Textured Bi and MnBi/Bi thin films are prepared by the pulsed laser deposition method. The highly c-axis textured MnBi films are obtained by annealing the bilayer consisting of textured Bi and Mn films. The eoerciviti...Textured Bi and MnBi/Bi thin films are prepared by the pulsed laser deposition method. The highly c-axis textured MnBi films are obtained by annealing the bilayer consisting of textured Bi and Mn films. The eoercivities of the MnBi/Bi film are 1.5 T and 2.35 T at room temperature and at 373K, respectively, showing a positive temperature coefficient. Microstructural investigations show that the textured MnBi film results from the orientated growth induced by the textured Bi under-layer.展开更多
As a direct wide bandgap semiconductor,CsPbCl_(3)has great potential applications in the eld of near-ultraviolet photodetectors,lasers and higher-order multiphoton uores-cent detectors.In this work,we synthesized CsPb...As a direct wide bandgap semiconductor,CsPbCl_(3)has great potential applications in the eld of near-ultraviolet photodetectors,lasers and higher-order multiphoton uores-cent detectors.In this work,we synthesized CsPbCl_(3)micro/nanocrystals by vapor depo-sition method with CsCl and PbCl_(2)powders as the source materials.It was con rmed that the formation of CsPbCl_(3)perovskite through the chemical reaction of CsCl with PbCl_(2)occurred in the quartz boat before the source evaporation,not in vapor or on sub-strate surface.The evaporated CsPbCl_(3)can form micro/nanocrystals on substrate surfaces under appropriate conditions.Various morphologies including irregular polyhedrons,rods and pyramids could be observed at lower temperature,while stable and uniform CsPbCl_(3)single crystal microplatelets were controllably synthesized at 450℃.Prolonging the growth time could modulate the size and density of the microcrystals,but could not change the morphology.Substrate types made little di erence to the morphology of CsPbCl_(3)crystals.The photoluminescence spectra indicated that the crystallinity and morphology of CsPbCl_(3)micro/nanocrystals have signi cant e ects on their optical properties.The work is expected to be helpful to the development of optoelectronic devices based on individual CsPbCl_(3)microcrystal.展开更多
A sequential deposition method is developed, where the hybrid organic-inorganic halide perovskite （CH3NH3Pb （I1-xBrx）3 ） is synthesized using precursor solutions containing CH3NH3I and PbBr2 with different mole ra...A sequential deposition method is developed, where the hybrid organic-inorganic halide perovskite （CH3NH3Pb （I1-xBrx）3 ） is synthesized using precursor solutions containing CH3NH3I and PbBr2 with different mole ratios and reaction times. The perovskite achieved here is quite stable in the atmosphere for a relatively long time without noticeable degradation, and the perovskite nanowires are proved to be single crystalline structure, based on transmission electron microscopy.Furthermore, strong red photoluminescence from perovskite is observed in the wavelength range from 746nm to 770nm with the increase of the reaction time, on account of the exchanges between I- ions and Br- ions in the perovskite crystal. Lastly, the influences of concentration and reaction time of the precursor solutions are discussed, which are important for evolution of hybrid perovskite from nanocuboid to nanowire and nanosheet.展开更多
Janus films with asymmetric physical/chemical properties have attracted con siderable attention due to their promising applications in personal thermal management,electronic skin s,sensors,actuators,etc.However,tradit...Janus films with asymmetric physical/chemical properties have attracted con siderable attention due to their promising applications in personal thermal management,electronic skin s,sensors,actuators,etc.However,traditional methods for fabricating Janus films conventionally need the assistance of an interface or auxiliary equipment,which are usually complex and time-consuming.Herein,flexible poly(vinyl alcohol)(PVA)/graphene oxide(GO)/h-BN(recorded as PVA/GO/h-BN)Janus films with thermally,optically,and electrically anisotropic properties are fabricated by a simple density deposition self-assem bly method,which just utilizes the density difference between GO and h-BN during water evaporation.Experimental results show that the two sides of the acquired Janus films have obvious asymmetric characteristics.In the original state of the PVA/GO/h-BN Janus films,the thermal conductivity of the GO side(10.06 W·m^(-1)·K^(-1))is generally lower than that of the h-BN side(10.48W·m^(-1)·K^(-1)).But after GO is reduced,the thermal conductivity of the rGO side reaches 12.17 W·m^(-1)·K^(-1),surpassing that of the h-BN side.In addition,the relative reflectance of the h-BN side of Janus film is also significantly higher than that of the rGO side,and the su rface resistance difference between the two sides is about 4 orders of magnitude.The prepared PVA/GO/h-BN Janus films show great application potential in human thermal management,light conversion switches,and electronic skins.This study provides a simple and versatile strategy for fabricating Janus films with multifunctional(such as thermal,optical,and electrical)anisotropies.展开更多
Mgo-Cao refractories are widely used in the iron and steel metalurgy industry due to their advantages of purifying molten steel,high refractoriness,good thermal shock resistance,and excellent corrosion resistance to b...Mgo-Cao refractories are widely used in the iron and steel metalurgy industry due to their advantages of purifying molten steel,high refractoriness,good thermal shock resistance,and excellent corrosion resistance to basic slags.However,hydration occurs during the manufacturing,storage,and transportation of refractories,which severely limits their application.Mgo-CaO clinker is the main raw material for Mgo-Cao refractories,and its hydration resistance determines the development of the latter case.Herein,the Mgo-Cao clinker was modified using myristic acid as the modifying agent by the liquid-phase deposition method.The effects of the particle size of the raw materials,concentration of myristic acid,treatment temperature and time on the phase composition and hydration resistance of the modified Mgo-Cao clinkers were investigated in detail.The results show that the samples with an agent concentration of 0.25 mol L^(-1) and treated at 25℃ for 1 h exhibit the optimal hydration resistance properties,namely a low hydration mass gain rate(0.23%)and a large water contact angle(152.9).展开更多
