A discrimination measurement method and demodulation technique for fiber Bragg grating (FBG) sensors were presented using digital filtering technique. The system can control a tunable fiber Fabry-Perot filter with saw...A discrimination measurement method and demodulation technique for fiber Bragg grating (FBG) sensors were presented using digital filtering technique. The system can control a tunable fiber Fabry-Perot filter with sawtooth wave voltage generated by digital clock to interrogate FBG sensors. Using the analogue digital converter (ADC), the reflected FBG signals were sampled with synchronous digital clock. With the aid of digital matched filtering technique, the sampled FBG signals were processed to obtain the maximum signal-to-noise ratio (SNR) and the Bragg wavelength shift from the FBG signals was recovered. The results demonstrate that this system has a scanning range of 1 520 nm-1 575 nm,and the wavelength detection accuracy is less than 2 pm with 1.5 Hz scanning frequency.展开更多
We present an all-digital demodulation system of interferometric fiber optic sensor based on an improved arctangent-differential-self-multiplying(arctan-DSM)algorithm.The total harmonic distortion(THD)and the light in...We present an all-digital demodulation system of interferometric fiber optic sensor based on an improved arctangent-differential-self-multiplying(arctan-DSM)algorithm.The total harmonic distortion(THD)and the light intensity disturbance(LID)are also suppressed,the same as those in the traditional arctan-DSM algorithm.Moreover,the lowest sampling frequency is also reduced by introducing anti-aliasing filter,so the occupation of the system memory is reduced.The simulations show that the improved algorithm can correctly demodulate cosine signal and chirp signal with lower sampling frequency.展开更多
For the modified demodulation arithmetic of 3×3 coupler, the processing software built on the basis of Labview is able to demodulate asymmetric 3×3 coupler signal and do further spectrum analysis. It shows t...For the modified demodulation arithmetic of 3×3 coupler, the processing software built on the basis of Labview is able to demodulate asymmetric 3×3 coupler signal and do further spectrum analysis. It shows that the measured frequency ranges from 10 Hz to 1 000 Hz and phase range is covered by -10 rad^10 rad. The phase sensitivity is 0.5 V/rad. This system is proved to show high resolution and wide dynamic range.展开更多
The mechanism of measuring temperature and strain using FBG has been studied deeply, however , signal demodulation has not been thoroughly solved. A novel demodulation system using CCD and a temperature sensing system...The mechanism of measuring temperature and strain using FBG has been studied deeply, however , signal demodulation has not been thoroughly solved. A novel demodulation system using CCD and a temperature sensing system are designed.展开更多
A multi-channel synchronous demodulation system of a polarized low-coherence interferometer(PLCI)based on a matrix charge-coupled-device(CCD)is proposed and demonstrated.By using special designs,the system allows the ...A multi-channel synchronous demodulation system of a polarized low-coherence interferometer(PLCI)based on a matrix charge-coupled-device(CCD)is proposed and demonstrated.By using special designs,the system allows the signals from different channels to be received and demodulated synchronously.Multichannel air pressure experiments were implemented to verify the effectiveness of the proposed system.The experiment results showed that the Fabry–Perot(F–P)sensors could be demodulated synchronously with a high tolerance for light sources and sensors,which indicated that any sensor and light source that can be demodulated by PLCI were allowed to be employed,leading to a wide application in the field of multichannel synchronous measurement.展开更多
Aiming at the potential presence of mixing automatic identification system(AIS) signals,a new demodulation scheme was proposed for separating other interfering signals in satellite systems.The combined iterative cross...Aiming at the potential presence of mixing automatic identification system(AIS) signals,a new demodulation scheme was proposed for separating other interfering signals in satellite systems.The combined iterative cross-correlation demodulation scheme,referred to as CICCD,yielded a set of single short signals based on the prior information of AIS,after the frequency,code rate and modulation index were estimated.It demodulates the corresponding short codes according to the maximum peak of cross-correlation,which is simple and easy to implement.Numerical simulations show that the bit error rate of proposed algorithm improves by about 40% compared with existing ones,and about 3 dB beyond the standard AIS receiver.In addition,the proposed demodulation scheme shows the satisfying performance and engineering value in mixing AIS environment and can also perform well in low signal-to-noise conditions.展开更多
