As part of efforts to reduce anthropogenic CO_(2) emissions by the steelmaking industry,this study investigated the direct reduction of industrially produced hematite pellets with H_(2) using the Doehlert experimental...As part of efforts to reduce anthropogenic CO_(2) emissions by the steelmaking industry,this study investigated the direct reduction of industrially produced hematite pellets with H_(2) using the Doehlert experimental design to evaluate the effect of pellet diameter(10.5-16.5 mm),porosity(0.36-0.44),and temperature(600-1200℃).A strong interactive effect between temperature and pellet size was observed,indicating that these variables cannot be considered independently.The increase in temperature and decrease in pellet size considerably favor the reduction rate,while porosity did not show a relevant effect.The change in pellet size during the reduction was negligible,except at elevated temperatures due to crack formation.A considerable decrease in mechanical strength at high temperatures suggests a maximum process operating temperature of 900℃.Good predictive capacity was achieved using the modified grain model to simulate the three consecutive non-catalytic gas-solid reactions,considering different pellet sizes and porosities,changes during the reaction from 800 to 900℃.However,for other temperatures,different mechanisms of structural modifications must be considered in the modeling.These results represent significant contributions to the development of ore pellets for CO_(2)-free steelmaking technology.展开更多
A spice formulation study in Burkina Faso was carried out using local ingredients for the benefit of households. The objective of this study was to propose some spice formulations based on local ingredients in order t...A spice formulation study in Burkina Faso was carried out using local ingredients for the benefit of households. The objective of this study was to propose some spice formulations based on local ingredients in order to reduce the use of chemical spices in the preparation of different dishes. The Design of Experiments (DOE) methodology was used for the formulation of the spices and their physicochemical, nutritional and sensory characteristics were evaluated by standardized and standard methods. The results obtained showed lipid contents (g/100 g DM) ranging from 10.41 ± 0.26 to 15.64 ± 0.68, total sugars from 4.39 ± 0.32 to 5.46 ± 0.31, protein from 3.65 ± 0.17 to 12.04 ± 0.35 and ash from 5.83 ± 0.01 to 7.02 ± 0.01. The polyphenol content ranged from 9.09 ± 1.60 to 11.33 ± 0.90, and the flavonoid content ranged from 0.65 ± 0.03 to 1.08 ± 0.13. The sensory analysis carried out showed that the spices have generally satisfactory organoleptic characteristics. These results constitute new information in the diet of populations and are an alternative to the chemical spices used in their cooking.展开更多
Lattice structures are three-dimensional structures composed of repeated geometrical shapes with multiple interconnected nodes,providing high strength-to-weight ratios,customizable properties,and efficient use of mate...Lattice structures are three-dimensional structures composed of repeated geometrical shapes with multiple interconnected nodes,providing high strength-to-weight ratios,customizable properties,and efficient use of materials.A smart use of materials leads to reduced fuel consumption and lower operating costs,making them highly desirable for aircraft manufacturers.Furthermore,the customizable properties of lattice structures allow for tailoring to specific design requirements,leading to improved performance and safety for aircraft.These advantages make lattice structures an important focus for research and development in the aviation industry.This paper presents an experimental evaluation of the mechanical compression properties of lattice trusses made with Ti6Al4V,designed for use in an anti-ice system.The truss structures were manufactured using additive manufacturing techniques and tested under compressive loads to determine mechanical properties.Results showed that lattice trusses exhibited high levels of compressive strength,making them suitable for use in applications where mechanical resistance and durability are critical,such as in anti-ice systems.We also highlight the potential of additive manufacturing techniques for the fabrication of lattice trusses with tailored mechanical properties.The study provides valuable insights into the mechanical behavior of Ti6Al4V lattice trusses and their potential applications in anti-ice systems,as well as other areas where high strength-to-weight ratios are required.The results of this research contribute to the development of lightweight,efficient,and durable anti-ice systems for use in aviation and other industries.展开更多
When the amphibious vehicle navigates in water,the angle of the anti-wave plate and the position of the center of gravity greatly influence the navigation characteristics.In the relevant research on reducing the navig...When the amphibious vehicle navigates in water,the angle of the anti-wave plate and the position of the center of gravity greatly influence the navigation characteristics.In the relevant research on reducing the navigation resistance of amphibious vehicles by adjusting the angle of the anti-wave plate,there is a lack of scientific selection of parameters and reasonable research of simulation results by using mathematical methods,and the influence of the center of gravity position on navigation characteristics is not considered at the same time.To study the influence of the combinations of the angle of the anti-wave plate and the position of the center of gravity on the resistance reduction characteristics,a numerical calculation model of the amphibious unmanned vehicle was established by using the theory of computational fluid dynamics,and the experimental data verified the correctness of the numerical model.Based on this numerical model,the navigation characteristics of the amphibious unmanned vehicle were studied when the center of gravity was located at different positions,and the orthogonal experimental design method was used to optimize the parameters of the angle of the anti-wave plate and the position of the center of gravity.The results show that through the parameter optimization analysis based on the orthogonal experimental method,the combination of the optimal angle of the anti-wave plate and the position of the center of gravity is obtained.And the numerical simulation result of resistance is consistent with the predicted optimal solution.Compared with the maximum navigational resistance,the parameter optimization reduces the navigational resistance of the amphibious unmanned vehicle by 24%.展开更多
The order-of-addition experiments are widely used in many fields,including food and industrial production,but the relative research under prior constraints is limited.The purpose of this paper is to select an optimal ...The order-of-addition experiments are widely used in many fields,including food and industrial production,but the relative research under prior constraints is limited.The purpose of this paper is to select an optimal sequence under the restriction that component i is added before component j,while it is unachievable to compare all sequences when the number of components m is large.To achieve this,a constrained PWO model is first provided,and then the D-optimal designs for order-of addition experiments with minimal-points via the modified threshold accepting algorithm is established.The effectiveness of the proposed method is demonstrated through a job scheduling problem with a prior constraint for teaching cases.展开更多