Fractal and multi-fractal content area method finds application in a wide variety of geological,geochemical and geophysical fields.In this study,the fractal content-gradient method was used on1：10,000 scale to deline...Fractal and multi-fractal content area method finds application in a wide variety of geological,geochemical and geophysical fields.In this study,the fractal content-gradient method was used on1：10,000 scale to delineate geochemical anomalies associated with copper mineralization.Analysis of geochemical data from the Yangla super large Cu-Pb-Zn polymetallic ore district using the fractal content-gradient method,combined with other geological data from this area,indicates that oreprospecting in the ore district should focus on Cu as the main metal and Pb-Zn and Au as the auxiliary metals.The types of deposits include（in chronological order） re-formed sedimentary exhalative（SEDEX）,skarns,porphyries,and hydrothermal vein-type deposits.Three ore-prospecting targets are divided on a S-N basis：（1） the Qulong exploration area,in which the targets are porphyry-type Cu deposits;（2） the Zongya exploration area,where the targets are porphyry-type Cu and hydrothermal vein-type Cu-Pb polymetallic deposits;and（3） the Zarelongma exploration area,characterized mainly skarn-type ＂Yangla-style＂ massive sulfide Cu-Pb deposits.Our study demonstrates that the fractal content-gradient method is convenient,simple,rapid,and direct for delineating geochemical anomalies and for outlining potential exploration targets.展开更多
La-doped and undoped xBiIn03-（1 - x）PbTi03 （BI-PT） thin films are deposited on （101）SrRuO3/（lOO）Pt/（lO0） MgO substrates by the rf-magnetron sputtering method. The structures of the films are characterized by...La-doped and undoped xBiIn03-（1 - x）PbTi03 （BI-PT） thin films are deposited on （101）SrRuO3/（lOO）Pt/（lO0） MgO substrates by the rf-magnetron sputtering method. The structures of the films are characterized by XRD and SEM, and the results indicate that the thin films are grown with mainly （100） oriented and columnar structures. The ferroelectricity and piezoelectricity of the BI-PT films are also measured, and the measured results illustrate that both performances are effectively improved by the La-doping with suitable concentrations. These results will open up wide potential applications of the films in electronic devices.展开更多
A new method of fabricating C/C composite materials, namely electric heating CVD method, was used, which electrified the carbon fiber directly by using the conductivity of itself. Acetylene was used as the carbon sour...A new method of fabricating C/C composite materials, namely electric heating CVD method, was used, which electrified the carbon fiber directly by using the conductivity of itself. Acetylene was used as the carbon source with nitrogen as dilution gas, and the pyrolytic carbon started to deposit on the carbon fiber surface when the deposition temperature was reached. The morphology of pyrolytic carbon was characterized by SEM, and the surface properties of carbon fibers before and after CVD were characterized by Raman spectroscopy. The experimental results show that the electric heating method is a novel method to fabricate C/C composite materials, which can form a dense C/C composite material in a short time. The order degree and the average crystallite size of the carbon fiber surface were decreased after the experiment.展开更多
Properties of ferroelectric xBiInO3-（1-x）PbTiO3（xBI-（1-x）PT） thin films deposited on（101） SrRuO3/（200）Pt/（200） MgO substrates by rf magnetron sputtering method and effects of deposition conditions are inve...Properties of ferroelectric xBiInO3-（1-x）PbTiO3（xBI-（1-x）PT） thin films deposited on（101） SrRuO3/（200）Pt/（200） MgO substrates by rf magnetron sputtering method and effects of deposition conditions are investigated.The structures of the xBI-（1-x）PT films are characterized by x-ray diffraction and scanning electron microscopy.The results indicate that the thin films are grown with mainly（001） orientation. The chemical compositions of the films are analyzed by scanning electron probe and the results indicate that the loss phenomena of Pb and Bi elements depend on the pressure and temperature during the sputtering process.The sputtering parameters including target composition, substrate temperature, and gas pressure are adjusted to obtain optimum sputtering conditions. To decrease leakage currents,2 mol% La2 O3 is doped in the targets. The P-E hysteresis loops show that the optimized xBI-（1-x）PT（x = 0.24） film has high ferroelectricities with remnant polarization2 Pr = 80μC/cm2 and coercive electric field 2 EC = 300 kV/cm. The Curie temperature is about 640℃. The results show that the films have optimum performance and will have wide applications.展开更多
Chemical vapor deposition has emerged as the most promising technique for the growth of graphene.However, most reports of this technique use either flammable or explosive gases, which bring safety concerns and extra c...Chemical vapor deposition has emerged as the most promising technique for the growth of graphene.However, most reports of this technique use either flammable or explosive gases, which bring safety concerns and extra costs to manage risk factors. In this article, we demonstrate that continuous monolayer graphene can be synthesized via chemical vapor deposition technique on Cu foils using industrially safe gas mixtures. Important factors, including the appropriate ratio of hydrogen flow and carbon precursor,pressure, and growth time are considered to obtain graphene films. Optical measurements and electrical transport measurements indicate graphene films are with comparable quality to other reports. Such continuous large area graphene can be synthesized under non-flammable and non-explosive conditions, which opens a safe and economical method for mass production of graphene. It is thereby beneficial for integration of graphene into semiconductor electronics.展开更多
