Cost-effectiveness analysis（CEA） is increasingly important in health care decision making.Cost-effectiveness threshold is a critical parameter in the cost-effectiveness analysis.This review introduces the concept of...Cost-effectiveness analysis（CEA） is increasingly important in health care decision making.Cost-effectiveness threshold is a critical parameter in the cost-effectiveness analysis.This review introduces the concept of cost-effectiveness threshold, summarizes its determining methods,and classifies the existing methods into two kinds according to budget constraints,then analyzes the merit and demerit of every methods.When there is a flexible budget,the methods for determining the cost-effectiveness threshold include inferring the threshold from previous decisions,comparison with other health care technology or transfer from elsewhere in the public sector,social willingness-to-pay approach,GDP per capita criteria,and rule of thumb.When there is a fixed budget,the methods for determining the cost-effectiveness threshold include shadow price approach,opportunity cost approach,and ICER threshold-searcher model.Each approach to determining threshold has its strength and weakness.The aim of this article is to introduce the existing methods and discuss the features of each method.The background information,such as the definition of threshold,is also described.The basic theory of cost-effectiveness threshold is elaborated,and we recommend the establishment of a cost-effectiveness threshold in the Chinese health care.展开更多
Due to various reasons, the inspection methods often need to be changed, and the detection reagents often need to be replaced. In this study, a comparative experiment was conducted between the ethanol-based and ether-...Due to various reasons, the inspection methods often need to be changed, and the detection reagents often need to be replaced. In this study, a comparative experiment was conducted between the ethanol-based and ether-based determination methods for oil content in imported wool. The determination results obtained from the two methods were treated as abscissa and ordinate respectively,and their linear relationship was analyzed. According to the linear regression analysis, the conversion equation of determination result between the two methods was obtained. In addition, the repeatability admissible error and reproducibility admissible error were established through analyzing the comparative experimental results by scientific software. This study will bring new ideas for further researches in this field, and provide reference for solving the similar problems in actual inspection work.展开更多
The hydroxyl radical(·OH)has a crucial function in the oxidation and removal of many atmospheric compounds that are harmful to health.Nevertheless,high reactivity,low atmospheric abundance,determination of hydrox...The hydroxyl radical(·OH)has a crucial function in the oxidation and removal of many atmospheric compounds that are harmful to health.Nevertheless,high reactivity,low atmospheric abundance,determination of hydroxyl,and hydroperoxyl radical’s quantity is very difficult.In the atmosphere and troposphere,hydroperoxyl radicals(HO_(2))are closely demanded in the chemical oxidation of the troposphere.But advances in technology have allowed researchers to improve the determination methods on the research of free radicals through some spectroscopic techniques.So far,several methods such as laser-induced fluorescence(LIF),high-performance liquid chromatography(HPLC),and chemical ionization mass spectroscopy have been identified and mostly used in determining the quantity of hydroxyl and hydroperoxyl radicals.In this systematic review,we have advised the use of scavenger as an advance for further researchers to circumvent some of these problems caused by free radicals.The primary goal of this review is to deepen our understanding of the functions of the most critical free radical(·OH,HO_(2))and also understand the currently used methods to quantify them in the atmosphere and troposphere.展开更多
Degradation rate of feed proteins in rumen is a basic indicator of new intestinal protein system of ruminants. In this paper, determination methods of degradation rate in tureen including in-vivo method, nylon bag met...Degradation rate of feed proteins in rumen is a basic indicator of new intestinal protein system of ruminants. In this paper, determination methods of degradation rate in tureen including in-vivo method, nylon bag method and artificial rumen method are compared in order to provide a reference for animal nutrition.展开更多
A method to determine the design value of the extreme wave height is introduced in this paper. The method is, based on the theoretical distribution of wave heights or the experiential probability distribution of wave ...A method to determine the design value of the extreme wave height is introduced in this paper. The method is, based on the theoretical distribution of wave heights or the experiential probability distribution of wave heights, to calculate the mode of the extreme wave height and the design value with good assuredness. In fitting the experiential distribution of the observed wave heights, the paper adopts the simulating function of F(x) = 1 - exp[ ?axb exp( -cxd )] and the non-linear parameter in the function is determined by the Non-Linear Least Square Method. The practical application of the method has proved that it is not only simple and convenient, but also very effective in engineering design practice.展开更多