In order to grasp the downhole situation immediately, logging while drilling(LWD) technology is adopted. One of the LWD technologies, called acoustic telemetry, can be successfully applied to modern drilling. It is cr...In order to grasp the downhole situation immediately, logging while drilling(LWD) technology is adopted. One of the LWD technologies, called acoustic telemetry, can be successfully applied to modern drilling. It is critical for acoustic telemetry technology that the signal is successfully transmitted to the ground. In this paper, binary phase shift keying(BPSK) is used to modulate carrier waves for the transmission and a new BPSK demodulation scheme based on Duffing chaos is investigated. Firstly, a high-order system is given in order to enhance the signal detection capability and it is realized through building a virtual circuit using an electronic workbench(EWB). Secondly, a new BPSK demodulation scheme is proposed based on the intermittent chaos phenomena of the new Duffing system. Finally, a system variable crossing zero-point equidistance method is proposed to obtain the phase difference between the system and the BPSK signal. Then it is determined that the digital signal transmitted from the bottom of the well is ‘0’ or ‘1’. The simulation results show that the demodulation method is feasible.展开更多
The demodulation and decoding solution commonly used in the bit interleaving code modulation and the LDPC coded demodulation and decoding system of the iterative decoding （BICM-ID） is to report the soft information ...The demodulation and decoding solution commonly used in the bit interleaving code modulation and the LDPC coded demodulation and decoding system of the iterative decoding （BICM-ID） is to report the soft information output from the decoder of the receiver to the demodulator as priori information for completing the decoding. However, this will give rise to the reduction of the minimum Euclidean distances between codes, so that the performances of the system decline under non-fading Gaussian channel. According to this problem, an optimized iterative demodulation decoding solution is proposed and also is analyzed using simulation. The result shows that this solution can improve the demodulation and decoding performances of LDPC coded modulation and demodulation system.展开更多
Aiming at the problem that the bit error rate(BER)of asymmetrically clipped optical orthogonal frequency division multiplexing(ACO-OFDM)space optical communication system is significantly affected by different turbule...Aiming at the problem that the bit error rate(BER)of asymmetrically clipped optical orthogonal frequency division multiplexing(ACO-OFDM)space optical communication system is significantly affected by different turbulence intensities,the deep learning technique is proposed to the polarization code decoding in ACO-OFDM space optical communication system.Moreover,this system realizes the polarization code decoding and signal demodulation without frequency conduction with superior performance and robustness compared with the performance of traditional decoder.Simulations under different turbulence intensities as well as different mapping orders show that the convolutional neural network(CNN)decoder trained under weak-medium-strong turbulence atmospheric channels achieves a performance improvement of about 10^(2)compared to the conventional decoder at 4-quadrature amplitude modulation(4QAM),and the BERs for both 16QAM and 64QAM are in between those of the conventional decoder.展开更多
Recently, the rapid progress of quantum sensing research reveals that Rydberg atoms have great potential in becoming high-precision centimeter-scale antennas for low-frequency fields. In order to facilitate efficient ...Recently, the rapid progress of quantum sensing research reveals that Rydberg atoms have great potential in becoming high-precision centimeter-scale antennas for low-frequency fields. In order to facilitate efficient and reliable detection of low-frequency fields via Rydberg atoms, we designed and implemented a heterodyne method based on the linear response to external signals under the condition of Rydberg electromagnetically induced transparency(EIT). Instead of relying on observing changes in the absorption of light by Rydberg atoms, our method focuses on the phase modulation effect on the probe laser induced by low-frequency fields via the Rydberg EIT mechanism and utilizes a special demodulation process to accurately retrieve signals including both amplitude and phase. The general principles of our method apply to both electric and magnetic fields, and it is even possible to realize a combination of both functionalities in the same apparatus. In particular, we experimentally demonstrate the full cycle of operations with respect to both cases. In measuring low-frequency electric fields,we discover that the Rydberg dipole–dipole interaction among atoms induces a linear superposition of Rydberg states with different angular momentum, generating a first-order response corresponding to the signature of the linear Stark effect. As Rydberg atoms have excellent coupling strengths with electric fields, our results indicate that our method can hopefully achieve high-precision performance for practical tasks in the future.展开更多