N-polar GaN film was obtained by using a high-temperature AlN buffer layer.It was found that the polarity could be inverted by a thin low-temperature AlN interlayer with the same V/III ratio as that of the high-temper...N-polar GaN film was obtained by using a high-temperature AlN buffer layer.It was found that the polarity could be inverted by a thin low-temperature AlN interlayer with the same V/III ratio as that of the high-temperature AlN layer.Continuing to increase the V/III ratio of the low-temperature AlN interlayer,the Ga-polarity of GaN film was inverted to N-polarity again but the crystal quality and surface roughness of GaN film greatly deteriorated.Finally,we analyzed the chemical environment of the AlN layer by x-ray photoelectron spectroscopy(XPS),which provides a new direction for the control of GaN polarity.展开更多
It is well known that the photocatalytic activity of TiO_2 thin filmsstrongly depends on the preparing methods and post-treatment conditions, since they have a decisiveinfluence on the chemical and physical properties...It is well known that the photocatalytic activity of TiO_2 thin filmsstrongly depends on the preparing methods and post-treatment conditions, since they have a decisiveinfluence on the chemical and physical properties of TiO_2 thin films. Therefore, it is necessary toelucidate the influence of the preparation process and post-treatment conditions on thephoto-catalytic activity and surface microstructures of the films. This review deals with thepreparation of TiO_2 thin film photo-catalysts by wet-chemical methods (such as sol-gel,-reversemicellar and liquid phase deposition) and the comparison of various preparation methods as well astheir advantage and disadvantage. Furthermore, it is discussed that the advancement ofphotocatalytic activity, super-hydrophilicity and bactericidal activity of TiO_2 thin filmphotocatalyst in recent years.展开更多
Thin cuprous oxide films have been prepared by chemical vapor deposition(pulsed spray evaporation-chemical vapor deposition)method without post-treatment.The synthesis of cuprous oxide was produced by applying a water...Thin cuprous oxide films have been prepared by chemical vapor deposition(pulsed spray evaporation-chemical vapor deposition)method without post-treatment.The synthesis of cuprous oxide was produced by applying a water strategy effect.Then,the effect of water on the morphology,topology,structure,optical properties and surface composition of the obtained films has been comprehensively investigated.The results reveal that a pure phase of Cu2O was obtained.The introduction of a small quantity of water in the liquid feedstock lowers the band gap energy from 2.16 eV to 2.04 eV.This finding was mainly related to the decrease of crystallite size due to the effect of water.The topology analyses,by using atomic force microscope,also revealed that surface roughness decreases with water addition,namely more uniform covered surface.Moreover,theoretical calculations based on density functional theory method were performed to understand the adsorption and reaction behaviors of water and ethanol on the Cu2O thin film surface.Formation mechanism of the Cu2O thin film was also suggested and discussed.展开更多
In the present investigation, we fabricated strontium (Sr2+) incorporated CsPbI2Br-based inorganic perovskite solar cells in ambient conditions. The morphology, crystallinity, absorption, elemental composition and pho...In the present investigation, we fabricated strontium (Sr2+) incorporated CsPbI2Br-based inorganic perovskite solar cells in ambient conditions. The morphology, crystallinity, absorption, elemental composition and photoluminescence analysis of the bare CsPbI2Br and CsPb1-xSrxI2Br perovskite thin films were studied systematically to investigate the role of Sr2+ incorporation. It is observed that the surface morphology of the CsPbI2Br perovskite thin film has been improved by partial substitution of Pb2+ by Sr2+ which facilitates photoactive black phase-stabilization and defect passivation. The champion device having CsPb0.98Sr0.02I2Br composition exhibited a power conversion efficiency (PCE) of 16.61% which is much higher than the bare device (13.65%). Furthermore, our CsPb0.98Sr0.02I2Br-based devices maintain > 85% of its initial efficiency over 100 h in ambient conditions.展开更多
The effects of natural andgeochemical factors depending on heavy metal contamination in nuisance dust particles were evaluated. The nuisance dust particles were sampled using passive deposit gauge method for one year ...The effects of natural andgeochemical factors depending on heavy metal contamination in nuisance dust particles were evaluated. The nuisance dust particles were sampled using passive deposit gauge method for one year from April2010 to March2011 and the obtained samples were measured for the total contents and the contamination levels of Fe, Mn, Cu and As usinggeo-accumulation index （Igeo ）, enrichment factor （EF） and the integrated pollution index （IPI）. The results showed that, the contamination levels of Fe and Mn based on Igeo values, were uncontaminated （Igeo 〈 0） （variations of the Igeo index was from -3.11 to -1.751 for Fe, from -0.630 to -1.925 for Mn）, while the values of Cu and As were demonstrated to have moderate contamination based on Igeo values （variations of Igeo index was from -1.125 to 0.848 for Cu, and from -2.002 to 1.249 for As）. The analysis of EF also revealed minor to moderate enrichment for Mn （1.215-4.214）, minor to moderately severe enrichment for Cu （2.791-6.484）, and As （1.370-8.462）, respectively. The variation of the IPI index also showed low to moderate level of heavy metal pollution in nuisance dust particulates （0.511-1.829）. The analysis of the results also approved that the natural processes andgeochemical variables （the changing meteorological parameters） can significantly affect the availability of heavy metals in nuisance dust particles in Western Iran.展开更多
