The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.A...The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.Accordingly,comprehensive kinetic study by employing thermalgravimetric analysis at various heating rates was presented in this paper.Two main weight loss regions were observed during heating.The initial region corresponded to the dehydration of crystal water,whereas the subsequent region with overlapping peaks involved complex decomposition reactions.The overlapping peaks were separated into two individual reaction peaks and the activation energy of each peak was calculated using isoconversional kinetics methods.The activation energy of peak 1 exhibited a continual increase as the reaction conversion progressed,while that of peak 2 steadily decreased.The optimal kinetic models,identified as belonging to the random nucleation and subsequent growth category,provided valuable insights into the mechanism of the decomposition reactions.Furthermore,the adjustment factor was introduced to reconstruct the kinetic mechanism models,and the reconstructed models described the kinetic mechanism model more accurately for the decomposition reactions.This study enhanced the understanding of the thermochemical behavior and kinetic parameters of the lepidolite sulfation product decomposition reactions,further providing theoretical basis for promoting the selective extraction of lithium.展开更多
To address the deficiency in loss diagnostic methods for turbines working at off-design angles of attack,a novel loss decomposition method suitable for cascade flow with large separation is proposed.The method propose...To address the deficiency in loss diagnostic methods for turbines working at off-design angles of attack,a novel loss decomposition method suitable for cascade flow with large separation is proposed.The method proposed has the following advantages over existing methods:(A)It enables refined loss decomposition for cascade flows,capable of identifying the spatial range of specific regions such as shear layers and backflow regions,thereby obtaining the loss characteristics of these regions.(B)The region identification criteria in this method have clear physical meanings,rather than relying on arbitrary area division.(C)The method has good applicability and is suitable for cascade flows under various angles of attack.Validation shows that this method achieves satisfactory results.Based on this method,the loss mechanisms of a low-pressure turbine cascade at a low Reynolds number of 4.3×10^(4)and angles of attack of-5°,-20°,and-45°are investigated using Large Eddy Simulations(LESs).Entropy analysis quantitatively demonstrates significant differences in the composition of losses among flow regions,due to their different flow characteristics.From the perspective of flow regions,wake loss dominates total loss,while loss in backflow region is negligible.Furthermore,the variation mechanisms of loss with incidence differ among different flow regions.展开更多
A novel process was developed for the decomposition of vanadium slag using KOH sub-molten salt under ambient pressure, and the effects of reaction temperature, alkali-to-ore mass ratios, particle size, and stirring sp...A novel process was developed for the decomposition of vanadium slag using KOH sub-molten salt under ambient pressure, and the effects of reaction temperature, alkali-to-ore mass ratios, particle size, and stirring speed on vanadium and chromium extraction were studied. The results suggest that the reaction temperature and KOH-to-ore mass ratio are more influential factors for the extraction of vanadium and chromium. Under the optimal reaction conditions （temperature 180 °C, initial KOH-to-ore mass ratio 4：1, stirring speed 700 r/min, gas flow 1 L/min, and reaction time 300 min）, vanadium and chromium extraction rates can reach up to 95% and 90%, respectively. Kinetics analysis results show that the decomposing process of vanadium slag in KOH sub-molten salt can be well interpreted by the shrinking core model under internal diffusion control. The apparent activation energies for vanadium and chromium are 40.54 and 50.27 kJ/mol, respectively.展开更多
The fluorescence spectrum of the ether-water solution excited by the ultraviolet light with the wavelength of 245 nm is experimentally detected. Based on the second derivative analysis, the fluorescence spectrum of th...The fluorescence spectrum of the ether-water solution excited by the ultraviolet light with the wavelength of 245 nm is experimentally detected. Based on the second derivative analysis, the fluorescence spectrum of the ether-water solution is used as Gaussian decomposition and seven Gaussian spectral lines are obtained. The center wavelength, the peak intensity and the half peak bandwidth of each Gaussian spectral line are measured, and the multi-peak fitting is made by using Gaussian primitive parameters. The highest and the lowest oscillation energy level differences in the ground state of each Gaussian spectrum are calculated. It is found that there are seven types of luminescent association molecules formed by ether and water molecules in different configurations existed in the solution. The location of each optimum absorption wavelength and the half peak bandwidth of the Gaussian spectral line is different. The energy level difference with the central wavelength of 304 nm attains the maximum value The result can contribute to the study of the molecular association in ether-water solution.展开更多