Background: We currently have international and national guidelines regarding the assessment and monitoring of clinical signs and humane endpoints in animals used in teaching and research, which make the performance o...Background: We currently have international and national guidelines regarding the assessment and monitoring of clinical signs and humane endpoints in animals used in teaching and research, which make the performance of these activities mandatory for any experiment and professional working in this area. Assigning the severity of a research experiment is the result of an analysis of records of observations of the animal’s behavior, and clinical signs. The aim of this study was to describe the importance of carrying out a severity assessment associated with clinical and behavioral monitoring of rodents and rabbits during experimentation to maintain the welfare of these animals undergoing scientific research. Methods: The literature search was carried out using the following terms: “Monitoring”;“Humane endpoints”;“Animal welfare”, “Rodents”;“Rabbits”, and as connectors “and”;“or”, in the following databases: PubMed;LILACS/BIREME and SciELO. Results: A total of 987 articles were identified in the databases, and 20 of these studies were included in this review. Conclusions: Humane endpoint protocols and procedure severity tables are of the utmost importance, both from an ethical point and to refine the results of research conducted on laboratory animals. They should be drawn up jointly by the teams responsible for the project and the maintenance of the animals during the research period, and the data obtained should be published so that the scientific community can have access to it, helping to disseminate these practices, as well as helping to draw up new procedures. Monitoring and evaluating the welfare and clinical condition of animals undergoing scientific research procedures is the responsibility of the professors, researchers, veterinarians, and animal facility coordinators. The Ethics Committee on the Use of Animals must monitor all the activities conducted with the animals, by inspecting the experimental procedures and the physical environment of the laboratory animal facility where the animals are housed.展开更多
Soil-water characteristic curve (SWCC) is significant to estimate the site-specific unsaturated soil properties (such as unsaturated shear strength and coefficient of permeability) for geotechnical analyses involving ...Soil-water characteristic curve (SWCC) is significant to estimate the site-specific unsaturated soil properties (such as unsaturated shear strength and coefficient of permeability) for geotechnical analyses involving unsaturated soils. Determining SWCC can be achieved by fitting data points obtained according to the prescribed experimental scheme, which is specified by the number of measuring points and their corresponding values of the control variable. The number of measuring points is limited since direct measurement of SWCC is often costly and time-consuming. Based on the limited number of measuring points, the estimated SWCC is unavoidably associated with uncertainties, which depends on measurement data obtained from the prescribed experimental scheme. Therefore, it is essential to plan the experimental scheme so as to reduce the uncertainty in the estimated SWCC. This study presented a Bayesian approach, called OBEDO, for probabilistic experimental design optimization of measuring SWCC based on the prior knowledge and information of testing apparatus. The uncertainty in estimated SWCC is quantified and the optimal experimental scheme with the maximum expected utility is determined by Subset Simulation optimization (SSO) in candidate experimental scheme space. The proposed approach is illustrated using an experimental design example given prior knowledge and the information of testing apparatus and is verified based on a set of real loess SWCC data, which were used to generate random experimental schemes to mimic the arbitrary arrangement of measuring points during SWCC testing in practice. Results show that the arbitrary arrangement of measuring points of SWCC testing is hardly superior to the optimal scheme obtained from OBEDO in terms of the expected utility. The proposed OBEDO approach provides a rational tool to optimize the arrangement of measuring points of SWCC test so as to obtain SWCC measurement data with relatively high expected utility for uncertainty reduction.展开更多
Mixed-variable problems are inevitable in engineering. However, few researches pay attention to discrete variables. This paper proposed a mixed-variable experimental design method (ODCD): first, the design variables w...Mixed-variable problems are inevitable in engineering. However, few researches pay attention to discrete variables. This paper proposed a mixed-variable experimental design method (ODCD): first, the design variables were divided into discrete variables and continuous variables;then, the DVD method was employed for handling discrete variables, the LHD method was applied for continuous variables, and finally, a Columnwise-Pairwise Algorithm was used for the overall optimization of the design matrix. Experimental results demonstrated that the ODCD method outperforms in terms of the sample space coverage performance.展开更多
In this paper,we introduce the design principle of the oscillating excited spray cooling experimental device.We then designed an oscillating excited spray cooling experimental device.By using the device,the swaying mo...In this paper,we introduce the design principle of the oscillating excited spray cooling experimental device.We then designed an oscillating excited spray cooling experimental device.By using the device,the swaying motion can be realized through the control system,and the motion of the droplet under different vibration frequencies can be observed.By measuring the liquid flow rate and pressure,the changes in liquid flow rate,pressure,and temperature with time under different vibration frequencies were studied.The trajectory of the droplet and the temperature distribution of the droplet under different vibration frequencies could be observed.The device has a simple structure,is easy to control,and can achieve continuous observation of the spray cooling process.展开更多
