In response to the shortcomings of the common encoders in the industry,of which the photoelectric encoders have a poor anti-interference ability in harsh industrial environments with water,oil,dust,or strong vibration...In response to the shortcomings of the common encoders in the industry,of which the photoelectric encoders have a poor anti-interference ability in harsh industrial environments with water,oil,dust,or strong vibrations and the magnetic encoders are too sensitive to magnetic field density,this paper designs a new differential encoder based on the grating eddy-current measurement principle,abbreviated as differential grating eddy-current encoder(DGECE).The grating eddy-current of DGECE consists of a circular array of trapezoidal reflection conductors and 16 trapezoidal coils with a special structure to form a differential relationship,which are respectively located on the code plate and the readout plate designed by a printed circuit board.The differential structure of DGECE corrects the common mode interference and the amplitude distortion due to the assembly to some extent,possesses a certain anti-interference capability,and greatly simplifies the regularization algorithm of the original data.By means of the corresponding readout circuit and demodulation algorithm,the DGECE can convert the periodic impedance variation of 16 coils into an angular output within the 360°cycle.Due to its simple manufacturing process and certain interference immunity,DGECE is easy to be integrated and mass-produced as well as applicable in the industrial spindles,especially in robot joints.This paper presents the measurement principle,implementation methods,and results of the experiment of the DGECE.The experimental results show that the accuracy of the DGECE can reach 0.237%and the measurement standard deviation can reach±0.14°within360°cycle.展开更多
A flexible or planar eddy current probe with a differential structure can suppress the lift-off noise during the inspection of defects.However,the extent of the lift-off effect on differential probes,including differe...A flexible or planar eddy current probe with a differential structure can suppress the lift-off noise during the inspection of defects.However,the extent of the lift-off effect on differential probes,including different coil structures,varies.In this study,two planar eddy current probes with differential pickup structures and the same size,Koch and circular probes,were used to compare lift-off effects.The eddy current distributions of the probes perturbed by 0°and 90°cracks were obtained by finite element analysis.The analysis results show that the 90°crack can impede the eddy current induced by the Koch probe even further at relatively low lift-off distance.The peak-to-peak values of the signal output from the two probes were compared at different lift-off distances using finite element analysis and experimental methods.In addition,the effects of different frequencies on the lift-off were studied experimentally.The results show that the signal peak-to-peak value of the Koch probe for the inspection of cracks in 90°orientation is larger than that of the circular probe when the lift-off distance is smaller than 1.2 mm.In addition,the influence of the lift-off distance on the peak-to-peak signal value of the two probes was studied via normalization.This indicates that the influence becomes more evident with an increase in excitation frequency.This research discloses the lift-off effect of differential planar eddy current probes with different coil shapes and proves the detection merit of the Koch probe for 90°cracks at low lift-off distances.展开更多
The high-resolution and nondestructive co-reference measurement of the inner and outer threedimensional(3D)surface profiles of laser fusion targets is difficult to achieve.In this study,we propose a laser differential...The high-resolution and nondestructive co-reference measurement of the inner and outer threedimensional(3D)surface profiles of laser fusion targets is difficult to achieve.In this study,we propose a laser differential confocal(LDC)–atomic force probe(AFP)method to measure the inner and outer 3D surface profiles of laser fusion targets at a high resolution.This method utilizes the LDC method to detect the deflection of the AFP and exploits the high spatial resolution of the AFP to enhance the spatial resolution of the outer profile measurement.Nondestructive and co-reference measurements of the inner profile of a target were achieved using the tomographic characteristics of the LDC method.Furthermore,by combining multiple repositionings of the target using a horizontal slewing shaft,the inner and outer 3D surface profiles of the target were obtained,along with a power spectrum assessment of the entire surface.The experimental results revealed that the respective axial and lateral resolutions of the outer profile measurement were 0.5 and 1.3 nm,while the respective axial and lateral resolutions of the inner profile measurement were 2.0 nm and approximately 400.0 nm.The repeatabilities of the rootmean-square deviation measurements for the outer and inner profiles of the target were 2.6 and 2.4 nm,respectively.We believe our study provides a promising method for the high-resolution and nondestructive co-reference measurement of the inner and outer 3D profiles of laser fusion targets.展开更多
The demand for high strength fiber in rawcotton has increased because of the widespreaduse of high speed spinning technology in theyarn and textile industry.Improvement ofcotton fiber quality through