By dint of the summer precipitation data from 21 stations in the Dongting Lake region during 1960-2008 and the sea surface temperature(SST) data from NOAA,the spatial and temporal distributions of summer precipitation...By dint of the summer precipitation data from 21 stations in the Dongting Lake region during 1960-2008 and the sea surface temperature(SST) data from NOAA,the spatial and temporal distributions of summer precipitation and their correlations with SST are analyzed.The coupling relationship between the anomalous distribution in summer precipitation and the variation of SST has between studied with the Singular Value Decomposition(SVD) analysis.The increase or decrease of summer precipitation in the Dongting Lake region is closely associated with the SST anomalies in three key regions.The variation of SST in the three key regions has been proved to be a significant previous signal to anomaly of summer rainfall in Dongting region.展开更多
Objective] The alm was to survey 10 characters of 8 fresh edibIe soy-bean varieties, analyze maln Ioading factors using principal component analysis, and estabIish muItipIe regression equation on fresh pod yield. [Met...Objective] The alm was to survey 10 characters of 8 fresh edibIe soy-bean varieties, analyze maln Ioading factors using principal component analysis, and estabIish muItipIe regression equation on fresh pod yield. [Methods] Through princi-pal component analysis on 10 characters of 8 fresh edibIe soybean varieties, char-acters reIated to fresh pod yield of fresh edibIe soybean were cIarified. [Results] Af-ter the principal components analysis, pod weight per pIant, 100-seed weight and pod number per pIant of fresh edibIe soybean were chosen to study their reIation with the yield of fresh edibIe soybean, moreover, it was demonstrated that the reIa-tion was Iinear reIation, thus it was suitabIe for muItivariate regression analysis. Fi-nal y, the mathematical expression formuIa about fresh pod yield was estabIished. [Conclusions] There were three characters affecting fresh pod yield, nameIy, pod weight per pIant, 100-seed weight and pod number per pIant, the mathematical equation was y=816.732＋4.145X6-0.718X8-0.985X9 （X6： pod weight per pIant; X8： 100-seed weight; X9： pod number per pIant）.展开更多
Vibration signals from diesel engine contain many different components mainly caused by combustion and mechanism operations,several blind source separation techniques are available for decomposing the signal into its ...Vibration signals from diesel engine contain many different components mainly caused by combustion and mechanism operations,several blind source separation techniques are available for decomposing the signal into its components in the case of multichannel measurements,such as independent component analysis（ICA）.However,the source separation of vibration signal from single-channel is impossible.In order to study the source separation from single-channel signal for the purpose of source extraction,the combination method of empirical mode decomposition（EMD） and ICA is proposed in diesel engine signal processing.The performance of the described methods of EMD-wavelet and EMD-ICA in vibration signal application is compared,and the results show that EMD-ICA method outperforms the other,and overcomes the drawback of ICA in the case of single-channel measurement.The independent source signal components can be separated and identified effectively from one-channel measurement by EMD-ICA.Hence,EMD-ICA improves the extraction and identification abilities of source signals from diesel engine vibration measurements.展开更多
Analysis of carbon emission mechanism based on regional perspectives is an im- portant research method capable of achieving energy savings and emission reductions. Xin- jiang, an important Chinese energy production ba...Analysis of carbon emission mechanism based on regional perspectives is an im- portant research method capable of achieving energy savings and emission reductions. Xin- jiang, an important Chinese energy production base, is currently going through a period of strategic opportunities for rapid development. Ensuring stable socio-economic development while achieving energy savings and meeting emission reductions targets, is the key issue currently facing the region. This paper is based on the input-output theory, and conducts a structural decomposition analysis on the factors affecting energy-related carbon emissions in Xinjiang from 1997 to 2007; this analysis employs a hybrid input-output analysis framework of ＂energy - economy - carbon emissions＂. （1） Xinjiang＇s carbon emissions from energy con- sumption increased from 20.70 million tons in 1997 to 40.34 million tons in 2007; carbon emissions growth was mainly concentrated in the production and processing of energy re- sources, the mining of mineral resources, and the processing