Molecular dynamics （MD） simulations of monocrystalline copper （100） surface during nanomachining process were performed based on a new 3D simulation model. The material removal mechanism and system temperature dis...Molecular dynamics （MD） simulations of monocrystalline copper （100） surface during nanomachining process were performed based on a new 3D simulation model. The material removal mechanism and system temperature distribution were discussed. The simulation results indicate that the system temperature distribution presents a roughly concentric shape, a steep temperature gradient is observed in diamond cutting tool, and the highest temperature is located in chip. Centrosymmetry parameter method was used to monitor defect structures. Dislocations and vacancies are the two principal types of defect structures. Residual defect structures impose a major change on the workpiece physical properties and machined surface quality. The defect structures in workpiece are temperature dependent. As the temperature increases, the dislocations are mainly mediated from the workpiece surface, while the others are dissociated into point defects. The relatively high cutting speed used in nanomachining results in less defect structures, beneficial to obtain highly machined surface quality.展开更多
Double-resonance Raman(DRR)scattering in two-di-mensional(2D)materials describes the intravalley or intervalley scattering of an electron or a hole excited by incident photons.Although the presence of defects can prov...Double-resonance Raman(DRR)scattering in two-di-mensional(2D)materials describes the intravalley or intervalley scattering of an electron or a hole excited by incident photons.Although the presence of defects can provide additional momentum and influence the scat-tering process involving one or two phonons,only the idealized defects without any structural details are considered in tra-ditional DRR theory.Here,the second-order DRR spectra of WSe_(2) monolayer with different types of defects are calculated involving the combinations of acoustic and optical phonons in the vicinity of K(K')and M points of the Brillouin zone.The electronic band structures are modified due to the presence of defects,and the band unfolding method is adopted to show the bending of valence and conduction bands for the defective WSe_(2) monolayers.The associ-ated phononic band structures also exhibit different changes in phonon dispersion curves,re-sulting in different DRR spectra corresponding to the different types of defects in the WSe_(2) monolayers.For example,the existence of W vacancy in the WSe_(2) monolayer would result in downshifts in vibrational frequencies and asymmetrical broadenings in linewidths for most combination modes due to the dramatic changes in contour shape of electronic valleys at K and K'.Moreover,the scattering from K to Q is found to be forbidden for the two Se vacan-cies because of the elevation of conduction band at the Q point.Our work highlights the role of defect structures in the intervalley scattering and may provide better understanding in the underlying physics of DRR process in 2D materials.展开更多
The EPR 9 factors for cubic, tetragonal and orthorhombic Fe^＋ centers in alkali halides MX （M= Li, Na; X = F, CI） are calculated from second-order perturbation formulas of g factors based on cluster approach for 3...The EPR 9 factors for cubic, tetragonal and orthorhombic Fe^＋ centers in alkali halides MX （M= Li, Na; X = F, CI） are calculated from second-order perturbation formulas of g factors based on cluster approach for 3d^7 ions in three symmetries. From calculations, the g factors of these Fe^＋ centers in MX crystals are reasonably explained and the defect structural data for the tetragonal and orthorhombic Fe^＋ centers are estimated. The results are discussed.展开更多
A compact high-scanning-rate circular-polarized leaky-wave antenna(LWA)based on a meandering substrate integrated waveguide(SIW)with defected ground structures(DGSs)is presented.The meandering-SIW design is employed t...A compact high-scanning-rate circular-polarized leaky-wave antenna(LWA)based on a meandering substrate integrated waveguide(SIW)with defected ground structures(DGSs)is presented.The meandering-SIW design is employed to enhance the beam scanning rate,while circular polarization is achieved by etchingπ-shaped slots on the top plane.To suppress the open stopband at broadside,offset circular DGSs are periodically etched on the ground plane.Their impact on the reflection coefficient and axial ratio is then analyzed through a parametric study.A prototype of the antenna is simulated,fabricated,and measured.Both simulated and measured results indicate a scanning rate of approximately 8.6,with continuous beam scanning from-41°to 59°across the 11.3-12.7 GHz operating band.The antenna maintains an axial ratio below 3 dB within the 11.5-12.3 GHz range.This design shows promise for use in wireless communication systems,particularly in environments with increasingly limited spectrum resources.展开更多
The filter characteristic of defected ground structure (DGS) is analyzed and the equivalent circuit of C-shaped DGS is extracted. The characteristics of non-periodic and periodic DGS with different dimensions are comp...The filter characteristic of defected ground structure (DGS) is analyzed and the equivalent circuit of C-shaped DGS is extracted. The characteristics of non-periodic and periodic DGS with different dimensions are compared. Then the DGS is simulated and optimized with software, and the circuit board is manufactured and measured.The non-periodic structure is simple in structure and small in size and ripple compared with the periodic structure.Though the stop band of the non-periodic structure is narrow, it can meet the requirement of application. The C-shaped structure with two stop bands can select frequency in a special band.展开更多