Paper and pulp mills generate substantial volumes of wastewater containing lignin-derived compounds that are challenging to degrade using conventional wastewater treatment methods.This study presents a novel biofilm-b...Paper and pulp mills generate substantial volumes of wastewater containing lignin-derived compounds that are challenging to degrade using conventional wastewater treatment methods.This study presents a novel biofilm-based process for enhanced lignin removal in wastewater using the fungus Neurospora discreta,which effectively degrades lignin and forms robust biofilms at the air–liquid interface under specific conditions.The process was optimised using the Taguchi design of experiments approach,and three factors including pH,copper sulphate concentration,and trace element concentration were evaluated at three levels.Experimental data were analysed against three responses:lignin degradation efficiency and the activities of two ligninolytic enzymes(polyphenol oxidase and versatile peroxidase).The results indicated that wastewater pH was the most significant parameter affecting lignin degradation efficiency and enzyme activities.Over 70%lignin degradation was achieved at pH levels of 5 and 6 with copper sulphate concentrations above 4 mg/L,while degradation efficiency drastically dropped to 45%at a pH value of 7.Reversed-phase high-performance liquid chromatography analysis demonstrated the effects of the three factors on the polar and non-polar components of lignin in wastewater,revealing a clear decrease in all peak areas after treatment.Additionally,significant relationships were observed between biofilm properties(including porosity,water retention value,polysaccharide content,and protein content)and lignin removal efficiency.This study also reported for the first time the presence of versatile peroxidase,a ligninolytic enzyme,in Neurospora sp.展开更多
Food production demand is constantly growing,entailing a proportional increment in fertilisers and pharmaceuticals use,which are eventually introduced to the environment,leading,among others,to an imbalance in the nit...Food production demand is constantly growing,entailing a proportional increment in fertilisers and pharmaceuticals use,which are eventually introduced to the environment,leading,among others,to an imbalance in the nitrogen cycle.Electrochemical nitrate reduction reaction is a delocalised route for nitrates elimination and green ammonia production.In the present study,we carry out nitrates electroreduction over a commercial MoS_(2)catalyst,focusing on optimising selected input factors affecting the reaction.Concretely,Doehlert design of experiment and response surface methodology are employed to find the proper combination of supporting salt concentration in the electrolyte,applied potential,and catalyst loading at the working electrode,with the overall aim to boost Faradaic efficiency(FE)and ammonia production.As a matter of fact,varying these input factors,the obtained FE values ranged from∼2%to∼80%,highlighting the strength of the newly conceived approach.Moreover,our multivariate strategy allows the quantification of each factor effect and elucidates hidden interactions between them.Finally,successful extended durability tests are performed for 100 h at both FE and productivity(P)optimal conditions.In parallel,cell electrodes are characterised by in-depth structural,morphological,and surface techniques,before and after ageing,overall demonstrating the outstanding stability of the proposed electrochemical reactor.展开更多
During the process of organizing our original data,we unfortunately identified two error in the figures within our published article.In Fig.1,the online version incorrectly labels the SNI+NAC group as the sham+NAC gro...During the process of organizing our original data,we unfortunately identified two error in the figures within our published article.In Fig.1,the online version incorrectly labels the SNI+NAC group as the sham+NAC group.We have revised the grouping annotations in Fig.1 and have labeled the DHE staining in the figure to present the experimental design more clearly.展开更多
How exhibitions of revolutionary cultural relics affect and enhance the audience’s comprehensive experiences was discussed from aspects of bodily perception,spatial interaction,emotional resonance,and value identific...How exhibitions of revolutionary cultural relics affect and enhance the audience’s comprehensive experiences was discussed from aspects of bodily perception,spatial interaction,emotional resonance,and value identification,and the experience design of exhibitions of revolutionary cultural relics was further studied to better carry and convey the spirit of the revolution.Guided by embodied theory,this study was provided with methodological support from various perspectives,and analyzed the current development and existing problems of exhibitions of revolutionary cultural relics through field investigations.Currently,embodied theory is gradually being applied in exhibition design,and the focus of exhibitions is shifted from“objects”to“people”.By collecting direct feelings and feedback from the audience on the exhibitions of revolutionary cultural relics,and theoretical construction and practical application for the experience design of these exhibitions are solidly supported.The needs for emotional and inspirational awakening,education and learning,participation and interaction were revealed.Based on the audience’s behavior,a four-step design method was proposed:enhancing the sense of place,enriching sensory experience,strengthening interactive experiences,and fostering a sense of belonging.Through the application of experiential design in these four dimensions,it aims to reshape the methods of exhibitions of revolutionary cultural relics and promote a deep integration between the exhibitions and embodied theory.展开更多
This study examines the efficacy of Avicennia marina(AM)leaves as an environmentally sustainable biosorbent for the extraction of methylene blue(MB)dye from wastewater.A hybrid approach of Response Surface Methodology...This study examines the efficacy of Avicennia marina(AM)leaves as an environmentally sustainable biosorbent for the extraction of methylene blue(MB)dye from wastewater.A hybrid approach of Response Surface Methodology(RSM)and Artificial Neural Networks(ANN)was implemented to assess,optimize,and forecast biosorption effectiveness across different operating parameters.The experimental design employed a Central Composite Design(CCD)methodology,focusing on critical parameters including pH,initial dye concentration,temperature,and biosorbent dosage.The ideal biosorption parameters were identified as a temperature of 44.3℃,pH 7.1,a biosorbent dosage of 0.3 grams,and an initial dye concentration of 48.4 mg/L,resulting in a maximum removal efficiency of 84.26%.The ANN model exhibited significant prediction accuracy,so confirming its appropriateness for predicting and enhancing intricate biosorption processes.The findings underscore that AM leaves constitute a cost-efficient,plentiful,and ecologically sustainable resource for wastewater treatment purposes.Furthermore,the amalgamation of RSM and ANN shown significant efficacy in process optimization and forecasting.These findings provide significant insights into the advancement of eco-friendly solutions for the treatment of dye-contaminated water.Subsequent study must prioritize the amplification of the procedure for industrial applications,the execution of ongoing system assessments,and the evaluation of the enduring environmental and economic ramifications of utilizing AM leaves as a biosorbent.展开更多
