Low-electrode capacitive deionization(FCDI)is an emerging desalination technology with great potential for removal and/or recycling ions from a range of waters.However,it still suffers from inefficient charge transfer...Low-electrode capacitive deionization(FCDI)is an emerging desalination technology with great potential for removal and/or recycling ions from a range of waters.However,it still suffers from inefficient charge transfer and ion transport kinetics due to weak turbulence and low electric intensity in flow electrodes,both restricted by the current collectors.Herein,a new tip-array current collector(designated as T-CC)was developed to replace the conventional planar current collectors,which intensifies both the charge transfer and ion transport significantly.The effects of tip arrays on flow and electric fields were studied by both computational simulations and electrochemical impedance spectroscopy,which revealed the reduction of ion transport barrier,charge transport barrier and internal resistance.With the voltage increased from 1.0 to 1.5 and 2.0 V,the T-CC-based FCDI system(T-FCDI)exhibited average salt removal rates(ASRR)of 0.18,0.50,and 0.89μmol cm^(-2) min^(-1),respectively,which are 1.82,2.65,and 2.48 folds higher than that of the conventional serpentine current collectors,and 1.48,1.67,and 1.49 folds higher than that of the planar current collectors.Meanwhile,with the solid content in flow electrodes increased from 1 to 5 wt%,the ASRR for T-FCDI increased from 0.29 to 0.50μmol cm^(-2) min^(-1),which are 1.70 and 1.67 folds higher than that of the planar current collectors.Additionally,a salt removal efficiency of 99.89%was achieved with T-FCDI and the charge efficiency remained above 95%after 24 h of operation,thus showing its superior long-term stability.展开更多
The capacitive deionization(CDI)performance of silver(Ag)electrodes is limited by electrochemical failure induced by volumetric expansion.While carbon encapsulation and Ag size control mitigate stress concentration an...The capacitive deionization(CDI)performance of silver(Ag)electrodes is limited by electrochemical failure induced by volumetric expansion.While carbon encapsulation and Ag size control mitigate stress concentration and pulverization,achieving precise size control,suppression of aggregation,and uniform dispersion of Ag nanoparticles remains challenging.Herein,the metal-organic frameworks(MOF)-assisted pyrolysis-galvanic replacement method was employed to construct ultrafine Ag particles uniformly anchored within a three-dimensional(3D)-ordered porous carbon skeleton composite(3D Ag@NC).By utilizing the potential difference between the elements,spontaneous replacement reactions occur,effectively preventing particle agglomeration usually caused by high-temperature reduction.The in situ constructed 3D porous carbon skeleton not only promotes electron transfer and electrolyte penetration but also mitigates the volume expansion of Ag particles during electrochemical cycling.Consequently,3D Ag@NC demonstrates outstanding dechlorination performance(105.29 mg g^(-1)),high charge efficiency(0.95),and exceptional cycling stability(84.12% after 100 cycles).This galvanic replacement strategy offers valuable insights into the fabrication of other small-sized,highly dispersed metal electrode materials.展开更多
Hybrid capacitive deionization(HCDI)shows promise for desalinating brackish and saline water by utilizing the pseudocapacitive properties of faradaic electrodes.Organic materials,with their low environmental impact an...Hybrid capacitive deionization(HCDI)shows promise for desalinating brackish and saline water by utilizing the pseudocapacitive properties of faradaic electrodes.Organic materials,with their low environmental impact and adaptable structures,are attractive for this application.However,their scarcity of active sites and tendency to dissolve in water-based solutions remain significant challenges.Herein,we synthesized a polynaphthalenequinoneimine(PCON)polymer with stable long-range ordered framework and rough three-dimensional floral surface morphology,along with high-density active sites provided by C=O and C=N functional groups,enabling efficient redox reactions and achieving a high Na^(+)capture capability.The synthesized PCON polymer showcases outstanding electroadsorption characteristics and notable structural robustness,attaining an impressive specific capacitance of 500.45 F g^(-1) at 1 A g^(-1) and maintaining 86.1%of its original capacitance following 5000 charge–discharge cycles.Benefiting from the superior pseudocapacitive properties of the PCON polymer,we have developed an HCDI system that not only exhibits exceptional salt removal capacity of 100.8 mg g^(-1) and a remarkable rapid average removal rate of 3.36 mg g^(-1) min-1 but also maintains 97%of its initial desalination capacity after 50 cycles,thereby distinguishing itself in the field of state-ofthe-art desalination technologies with its comprehensive performance that significantly surpasses reported organic capacitive deionization materials.Prospectively,the synthesis paradigm of the double active-sites PCON polymer may be extrapolated to other organic electrodes,heralding new avenues for the design of high-performance desalination systems.展开更多
High-salinity wastewater treatment has always been a challenging issue.In this study,coal tar pitch was used as the carbon source and melamine as the nitrogen source to prepare coal tar pitch-based nanosheets(CPN-9)us...High-salinity wastewater treatment has always been a challenging issue.In this study,coal tar pitch was used as the carbon source and melamine as the nitrogen source to prepare coal tar pitch-based nanosheets(CPN-9)using a salt-template method.The desalination performance of CPN-9 was evaluated using flow-electrode capacitive deionization technology.The results showed that CPN-9 has a high specific surface area(466.34 m^(2)/g),a rich pore structure(micro-/meso-pore volume was 0.28),excellent rheological properties,and hydrophilicity(contact angle of 20.44°),thereby accelerating ion transport.Electrochemical results indicated that CPN-9 exhibits a significant double-layer ion storage mechanism,with a specific capacitance of 176.66 F/g at a current density of 0.5 A/g.CPN-9 has a very low charge transfer resistance.The synergistic effect of aromatic carbon and nitrogen doping(the content of pyrrole and pyridine nitrogen was 36.40%and 35.83%,respectively)in coal tar pitch accelerates electron transfer in CPN-9.The good ion diffusion performance and low impedance of CPN-9 accelerate the ion exchange rate,resulting in outstanding desalination performance.At 1.2 V and 3%mass loading,with a CPN-9 to conductive carbon black ratio of 4:1,the average desalination rate,charge efficiency,and energy consumption reached 0.039 mg/(cm^(2)·min),48.47%,and 0.012 kWh/mol,respectively.In summary,this study optimized the structure of CPN-9 from the perspective of electronic and ionic transport,enhancing its desalination performance and providing theoretical support for the deionization of high-salinity wastewater.展开更多