Based on inspection data,the authors analyze and summarize the main types and distribution characteristics of tunnel structural defects.These defects are classified into three types:surface defects,internal defects,an...Based on inspection data,the authors analyze and summarize the main types and distribution characteristics of tunnel structural defects.These defects are classified into three types:surface defects,internal defects,and defects behind the structure.To address the need for rapid detection of different defect types,the current state of rapid detection technologies and equipment,both domestically and internationally,is systematically reviewed.The research reveals that surface defect detection technologies and equipment have developed rapidly in recent years.Notably,the integration of machine vision and laser scanning technologies have significantly improved detection efficiency and accuracy,achieving crack detection precision of up to 0.1 mm.However,the non-contact rapid detection of internal and behind-the-structure defects remains constrained by hardware limitations,with traditional detection remaining dominant.Nevertheless,phased array radar,ultrasonic,and acoustic vibration detection technologies have become research hotspots in recent years,offering promising directions for detecting these challenging defect types.Additionally,the application of multisensor fusion technology in rapid detection equipment has further enhanced detection capabilities.Devices such as cameras,3D laser scanners,infrared thermal imagers,and radar demonstrate significant advantages in rapid detection.Future research in tunnel inspection should prioritize breakthroughs in rapid detection technologies for internal and behind-the-structure defects.Efforts should also focus on developing multifunctional integrated detection vehicles that can simultaneously inspect both surface and internal structures.Furthermore,progress in fully automated,intelligent systems with precise defect identification and real-time reporting will be essential to significantly improve the efficiency and accuracy of tunnel inspection.展开更多
Pyrochlore oxide(Y_(2)Ru_(2)O_(7))has been identified as a promising catalyst for the oxygen evolution reaction(OER)in advanced green energy strategies.However,its electrochemical inertness necessitates the exploratio...Pyrochlore oxide(Y_(2)Ru_(2)O_(7))has been identified as a promising catalyst for the oxygen evolution reaction(OER)in advanced green energy strategies.However,its electrochemical inertness necessitates the exploration of an effective strategy to facilitate electronic modulation.This study proposes a surface modification approach involving the integration of defective NiFe(D-NiFe)nanoparticles onto a Y_(2)Ru_(2)O_(7)(YRO)support(YRO@D-NiFeP/Ru)using a Prussian blue analog(PBA).Numerous cyanide(CN)vacancies are generated through the oxidation treatment of the NiFe PBA grown on the YRO support,yielding a defective PBA precursor(YRO@D-PBA).Subsequent annealing facilitates the transformation to the D-NiFe nanoparticles on the YRO support(YRO@D-NiFeP/Ru),which augments the exposure of Ni3+active sites beneficial for the OER.Moreover,the reduction of Ru cations from YRO results in the exsolution of Ru nanoparticles,which promotes synergistic charge transfer from the nanoparticles to the interior of Y_(2)Ru_(2)O_(7).Consequently,YRO@D-NiFeP/Ru exhibits a remarkable voltage of 1.49 V at 10 mA·cm^(−2) and the lowest Tafel slope of 42.4 mV·dec^(−1).In addition,a Zn–air battery constructed with YRO@D-NiFeP/Ru exhibits an outstanding power density of 136.2 mW·cm^(−2) and high charge–discharge stability,confirming the applicability of YRO@D-NiFeP/Ru in metal-air batteries.展开更多
Design of a miniaturized lumped-element bandpass filter in multilayer liquid crystal polymer technology is proposed.Fractional bandwidth of the bandpass filter is 20%,operating at a center frequency of 500 MHz.In orde...Design of a miniaturized lumped-element bandpass filter in multilayer liquid crystal polymer technology is proposed.Fractional bandwidth of the bandpass filter is 20%,operating at a center frequency of 500 MHz.In order to further reduce the size and improve the performance of the proposed filter,defected ground structure(DGS)has been implemented in the filter.Based on this structure,the volume of the inductor is reduced by 60%eficiently compared with the inductor without DGS,and the Q-factor is increased up to 257%compared with the traditional multilayer spiral inductor.The measured results indicate that the designed filter has a very sharp stopband,an insertion loss of 2.3dB,and a return loss of 18.6dB in the passband.The whole volume of the fabricated filter is 0.032入_(g)×0.05入_(g)×0.00075入_(g),where Ag is the guided wavelength of the center frequency.The proposed filter is easily integrated into radio-frequency/microwave circuitry at a low manufacturing cost,especially wireless communication.展开更多
Dislocation structures in a bulk Pb-doped Bi Sr- Ca- Cu- O high temperature superconductor wereimaged. Dislocation morphologies shown by transmission electron microscopy were discussed.
Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distor...Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distortion losses is desired.In this paper,a compact Ultra-Wideband(UWB)V-shaped monopole antenna is presented.UWB response is achieved by modifying the ground plane with Chichen Itzia inspired rectangular staircase shape.The proposed V-shaped is designed by incorporating a rectangle,and an inverted isosceles triangle using FR4 substrate.The size of the antenna is 25 mm×26 mm×1.6 mm.The proposed V-shaped monopole antenna produces bandwidth response of 3 GHz Industrial,Scientific,and Medical(ISM),Worldwide Interoperability for Microwave Access(WiMAX),(IEEE 802.11/HIPERLAN band,5G sub 6 GHz)which with an additional square cut amplified the bandwidth response up to 8 GHz ranging from 3.1 GHz to 10.6 GHz attaining UWB defined by Federal Communications Commission(FCC)with a maximum gain of 3.83 dB.The antenna is designed in Ansys HFSS.Results for key performance parameters of the antenna are presented.The measured results are in good agreement with the simulated results.Due to flat gain,uniform group delay,omni directional radiation pattern characteristics and well-matched impedance,the proposed antenna is suitable for WiMAX,ISM and heterogeneous wireless systems.展开更多
This article studies the application of the alternating current field measurement （ACFM） method in defect detection for underwater structures. Numerical model of the ACFM system is built for structure surface defect...This article studies the application of the alternating current field measurement （ACFM） method in defect detection for underwater structures. Numerical model of the ACFM system is built for structure surface defect detection in seawater environment. Finite element simulation is performed to investigate rules and characteristics of the electromagnetic signal distribution in the defected area. In respect of the simulation results, underwater artificial crack detection experiments are designed and conducted for the ACFM system. The experiment results show that the ACFM system can detect cracks in underwater structures and the detection accuracy is higher than 85%. This can meet the engineering requirement of underwater structure defect detection. The results in this article can be applied to establish technical foundation for the optimization and development of ACFM based underwater structure defects detection system.展开更多
From the idea of failure of defective structures at high temperature beingcontrolled by two mechanisms: fast fracture due to creep crack growth initiating at the crack tipand creep rupture on the weakened section, a t...From the idea of failure of defective structures at high temperature beingcontrolled by two mechanisms: fast fracture due to creep crack growth initiating at the crack tipand creep rupture on the weakened section, a time-dependent failure assessment diagram (TDFAD) isdeveloped on the basis of the time dependent crack tip parameter J integral. According to theproposed TDFAD method, detailed crack initiation and creep crack growth analysis is avoided insafety assessments of high temperature structures by performing simple calculations of stressintensity factor and limit load. To evaluate the creep toughness parameter K_(mat), three differentexpressions are suggested on the basis of experimental load-line displacement, creep crackinitiation and growth parameters as well as the isochronous stress-strain curve. The influence ofservice factors such as temperature and service-time on the proposed TDFAD is discussed by using theproperties of 2.25CrlMo steel and an example is also presented to illustrate the approach.展开更多
NH_(2)-UIO66(NU)is a promising photocatalyst for the reduction of Cr(VI)to low-toxic Cr(III)driven by visible light under ambient conditions.However,the main limitation in this process is the ineffi cient ligand to me...NH_(2)-UIO66(NU)is a promising photocatalyst for the reduction of Cr(VI)to low-toxic Cr(III)driven by visible light under ambient conditions.However,the main limitation in this process is the ineffi cient ligand to metal charge transfer(LMCT)of photo-excited electrons,which is caused by inherent energy gap(ΔE_(LMCT)).This study synthesized the defective NU(NUXH,where X is the molar equivalent of the modulator)with reducedΔE_(LMCT)through linkers removal via acid treatment.The electronic structure of NUX-H was systematically investigated,and the results indicated that the structural defects in NUX-H strongly altered the environment of the Zr atoms.Furthermore,they substantially lowered the energy of the unoccupied d orbitals(LUMO),which was benefi cial to effi cient LMCT,resulting in an improved photocatalytic activity of NUX-H toward high-concentration(100 mg/L)Cr(VI)reduction.Compared to NU with defect-free structure,the reducing rate of Cr(VI)was increased by 47 times.This work introduced an alternative strategy in terms of designing effi cient photocatalysts for reducing Cr(VI)under ambient conditions.展开更多
In this paper,a unit cell of a single-negative metamaterial structure loaded with a meander line and defected ground structure(DGS)is investigated as the principle radiating element of an antenna.The unit cell antenna...In this paper,a unit cell of a single-negative metamaterial structure loaded with a meander line and defected ground structure(DGS)is investigated as the principle radiating element of an antenna.The unit cell antenna causes even or odd mode resonances similar to the unit cell structure depending on the orientation of the microstrip feed used to excite the unit cell.However,the orientation which gives low-frequency resonance is considered here.The unit cell antenna is then loaded with a meander line which is parallel to the split bearing side and connects the other two sides orthogonal to the split bearing side.This modified structure excites another mode of resonance at high frequency when a meander line defect is loaded on the metallic ground plane.Specific parameters of the meander line structure,the DGS shape,and the unit cell are optimized to place these two resonances at different frequencies with proper frequency intervals to enhance the bandwidth.Finally,the feed is placed in an offset position for better impedance matching without affecting the bandwidth The compact dimension of the antenna is 0.25λL×0.23λL×0.02λL,whereλL is the free space wavelength with respect to the center frequency of the impedance bandwidth.The proposed antenna is fabricated and measured.Experimental results reveal that the modified design gives monopole like radiation patterns which achieves a fractional operating bandwidth of 26.6%,from 3.26 to 4.26 GHz for|S11|<−10 dB and a pick gain of 1.26 dBi is realized.In addition,the simulated and measured crosspolarization levels are both less than−15 dB in the horizontal plane.展开更多
