The densification and the fractal dimensions of carbon-nickel films annealed at different temperatures 300, 500, 800, and 1000℃ with emphasis on porosity evaluation are investigated. For this purpose, the refractive...The densification and the fractal dimensions of carbon-nickel films annealed at different temperatures 300, 500, 800, and 1000℃ with emphasis on porosity evaluation are investigated. For this purpose, the refractive index of films is determined from transmittance spectra. Three different regimes are identified, T 〈 500℃, 500℃ 〈 T 〈 800℃ and T 〉 800℃. The Rutherford baekscattering spectra show that with increasing the annealing temperature, the concentration of nickel atoms into films decreases. It is shown that the effect of annealing temperatures for increasing films densification at T 〈 500℃ and T 〉 800℃ is greater than the effect of nickel concentrations. It is observed that the effect of decreasing nickel atoms into films at 500℃ 〈 T 〈 800℃ strongly causes improving porosity and decreasing densification. The fractal dimensions of carbon-nickel films annealed from 300 to 500℃ are increased, while from 500 to 1000℃ these characteristics are decreased. It can be seen that at 800℃, films have maximum values of porosity and roughness.展开更多
Modified novel high silicon steel （MNHS, a newly developed reduced-activation martensitic alloy） and commercial alloy Tgl are implanted with 200 keV He2＋ ions to a dose of 5 × 1020 ions/m2 at 300, 450 and 560~...Modified novel high silicon steel （MNHS, a newly developed reduced-activation martensitic alloy） and commercial alloy Tgl are implanted with 200 keV He2＋ ions to a dose of 5 × 1020 ions/m2 at 300, 450 and 560~C. Transmission electron microscopy （TEM） is used to characterize the size and morphology of He bubbles. With the increase of the implantation temperature, TEM observations indicate that bubbles increase in size and the proportion of ＇brick shaped＇ cuboid bubbles increases while the proportion of polyhedral bubbles decreases in both the steel samples. For the samples implanted at the same temperature, the average size of He bubbles in MNHS is smaller than that in T91. This might be due to the abundance of boundaries and precipitates in MNHS, which provide additional sites for the trapping of He atoms, thus reduce the susceptibility of MNHS to He embrittlement.展开更多
The viscosities, η, and ultrasonic speeds, u, of pure benzene, triethylamine, （TEA） tributylamine, （TBA）, and those of their binary mixtures, with benzene as common component, covering the whole composition range...The viscosities, η, and ultrasonic speeds, u, of pure benzene, triethylamine, （TEA） tributylamine, （TBA）, and those of their binary mixtures, with benzene as common component, covering the whole composition range have been measured at 278.15 K, 283.15 K, 288.15 K, 293.15 K, 298.15 K, 303.15 K, 308.15 K, 313.15 K, and 318.15 K. From the experimental data the deviations in viscosity, △η, deviations in Gibbs free energy, AG, deviations in ultrasonic speed, △u, deviations in entropies, △S^＊, and deviations in enthalpies, △H^＊, of activation of viscous flow have been determined. The sign and magnitude of these parameters were found to be sensitive towards interactions prevailing in the studied systems. Further, the excess molar volumes, VE, were calculated using data for the binary mixtures. Moreover, theoretical values of viscosities and ultrasonic speeds of the binary mixtures were calculated using different empirical relations and theories. The results were in experimental and theoretical values. discussed in terms of average deviations （AD）展开更多
LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)cathode material is prepared by sol-gel method and the effects of Nb^(5+)doping and different calcination temperatures on cathode materials were deeply investigated.Structural and morpho...LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)cathode material is prepared by sol-gel method and the effects of Nb^(5+)doping and different calcination temperatures on cathode materials were deeply investigated.Structural and morphological characterizations revealed that the optimal content of 1 mol%Nb^(5+)can stabilize layered structures,mitigate Ni^(2+)migration to Li layers,improve lithium diffusion capacity,and reduce lattice expansion/shrinkage while cycling.And calcination temperature at 800℃can not only ensure good morphology,but also suppress the mixed discharge of lithium and nickel in the internal structure.Electrochemical performance evaluation revealed that Nb^(5+)doping improves the discharge-specific capacity of the material,which is conducive to ameliorating its rate capability and cycle performance.And the material at 800℃exhibits the highest discharge specific capacity,the best magnification performance,low polarizability,and the best cycle reversibility.展开更多
InGaN-based green light-emitting diodes （LEDs） with different growth temperatures of superlattice grown on Si （111） substrates are investigated by temperature-dependent electroluminescence between 100 K and 350K. ...InGaN-based green light-emitting diodes （LEDs） with different growth temperatures of superlattice grown on Si （111） substrates are investigated by temperature-dependent electroluminescence between 100 K and 350K. It is observed that with the decrease of the growth temperature of the superlattice from 895℃ to 855℃, the forward voltage decreases, especially at low temperature. We presume that this is due to the existence of the larger average size of V-shaped pits, which is determined by secondary ion mass spectrometer measurements. Meanwhile, the sample with higher growth temperature of superlattice shows a severer efficiency droop at cryogenic temperatures （about 100 K-150 K）. Electron overflow into p-GaN is considered to be the cause of such phenomena, which is relevant to the poorer hole injection into multiple quantum wells and the more reduced effective active volume in the active region.展开更多
Heat stress seriously affects wheat production in many regions of the world. At present, heat tolerance research remains one of the least understood fields in wheat genetics and breeding and there is a lack of effecti...Heat stress seriously affects wheat production in many regions of the world. At present, heat tolerance research remains one of the least understood fields in wheat genetics and breeding and there is a lack of effective methods to quantify heat stress and heat tolerance in different wheat cultivars. The objective of this study was to use various wheat cultivars to evaluate stress intensity(δ) and a new method for quantification of heat tolerance and compare this technique with three other currently utilized methods. This new parameter for heat tolerance quantification is referred to as the heat tolerance index(HTI) and is an indicator of both yield potential and yield stability. Heat treatments were applied in a controlled setting when anthesis had been reached for 80% of the wheat. The stress intensity evaluation indicated heat shock was the main factor associated with kernel weight reduction while grain yield reduction was mainly associated with chronic high temperature. The methods evaluation showed that a temperature difference of 5°C from natural temperatures was a suitable heat treatment to compare to the untreated controls. HTI was positively correlated with yield under heat stress(r=0.8657, δ=0.15, in 2009–2010; r=0.8418, δ=0.20, in 2010–2011; P<0.01), and negatively correlated with yield reduction rate(r=–0.8344, in 2009–2010; r=–0.7158, in 2010–2011; P<0.01). The results of this study validated the use of HTI and temperature difference control for quantifying wheat heat tolerance that included the yield potential and the stability of different wheat cultivars under heat stress. Additionally, 10 wheat cultivars showed high HTI and should be further tested for their heat confirming characteristics for use in wheat heat tolerance breeding.展开更多