The time-dependent Jones Wilkins-Lee equation products for aluminized explosives. To obtain the of state （JWL-EOS） is applied to describe detonation state time-dependent JWL-EOS parameters, cylinder tests and underw...The time-dependent Jones Wilkins-Lee equation products for aluminized explosives. To obtain the of state （JWL-EOS） is applied to describe detonation state time-dependent JWL-EOS parameters, cylinder tests and underwater explosion experiments are performed. According to the result of the wall radial velocity in cylinder tests and the shock wave pressures in underwater explosion experiments, the time-dependent JWL-EOS parameters are determined by iterating these variables in AUTODYN hydroeode simulations until the experimental values are reproduced. In addition, to verify the reliability of the derived JWL-EOS parameters, the aluminized explosive experiment is conducted in concrete. The shock wave pressures in the affected concrete bodies are measured by using manganin pressure sensors, and the rod velocity is obtained by using a high-speed camera. Simultaneously, the shock wave pressure and the rod velocity are calculated by using the derived time-dependent JWL equation of state. The calculated results are in good agreement with the experimental data.展开更多
The acute toxic effects of ammonium sulphate to fresh-water catfish, Heteropneustes fossilis (H.fossilis) have been studied by determining LC50 values with 95% confidence limits, by the graphic method, the logistic me...The acute toxic effects of ammonium sulphate to fresh-water catfish, Heteropneustes fossilis (H.fossilis) have been studied by determining LC50 values with 95% confidence limits, by the graphic method, the logistic method, the Spearman and Karber method and the trimmed Spearman-Karber method. The trimmed Spearman-Karber method was found the most ideal for ammonium salt toxicity test. The flaws in the trimmed Spearman-Karber method are also discussed.展开更多
A single three point bend specimen compliance method for determining JIC of high strength high fracture toughness steels is presented and a formula for calculatinff J-integral is proposed as follows.It is simple and v...A single three point bend specimen compliance method for determining JIC of high strength high fracture toughness steels is presented and a formula for calculatinff J-integral is proposed as follows.It is simple and valid for high strength high fracture toughness steels. The values of JIC and KIC measured by this method are in good agreement with those measured by standard test method.展开更多
In human subjects,morphine is extensively metabolized to form(M3G)and morphine-6-glucuronide(M6G).This article established a sensitive LC-MS/MS method that allows the quantification of morphine and its glucuronide met...In human subjects,morphine is extensively metabolized to form(M3G)and morphine-6-glucuronide(M6G).This article established a sensitive LC-MS/MS method that allows the quantification of morphine and its glucuronide metabolites.展开更多
Based on the field destructive test of six rock-socketed piles with shallow overburden,three prediction models are used to quantitatively analyze and predict the intact load−displacement curve.The predicted values of ...Based on the field destructive test of six rock-socketed piles with shallow overburden,three prediction models are used to quantitatively analyze and predict the intact load−displacement curve.The predicted values of ultimate uplift capacity were further determined by four methods(displacement controlling method(DCM),reduction coefficient method(RCM),maximum curvature method(MCM),and critical stiffness method(CSM))and compared with the measured value.Through the analysis of the relationship between the change rate of pullout stiffness and displacement,a method used to determine the ultimate uplift capacity via non-intact load−displacement curve was proposed.The results show that the predicted value determined by DCM is more conservative,while the predicted value determined by MCM is larger than the measured value.This suggests that RCM and CSM in engineering applications can be preferentially applied.Moreover,the development law of the change rate of pullout stiffness with displacement agrees well with the attenuation form of power function.The theoretical predicted results of ultimate uplift capacity based on the change rate of pullout stiffness will not be affected by the integrity of the curve.The method is simple and applicable for the piles that are not loaded to failure state,and thus provides new insights into ultimate uplift capacity determination of test piles.展开更多
Coal seam gas content is frequently measured in quantity during underground coal mining operation and coalbed methane(CBM)exploration as a significant basic parameter.Due to the calculation error of lost gas and resid...Coal seam gas content is frequently measured in quantity during underground coal mining operation and coalbed methane(CBM)exploration as a significant basic parameter.Due to the calculation error of lost gas and residual gas in the direct method,the efficiency and accuracy of the current methods are not inadequate to the large area multi-point measurement of coal seam gas content.This paper firstly deduces a simplified theoretical dynamic model for calculating lost gas based on gas dynamic diffusion theory.Secondly,the effects of various factors on gas dynamic diffusion from coal particle are experimentally studied.And sampling procedure of representative coal particle is improved.Thirdly,a new estimation method of residual gas content based on excess adsorption and competitive adsorption theory is proposed.The results showed that the maximum error of calculating the losing gas content by using the new simplified model is only 4%.Considering the influence of particle size on gas diffusion law,the particle size of the collected coal sample is below 0.25 mm,which improves the measurement speed and reflects the safety representativeness of the sample.The determination time of gas content reduced from 36 to 3 h/piece.Moreover,the absolute error is 0.15–0.50 m^3/t,and the relative error is within 5%.A new engineering method for determining the coal seam gas content is developed according to the above research.展开更多