Three-dimensional(3 D) hybrid of nanocarbons is a very promising way to the high-performance design of electrocatalysis materials.However,sp^(3)-like defect structure,a combination of high strength and conduction of g...Three-dimensional(3 D) hybrid of nanocarbons is a very promising way to the high-performance design of electrocatalysis materials.However,sp^(3)-like defect structure,a combination of high strength and conduction of graphene and carbon nanotubes(CNTs) is rarely reported.Herein,3 D neural-like hybrids of graphene(from reduced graphene oxide) and carbon nanotubes(CNTs) have been integrated via sp^(3)-like defect structure by a hydrothermal approach.The sp^(3)-like defect structure endows 3 D nanocarbon hybrids with an enhanced carrier transfer,high structural stability,and electrocatalytic durability.The neural-like structure is shown to demonstrate a cascade effect of charges and significant performances regarding bio-electrocatalysis and lithium-sulfur energy storage.The concept and mechanism of "sp^(3)-like defect structure" are proposed at an atomic/nanoscale to clarify the generation of rational structure as well as the cascade electron transfer.展开更多
As a mixed conductor,LaSr3Fe3O10-δ with triple layer perovskite intergrowth structure can be used as an oxygen separation membrane material and cathode material in solid oxide fuell cells.LaSr3Fe3O10-δ was synthesiz...As a mixed conductor,LaSr3Fe3O10-δ with triple layer perovskite intergrowth structure can be used as an oxygen separation membrane material and cathode material in solid oxide fuell cells.LaSr3Fe3O10-δ was synthesized via citrate acid route.Iodine titration method was used to determine the average valence of transition metal Fe and oxygen nonstoichiometry δ.Conductivities of LaSr3Fe3O10-δ were measured in the oxygen partial pressure range from 10-2×105 to 1×105 Pa,by Ac four probe method.Seebeck coefficient...展开更多
The dielectric properties of ceramics with composition of (Sr 1-x Bi x )TiO 3+x/2 (where x =0.05～0.70 ) were measured at frequency of 1 MHz. The experimental results indicate that the dielectric properties of (Sr 1-x...The dielectric properties of ceramics with composition of (Sr 1-x Bi x )TiO 3+x/2 (where x =0.05～0.70 ) were measured at frequency of 1 MHz. The experimental results indicate that the dielectric properties of (Sr 1-x Bi x )TiO 3+x/2 system are greatly varied with an increase of the stoichiometric amounts of Bi 2O 3. The relative permittivity of the solid solutions is high, and the dissipation factor is low. The positron annihilation technique(PAT) was adopted to study the defect structure. An explanation of the dielectric properties of Bi-doped SrTiO 3 ceramics has been suggested in terms of electron-compensation and vacancy or defect-compensation mechanisms and space-charge polarization mechanism.展开更多
TiO_(2)(B) nanosheets/GO(graphene oxide) hybrids are considered to be outstanding performance photocatalysts for high efficiency of H_(2) evolution. However, they still suffer severe challenges during the synthetic pr...TiO_(2)(B) nanosheets/GO(graphene oxide) hybrids are considered to be outstanding performance photocatalysts for high efficiency of H_(2) evolution. However, they still suffer severe challenges during the synthetic processes, such as a large amount of the capping agents adhering on the surface and easy occurrence of aggregation. To figure out these obstacles, Ar plasma treatment as a modified method in this study not only enable the TiO_(2)(B) nanosheets distributed uniformly on the GO sheets but also engineer defects within TiO_(2)(B) nanosheets to significantly improve the photocatalytic activity for the water splitting. The hydrogen evolution rate of the TiO_(2)-x(B)/GO sheets is 1.4 times higher compared with that of original TiO_(2)(B)/GO sheets without Ar plasma treatment. The improved photocatalytic properties were owing to the synergetic effects of oxygen vacancies and the heterojunction between GO and TiO_(2)(B), which can promote the visible light utilization and accelerate separation and transportation of photogenerated electron-holes. This study can provide a facile pathway to prepare the two-dimensional hybrid photocatalysts with high photocatalytic H_(2) activity.展开更多
The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopo...The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopotential theory Solitary waves were generated in the sample under mechanical loading. Their interaction with the vacancy complexes was shown to be able to initiate hot spot in that local region of the complexes. Some parameters of the hot spot as well as solitary waves were calculated. The initiation of the hot spot is accompanied with sufficient local structural relaxation.展开更多
We describe here a one-step method for the synthesis of Au/TiO2 nanosphere materials,which were formed by layered deposition of multiple anatase TiO2 nanosheets.The Au nanoparticles were stabilized by structural defec...We describe here a one-step method for the synthesis of Au/TiO2 nanosphere materials,which were formed by layered deposition of multiple anatase TiO2 nanosheets.The Au nanoparticles were stabilized by structural defects in each TiO2 nanosheet,including crystal steps and edges,thereby fixing the Au-TiO2 perimeter interface.Reactant transfer occurred along the gaps between these TiO2 nanosheet layers and in contact with catalytically active sites at the Au-TiO2 interface.The doped Au induced the formation of oxygen vacancies in the Au-TiO2 interface.Such vacancies are essential for generating active oxygen species（-＊O^-） on the TiO2 surface and Ti^3＋ ions in bulk TiO2.These ions can then form Ti^3＋-O^--Ti^4＋species,which are known to enhance the catalytic activity of formaldehyde（HCHO） oxidation.These studies on structural and oxygen vacancy defects in Au/TiO2 samples provide a theoretical foundation for the catalytic mechanism of HCHO oxidation on oxide-supported Au materials.展开更多
基金Project (50925521) supported by the National Natural Science Fund for Distinguished Young Scholars of China
文摘Molecular dynamics （MD） simulations of monocrystalline copper （100） surface during nanomachining process were performed based on a new 3D simulation model. The material removal mechanism and system temperature distribution were discussed. The simulation results indicate that the system temperature distribution presents a roughly concentric shape, a steep temperature gradient is observed in diamond cutting tool, and the highest temperature is located in chip. Centrosymmetry parameter method was used to monitor defect structures. Dislocations and vacancies are the two principal types of defect structures. Residual defect structures impose a major change on the workpiece physical properties and machined surface quality. The defect structures in workpiece are temperature dependent. As the temperature increases, the dislocations are mainly mediated from the workpiece surface, while the others are dissociated into point defects. The relatively high cutting speed used in nanomachining results in less defect structures, beneficial to obtain highly machined surface quality.
