polarization-dependent loss (PDL) is designed. A design and simulation method based on the method of moment (MoM) is proposed. A 65-channcl EDG demultiplexer with channel spacing of 100 GHz is considered as a design example. A tapered multi-mode interferometer (MMI) is used to flatten the passband of the EDG demultiplexer. The numerical results show that the exit width of the tapered waveguide impacts the loss of the TE case more than that of the TM case. Based on this fact, the exit width of the taper is optimized to obtain the lowest PDL. The tapering angle is also optimized where the minimal ripple is obtained. The designed EDG demultiplexer has an excellent flat-topped spectral response and a very low PDL.
基金the German Federal Ministry of Education and Research under Grant number 13N8478.
文摘The integral equation method for the simulation of the diffraction by optical gratings is an efficient numerical tool if profile gratings determined by simple crosssection curves are considered.This method in its recent version is capable to tackle profile curves with corners,gratings with thin coated layers,and diffraction scenarios with unfavorably large ratio period over wavelength.We discuss special implementational issues including the efficient evaluation of the quasi-periodic Green kernels,the quadrature algorithm,and the iterative solution of the arising systems of linear equations.Finally,as an example we present the simulation of echelle gratings which demonstrates the efficency of our approach.
文摘This paper is concerned with the problem of scattering of time-harmonic electromag- netic waves from penetrable diffraction gratings in the 2D polarization case. We propose a new, weakly singular, integral equation formulation for the scattering problem which is proved to be uniquely solvable. A main feature of the new integral equation formula- tion is that it avoids the computation of the normal derivative of double-layer potentials which is difficult and time consuming. A fast numerical algorithm is also developed for the scattering problem, based on the NystrSm method for the new integral equation. Nu- merical examples are also shown to illustrate the applicability of the new integral equation formulation.
基金supported by the National Natural Science Foundation of China (No 60788403)the Fundamental Research Funds for the Central Universities of China
文摘A novel semiconductor laser which can achieve mode-hop-free tuning is proposed. The device consists of an etched diffraction grating （EDG） as a dispersive element to provide the mode selection function and an active waveguide to provide optical gain for the laser. The slab waveguide region of the EDG contains a tuning section covered by an electrode to inject a tuning current, and thus changes the refractive index. Mode-hop-free tuning is achieved by specially designing the shape of the tuning section, so that the tuning rate of the central wavelength reflected by the EDG and the tuning rate of the resonant wavelength of the laser cavity are equal. An optimized tuning section shape is designed to obtain the largest tuning range within a limited current range. Numerical simulation is presented to demonstTate the mode-hop-free tuning operation.
文摘Chirped-pitch nanoscale circular surface-relief diffraction gratings were photoinscribed on thin films of a Disperse Red 1 functionalized material using a holographic technique. A truncated conical mirror splits and redirects a converging or diverging laser beam, resulting in an interference pattern of concentric circles with a chirped pitch that can be controlled by varying the wavefront curvature. The resulting circular gratings have a diameter of 12 mm and have the advantage of being produced in a fast, single-step procedure with no requirement for a master grating,photomask, or milling equipment.
基金The work is partially supported by the NTU start-up grant M58110011.
文摘For numerical simulation of one-dimensional diffraction gratings both in TE and TM polarization,an enhanced adaptive finite element method is proposed in this paper.A modified perfectly matched layer(PML)formulation is proposed for the truncation of the unbounded domain,which results in a homogeneous Dirichlet boundary condition and the corresponding error estimate is greatly simplified.The a posteriori error estimates for the adaptive finite element method are provided.Moreover,a lower bound is obtained to demonstrate that the error estimates obtained are sharp.
基金supported by the National Natural Science Foundation of China (No.60777035)the Scientific Research Key Project Fund of the Ministry of Education (No.208040)the Shanghai Leading Academic Discipline Project (No.T0501)
文摘The gas-sensitive film coated π-phase-shifted long-period fiber grating(LPFG),consisting of two same long-period fiber gratings cascaded by a regular fiber with length of half of the grating period,is proposed for gas sensing.The sensitivity of the sensor is defined by the change rate of the transmission at specific wavelength with respect to the film refractive index.The qualitative and numerical analyses show that to get a high sensitivity,the optimal coupling strength of each long-period fiber grating is √2 π/4.With this coupling strength,the longer the grating is,the higher sensitivity the sensor has.By choosing appropriate grating period,a high sensitivity for the film with a certain refractive index and thickness can be attained.