The law of mathematical statistics, which the coal vitrinite reflectance index obeys, the existing vitrinite representing deviations, and the advantages of judging coalification and the shortage of judging coal type w...The law of mathematical statistics, which the coal vitrinite reflectance index obeys, the existing vitrinite representing deviations, and the advantages of judging coalification and the shortage of judging coal type were analyzed. The advantages and disadvantages of various determination methods and the expression index and different methods of identifying vitrinite on the determination results were compared. The vitality of coal vitrinite reflectance depends on its full play the unique function of reflectance histogram and the systematic errors between different determination methods do not affect the application based on reflectance histogram are considered.展开更多
A method for rapid determination of silicon content in rice was introduced. The reliability of this method was verified by using a recombinant inbred line （RIL） population of rice cross Zhenshan 97B / Milyang 46. Tw...A method for rapid determination of silicon content in rice was introduced. The reliability of this method was verified by using a recombinant inbred line （RIL） population of rice cross Zhenshan 97B / Milyang 46. Two hundred and forty-nine RILs were transplanted in two replications. Simple correlation coefficients on the silicon content in the hull, flag leaf and stern in rice between duplicate samples of 498 rice materials were 0.97954, 0.97026 and 0.98848, respectively. Ten representative samples were selected for measurement using the high-temperature alkaline fusion method. Simple correlation coefficient between the silicon contents determined by the high-temperature alkaline fusion method and by the present method is 0.9993.展开更多
As more attention is being paid to the characteristics of atmospheric amines,there is also an increasing demand for reliable detection technologies.Herein,a method was developed for simultaneous detection of atmospher...As more attention is being paid to the characteristics of atmospheric amines,there is also an increasing demand for reliable detection technologies.Herein,a method was developed for simultaneous detection of atmospheric amines in both gaseous and particulate phases using gas chromatography-mass spectrometry(GC-MS).The amine samples were collected with and without phosphoric acid filters,followed by derivatization with benzenesulfonyl chloride under alkaline condition prior to GC-MS analysis.Furthermore,the method was optimized and validated for determining 14 standard amines.The detection limits ranged from0.0408-0.421μg/mL(for gaseous samples)and 0.163-1.69μg/mL(for particulate samples),respectively.The obtained recoveries ranged from 68.8%-180%and the relative standard deviation was less than 30%,indicating high precision and good reliability of the method.Seven amines were simultaneously detected in gaseous and particulate samples in an industrial park using the developed method successfully.Methylamine,dimethylamine and diethylamine together accounted for 76.7%and 75.6%of particulate and gaseous samples,respectively.By comparing the measured and predicted values of gas-particle partition fractions,it was found that absorption process of aqueous phase played a more important role in the gas-partition of amines than physical adsorption.Moreover,the reaction between unprotonated amines and acid(aq.)in water phase likely promoted water absorption.Higher measured partition fraction of dibutylamine was likely due to the reaction with gaseous HCl.The developed method would help provide a deeper understanding of gas-particle partitioning as well as atmospheric evolution of amines.展开更多
A new analytical method using Back-Propagation (BP) artificial neural network and kinetic spectrophotometry for simultaneous determination of iron and magnesium in tap water, the Yellow River water and seawater is est...A new analytical method using Back-Propagation (BP) artificial neural network and kinetic spectrophotometry for simultaneous determination of iron and magnesium in tap water, the Yellow River water and seawater is established. By conditional experiments, the optimum analytical conditions and parameters are obtained. Levenberg-Marquart (L-M) algorithm is used for calculation in BP neural network. The topological structure of three-layer BP ANN network architecture is chosen as 15-16-2 (nodes). The initial value of gradient coefficient μ is fixed at 0.001 and the increase factor and reduction factor of μ take the default values of the system. The data are processed by computers with our own programs written in MATLAB 7.0. The relative standard deviation of the calculated results for iron and manganese is 2.30% and 2.67% respectively. The results of standard addition method show that for the tap water, the recoveries of iron and manganese are in the ranges of 98.0%-104.3% and 96.5%-104.5%, and the RSD is in the range of 0.23%-0.98%; for the Yellow River water (Lijin district of Shandong Province), the recoveries of iron and manganese are in the ranges of 96.0%-101.0% and 98.7%-104.2%, and the RSD is in the range of 0.13%-2.52%; for the seawater in Qingdao offshore, the recoveries of iron and manganese are in the ranges of 95.3%-104.8% and 95.3%-104.7%, and the RSD is in the range of 0.14%-2.66%. It is found that 21 common cations and anions do not interfere with the determination of iron and manganese under the optimum experimental conditions. This method exhibits good reproducibility and high accuracy in the determination of iron and manganese and can be used for the simultaneous determination of iron and manganese in tap water and natural water. By using the established ANN- catalytic spectrophotometric method, the iron and manganese concentrations of the surface seawater at 11 sites in Qingdao offshore are determined and the level distribution maps of iron and manganese are drawn.展开更多