基金supported by the National Natural Sci-ence Foundation of China(No.22174135,No.21790352)the National Key R&D Program of China(No.2021YFA1500500,No.2016YFA0200600)+4 种基金the Strategic Priority Research Program of Chinese Academy of Sciences(No.XDB36000000)Anhui Initiative in Quantum Information Technologies(No.AHY090100)CAS Project for Young Scientists in Basic Research(No.YSBR-054)Innovation Program for Quantum Science and Technology(No.2021ZD0303301)the Fundamental Research Funds for the Central Universities.
文摘Double-resonance Raman(DRR)scattering in two-di-mensional(2D)materials describes the intravalley or intervalley scattering of an electron or a hole excited by incident photons.Although the presence of defects can provide additional momentum and influence the scat-tering process involving one or two phonons,only the idealized defects without any structural details are considered in tra-ditional DRR theory.Here,the second-order DRR spectra of WSe_(2) monolayer with different types of defects are calculated involving the combinations of acoustic and optical phonons in the vicinity of K(K')and M points of the Brillouin zone.The electronic band structures are modified due to the presence of defects,and the band unfolding method is adopted to show the bending of valence and conduction bands for the defective WSe_(2) monolayers.The associ-ated phononic band structures also exhibit different changes in phonon dispersion curves,re-sulting in different DRR spectra corresponding to the different types of defects in the WSe_(2) monolayers.For example,the existence of W vacancy in the WSe_(2) monolayer would result in downshifts in vibrational frequencies and asymmetrical broadenings in linewidths for most combination modes due to the dramatic changes in contour shape of electronic valleys at K and K'.Moreover,the scattering from K to Q is found to be forbidden for the two Se vacan-cies because of the elevation of conduction band at the Q point.Our work highlights the role of defect structures in the intervalley scattering and may provide better understanding in the underlying physics of DRR process in 2D materials.
基金The project supported by National Natural Science Foundation of China under Grant No. 10274054
文摘The EPR 9 factors for cubic, tetragonal and orthorhombic Fe^＋ centers in alkali halides MX （M= Li, Na; X = F, CI） are calculated from second-order perturbation formulas of g factors based on cluster approach for 3d^7 ions in three symmetries. From calculations, the g factors of these Fe^＋ centers in MX crystals are reasonably explained and the defect structural data for the tetragonal and orthorhombic Fe^＋ centers are estimated. The results are discussed.
文摘A compact high-scanning-rate circular-polarized leaky-wave antenna(LWA)based on a meandering substrate integrated waveguide(SIW)with defected ground structures(DGSs)is presented.The meandering-SIW design is employed to enhance the beam scanning rate,while circular polarization is achieved by etchingπ-shaped slots on the top plane.To suppress the open stopband at broadside,offset circular DGSs are periodically etched on the ground plane.Their impact on the reflection coefficient and axial ratio is then analyzed through a parametric study.A prototype of the antenna is simulated,fabricated,and measured.Both simulated and measured results indicate a scanning rate of approximately 8.6,with continuous beam scanning from-41°to 59°across the 11.3-12.7 GHz operating band.The antenna maintains an axial ratio below 3 dB within the 11.5-12.3 GHz range.This design shows promise for use in wireless communication systems,particularly in environments with increasingly limited spectrum resources.
基金Supported by Natural Science Foundation of China(No.60371029).
文摘The filter characteristic of defected ground structure (DGS) is analyzed and the equivalent circuit of C-shaped DGS is extracted. The characteristics of non-periodic and periodic DGS with different dimensions are compared. Then the DGS is simulated and optimized with software, and the circuit board is manufactured and measured.The non-periodic structure is simple in structure and small in size and ripple compared with the periodic structure.Though the stop band of the non-periodic structure is narrow, it can meet the requirement of application. The C-shaped structure with two stop bands can select frequency in a special band.