industry. （2） The analysis of the direct effects of the influencing factors on carbon emissions showed that the change in per capita GDP, the final demand structure, the population scale, and the production structure were the important factors causing an increase in carbon emissions, while the decrease in carbon emission intensity during this period was the important influencing factor in stopping the growth of carbon emissions. This showed that while the sizes of Xinjiang＇s economy and population were growing, the economic structure had not been effectively optimized and the production technology had not been efficiently improved, resulting in a rapid growth of carbon emissions from energy consumption. （3） The analysis of the indirect effects of the influencing factors of carbon emission showed that the inter-provincial export, fixed capital formation, and the consumption by urban residents had significant influence on the changes in carbon emissions from energy consumption in Xinjiang. （4） The growth of investments in fixed assets of carbon intensive industry sectors, in addition to the growth of inter-provincial exports ofenergy resource products, makes the transfer effect of inter-provincial ＂embodied carbon＂ very significant.展开更多
A direct linear discriminant analysis algorithm based on economic singular value decomposition （DLDA/ESVD） is proposed to address the computationally complex problem of the conventional DLDA algorithm, which directl...A direct linear discriminant analysis algorithm based on economic singular value decomposition （DLDA/ESVD） is proposed to address the computationally complex problem of the conventional DLDA algorithm, which directly uses ESVD to reduce dimension and extract eigenvectors corresponding to nonzero eigenvalues. Then a DLDA algorithm based on column pivoting orthogonal triangular （QR） decomposition and ESVD （DLDA/QR-ESVD） is proposed to improve the performance of the DLDA/ESVD algorithm by processing a high-dimensional low rank matrix, which uses column pivoting QR decomposition to reduce dimension and ESVD to extract eigenvectors corresponding to nonzero eigenvalues. The experimental results on ORL, FERET and YALE face databases show that the proposed two algorithms can achieve almost the same performance and outperform the conventional DLDA algorithm in terms of computational complexity and training time. In addition, the experimental results on random data matrices show that the DLDA/QR-ESVD algorithm achieves better performance than the DLDA/ESVD algorithm by processing high-dimensional low rank matrices.展开更多
One of the important issues in the system identification and the spectrum analysis is the frequency resolution, i.e., the capability of distinguishing between two or more closely spaced frequency components. In the mo...One of the important issues in the system identification and the spectrum analysis is the frequency resolution, i.e., the capability of distinguishing between two or more closely spaced frequency components. In the modal identification by the empirical mode decomposition （EMD） method, because of the separating capability of the method, it is still a challenge to consistently and reliably identify the parameters of structures of which modes are not well separated. A new method is introduced to generate the intrin- sic mode functions （IMFs） through the filtering algorithm based on the wavelet packet decomposition （GIFWPD）. In this paper, it is demonstrated that the CIFWPD method alone has a good capability of separating close modes, even under the severe condition beyond the critical frequency ratio limit which makes it impossible to separate two closely spaced harmonics by the EMD method. However, the GIFWPD-only based method is impelled to use a very fine sampling frequency with consequent prohibitive computational costs. Therefore, in order to decrease the computational load by reducing the amount of samples and improve the effectiveness of separation by increasing the frequency ratio, the present paper uses a combination of the complex envelope displacement analysis （CEDA） and the GIFWPD method. For the validation, two examples from the previous works are taken to show the results obtained by the GIFWPD-only based method and by combining the CEDA with the GIFWPD method.展开更多
A hierarchical structural decomposition analysis(SDA) model has been developed based on process-level input-output(I-O) tables to analyze the drivers of energy consumption changes in an integrated steel plant during 2...A hierarchical structural decomposition analysis(SDA) model has been developed based on process-level input-output(I-O) tables to analyze the drivers of energy consumption changes in an integrated steel plant during 2011-2013. By combining the principle of hierarchical decomposition into D&L method, a hierarchical decomposition model for multilevel SDA is obtained. The developed hierarchical IO-SDA model would provide consistent results and need less computation effort compared with the traditional SDA model. The decomposition results of the steel plant suggest that the technology improvement and reduced steel final demand are two major reasons for declined total energy consumption. The technical improvements of blast furnaces, basic oxygen furnaces, the power plant and the by-products utilization level have contributed mostly in reducing energy consumption. A major retrofit of ancillary process units and solving fuel substitution problem in the sinter plant and blast furnace are important for further energy saving. Besides the empirical results, this work also discussed that why and how hierarchical SDA can be applied in a process-level decomposition analysis of aggregated indicators.展开更多