Electrode materials with high desalination capacity and long-term cyclic stability are the focus of capacitive deionization(CDI) community. Understanding the causes of performance decay in traditional carbons is cruci...Electrode materials with high desalination capacity and long-term cyclic stability are the focus of capacitive deionization(CDI) community. Understanding the causes of performance decay in traditional carbons is crucial to design a high-performance material. Based on this, here, nitrogen-doped activated carbon(NAC) was prepared by pyrolyzing the blend of activated carbon powder(ACP) and melamine for the positive electrode of asymmetric CDI. By comparing the indicators changes such as conductivity, salt adsorption capacity, pH, and charge efficiency of the symmetrical ACP-ACP device to the asymmetric ACP-NAC device under different CDI cycles, as well as the changes of the electrochemical properties of anode and cathode materials after long-term operation, the reasons for the decline of the stability of the CDI performance were revealed. It was found that the carboxyl functional groups generated by the electro-oxidation of anode carbon materials make the anode zero-charge potential(E_(pzc)) shift positively,which results in the uneven distribution of potential windows of CDI units and affects the adsorption capacity. Furthermore, by understanding the electron density on C atoms surrounding the N atoms, we attribute the increased cyclic stability to the enhanced negativity of the charge of carbon atoms adjacent to quaternary-N and pyridinic-oxide-N.展开更多
Flow-electrode capacitive deionization(FCDI)represents a promising approach for ion separation from aqueous solutions.However,the optimization of spacer,particularly for nitrate-contaminated groundwa-ter systems,has o...Flow-electrode capacitive deionization(FCDI)represents a promising approach for ion separation from aqueous solutions.However,the optimization of spacer,particularly for nitrate-contaminated groundwa-ter systems,has often been overlooked.This research comprehensively investigates the influence of using a conductive(carbon cloth,CC)spacer on nitrate removal performance within FCDI system,comparing it to a non-conductive(nylon net,NN)spacer.In both CC and NN FCDI systems,it is unsurprisingly that nitrate removal efficiency improved notably with the increasing current density and hydraulic retention time(HRT).Interestingly,the specific energy consumption(SEC)for nitrate removal did not show obvious fluctuations when the current density and HRT varied in both systems.Under the auspiciously optimized process parameters,CC-FCDI attained a 20%superior nitrate removal efficiency relative to NN-FCDI,ac-companied by a notably diminished SEC for CC-FCDI,registering at a mere 28%of NN-FCDI.This great improvement can be primarily attributed to the decrement in FCDI internal resistance after using con-ductive spacer,which further confirmed by electrochemical tests such as linear sweep voltammetry(LSV)and electrochemical impedance spectroscopy(EIS).Upon prolonged continuous nitrate removal at the optimized conditions,the CC-FCDI system achieved a consistent 90%nitrate removal efficiency with a low SEC of 2.7-7.8 kWh/kg NO_(3)-N,underscoring its steady performance.Overall,this study highlights the pivotal importance of careful spacer design and optimization in realizing energy-efficient groundwater treatment via FCDI.展开更多
Water and energy shortages came due to rapid population growth, living standards and rapid development in the agriculture and industrial sectors. Desalination tends to be one of the most promising water solutions;howe...Water and energy shortages came due to rapid population growth, living standards and rapid development in the agriculture and industrial sectors. Desalination tends to be one of the most promising water solutions;however, it is a process of intense energy. Membrane Capacitive Deionization (MCDI) has received considerable interest as a promising desalination technology, and MCDI research has increased significantly over the last 10 years. In addition, there are no guidelines for the design of Capacitive Deionization (CDI) implementation strategies for individual applications. This study, therefore;provides an alternative of CDI’s recent application developments, with emphasis placed on hybrid systems to address the technological needs of different relevant fields. The MCDI’s energy consumption is compared with the reverse osmosis literature data based on experimental data from laboratory-scale system. The study demonstrates that MCDI technology is a promising technology in the next few years with an extreme competition in water recovery, energy consumption and salt removal for reverse osmosis.展开更多
Chromium(Cr)is a common heavy metal that has severe impacts on the ecosystem and human health.Capacitive deionization(CDI)is an environment-friendly and energy-efficient electrochemical purification technology to remo...Chromium(Cr)is a common heavy metal that has severe impacts on the ecosystem and human health.Capacitive deionization(CDI)is an environment-friendly and energy-efficient electrochemical purification technology to remove Cr from polluted water.The performance of CDI systems relies primarily on the properties of electrodes.Carbon-nanotubes(CNTs)membranes are promising candidates in creating advanced CDI electrodes and processes.However,the low electrosorption capacity and high hydrophobicity of CNTs greatly impede their applications in water systems.In this study,we employ atomic layer deposition(ALD)to deposit TiO_(2) nanoparticulates on CNTs membranes for preparing electrodes with hydrophilicity.The TiO_(2)-deposited CNTs membranes display preferable electrosorption performance and reusability in CDI processes after only 20 ALD cycles deposition.The total Cr and Cr(VI)removal efficiencies are significantly improved to 92.1%and 93.3%,respectively.This work demonstrates that ALD is a highly controllable and simple method to produce advanced CDI electrodes,and broadens the application of metal oxide/carbon composites in the electrochemical processes.展开更多
Battery materials as emerging capacitive deionization electrodes for desalination have better salt removal capacities than traditional carbon-based materials.LiMn_(2)O_(4),a widely used cathode mate-rial,is difficult ...Battery materials as emerging capacitive deionization electrodes for desalination have better salt removal capacities than traditional carbon-based materials.LiMn_(2)O_(4),a widely used cathode mate-rial,is difficult to utilize as a deionization electrode due to its structural instability upon cycling and Mn dissolution in aqueous-based electrolytes.Herein,a facile and low-cost ball-milling routine was proposed to prepare a LiMn_(2)O_(4)material with highly exposed(111)facets.The prepared electrode exhibited relatively low dissolution of Mn during cycling,which shows its long cycle stability.In the hybrid capacitive deionization system,the LiMn_(2)O_(4)/C electrode delivered a high desalination capacity of 117.3 mg g^(−1) without obvious capacity decay at a voltage of 1.0 V with a 20 mM initial salt concentration.In addition,the exposed(111)facets significantly alleviated Mn ion dissolution,which also enhanced the structural steadiness.展开更多
Nitrogenization is an effective method for improving the capacitive deionization(CDI)performance of porous carbon materials.In particular,polymer organic frameworks with heteroatom doping,containing an ordered pore st...Nitrogenization is an effective method for improving the capacitive deionization(CDI)performance of porous carbon materials.In particular,polymer organic frameworks with heteroatom doping,containing an ordered pore structure and excellent electrochemical stability,are ideal precursors for carbon materials for high-performance CDI.In this study,a nitrogen-enriched micro-mesoporous carbon(NMC)electrode was fabricated by carbonizing a Schiff base network-1 at 500,600,and 700℃.Scanning electron microscopy,Fourier transform infrared spectroscopy,X-ray diffraction,N_(2) adsorption-desorption,the contact angle of water,cyclic voltammetry,and electrochemical impedance spectroscopy were used to characterize the morphological structure,wettability,Brunauer–Emmett–Teller surface areas,and electrochemical performance of the NMCs.The results showed that the NMC carbonized at 600℃ achieved the best specific capacitance(152.33 F/g),as well as a high electrosorption capacity(25.53 mg/g)because of its chemical composition(15.57%N)and surface area(312 m^(2)/g).These findings prove that NMC is viable as an electrode material for desalination by high-performance CDI applications.展开更多