Modelling of the agglomeration and deposition on a constricted tube collector of colloidal size particles immersed in a liquid is investigated using the discrete element method （DEM）. The ability of this method to r...Modelling of the agglomeration and deposition on a constricted tube collector of colloidal size particles immersed in a liquid is investigated using the discrete element method （DEM）. The ability of this method to represent surface interactions allows the simulation of agglomeration and deposition at the particle scale. The numerical model adopts a mechanistic approach to represent the forces involved in colloidal suspensions by including near-wall drag retardation, surface interaction and Brownian forces. The model is implemented using the commercially available DEM package EDEM 2.3~, so that results can be repli- cated in a standard and user-friendly framework. The effects of various particle-to-collector size ratios, inlet fluid flow-rates and particle concentrations are examined and it is found that deposition efficiency is strongly dependent on the inter-relation of these parameters. Particle deposition and re-suspension mechanisms have been identified and analyzed thanks to EDEM＇s post processing capability. One-way coupling with computational fluid dynamics （CFD） is considered and results are compared with a two- way coupling between EDEM 2.3 and FLUENT 12.1. It is found that two-way coupling requires circa 500% more time than one-way coupling for similar results.展开更多
Photo-corrosion is one of the major obstacles for CdS application in wet chemical fields, and atomic layer deposition （ALD） has been proposed as an effective way to suppress the corrosion. Here, prior to ALD coating...Photo-corrosion is one of the major obstacles for CdS application in wet chemical fields, and atomic layer deposition （ALD） has been proposed as an effective way to suppress the corrosion. Here, prior to ALD coating, CdS, one facilely corrosive photocatalyst, was synthesized via hydrothermal synthesis to access the fundamental corrosion mechanism and the according corrosive sites. X-ray photoelectron spectros- copy （XPS） and X-ray diffraction （XRD） demonstrated that the failure of catalytic decomposition of methylene blue originated from the formation of soluble CdSO4 by oxidizing S2 of as-prepared CdS. High resolu- tion transmission electron microscopy （HRTEM） further identified the active sites in the V-shaped regions ofCdS nanoparticles, confirmed by the simulated electric field distribution. To rationally coat oxides on CdS, the right candidates and their thicknesses have been considered by our tunneling model with trans- fer matrix method based on quantum mechanism, upon which the thickness of protective layer should be less than 0.5 nm to maintain a high tunneling probability, and thus one cycle of ALD TiO2 or AbO3 was proposed to passivate the CdS powder to balance the carrier transportation and corrosion suppres- sion. Based on HRTEM results, we found that the active V-shaped region was covered by ALD oxides （TiO2 or AbO3）. For each case, no soluble CdSO4 has been found before and after photocatalytic reactions based XPS measurements. Importantly, we noticed that with the passivation of one cycle of ALD, the catalyst＇s lifetime was elongated up to 〉14 times higher than that of the as-prepared CdS.展开更多
This paper presents a high-efficiency technique based on dielectrophoresis (DEP) for assembling metal, semiconductor, and polymer nanorods, which are synthesized by electrochemical deposition (ECD). The assembly patte...This paper presents a high-efficiency technique based on dielectrophoresis (DEP) for assembling metal, semiconductor, and polymer nanorods, which are synthesized by electrochemical deposition (ECD). The assembly patterns of these nanorods (width: 20 nm; length: 7 μm) were designed using a finite element method (FEM) simulation tool. Further, these nanorods were used in our experiment after their assembly patterns were fabricated. The assembly yield was found to be approximately 70% at an AC voltage of 30 Vp-p and at frequencies of 20 and 30 kHz, and the DC voltage prevented the random alignment of the nanorods at the edge of the assembly pattern. Moreover, the above-mentioned nanorods, which had different permittivities, were found to have similar assembly yields. The proposed method can be improved and applied to nanostructure device fabrication.展开更多
For deposit body medium, the internal structural properties may be the controlling factors for the strength of the material and the mechanical response. Based on the results of soil-rock meso-statistics using digital ...For deposit body medium, the internal structural properties may be the controlling factors for the strength of the material and the mechanical response. Based on the results of soil-rock meso-statistics using digital imaging, a simulated annealing algorithm is adopted to expand the meso-structural features of deposit bodies in 3D. The construction of the 3D meso-structure of a deposit body is achieved, and then the particle flow analysis program PFC3 D is used to simulate the mechanical properties of the deposit body. It is shown that with a combination of the simulated annealing algorithm and the statistical feature functions, the randomness and heterogeneity of the rock distribution in the 3D inner structure of deposit body medium can be realized, and the reconstructed structural features of the deposit medium can match the features of the digital images well. The spatial utilizations and the compacting effects of the body-centered cubic, hexagonal close and face-centered packing models are high, so these structures can be applied in the simulations of the deposit structures. However, the shear features of the deposit medium vary depending on the different model constructive modes. Rocks, which are the backbone of the deposit, are the factors that determine the shear strength and deformation modulus of the deposit body. The modeling method proposed is useful for the construction of 3D meso-scope models from 2D meso-scope statistics and can be used for studying the mechanical properties of mixed media, such as deposit bodies.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 51171001,51371009 and 50971003the Foundation of Key Laboratory of Neutron Physics of CAEP under Grant No 2014BB02
文摘Textured Bi and MnBi/Bi thin films are prepared by the pulsed laser deposition method. The highly c-axis textured MnBi films are obtained by annealing the bilayer consisting of textured Bi and Mn films. The eoercivities of the MnBi/Bi film are 1.5 T and 2.35 T at room temperature and at 373K, respectively, showing a positive temperature coefficient. Microstructural investigations show that the textured MnBi film results from the orientated growth induced by the textured Bi under-layer.