The reduced-order model （ROM） for the two-dimensional supersonic cavity flow based on proper orthogonal decomposition （POD） and Galerkin projection is investigated. Presently, popular ROMs in cavity flows are base...The reduced-order model （ROM） for the two-dimensional supersonic cavity flow based on proper orthogonal decomposition （POD） and Galerkin projection is investigated. Presently, popular ROMs in cavity flows are based on an isentropic assumption, valid only for flows at low or moderate Mach numbers. A new ROM is constructed involving primitive variables of the fully compressible Navier-Stokes （N-S） equations, which is suitable for flows at high Mach numbers. Compared with the direct numerical simulation （DNS） results, the proposed model predicts flow dynamics （e.g., dominant frequency and amplitude） accurately for supersonic cavity flows, and is robust. The comparison between the present transient flow fields and those of the DNS shows that the proposed ROM can capture self-sustained oscillations of a shear layer. In addition, the present model reduction method can be easily extended to other supersonic flows.展开更多
Direct numerical simulation based on OpenFOAM is carried out for two-dimensional RayleighBénard( RB) convection in a square domain at high Rayleigh number of 107 and Pr = 0.71. Proper orthogonal decomposition( PO...Direct numerical simulation based on OpenFOAM is carried out for two-dimensional RayleighBénard( RB) convection in a square domain at high Rayleigh number of 107 and Pr = 0.71. Proper orthogonal decomposition( POD) is used to analyze the flow and temperature characteristics from POD energy spectrum and eigenmodes. The results show that the energy spectrum converges fast and the scale of vortex structures captured by eigenmodes becomes smaller as the eigenmode order increases. Meanwhile,a low-dimensional model( LDM) for RB convection is derived based on POD eigenmodes used as a basis of Galerkin project of Navier-Stokes-Boussinesq equations. LDM is built based on different number of eigenmodes and through the analysis of phase portraits,streamline and isothermal predicted by LDM,it is suggested that the error between LDM and DNS is still large.展开更多
A combination of the lattice Boltzmann method and the most recently developed dynamic mode decomposition is proposed for stability analysis. The simulations are performed on a graphical processing unit. Stability of t...A combination of the lattice Boltzmann method and the most recently developed dynamic mode decomposition is proposed for stability analysis. The simulations are performed on a graphical processing unit. Stability of the flow past a cylinder at supercritical state, Re = 50, is studied by the combination for both the exponential growing and the limit cycle regimes. The Ritz values, energy spectrum, and modes for both regimes are presented and compared with the Koopman eigenvalues. For harmonic-like periodic flow in the limit cycle, global analysis from the combination gives the same results as those from the Koopman analysis. For transient flow as in the exponential growth regime, the combination can provide more reasonable results. It is demonstrated that the combination of the lattice Boltzmann method and the dynamic mode decomposition is powerful and can be used for stability analysis for more complex flows.展开更多
Material dematerialization is a basic approach to reduce the pressure on the resources and environment and to realize the sustainable development. The material flow analysis and decomposition method are used to calcul...Material dematerialization is a basic approach to reduce the pressure on the resources and environment and to realize the sustainable development. The material flow analysis and decomposition method are used to calculate the direct material input (DMI) of 14 typical mining cities in Northeast China in 1995–2004 and to analyze the demateri- alization and its driving factors in the different types of mining cities oriented by coal, petroleum, metallurgy and multi-resources. The results are as follows: 1) from 1995 to 2006, the increase rates of the DMI and the material input intensity of mining cities declined following the order of multi-resources, metallurgy, coal, and petroleum cities, and the material utilizing efficiency did following the order of petroleum, coal, metallurgy, and multi-resources cities; 2) during the research period, all the kinds of mining cities were in the situation of weak sustainable development in most years; 3) the pressure on resources and environment in the multi-resources cities was the most serious; 4) the petro- leum cities showed the strong trend of sustainable development; and 5) in recent years, the driving function of eco- nomic development for material consuming has continuously strengthened and the controlling function of material utilizing efficiency for it has weakened. The key approaches to promote the development of circular economy of min- ing cities in Northeast China are put forward in the following aspects: 1) to strengthen the research and development of the technique of resources’ cycling utilization, 2) to improve the utilizing efficiency of resources, and 3) to carry out the auditing system of resources utilization.展开更多