A differential excitation probe based on eddy current testing technology was designed. Sheet specimens of Q 235 steel with prefabricated micro-cracks of different widths and of aluminum with prefabricated micro-cracks...A differential excitation probe based on eddy current testing technology was designed. Sheet specimens of Q 235 steel with prefabricated micro-cracks of different widths and of aluminum with prefabricated micro-cracks of different depths were detected through the designed detection system. The characteristics of micro-cracks can be clearly showed after signals processing through the short-time Fourier transform（ STFT）. By changing the parameter and its value in detecting process,the factors including the excitation frequency and amplitude,the lift-off effect and the scanning direction were discussed,respectively. The results showed that the differential excitation probe was insensitive to dimension and surface state of the tested specimen,while it had a high degree of recognition for micro-crack detection. Therefore,when the differential excitation detection technology was used for inspecting micro-crack of turbine blade in aero-engine,and smoothed pseudo Wigner-Ville distribution was used for signal processing,micro-cracks of 0. 3 mm depth and 0. 1 mm width could be identified. The experimental results might be useful for further research on engineering test of turbine blades of aero-engine.展开更多
A new probe for atmospheric electric field mill is introduced.It consists of three parts：signal acquisition circuit for atmospheric electric field,preamplifier circuit and phase sensitive detection circuit.The signal...A new probe for atmospheric electric field mill is introduced.It consists of three parts：signal acquisition circuit for atmospheric electric field,preamplifier circuit and phase sensitive detection circuit.The signal acquisition circuit adopts the double-stator structure to form differential input circuit,thus double-precision is obtained.Preamplifier circuit is made of current-to-voltage （I-V） conversion circuit,differential amplifier circtuit and secondary amplifying circuit.The polarity of electric field is obtained via phase sensitive detection circuit.Simulation results are obtained using Multisim,and the feasibility of the designed probe is verified.展开更多
A novel D–π –A structure and near–infrared fluorescent probe(DCITT) with high polarity sensitivity and membrane targeting was reported. The fluorescent spectra of DCITT were polarity dependent and Stokes shift was...A novel D–π –A structure and near–infrared fluorescent probe(DCITT) with high polarity sensitivity and membrane targeting was reported. The fluorescent spectra of DCITT were polarity dependent and Stokes shift was greater than 300 nm. Due to its high fluorescence quantum yield, low cytotoxicity and photostability, DCITT could be used as a labeling probe in multicellular organisms. In particular, DCITT effectively distinguished tumor cells from normal cells because it could specifically light up the cancer cells membrane based on strong red fluorescence for a long time. On this basis, a polar–sensitive cell membrane probe is developed to differentiate tumor cells from normal cells, which provides an idea and method for the early diagnosis of tumor at cellular level.展开更多
In recent years,the number of hand,foot,and mouth disease(HFMD)cases in China has continued to grow,and the disease has become a serious public health issue.Xinjiang Uygur Autonomous Region is located in the arid area...In recent years,the number of hand,foot,and mouth disease(HFMD)cases in China has continued to grow,and the disease has become a serious public health issue.Xinjiang Uygur Autonomous Region is located in the arid areas of Northwest China,where the epidemiological trend of HFMD is gradually increasing and characterized by geographical heterogeneity.In this study,based on the HFMD case data in all counties and cities in Xinjiang,we employed statistical and GIS spatial analyses,and geographic probe models to characterize the spatiotemporal differentiation of HFMD epidemics in Xinjiang during the period of 2009–2018,and quantitatively analyzed the factors influencing the spatial differentiation of HFMD epidemics.The results showed that HFMD incidence rate in Xinjiang had non-stationary temporal characteristics on the interannual and monthly scales,and the monthly variation characteristics of HFMD epidemic were quite different in southern and northern Xinjiang.The spatial distribution characteristics of HFMD epidemics showed a north–south spatial differentiation pattern with the Tianshan Mountains as the boundary;cold spot and hot spot of HFMD epidemics in Xinjiang have shifted from scattered to concentrated,and the spatial differentiation pattern had gradually stabilized.Moreover,the dominant factors influencing the spatial differentiation of HFMD epidemics in Xinjiang were socioeconomic factors,such as per capita GDP and urbanization rate,while the basic factors affecting its spatial differentiation were natural environmental factors.The spatial differentiation and evolution patterns of HFMD epidemics differed between northern and southern Xinjiang.Specifically,the leading role of socioeconomic factors is more obvious in southern Xinjiang than in northern Xinjiang,while natural environmental factors(e.g.,dryness and relative humidity)contribute to the prevalence of HFMD epidemics in northern Xinjiang,and the perturbing effect of these factors was more prominent than other factors.The results of this study can provide a scientific basis for the prevention of HFMD epidemics and early warning of HFMD epidemics in Xinjiang.展开更多
