Pressure fluctuations contribute to the instability of separation process in air dense medium fluidized bed, which provides a high motivation for further study of underlying mechanisms. Reasons for generation and prop...Pressure fluctuations contribute to the instability of separation process in air dense medium fluidized bed, which provides a high motivation for further study of underlying mechanisms. Reasons for generation and propagation of pressure fluctuations in the air dense medium fluidized bed have been discussed.Drift rate and collision rate of particles were employed to deduce the correlation between voidage and pressure fluctuations. Simultaneously, a dynamic pressure fluctuation measuring and analysis system was established. Based on frequency domain analysis and wavelet analysis, collected signals were disassembled and analyzed. Results show gradually intensive motion of particles increases magnitudes of signal components with lower frequencies. As a result of violent particle motion, the magnitude of real pressure signal's frequency experienced an increase as air velocity increased moderately. Wavelet analysis keeps edge features of the real signal and eliminates the noise efficaciously. The frequency of denoised signal is closed to that of pressure signal identified in frequency domain analysis.展开更多
Bubble size distribution is the basic apparent performance and obvious characteristics in the air dense medium fluidized bed (ADMFB). The approaches of numerical simulation and experimental verification were combined ...Bubble size distribution is the basic apparent performance and obvious characteristics in the air dense medium fluidized bed (ADMFB). The approaches of numerical simulation and experimental verification were combined to conduct the further research on the bubble generation and movement behavior. The results show that ADMFB could display favorable expanded characteristics after steady fluidization. With different particle size distributions of magnetite powder as medium solids, we selected an appropriate prediction model for the mean bubble diameter in ADMFB. The comparison results indicate that the mean bubble diameters along the bed heights are 35 mm < D b < 66 mm and 40 mm < D b < 69 mm with the magnetite powder of 0.3 mm+0.15mm and 0.15mm+0.074mm, respectively. The prediction model provides good agreements with the experimental and simulation data. Based on the optimal operating gas velocity distribution, the mixture of magnetite powder and <1mm fine coal as medium solids were utilized to carry out the separation experiment on 6-50mm raw coal. The results show that an optimal separation density d P of 1.73g/cm 3 with a probable error E of 0.07g/cm 3 and a recovery efficiency of 99.97% is achieved, which indicates good separation performance by applying ADMFB.展开更多
In this paper, the authors point out that the Creativity is an inevitable request in solving engineering and technological problems and that the coal beneficiation technology with air dense medium fluidized bed is a r...In this paper, the authors point out that the Creativity is an inevitable request in solving engineering and technological problems and that the coal beneficiation technology with air dense medium fluidized bed is a result of reversal thinking, and its forming mechanism is the use of other things for reference and the transplantation.展开更多
China’s energy supply heavily relies on coal and China’s coal resource and water resource has a reverse distribution.The problem of water shortages restricts the applications of wet coal beneficiation technologies i...China’s energy supply heavily relies on coal and China’s coal resource and water resource has a reverse distribution.The problem of water shortages restricts the applications of wet coal beneficiation technologies in drought regions.The present situation highlights the significance and urgency of developing dry beneficiation technologies of coal.Besides,other countries that produce large amounts of coal also encounter serious problem of lack of water for coal beneficiation,such as American,Australia,Canada,South Africa,Turkey and India.Thus,dry coal beneficiation becomes the research hot-points in the field of coal cleaning worldwide in recent years.This paper systematically reviewed the promising research efforts on dry coal beneficiation reported in literature in last 5 years and discussed the progress in developments of dry coal beneficiation worldwide.Finally,we also elaborated the prospects and the challenges of the development of dry coal beneficiation.展开更多
The separation characteristic of raw coal from Luoyang mining area, China, was investigated by applying a dry coal beneficiation flowsheet with the dense medium gas-solid fluidized bed as main separating equipment. Th...The separation characteristic of raw coal from Luoyang mining area, China, was investigated by applying a dry coal beneficiation flowsheet with the dense medium gas-solid fluidized bed as main separating equipment. The experimental and simulation results indicate that the dense medium gas-solid fluidized bed can provide uniform distribution and stable fluctuation of bed densities at various heights. Two types of different separating approaches were compared using the dry coal beneficiation flowsheet. Compared with obtaining cleaning coal in the first stage of the flowsheet, a higher yield of the cleaning coal and better separation efficiency can be achieved when discharging gangue in the first stage. Finally, the results indicate that 64.86% pure cleaning coal with an ash content of 11.77% and 13.53% middlings were obtained, and 21.61% gangue was removed in two successive separation stages with the probable errors of 0.05 and 0.07 g/cm3, respectively.展开更多