The adsorption and desorption behavior of Cr(Ⅵ) in membrane capacitive deionization(MCDI) was investigated systematically in the presence of bovine serum albumin(BSA) and KCl with different concentrations, respective...The adsorption and desorption behavior of Cr(Ⅵ) in membrane capacitive deionization(MCDI) was investigated systematically in the presence of bovine serum albumin(BSA) and KCl with different concentrations, respectively. Results revealed that Cr(Ⅵ) absorption was enhanced and the adsorption amount for Cr(Ⅵ) increased from 155.7 to 190.8 mg/g when KCl concentration increased from 100 to 200 mg/L in the adsorption process, which was attributed to the stronger driving force. However, the adsorption amount sharply decreased to 90.2 mg/g when KCl concentration reached up to 1000 mg/L suggesting the negative effect for Cr(Ⅵ) removal that high KCl concentration had. As for the effect of BSA on ion adsorption, the amount for Cr(Ⅵ) significantly declined to 78.3 mg/g and p H was found to be an important factor contributing to this significant reduction. Then, the desorption performance was also conducted and it was obtained that the presence of KCl had negligible effect on Cr(Ⅵ) desorption, while promoted by the addition of BSA. The incomplete desorption was obtained and the residual chromium ions onto the electrode after desorption was detected via energy-dispersive X-ray spectroscopy(EDS). Based on above analysis, the enhanced removal mechanism for Cr(Ⅵ) in MCDI was found to be consisted of ion adsorption onto electrode surface, the redox reaction of Cr(Ⅵ) into Cr(III)and precipitation, which was demonstrated by X-ray photoelectron spectroscopy(XPS) and scanning electron microscope(SEM).展开更多
Because of the low energy requirement and the environmentally safe byproducts, the capacitive deionization water desalination technology has attracted the attention of many researchers. The important requirements for ...Because of the low energy requirement and the environmentally safe byproducts, the capacitive deionization water desalination technology has attracted the attention of many researchers. The important requirements for electrode materials are good electrical conductivity, high surface area, good chemical stability and high specific capacitance. In this study, metallic nanoparticles that are encapsulated in a graphite shell(Cd doped Co/C NPs) are introduced as the new electrode material for the capacitive deionization process because they have higher specific capacitance than the pristine carbonaceous materials. Cd doped Co/C NPs perform better than graphene and the activated carbon. The introduced nanoparticles were synthesized using a simple sol gel technique. A typical sol gel composed of cadmium acetate, cobalt acetate and poly(vinyl alcohol)was prepared based on the polycondensation property of the acetates. The physiochemical characterizations that were used confirmed that the drying, grinding and calcination in an Ar atmosphere of the prepared gel produced the Cd doped Co nanoparticles, which were encapsulated in a thin graphite layer. Overall, the present study suggests a new method to effectively use the encapsulated bimetallic nanostructures in the capacitive deionization technology.展开更多
Monolithic carbon electrodes with robust mechanical integrity and porous architecture are highly desired for capacitive deionization but remain challenging.Owing to the excellent mechanical strength and electroconduct...Monolithic carbon electrodes with robust mechanical integrity and porous architecture are highly desired for capacitive deionization but remain challenging.Owing to the excellent mechanical strength and electroconductivity,commercial carbon fibers cloth demonstrates great potential as high-performance electrodes for ions storage.Despite this,its direct application on capacitive deionization is rarely reported in terms of limited pore structure and natural hydrophobicity.Herein,a powerful metal-organic framework-engaged structural regulation strategy is developed to boost the desalination properties of carbon fibers.The obtained porous carbon fibers features hierarchical porous structure and hydrophilic surface providing abundant ions-accessible sites,and continuous graphitized carbon core ensuring rapid electrons transport.The catalytic-etching mechanism involving oxidation of Co and subsequent carbonthermal reduction is proposed and highly relies on annealing temperature and holding time.When directly evaluated as a current collector-free capacitive deionization electrode,the porous carbon fibers demonstrates much superior desalination capability than pristine carbon fibers,and remarkable cyclic stability up to 20 h with negligible degeneration.Particularly,the PCF-1000 showcases the highest areal salt adsorption capacity of 0.037 mg cm^(−2) among carbon microfibers.Moreover,monolithic porous carbon fibers-carbon nanotubes with increased active sites and good structural integrity by in-situ growth of carbon nanotubes are further fabricated to enhance the desalination performance(0.051 mg cm^(−2)).This work demonstrates the great potential of carbon fibers in constructing high-efficient and robust monolithic electrode for capacitive deionization.展开更多
Capacitance for electrostatic adsorption forms primarily within a Debye length of the electrode surface. Capacitive carbon electrodes were derivatized with ionic groups by means of adsorbing a surfactant in order to t...Capacitance for electrostatic adsorption forms primarily within a Debye length of the electrode surface. Capacitive carbon electrodes were derivatized with ionic groups by means of adsorbing a surfactant in order to test the theory that attached ionic groups would exclude co-ions and increase coulombic efficiency without the need for an added charge barrier membrane. It has been discovered that capacitive electrodes surface derivatized with ionic groups become polarized and intrinsically more coulombically efficient.展开更多
MXene materials have got great attention from researchers of environmental treatment for the great electrochemical performance.Monolayer-Ti_(3)C_(2)T_(x)(T_(x) is the surface terminal groups such as-O,-OH and/or-F spe...MXene materials have got great attention from researchers of environmental treatment for the great electrochemical performance.Monolayer-Ti_(3)C_(2)T_(x)(T_(x) is the surface terminal groups such as-O,-OH and/or-F species),as a typical structural MXene,always shows better chemical-physical characteristics than multilayer-Ti_(3)C_(2)T_(x).Thus,we prepared monolayer-Ti_(3)C_(2)T_(x) electrode by HF etching method and absolute ethyl alcohol intercalationdelamination treatment for capacitive deionization(CDI).The prepared monolay-Ti_(3)C_(2)T_(x) shows a higher specific surface area(235.6 m^(2)/g)and a thinner thickness(0.8 nm).Moreover,a series of systematic investigation demonstrated that monolayer-Ti_(3)C_(2)T_(x) has obvious promotional phenomenon on electrochemical properties(e.g.,mass specific capacitance increased from 52.1 F/g to 144.7 F/g).The NaCl adsorption capacity of monolayer-Ti_(3)C_(2)T_(x),is 30.7 mg/g in 1000 mg/L NaCl solution at 1.2 V.We concluded that the electro-sorption mechanism could be expressed as double electric layer and monolayer coverage by a good fitting of Langmuir isotherms and the pseudo-second-order kinetics equation.This work would provide a new strategy for the application of monolayer-Ti_(3)C_(2)T_(x) material in wastewater treatment in the future.展开更多