We have studied numerically a simple crack growth model in a two-dimensional triangular lattice of bonds and nodes which incorporates the surface of a growing crack bond-breaking probability P-i similar to exp{(-V-i+E...We have studied numerically a simple crack growth model in a two-dimensional triangular lattice of bonds and nodes which incorporates the surface of a growing crack bond-breaking probability P-i similar to exp{(-V-i+E(i))phi(T)}, where E(i) is elastic energy stored in the i-th bond. Different energy temperature factors phi(T) are employed during crack formation and propagation process with a uniform dilation strain case and a shear case and with periodic boundary condition in the horizontal direction. Our results show that the patterns of the cracks generated are fractal structure and the effective fractal dimensionalities decrease with the increase of the temperature factor phi(T)(the absolute temperature T decreasing). In the paper we also discuss the relation between the effective fractal dimension D-eff (the radius R(g) of gyration) and the fractal dimensions D (the radius R of circular), and also give their modification values Omega about two kinds of methods in the lattice model.展开更多
Radiator cooling configurations need to account for both efficient heat dissipation and energy conservation requirements.Rapid and rational determination of cooling system configurations constitutes a critical aspect ...Radiator cooling configurations need to account for both efficient heat dissipation and energy conservation requirements.Rapid and rational determination of cooling system configurations constitutes a critical aspect of transformer design,enhancing electrical power energy utilization efficiency.Computational fluid dynamics(CFD)is widely recognized as a well-established technique for simulating and optimizing heat dissipation systems.However,this approach is time-consuming because of pre-processing procedures,such as meshing.This paper proposes a fast iterative optimization model for calculating the outlet oil temperature and airflow distribution.Based on the analytical model results,this paper identifies the optimal energy-saving range for radiator cooling configurations,incorporating the cooperative effects of cooling efficiency,air pressure drop during heat transfer,and inlet–outlet temperature difference.The analytical model demonstrated errors in energy dissipation and temperature difference calculations within an acceptable range.The calculation time was reduced by more than 99%.Radiator configurations within the optimal range effectively minimize energy waste while meeting the target temperature difference and enhancing cooling efficiency.Finally,the PC2600-22/520 radiator was utilized to validate the accuracy of the analytical model and the rationality of the co-optimal intervals.展开更多
A surface soil moisture model with improved spatial resolution was developed using remotely sensed apparent thermal inertia（ATI）.The model integrates the surface temperature derived from TM/ETM＋ image and the mean ...A surface soil moisture model with improved spatial resolution was developed using remotely sensed apparent thermal inertia（ATI）.The model integrates the surface temperature derived from TM/ETM＋ image and the mean surface temperature from MODIS images to improve the spatial resolution of soil temperature difference based on the heat conduction equation,which is necessary to calculate the ATI.Consequently,the spatial resolution of ATI and SMC can be enhanced from 1 km to 120 m（TM） or 60m（ETM＋）.Moreover,the enhanced ATI has a much stronger correlation coefficient（R^2） with SMC（0.789） than the surface reflectance（0.108） or the ATI derived only from MODIS images（0.264）.Based on the regression statistics of the field SMC measurement and enhanced ATI,a linear regression model with an RMS error of 1.90%was found.展开更多
As an important kind of intelligent materials,shape-memory materials have been received increasing attention on account of their interesting properties and potential applications in recent years.Particularly,the rise ...As an important kind of intelligent materials,shape-memory materials have been received increasing attention on account of their interesting properties and potential applications in recent years.Particularly,the rise of shape-memory polymers by far surpasses well-known metallic shape-memory alloys in their shape-memory properties.The advantages of polymers compared to other materials are their easier availability and their wide range of mechanical and physical properties.The polymers designed to exhibit a shape-memory effect require two components on the molecular level:crosslinks to determine the permanent shape and switching segments with Ttrans to fix the temporary shape.Up to now almost all papers on shape-memory polymers introduce switching segments with the covalent linking method.On the other hand,only several cases concern non-covalent interaction.However,the research works mentioned above is based on a single Trans(i.e.,Tm or Tg).展开更多
It is theoretically investigated the generation of higher harmonics of two-dimensional and three-dimensional terahertz electromagnetic beams in nonlinear crystals. The attention is paid to crystalline paraelectrics li...It is theoretically investigated the generation of higher harmonics of two-dimensional and three-dimensional terahertz electromagnetic beams in nonlinear crystals. The attention is paid to crystalline paraelectrics like SrTiO<sub>3</sub> under the temperatures 60 - 200 K, these crystals possess the cubic nonlinearity. The bias electric field is applied to provide the dominating quadratic nonlinearity. The initial focusing of the beams not only increases the efficiency of generation of higher harmonics, but alto makes possible to select maxima of different higher harmonics at some distances from the input. At lower temperatures the nonlinearity behaves at smaller input amplitudes, whereas at higher temperatures the harmonic generation can be observed at higher frequencies up to 1.5 THz. In three-dimensional beams the peak amplitudes of higher harmonics can be bigger than in two-dimensional beams, but the ratios of these peak values to the maximum values of the focused first harmonic are smaller than in two-dimensional beams.展开更多