This paper clarifies the essence of the significance test of singular value decomposition analysis （SVD）, and investigates four rules for testing the significance of coupled modes of SVD, including parallel analysis...This paper clarifies the essence of the significance test of singular value decomposition analysis （SVD）, and investigates four rules for testing the significance of coupled modes of SVD, including parallel analysis, nonparametric bootstrap, random-phase test, and a new rule named modified parallel analysis. A numerical experiment is conducted to quantitatively compare the performance of the four rules in judging whether a coupled mode of SVD is significant as parameters such as the sample size, the number of grid points, and the signal-to-noise ratio vary. The results show that the four rules perform better with lower ratio of the number of grid points to sample size. Modified parallel analysis and nonparametric bootstrap perform best to abandon the spurious coupled modes, but the latter is better than the former to retain the significant coupled modes when the sample size is not much larger than the number of grid points. Parallel analysis and random-phase test are robust to abandon the spurious coupled modes only when either （1） the observations at the grid points are spatially uncorrelated, or （2） the coupled signal is very strong for parallel analysis and is not weak for random-phase test. The reasons affecting the accuracy of the test rules are discussed.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.52034002 and U2202254)the Fundamental Research Funds for the Central Universities,China(No.FRF-TT-19-001)。
文摘The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.Accordingly,comprehensive kinetic study by employing thermalgravimetric analysis at various heating rates was presented in this paper.Two main weight loss regions were observed during heating.The initial region corresponded to the dehydration of crystal water,whereas the subsequent region with overlapping peaks involved complex decomposition reactions.The overlapping peaks were separated into two individual reaction peaks and the activation energy of each peak was calculated using isoconversional kinetics methods.The activation energy of peak 1 exhibited a continual increase as the reaction conversion progressed,while that of peak 2 steadily decreased.The optimal kinetic models,identified as belonging to the random nucleation and subsequent growth category,provided valuable insights into the mechanism of the decomposition reactions.Furthermore,the adjustment factor was introduced to reconstruct the kinetic mechanism models,and the reconstructed models described the kinetic mechanism model more accurately for the decomposition reactions.This study enhanced the understanding of the thermochemical behavior and kinetic parameters of the lepidolite sulfation product decomposition reactions,further providing theoretical basis for promoting the selective extraction of lithium.
基金co-supported by the National Natural Science Foundation of China(No.52176033)the National Science and Technology Major Project,China(No.J2019-II-0012-0032)the Science Center for Gas Turbine Project,China(No.P2022-B-II-009-001)。
文摘To address the deficiency in loss diagnostic methods for turbines working at off-design angles of attack,a novel loss decomposition method suitable for cascade flow with large separation is proposed.The method proposed has the following advantages over existing methods:(A)It enables refined loss decomposition for cascade flows,capable of identifying the spatial range of specific regions such as shear layers and backflow regions,thereby obtaining the loss characteristics of these regions.(B)The region identification criteria in this method have clear physical meanings,rather than relying on arbitrary area division.(C)The method has good applicability and is suitable for cascade flows under various angles of attack.Validation shows that this method achieves satisfactory results.Based on this method,the loss mechanisms of a low-pressure turbine cascade at a low Reynolds number of 4.3×10^(4)and angles of attack of-5°,-20°,and-45°are investigated using Large Eddy Simulations(LESs).Entropy analysis quantitatively demonstrates significant differences in the composition of losses among flow regions,due to their different flow characteristics.From the perspective of flow regions,wake loss dominates total loss,while loss in backflow region is negligible.Furthermore,the variation mechanisms of loss with incidence differ among different flow regions.