Partial discharge(PD)is the indicator of the insulation defect in cables.However,the pulse current method,which is widely adopted in land cables,cannot obtain PD signals of high-voltage direct current(HVDC)submarine c...Partial discharge(PD)is the indicator of the insulation defect in cables.However,the pulse current method,which is widely adopted in land cables,cannot obtain PD signals of high-voltage direct current(HVDC)submarine cables due to attenuation and installation position.To detect the PD of the HVDC submarine cable,a PD vibration diagnosis methodology using the embedded fibre based on the heterodyne interferometric phase-sensitive optical time-domain reflectometry(φ-OTDR)and Hilbert demodulation is proposed.The proposed method is verified by a PD experiment with preset defects in 220 kV submarine cables under DC voltage.The results show that the PD can be detected by fibre using the proposed method.Among the three types of PD generated in preset defects in 220 kV submarine cables under DC voltage,the inception voltage of corona discharge,internal airgap discharge and surface discharge is 18,14 and 14 kV,respectively.The peak value of the phase difference in corona discharge is the smallest,and the peak value of the phase difference in surface discharge is close to that in internal airgap discharge.A recommended parameter configuration is provided through statistical analysis,where a modulation frequency of 10 kHz and a pulse width of 100 ns achieve a 10%detection probability at 2.25 km fibre length and 10 m spatial resolution.展开更多
The principle of optical time-domain reflection localization limits the sensing spatial resolution of Raman distributed optical fiber sensing.We provide a solution for a Raman distributed optical fiber sensing system ...The principle of optical time-domain reflection localization limits the sensing spatial resolution of Raman distributed optical fiber sensing.We provide a solution for a Raman distributed optical fiber sensing system with kilometer-level sensing distance and submeter spatial resolution.Based on this,we propose a Raman distributed optical fiber sensing scheme based on chaotic pulse cluster demodulation.Chaotic pulse clusters are used as the probe signal,in preference to conventional pulsed or chaotic single-pulse lasers.Furthermore,the accurate positioning of the temperature variety region along the sensing fiber can be realized using chaotic pulse clusters.The proposed demodulation scheme can enhance the signal-to-noise ratio by improving the correlation between the chaotic reference and the chaotic Raman anti-Stokes scattering signals.The experiment achieved a sensing spatial resolution of 30 cm at a distributed temperature-sensing distance of∼6.0 km.Furthermore,we explored the influence of chaotic pulse width and detector bandwidth on the sensing spatial resolution.In addition,the theoretical experiments proved that the sensing spatial resolution in the proposed scheme was independent of the pulse width and sensing distance.展开更多
A hardwale demodulation method for 2-D edge detection is proposed. The filtering step and the differential step are implemented by using the hardware circuit. This demodulation circuit simplifies the edgefinder and re...A hardwale demodulation method for 2-D edge detection is proposed. The filtering step and the differential step are implemented by using the hardware circuit. This demodulation circuit simplifies the edgefinder and reduces the measuring cycle. The calibration method of scale setting is also presented,and bymeasuring some calibrated objects,the demodulation errors and the error correction table is obtained.展开更多
The harmonic wavelet transform(HWT)and its fast realization based on fast Fourier transform(FFT)are introduced.Its ability to maintain the same amplitude-frequency feature is revealed.A new method to construct the tim...The harmonic wavelet transform(HWT)and its fast realization based on fast Fourier transform(FFT)are introduced.Its ability to maintain the same amplitude-frequency feature is revealed.A new method to construct the time-frequency(TF)spectrum of HWT is proposed,which makes the HWT TF spectrum able to correctly reflect the time-frequency-amplitude distribution of the signal.A new way to calculate the HWT coefficients is proposed.By zero padding the data taken out,the non-decimated coefficients of HWT are obtained.Theoretical analysis shows that the modulus of the coefficients obtained by the new calculation way and living at a certain scale are the envelope of the component in the corresponding frequency band.By taking the cross section of the new TF spectrum,the demodulation for the component at a certain frequency band can be realized.A comparison with the Hilbert demodulation combined with band-pass filtering is done,which indicates for multi-components,the method proposed here is more suitable since it realizes ideal band-pass filtering and avoids pass band selecting.In the end,it is applied to bearing and gearbox fault diagnosis,and the results reflect that it can effectively extract the fault features in the signal.展开更多
To increase the storage capacity in holographic data storage(HDS),the information to be stored is encoded into a complex amplitude.Fast and accurate retrieval of amplitude and phase from the reconstructed beam is nece...To increase the storage capacity in holographic data storage(HDS),the information to be stored is encoded into a complex amplitude.Fast and accurate retrieval of amplitude and phase from the reconstructed beam is necessary during data readout in HDS.In this study,we proposed a complex amplitude demodulation method based on deep learning from a single-shot diffraction intensity image and verified it by a non-interferometric lensless experiment demodulating four-level amplitude and four-level phase.By analyzing the correlation between the diffraction intensity features and the amplitude and phase encoding data pages,the inverse problem was decomposed into two backward operators denoted by two convolutional neural networks(CNNs)to demodulate amplitude and phase respectively.The experimental system is simple,stable,and robust,and it only needs a single diffraction image to realize the direct demodulation of both amplitude and phase.To our investigation,this is the first time in HDS that multilevel complex amplitude demodulation is achieved experimentally from one diffraction intensity image without iterations.展开更多