The structure and seasonal variation of the East Asian Subtropical Westerly Jet （EAWJ） and associations with heating fields over East Asia are examined by using NCEP/NCAR reanalysis data. Obvious differences exist i...The structure and seasonal variation of the East Asian Subtropical Westerly Jet （EAWJ） and associations with heating fields over East Asia are examined by using NCEP/NCAR reanalysis data. Obvious differences exist in the westerly jet intensity and location in different regions and seasons due to the ocean-land distribution and seasonal thermal contrast, as well as the dynamic and thermodynamic impacts of the Tibetan Plateau. In winter, the EAWJ center is situated over the western Pacific Ocean and the intensity is reduced gradually from east to west over the East Asian region. In summer, the EAWJ center is located over the north of the Tibetan Plateau and the jet intensity is reduced evidently compared with that in winter. The EAWJ seasonal evolution is characterized by the obvious longitudinal inconsistency of the northward migration and in-phase southward retreat of the EAWJ axis. A good correspondence between the seasonal variations of EAWJ and the meridional differences of air temperature （MDT） in the mid-upper troposphere demonstrates that the MDT is the basic reason for the seasonal variation of EAWJ. Correlation analyses indicate that the Kuroshio Current region to the south of Japan and the Tibetan Plateau are the key areas for the variations of the EAWJ intensities in winter and in summer, respectively. The strong sensible and latent heating in the Kuroshio Current region is closely related to the intensification of EAWJ in winter. In summer, strong sensible heating in the Tibetan Plateau corresponds to the EAWJ strengthening and southward shift, while the weak sensible heating in the Tibetan Plateau is consistent with the EAWJ weakening and northward migration.展开更多
The annual, interannual and inter-decadal variability of convection intensity of South China Sea (SCS) summer monsoon and air-sea temperature difference in the tropical ocean is analyzed, and their relationship is dis...The annual, interannual and inter-decadal variability of convection intensity of South China Sea (SCS) summer monsoon and air-sea temperature difference in the tropical ocean is analyzed, and their relationship is discussed using two data sets of 48-a SODA (simple ocean data assimilation) and NCEP/NCAR. Analyses show that in wintertime Indian Ocean (WIO), springtime central tropical Pacific (SCTP) and summertime South China Sea-West Pacific (SSCSWP), air-sea temperature difference is significantly associated with the convection intensity of South China Sea summer monsoon. Correlation of the inter-decadal time scale (above 10 a) is higher and more stable. There is inter-decadal variability of correlation in scales less than 10 a and it is related with the air-sea temperature difference itself for corresponding waters. The inter-decadal variability of the convection intensity during the South China Sea summer monsoon is closely related to the inter-decadal variability of the general circulation of the atmosphere. Since the late period of the 1970s, in the lower troposphere, the cross-equatorial flow from the Southern Hemisphere has intensified. At the upper troposphere layer, the South Asian high and cross-equatorial flow from the Northern Hemisphere has intensified at the same time. Then the monsoon cell has also strengthened and resulted in the reinforcing of the convection of South China Sea summer monsoon.展开更多
Effective temperature level of stream, namely stream pseudo temperature, is determined by its actual temperature and heat transfer temperature difference contribution value. Heat transfer temperature difference con-tr...Effective temperature level of stream, namely stream pseudo temperature, is determined by its actual temperature and heat transfer temperature difference contribution value. Heat transfer temperature difference con-tribution value of a stream depends on its heat transfer film coefficient, cost per unit heat transfer area, actual tem-perature, and so on. In the determination of the suitable heat transfer temperature difference contribution values of the stream, the total annual cost of multistream heat exchanger network (MSHEN) is regarded as an objective func-tion, and genetic/simulated annealing algorithm (GA/SA) is adopted for optimizing the heat transfer temperature difference contribution values of the stream. The stream pseudo temperatures are subsequently obtained. On the ba-sis of stream pseudo temperature, optimized MSHEN can be attained by the temperature-enthalpy (T-H) diagram method. This approach is characterized with fewer decision variables and higher feasibility of solutions. The calcu-lation efficiency of GA/SA can be remarkably enhanced by this approach and more probability is shown in search-ing the global optimum solution. Hence this approach is presented for solving industrial-sized MSHEN which is difficult to deal by traditional algorithm. Moreover, in the optimization of stream heat transfer temperature differ-ence contribution values, the effects of the stream temperature, the heat transfer film coefficient, and the construc-tion material of heat exchangers are considered, therefore this approach can be used to optimize and design heat exchanger network (HEN) with unequal heat transfer film coefficients and different of construction materials. The performance of the proposed approach has been demonstrated with three examples and the obtained solutions are compared with those available in literatures. The results show that the large-scale MSHEN synthesis problems can be solved to obtain good solutions with the modest computational effort.展开更多
The present study compares seasonal and interdecadal variations in surface sensible heat flux over Northwest China between station observations and ERA-40 and NCEP-NCAR reanalysis data for the period 1960-2000. While ...The present study compares seasonal and interdecadal variations in surface sensible heat flux over Northwest China between station observations and ERA-40 and NCEP-NCAR reanalysis data for the period 1960-2000. While the seasonal variation in sensible heat flux is found to be consistent between station observations and the two reanalysis datasets, both land-air temperatures difference and surface wind speed show remarkable systematic differences. The sensible heat flux displays obvious interdecadal variability that is season-dependent. In the ERA-40 data, the sensible heat flux in spring, fall, and winter shows interdecadal variations that are similar to observations. In the NCEP-NCAR reanalysis data, sensible heat flux variations are inconsistent with and sometimes even opposite to observations. While surface wind speeds from the NCEP-NCAR reanalysis data show interdecadal changes consistent with station observations, variations in land-air temperature difference differ greatly from the observed dataset. In terms of land-air temperature difference and surface wind speed, almost no consistency with observations can be identified in the ERA-40 data, apart from the land-air temperature difference in fall and winter. These inconsistencies pose a major obstacle to the application in climate studies of surface sensible heat flux derived from reanalysis data.展开更多
Due to the presence of ice and unfrozen water in pores of frozen rock,the rock fracture behaviors are susceptible to temperature.In this study,the potential thawing-induced softening effects on the fracture behaviors ...Due to the presence of ice and unfrozen water in pores of frozen rock,the rock fracture behaviors are susceptible to temperature.In this study,the potential thawing-induced softening effects on the fracture behaviors of frozen rock is evaluated by testing the tension fracture toughness(KIC)of frozen rock at different temperatures(i.e.-20℃,-15℃,-12℃,-10℃,-8℃,-6℃,-4℃,-2℃,and 0℃).Acoustic emission(AE)and digital image correlation(DIC)methods are utilized to analyze the microcrack propagation during fracturing.The melting of pore ice is measured using nuclear magnetic resonance(NMR)method.The results indicate that:(1)The KIC of frozen rock decreases moderately between-20℃ and-4℃,and rapidly between-4℃ and 0℃.(2)At-20℃ to-4℃,the fracturing process,deduced from the DIC results at the notch tip,exhibits three stages:elastic deformation,microcrack propagation and microcrack coalescence.However,at-4℃e0℃,only the latter two stages are observed.(3)At-4℃e0℃,the AE activities during fracturing are less than that at-20℃ to-4℃,while more small events are reported.(4)The NMR results demonstrate a reverse variation trend in pore ice content with increasing temperature,that is,a moderate decrease is followed by a sharp decrease and-4℃ is exactly the critical temperature.Next,we interpret the thawing-induced softening effect by linking the evolution in microscopic structure of frozen rock with its macroscopic fracture behaviors as follow:from-20℃ to-4℃,the thickening of the unfrozen water film diminishes the cementation strength between ice and rock skeleton,leading to the decrease in fracture parameters.From-4℃ to 0℃,the cementation effect of ice almost vanishes,and the filling effect of pore ice is reduced significantly,which facilitates microcrack propagation and thus the easier fracture of frozen rocks.展开更多