The solids acceleration length was investigated in a cold dense transport bed （0.10 m-IDx17 m-height） with three kinds of Silica sand. The solids circulation rate （Gs） was up to 954 kg/（m2s）. The effects of oper...The solids acceleration length was investigated in a cold dense transport bed （0.10 m-IDx17 m-height） with three kinds of Silica sand. The solids circulation rate （Gs） was up to 954 kg/（m2s）. The effects of operating conditions, particle properties, and riser structures on the solids acceleration length were investigated under high Gs conditions, with the effect of riser height non-negligible. The solids acceleration length increased with the increase of the riser height. Based on the experimental data, an empirical correlation was proposed to predict the solids acceleration length. Predictions of the correlation were in good agreement with the experimental data in this work and those from the literature over a wide range of Gs （18~954 kg/（m2s））.展开更多
Liquid-solid binary fluidized beds are widely used in many industries. However, the flow behavior of such beds is not well understood due to the lack of accurate experimental and numerical data. In the current study, ...Liquid-solid binary fluidized beds are widely used in many industries. However, the flow behavior of such beds is not well understood due to the lack of accurate experimental and numerical data. In the current study, the behavior of monodisperse and binary liquid-solid fluidized beds of the same density but dif- ferent sizes is investigated using radioactive particle tracking （RPT） technique and a dense discrete phase model （DDPM）. Experiments and simulations are performed in monodisperse fluidized beds containing two different sizes of glass beads （0.6 and I mm） and a binary fluidized bed of the same particles for vari- ous bed compositions. The results show that both RPT and DDPM can predict the mixing and segregation pattern in liquid-solid binary fluidized beds. The mean velocity predictions of DDPM are in good agree- ment with the experimental findings for both monodisperse and binary fluidized beds. However, the axial root mean square velocity predictions are only reasonable for bigger particles. Particle-particle interac- tions are found to be critical for predicting the flow behavior of solids in liquid-solid binary fluidized beds.展开更多
We present an Euler-Lagrange method for the simulation of wood gasification in a bubbling fluidized bed. The gas phase is modeled as a continuum using the 2D Navier-Stokes equations and the solid phase is modeled by a...We present an Euler-Lagrange method for the simulation of wood gasification in a bubbling fluidized bed. The gas phase is modeled as a continuum using the 2D Navier-Stokes equations and the solid phase is modeled by a Discrete Element Method （DEM） using a soft-sphere approach for the particle collision dynamic. Turbulence is included via a Large-Eddy approach using the Smagorinsky sub-grid model. The model takes into account detailed gas phase chemistry, zero-dimensional modeling of the pyrolysis and gasification of each individual particle, particle shrinkage, and heat and mass transfer between the gas phase and the particulate phase. We investigate the influence of wood feeding rate and compare exhaust gas compositions and temperature results obtained with the model against experimental data of a laboratory scale bubbling fiuidized bed reactor.展开更多
We carried out experiments to explore and characterize the gas-solid flow dynamics of Geldart group B particles in a dense circulating fluidized bed riser. By reducing the pressure drop across the solid control valve ...We carried out experiments to explore and characterize the gas-solid flow dynamics of Geldart group B particles in a dense circulating fluidized bed riser. By reducing the pressure drop across the solid control valve and increasing the solid inventory in the storage tank, a high solid circulation rate and a solid holdup above 0.075 throughout the riser were simultaneously achieved. At a solid-to-gas mass flux ratio of approximately 105, flow transitioned from fast fluidization to a dense suspension upflow. In the axial direction of the riser, solid holdup had an exponential profile, increasing with increasing solid circulation rate and Jot decreasing superficial gas velocity. From the riser＇s center to its wall, the solid holdup increased markedly, exhibiting a steep parabolic profile. Increasing the solid circulation rate increased the radial non-uniformity of the solid concentration, while increasing the superficial gas velocity had the opposite effect, In our dense circulating fluidized bed riser, Geldart group B particles had similar slip characteristics to Geldart group A particles,展开更多
基金support by the Natural Science Foundation of Jiangsu Province of China (No. BK20160266)the National Natural Science Foundation of China (Nos. 51704287 and U1508210)the Priority Academic Program Development of Jiangsu Higher Education Institutions of China
文摘Pressure fluctuations contribute to the instability of separation process in air dense medium fluidized bed, which provides a high motivation for further study of underlying mechanisms. Reasons for generation and propagation of pressure fluctuations in the air dense medium fluidized bed have been discussed.Drift rate and collision rate of particles were employed to deduce the correlation between voidage and pressure fluctuations. Simultaneously, a dynamic pressure fluctuation measuring and analysis system was established. Based on frequency domain analysis and wavelet analysis, collected signals were disassembled and analyzed. Results show gradually intensive motion of particles increases magnitudes of signal components with lower frequencies. As a result of violent particle motion, the magnitude of real pressure signal's frequency experienced an increase as air velocity increased moderately. Wavelet analysis keeps edge features of the real signal and eliminates the noise efficaciously. The frequency of denoised signal is closed to that of pressure signal identified in frequency domain analysis.