It is a challenging issue to detect bearing fault under nonstationary conditions and gear noise interferences. Meanwhile, the application of the traditional methods is limited by their deficiencies in the aspect of co...It is a challenging issue to detect bearing fault under nonstationary conditions and gear noise interferences. Meanwhile, the application of the traditional methods is limited by their deficiencies in the aspect of computational accuracy and e ciency, or dependence on the tachometer. Hence, a new fault diagnosis strategy is proposed to remove gear interferences and spectrum smearing phenomenon without the tachometer and angular resampling technique. In this method, the instantaneous dominant meshing multiple(IDMM) is firstly extracted from the time-frequency representation(TFR) of the raw signal, which can be used to calculate the phase functions(PF) and the frequency points(FP). Next, the resonance frequency band excited by the faulty bearing is obtained by the band-pass filter. Furthermore, based on the PFs, the generalized demodulation transform(GDT) is applied to the envelope of the filtered signal. Finally, the target bearing is diagnosed by matching the peaks in the spectra of demodulated signals with the theoretical FPs. The analysis results of simulated and experimental signal demonstrate that the proposed method is an e ective and reliable tool for bearing fault diagnosis without the tachometer and the angular resampling.展开更多
Condition monitoring and fault diagnosis of gearboxes play an important role in the maintenance of mechanical systems.The vibration signal of gearboxes is characterized by complex spectral structure and strong time va...Condition monitoring and fault diagnosis of gearboxes play an important role in the maintenance of mechanical systems.The vibration signal of gearboxes is characterized by complex spectral structure and strong time variability,which brings challenges to fault feature extraction.To address this issue,a new demodulation technique,based on the Fourier decomposition method and resonance demodulation,is proposed to extract fault-related information.First,the Fourier decomposition method decomposes the vibration signal into Fourier intrinsic band functions(FIBFs)adaptively in the frequency domain.Then,the original signal is segmented into short-time vectors to construct double-row matrices and the maximum singular value ratio method is employed to estimate the resonance frequency.Then,the resonance frequency is used as a criterion to guide the selection of the most relevant FIBF for demodulation analysis.Finally,for the optimal FIBF,envelope demodulation is conducted to identify the fault characteristic frequency.The main contributions are that the proposed method describes how to obtain the resonance frequency effectively and how to select the optimal FIBF after decomposition in order to extract the fault characteristic frequency.Both numerical and experimental studies are conducted to investigate the performance of the proposed method.It is demonstrated that the proposed method can effectively demodulate the fault information from the original signal.展开更多
Although envelope spectrum does not involve complicated sideband,thus has a much simpler structure than the common Fourier spectrum,it is still subject to the efect of planets passing or time variant vibration transfe...Although envelope spectrum does not involve complicated sideband,thus has a much simpler structure than the common Fourier spectrum,it is still subject to the efect of planets passing or time variant vibration transfer pams.The presence of planets passing frequency,sun gear rotating frequency,or planet carrier rotating frequency in the envelope spectrum may confuse the analysis in fault diagnosis.Therefore,it is important to look for an approach to remove the interferences caused by the efect of planets passing or time variant vibration transfer paths.展开更多
ERT(electrical resistance tomography) is effective method for visualization of multiphase flows,offering some advantages of rapid response and low cost,so as to explore the transient hydrodynamics.Aiming at this targe...ERT(electrical resistance tomography) is effective method for visualization of multiphase flows,offering some advantages of rapid response and low cost,so as to explore the transient hydrodynamics.Aiming at this target,a fully programmable and reconfigurable FPGA(field programmable gate array)-based Compact PCI(peripheral component interconnect) bus linked sixteen-channel ERT system has been presented.The data acquisition system is carefully designed with function modules of signal generator module;Compact PCI transmission module and data processing module(including data sampling,filtering and demodulating).The processing module incorporates a powerful FPGA with Compact PCI bus for communication,and the measurement process management is conducted in FPGA.Image reconstruction algorithms with different speed and accuracy are also coded for this system.The system has been demonstrated in real time(1400 frames per second for 50 kHz excitation) with signal-noise-ratio above 62 dB and repeatability error below 0.7%.Static experiments have been conducted and the images manifested good resolution relative to the actual object distribution.The parallel ERT system has provided alternative experimental platform for the multiphase flow measurements by the dynamic experiments in terms of concentration and velocity.展开更多