The extreme temperature differences in fiat steel box girder of a cable-stayed bridge were studied.Firstly,by using the long-term measurement data collected by the structural health monitoring system installed on the ...The extreme temperature differences in fiat steel box girder of a cable-stayed bridge were studied.Firstly,by using the long-term measurement data collected by the structural health monitoring system installed on the Runyang Cable-stayed Bridge,the daily variations as well as seasonal ones of measured temperature differences in the box girder cross-section area were summarized.The probability distribution models of temperature differences were further established and the extreme temperature differences were estimated with a return period of 100 years.Finally,the temperature difference models in cross-section area were proposed for bridge thermal design.The results show that horizontal temperature differences in top plate and vertical temperature differences between top plate and bottom plate are considerable.All the positive and negative temperature differences can be described by the weighted sum of two Weibull distributions.The maximum positive and negative horizontal temperature differences in top plate are 10.30 ℃ and -13.80 ℃,respectively.And the maximum positive and negative vertical temperature differences between top plate and bottom plate are 17.30 ℃ and-3.70 ℃,respectively.For bridge thermal design,there are two vertical temperature difference models between top plate and bottom plate,and six horizontal temperature difference models in top plate.展开更多
The present study investigates the difference in interdecadal variability of the spring and summer sensible heat fluxes over Northwest China by using station observations from 1960 to 2000. It was found that the sprin...The present study investigates the difference in interdecadal variability of the spring and summer sensible heat fluxes over Northwest China by using station observations from 1960 to 2000. It was found that the spring sensible heat flux over Northwest China was greater during the period from the late 1970s to the 1990s than during the period from the 1960s to the mid-1970s. The summer sensible heat flux was smaller in the late 1980s through the 1990s than it was in the 1970s through the early 1980s. Both the spring and summer land-air temperature differences over Northwest China displayed an obvious interdecadal increase in the late 1970s. Both the spring and summer surface wind speeds experienced an obvious interdecadal weakening in the late 1970s. The change in the surface wind speed played a more important role in the interdecadal variations in sensible heat flux during the summer, whereas the change in the land-air temperature difference was more important for the interdecadal variations in sensible heat flux in the spring. This difference was related to seasonal changes in the mean land-air temperature difference and the surface wind speed. Further analysis indicated that the increase in the spring land surface temperature in Northwest China was related to an increase in surface net radiation.展开更多
The present study documents the variability of surface sensible heat flux over Northwest China using station observations for the period 1961 2000.It is found that the afternoon and nighttime sensible heat flux variat...The present study documents the variability of surface sensible heat flux over Northwest China using station observations for the period 1961 2000.It is found that the afternoon and nighttime sensible heat flux variations are remarkably different.The variability of the instant flux in the afternoon is much larger than in the nighttime.The afternoon and nighttime flux anomalies tend to be opposite.The diurnal and seasonal dependence of sensible heat flux variations is closely related to the diurnal cycle of mean land-air temperature difference.The relationship of sensible heat flux with land-air temperature difference based on the instant value differs from that based on the daily mean.The present study indicates the importance for the models to properly simulate mean land-air temperature difference and its diurnal and seasonal variations in order to capture surface sensible heat flux variability over Northwest China and predicts its plausible impacts on climate.展开更多
Single cell temperature difference of lithium-ion battery(LIB) module will significantly affect the safety and cycle life of the battery. The reciprocating air-flow module created by a periodic reversal of the air flo...Single cell temperature difference of lithium-ion battery(LIB) module will significantly affect the safety and cycle life of the battery. The reciprocating air-flow module created by a periodic reversal of the air flow was investigated in an effort to mitigate the inherent temperature gradient problem of the conventional battery system with a unidirectional coolant flow with computational fluid dynamics(CFD). Orthogonal experiment and optimization design method based on computational fluid dynamics virtual experiments were developed. A set of optimized design factors for the cooling of reciprocating air flow of LIB thermal management was determined. The simulation experiments show that the reciprocating flow can achieve good heat dissipation, reduce the temperature difference, improve the temperature homogeneity and effectively lower the maximal temperature of the modular battery. The reciprocating flow improves the safety, long-term performance and life span of LIB.展开更多
文摘The densification and the fractal dimensions of carbon-nickel films annealed at different temperatures 300, 500, 800, and 1000℃ with emphasis on porosity evaluation are investigated. For this purpose, the refractive index of films is determined from transmittance spectra. Three different regimes are identified, T 〈 500℃, 500℃ 〈 T 〈 800℃ and T 〉 800℃. The Rutherford baekscattering spectra show that with increasing the annealing temperature, the concentration of nickel atoms into films decreases. It is shown that the effect of annealing temperatures for increasing films densification at T 〈 500℃ and T 〉 800℃ is greater than the effect of nickel concentrations. It is observed that the effect of decreasing nickel atoms into films at 500℃ 〈 T 〈 800℃ strongly causes improving porosity and decreasing densification. The fractal dimensions of carbon-nickel films annealed from 300 to 500℃ are increased, while from 500 to 1000℃ these characteristics are decreased. It can be seen that at 800℃, films have maximum values of porosity and roughness.