文摘Based on inspection data,the authors analyze and summarize the main types and distribution characteristics of tunnel structural defects.These defects are classified into three types:surface defects,internal defects,and defects behind the structure.To address the need for rapid detection of different defect types,the current state of rapid detection technologies and equipment,both domestically and internationally,is systematically reviewed.The research reveals that surface defect detection technologies and equipment have developed rapidly in recent years.Notably,the integration of machine vision and laser scanning technologies have significantly improved detection efficiency and accuracy,achieving crack detection precision of up to 0.1 mm.However,the non-contact rapid detection of internal and behind-the-structure defects remains constrained by hardware limitations,with traditional detection remaining dominant.Nevertheless,phased array radar,ultrasonic,and acoustic vibration detection technologies have become research hotspots in recent years,offering promising directions for detecting these challenging defect types.Additionally,the application of multisensor fusion technology in rapid detection equipment has further enhanced detection capabilities.Devices such as cameras,3D laser scanners,infrared thermal imagers,and radar demonstrate significant advantages in rapid detection.Future research in tunnel inspection should prioritize breakthroughs in rapid detection technologies for internal and behind-the-structure defects.Efforts should also focus on developing multifunctional integrated detection vehicles that can simultaneously inspect both surface and internal structures.Furthermore,progress in fully automated,intelligent systems with precise defect identification and real-time reporting will be essential to significantly improve the efficiency and accuracy of tunnel inspection.
基金supported by Korea Institute of Energy Technology Evaluation and Planning(KETEP)grant funded by the Korea government(MOTIE)(No.RS-2024-00398346,ESS BigData-Based O&M and Asset Management Technical Manpower Training)the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.RS-2024-00350658).
文摘Pyrochlore oxide(Y_(2)Ru_(2)O_(7))has been identified as a promising catalyst for the oxygen evolution reaction(OER)in advanced green energy strategies.However,its electrochemical inertness necessitates the exploration of an effective strategy to facilitate electronic modulation.This study proposes a surface modification approach involving the integration of defective NiFe(D-NiFe)nanoparticles onto a Y_(2)Ru_(2)O_(7)(YRO)support(YRO@D-NiFeP/Ru)using a Prussian blue analog(PBA).Numerous cyanide(CN)vacancies are generated through the oxidation treatment of the NiFe PBA grown on the YRO support,yielding a defective PBA precursor(YRO@D-PBA).Subsequent annealing facilitates the transformation to the D-NiFe nanoparticles on the YRO support(YRO@D-NiFeP/Ru),which augments the exposure of Ni3+active sites beneficial for the OER.Moreover,the reduction of Ru cations from YRO results in the exsolution of Ru nanoparticles,which promotes synergistic charge transfer from the nanoparticles to the interior of Y_(2)Ru_(2)O_(7).Consequently,YRO@D-NiFeP/Ru exhibits a remarkable voltage of 1.49 V at 10 mA·cm^(−2) and the lowest Tafel slope of 42.4 mV·dec^(−1).In addition,a Zn–air battery constructed with YRO@D-NiFeP/Ru exhibits an outstanding power density of 136.2 mW·cm^(−2) and high charge–discharge stability,confirming the applicability of YRO@D-NiFeP/Ru in metal-air batteries.
基金the Shaanxi Provincial Key Research and Development Program(No.2020GY-040)。
文摘Design of a miniaturized lumped-element bandpass filter in multilayer liquid crystal polymer technology is proposed.Fractional bandwidth of the bandpass filter is 20%,operating at a center frequency of 500 MHz.In order to further reduce the size and improve the performance of the proposed filter,defected ground structure(DGS)has been implemented in the filter.Based on this structure,the volume of the inductor is reduced by 60%eficiently compared with the inductor without DGS,and the Q-factor is increased up to 257%compared with the traditional multilayer spiral inductor.The measured results indicate that the designed filter has a very sharp stopband,an insertion loss of 2.3dB,and a return loss of 18.6dB in the passband.The whole volume of the fabricated filter is 0.032入_(g)×0.05入_(g)×0.00075入_(g),where Ag is the guided wavelength of the center frequency.The proposed filter is easily integrated into radio-frequency/microwave circuitry at a low manufacturing cost,especially wireless communication.
文摘Dislocation structures in a bulk Pb-doped Bi Sr- Ca- Cu- O high temperature superconductor wereimaged. Dislocation morphologies shown by transmission electron microscopy were discussed.
基金This work was supported by the Research Program through the National Research Foundation of Korea,NRF-2019R1A2C1005920,S.K.
文摘Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distortion losses is desired.In this paper,a compact Ultra-Wideband(UWB)V-shaped monopole antenna is presented.UWB response is achieved by modifying the ground plane with Chichen Itzia inspired rectangular staircase shape.The proposed V-shaped is designed by incorporating a rectangle,and an inverted isosceles triangle using FR4 substrate.The size of the antenna is 25 mm×26 mm×1.6 mm.The proposed V-shaped monopole antenna produces bandwidth response of 3 GHz Industrial,Scientific,and Medical(ISM),Worldwide Interoperability for Microwave Access(WiMAX),(IEEE 802.11/HIPERLAN band,5G sub 6 GHz)which with an additional square cut amplified the bandwidth response up to 8 GHz ranging from 3.1 GHz to 10.6 GHz attaining UWB defined by Federal Communications Commission(FCC)with a maximum gain of 3.83 dB.The antenna is designed in Ansys HFSS.Results for key performance parameters of the antenna are presented.The measured results are in good agreement with the simulated results.Due to flat gain,uniform group delay,omni directional radiation pattern characteristics and well-matched impedance,the proposed antenna is suitable for WiMAX,ISM and heterogeneous wireless systems.