Satellite-to-Satellite tricking (SST) data can be used to determine the orbits of spacecraft in two ways. One is combined orbit determination, which combines SST data with ground-based tracking data and exploits the ...Satellite-to-Satellite tricking (SST) data can be used to determine the orbits of spacecraft in two ways. One is combined orbit determination, which combines SST data with ground-based tracking data and exploits the enhanced tracking geometry. The other is the autonomous orbit determination, which uses only SST. The latter only fits some particular circumstances since it suffers the rank defect problem in other circumstances. The proof of this statement is presented. The nature of the problem is also investigated in order to find an effective solution. Several. methods of solution are discussed. The feasibility of the methods is demonstrated by their application to a simulation.展开更多
To determine the concentrations of total oils,petroleum hydrocarbons,and animal and vegetable oils in water,the conventional analytical methods involve two scans as well as a step of magnesium silicate adsorption to r...To determine the concentrations of total oils,petroleum hydrocarbons,and animal and vegetable oils in water,the conventional analytical methods involve two scans as well as a step of magnesium silicate adsorption to remove the animal and vegetable oils in water samples.In this study,a novel analytical method was developed to determine the above oils in wastewater samples through just one scan—the concentration of animal and vegetable oils,and that of total oils were determined by measuring the absorbance of the 〉C=O bond in the peak area between 1750 cm and 1735 cm^（-1）,and of the C-H bond at 2930 cm^（-1）,2960 cm,and 3030 cm^（-1）,respectively.The concentration of petroleum hydrocarbons was then calculated by subtracting the concentration of animal and vegetable oils from that of total oils.Compared with the well-known analytical method GB/T 16488-1996,the novel approach displayed similar accuracy in the quantitative determination of oils in wastewater samples,but significantly reduced material cost and operation time.展开更多
Background： Grain legumes represent a valuable energy source in pig diets due to their high starch content. The present study was conducted to determine the content and apparent ileal digestibility（AID） of starch i...Background： Grain legumes represent a valuable energy source in pig diets due to their high starch content. The present study was conducted to determine the content and apparent ileal digestibility（AID） of starch in different grain legume cultivars for pigs by means of both a polarimetric and enzymatic method for starch determination.Methods： Three experiments were conducted with six barrows each which were fitted with ileal T-cannulas. In total, 18 diets including six different cultivars of faba beans（Vicia faba L.） and peas（Pisum sativum L.）, five different cultivars of lupins（Lupinus luteus L., Lupinus angustifolius L.）, and one diet with a soybean meal（SBM） were fed.Results： The starch content of faba beans and peas was greater（P ＆lt; 0.05） when determined polarimetrically than enzymatically（438 vs. 345 g/kg dry matter（DM） in faba beans and 509 vs. 390 g/kg DM in peas, respectively）.Considerable lower starch contents were obtained in lupins and SBM, with 82 and 48 g/kg DM（analyzed polarimetrically） and ＆lt;1.1 and 3 g/kg DM（analyzed enzymatically）, respectively. Mean values for contents of neutral detergent fiber（NDF） and acid detergent fiber（ADF） in grain legumes ranged from 111 and 79 g/kg DM in peas to248 and 207 g/kg DM in lupins, respectively. Contents of condensed tannins in the colored flowered faba bean cultivars ranged from 2.1 to 7.4 g/kg DM. The AID of starch was greater（P ＆lt; 0.05） in pea than in faba bean cultivars,and using the polarimetric starch determination method resulted in greater（P ＆lt; 0.05） digestibility values than using enzymatic starch analysis（84 vs. 80% in faba beans and 86 vs. 83% in peas）. Moreover, AID of starch differed（P ＆lt; 0.05）within pea cultivars and starch digestibility in faba beans decreased linearly（P ＆lt; 0.05） as the content of condensed tannins increased. However, there was no relationship between contents of NDF and ADF and AID of starch in pea and faba bean cultivars.Conclusion： Both contents and AID of starch in grain legumes can vary as influenced by the analytical method used for starch determination. Generally, starch digestibility is greater when measured by polarimetric rather than enzymatic methods.展开更多