基金Supported by the National Basic Research Program of China under Grant Nos 2010CB832902 and 91026002the National Natural Science Foundation of China under Grant No U1232121
文摘Modified novel high silicon steel （MNHS, a newly developed reduced-activation martensitic alloy） and commercial alloy Tgl are implanted with 200 keV He2＋ ions to a dose of 5 × 1020 ions/m2 at 300, 450 and 560~C. Transmission electron microscopy （TEM） is used to characterize the size and morphology of He bubbles. With the increase of the implantation temperature, TEM observations indicate that bubbles increase in size and the proportion of ＇brick shaped＇ cuboid bubbles increases while the proportion of polyhedral bubbles decreases in both the steel samples. For the samples implanted at the same temperature, the average size of He bubbles in MNHS is smaller than that in T91. This might be due to the abundance of boundaries and precipitates in MNHS, which provide additional sites for the trapping of He atoms, thus reduce the susceptibility of MNHS to He embrittlement.
文摘The viscosities, η, and ultrasonic speeds, u, of pure benzene, triethylamine, （TEA） tributylamine, （TBA）, and those of their binary mixtures, with benzene as common component, covering the whole composition range have been measured at 278.15 K, 283.15 K, 288.15 K, 293.15 K, 298.15 K, 303.15 K, 308.15 K, 313.15 K, and 318.15 K. From the experimental data the deviations in viscosity, △η, deviations in Gibbs free energy, AG, deviations in ultrasonic speed, △u, deviations in entropies, △S^＊, and deviations in enthalpies, △H^＊, of activation of viscous flow have been determined. The sign and magnitude of these parameters were found to be sensitive towards interactions prevailing in the studied systems. Further, the excess molar volumes, VE, were calculated using data for the binary mixtures. Moreover, theoretical values of viscosities and ultrasonic speeds of the binary mixtures were calculated using different empirical relations and theories. The results were in experimental and theoretical values. discussed in terms of average deviations （AD）
文摘LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)cathode material is prepared by sol-gel method and the effects of Nb^(5+)doping and different calcination temperatures on cathode materials were deeply investigated.Structural and morphological characterizations revealed that the optimal content of 1 mol%Nb^(5+)can stabilize layered structures,mitigate Ni^(2+)migration to Li layers,improve lithium diffusion capacity,and reduce lattice expansion/shrinkage while cycling.And calcination temperature at 800℃can not only ensure good morphology,but also suppress the mixed discharge of lithium and nickel in the internal structure.Electrochemical performance evaluation revealed that Nb^(5+)doping improves the discharge-specific capacity of the material,which is conducive to ameliorating its rate capability and cycle performance.And the material at 800℃exhibits the highest discharge specific capacity,the best magnification performance,low polarizability,and the best cycle reversibility.
基金Supported by the National Natural Science Foundation of China under Grant No 61334001the National Key Research and Development Program of China under Grant Nos 2016YFB0400600,2016YFB0400601 and 2016YFB0400100+1 种基金the National Science Foundation for Young Scientists of China under Grant No 21405076the Fund for Less Developed Regions of the National Natural Science Foundation of China under Grant No 11364034
文摘InGaN-based green light-emitting diodes （LEDs） with different growth temperatures of superlattice grown on Si （111） substrates are investigated by temperature-dependent electroluminescence between 100 K and 350K. It is observed that with the decrease of the growth temperature of the superlattice from 895℃ to 855℃, the forward voltage decreases, especially at low temperature. We presume that this is due to the existence of the larger average size of V-shaped pits, which is determined by secondary ion mass spectrometer measurements. Meanwhile, the sample with higher growth temperature of superlattice shows a severer efficiency droop at cryogenic temperatures （about 100 K-150 K）. Electron overflow into p-GaN is considered to be the cause of such phenomena, which is relevant to the poorer hole injection into multiple quantum wells and the more reduced effective active volume in the active region.
基金partially supported by the Generation Challenge Program,CIMMYT(International Maize and Wheat Improvement Center)(GCP,G7010.02.01)the earmarked fund for China Agriculture Research System(CARS-3-2-3)the National Key Technology R&D Program of China(2016YFD0100502,2016YFD0300407)
文摘Heat stress seriously affects wheat production in many regions of the world. At present, heat tolerance research remains one of the least understood fields in wheat genetics and breeding and there is a lack of effective methods to quantify heat stress and heat tolerance in different wheat cultivars. The objective of this study was to use various wheat cultivars to evaluate stress intensity(δ) and a new method for quantification of heat tolerance and compare this technique with three other currently utilized methods. This new parameter for heat tolerance quantification is referred to as the heat tolerance index(HTI) and is an indicator of both yield potential and yield stability. Heat treatments were applied in a controlled setting when anthesis had been reached for 80% of the wheat. The stress intensity evaluation indicated heat shock was the main factor associated with kernel weight reduction while grain yield reduction was mainly associated with chronic high temperature. The methods evaluation showed that a temperature difference of 5°C from natural temperatures was a suitable heat treatment to compare to the untreated controls. HTI was positively correlated with yield under heat stress(r=0.8657, δ=0.15, in 2009–2010; r=0.8418, δ=0.20, in 2010–2011; P<0.01), and negatively correlated with yield reduction rate(r=–0.8344, in 2009–2010; r=–0.7158, in 2010–2011; P<0.01). The results of this study validated the use of HTI and temperature difference control for quantifying wheat heat tolerance that included the yield potential and the stability of different wheat cultivars under heat stress. Additionally, 10 wheat cultivars showed high HTI and should be further tested for their heat confirming characteristics for use in wheat heat tolerance breeding.