基金supported by the National Natu-ral Science Foundation of China(No.11575187)the National Key Research and Development Program(No.2016YFB0700205).
文摘As a direct wide bandgap semiconductor,CsPbCl_(3)has great potential applications in the eld of near-ultraviolet photodetectors,lasers and higher-order multiphoton uores-cent detectors.In this work,we synthesized CsPbCl_(3)micro/nanocrystals by vapor depo-sition method with CsCl and PbCl_(2)powders as the source materials.It was con rmed that the formation of CsPbCl_(3)perovskite through the chemical reaction of CsCl with PbCl_(2)occurred in the quartz boat before the source evaporation,not in vapor or on sub-strate surface.The evaporated CsPbCl_(3)can form micro/nanocrystals on substrate surfaces under appropriate conditions.Various morphologies including irregular polyhedrons,rods and pyramids could be observed at lower temperature,while stable and uniform CsPbCl_(3)single crystal microplatelets were controllably synthesized at 450℃.Prolonging the growth time could modulate the size and density of the microcrystals,but could not change the morphology.Substrate types made little di erence to the morphology of CsPbCl_(3)crystals.The photoluminescence spectra indicated that the crystallinity and morphology of CsPbCl_(3)micro/nanocrystals have signi cant e ects on their optical properties.The work is expected to be helpful to the development of optoelectronic devices based on individual CsPbCl_(3)microcrystal.
文摘A sequential deposition method is developed, where the hybrid organic-inorganic halide perovskite （CH3NH3Pb （I1-xBrx）3 ） is synthesized using precursor solutions containing CH3NH3I and PbBr2 with different mole ratios and reaction times. The perovskite achieved here is quite stable in the atmosphere for a relatively long time without noticeable degradation, and the perovskite nanowires are proved to be single crystalline structure, based on transmission electron microscopy.Furthermore, strong red photoluminescence from perovskite is observed in the wavelength range from 746nm to 770nm with the increase of the reaction time, on account of the exchanges between I- ions and Br- ions in the perovskite crystal. Lastly, the influences of concentration and reaction time of the precursor solutions are discussed, which are important for evolution of hybrid perovskite from nanocuboid to nanowire and nanosheet.
基金financially supported by the National Natural Science Foundation of China(No.51373059)the Graphene Powder&Composite Materials Research Center of FujianXiamen Key Laboratory of Polymers and Electronic Materials。
文摘Janus films with asymmetric physical/chemical properties have attracted con siderable attention due to their promising applications in personal thermal management,electronic skin s,sensors,actuators,etc.However,traditional methods for fabricating Janus films conventionally need the assistance of an interface or auxiliary equipment,which are usually complex and time-consuming.Herein,flexible poly(vinyl alcohol)(PVA)/graphene oxide(GO)/h-BN(recorded as PVA/GO/h-BN)Janus films with thermally,optically,and electrically anisotropic properties are fabricated by a simple density deposition self-assem bly method,which just utilizes the density difference between GO and h-BN during water evaporation.Experimental results show that the two sides of the acquired Janus films have obvious asymmetric characteristics.In the original state of the PVA/GO/h-BN Janus films,the thermal conductivity of the GO side(10.06 W·m^(-1)·K^(-1))is generally lower than that of the h-BN side(10.48W·m^(-1)·K^(-1)).But after GO is reduced,the thermal conductivity of the rGO side reaches 12.17 W·m^(-1)·K^(-1),surpassing that of the h-BN side.In addition,the relative reflectance of the h-BN side of Janus film is also significantly higher than that of the rGO side,and the su rface resistance difference between the two sides is about 4 orders of magnitude.The prepared PVA/GO/h-BN Janus films show great application potential in human thermal management,light conversion switches,and electronic skins.This study provides a simple and versatile strategy for fabricating Janus films with multifunctional(such as thermal,optical,and electrical)anisotropies.
基金National Natural Science Foundation of China(Grants 52202025 and U23A20559)Natural Science Foundation of Hubei Province(Grant 2022CFB629)+1 种基金"The 14^(th)Five-Year Plan"Hubei Provincial Advantaged Characteristic Disciplines(Groups)Project of Wuhan University of Science and Technology(2023A0307).