基金supported by the National Natural Science Foundation of China(Grant No.50905187)the Shandong Provincial Natural Science Foundation(Grant No.ZR2009FQ001)
文摘This article studies the application of the alternating current field measurement （ACFM） method in defect detection for underwater structures. Numerical model of the ACFM system is built for structure surface defect detection in seawater environment. Finite element simulation is performed to investigate rules and characteristics of the electromagnetic signal distribution in the defected area. In respect of the simulation results, underwater artificial crack detection experiments are designed and conducted for the ACFM system. The experiment results show that the ACFM system can detect cracks in underwater structures and the detection accuracy is higher than 85%. This can meet the engineering requirement of underwater structure defect detection. The results in this article can be applied to establish technical foundation for the optimization and development of ACFM based underwater structure defects detection system.
文摘From the idea of failure of defective structures at high temperature beingcontrolled by two mechanisms: fast fracture due to creep crack growth initiating at the crack tipand creep rupture on the weakened section, a time-dependent failure assessment diagram (TDFAD) isdeveloped on the basis of the time dependent crack tip parameter J integral. According to theproposed TDFAD method, detailed crack initiation and creep crack growth analysis is avoided insafety assessments of high temperature structures by performing simple calculations of stressintensity factor and limit load. To evaluate the creep toughness parameter K_(mat), three differentexpressions are suggested on the basis of experimental load-line displacement, creep crackinitiation and growth parameters as well as the isochronous stress-strain curve. The influence ofservice factors such as temperature and service-time on the proposed TDFAD is discussed by using theproperties of 2.25CrlMo steel and an example is also presented to illustrate the approach.
基金This work was supported by the National Key Research and Development Program of China(No.2020YFA0211000)the National Natural Science Foundation of China(Nos.21876114,21761142011,and 51572174)+3 种基金the Shanghai Government(Nos.19DZ1205102 and 19160712900)the International Joint Laboratory on Resource Chemistry(No.IJLRC)the Ministry of Education of China(No.PCSIRT_IRT_16R49)This research was also supported by The Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning,the Shuguang Research Program of Shanghai Education Committee,and the Shanghai Engineering Research Center of Green Energy Chemical Engineering(No.18DZ2254200).
文摘NH_(2)-UIO66(NU)is a promising photocatalyst for the reduction of Cr(VI)to low-toxic Cr(III)driven by visible light under ambient conditions.However,the main limitation in this process is the ineffi cient ligand to metal charge transfer(LMCT)of photo-excited electrons,which is caused by inherent energy gap(ΔE_(LMCT)).This study synthesized the defective NU(NUXH,where X is the molar equivalent of the modulator)with reducedΔE_(LMCT)through linkers removal via acid treatment.The electronic structure of NUX-H was systematically investigated,and the results indicated that the structural defects in NUX-H strongly altered the environment of the Zr atoms.Furthermore,they substantially lowered the energy of the unoccupied d orbitals(LUMO),which was benefi cial to effi cient LMCT,resulting in an improved photocatalytic activity of NUX-H toward high-concentration(100 mg/L)Cr(VI)reduction.Compared to NU with defect-free structure,the reducing rate of Cr(VI)was increased by 47 times.This work introduced an alternative strategy in terms of designing effi cient photocatalysts for reducing Cr(VI)under ambient conditions.
文摘In this paper,a unit cell of a single-negative metamaterial structure loaded with a meander line and defected ground structure(DGS)is investigated as the principle radiating element of an antenna.The unit cell antenna causes even or odd mode resonances similar to the unit cell structure depending on the orientation of the microstrip feed used to excite the unit cell.However,the orientation which gives low-frequency resonance is considered here.The unit cell antenna is then loaded with a meander line which is parallel to the split bearing side and connects the other two sides orthogonal to the split bearing side.This modified structure excites another mode of resonance at high frequency when a meander line defect is loaded on the metallic ground plane.Specific parameters of the meander line structure,the DGS shape,and the unit cell are optimized to place these two resonances at different frequencies with proper frequency intervals to enhance the bandwidth.Finally,the feed is placed in an offset position for better impedance matching without affecting the bandwidth The compact dimension of the antenna is 0.25λL×0.23λL×0.02λL,whereλL is the free space wavelength with respect to the center frequency of the impedance bandwidth.The proposed antenna is fabricated and measured.Experimental results reveal that the modified design gives monopole like radiation patterns which achieves a fractional operating bandwidth of 26.6%,from 3.26 to 4.26 GHz for|S11|<−10 dB and a pick gain of 1.26 dBi is realized.In addition,the simulated and measured crosspolarization levels are both less than−15 dB in the horizontal plane.