A method for the optimal fiber input power determination is presented by employing the variation characteristics of signal to noise ratio(SNR) in spontaneous Brillouin-scattering-based sensing system. And a heterodyne...A method for the optimal fiber input power determination is presented by employing the variation characteristics of signal to noise ratio(SNR) in spontaneous Brillouin-scattering-based sensing system. And a heterodyne detection system is constructed for measuring the Brillouin scattering spectra with different fiber input powers. The Brillouin spectrum width and system SNR can be simultaneously measured from these spectra, and the optimal fiber input power can be obtained from such information. In the experiment, for 48.8-km-long standard single-mode fiber(SSMF), the optimal fiber input power values are all approximately 0 dBm obtained by the maximum SNR position for different local oscillator power values and average times.展开更多
文摘Cost-effectiveness analysis（CEA） is increasingly important in health care decision making.Cost-effectiveness threshold is a critical parameter in the cost-effectiveness analysis.This review introduces the concept of cost-effectiveness threshold, summarizes its determining methods,and classifies the existing methods into two kinds according to budget constraints,then analyzes the merit and demerit of every methods.When there is a flexible budget,the methods for determining the cost-effectiveness threshold include inferring the threshold from previous decisions,comparison with other health care technology or transfer from elsewhere in the public sector,social willingness-to-pay approach,GDP per capita criteria,and rule of thumb.When there is a fixed budget,the methods for determining the cost-effectiveness threshold include shadow price approach,opportunity cost approach,and ICER threshold-searcher model.Each approach to determining threshold has its strength and weakness.The aim of this article is to introduce the existing methods and discuss the features of each method.The background information,such as the definition of threshold,is also described.The basic theory of cost-effectiveness threshold is elaborated,and we recommend the establishment of a cost-effectiveness threshold in the Chinese health care.
文摘Due to various reasons, the inspection methods often need to be changed, and the detection reagents often need to be replaced. In this study, a comparative experiment was conducted between the ethanol-based and ether-based determination methods for oil content in imported wool. The determination results obtained from the two methods were treated as abscissa and ordinate respectively,and their linear relationship was analyzed. According to the linear regression analysis, the conversion equation of determination result between the two methods was obtained. In addition, the repeatability admissible error and reproducibility admissible error were established through analyzing the comparative experimental results by scientific software. This study will bring new ideas for further researches in this field, and provide reference for solving the similar problems in actual inspection work.
基金the National Key R&D Program of China(No.2016YFC0202900)the National Natural Science Foundation of China(Nos.21567015 and 21407072)+5 种基金the West Light Foundation of The Chinese Academy of Sciences(2019)special fund of State Key Joint Laboratory of Environment Simulation and Pollution Control(No.20K03ESPCP)the Natural Science Foundation of Gansu Province(Nos.18JR3RA079 and 17JR5RA109)the Project of Food and Drug Administration of Gansu Province(No.2018GSFDA014)the Gansu Provincial Party Committee Young Creative Talents(No.Ganzutongzi[2017]121)the Hongliu Science Fund for Distinguished Young Scholars(2018)。
文摘The hydroxyl radical(·OH)has a crucial function in the oxidation and removal of many atmospheric compounds that are harmful to health.Nevertheless,high reactivity,low atmospheric abundance,determination of hydroxyl,and hydroperoxyl radical’s quantity is very difficult.In the atmosphere and troposphere,hydroperoxyl radicals(HO_(2))are closely demanded in the chemical oxidation of the troposphere.But advances in technology have allowed researchers to improve the determination methods on the research of free radicals through some spectroscopic techniques.So far,several methods such as laser-induced fluorescence(LIF),high-performance liquid chromatography(HPLC),and chemical ionization mass spectroscopy have been identified and mostly used in determining the quantity of hydroxyl and hydroperoxyl radicals.In this systematic review,we have advised the use of scavenger as an advance for further researchers to circumvent some of these problems caused by free radicals.The primary goal of this review is to deepen our understanding of the functions of the most critical free radical(·OH,HO_(2))and also understand the currently used methods to quantify them in the atmosphere and troposphere.
文摘Degradation rate of feed proteins in rumen is a basic indicator of new intestinal protein system of ruminants. In this paper, determination methods of degradation rate in tureen including in-vivo method, nylon bag method and artificial rumen method are compared in order to provide a reference for animal nutrition.
文摘A method to determine the design value of the extreme wave height is introduced in this paper. The method is, based on the theoretical distribution of wave heights or the experiential probability distribution of wave heights, to calculate the mode of the extreme wave height and the design value with good assuredness. In fitting the experiential distribution of the observed wave heights, the paper adopts the simulating function of F(x) = 1 - exp[ ?axb exp( -cxd )] and the non-linear parameter in the function is determined by the Non-Linear Least Square Method. The practical application of the method has proved that it is not only simple and convenient, but also very effective in engineering design practice.