文摘Mgo-Cao refractories are widely used in the iron and steel metalurgy industry due to their advantages of purifying molten steel,high refractoriness,good thermal shock resistance,and excellent corrosion resistance to basic slags.However,hydration occurs during the manufacturing,storage,and transportation of refractories,which severely limits their application.Mgo-CaO clinker is the main raw material for Mgo-Cao refractories,and its hydration resistance determines the development of the latter case.Herein,the Mgo-Cao clinker was modified using myristic acid as the modifying agent by the liquid-phase deposition method.The effects of the particle size of the raw materials,concentration of myristic acid,treatment temperature and time on the phase composition and hydration resistance of the modified Mgo-Cao clinkers were investigated in detail.The results show that the samples with an agent concentration of 0.25 mol L^(-1) and treated at 25℃ for 1 h exhibit the optimal hydration resistance properties,namely a low hydration mass gain rate(0.23%)and a large water contact angle(152.9).
基金supported by the fund"Metallogenic Geodynamic Background,Process and Quantitative Evaluation of Super Large Fe-Cu Polymetallic Deposits,Qinghai Qimantag Area"(Grant No.1212011220929)from Beijing Key Laboratory of Land Resources Information Research and Development,China University of Geosciences,Beijing
文摘Fractal and multi-fractal content area method finds application in a wide variety of geological,geochemical and geophysical fields.In this study,the fractal content-gradient method was used on1：10,000 scale to delineate geochemical anomalies associated with copper mineralization.Analysis of geochemical data from the Yangla super large Cu-Pb-Zn polymetallic ore district using the fractal content-gradient method,combined with other geological data from this area,indicates that oreprospecting in the ore district should focus on Cu as the main metal and Pb-Zn and Au as the auxiliary metals.The types of deposits include（in chronological order） re-formed sedimentary exhalative（SEDEX）,skarns,porphyries,and hydrothermal vein-type deposits.Three ore-prospecting targets are divided on a S-N basis：（1） the Qulong exploration area,in which the targets are porphyry-type Cu deposits;（2） the Zongya exploration area,where the targets are porphyry-type Cu and hydrothermal vein-type Cu-Pb polymetallic deposits;and（3） the Zarelongma exploration area,characterized mainly skarn-type ＂Yangla-style＂ massive sulfide Cu-Pb deposits.Our study demonstrates that the fractal content-gradient method is convenient,simple,rapid,and direct for delineating geochemical anomalies and for outlining potential exploration targets.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11174142 and 11304160he National Basic Research Program of China under Grant No 2012CB921504the Special Fund for Public Interest of China under Grant No201510068
文摘La-doped and undoped xBiIn03-（1 - x）PbTi03 （BI-PT） thin films are deposited on （101）SrRuO3/（lOO）Pt/（lO0） MgO substrates by the rf-magnetron sputtering method. The structures of the films are characterized by XRD and SEM, and the results indicate that the thin films are grown with mainly （100） oriented and columnar structures. The ferroelectricity and piezoelectricity of the BI-PT films are also measured, and the measured results illustrate that both performances are effectively improved by the La-doping with suitable concentrations. These results will open up wide potential applications of the films in electronic devices.
基金Funded by the National Natural Science Foundation of China(51165006)
文摘A new method of fabricating C/C composite materials, namely electric heating CVD method, was used, which electrified the carbon fiber directly by using the conductivity of itself. Acetylene was used as the carbon source with nitrogen as dilution gas, and the pyrolytic carbon started to deposit on the carbon fiber surface when the deposition temperature was reached. The morphology of pyrolytic carbon was characterized by SEM, and the surface properties of carbon fibers before and after CVD were characterized by Raman spectroscopy. The experimental results show that the electric heating method is a novel method to fabricate C/C composite materials, which can form a dense C/C composite material in a short time. The order degree and the average crystallite size of the carbon fiber surface were decreased after the experiment.
基金Supported by the National Natural Science Foundation of China under Grant No 11304160the Special Fund for Public Interest of China under Grant No 201510068,and the NUPTFC under Grant No NY215111
文摘Properties of ferroelectric xBiInO3-（1-x）PbTiO3（xBI-（1-x）PT） thin films deposited on（101） SrRuO3/（200）Pt/（200） MgO substrates by rf magnetron sputtering method and effects of deposition conditions are investigated.The structures of the xBI-（1-x）PT films are characterized by x-ray diffraction and scanning electron microscopy.The results indicate that the thin films are grown with mainly（001） orientation. The chemical compositions of the films are analyzed by scanning electron probe and the results indicate that the loss phenomena of Pb and Bi elements depend on the pressure and temperature during the sputtering process.The sputtering parameters including target composition, substrate temperature, and gas pressure are adjusted to obtain optimum sputtering conditions. To decrease leakage currents,2 mol% La2 O3 is doped in the targets. The P-E hysteresis loops show that the optimized xBI-（1-x）PT（x = 0.24） film has high ferroelectricities with remnant polarization2 Pr = 80μC/cm2 and coercive electric field 2 EC = 300 kV/cm. The Curie temperature is about 640℃. The results show that the films have optimum performance and will have wide applications.
文摘Chemical vapor deposition has emerged as the most promising technique for the growth of graphene.However, most reports of this technique use either flammable or explosive gases, which bring safety concerns and extra costs to manage risk factors. In this article, we demonstrate that continuous monolayer graphene can be synthesized via chemical vapor deposition technique on Cu foils using industrially safe gas mixtures. Important factors, including the appropriate ratio of hydrogen flow and carbon precursor,pressure, and growth time are considered to obtain graphene films. Optical measurements and electrical transport measurements indicate graphene films are with comparable quality to other reports. Such continuous large area graphene can be synthesized under non-flammable and non-explosive conditions, which opens a safe and economical method for mass production of graphene. It is thereby beneficial for integration of graphene into semiconductor electronics.