A program of adaptive quadrature demodulation is proposed to supply the gaps in the traditional analog detection technology of a silicon micro-machined gyroscope (SMG). This program is suitable for digital phase locke...A program of adaptive quadrature demodulation is proposed to supply the gaps in the traditional analog detection technology of a silicon micro-machined gyroscope (SMG). This program is suitable for digital phase locked loop (DPLL) drive technology that proposed in other papers. In addition the program adopts an adaptive filtering algorithm, which selects the in-phase and quadrature components that are outputs of the DPLL of the SMG's drive mode as reference signals to update the amplitude of the in-phase and quadrature components of the input signal by iteratively. An objective of the program is to minimize the mean square error of the accurate amplitudes and the estimated amplitudes of SMG's detection mode. The simulation and test results prove the feasibility of the program that lays the foundation for the further improvement of the SMG's system performance and the implementation of the SMG system's self-calibration and self-demarcation in future.展开更多
基金Doctoral Foundation of Ministry of Education of China (No. 20040056008)
文摘A discrimination measurement method and demodulation technique for fiber Bragg grating (FBG) sensors were presented using digital filtering technique. The system can control a tunable fiber Fabry-Perot filter with sawtooth wave voltage generated by digital clock to interrogate FBG sensors. Using the analogue digital converter (ADC), the reflected FBG signals were sampled with synchronous digital clock. With the aid of digital matched filtering technique, the sampled FBG signals were processed to obtain the maximum signal-to-noise ratio (SNR) and the Bragg wavelength shift from the FBG signals was recovered. The results demonstrate that this system has a scanning range of 1 520 nm-1 575 nm,and the wavelength detection accuracy is less than 2 pm with 1.5 Hz scanning frequency.
文摘We present an all-digital demodulation system of interferometric fiber optic sensor based on an improved arctangent-differential-self-multiplying(arctan-DSM)algorithm.The total harmonic distortion(THD)and the light intensity disturbance(LID)are also suppressed,the same as those in the traditional arctan-DSM algorithm.Moreover,the lowest sampling frequency is also reduced by introducing anti-aliasing filter,so the occupation of the system memory is reduced.The simulations show that the improved algorithm can correctly demodulate cosine signal and chirp signal with lower sampling frequency.
文摘For the modified demodulation arithmetic of 3×3 coupler, the processing software built on the basis of Labview is able to demodulate asymmetric 3×3 coupler signal and do further spectrum analysis. It shows that the measured frequency ranges from 10 Hz to 1 000 Hz and phase range is covered by -10 rad^10 rad. The phase sensitivity is 0.5 V/rad. This system is proved to show high resolution and wide dynamic range.
文摘The mechanism of measuring temperature and strain using FBG has been studied deeply, however , signal demodulation has not been thoroughly solved. A novel demodulation system using CCD and a temperature sensing system are designed.
基金supported by the National Natural Science Foundation of China(Nos.61735011,61675152 and 61505139)National Instrumentation Program of China(No.2013YQ030915)China Postdoctoral Science Foundation(No.2016M590200)
文摘A multi-channel synchronous demodulation system of a polarized low-coherence interferometer(PLCI)based on a matrix charge-coupled-device(CCD)is proposed and demonstrated.By using special designs,the system allows the signals from different channels to be received and demodulated synchronously.Multichannel air pressure experiments were implemented to verify the effectiveness of the proposed system.The experiment results showed that the Fabry–Perot(F–P)sensors could be demodulated synchronously with a high tolerance for light sources and sensors,which indicated that any sensor and light source that can be demodulated by PLCI were allowed to be employed,leading to a wide application in the field of multichannel synchronous measurement.
基金Project(9140C860304) supported by the National Defense Key Laboratory Foundation of China
文摘Aiming at the potential presence of mixing automatic identification system(AIS) signals,a new demodulation scheme was proposed for separating other interfering signals in satellite systems.The combined iterative cross-correlation demodulation scheme,referred to as CICCD,yielded a set of single short signals based on the prior information of AIS,after the frequency,code rate and modulation index were estimated.It demodulates the corresponding short codes according to the maximum peak of cross-correlation,which is simple and easy to implement.Numerical simulations show that the bit error rate of proposed algorithm improves by about 40% compared with existing ones,and about 3 dB beyond the standard AIS receiver.In addition,the proposed demodulation scheme shows the satisfying performance and engineering value in mixing AIS environment and can also perform well in low signal-to-noise conditions.