基金financially supported by the National Natural Science Foundation of China (Nos. 51221462, 51134022,51174203 and 51074156)the National Basic Research Program of China (No. 2012CB214904)China Postdoctoral Science Foundation (No. 2013M531430)
文摘Bubble size distribution is the basic apparent performance and obvious characteristics in the air dense medium fluidized bed (ADMFB). The approaches of numerical simulation and experimental verification were combined to conduct the further research on the bubble generation and movement behavior. The results show that ADMFB could display favorable expanded characteristics after steady fluidization. With different particle size distributions of magnetite powder as medium solids, we selected an appropriate prediction model for the mean bubble diameter in ADMFB. The comparison results indicate that the mean bubble diameters along the bed heights are 35 mm < D b < 66 mm and 40 mm < D b < 69 mm with the magnetite powder of 0.3 mm+0.15mm and 0.15mm+0.074mm, respectively. The prediction model provides good agreements with the experimental and simulation data. Based on the optimal operating gas velocity distribution, the mixture of magnetite powder and <1mm fine coal as medium solids were utilized to carry out the separation experiment on 6-50mm raw coal. The results show that an optimal separation density d P of 1.73g/cm 3 with a probable error E of 0.07g/cm 3 and a recovery efficiency of 99.97% is achieved, which indicates good separation performance by applying ADMFB.
文摘In this paper, the authors point out that the Creativity is an inevitable request in solving engineering and technological problems and that the coal beneficiation technology with air dense medium fluidized bed is a result of reversal thinking, and its forming mechanism is the use of other things for reference and the transplantation.
基金The study is supported by the National Key Basic Research Program of China(2012CB214904)the National Natural Science Foundation of China(51221462,51134022,51174203)+1 种基金the Research Fund for the Doctoral Program of Higher Education(20120095130001)the Natural Science Foundation of Jiangsu Province(BK20140209).
文摘China’s energy supply heavily relies on coal and China’s coal resource and water resource has a reverse distribution.The problem of water shortages restricts the applications of wet coal beneficiation technologies in drought regions.The present situation highlights the significance and urgency of developing dry beneficiation technologies of coal.Besides,other countries that produce large amounts of coal also encounter serious problem of lack of water for coal beneficiation,such as American,Australia,Canada,South Africa,Turkey and India.Thus,dry coal beneficiation becomes the research hot-points in the field of coal cleaning worldwide in recent years.This paper systematically reviewed the promising research efforts on dry coal beneficiation reported in literature in last 5 years and discussed the progress in developments of dry coal beneficiation worldwide.Finally,we also elaborated the prospects and the challenges of the development of dry coal beneficiation.