基金Supported by the National Natural Science Foundation of China under Grant No 11172042
文摘The time-dependent Jones Wilkins-Lee equation products for aluminized explosives. To obtain the of state （JWL-EOS） is applied to describe detonation state time-dependent JWL-EOS parameters, cylinder tests and underwater explosion experiments are performed. According to the result of the wall radial velocity in cylinder tests and the shock wave pressures in underwater explosion experiments, the time-dependent JWL-EOS parameters are determined by iterating these variables in AUTODYN hydroeode simulations until the experimental values are reproduced. In addition, to verify the reliability of the derived JWL-EOS parameters, the aluminized explosive experiment is conducted in concrete. The shock wave pressures in the affected concrete bodies are measured by using manganin pressure sensors, and the rod velocity is obtained by using a high-speed camera. Simultaneously, the shock wave pressure and the rod velocity are calculated by using the derived time-dependent JWL equation of state. The calculated results are in good agreement with the experimental data.
文摘The acute toxic effects of ammonium sulphate to fresh-water catfish, Heteropneustes fossilis (H.fossilis) have been studied by determining LC50 values with 95% confidence limits, by the graphic method, the logistic method, the Spearman and Karber method and the trimmed Spearman-Karber method. The trimmed Spearman-Karber method was found the most ideal for ammonium salt toxicity test. The flaws in the trimmed Spearman-Karber method are also discussed.
文摘A single three point bend specimen compliance method for determining JIC of high strength high fracture toughness steels is presented and a formula for calculatinff J-integral is proposed as follows.It is simple and valid for high strength high fracture toughness steels. The values of JIC and KIC measured by this method are in good agreement with those measured by standard test method.
文摘In human subjects,morphine is extensively metabolized to form(M3G)and morphine-6-glucuronide(M6G).This article established a sensitive LC-MS/MS method that allows the quantification of morphine and its glucuronide metabolites.
基金Project(2016YFC0802203)supported by the National Key R&D Program of ChinaProject(2013G001-A-2)supported by the Science and Technology Research and Development Program of China Railway CorporationProject(SKLGDUEK2011)supported by the State Key Laboratory for GeoMechanics and Deep Underground Engineering,China University of Mining&Technology。
文摘Based on the field destructive test of six rock-socketed piles with shallow overburden,three prediction models are used to quantitatively analyze and predict the intact load−displacement curve.The predicted values of ultimate uplift capacity were further determined by four methods(displacement controlling method(DCM),reduction coefficient method(RCM),maximum curvature method(MCM),and critical stiffness method(CSM))and compared with the measured value.Through the analysis of the relationship between the change rate of pullout stiffness and displacement,a method used to determine the ultimate uplift capacity via non-intact load−displacement curve was proposed.The results show that the predicted value determined by DCM is more conservative,while the predicted value determined by MCM is larger than the measured value.This suggests that RCM and CSM in engineering applications can be preferentially applied.Moreover,the development law of the change rate of pullout stiffness with displacement agrees well with the attenuation form of power function.The theoretical predicted results of ultimate uplift capacity based on the change rate of pullout stiffness will not be affected by the integrity of the curve.The method is simple and applicable for the piles that are not loaded to failure state,and thus provides new insights into ultimate uplift capacity determination of test piles.
基金the National Natural Science Foundation of China(51774119,51374095,and 51604092)the primary research projects of critical scientific research in Henan Colleges and Universities(19zx003)+1 种基金Program for Innovative Research Team in University of Ministry of Education of China(IRT_16R22)State Key Laboratory Cultivation Base for Gas Geology and Gas Control(Henan Polytechnic University)(WS2018A02)。
文摘Coal seam gas content is frequently measured in quantity during underground coal mining operation and coalbed methane(CBM)exploration as a significant basic parameter.Due to the calculation error of lost gas and residual gas in the direct method,the efficiency and accuracy of the current methods are not inadequate to the large area multi-point measurement of coal seam gas content.This paper firstly deduces a simplified theoretical dynamic model for calculating lost gas based on gas dynamic diffusion theory.Secondly,the effects of various factors on gas dynamic diffusion from coal particle are experimentally studied.And sampling procedure of representative coal particle is improved.Thirdly,a new estimation method of residual gas content based on excess adsorption and competitive adsorption theory is proposed.The results showed that the maximum error of calculating the losing gas content by using the new simplified model is only 4%.Considering the influence of particle size on gas diffusion law,the particle size of the collected coal sample is below 0.25 mm,which improves the measurement speed and reflects the safety representativeness of the sample.The determination time of gas content reduced from 36 to 3 h/piece.Moreover,the absolute error is 0.15–0.50 m^3/t,and the relative error is within 5%.A new engineering method for determining the coal seam gas content is developed according to the above research.