基金supported by the National Natural Science Foundation of China(Grant No.51177117)the National Key Science&Technology Special Projects,China(Grant No.2011ZX05021-005)
文摘In order to grasp the downhole situation immediately, logging while drilling(LWD) technology is adopted. One of the LWD technologies, called acoustic telemetry, can be successfully applied to modern drilling. It is critical for acoustic telemetry technology that the signal is successfully transmitted to the ground. In this paper, binary phase shift keying(BPSK) is used to modulate carrier waves for the transmission and a new BPSK demodulation scheme based on Duffing chaos is investigated. Firstly, a high-order system is given in order to enhance the signal detection capability and it is realized through building a virtual circuit using an electronic workbench(EWB). Secondly, a new BPSK demodulation scheme is proposed based on the intermittent chaos phenomena of the new Duffing system. Finally, a system variable crossing zero-point equidistance method is proposed to obtain the phase difference between the system and the BPSK signal. Then it is determined that the digital signal transmitted from the bottom of the well is ‘0’ or ‘1’. The simulation results show that the demodulation method is feasible.
文摘The demodulation and decoding solution commonly used in the bit interleaving code modulation and the LDPC coded demodulation and decoding system of the iterative decoding （BICM-ID） is to report the soft information output from the decoder of the receiver to the demodulator as priori information for completing the decoding. However, this will give rise to the reduction of the minimum Euclidean distances between codes, so that the performances of the system decline under non-fading Gaussian channel. According to this problem, an optimized iterative demodulation decoding solution is proposed and also is analyzed using simulation. The result shows that this solution can improve the demodulation and decoding performances of LDPC coded modulation and demodulation system.
基金supported by the National Natural Science Foundation of China(No.12104141).
文摘Aiming at the problem that the bit error rate(BER)of asymmetrically clipped optical orthogonal frequency division multiplexing(ACO-OFDM)space optical communication system is significantly affected by different turbulence intensities,the deep learning technique is proposed to the polarization code decoding in ACO-OFDM space optical communication system.Moreover,this system realizes the polarization code decoding and signal demodulation without frequency conduction with superior performance and robustness compared with the performance of traditional decoder.Simulations under different turbulence intensities as well as different mapping orders show that the convolutional neural network(CNN)decoder trained under weak-medium-strong turbulence atmospheric channels achieves a performance improvement of about 10^(2)compared to the conventional decoder at 4-quadrature amplitude modulation(4QAM),and the BERs for both 16QAM and 64QAM are in between those of the conventional decoder.
基金supported by the Science and Technology Commission of Shanghai Municipality (Grant No.24DP2600202)the National Key R&D Program of China (Grant No.2024YFB4504002)+2 种基金Industrial Technology Development Research Program of Shanghai Institute of Optics and Fine Mechanicsthe National Natural Science Foundation of China (Grant No.92165107)the China Postdoctoral Science Foundation (Grant Nos.2024M753359 for S.J.and2022M723270 for X.W.)。
文摘Recently, the rapid progress of quantum sensing research reveals that Rydberg atoms have great potential in becoming high-precision centimeter-scale antennas for low-frequency fields. In order to facilitate efficient and reliable detection of low-frequency fields via Rydberg atoms, we designed and implemented a heterodyne method based on the linear response to external signals under the condition of Rydberg electromagnetically induced transparency(EIT). Instead of relying on observing changes in the absorption of light by Rydberg atoms, our method focuses on the phase modulation effect on the probe laser induced by low-frequency fields via the Rydberg EIT mechanism and utilizes a special demodulation process to accurately retrieve signals including both amplitude and phase. The general principles of our method apply to both electric and magnetic fields, and it is even possible to realize a combination of both functionalities in the same apparatus. In particular, we experimentally demonstrate the full cycle of operations with respect to both cases. In measuring low-frequency electric fields,we discover that the Rydberg dipole–dipole interaction among atoms induces a linear superposition of Rydberg states with different angular momentum, generating a first-order response corresponding to the signature of the linear Stark effect. As Rydberg atoms have excellent coupling strengths with electric fields, our results indicate that our method can hopefully achieve high-precision performance for practical tasks in the future.
基金the National Natural Science Foundation of China(Grants.52437007,52550007 and 52277167).
文摘Partial discharge(PD)is the indicator of the insulation defect in cables.However,the pulse current method,which is widely adopted in land cables,cannot obtain PD signals of high-voltage direct current(HVDC)submarine cables due to attenuation and installation position.To detect the PD of the HVDC submarine cable,a PD vibration diagnosis methodology using the embedded fibre based on the heterodyne interferometric phase-sensitive optical time-domain reflectometry(φ-OTDR)and Hilbert demodulation is proposed.The proposed method is verified by a PD experiment with preset defects in 220 kV submarine cables under DC voltage.The results show that the PD can be detected by fibre using the proposed method.Among the three types of PD generated in preset defects in 220 kV submarine cables under DC voltage,the inception voltage of corona discharge,internal airgap discharge and surface discharge is 18,14 and 14 kV,respectively.The peak value of the phase difference in corona discharge is the smallest,and the peak value of the phase difference in surface discharge is close to that in internal airgap discharge.A recommended parameter configuration is provided through statistical analysis,where a modulation frequency of 10 kHz and a pulse width of 100 ns achieve a 10%detection probability at 2.25 km fibre length and 10 m spatial resolution.