The“battery type”inorganic electrode has been demonstrated the highly efficient sodium ion intercalation capacity for capacitive deionization.In this work,the CoMn_(2)O_(4)(CMO)microspheres with porous core-shell st...The“battery type”inorganic electrode has been demonstrated the highly efficient sodium ion intercalation capacity for capacitive deionization.In this work,the CoMn_(2)O_(4)(CMO)microspheres with porous core-shell structure are prepared via co-precipitation and followed by annealing.The effects of annealing temperatures on the morphology,pore structure,valence state,and electrochemical behavior of CMO are explored.As electrode for capacitive deionization,the salt removal capacity and current efficiency of optimized AC||CMO device reaches up to 60.7 mg g^(−1) and 97.6%,respectively,and the capacity retention rate is 74.1%after 50 cycles.Remarkably,both the in-situ X-ray diffraction and ex-situ X-ray diffraction analysis features that the intercalation/de-intercalation of sodium ions are governed by(103)and(221)crystal planes of CMO.Accordingly,the density functional theory calculations realize that the adsorption energies of Na+onto(103)and(221)crystal planes are higher than that of any other crystal planes,manifesting the priorities in adsorption of sodium atoms.Furthermore,the X-ray photoelectron spectra of pristine and post-CMO electrode highlights that the reversible conversion of Mn^(3+)/Mn^(4+)couple is resulted from the intercalation/de-intercalation of Na^(+),while this is irreversible for Co^(3+)/Co^(2+)couple.Beyond that,the CMO electrode has been proven the selectivity removal of Na^(+) over K^(+)and Mg^(2+)in a multi-cation stream.展开更多
Carbon materials have the advantages of good electrical conductivity and excellent chemical stability, so many carbon materials have been introduced as electrodes for the capacitive deionization (CDI) process. Due to ...Carbon materials have the advantages of good electrical conductivity and excellent chemical stability, so many carbon materials have been introduced as electrodes for the capacitive deionization (CDI) process. Due to the low surface area compared to the other nanocarbonaceous materials, CNFs performance as electrode in the CDI units is comparatively low. This problem has been overcome by preparing high surface area carbon nanofibers and by creating numerous long pores on the nanofibers surface. The modified CNFs have been synthesized using low cost, high yield and facile method;electrospinning technique. Stabilization and graphitization of electrospun nanofiber mats composed of polyacrylonitrile (PAN) and poly (methyl methacrylate) (PMMA) leads form longitudinal pores CNFs. The utilized characterizations indicated that the CNFs obtained from electrospun solution having 50% PMMA have surface area of 181 m2/g which are more than the conventional CNFs. Accordingly, these nanofibers revealed salt removal efficiency of ~90% and specific capacitance of 237 F/g.展开更多
Composite electrodes prepared by cation exchange resins and activated carbon(AC)were used to adsorb Ⅴ(Ⅳ)in capacitive deionization(CDI).The electrode made of middle resin size(D860/AC M)had the largest specific surf...Composite electrodes prepared by cation exchange resins and activated carbon(AC)were used to adsorb Ⅴ(Ⅳ)in capacitive deionization(CDI).The electrode made of middle resin size(D860/AC M)had the largest specific surface area and mesoporous content than two other composite electrodes.Electrochemical analysis showed that D860/AC M presents higher specific capacitance and electrical double layer capacitor than the others,and significantly lower internal diffusion impedance.Thus,D860/AC M exhibits the highest adsorption capacity and rate of Ⅴ(Ⅳ)among three electrodes.The intra-particle diffusion model fits well in the initial adsorption stage,while the liquid film diffusion model is more suitable for fitting at the later stage.The pseudo-second-order kinetic model is suited for the entire adsorption process.The adsorption of Ⅴ(Ⅳ)on the composite electrode follows that of the Freundlich isotherm.Thermodynamic analysis indicates that the adsorption of Ⅴ(Ⅳ)is an exothermic process with entropy reduction,and the electric field force plays a dominant role in the CDI process.This work aims to improve our understanding of the ion adsorption behaviors and mechanisms on the composite electrodes in CDI.展开更多
Biomass-derived carbon has demonstrated great potentials as advanced electrode for capacitive deionization(CDI),owing to good electroconductivity,easy availability,intrinsic pores/channels.However,conventional simple ...Biomass-derived carbon has demonstrated great potentials as advanced electrode for capacitive deionization(CDI),owing to good electroconductivity,easy availability,intrinsic pores/channels.However,conventional simple pyrolysis of biomass always generates inadequate porosity with limited surface area.Moreover,biomass-derived carbon also suffers from poor wettability and single physical adsorption of ions,resulting in limited desalination performance.Herein,pore structure optimization and element co-doping are integrated on banana peels(BP)-derived carbon to construct hierarchically porous and B,N co-doped carbon with large ions-accessible surface area.A unique expansionactivation(EA)strategy is proposed to modulate the porosity and specific surface area of carbon.Furthermore,B,N co-doping could increase the ions-accessible sites with improved hydrophilicity,and promote ions adsorption.Benefitting from the synergistic effect of hierarchical porosity and B,N co-doping,the resultant electrode manifest enhanced CDI performance for NaCl with large desalination capacity(29.5 mg g^(-1)),high salt adsorption rate(6.2 mg g^(-1)min^(-1)),and versatile adsorption ability for other salts.Density functional theory reveals the enhanced deionization mechanism by pore and B,N co-doping.This work proposes a facile EA strategy for pore structure modulation of biomass-derived carbon,and demonstrates great potentials of integrating pore and heteroatoms-doping on constructing high-performance CDI electrode.展开更多
Electrode materials with strong desalting ability is an important research direction of capacitive deionization.In this study,HKUST-1 was successfully synthesized by the solvothermal method,and MOFsderived porous carb...Electrode materials with strong desalting ability is an important research direction of capacitive deionization.In this study,HKUST-1 was successfully synthesized by the solvothermal method,and MOFsderived porous carbon/Cu@Cu_(2)O composites were prepared by simple pyrolysis as cathode materials for CDI.After high-temperature pyrolysis,the Cu^(+) site with unsaturated coordination is generated,and the structure changes from micropores to the coexistence of mesoporous and micropores.The complex pore structure is conducive to strengthening ion migration and diffusion.The results show that the porous carbon/Cu@Cu_(2)O materials derived from MOFs depend on the pseudocapacitance behavior for capacitive deionization and desalination.At a voltage window of-1.2V~1.2V,a current density of 40mA/g.and 5 mmol/L NaCl,the HDC-1100 exhibited the best desalting capacity of 30.9 mg/g.HDC-1100 also has good cycle stability.After 20 cycles of adsorption and desorption,the desalting capacity almost does not decrease.Therefore,MOFs derived porous carbon/Cu@Cu_(2)O composites are expected to be an excellent choice for CDI cathode materials.展开更多
基金supported by the Shenzhen Science and Technology Program(JCYJ20230808105111022,JCYJ20220818095806013)Natural Science Foundation of Guangdong(2023A1515012267)+1 种基金the National Natural Science Foundation of China(22178223)the Royal Society/NSFC cost share program(IEC\NSFC\223372).