基金supported by the Program for Changjiang Scholars and Innovative Research Team in University(No.IRT_16R07)the Project Plan of Beijing Municipal Education Commission for Enhancing the Innovation Capability in 2015(No.TJSHG201510772016)the Open Project of Beijing Engineering Research Center of Optoelectronic Information and Instruments(No.GD2016008)
文摘An optical fiber sensor for strain and temperature measurement based on long period fiber grating(LPFG) cascaded with fiber Bragg grating(FBG) structure has been proposed and realized both theoretically and experimentally. Theoretical analysis shows that two microstructures with similar sensitivities cannot be used for double parameters measurement. The LPFG is micromachined by the CO_2 laser, and the FBG is micromachined by the excimer laser. For the validation and comparison, two FBGs and one LPFG are cascaded with three transmission valleys, namely FBG1 valley at 1 536.3 nm, LPFG valley at 1 551.2 nm, and FBG2 valley at 1 577.3 nm. The temperature and strain characteristics of the proposed sensor are measured at 45—70 °C and 250—500 με, respectively. The sensitivity matrix is determined by analyzing wavelength shifts and parameter response characterization of three different dips. The proposed optical fiber sensor based on LPFG cascaded with FBG structure can be efficiently used for double parameters measurement with promising application prospect and great research reference value.
基金Project supported by the National Key Scientific Instruments and Equipments Development of Special Item,China(Grant No.2012YQ130125)the National Natural Science Foundation of China(Grant No.11375160)
文摘A novel single order diffraction grating in the soft X-ray region, called quasi-random radius pinhole array spectro- scopic photon sieves （QRSPS）, is proposed in this paper. This new grating is composed of pinholes on a substrate, whose radii are quasi-random, while their centers are regular. Analysis proves that its transmittance function across the grating bar is similar to that of sinusoidal transmission gratings. Simulation results show that the QRSPS can suppress higher-order diffraction effectively. And the QRSPS would still retain its characteristic of single order diffraction when we take the effect of X-ray penetration into account. These properties indicate that the QRSPS can be used in the soft X-ray spectra measurement.
基金the National Natural Science Foundation of China(Grant Nos.11905064,11775190 and 11565013)the Scientific Research Foundation of Jiangxi Provincial Education Department,China(Grant No.GJJ200624).
文摘We present preparation of asymmetric grating with higher diffraction efficiency in quantum dot molecules by combining the tunneling effect and parity-time antisymmetry.In the presence of tunneling between two quantum dots,the system exhibits the striking PT antisymmetry via spatially modulating the driving field and the detuning with respect to the driven transition.For this reason,the asymmetric grating could be achieved.The results show that the diffraction efficiency can be adjustable via changing the driving intensity,detuning,tunneling strength,and interaction length,and then the high-order diffraction can be reached.The scheme provides a feasible way to obtain the direction-controlled diffraction grating,which can be helpful for optical information processing and realization of controllable optical self-image.
文摘Using Nd:YAG second harmonic pulse (100 ps), the optical storage properties of two novel polyesters, poly [4'-bis (N, N-oxyethylene) imino-4-nitroazobenzene succinyl] and poly [2'-chloro-4'-bis (N, N-oxyethylene) imino-4-nitroazobenzene succinyl] have been studied by multiwave mixing. The high-order diffractions of the orientation gratings induced by anisotropy via the reorientation of nitroazobenzene groups and optical information storage with long-term stability have been realized by multiwave mixing in their films. Up to 3rd order forward diffraction was detected in two wave mixing, while up to 4th order backward diffraction was observed in degenerated four wave mixing. The recording mechanism was explained by the trans-cis-trans isomerization cycles of azobenzene groups. The isomerization of these azobenzene groups probably undergoes with inversion mechanism under the experimental conditions. The information recorded in these films has been kept for more than 6 months.
基金Project supported by the Science and Technology Programs of the Educational Committee of Heilongjiang Province,China(Grant No.12541730)the National Natural Science Foundation of China(Grant No.61405057)
文摘A new scheme for recording a dynamic phase grating with an asymmetric profile in C60-doped homeotropically aligned nematic liquid crystal（NLC） was presented.An oblique incidence beam was used to record the thin asymmetric dynamic phase holographic grating.The diffraction efficiency we achieved is more than 40%,exceeding the theoretical limit for symmetric profile gratings.Both facts can be explained by assuming that a grating with an asymmetric saw-tooth profile is formed in the NLC.Finally,physical mechanism and mathematical model for characterizing the asymmetric phase holographic grating were presented,based on the photo-refractive-like（PR-like） effect.