Cavitation is one of the most important performance of centrifugal pumps. However, the current optimization works of centrifugal pump are mostly focusing on hydraulic efficiency only, which may result in poor cavitati...Cavitation is one of the most important performance of centrifugal pumps. However, the current optimization works of centrifugal pump are mostly focusing on hydraulic efficiency only, which may result in poor cavitation performance. Therefore, it is necessary to find an appropriate solution to improve cavitation performance with acceptable efficiency. In this paper, to improve the cavitation performance of a centrifugal pump with a vaned diffuser, the influence of impeller geometric parameters on the cavitation of the pump is investigated using the orthogonal design of experiment （DOE） based on computational fluid dynamics. The impeller inlet diameter D1, inlet incidence angle Aft, and blade wrap angle ~0 are selected as the main impeller geometric parameters and the orthogonal experiment of L9（3＂3） is performed. Three-dimensional steady simulations for cavitation are conducted by using constant gas mass fraction model with second-order upwind, and the predicated cavitation performance is validated by laboratory experiment. The optimization results are obtained by the range analysis method to improve cavitation performance without obvious decreasing the efficiency of the centrifugal pump. The internal flow of the pump is analyzed in order to identify the flow behavior that can affect cavitation performance. The results show that D1 has the greatest influence on the pump cavitation and the final optimized impeller provides better flow distribution at blade leading edge. The final optimized impeller accomplishes better cavitation and hydraulic performance and the NPSHR decreases by 0.63m compared with the original one. The presented work supplies a feasible route in engineering practice to optimize a centrifugal pump impeller for better cavitation performance.展开更多
Security monitoring system of coal mines is indispensable to ensure the safe and efficient production of colliery. Due to the special and narrow underground field of the coal mine, the electromagnetic interference can...Security monitoring system of coal mines is indispensable to ensure the safe and efficient production of colliery. Due to the special and narrow underground field of the coal mine, the electromagnetic interference can cause a series of misstatements and false positives on the monitoring system, which will severely hamper the safe production of coal industry. In this paper, first, the frequency characteristics of the interference source on the power line are extracted when equipment runs normally. Then the finite difference time domain method is introduced to analyze the effects of the electromagnetic interference parameters on the security monitoring signal line. And the interference voltage of the two terminal sides on the single line is taken as evaluating indexes. Finally, the electromagnetic interference parameters are optimized by orthogonal experimental design based on the MATLAB simulation on the normal operation of equipment.展开更多
Four process parameters, pad diameter, stencil thickness, ball diameter and stand-off were chosen as four control factors. By using an L25 （5^6 ） orthogonal array the ceramic ball grid array （ CBGA ） solder joints...Four process parameters, pad diameter, stencil thickness, ball diameter and stand-off were chosen as four control factors. By using an L25 （5^6 ） orthogonal array the ceramic ball grid array （ CBGA ） solder joints which have 25 different combinations of process parameters were designed. The numerical models of all the 25 CBGA solder joints were developed using the Sugrace Evolver. Utilizing the sugrace coordinate exported from the 25 CBGA solder joints numerical models, the finite element analysis models were set up and the nonlinear finite element analysis of the CBGA solder joints under thermal cycles were pegrormed by ANSYS. The thermal fatigue life of CBGA solder joint was calculated using Coffin-Manson equation. Based on the calculated thermal fatigue life results, the range analysis and the variance analysis were pegrormed. The results show that the fatigue life of CBGA solder joint is affected by the pad diameter, the stencil thickness, the ball diameter and the stand-off in a descending order, the best combination of process parameters results in the longest fatigue life is 0.07 mm stand-off, 0.125 mm stencil thickness of, 0.85 mm ball diameter and 0. 89 mm pad diameter. With 95% confidence the pad diameter has a significant effect on the reliability of CBGA solder joints whereas the stand-off, the stencil thickness and the ball diameter have little effect on the reliability of CBGA solder joints.展开更多
The weldability of a ferritic ductile cast iron was investigated as a function of different consumables and welding conditions. A 23 full factorial experimental design was used to analyze the effect of factors and the...The weldability of a ferritic ductile cast iron was investigated as a function of different consumables and welding conditions. A 23 full factorial experimental design was used to analyze the effect of factors and their interac- tions on ultimate tensile strength of weldments. The shielded metal arc welding （SMAW） process was used with two types of consumables （E7018 and ENi-CI） under eight different conditions using as-cast samples. The microstructur- al evolution and fracture mechanisms were investigated by optical microscopy and scanning electron microscopy （SEM）, respectively. The hardness, tensile and impact tests were also performed to determine the weld quality. Based on experiment design, preheat, consumable, cooling condition, preheat cooling and preheat-consumable inter- actions were significant factors. Preheat is the most effective factor and in the case of E7018, preheat and cooling conditions were the most sensible factors. It was found that buttering was the most appropriate welding method for ferritic ductile cast iron.展开更多
The inverse heat conduction method is one of methods to identify the casting simulation parameters. A new inverse method was presented according to the Tikhonov regularization theory. One appropriate regularized funct...The inverse heat conduction method is one of methods to identify the casting simulation parameters. A new inverse method was presented according to the Tikhonov regularization theory. One appropriate regularized functional was established, and the functional was solved by the sensitivity coefficient and Newtonaphson iteration method. Moreover, the orthogonal experimental design was used to estimate the appropriate initial value and variation domain of each variable to decrease the number of iteration and improve the identification accuracy and efficiency. It illustrated a detailed case of AlSiTMg sand mold casting and the temperature measurement experiment was done. The physical properties of sand mold and the interracial heat transfer coefficient were identified at the meantime. The results indicated that the new regularization method was efficient in overcoming the ill-posedness of the inverse heat conduction problem and improving the stability and accuracy of the solutions.展开更多