基金Project(2013CB632605)supported by the National Basic Research Development Program of ChinaProjects(51274178,51274179)supported by the National Natural Science Foundation of China
文摘A novel process was developed for the decomposition of vanadium slag using KOH sub-molten salt under ambient pressure, and the effects of reaction temperature, alkali-to-ore mass ratios, particle size, and stirring speed on vanadium and chromium extraction were studied. The results suggest that the reaction temperature and KOH-to-ore mass ratio are more influential factors for the extraction of vanadium and chromium. Under the optimal reaction conditions （temperature 180 °C, initial KOH-to-ore mass ratio 4：1, stirring speed 700 r/min, gas flow 1 L/min, and reaction time 300 min）, vanadium and chromium extraction rates can reach up to 95% and 90%, respectively. Kinetics analysis results show that the decomposing process of vanadium slag in KOH sub-molten salt can be well interpreted by the shrinking core model under internal diffusion control. The apparent activation energies for vanadium and chromium are 40.54 and 50.27 kJ/mol, respectively.
基金Supported by the Natural Science Foundation of Jiangsu Province(BK2007204)the Natural Sci-ence Foundation of Educational Department of Jiangsu Province(07KJD140208)~~
文摘The fluorescence spectrum of the ether-water solution excited by the ultraviolet light with the wavelength of 245 nm is experimentally detected. Based on the second derivative analysis, the fluorescence spectrum of the ether-water solution is used as Gaussian decomposition and seven Gaussian spectral lines are obtained. The center wavelength, the peak intensity and the half peak bandwidth of each Gaussian spectral line are measured, and the multi-peak fitting is made by using Gaussian primitive parameters. The highest and the lowest oscillation energy level differences in the ground state of each Gaussian spectrum are calculated. It is found that there are seven types of luminescent association molecules formed by ether and water molecules in different configurations existed in the solution. The location of each optimum absorption wavelength and the half peak bandwidth of the Gaussian spectral line is different. The energy level difference with the central wavelength of 304 nm attains the maximum value The result can contribute to the study of the molecular association in ether-water solution.
基金Supported by The Special Foundation of Chinese Meteorological Bureau Climate Changes Program(200920)The Special Foundation of Hunan Major Scientific and Technological Research Program(2008FJ1006)~~
文摘By dint of the summer precipitation data from 21 stations in the Dongting Lake region during 1960-2008 and the sea surface temperature(SST) data from NOAA,the spatial and temporal distributions of summer precipitation and their correlations with SST are analyzed.The coupling relationship between the anomalous distribution in summer precipitation and the variation of SST has between studied with the Singular Value Decomposition(SVD) analysis.The increase or decrease of summer precipitation in the Dongting Lake region is closely associated with the SST anomalies in three key regions.The variation of SST in the three key regions has been proved to be a significant previous signal to anomaly of summer rainfall in Dongting region.
文摘Objective] The alm was to survey 10 characters of 8 fresh edibIe soy-bean varieties, analyze maln Ioading factors using principal component analysis, and estabIish muItipIe regression equation on fresh pod yield. [Methods] Through princi-pal component analysis on 10 characters of 8 fresh edibIe soybean varieties, char-acters reIated to fresh pod yield of fresh edibIe soybean were cIarified. [Results] Af-ter the principal components analysis, pod weight per pIant, 100-seed weight and pod number per pIant of fresh edibIe soybean were chosen to study their reIation with the yield of fresh edibIe soybean, moreover, it was demonstrated that the reIa-tion was Iinear reIation, thus it was suitabIe for muItivariate regression analysis. Fi-nal y, the mathematical expression formuIa about fresh pod yield was estabIished. [Conclusions] There were three characters affecting fresh pod yield, nameIy, pod weight per pIant, 100-seed weight and pod number per pIant, the mathematical equation was y=816.732＋4.145X6-0.718X8-0.985X9 （X6： pod weight per pIant; X8： 100-seed weight; X9： pod number per pIant）.