基金supported by the National Natural Science Foundation of China(Grant Nos.U23A20375 and 62075151)the National Key Research and Development Program of China(Grant No.202103021223042).
文摘The principle of optical time-domain reflection localization limits the sensing spatial resolution of Raman distributed optical fiber sensing.We provide a solution for a Raman distributed optical fiber sensing system with kilometer-level sensing distance and submeter spatial resolution.Based on this,we propose a Raman distributed optical fiber sensing scheme based on chaotic pulse cluster demodulation.Chaotic pulse clusters are used as the probe signal,in preference to conventional pulsed or chaotic single-pulse lasers.Furthermore,the accurate positioning of the temperature variety region along the sensing fiber can be realized using chaotic pulse clusters.The proposed demodulation scheme can enhance the signal-to-noise ratio by improving the correlation between the chaotic reference and the chaotic Raman anti-Stokes scattering signals.The experiment achieved a sensing spatial resolution of 30 cm at a distributed temperature-sensing distance of∼6.0 km.Furthermore,we explored the influence of chaotic pulse width and detector bandwidth on the sensing spatial resolution.In addition,the theoretical experiments proved that the sensing spatial resolution in the proposed scheme was independent of the pulse width and sensing distance.
文摘A hardwale demodulation method for 2-D edge detection is proposed. The filtering step and the differential step are implemented by using the hardware circuit. This demodulation circuit simplifies the edgefinder and reduces the measuring cycle. The calibration method of scale setting is also presented,and bymeasuring some calibrated objects,the demodulation errors and the error correction table is obtained.
基金supported by National Natural Science Foundation of China(Grant No.50575233)National Hi-tech Research and Development Program of China(Grant No.2008AA042408)
文摘The harmonic wavelet transform(HWT)and its fast realization based on fast Fourier transform(FFT)are introduced.Its ability to maintain the same amplitude-frequency feature is revealed.A new method to construct the time-frequency(TF)spectrum of HWT is proposed,which makes the HWT TF spectrum able to correctly reflect the time-frequency-amplitude distribution of the signal.A new way to calculate the HWT coefficients is proposed.By zero padding the data taken out,the non-decimated coefficients of HWT are obtained.Theoretical analysis shows that the modulus of the coefficients obtained by the new calculation way and living at a certain scale are the envelope of the component in the corresponding frequency band.By taking the cross section of the new TF spectrum,the demodulation for the component at a certain frequency band can be realized.A comparison with the Hilbert demodulation combined with band-pass filtering is done,which indicates for multi-components,the method proposed here is more suitable since it realizes ideal band-pass filtering and avoids pass band selecting.In the end,it is applied to bearing and gearbox fault diagnosis,and the results reflect that it can effectively extract the fault features in the signal.
基金We are grateful for financial supports from National Key Research and Development Program of China(2018YFA0701800)Project of Fujian Province Major Science and Technology(2020HZ01012)+1 种基金Natural Science Foundation of Fujian Province(2021J01160)National Natural Science Foundation of China(62061136005).
文摘To increase the storage capacity in holographic data storage(HDS),the information to be stored is encoded into a complex amplitude.Fast and accurate retrieval of amplitude and phase from the reconstructed beam is necessary during data readout in HDS.In this study,we proposed a complex amplitude demodulation method based on deep learning from a single-shot diffraction intensity image and verified it by a non-interferometric lensless experiment demodulating four-level amplitude and four-level phase.By analyzing the correlation between the diffraction intensity features and the amplitude and phase encoding data pages,the inverse problem was decomposed into two backward operators denoted by two convolutional neural networks(CNNs)to demodulate amplitude and phase respectively.The experimental system is simple,stable,and robust,and it only needs a single diffraction image to realize the direct demodulation of both amplitude and phase.To our investigation,this is the first time in HDS that multilevel complex amplitude demodulation is achieved experimentally from one diffraction intensity image without iterations.