基金the Biomedical Science and Technology Support Special Project of Shanghai Science and Technology Committee(No.20S31908300)。
文摘In response to the shortcomings of the common encoders in the industry,of which the photoelectric encoders have a poor anti-interference ability in harsh industrial environments with water,oil,dust,or strong vibrations and the magnetic encoders are too sensitive to magnetic field density,this paper designs a new differential encoder based on the grating eddy-current measurement principle,abbreviated as differential grating eddy-current encoder(DGECE).The grating eddy-current of DGECE consists of a circular array of trapezoidal reflection conductors and 16 trapezoidal coils with a special structure to form a differential relationship,which are respectively located on the code plate and the readout plate designed by a printed circuit board.The differential structure of DGECE corrects the common mode interference and the amplitude distortion due to the assembly to some extent,possesses a certain anti-interference capability,and greatly simplifies the regularization algorithm of the original data.By means of the corresponding readout circuit and demodulation algorithm,the DGECE can convert the periodic impedance variation of 16 coils into an angular output within the 360°cycle.Due to its simple manufacturing process and certain interference immunity,DGECE is easy to be integrated and mass-produced as well as applicable in the industrial spindles,especially in robot joints.This paper presents the measurement principle,implementation methods,and results of the experiment of the DGECE.The experimental results show that the accuracy of the DGECE can reach 0.237%and the measurement standard deviation can reach±0.14°within360°cycle.
基金Supported by Gansu Provincial Natural Science Foundation of China(Grant No.22JR5RA229)National Natural Science Foundation of China(Grant Nos.51807086,12162021)Hongliu Youth Found of Lanzhou University of Technology and Gansu Provincial Outstanding Graduate Student Innovation Star of China(Grant No.2021CXZX-453).
文摘A flexible or planar eddy current probe with a differential structure can suppress the lift-off noise during the inspection of defects.However,the extent of the lift-off effect on differential probes,including different coil structures,varies.In this study,two planar eddy current probes with differential pickup structures and the same size,Koch and circular probes,were used to compare lift-off effects.The eddy current distributions of the probes perturbed by 0°and 90°cracks were obtained by finite element analysis.The analysis results show that the 90°crack can impede the eddy current induced by the Koch probe even further at relatively low lift-off distance.The peak-to-peak values of the signal output from the two probes were compared at different lift-off distances using finite element analysis and experimental methods.In addition,the effects of different frequencies on the lift-off were studied experimentally.The results show that the signal peak-to-peak value of the Koch probe for the inspection of cracks in 90°orientation is larger than that of the circular probe when the lift-off distance is smaller than 1.2 mm.In addition,the influence of the lift-off distance on the peak-to-peak signal value of the two probes was studied via normalization.This indicates that the influence becomes more evident with an increase in excitation frequency.This research discloses the lift-off effect of differential planar eddy current probes with different coil shapes and proves the detection merit of the Koch probe for 90°cracks at low lift-off distances.
基金supported by the National Natural Science Foundation of China(52327806 and U22A6006).
文摘The high-resolution and nondestructive co-reference measurement of the inner and outer threedimensional(3D)surface profiles of laser fusion targets is difficult to achieve.In this study,we propose a laser differential confocal(LDC)–atomic force probe(AFP)method to measure the inner and outer 3D surface profiles of laser fusion targets at a high resolution.This method utilizes the LDC method to detect the deflection of the AFP and exploits the high spatial resolution of the AFP to enhance the spatial resolution of the outer profile measurement.Nondestructive and co-reference measurements of the inner profile of a target were achieved using the tomographic characteristics of the LDC method.Furthermore,by combining multiple repositionings of the target using a horizontal slewing shaft,the inner and outer 3D surface profiles of the target were obtained,along with a power spectrum assessment of the entire surface.The experimental results revealed that the respective axial and lateral resolutions of the outer profile measurement were 0.5 and 1.3 nm,while the respective axial and lateral resolutions of the inner profile measurement were 2.0 nm and approximately 400.0 nm.The repeatabilities of the rootmean-square deviation measurements for the outer and inner profiles of the target were 2.6 and 2.4 nm,respectively.We believe our study provides a promising method for the high-resolution and nondestructive co-reference measurement of the inner and outer 3D profiles of laser fusion targets.