文摘Low-electrode capacitive deionization(FCDI)is an emerging desalination technology with great potential for removal and/or recycling ions from a range of waters.However,it still suffers from inefficient charge transfer and ion transport kinetics due to weak turbulence and low electric intensity in flow electrodes,both restricted by the current collectors.Herein,a new tip-array current collector(designated as T-CC)was developed to replace the conventional planar current collectors,which intensifies both the charge transfer and ion transport significantly.The effects of tip arrays on flow and electric fields were studied by both computational simulations and electrochemical impedance spectroscopy,which revealed the reduction of ion transport barrier,charge transport barrier and internal resistance.With the voltage increased from 1.0 to 1.5 and 2.0 V,the T-CC-based FCDI system(T-FCDI)exhibited average salt removal rates(ASRR)of 0.18,0.50,and 0.89μmol cm^(-2) min^(-1),respectively,which are 1.82,2.65,and 2.48 folds higher than that of the conventional serpentine current collectors,and 1.48,1.67,and 1.49 folds higher than that of the planar current collectors.Meanwhile,with the solid content in flow electrodes increased from 1 to 5 wt%,the ASRR for T-FCDI increased from 0.29 to 0.50μmol cm^(-2) min^(-1),which are 1.70 and 1.67 folds higher than that of the planar current collectors.Additionally,a salt removal efficiency of 99.89%was achieved with T-FCDI and the charge efficiency remained above 95%after 24 h of operation,thus showing its superior long-term stability.
基金financially supported by the Innovative Research Groups of the National Natural Science Foundation of China(No.52121004)the National Natural Science Foundation of China(52374423)+1 种基金the Major Science and Technology Programs of Yunnan Province(202302AB080016)the Hunan Provincial Natural Science Youth Fund(2024JJ6726)。
文摘The capacitive deionization(CDI)performance of silver(Ag)electrodes is limited by electrochemical failure induced by volumetric expansion.While carbon encapsulation and Ag size control mitigate stress concentration and pulverization,achieving precise size control,suppression of aggregation,and uniform dispersion of Ag nanoparticles remains challenging.Herein,the metal-organic frameworks(MOF)-assisted pyrolysis-galvanic replacement method was employed to construct ultrafine Ag particles uniformly anchored within a three-dimensional(3D)-ordered porous carbon skeleton composite(3D Ag@NC).By utilizing the potential difference between the elements,spontaneous replacement reactions occur,effectively preventing particle agglomeration usually caused by high-temperature reduction.The in situ constructed 3D porous carbon skeleton not only promotes electron transfer and electrolyte penetration but also mitigates the volume expansion of Ag particles during electrochemical cycling.Consequently,3D Ag@NC demonstrates outstanding dechlorination performance(105.29 mg g^(-1)),high charge efficiency(0.95),and exceptional cycling stability(84.12% after 100 cycles).This galvanic replacement strategy offers valuable insights into the fabrication of other small-sized,highly dispersed metal electrode materials.
基金supported by the National Key R&D Program of China(Grant Nos.2023YFC3009900)National Natural Science Foundation of China(Grant Nos.61904116)+1 种基金Natural Science Foundation of Jiangsu Province(Grant Nos.BK20211029)the young scientific talent lifting project of Jiangsu Association for Science and Technology(Grant Nos.JSTJ-2023-018).
文摘Hybrid capacitive deionization(HCDI)shows promise for desalinating brackish and saline water by utilizing the pseudocapacitive properties of faradaic electrodes.Organic materials,with their low environmental impact and adaptable structures,are attractive for this application.However,their scarcity of active sites and tendency to dissolve in water-based solutions remain significant challenges.Herein,we synthesized a polynaphthalenequinoneimine(PCON)polymer with stable long-range ordered framework and rough three-dimensional floral surface morphology,along with high-density active sites provided by C=O and C=N functional groups,enabling efficient redox reactions and achieving a high Na^(+)capture capability.The synthesized PCON polymer showcases outstanding electroadsorption characteristics and notable structural robustness,attaining an impressive specific capacitance of 500.45 F g^(-1) at 1 A g^(-1) and maintaining 86.1%of its original capacitance following 5000 charge–discharge cycles.Benefiting from the superior pseudocapacitive properties of the PCON polymer,we have developed an HCDI system that not only exhibits exceptional salt removal capacity of 100.8 mg g^(-1) and a remarkable rapid average removal rate of 3.36 mg g^(-1) min-1 but also maintains 97%of its initial desalination capacity after 50 cycles,thereby distinguishing itself in the field of state-ofthe-art desalination technologies with its comprehensive performance that significantly surpasses reported organic capacitive deionization materials.Prospectively,the synthesis paradigm of the double active-sites PCON polymer may be extrapolated to other organic electrodes,heralding new avenues for the design of high-performance desalination systems.
基金financially supported by National Natural Science Foundation of China(Nos.52374286 and 52274279)the National Key Research and Development Program of China(No.2021YFC2902604)。
文摘High-salinity wastewater treatment has always been a challenging issue.In this study,coal tar pitch was used as the carbon source and melamine as the nitrogen source to prepare coal tar pitch-based nanosheets(CPN-9)using a salt-template method.The desalination performance of CPN-9 was evaluated using flow-electrode capacitive deionization technology.The results showed that CPN-9 has a high specific surface area(466.34 m^(2)/g),a rich pore structure(micro-/meso-pore volume was 0.28),excellent rheological properties,and hydrophilicity(contact angle of 20.44°),thereby accelerating ion transport.Electrochemical results indicated that CPN-9 exhibits a significant double-layer ion storage mechanism,with a specific capacitance of 176.66 F/g at a current density of 0.5 A/g.CPN-9 has a very low charge transfer resistance.The synergistic effect of aromatic carbon and nitrogen doping(the content of pyrrole and pyridine nitrogen was 36.40%and 35.83%,respectively)in coal tar pitch accelerates electron transfer in CPN-9.The good ion diffusion performance and low impedance of CPN-9 accelerate the ion exchange rate,resulting in outstanding desalination performance.At 1.2 V and 3%mass loading,with a CPN-9 to conductive carbon black ratio of 4:1,the average desalination rate,charge efficiency,and energy consumption reached 0.039 mg/(cm^(2)·min),48.47%,and 0.012 kWh/mol,respectively.In summary,this study optimized the structure of CPN-9 from the perspective of electronic and ionic transport,enhancing its desalination performance and providing theoretical support for the deionization of high-salinity wastewater.