基金Project supported by the National Natural Science Foundation of China(Grant No.62004218)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB33000000).
文摘N-polar GaN film was obtained by using a high-temperature AlN buffer layer.It was found that the polarity could be inverted by a thin low-temperature AlN interlayer with the same V/III ratio as that of the high-temperature AlN layer.Continuing to increase the V/III ratio of the low-temperature AlN interlayer,the Ga-polarity of GaN film was inverted to N-polarity again but the crystal quality and surface roughness of GaN film greatly deteriorated.Finally,we analyzed the chemical environment of the AlN layer by x-ray photoelectron spectroscopy(XPS),which provides a new direction for the control of GaN polarity.
文摘It is well known that the photocatalytic activity of TiO_2 thin filmsstrongly depends on the preparing methods and post-treatment conditions, since they have a decisiveinfluence on the chemical and physical properties of TiO_2 thin films. Therefore, it is necessary toelucidate the influence of the preparation process and post-treatment conditions on thephoto-catalytic activity and surface microstructures of the films. This review deals with thepreparation of TiO_2 thin film photo-catalysts by wet-chemical methods (such as sol-gel,-reversemicellar and liquid phase deposition) and the comparison of various preparation methods as well astheir advantage and disadvantage. Furthermore, it is discussed that the advancement ofphotocatalytic activity, super-hydrophilicity and bactericidal activity of TiO_2 thin filmphotocatalyst in recent years.
基金supported by the Ministry of Science and Technology of China(No.2017YFA0402800)the National Natural Science and Technology of China(No.91541102 and No.51476168)+2 种基金the support by Chinese Academy of Sciences for Senior International Scientists within President’s International Fellowship Initiative(PIFI)programthe financial support during his Ph.D.research stay at Bielefeld UniversityThe Moroccan institute of IRESEN is acknowledged for the financial support(Innowind13 Nanolubricant)
文摘Thin cuprous oxide films have been prepared by chemical vapor deposition(pulsed spray evaporation-chemical vapor deposition)method without post-treatment.The synthesis of cuprous oxide was produced by applying a water strategy effect.Then,the effect of water on the morphology,topology,structure,optical properties and surface composition of the obtained films has been comprehensively investigated.The results reveal that a pure phase of Cu2O was obtained.The introduction of a small quantity of water in the liquid feedstock lowers the band gap energy from 2.16 eV to 2.04 eV.This finding was mainly related to the decrease of crystallite size due to the effect of water.The topology analyses,by using atomic force microscope,also revealed that surface roughness decreases with water addition,namely more uniform covered surface.Moreover,theoretical calculations based on density functional theory method were performed to understand the adsorption and reaction behaviors of water and ethanol on the Cu2O thin film surface.Formation mechanism of the Cu2O thin film was also suggested and discussed.
基金This work was supported by Priority Research Centre Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education,Science,and Technology(NRF-2018R1A6A1A03024334)Also,this work was supported by Priority Research Centre Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education,Science,and Technology(2020R1A2C2004880).
文摘In the present investigation, we fabricated strontium (Sr2+) incorporated CsPbI2Br-based inorganic perovskite solar cells in ambient conditions. The morphology, crystallinity, absorption, elemental composition and photoluminescence analysis of the bare CsPbI2Br and CsPb1-xSrxI2Br perovskite thin films were studied systematically to investigate the role of Sr2+ incorporation. It is observed that the surface morphology of the CsPbI2Br perovskite thin film has been improved by partial substitution of Pb2+ by Sr2+ which facilitates photoactive black phase-stabilization and defect passivation. The champion device having CsPb0.98Sr0.02I2Br composition exhibited a power conversion efficiency (PCE) of 16.61% which is much higher than the bare device (13.65%). Furthermore, our CsPb0.98Sr0.02I2Br-based devices maintain > 85% of its initial efficiency over 100 h in ambient conditions.
文摘The effects of natural andgeochemical factors depending on heavy metal contamination in nuisance dust particles were evaluated. The nuisance dust particles were sampled using passive deposit gauge method for one year from April2010 to March2011 and the obtained samples were measured for the total contents and the contamination levels of Fe, Mn, Cu and As usinggeo-accumulation index （Igeo ）, enrichment factor （EF） and the integrated pollution index （IPI）. The results showed that, the contamination levels of Fe and Mn based on Igeo values, were uncontaminated （Igeo 〈 0） （variations of the Igeo index was from -3.11 to -1.751 for Fe, from -0.630 to -1.925 for Mn）, while the values of Cu and As were demonstrated to have moderate contamination based on Igeo values （variations of Igeo index was from -1.125 to 0.848 for Cu, and from -2.002 to 1.249 for As）. The analysis of EF also revealed minor to moderate enrichment for Mn （1.215-4.214）, minor to moderately severe enrichment for Cu （2.791-6.484）, and As （1.370-8.462）, respectively. The variation of the IPI index also showed low to moderate level of heavy metal pollution in nuisance dust particulates （0.511-1.829）. The analysis of the results also approved that the natural processes andgeochemical variables （the changing meteorological parameters） can significantly affect the availability of heavy metals in nuisance dust particles in Western Iran.