文摘We have studied numerically a simple crack growth model in a two-dimensional triangular lattice of bonds and nodes which incorporates the surface of a growing crack bond-breaking probability P-i similar to exp{(-V-i+E(i))phi(T)}, where E(i) is elastic energy stored in the i-th bond. Different energy temperature factors phi(T) are employed during crack formation and propagation process with a uniform dilation strain case and a shear case and with periodic boundary condition in the horizontal direction. Our results show that the patterns of the cracks generated are fractal structure and the effective fractal dimensionalities decrease with the increase of the temperature factor phi(T)(the absolute temperature T decreasing). In the paper we also discuss the relation between the effective fractal dimension D-eff (the radius R(g) of gyration) and the fractal dimensions D (the radius R of circular), and also give their modification values Omega about two kinds of methods in the lattice model.
基金supported in part by the National Natural Science Foundation of China under Grant 52207180Guangdong Basic and Applied Basic Research Foundation under Grant 2021A1515110435Anhui Provincial Natural Science Foundation under Grant 2208085UD18.
文摘Radiator cooling configurations need to account for both efficient heat dissipation and energy conservation requirements.Rapid and rational determination of cooling system configurations constitutes a critical aspect of transformer design,enhancing electrical power energy utilization efficiency.Computational fluid dynamics(CFD)is widely recognized as a well-established technique for simulating and optimizing heat dissipation systems.However,this approach is time-consuming because of pre-processing procedures,such as meshing.This paper proposes a fast iterative optimization model for calculating the outlet oil temperature and airflow distribution.Based on the analytical model results,this paper identifies the optimal energy-saving range for radiator cooling configurations,incorporating the cooperative effects of cooling efficiency,air pressure drop during heat transfer,and inlet–outlet temperature difference.The analytical model demonstrated errors in energy dissipation and temperature difference calculations within an acceptable range.The calculation time was reduced by more than 99%.Radiator configurations within the optimal range effectively minimize energy waste while meeting the target temperature difference and enhancing cooling efficiency.Finally,the PC2600-22/520 radiator was utilized to validate the accuracy of the analytical model and the rationality of the co-optimal intervals.
基金Project (2013CB227904) supported by the National Basic Research Program of ChinaProject (2012QNB09) supported by the Fundamental Research Funds for the Central University,ChinaProject (NCET-12-0956) supported by the Program for New Century Excellent Talents
文摘A surface soil moisture model with improved spatial resolution was developed using remotely sensed apparent thermal inertia（ATI）.The model integrates the surface temperature derived from TM/ETM＋ image and the mean surface temperature from MODIS images to improve the spatial resolution of soil temperature difference based on the heat conduction equation,which is necessary to calculate the ATI.Consequently,the spatial resolution of ATI and SMC can be enhanced from 1 km to 120 m（TM） or 60m（ETM＋）.Moreover,the enhanced ATI has a much stronger correlation coefficient（R^2） with SMC（0.789） than the surface reflectance（0.108） or the ATI derived only from MODIS images（0.264）.Based on the regression statistics of the field SMC measurement and enhanced ATI,a linear regression model with an RMS error of 1.90%was found.
基金Supported by the National Natural Science Foundation of China(Grant No.50373045)
文摘As an important kind of intelligent materials,shape-memory materials have been received increasing attention on account of their interesting properties and potential applications in recent years.Particularly,the rise of shape-memory polymers by far surpasses well-known metallic shape-memory alloys in their shape-memory properties.The advantages of polymers compared to other materials are their easier availability and their wide range of mechanical and physical properties.The polymers designed to exhibit a shape-memory effect require two components on the molecular level:crosslinks to determine the permanent shape and switching segments with Ttrans to fix the temporary shape.Up to now almost all papers on shape-memory polymers introduce switching segments with the covalent linking method.On the other hand,only several cases concern non-covalent interaction.However,the research works mentioned above is based on a single Trans(i.e.,Tm or Tg).
文摘It is theoretically investigated the generation of higher harmonics of two-dimensional and three-dimensional terahertz electromagnetic beams in nonlinear crystals. The attention is paid to crystalline paraelectrics like SrTiO<sub>3</sub> under the temperatures 60 - 200 K, these crystals possess the cubic nonlinearity. The bias electric field is applied to provide the dominating quadratic nonlinearity. The initial focusing of the beams not only increases the efficiency of generation of higher harmonics, but alto makes possible to select maxima of different higher harmonics at some distances from the input. At lower temperatures the nonlinearity behaves at smaller input amplitudes, whereas at higher temperatures the harmonic generation can be observed at higher frequencies up to 1.5 THz. In three-dimensional beams the peak amplitudes of higher harmonics can be bigger than in two-dimensional beams, but the ratios of these peak values to the maximum values of the focused first harmonic are smaller than in two-dimensional beams.