文摘Electrode materials with high desalination capacity and long-term cyclic stability are the focus of capacitive deionization(CDI) community. Understanding the causes of performance decay in traditional carbons is crucial to design a high-performance material. Based on this, here, nitrogen-doped activated carbon(NAC) was prepared by pyrolyzing the blend of activated carbon powder(ACP) and melamine for the positive electrode of asymmetric CDI. By comparing the indicators changes such as conductivity, salt adsorption capacity, pH, and charge efficiency of the symmetrical ACP-ACP device to the asymmetric ACP-NAC device under different CDI cycles, as well as the changes of the electrochemical properties of anode and cathode materials after long-term operation, the reasons for the decline of the stability of the CDI performance were revealed. It was found that the carboxyl functional groups generated by the electro-oxidation of anode carbon materials make the anode zero-charge potential(E_(pzc)) shift positively,which results in the uneven distribution of potential windows of CDI units and affects the adsorption capacity. Furthermore, by understanding the electron density on C atoms surrounding the N atoms, we attribute the increased cyclic stability to the enhanced negativity of the charge of carbon atoms adjacent to quaternary-N and pyridinic-oxide-N.
基金supported by Shanxi Province Basic Research Program(Free Exploration Category)(No.202203021221041)National Natural Science Foundation of China(No.52300016)+1 种基金China Postdoctoral Science Foundation(No.2023M733379)Students Innovation and Entrepreneurship Foundation of USTC(No.CY2022G12).
文摘Flow-electrode capacitive deionization(FCDI)represents a promising approach for ion separation from aqueous solutions.However,the optimization of spacer,particularly for nitrate-contaminated groundwa-ter systems,has often been overlooked.This research comprehensively investigates the influence of using a conductive(carbon cloth,CC)spacer on nitrate removal performance within FCDI system,comparing it to a non-conductive(nylon net,NN)spacer.In both CC and NN FCDI systems,it is unsurprisingly that nitrate removal efficiency improved notably with the increasing current density and hydraulic retention time(HRT).Interestingly,the specific energy consumption(SEC)for nitrate removal did not show obvious fluctuations when the current density and HRT varied in both systems.Under the auspiciously optimized process parameters,CC-FCDI attained a 20%superior nitrate removal efficiency relative to NN-FCDI,ac-companied by a notably diminished SEC for CC-FCDI,registering at a mere 28%of NN-FCDI.This great improvement can be primarily attributed to the decrement in FCDI internal resistance after using con-ductive spacer,which further confirmed by electrochemical tests such as linear sweep voltammetry(LSV)and electrochemical impedance spectroscopy(EIS).Upon prolonged continuous nitrate removal at the optimized conditions,the CC-FCDI system achieved a consistent 90%nitrate removal efficiency with a low SEC of 2.7-7.8 kWh/kg NO_(3)-N,underscoring its steady performance.Overall,this study highlights the pivotal importance of careful spacer design and optimization in realizing energy-efficient groundwater treatment via FCDI.
文摘Water and energy shortages came due to rapid population growth, living standards and rapid development in the agriculture and industrial sectors. Desalination tends to be one of the most promising water solutions;however, it is a process of intense energy. Membrane Capacitive Deionization (MCDI) has received considerable interest as a promising desalination technology, and MCDI research has increased significantly over the last 10 years. In addition, there are no guidelines for the design of Capacitive Deionization (CDI) implementation strategies for individual applications. This study, therefore;provides an alternative of CDI’s recent application developments, with emphasis placed on hybrid systems to address the technological needs of different relevant fields. The MCDI’s energy consumption is compared with the reverse osmosis literature data based on experimental data from laboratory-scale system. The study demonstrates that MCDI technology is a promising technology in the next few years with an extreme competition in water recovery, energy consumption and salt removal for reverse osmosis.
基金Financial supports from the Jiangsu Natural Science Foundation(BK20190677)National Natural Science Foundation of China(21908096)+2 种基金Scientific Research Foundation of Chuzhou University(2020qd06)support from the Program of Excellent Innovation Teams of Jiangsu Higher Education Institutionsthe Project of Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)。
文摘Chromium(Cr)is a common heavy metal that has severe impacts on the ecosystem and human health.Capacitive deionization(CDI)is an environment-friendly and energy-efficient electrochemical purification technology to remove Cr from polluted water.The performance of CDI systems relies primarily on the properties of electrodes.Carbon-nanotubes(CNTs)membranes are promising candidates in creating advanced CDI electrodes and processes.However,the low electrosorption capacity and high hydrophobicity of CNTs greatly impede their applications in water systems.In this study,we employ atomic layer deposition(ALD)to deposit TiO_(2) nanoparticulates on CNTs membranes for preparing electrodes with hydrophilicity.The TiO_(2)-deposited CNTs membranes display preferable electrosorption performance and reusability in CDI processes after only 20 ALD cycles deposition.The total Cr and Cr(VI)removal efficiencies are significantly improved to 92.1%and 93.3%,respectively.This work demonstrates that ALD is a highly controllable and simple method to produce advanced CDI electrodes,and broadens the application of metal oxide/carbon composites in the electrochemical processes.
基金supported by the National Key Research and Development Program of China(2020YFC1909200)the National Natural Science Foundation of China(52104315).
文摘Battery materials as emerging capacitive deionization electrodes for desalination have better salt removal capacities than traditional carbon-based materials.LiMn_(2)O_(4),a widely used cathode mate-rial,is difficult to utilize as a deionization electrode due to its structural instability upon cycling and Mn dissolution in aqueous-based electrolytes.Herein,a facile and low-cost ball-milling routine was proposed to prepare a LiMn_(2)O_(4)material with highly exposed(111)facets.The prepared electrode exhibited relatively low dissolution of Mn during cycling,which shows its long cycle stability.In the hybrid capacitive deionization system,the LiMn_(2)O_(4)/C electrode delivered a high desalination capacity of 117.3 mg g^(−1) without obvious capacity decay at a voltage of 1.0 V with a 20 mM initial salt concentration.In addition,the exposed(111)facets significantly alleviated Mn ion dissolution,which also enhanced the structural steadiness.
基金supported by the Local Innovative and Research Teams Project of Guangdong Pearl River Talents Program(No.2017BT01Z032)the National Natural Science Foundation of China(No.21577027)the 2017 Central Special Fund for Soil,Preliminary Study on Harmless Treatment and Comprehensive Utilization of Tailings in Dabao Mountain(No.18HK0108)。
文摘Nitrogenization is an effective method for improving the capacitive deionization(CDI)performance of porous carbon materials.In particular,polymer organic frameworks with heteroatom doping,containing an ordered pore structure and excellent electrochemical stability,are ideal precursors for carbon materials for high-performance CDI.In this study,a nitrogen-enriched micro-mesoporous carbon(NMC)electrode was fabricated by carbonizing a Schiff base network-1 at 500,600,and 700℃.Scanning electron microscopy,Fourier transform infrared spectroscopy,X-ray diffraction,N_(2) adsorption-desorption,the contact angle of water,cyclic voltammetry,and electrochemical impedance spectroscopy were used to characterize the morphological structure,wettability,Brunauer–Emmett–Teller surface areas,and electrochemical performance of the NMCs.The results showed that the NMC carbonized at 600℃ achieved the best specific capacitance(152.33 F/g),as well as a high electrosorption capacity(25.53 mg/g)because of its chemical composition(15.57%N)and surface area(312 m^(2)/g).These findings prove that NMC is viable as an electrode material for desalination by high-performance CDI applications.