文摘The demand for high strength fiber in rawcotton has increased because of the widespreaduse of high speed spinning technology in theyarn and textile industry.Improvement ofcotton fiber quality through
基金Supported by the Ministerial Level Advanced Research Foundation(051317030586)Ph.D.Programs Foundation of the Ministry of Education of China(20121101110018)
文摘A differential excitation probe based on eddy current testing technology was designed. Sheet specimens of Q 235 steel with prefabricated micro-cracks of different widths and of aluminum with prefabricated micro-cracks of different depths were detected through the designed detection system. The characteristics of micro-cracks can be clearly showed after signals processing through the short-time Fourier transform（ STFT）. By changing the parameter and its value in detecting process,the factors including the excitation frequency and amplitude,the lift-off effect and the scanning direction were discussed,respectively. The results showed that the differential excitation probe was insensitive to dimension and surface state of the tested specimen,while it had a high degree of recognition for micro-crack detection. Therefore,when the differential excitation detection technology was used for inspecting micro-crack of turbine blade in aero-engine,and smoothed pseudo Wigner-Ville distribution was used for signal processing,micro-cracks of 0. 3 mm depth and 0. 1 mm width could be identified. The experimental results might be useful for further research on engineering test of turbine blades of aero-engine.
文摘A new probe for atmospheric electric field mill is introduced.It consists of three parts：signal acquisition circuit for atmospheric electric field,preamplifier circuit and phase sensitive detection circuit.The signal acquisition circuit adopts the double-stator structure to form differential input circuit,thus double-precision is obtained.Preamplifier circuit is made of current-to-voltage （I-V） conversion circuit,differential amplifier circtuit and secondary amplifying circuit.The polarity of electric field is obtained via phase sensitive detection circuit.Simulation results are obtained using Multisim,and the feasibility of the designed probe is verified.
基金Henan Provincial Science and Technology Research Project (No.232102310369) for financial support。
文摘A novel D–π –A structure and near–infrared fluorescent probe(DCITT) with high polarity sensitivity and membrane targeting was reported. The fluorescent spectra of DCITT were polarity dependent and Stokes shift was greater than 300 nm. Due to its high fluorescence quantum yield, low cytotoxicity and photostability, DCITT could be used as a labeling probe in multicellular organisms. In particular, DCITT effectively distinguished tumor cells from normal cells because it could specifically light up the cancer cells membrane based on strong red fluorescence for a long time. On this basis, a polar–sensitive cell membrane probe is developed to differentiate tumor cells from normal cells, which provides an idea and method for the early diagnosis of tumor at cellular level.
基金supported by the National Natural Science Foundation of China(41861037)the Third Xinjiang Scientific Expedition Program(2021xjkk0902).
文摘In recent years,the number of hand,foot,and mouth disease(HFMD)cases in China has continued to grow,and the disease has become a serious public health issue.Xinjiang Uygur Autonomous Region is located in the arid areas of Northwest China,where the epidemiological trend of HFMD is gradually increasing and characterized by geographical heterogeneity.In this study,based on the HFMD case data in all counties and cities in Xinjiang,we employed statistical and GIS spatial analyses,and geographic probe models to characterize the spatiotemporal differentiation of HFMD epidemics in Xinjiang during the period of 2009–2018,and quantitatively analyzed the factors influencing the spatial differentiation of HFMD epidemics.The results showed that HFMD incidence rate in Xinjiang had non-stationary temporal characteristics on the interannual and monthly scales,and the monthly variation characteristics of HFMD epidemic were quite different in southern and northern Xinjiang.The spatial distribution characteristics of HFMD epidemics showed a north–south spatial differentiation pattern with the Tianshan Mountains as the boundary;cold spot and hot spot of HFMD epidemics in Xinjiang have shifted from scattered to concentrated,and the spatial differentiation pattern had gradually stabilized.Moreover,the dominant factors influencing the spatial differentiation of HFMD epidemics in Xinjiang were socioeconomic factors,such as per capita GDP and urbanization rate,while the basic factors affecting its spatial differentiation were natural environmental factors.The spatial differentiation and evolution patterns of HFMD epidemics differed between northern and southern Xinjiang.Specifically,the leading role of socioeconomic factors is more obvious in southern Xinjiang than in northern Xinjiang,while natural environmental factors(e.g.,dryness and relative humidity)contribute to the prevalence of HFMD epidemics in northern Xinjiang,and the perturbing effect of these factors was more prominent than other factors.The results of this study can provide a scientific basis for the prevention of HFMD epidemics and early warning of HFMD epidemics in Xinjiang.