基金the National Natural Science Foundation of China(Grant No.40333026)
文摘The structure and seasonal variation of the East Asian Subtropical Westerly Jet （EAWJ） and associations with heating fields over East Asia are examined by using NCEP/NCAR reanalysis data. Obvious differences exist in the westerly jet intensity and location in different regions and seasons due to the ocean-land distribution and seasonal thermal contrast, as well as the dynamic and thermodynamic impacts of the Tibetan Plateau. In winter, the EAWJ center is situated over the western Pacific Ocean and the intensity is reduced gradually from east to west over the East Asian region. In summer, the EAWJ center is located over the north of the Tibetan Plateau and the jet intensity is reduced evidently compared with that in winter. The EAWJ seasonal evolution is characterized by the obvious longitudinal inconsistency of the northward migration and in-phase southward retreat of the EAWJ axis. A good correspondence between the seasonal variations of EAWJ and the meridional differences of air temperature （MDT） in the mid-upper troposphere demonstrates that the MDT is the basic reason for the seasonal variation of EAWJ. Correlation analyses indicate that the Kuroshio Current region to the south of Japan and the Tibetan Plateau are the key areas for the variations of the EAWJ intensities in winter and in summer, respectively. The strong sensible and latent heating in the Kuroshio Current region is closely related to the intensification of EAWJ in winter. In summer, strong sensible heating in the Tibetan Plateau corresponds to the EAWJ strengthening and southward shift, while the weak sensible heating in the Tibetan Plateau is consistent with the EAWJ weakening and northward migration.
基金This study was supported by the project of the National Natural Science Foundation of China"Response of inter-decadal variability of South China Sea summer monsoon to the whole globe variability”under contract number 9021l010“Interannual to interdecadal variability in circulation in the tropical Pa-cific Ocean”under contract number 40136010.
文摘The annual, interannual and inter-decadal variability of convection intensity of South China Sea (SCS) summer monsoon and air-sea temperature difference in the tropical ocean is analyzed, and their relationship is discussed using two data sets of 48-a SODA (simple ocean data assimilation) and NCEP/NCAR. Analyses show that in wintertime Indian Ocean (WIO), springtime central tropical Pacific (SCTP) and summertime South China Sea-West Pacific (SSCSWP), air-sea temperature difference is significantly associated with the convection intensity of South China Sea summer monsoon. Correlation of the inter-decadal time scale (above 10 a) is higher and more stable. There is inter-decadal variability of correlation in scales less than 10 a and it is related with the air-sea temperature difference itself for corresponding waters. The inter-decadal variability of the convection intensity during the South China Sea summer monsoon is closely related to the inter-decadal variability of the general circulation of the atmosphere. Since the late period of the 1970s, in the lower troposphere, the cross-equatorial flow from the Southern Hemisphere has intensified. At the upper troposphere layer, the South Asian high and cross-equatorial flow from the Northern Hemisphere has intensified at the same time. Then the monsoon cell has also strengthened and resulted in the reinforcing of the convection of South China Sea summer monsoon.
基金Supported by the Deutsche Forschungsgemeinschaft (DFG No.RO 294/9).
文摘Effective temperature level of stream, namely stream pseudo temperature, is determined by its actual temperature and heat transfer temperature difference contribution value. Heat transfer temperature difference con-tribution value of a stream depends on its heat transfer film coefficient, cost per unit heat transfer area, actual tem-perature, and so on. In the determination of the suitable heat transfer temperature difference contribution values of the stream, the total annual cost of multistream heat exchanger network (MSHEN) is regarded as an objective func-tion, and genetic/simulated annealing algorithm (GA/SA) is adopted for optimizing the heat transfer temperature difference contribution values of the stream. The stream pseudo temperatures are subsequently obtained. On the ba-sis of stream pseudo temperature, optimized MSHEN can be attained by the temperature-enthalpy (T-H) diagram method. This approach is characterized with fewer decision variables and higher feasibility of solutions. The calcu-lation efficiency of GA/SA can be remarkably enhanced by this approach and more probability is shown in search-ing the global optimum solution. Hence this approach is presented for solving industrial-sized MSHEN which is difficult to deal by traditional algorithm. Moreover, in the optimization of stream heat transfer temperature differ-ence contribution values, the effects of the stream temperature, the heat transfer film coefficient, and the construc-tion material of heat exchangers are considered, therefore this approach can be used to optimize and design heat exchanger network (HEN) with unequal heat transfer film coefficients and different of construction materials. The performance of the proposed approach has been demonstrated with three examples and the obtained solutions are compared with those available in literatures. The results show that the large-scale MSHEN synthesis problems can be solved to obtain good solutions with the modest computational effort.
基金supported by the National Basic Research Program of China(Grant No.2009CB421405)the National Natural Science Foundationof China(Grant Nos.40730952 and 40905027)+1 种基金the Program of Knowledge Innovation for the 3rd period of Chinese Academy of Sciences(Grant No.KZCX2-YW-220)IAP07414
文摘The present study compares seasonal and interdecadal variations in surface sensible heat flux over Northwest China between station observations and ERA-40 and NCEP-NCAR reanalysis data for the period 1960-2000. While the seasonal variation in sensible heat flux is found to be consistent between station observations and the two reanalysis datasets, both land-air temperatures difference and surface wind speed show remarkable systematic differences. The sensible heat flux displays obvious interdecadal variability that is season-dependent. In the ERA-40 data, the sensible heat flux in spring, fall, and winter shows interdecadal variations that are similar to observations. In the NCEP-NCAR reanalysis data, sensible heat flux variations are inconsistent with and sometimes even opposite to observations. While surface wind speeds from the NCEP-NCAR reanalysis data show interdecadal changes consistent with station observations, variations in land-air temperature difference differ greatly from the observed dataset. In terms of land-air temperature difference and surface wind speed, almost no consistency with observations can be identified in the ERA-40 data, apart from the land-air temperature difference in fall and winter. These inconsistencies pose a major obstacle to the application in climate studies of surface sensible heat flux derived from reanalysis data.
基金We acknowledge the funding support from the National Natural Science Foundation of China(Grant No.42271148).