基金financially supported by the National Natural Science Fund of China (No. 51508153)the Natural Science Fund of Jiangsu (No. BK20150813)+1 种基金the Fundamental Research Funds for the Central UniversitiesA Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘The adsorption and desorption behavior of Cr(Ⅵ) in membrane capacitive deionization(MCDI) was investigated systematically in the presence of bovine serum albumin(BSA) and KCl with different concentrations, respectively. Results revealed that Cr(Ⅵ) absorption was enhanced and the adsorption amount for Cr(Ⅵ) increased from 155.7 to 190.8 mg/g when KCl concentration increased from 100 to 200 mg/L in the adsorption process, which was attributed to the stronger driving force. However, the adsorption amount sharply decreased to 90.2 mg/g when KCl concentration reached up to 1000 mg/L suggesting the negative effect for Cr(Ⅵ) removal that high KCl concentration had. As for the effect of BSA on ion adsorption, the amount for Cr(Ⅵ) significantly declined to 78.3 mg/g and p H was found to be an important factor contributing to this significant reduction. Then, the desorption performance was also conducted and it was obtained that the presence of KCl had negligible effect on Cr(Ⅵ) desorption, while promoted by the addition of BSA. The incomplete desorption was obtained and the residual chromium ions onto the electrode after desorption was detected via energy-dispersive X-ray spectroscopy(EDS). Based on above analysis, the enhanced removal mechanism for Cr(Ⅵ) in MCDI was found to be consisted of ion adsorption onto electrode surface, the redox reaction of Cr(Ⅵ) into Cr(III)and precipitation, which was demonstrated by X-ray photoelectron spectroscopy(XPS) and scanning electron microscope(SEM).
基金financially supported by the National Plan for Science & Technology (NPST), King Saud University Project No. 11-NAN1460-02
文摘Because of the low energy requirement and the environmentally safe byproducts, the capacitive deionization water desalination technology has attracted the attention of many researchers. The important requirements for electrode materials are good electrical conductivity, high surface area, good chemical stability and high specific capacitance. In this study, metallic nanoparticles that are encapsulated in a graphite shell(Cd doped Co/C NPs) are introduced as the new electrode material for the capacitive deionization process because they have higher specific capacitance than the pristine carbonaceous materials. Cd doped Co/C NPs perform better than graphene and the activated carbon. The introduced nanoparticles were synthesized using a simple sol gel technique. A typical sol gel composed of cadmium acetate, cobalt acetate and poly(vinyl alcohol)was prepared based on the polycondensation property of the acetates. The physiochemical characterizations that were used confirmed that the drying, grinding and calcination in an Ar atmosphere of the prepared gel produced the Cd doped Co nanoparticles, which were encapsulated in a thin graphite layer. Overall, the present study suggests a new method to effectively use the encapsulated bimetallic nanostructures in the capacitive deionization technology.
基金We gratefully acknowledge financial supports from the Natural Science Founda-tion of Shandong Province (No.ZR2020QE066)Taishan Scholar Project (No.ts201511080)+1 种基金the fellowship of China Postdoctoral Science Foundation (No.2020M672081)Opening Project of State Key Laboratory of Advanced Tech-nology for Float Glass (No.2020KF08).
文摘Monolithic carbon electrodes with robust mechanical integrity and porous architecture are highly desired for capacitive deionization but remain challenging.Owing to the excellent mechanical strength and electroconductivity,commercial carbon fibers cloth demonstrates great potential as high-performance electrodes for ions storage.Despite this,its direct application on capacitive deionization is rarely reported in terms of limited pore structure and natural hydrophobicity.Herein,a powerful metal-organic framework-engaged structural regulation strategy is developed to boost the desalination properties of carbon fibers.The obtained porous carbon fibers features hierarchical porous structure and hydrophilic surface providing abundant ions-accessible sites,and continuous graphitized carbon core ensuring rapid electrons transport.The catalytic-etching mechanism involving oxidation of Co and subsequent carbonthermal reduction is proposed and highly relies on annealing temperature and holding time.When directly evaluated as a current collector-free capacitive deionization electrode,the porous carbon fibers demonstrates much superior desalination capability than pristine carbon fibers,and remarkable cyclic stability up to 20 h with negligible degeneration.Particularly,the PCF-1000 showcases the highest areal salt adsorption capacity of 0.037 mg cm^(−2) among carbon microfibers.Moreover,monolithic porous carbon fibers-carbon nanotubes with increased active sites and good structural integrity by in-situ growth of carbon nanotubes are further fabricated to enhance the desalination performance(0.051 mg cm^(−2)).This work demonstrates the great potential of carbon fibers in constructing high-efficient and robust monolithic electrode for capacitive deionization.
文摘Capacitance for electrostatic adsorption forms primarily within a Debye length of the electrode surface. Capacitive carbon electrodes were derivatized with ionic groups by means of adsorbing a surfactant in order to test the theory that attached ionic groups would exclude co-ions and increase coulombic efficiency without the need for an added charge barrier membrane. It has been discovered that capacitive electrodes surface derivatized with ionic groups become polarized and intrinsically more coulombically efficient.
基金Project(2018YFC1900300)supported by the National Key R&D Program of ChinaProject(51825403)supported by the National Science Fund for Distinguished Young Scholars,ChinaProject(2018SK2026)supported by the Key R&D Program of Hunan Province,China。
文摘MXene materials have got great attention from researchers of environmental treatment for the great electrochemical performance.Monolayer-Ti_(3)C_(2)T_(x)(T_(x) is the surface terminal groups such as-O,-OH and/or-F species),as a typical structural MXene,always shows better chemical-physical characteristics than multilayer-Ti_(3)C_(2)T_(x).Thus,we prepared monolayer-Ti_(3)C_(2)T_(x) electrode by HF etching method and absolute ethyl alcohol intercalationdelamination treatment for capacitive deionization(CDI).The prepared monolay-Ti_(3)C_(2)T_(x) shows a higher specific surface area(235.6 m^(2)/g)and a thinner thickness(0.8 nm).Moreover,a series of systematic investigation demonstrated that monolayer-Ti_(3)C_(2)T_(x) has obvious promotional phenomenon on electrochemical properties(e.g.,mass specific capacitance increased from 52.1 F/g to 144.7 F/g).The NaCl adsorption capacity of monolayer-Ti_(3)C_(2)T_(x),is 30.7 mg/g in 1000 mg/L NaCl solution at 1.2 V.We concluded that the electro-sorption mechanism could be expressed as double electric layer and monolayer coverage by a good fitting of Langmuir isotherms and the pseudo-second-order kinetics equation.This work would provide a new strategy for the application of monolayer-Ti_(3)C_(2)T_(x) material in wastewater treatment in the future.