基金Projects(51221462)supported by the National Natural Science Foundation of ChinaProject(2014QNA28)supported by the Fundamental Research Funds for the Central Universities,China
文摘The separation characteristic of raw coal from Luoyang mining area, China, was investigated by applying a dry coal beneficiation flowsheet with the dense medium gas-solid fluidized bed as main separating equipment. The experimental and simulation results indicate that the dense medium gas-solid fluidized bed can provide uniform distribution and stable fluctuation of bed densities at various heights. Two types of different separating approaches were compared using the dry coal beneficiation flowsheet. Compared with obtaining cleaning coal in the first stage of the flowsheet, a higher yield of the cleaning coal and better separation efficiency can be achieved when discharging gangue in the first stage. Finally, the results indicate that 64.86% pure cleaning coal with an ash content of 11.77% and 13.53% middlings were obtained, and 21.61% gangue was removed in two successive separation stages with the probable errors of 0.05 and 0.07 g/cm3, respectively.
基金the financial support of National High-tech Research and Development Program of China (863 Program) (No. 2006AA05A103)that of Main Direction Program of Knowledge Innovation of Chinese Academy of Sciences (No. KGCX2-YW-348)
文摘The solids acceleration length was investigated in a cold dense transport bed （0.10 m-IDx17 m-height） with three kinds of Silica sand. The solids circulation rate （Gs） was up to 954 kg/（m2s）. The effects of operating conditions, particle properties, and riser structures on the solids acceleration length were investigated under high Gs conditions, with the effect of riser height non-negligible. The solids acceleration length increased with the increase of the riser height. Based on the experimental data, an empirical correlation was proposed to predict the solids acceleration length. Predictions of the correlation were in good agreement with the experimental data in this work and those from the literature over a wide range of Gs （18~954 kg/（m2s））.
文摘Liquid-solid binary fluidized beds are widely used in many industries. However, the flow behavior of such beds is not well understood due to the lack of accurate experimental and numerical data. In the current study, the behavior of monodisperse and binary liquid-solid fluidized beds of the same density but dif- ferent sizes is investigated using radioactive particle tracking （RPT） technique and a dense discrete phase model （DDPM）. Experiments and simulations are performed in monodisperse fluidized beds containing two different sizes of glass beads （0.6 and I mm） and a binary fluidized bed of the same particles for vari- ous bed compositions. The results show that both RPT and DDPM can predict the mixing and segregation pattern in liquid-solid binary fluidized beds. The mean velocity predictions of DDPM are in good agree- ment with the experimental findings for both monodisperse and binary fluidized beds. However, the axial root mean square velocity predictions are only reasonable for bigger particles. Particle-particle interac- tions are found to be critical for predicting the flow behavior of solids in liquid-solid binary fluidized beds.
文摘We present an Euler-Lagrange method for the simulation of wood gasification in a bubbling fluidized bed. The gas phase is modeled as a continuum using the 2D Navier-Stokes equations and the solid phase is modeled by a Discrete Element Method （DEM） using a soft-sphere approach for the particle collision dynamic. Turbulence is included via a Large-Eddy approach using the Smagorinsky sub-grid model. The model takes into account detailed gas phase chemistry, zero-dimensional modeling of the pyrolysis and gasification of each individual particle, particle shrinkage, and heat and mass transfer between the gas phase and the particulate phase. We investigate the influence of wood feeding rate and compare exhaust gas compositions and temperature results obtained with the model against experimental data of a laboratory scale bubbling fiuidized bed reactor.
基金We acknowledge support from the National High Technology Research and Development Program of China （2012AA06A115）, National Natural Science Foundation of China （51476058, 91434120）, and Fundamental Research Funds for the Central Universities （2014MS13）.
文摘We carried out experiments to explore and characterize the gas-solid flow dynamics of Geldart group B particles in a dense circulating fluidized bed riser. By reducing the pressure drop across the solid control valve and increasing the solid inventory in the storage tank, a high solid circulation rate and a solid holdup above 0.075 throughout the riser were simultaneously achieved. At a solid-to-gas mass flux ratio of approximately 105, flow transitioned from fast fluidization to a dense suspension upflow. In the axial direction of the riser, solid holdup had an exponential profile, increasing with increasing solid circulation rate and Jot decreasing superficial gas velocity. From the riser＇s center to its wall, the solid holdup increased markedly, exhibiting a steep parabolic profile. Increasing the solid circulation rate increased the radial non-uniformity of the solid concentration, while increasing the superficial gas velocity had the opposite effect, In our dense circulating fluidized bed riser, Geldart group B particles had similar slip characteristics to Geldart group A particles,