文摘Due to the presence of ice and unfrozen water in pores of frozen rock,the rock fracture behaviors are susceptible to temperature.In this study,the potential thawing-induced softening effects on the fracture behaviors of frozen rock is evaluated by testing the tension fracture toughness(KIC)of frozen rock at different temperatures(i.e.-20℃,-15℃,-12℃,-10℃,-8℃,-6℃,-4℃,-2℃,and 0℃).Acoustic emission(AE)and digital image correlation(DIC)methods are utilized to analyze the microcrack propagation during fracturing.The melting of pore ice is measured using nuclear magnetic resonance(NMR)method.The results indicate that:(1)The KIC of frozen rock decreases moderately between-20℃ and-4℃,and rapidly between-4℃ and 0℃.(2)At-20℃ to-4℃,the fracturing process,deduced from the DIC results at the notch tip,exhibits three stages:elastic deformation,microcrack propagation and microcrack coalescence.However,at-4℃e0℃,only the latter two stages are observed.(3)At-4℃e0℃,the AE activities during fracturing are less than that at-20℃ to-4℃,while more small events are reported.(4)The NMR results demonstrate a reverse variation trend in pore ice content with increasing temperature,that is,a moderate decrease is followed by a sharp decrease and-4℃ is exactly the critical temperature.Next,we interpret the thawing-induced softening effect by linking the evolution in microscopic structure of frozen rock with its macroscopic fracture behaviors as follow:from-20℃ to-4℃,the thickening of the unfrozen water film diminishes the cementation strength between ice and rock skeleton,leading to the decrease in fracture parameters.From-4℃ to 0℃,the cementation effect of ice almost vanishes,and the filling effect of pore ice is reduced significantly,which facilitates microcrack propagation and thus the easier fracture of frozen rocks.
基金Project(51178100)supported by the National Natural Science Foundation of ChinaProject(1105007001)supported by the Foundation of the Priority Academic Development Program of Higher Education Institute of Jiangsu Province,ChinaProject(3205001205)supported by the Teaching and Research Foundation for Excellent Young Teachers of Southeast University,China
文摘The extreme temperature differences in fiat steel box girder of a cable-stayed bridge were studied.Firstly,by using the long-term measurement data collected by the structural health monitoring system installed on the Runyang Cable-stayed Bridge,the daily variations as well as seasonal ones of measured temperature differences in the box girder cross-section area were summarized.The probability distribution models of temperature differences were further established and the extreme temperature differences were estimated with a return period of 100 years.Finally,the temperature difference models in cross-section area were proposed for bridge thermal design.The results show that horizontal temperature differences in top plate and vertical temperature differences between top plate and bottom plate are considerable.All the positive and negative temperature differences can be described by the weighted sum of two Weibull distributions.The maximum positive and negative horizontal temperature differences in top plate are 10.30 ℃ and -13.80 ℃,respectively.And the maximum positive and negative vertical temperature differences between top plate and bottom plate are 17.30 ℃ and-3.70 ℃,respectively.For bridge thermal design,there are two vertical temperature difference models between top plate and bottom plate,and six horizontal temperature difference models in top plate.
基金supported by the National Natural Science Foundation of China (Grant No. 40730952)the National Basic Research Program of China (Grant No. 2009CB421405)the Program of Knowledge Innovation for the third period, the Chinese Academy of Sciences (Grant No. KZCX2-YW-220), and IAP07414
文摘The present study investigates the difference in interdecadal variability of the spring and summer sensible heat fluxes over Northwest China by using station observations from 1960 to 2000. It was found that the spring sensible heat flux over Northwest China was greater during the period from the late 1970s to the 1990s than during the period from the 1960s to the mid-1970s. The summer sensible heat flux was smaller in the late 1980s through the 1990s than it was in the 1970s through the early 1980s. Both the spring and summer land-air temperature differences over Northwest China displayed an obvious interdecadal increase in the late 1970s. Both the spring and summer surface wind speeds experienced an obvious interdecadal weakening in the late 1970s. The change in the surface wind speed played a more important role in the interdecadal variations in sensible heat flux during the summer, whereas the change in the land-air temperature difference was more important for the interdecadal variations in sensible heat flux in the spring. This difference was related to seasonal changes in the mean land-air temperature difference and the surface wind speed. Further analysis indicated that the increase in the spring land surface temperature in Northwest China was related to an increase in surface net radiation.
基金supported by the National Basic Research Program of China (Grant No. 2009CB421405)the National Natural Science Foundation of China (Grant Nos.40905027 and 40730952)Program of Knowledge Innovationfor the 3rd period of Chinese Academy of Sciences (Grant No.KZCX2-YW-220)
文摘The present study documents the variability of surface sensible heat flux over Northwest China using station observations for the period 1961 2000.It is found that the afternoon and nighttime sensible heat flux variations are remarkably different.The variability of the instant flux in the afternoon is much larger than in the nighttime.The afternoon and nighttime flux anomalies tend to be opposite.The diurnal and seasonal dependence of sensible heat flux variations is closely related to the diurnal cycle of mean land-air temperature difference.The relationship of sensible heat flux with land-air temperature difference based on the instant value differs from that based on the daily mean.The present study indicates the importance for the models to properly simulate mean land-air temperature difference and its diurnal and seasonal variations in order to capture surface sensible heat flux variability over Northwest China and predicts its plausible impacts on climate.
基金Project(50803008)supported by the National Natural Science Foundation of ChinaProjects(14JJ4035,2011RS4067)supported by the Natural Science Foundation of Hunan Province,China+1 种基金Project(2013-sdllmd-08)supported by the State Key Laboratory of Luminescent Materials and Devices(South China University of Technology),ChinaProjects(20100480946,201104508)supported by the China Postdoctoral Science Foundation,China
文摘Single cell temperature difference of lithium-ion battery(LIB) module will significantly affect the safety and cycle life of the battery. The reciprocating air-flow module created by a periodic reversal of the air flow was investigated in an effort to mitigate the inherent temperature gradient problem of the conventional battery system with a unidirectional coolant flow with computational fluid dynamics(CFD). Orthogonal experiment and optimization design method based on computational fluid dynamics virtual experiments were developed. A set of optimized design factors for the cooling of reciprocating air flow of LIB thermal management was determined. The simulation experiments show that the reciprocating flow can achieve good heat dissipation, reduce the temperature difference, improve the temperature homogeneity and effectively lower the maximal temperature of the modular battery. The reciprocating flow improves the safety, long-term performance and life span of LIB.