文摘Modelling of the agglomeration and deposition on a constricted tube collector of colloidal size particles immersed in a liquid is investigated using the discrete element method （DEM）. The ability of this method to represent surface interactions allows the simulation of agglomeration and deposition at the particle scale. The numerical model adopts a mechanistic approach to represent the forces involved in colloidal suspensions by including near-wall drag retardation, surface interaction and Brownian forces. The model is implemented using the commercially available DEM package EDEM 2.3~, so that results can be repli- cated in a standard and user-friendly framework. The effects of various particle-to-collector size ratios, inlet fluid flow-rates and particle concentrations are examined and it is found that deposition efficiency is strongly dependent on the inter-relation of these parameters. Particle deposition and re-suspension mechanisms have been identified and analyzed thanks to EDEM＇s post processing capability. One-way coupling with computational fluid dynamics （CFD） is considered and results are compared with a two- way coupling between EDEM 2.3 and FLUENT 12.1. It is found that two-way coupling requires circa 500% more time than one-way coupling for similar results.
基金supported by the National Natural Science Foundation of China(Nos.11304161,11104148,21573117,51171082,11404172 and 61322508)the 1000 Youth Talents Plan+2 种基金the Tianjin Natural Science Foundation(Nos.13JCYBJC41100 and 14JCZDJC37700)the National Basic Research Program of China(973 Program,Nos.2014CB931703 and 2013CB328701)the Fundamental Research Funds for the Central Universities
文摘Photo-corrosion is one of the major obstacles for CdS application in wet chemical fields, and atomic layer deposition （ALD） has been proposed as an effective way to suppress the corrosion. Here, prior to ALD coating, CdS, one facilely corrosive photocatalyst, was synthesized via hydrothermal synthesis to access the fundamental corrosion mechanism and the according corrosive sites. X-ray photoelectron spectros- copy （XPS） and X-ray diffraction （XRD） demonstrated that the failure of catalytic decomposition of methylene blue originated from the formation of soluble CdSO4 by oxidizing S2 of as-prepared CdS. High resolu- tion transmission electron microscopy （HRTEM） further identified the active sites in the V-shaped regions ofCdS nanoparticles, confirmed by the simulated electric field distribution. To rationally coat oxides on CdS, the right candidates and their thicknesses have been considered by our tunneling model with trans- fer matrix method based on quantum mechanism, upon which the thickness of protective layer should be less than 0.5 nm to maintain a high tunneling probability, and thus one cycle of ALD TiO2 or AbO3 was proposed to passivate the CdS powder to balance the carrier transportation and corrosion suppres- sion. Based on HRTEM results, we found that the active V-shaped region was covered by ALD oxides （TiO2 or AbO3）. For each case, no soluble CdSO4 has been found before and after photocatalytic reactions based XPS measurements. Importantly, we noticed that with the passivation of one cycle of ALD, the catalyst＇s lifetime was elongated up to 〉14 times higher than that of the as-prepared CdS.
基金Project supported by the Basic Research Program of the Korea Science & Engineering Foundation (No. R0120060001027202006)the Basic Science Research Program through the National Research Foundation of Korea (No. 2010-0001882)
文摘This paper presents a high-efficiency technique based on dielectrophoresis (DEP) for assembling metal, semiconductor, and polymer nanorods, which are synthesized by electrochemical deposition (ECD). The assembly patterns of these nanorods (width: 20 nm; length: 7 μm) were designed using a finite element method (FEM) simulation tool. Further, these nanorods were used in our experiment after their assembly patterns were fabricated. The assembly yield was found to be approximately 70% at an AC voltage of 30 Vp-p and at frequencies of 20 and 30 kHz, and the DC voltage prevented the random alignment of the nanorods at the edge of the assembly pattern. Moreover, the above-mentioned nanorods, which had different permittivities, were found to have similar assembly yields. The proposed method can be improved and applied to nanostructure device fabrication.
基金Projects(51309089,11202063)supported by the National Natural Science Foundation of ChinaProject(2013BAB06B01)supported by the National High Technology Research and Development Program of China+1 种基金Project(2015CB057903)supported by the National Basic Research Program of ChinaProject(BK20130846)supported by Natural Science Foundation of Jiangsu Province,China
文摘For deposit body medium, the internal structural properties may be the controlling factors for the strength of the material and the mechanical response. Based on the results of soil-rock meso-statistics using digital imaging, a simulated annealing algorithm is adopted to expand the meso-structural features of deposit bodies in 3D. The construction of the 3D meso-structure of a deposit body is achieved, and then the particle flow analysis program PFC3 D is used to simulate the mechanical properties of the deposit body. It is shown that with a combination of the simulated annealing algorithm and the statistical feature functions, the randomness and heterogeneity of the rock distribution in the 3D inner structure of deposit body medium can be realized, and the reconstructed structural features of the deposit medium can match the features of the digital images well. The spatial utilizations and the compacting effects of the body-centered cubic, hexagonal close and face-centered packing models are high, so these structures can be applied in the simulations of the deposit structures. However, the shear features of the deposit medium vary depending on the different model constructive modes. Rocks, which are the backbone of the deposit, are the factors that determine the shear strength and deformation modulus of the deposit body. The modeling method proposed is useful for the construction of 3D meso-scope models from 2D meso-scope statistics and can be used for studying the mechanical properties of mixed media, such as deposit bodies.