文摘The law of mathematical statistics, which the coal vitrinite reflectance index obeys, the existing vitrinite representing deviations, and the advantages of judging coalification and the shortage of judging coal type were analyzed. The advantages and disadvantages of various determination methods and the expression index and different methods of identifying vitrinite on the determination results were compared. The vitality of coal vitrinite reflectance depends on its full play the unique function of reflectance histogram and the systematic errors between different determination methods do not affect the application based on reflectance histogram are considered.
文摘A method for rapid determination of silicon content in rice was introduced. The reliability of this method was verified by using a recombinant inbred line （RIL） population of rice cross Zhenshan 97B / Milyang 46. Two hundred and forty-nine RILs were transplanted in two replications. Simple correlation coefficients on the silicon content in the hull, flag leaf and stern in rice between duplicate samples of 498 rice materials were 0.97954, 0.97026 and 0.98848, respectively. Ten representative samples were selected for measurement using the high-temperature alkaline fusion method. Simple correlation coefficient between the silicon contents determined by the high-temperature alkaline fusion method and by the present method is 0.9993.
基金supported from the National Natural Science Foundation of China(Nos.42020104001 and 41805103)Local Innovative and Research Team Project of Guangdong Pearl River Talents Program(No.2017BT01Z032)the Fund from Chemistry and Chemical Engineering Guangdong Laboratory(No.1922009)
文摘As more attention is being paid to the characteristics of atmospheric amines,there is also an increasing demand for reliable detection technologies.Herein,a method was developed for simultaneous detection of atmospheric amines in both gaseous and particulate phases using gas chromatography-mass spectrometry(GC-MS).The amine samples were collected with and without phosphoric acid filters,followed by derivatization with benzenesulfonyl chloride under alkaline condition prior to GC-MS analysis.Furthermore,the method was optimized and validated for determining 14 standard amines.The detection limits ranged from0.0408-0.421μg/mL(for gaseous samples)and 0.163-1.69μg/mL(for particulate samples),respectively.The obtained recoveries ranged from 68.8%-180%and the relative standard deviation was less than 30%,indicating high precision and good reliability of the method.Seven amines were simultaneously detected in gaseous and particulate samples in an industrial park using the developed method successfully.Methylamine,dimethylamine and diethylamine together accounted for 76.7%and 75.6%of particulate and gaseous samples,respectively.By comparing the measured and predicted values of gas-particle partition fractions,it was found that absorption process of aqueous phase played a more important role in the gas-partition of amines than physical adsorption.Moreover,the reaction between unprotonated amines and acid(aq.)in water phase likely promoted water absorption.Higher measured partition fraction of dibutylamine was likely due to the reaction with gaseous HCl.The developed method would help provide a deeper understanding of gas-particle partitioning as well as atmospheric evolution of amines.
文摘A new analytical method using Back-Propagation (BP) artificial neural network and kinetic spectrophotometry for simultaneous determination of iron and magnesium in tap water, the Yellow River water and seawater is established. By conditional experiments, the optimum analytical conditions and parameters are obtained. Levenberg-Marquart (L-M) algorithm is used for calculation in BP neural network. The topological structure of three-layer BP ANN network architecture is chosen as 15-16-2 (nodes). The initial value of gradient coefficient μ is fixed at 0.001 and the increase factor and reduction factor of μ take the default values of the system. The data are processed by computers with our own programs written in MATLAB 7.0. The relative standard deviation of the calculated results for iron and manganese is 2.30% and 2.67% respectively. The results of standard addition method show that for the tap water, the recoveries of iron and manganese are in the ranges of 98.0%-104.3% and 96.5%-104.5%, and the RSD is in the range of 0.23%-0.98%; for the Yellow River water (Lijin district of Shandong Province), the recoveries of iron and manganese are in the ranges of 96.0%-101.0% and 98.7%-104.2%, and the RSD is in the range of 0.13%-2.52%; for the seawater in Qingdao offshore, the recoveries of iron and manganese are in the ranges of 95.3%-104.8% and 95.3%-104.7%, and the RSD is in the range of 0.14%-2.66%. It is found that 21 common cations and anions do not interfere with the determination of iron and manganese under the optimum experimental conditions. This method exhibits good reproducibility and high accuracy in the determination of iron and manganese and can be used for the simultaneous determination of iron and manganese in tap water and natural water. By using the established ANN- catalytic spectrophotometric method, the iron and manganese concentrations of the surface seawater at 11 sites in Qingdao offshore are determined and the level distribution maps of iron and manganese are drawn.