Efficient experiment design is of great significance for the validation of simulation model with high nonlinearity and large input space.Excessive validation experiment raises the cost while insufficient test increase...Efficient experiment design is of great significance for the validation of simulation model with high nonlinearity and large input space.Excessive validation experiment raises the cost while insufficient test increases the risks of accepting an invalid model.In this paper,an adaptive sequential experiment design method combining global exploration criterion and local exploitation criterion is proposed.The exploration criterion utilizes discrepancy metric to improve the space-filling property of the design points while the exploitation criterion employs the leave one out error to discover informative points.To avoid the clustering of samples in the local region,an adaptive weight updating approach is provided to maintain the balance between exploration and exploitation.Besides,the credibility distribution function characterizing the relationship between the input and result credibility is introduced to support the model validation experiment design.Finally,six benchmark problems and an engineering case are applied to examine the performance of the proposed method.The experiments indicate that the proposed method achieves satisfactory performance for function approximation in accuracy and convergence.展开更多
基金Institute of Technological Research–IPT,Fundcao de AmparoàPesquisa do Estado de Sao PauloBrazil[Process 2019/05840-3]+1 种基金Conselho Nacional de Desenvolvimento Científico e TecnológicoBrazil[Process 167470/2018-3]。
文摘As part of efforts to reduce anthropogenic CO_(2) emissions by the steelmaking industry,this study investigated the direct reduction of industrially produced hematite pellets with H_(2) using the Doehlert experimental design to evaluate the effect of pellet diameter(10.5-16.5 mm),porosity(0.36-0.44),and temperature(600-1200℃).A strong interactive effect between temperature and pellet size was observed,indicating that these variables cannot be considered independently.The increase in temperature and decrease in pellet size considerably favor the reduction rate,while porosity did not show a relevant effect.The change in pellet size during the reduction was negligible,except at elevated temperatures due to crack formation.A considerable decrease in mechanical strength at high temperatures suggests a maximum process operating temperature of 900℃.Good predictive capacity was achieved using the modified grain model to simulate the three consecutive non-catalytic gas-solid reactions,considering different pellet sizes and porosities,changes during the reaction from 800 to 900℃.However,for other temperatures,different mechanisms of structural modifications must be considered in the modeling.These results represent significant contributions to the development of ore pellets for CO_(2)-free steelmaking technology.
文摘A spice formulation study in Burkina Faso was carried out using local ingredients for the benefit of households. The objective of this study was to propose some spice formulations based on local ingredients in order to reduce the use of chemical spices in the preparation of different dishes. The Design of Experiments (DOE) methodology was used for the formulation of the spices and their physicochemical, nutritional and sensory characteristics were evaluated by standardized and standard methods. The results obtained showed lipid contents (g/100 g DM) ranging from 10.41 ± 0.26 to 15.64 ± 0.68, total sugars from 4.39 ± 0.32 to 5.46 ± 0.31, protein from 3.65 ± 0.17 to 12.04 ± 0.35 and ash from 5.83 ± 0.01 to 7.02 ± 0.01. The polyphenol content ranged from 9.09 ± 1.60 to 11.33 ± 0.90, and the flavonoid content ranged from 0.65 ± 0.03 to 1.08 ± 0.13. The sensory analysis carried out showed that the spices have generally satisfactory organoleptic characteristics. These results constitute new information in the diet of populations and are an alternative to the chemical spices used in their cooking.
文摘Lattice structures are three-dimensional structures composed of repeated geometrical shapes with multiple interconnected nodes,providing high strength-to-weight ratios,customizable properties,and efficient use of materials.A smart use of materials leads to reduced fuel consumption and lower operating costs,making them highly desirable for aircraft manufacturers.Furthermore,the customizable properties of lattice structures allow for tailoring to specific design requirements,leading to improved performance and safety for aircraft.These advantages make lattice structures an important focus for research and development in the aviation industry.This paper presents an experimental evaluation of the mechanical compression properties of lattice trusses made with Ti6Al4V,designed for use in an anti-ice system.The truss structures were manufactured using additive manufacturing techniques and tested under compressive loads to determine mechanical properties.Results showed that lattice trusses exhibited high levels of compressive strength,making them suitable for use in applications where mechanical resistance and durability are critical,such as in anti-ice systems.We also highlight the potential of additive manufacturing techniques for the fabrication of lattice trusses with tailored mechanical properties.The study provides valuable insights into the mechanical behavior of Ti6Al4V lattice trusses and their potential applications in anti-ice systems,as well as other areas where high strength-to-weight ratios are required.The results of this research contribute to the development of lightweight,efficient,and durable anti-ice systems for use in aviation and other industries.
基金supported by the National Natural Science Foundation of China(52174154).
文摘When the amphibious vehicle navigates in water,the angle of the anti-wave plate and the position of the center of gravity greatly influence the navigation characteristics.In the relevant research on reducing the navigation resistance of amphibious vehicles by adjusting the angle of the anti-wave plate,there is a lack of scientific selection of parameters and reasonable research of simulation results by using mathematical methods,and the influence of the center of gravity position on navigation characteristics is not considered at the same time.To study the influence of the combinations of the angle of the anti-wave plate and the position of the center of gravity on the resistance reduction characteristics,a numerical calculation model of the amphibious unmanned vehicle was established by using the theory of computational fluid dynamics,and the experimental data verified the correctness of the numerical model.Based on this numerical model,the navigation characteristics of the amphibious unmanned vehicle were studied when the center of gravity was located at different positions,and the orthogonal experimental design method was used to optimize the parameters of the angle of the anti-wave plate and the position of the center of gravity.The results show that through the parameter optimization analysis based on the orthogonal experimental method,the combination of the optimal angle of the anti-wave plate and the position of the center of gravity is obtained.And the numerical simulation result of resistance is consistent with the predicted optimal solution.Compared with the maximum navigational resistance,the parameter optimization reduces the navigational resistance of the amphibious unmanned vehicle by 24%.