基金Supported by National Natural Science Foundation of China(Grant Nos.51335006 and 51605244)
文摘It is a challenging issue to detect bearing fault under nonstationary conditions and gear noise interferences. Meanwhile, the application of the traditional methods is limited by their deficiencies in the aspect of computational accuracy and e ciency, or dependence on the tachometer. Hence, a new fault diagnosis strategy is proposed to remove gear interferences and spectrum smearing phenomenon without the tachometer and angular resampling technique. In this method, the instantaneous dominant meshing multiple(IDMM) is firstly extracted from the time-frequency representation(TFR) of the raw signal, which can be used to calculate the phase functions(PF) and the frequency points(FP). Next, the resonance frequency band excited by the faulty bearing is obtained by the band-pass filter. Furthermore, based on the PFs, the generalized demodulation transform(GDT) is applied to the envelope of the filtered signal. Finally, the target bearing is diagnosed by matching the peaks in the spectra of demodulated signals with the theoretical FPs. The analysis results of simulated and experimental signal demonstrate that the proposed method is an e ective and reliable tool for bearing fault diagnosis without the tachometer and the angular resampling.
基金supported by the National Key R&D Program of China(No.2019YFB2004604)the National Natural Science Foundation of China(No.52075477)the Key R&D Program of Zhejiang Province(No.2021C01139),China。
文摘Condition monitoring and fault diagnosis of gearboxes play an important role in the maintenance of mechanical systems.The vibration signal of gearboxes is characterized by complex spectral structure and strong time variability,which brings challenges to fault feature extraction.To address this issue,a new demodulation technique,based on the Fourier decomposition method and resonance demodulation,is proposed to extract fault-related information.First,the Fourier decomposition method decomposes the vibration signal into Fourier intrinsic band functions(FIBFs)adaptively in the frequency domain.Then,the original signal is segmented into short-time vectors to construct double-row matrices and the maximum singular value ratio method is employed to estimate the resonance frequency.Then,the resonance frequency is used as a criterion to guide the selection of the most relevant FIBF for demodulation analysis.Finally,for the optimal FIBF,envelope demodulation is conducted to identify the fault characteristic frequency.The main contributions are that the proposed method describes how to obtain the resonance frequency effectively and how to select the optimal FIBF after decomposition in order to extract the fault characteristic frequency.Both numerical and experimental studies are conducted to investigate the performance of the proposed method.It is demonstrated that the proposed method can effectively demodulate the fault information from the original signal.
文摘Although envelope spectrum does not involve complicated sideband,thus has a much simpler structure than the common Fourier spectrum,it is still subject to the efect of planets passing or time variant vibration transfer pams.The presence of planets passing frequency,sun gear rotating frequency,or planet carrier rotating frequency in the envelope spectrum may confuse the analysis in fault diagnosis.Therefore,it is important to look for an approach to remove the interferences caused by the efect of planets passing or time variant vibration transfer paths.
基金Supported by the National Natural Science Foundation of China (51176141)the Natural Science Foundation of Tianjin(11JCZDJC22500)
文摘ERT(electrical resistance tomography) is effective method for visualization of multiphase flows,offering some advantages of rapid response and low cost,so as to explore the transient hydrodynamics.Aiming at this target,a fully programmable and reconfigurable FPGA(field programmable gate array)-based Compact PCI(peripheral component interconnect) bus linked sixteen-channel ERT system has been presented.The data acquisition system is carefully designed with function modules of signal generator module;Compact PCI transmission module and data processing module(including data sampling,filtering and demodulating).The processing module incorporates a powerful FPGA with Compact PCI bus for communication,and the measurement process management is conducted in FPGA.Image reconstruction algorithms with different speed and accuracy are also coded for this system.The system has been demonstrated in real time(1400 frames per second for 50 kHz excitation) with signal-noise-ratio above 62 dB and repeatability error below 0.7%.Static experiments have been conducted and the images manifested good resolution relative to the actual object distribution.The parallel ERT system has provided alternative experimental platform for the multiphase flow measurements by the dynamic experiments in terms of concentration and velocity.
文摘A program of adaptive quadrature demodulation is proposed to supply the gaps in the traditional analog detection technology of a silicon micro-machined gyroscope (SMG). This program is suitable for digital phase locked loop (DPLL) drive technology that proposed in other papers. In addition the program adopts an adaptive filtering algorithm, which selects the in-phase and quadrature components that are outputs of the DPLL of the SMG's drive mode as reference signals to update the amplitude of the in-phase and quadrature components of the input signal by iteratively. An objective of the program is to minimize the mean square error of the accurate amplitudes and the estimated amplitudes of SMG's detection mode. The simulation and test results prove the feasibility of the program that lays the foundation for the further improvement of the SMG's system performance and the implementation of the SMG system's self-calibration and self-demarcation in future.