基金This work was supported by the National Natural Science Foundation of China (No.21862016)Project of Ningxia key R&D plan (No.2017BY064).
文摘The“battery type”inorganic electrode has been demonstrated the highly efficient sodium ion intercalation capacity for capacitive deionization.In this work,the CoMn_(2)O_(4)(CMO)microspheres with porous core-shell structure are prepared via co-precipitation and followed by annealing.The effects of annealing temperatures on the morphology,pore structure,valence state,and electrochemical behavior of CMO are explored.As electrode for capacitive deionization,the salt removal capacity and current efficiency of optimized AC||CMO device reaches up to 60.7 mg g^(−1) and 97.6%,respectively,and the capacity retention rate is 74.1%after 50 cycles.Remarkably,both the in-situ X-ray diffraction and ex-situ X-ray diffraction analysis features that the intercalation/de-intercalation of sodium ions are governed by(103)and(221)crystal planes of CMO.Accordingly,the density functional theory calculations realize that the adsorption energies of Na+onto(103)and(221)crystal planes are higher than that of any other crystal planes,manifesting the priorities in adsorption of sodium atoms.Furthermore,the X-ray photoelectron spectra of pristine and post-CMO electrode highlights that the reversible conversion of Mn^(3+)/Mn^(4+)couple is resulted from the intercalation/de-intercalation of Na^(+),while this is irreversible for Co^(3+)/Co^(2+)couple.Beyond that,the CMO electrode has been proven the selectivity removal of Na^(+) over K^(+)and Mg^(2+)in a multi-cation stream.
文摘Carbon materials have the advantages of good electrical conductivity and excellent chemical stability, so many carbon materials have been introduced as electrodes for the capacitive deionization (CDI) process. Due to the low surface area compared to the other nanocarbonaceous materials, CNFs performance as electrode in the CDI units is comparatively low. This problem has been overcome by preparing high surface area carbon nanofibers and by creating numerous long pores on the nanofibers surface. The modified CNFs have been synthesized using low cost, high yield and facile method;electrospinning technique. Stabilization and graphitization of electrospun nanofiber mats composed of polyacrylonitrile (PAN) and poly (methyl methacrylate) (PMMA) leads form longitudinal pores CNFs. The utilized characterizations indicated that the CNFs obtained from electrospun solution having 50% PMMA have surface area of 181 m2/g which are more than the conventional CNFs. Accordingly, these nanofibers revealed salt removal efficiency of ~90% and specific capacitance of 237 F/g.
基金financially supported by the National Natural Science Foundation of China(No.51874222).
文摘Composite electrodes prepared by cation exchange resins and activated carbon(AC)were used to adsorb Ⅴ(Ⅳ)in capacitive deionization(CDI).The electrode made of middle resin size(D860/AC M)had the largest specific surface area and mesoporous content than two other composite electrodes.Electrochemical analysis showed that D860/AC M presents higher specific capacitance and electrical double layer capacitor than the others,and significantly lower internal diffusion impedance.Thus,D860/AC M exhibits the highest adsorption capacity and rate of Ⅴ(Ⅳ)among three electrodes.The intra-particle diffusion model fits well in the initial adsorption stage,while the liquid film diffusion model is more suitable for fitting at the later stage.The pseudo-second-order kinetic model is suited for the entire adsorption process.The adsorption of Ⅴ(Ⅳ)on the composite electrode follows that of the Freundlich isotherm.Thermodynamic analysis indicates that the adsorption of Ⅴ(Ⅳ)is an exothermic process with entropy reduction,and the electric field force plays a dominant role in the CDI process.This work aims to improve our understanding of the ion adsorption behaviors and mechanisms on the composite electrodes in CDI.
基金We gratefully acknowledge financial supports from the National Natural Science Foundation of China(No.52202371,51905125,52102364)the Natural Science Foundation of Shandong Province(No.ZR2020QE066)+2 种基金Opening Project of State Key Laboratory of Advanced Technology for Float Glass(No.2020KF08)SDUT&Zibo City Integration Development Project(No.2021SNPT0045)the fellowship of China Postdoctoral Science Foundation(No.2020M672081).
文摘Biomass-derived carbon has demonstrated great potentials as advanced electrode for capacitive deionization(CDI),owing to good electroconductivity,easy availability,intrinsic pores/channels.However,conventional simple pyrolysis of biomass always generates inadequate porosity with limited surface area.Moreover,biomass-derived carbon also suffers from poor wettability and single physical adsorption of ions,resulting in limited desalination performance.Herein,pore structure optimization and element co-doping are integrated on banana peels(BP)-derived carbon to construct hierarchically porous and B,N co-doped carbon with large ions-accessible surface area.A unique expansionactivation(EA)strategy is proposed to modulate the porosity and specific surface area of carbon.Furthermore,B,N co-doping could increase the ions-accessible sites with improved hydrophilicity,and promote ions adsorption.Benefitting from the synergistic effect of hierarchical porosity and B,N co-doping,the resultant electrode manifest enhanced CDI performance for NaCl with large desalination capacity(29.5 mg g^(-1)),high salt adsorption rate(6.2 mg g^(-1)min^(-1)),and versatile adsorption ability for other salts.Density functional theory reveals the enhanced deionization mechanism by pore and B,N co-doping.This work proposes a facile EA strategy for pore structure modulation of biomass-derived carbon,and demonstrates great potentials of integrating pore and heteroatoms-doping on constructing high-performance CDI electrode.
基金supported by The National Natural Science Foundation of China(Nos.22276137,52170087).
文摘Electrode materials with strong desalting ability is an important research direction of capacitive deionization.In this study,HKUST-1 was successfully synthesized by the solvothermal method,and MOFsderived porous carbon/Cu@Cu_(2)O composites were prepared by simple pyrolysis as cathode materials for CDI.After high-temperature pyrolysis,the Cu^(+) site with unsaturated coordination is generated,and the structure changes from micropores to the coexistence of mesoporous and micropores.The complex pore structure is conducive to strengthening ion migration and diffusion.The results show that the porous carbon/Cu@Cu_(2)O materials derived from MOFs depend on the pseudocapacitance behavior for capacitive deionization and desalination.At a voltage window of-1.2V~1.2V,a current density of 40mA/g.and 5 mmol/L NaCl,the HDC-1100 exhibited the best desalting capacity of 30.9 mg/g.HDC-1100 also has good cycle stability.After 20 cycles of adsorption and desorption,the desalting capacity almost does not decrease.Therefore,MOFs derived porous carbon/Cu@Cu_(2)O composites are expected to be an excellent choice for CDI cathode materials.