基金supported by National Natural Science Foundation of China(Grant Nos.11971204,12271270)Natural Science Foundation of Jiangsu Province of China(Grant No.BK20200108)the Zhongwu Youth Innovative Talent Program of Jiangsu University of Technology and the Third Level Training Object of the Sixth“333 Project”in Jiangsu Province。
文摘The order-of-addition experiments are widely used in many fields,including food and industrial production,but the relative research under prior constraints is limited.The purpose of this paper is to select an optimal sequence under the restriction that component i is added before component j,while it is unachievable to compare all sequences when the number of components m is large.To achieve this,a constrained PWO model is first provided,and then the D-optimal designs for order-of addition experiments with minimal-points via the modified threshold accepting algorithm is established.The effectiveness of the proposed method is demonstrated through a job scheduling problem with a prior constraint for teaching cases.
文摘Background: We currently have international and national guidelines regarding the assessment and monitoring of clinical signs and humane endpoints in animals used in teaching and research, which make the performance of these activities mandatory for any experiment and professional working in this area. Assigning the severity of a research experiment is the result of an analysis of records of observations of the animal’s behavior, and clinical signs. The aim of this study was to describe the importance of carrying out a severity assessment associated with clinical and behavioral monitoring of rodents and rabbits during experimentation to maintain the welfare of these animals undergoing scientific research. Methods: The literature search was carried out using the following terms: “Monitoring”;“Humane endpoints”;“Animal welfare”, “Rodents”;“Rabbits”, and as connectors “and”;“or”, in the following databases: PubMed;LILACS/BIREME and SciELO. Results: A total of 987 articles were identified in the databases, and 20 of these studies were included in this review. Conclusions: Humane endpoint protocols and procedure severity tables are of the utmost importance, both from an ethical point and to refine the results of research conducted on laboratory animals. They should be drawn up jointly by the teams responsible for the project and the maintenance of the animals during the research period, and the data obtained should be published so that the scientific community can have access to it, helping to disseminate these practices, as well as helping to draw up new procedures. Monitoring and evaluating the welfare and clinical condition of animals undergoing scientific research procedures is the responsibility of the professors, researchers, veterinarians, and animal facility coordinators. The Ethics Committee on the Use of Animals must monitor all the activities conducted with the animals, by inspecting the experimental procedures and the physical environment of the laboratory animal facility where the animals are housed.
文摘Soil-water characteristic curve (SWCC) is significant to estimate the site-specific unsaturated soil properties (such as unsaturated shear strength and coefficient of permeability) for geotechnical analyses involving unsaturated soils. Determining SWCC can be achieved by fitting data points obtained according to the prescribed experimental scheme, which is specified by the number of measuring points and their corresponding values of the control variable. The number of measuring points is limited since direct measurement of SWCC is often costly and time-consuming. Based on the limited number of measuring points, the estimated SWCC is unavoidably associated with uncertainties, which depends on measurement data obtained from the prescribed experimental scheme. Therefore, it is essential to plan the experimental scheme so as to reduce the uncertainty in the estimated SWCC. This study presented a Bayesian approach, called OBEDO, for probabilistic experimental design optimization of measuring SWCC based on the prior knowledge and information of testing apparatus. The uncertainty in estimated SWCC is quantified and the optimal experimental scheme with the maximum expected utility is determined by Subset Simulation optimization (SSO) in candidate experimental scheme space. The proposed approach is illustrated using an experimental design example given prior knowledge and the information of testing apparatus and is verified based on a set of real loess SWCC data, which were used to generate random experimental schemes to mimic the arbitrary arrangement of measuring points during SWCC testing in practice. Results show that the arbitrary arrangement of measuring points of SWCC testing is hardly superior to the optimal scheme obtained from OBEDO in terms of the expected utility. The proposed OBEDO approach provides a rational tool to optimize the arrangement of measuring points of SWCC test so as to obtain SWCC measurement data with relatively high expected utility for uncertainty reduction.
文摘Mixed-variable problems are inevitable in engineering. However, few researches pay attention to discrete variables. This paper proposed a mixed-variable experimental design method (ODCD): first, the design variables were divided into discrete variables and continuous variables;then, the DVD method was employed for handling discrete variables, the LHD method was applied for continuous variables, and finally, a Columnwise-Pairwise Algorithm was used for the overall optimization of the design matrix. Experimental results demonstrated that the ODCD method outperforms in terms of the sample space coverage performance.
基金The Natural Science Foundation of the Jiangsu Higher Education Institutions of China(22KJD580001)Jiangsu Maritime Institute Innovation Technology Funding Project(kicx2020-2)。
文摘In this paper,we introduce the design principle of the oscillating excited spray cooling experimental device.We then designed an oscillating excited spray cooling experimental device.By using the device,the swaying motion can be realized through the control system,and the motion of the droplet under different vibration frequencies can be observed.By measuring the liquid flow rate and pressure,the changes in liquid flow rate,pressure,and temperature with time under different vibration frequencies were studied.The trajectory of the droplet and the temperature distribution of the droplet under different vibration frequencies could be observed.The device has a simple structure,is easy to control,and can achieve continuous observation of the spray cooling process.
基金supported by the Leverhulme Trust Research Project(Grant No.RPG-2020-021).