基金a joint National Natural Science Foundation of China-Deutsche Forschungsgemeinschaft(NSFC-DFG) project(NSFC grant 51861135313,DFG JA466/39-1)supported by National Natural Science Foundation of China(21706199)International Science & Technology Cooperation Program of China(2015DFE52870)Jilin Province Science and Technology Development Plan(20180101208JC)。
文摘Three-dimensional(3 D) hybrid of nanocarbons is a very promising way to the high-performance design of electrocatalysis materials.However,sp^(3)-like defect structure,a combination of high strength and conduction of graphene and carbon nanotubes(CNTs) is rarely reported.Herein,3 D neural-like hybrids of graphene(from reduced graphene oxide) and carbon nanotubes(CNTs) have been integrated via sp^(3)-like defect structure by a hydrothermal approach.The sp^(3)-like defect structure endows 3 D nanocarbon hybrids with an enhanced carrier transfer,high structural stability,and electrocatalytic durability.The neural-like structure is shown to demonstrate a cascade effect of charges and significant performances regarding bio-electrocatalysis and lithium-sulfur energy storage.The concept and mechanism of "sp^(3)-like defect structure" are proposed at an atomic/nanoscale to clarify the generation of rational structure as well as the cascade electron transfer.
基金supported by the National Natural Science Foundation of China (50672100)the Provincial Education Department of Jiangxi Province ([2006]313)
文摘As a mixed conductor,LaSr3Fe3O10-δ with triple layer perovskite intergrowth structure can be used as an oxygen separation membrane material and cathode material in solid oxide fuell cells.LaSr3Fe3O10-δ was synthesized via citrate acid route.Iodine titration method was used to determine the average valence of transition metal Fe and oxygen nonstoichiometry δ.Conductivities of LaSr3Fe3O10-δ were measured in the oxygen partial pressure range from 10-2×105 to 1×105 Pa,by Ac four probe method.Seebeck coefficient...
文摘The dielectric properties of ceramics with composition of (Sr 1-x Bi x )TiO 3+x/2 (where x =0.05～0.70 ) were measured at frequency of 1 MHz. The experimental results indicate that the dielectric properties of (Sr 1-x Bi x )TiO 3+x/2 system are greatly varied with an increase of the stoichiometric amounts of Bi 2O 3. The relative permittivity of the solid solutions is high, and the dissipation factor is low. The positron annihilation technique(PAT) was adopted to study the defect structure. An explanation of the dielectric properties of Bi-doped SrTiO 3 ceramics has been suggested in terms of electron-compensation and vacancy or defect-compensation mechanisms and space-charge polarization mechanism.
基金financially supported by the National Natural Science Foundation of China(No.51771131)the Project funded by China Postdoctoral Science Foundation(No.2020M670676)the National Engineering Laboratory for Mobile Source Emission Control Technology(No.NELMS2019B01)。
文摘TiO_(2)(B) nanosheets/GO(graphene oxide) hybrids are considered to be outstanding performance photocatalysts for high efficiency of H_(2) evolution. However, they still suffer severe challenges during the synthetic processes, such as a large amount of the capping agents adhering on the surface and easy occurrence of aggregation. To figure out these obstacles, Ar plasma treatment as a modified method in this study not only enable the TiO_(2)(B) nanosheets distributed uniformly on the GO sheets but also engineer defects within TiO_(2)(B) nanosheets to significantly improve the photocatalytic activity for the water splitting. The hydrogen evolution rate of the TiO_(2)-x(B)/GO sheets is 1.4 times higher compared with that of original TiO_(2)(B)/GO sheets without Ar plasma treatment. The improved photocatalytic properties were owing to the synergetic effects of oxygen vacancies and the heterojunction between GO and TiO_(2)(B), which can promote the visible light utilization and accelerate separation and transportation of photogenerated electron-holes. This study can provide a facile pathway to prepare the two-dimensional hybrid photocatalysts with high photocatalytic H_(2) activity.
文摘The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopotential theory Solitary waves were generated in the sample under mechanical loading. Their interaction with the vacancy complexes was shown to be able to initiate hot spot in that local region of the complexes. Some parameters of the hot spot as well as solitary waves were calculated. The initiation of the hot spot is accompanied with sufficient local structural relaxation.
基金supported by the National Natural Science Foundation of China (21107124, 21337003)the Youth Innovation Promotion Association (2011037)Science Promotion Program of Research Center for Eco-Environmental Sciences, Chinese Academic Sciences (No. 121311RCEES-QN-20130046F)
文摘We describe here a one-step method for the synthesis of Au/TiO2 nanosphere materials,which were formed by layered deposition of multiple anatase TiO2 nanosheets.The Au nanoparticles were stabilized by structural defects in each TiO2 nanosheet,including crystal steps and edges,thereby fixing the Au-TiO2 perimeter interface.Reactant transfer occurred along the gaps between these TiO2 nanosheet layers and in contact with catalytically active sites at the Au-TiO2 interface.The doped Au induced the formation of oxygen vacancies in the Au-TiO2 interface.Such vacancies are essential for generating active oxygen species（-＊O^-） on the TiO2 surface and Ti^3＋ ions in bulk TiO2.These ions can then form Ti^3＋-O^--Ti^4＋species,which are known to enhance the catalytic activity of formaldehyde（HCHO） oxidation.These studies on structural and oxygen vacancy defects in Au/TiO2 samples provide a theoretical foundation for the catalytic mechanism of HCHO oxidation on oxide-supported Au materials.