文摘Satellite-to-Satellite tricking (SST) data can be used to determine the orbits of spacecraft in two ways. One is combined orbit determination, which combines SST data with ground-based tracking data and exploits the enhanced tracking geometry. The other is the autonomous orbit determination, which uses only SST. The latter only fits some particular circumstances since it suffers the rank defect problem in other circumstances. The proof of this statement is presented. The nature of the problem is also investigated in order to find an effective solution. Several. methods of solution are discussed. The feasibility of the methods is demonstrated by their application to a simulation.
基金supported by the National Program of Drawing and Revising of Environmental Protection Standards (No.997.3)the State Key Program of National Natural Science(No.50938004)+3 种基金the National Natural Science Foundation for Distinguished Young Scientists(No.50825802)Jiangsu Nature Science Foundation(No. BK2010006)the Resources Key Subject of National High Technology Research & Development Project (863 ProjectNos.2009AA06Z315 and SQ2009AA06XK1482331)from China
文摘To determine the concentrations of total oils,petroleum hydrocarbons,and animal and vegetable oils in water,the conventional analytical methods involve two scans as well as a step of magnesium silicate adsorption to remove the animal and vegetable oils in water samples.In this study,a novel analytical method was developed to determine the above oils in wastewater samples through just one scan—the concentration of animal and vegetable oils,and that of total oils were determined by measuring the absorbance of the 〉C=O bond in the peak area between 1750 cm and 1735 cm^（-1）,and of the C-H bond at 2930 cm^（-1）,2960 cm,and 3030 cm^（-1）,respectively.The concentration of petroleum hydrocarbons was then calculated by subtracting the concentration of animal and vegetable oils from that of total oils.Compared with the well-known analytical method GB/T 16488-1996,the novel approach displayed similar accuracy in the quantitative determination of oils in wastewater samples,but significantly reduced material cost and operation time.
基金supported by the H.W.Schaumann Stiftung(Hamburg,Germany)
文摘Background： Grain legumes represent a valuable energy source in pig diets due to their high starch content. The present study was conducted to determine the content and apparent ileal digestibility（AID） of starch in different grain legume cultivars for pigs by means of both a polarimetric and enzymatic method for starch determination.Methods： Three experiments were conducted with six barrows each which were fitted with ileal T-cannulas. In total, 18 diets including six different cultivars of faba beans（Vicia faba L.） and peas（Pisum sativum L.）, five different cultivars of lupins（Lupinus luteus L., Lupinus angustifolius L.）, and one diet with a soybean meal（SBM） were fed.Results： The starch content of faba beans and peas was greater（P ＆lt; 0.05） when determined polarimetrically than enzymatically（438 vs. 345 g/kg dry matter（DM） in faba beans and 509 vs. 390 g/kg DM in peas, respectively）.Considerable lower starch contents were obtained in lupins and SBM, with 82 and 48 g/kg DM（analyzed polarimetrically） and ＆lt;1.1 and 3 g/kg DM（analyzed enzymatically）, respectively. Mean values for contents of neutral detergent fiber（NDF） and acid detergent fiber（ADF） in grain legumes ranged from 111 and 79 g/kg DM in peas to248 and 207 g/kg DM in lupins, respectively. Contents of condensed tannins in the colored flowered faba bean cultivars ranged from 2.1 to 7.4 g/kg DM. The AID of starch was greater（P ＆lt; 0.05） in pea than in faba bean cultivars,and using the polarimetric starch determination method resulted in greater（P ＆lt; 0.05） digestibility values than using enzymatic starch analysis（84 vs. 80% in faba beans and 86 vs. 83% in peas）. Moreover, AID of starch differed（P ＆lt; 0.05）within pea cultivars and starch digestibility in faba beans decreased linearly（P ＆lt; 0.05） as the content of condensed tannins increased. However, there was no relationship between contents of NDF and ADF and AID of starch in pea and faba bean cultivars.Conclusion： Both contents and AID of starch in grain legumes can vary as influenced by the analytical method used for starch determination. Generally, starch digestibility is greater when measured by polarimetric rather than enzymatic methods.
基金supported by the National Natural Science Foundation of China(No.61377088)the Natural Science Foundation of Hebei Province of China(Nos.E2015502053 and F2014502098)
文摘A method for the optimal fiber input power determination is presented by employing the variation characteristics of signal to noise ratio(SNR) in spontaneous Brillouin-scattering-based sensing system. And a heterodyne detection system is constructed for measuring the Brillouin scattering spectra with different fiber input powers. The Brillouin spectrum width and system SNR can be simultaneously measured from these spectra, and the optimal fiber input power can be obtained from such information. In the experiment, for 48.8-km-long standard single-mode fiber(SSMF), the optimal fiber input power values are all approximately 0 dBm obtained by the maximum SNR position for different local oscillator power values and average times.