文摘Paper and pulp mills generate substantial volumes of wastewater containing lignin-derived compounds that are challenging to degrade using conventional wastewater treatment methods.This study presents a novel biofilm-based process for enhanced lignin removal in wastewater using the fungus Neurospora discreta,which effectively degrades lignin and forms robust biofilms at the air–liquid interface under specific conditions.The process was optimised using the Taguchi design of experiments approach,and three factors including pH,copper sulphate concentration,and trace element concentration were evaluated at three levels.Experimental data were analysed against three responses:lignin degradation efficiency and the activities of two ligninolytic enzymes(polyphenol oxidase and versatile peroxidase).The results indicated that wastewater pH was the most significant parameter affecting lignin degradation efficiency and enzyme activities.Over 70%lignin degradation was achieved at pH levels of 5 and 6 with copper sulphate concentrations above 4 mg/L,while degradation efficiency drastically dropped to 45%at a pH value of 7.Reversed-phase high-performance liquid chromatography analysis demonstrated the effects of the three factors on the polar and non-polar components of lignin in wastewater,revealing a clear decrease in all peak areas after treatment.Additionally,significant relationships were observed between biofilm properties(including porosity,water retention value,polysaccharide content,and protein content)and lignin removal efficiency.This study also reported for the first time the presence of versatile peroxidase,a ligninolytic enzyme,in Neurospora sp.
基金This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 948769, project title: SuN_2rise)the 《HYDREAM》 project–funded by European Union-Next Generation EU–within the PRIN 2022 program (D.D. 104-02/02/2022 Ministero dell’Università e della Ricerca)supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 101107906
文摘Food production demand is constantly growing,entailing a proportional increment in fertilisers and pharmaceuticals use,which are eventually introduced to the environment,leading,among others,to an imbalance in the nitrogen cycle.Electrochemical nitrate reduction reaction is a delocalised route for nitrates elimination and green ammonia production.In the present study,we carry out nitrates electroreduction over a commercial MoS_(2)catalyst,focusing on optimising selected input factors affecting the reaction.Concretely,Doehlert design of experiment and response surface methodology are employed to find the proper combination of supporting salt concentration in the electrolyte,applied potential,and catalyst loading at the working electrode,with the overall aim to boost Faradaic efficiency(FE)and ammonia production.As a matter of fact,varying these input factors,the obtained FE values ranged from∼2%to∼80%,highlighting the strength of the newly conceived approach.Moreover,our multivariate strategy allows the quantification of each factor effect and elucidates hidden interactions between them.Finally,successful extended durability tests are performed for 100 h at both FE and productivity(P)optimal conditions.In parallel,cell electrodes are characterised by in-depth structural,morphological,and surface techniques,before and after ageing,overall demonstrating the outstanding stability of the proposed electrochemical reactor.
文摘During the process of organizing our original data,we unfortunately identified two error in the figures within our published article.In Fig.1,the online version incorrectly labels the SNI+NAC group as the sham+NAC group.We have revised the grouping annotations in Fig.1 and have labeled the DHE staining in the figure to present the experimental design more clearly.
基金Sponsored by the Spacial Project of Research on Revolutionary Cultural Relics for College Students in 2024(2024DXSGMWW50)Innovation Fund Project for Postgraduates of Jiangxi Provincial Department of Education(YC2024-S228).
文摘How exhibitions of revolutionary cultural relics affect and enhance the audience’s comprehensive experiences was discussed from aspects of bodily perception,spatial interaction,emotional resonance,and value identification,and the experience design of exhibitions of revolutionary cultural relics was further studied to better carry and convey the spirit of the revolution.Guided by embodied theory,this study was provided with methodological support from various perspectives,and analyzed the current development and existing problems of exhibitions of revolutionary cultural relics through field investigations.Currently,embodied theory is gradually being applied in exhibition design,and the focus of exhibitions is shifted from“objects”to“people”.By collecting direct feelings and feedback from the audience on the exhibitions of revolutionary cultural relics,and theoretical construction and practical application for the experience design of these exhibitions are solidly supported.The needs for emotional and inspirational awakening,education and learning,participation and interaction were revealed.Based on the audience’s behavior,a four-step design method was proposed:enhancing the sense of place,enriching sensory experience,strengthening interactive experiences,and fostering a sense of belonging.Through the application of experiential design in these four dimensions,it aims to reshape the methods of exhibitions of revolutionary cultural relics and promote a deep integration between the exhibitions and embodied theory.
文摘This study examines the efficacy of Avicennia marina(AM)leaves as an environmentally sustainable biosorbent for the extraction of methylene blue(MB)dye from wastewater.A hybrid approach of Response Surface Methodology(RSM)and Artificial Neural Networks(ANN)was implemented to assess,optimize,and forecast biosorption effectiveness across different operating parameters.The experimental design employed a Central Composite Design(CCD)methodology,focusing on critical parameters including pH,initial dye concentration,temperature,and biosorbent dosage.The ideal biosorption parameters were identified as a temperature of 44.3℃,pH 7.1,a biosorbent dosage of 0.3 grams,and an initial dye concentration of 48.4 mg/L,resulting in a maximum removal efficiency of 84.26%.The ANN model exhibited significant prediction accuracy,so confirming its appropriateness for predicting and enhancing intricate biosorption processes.The findings underscore that AM leaves constitute a cost-efficient,plentiful,and ecologically sustainable resource for wastewater treatment purposes.Furthermore,the amalgamation of RSM and ANN shown significant efficacy in process optimization and forecasting.These findings provide significant insights into the advancement of eco-friendly solutions for the treatment of dye-contaminated water.Subsequent study must prioritize the amplification of the procedure for industrial applications,the execution of ongoing system assessments,and the evaluation of the enduring environmental and economic ramifications of utilizing AM leaves as a biosorbent.
基金Supported by National Science&Technology Pillar Program of China(Grant No.2014BAB08B01)National Natural Science Foundation of China(Grant No.51409123)+1 种基金Jiangsu Provincial Natural Science Foundation of China(Grant No.BK20140554)Training Project for Young Core Teacher of Jiangsu University,China
文摘Cavitation is one of the most important performance of centrifugal pumps. However, the current optimization works of centrifugal pump are mostly focusing on hydraulic efficiency only, which may result in poor cavitation performance. Therefore, it is necessary to find an appropriate solution to improve cavitation performance with acceptable efficiency. In this paper, to improve the cavitation performance of a centrifugal pump with a vaned diffuser, the influence of impeller geometric parameters on the cavitation of the pump is investigated using the orthogonal design of experiment （DOE） based on computational fluid dynamics. The impeller inlet diameter D1, inlet incidence angle Aft, and blade wrap angle ~0 are selected as the main impeller geometric parameters and the orthogonal experiment of L9（3＂3） is performed. Three-dimensional steady simulations for cavitation are conducted by using constant gas mass fraction model with second-order upwind, and the predicated cavitation performance is validated by laboratory experiment. The optimization results are obtained by the range analysis method to improve cavitation performance without obvious decreasing the efficiency of the centrifugal pump. The internal flow of the pump is analyzed in order to identify the flow behavior that can affect cavitation performance. The results show that D1 has the greatest influence on the pump cavitation and the final optimized impeller provides better flow distribution at blade leading edge. The final optimized impeller accomplishes better cavitation and hydraulic performance and the NPSHR decreases by 0.63m compared with the original one. The presented work supplies a feasible route in engineering practice to optimize a centrifugal pump impeller for better cavitation performance.
文摘Security monitoring system of coal mines is indispensable to ensure the safe and efficient production of colliery. Due to the special and narrow underground field of the coal mine, the electromagnetic interference can cause a series of misstatements and false positives on the monitoring system, which will severely hamper the safe production of coal industry. In this paper, first, the frequency characteristics of the interference source on the power line are extracted when equipment runs normally. Then the finite difference time domain method is introduced to analyze the effects of the electromagnetic interference parameters on the security monitoring signal line. And the interference voltage of the two terminal sides on the single line is taken as evaluating indexes. Finally, the electromagnetic interference parameters are optimized by orthogonal experimental design based on the MATLAB simulation on the normal operation of equipment.
基金This work was supported by Science Foundation of Guangxi Zhuang Autonomous Region (Contract No. 02336060).
文摘Four process parameters, pad diameter, stencil thickness, ball diameter and stand-off were chosen as four control factors. By using an L25 （5^6 ） orthogonal array the ceramic ball grid array （ CBGA ） solder joints which have 25 different combinations of process parameters were designed. The numerical models of all the 25 CBGA solder joints were developed using the Sugrace Evolver. Utilizing the sugrace coordinate exported from the 25 CBGA solder joints numerical models, the finite element analysis models were set up and the nonlinear finite element analysis of the CBGA solder joints under thermal cycles were pegrormed by ANSYS. The thermal fatigue life of CBGA solder joint was calculated using Coffin-Manson equation. Based on the calculated thermal fatigue life results, the range analysis and the variance analysis were pegrormed. The results show that the fatigue life of CBGA solder joint is affected by the pad diameter, the stencil thickness, the ball diameter and the stand-off in a descending order, the best combination of process parameters results in the longest fatigue life is 0.07 mm stand-off, 0.125 mm stencil thickness of, 0.85 mm ball diameter and 0. 89 mm pad diameter. With 95% confidence the pad diameter has a significant effect on the reliability of CBGA solder joints whereas the stand-off, the stencil thickness and the ball diameter have little effect on the reliability of CBGA solder joints.
文摘The weldability of a ferritic ductile cast iron was investigated as a function of different consumables and welding conditions. A 23 full factorial experimental design was used to analyze the effect of factors and their interac- tions on ultimate tensile strength of weldments. The shielded metal arc welding （SMAW） process was used with two types of consumables （E7018 and ENi-CI） under eight different conditions using as-cast samples. The microstructur- al evolution and fracture mechanisms were investigated by optical microscopy and scanning electron microscopy （SEM）, respectively. The hardness, tensile and impact tests were also performed to determine the weld quality. Based on experiment design, preheat, consumable, cooling condition, preheat cooling and preheat-consumable inter- actions were significant factors. Preheat is the most effective factor and in the case of E7018, preheat and cooling conditions were the most sensible factors. It was found that buttering was the most appropriate welding method for ferritic ductile cast iron.
文摘The inverse heat conduction method is one of methods to identify the casting simulation parameters. A new inverse method was presented according to the Tikhonov regularization theory. One appropriate regularized functional was established, and the functional was solved by the sensitivity coefficient and Newtonaphson iteration method. Moreover, the orthogonal experimental design was used to estimate the appropriate initial value and variation domain of each variable to decrease the number of iteration and improve the identification accuracy and efficiency. It illustrated a detailed case of AlSiTMg sand mold casting and the temperature measurement experiment was done. The physical properties of sand mold and the interracial heat transfer coefficient were identified at the meantime. The results indicated that the new regularization method was efficient in overcoming the ill-posedness of the inverse heat conduction problem and improving the stability and accuracy of the solutions.
基金supported by the National Natural Science Foundation of China(No.61627810)。
文摘Efficient experiment design is of great significance for the validation of simulation model with high nonlinearity and large input space.Excessive validation experiment raises the cost while insufficient test increases the risks of accepting an invalid model.In this paper,an adaptive sequential experiment design method combining global exploration criterion and local exploitation criterion is proposed.The exploration criterion utilizes discrepancy metric to improve the space-filling property of the design points while the exploitation criterion employs the leave one out error to discover informative points.To avoid the clustering of samples in the local region,an adaptive weight updating approach is provided to maintain the balance between exploration and exploitation.Besides,the credibility distribution function characterizing the relationship between the input and result credibility is introduced to support the model validation experiment design.Finally,six benchmark problems and an engineering case are applied to examine the performance of the proposed method.The experiments indicate that the proposed method achieves satisfactory performance for function approximation in accuracy and convergence.