基金supported by National Natural Science Foundation of China (Grant No. 50975192)Tianjin Municipal Natural Science Foundation of China (Grant No. 10YFJZJC14100)
文摘Vibration signals from diesel engine contain many different components mainly caused by combustion and mechanism operations,several blind source separation techniques are available for decomposing the signal into its components in the case of multichannel measurements,such as independent component analysis（ICA）.However,the source separation of vibration signal from single-channel is impossible.In order to study the source separation from single-channel signal for the purpose of source extraction,the combination method of empirical mode decomposition（EMD） and ICA is proposed in diesel engine signal processing.The performance of the described methods of EMD-wavelet and EMD-ICA in vibration signal application is compared,and the results show that EMD-ICA method outperforms the other,and overcomes the drawback of ICA in the case of single-channel measurement.The independent source signal components can be separated and identified effectively from one-channel measurement by EMD-ICA.Hence,EMD-ICA improves the extraction and identification abilities of source signals from diesel engine vibration measurements.
基金National Natural Science Foundation of China, No.41501144 National Key Research and Development Program, No.2016YFA0602801+2 种基金 Guangdong Academy of Sciences Youth Science Foundation, No.qn.ij201501 High-level Leading Talent Introduction Program of GDAS, No.2016GDASRC-0101 Scientific Platform and Innovation Capability Construction Program of GDAS, No.2016GDASPT-0210.
文摘Analysis of carbon emission mechanism based on regional perspectives is an im- portant research method capable of achieving energy savings and emission reductions. Xin- jiang, an important Chinese energy production base, is currently going through a period of strategic opportunities for rapid development. Ensuring stable socio-economic development while achieving energy savings and meeting emission reductions targets, is the key issue currently facing the region. This paper is based on the input-output theory, and conducts a structural decomposition analysis on the factors affecting energy-related carbon emissions in Xinjiang from 1997 to 2007; this analysis employs a hybrid input-output analysis framework of ＂energy - economy - carbon emissions＂. （1） Xinjiang＇s carbon emissions from energy con- sumption increased from 20.70 million tons in 1997 to 40.34 million tons in 2007; carbon emissions growth was mainly concentrated in the production and processing of energy re- sources, the mining of mineral resources, and the processing industry. （2） The analysis of the direct effects of the influencing factors on carbon emissions showed that the change in per capita GDP, the final demand structure, the population scale, and the production structure were the important factors causing an increase in carbon emissions, while the decrease in carbon emission intensity during this period was the important influencing factor in stopping the growth of carbon emissions. This showed that while the sizes of Xinjiang＇s economy and population were growing, the economic structure had not been effectively optimized and the production technology had not been efficiently improved, resulting in a rapid growth of carbon emissions from energy consumption. （3） The analysis of the indirect effects of the influencing factors of carbon emission showed that the inter-provincial export, fixed capital formation, and the consumption by urban residents had significant influence on the changes in carbon emissions from energy consumption in Xinjiang. （4） The growth of investments in fixed assets of carbon intensive industry sectors, in addition to the growth of inter-provincial exports ofenergy resource products, makes the transfer effect of inter-provincial ＂embodied carbon＂ very significant.
基金The National Natural Science Foundation of China (No.61374194)
文摘A direct linear discriminant analysis algorithm based on economic singular value decomposition （DLDA/ESVD） is proposed to address the computationally complex problem of the conventional DLDA algorithm, which directly uses ESVD to reduce dimension and extract eigenvectors corresponding to nonzero eigenvalues. Then a DLDA algorithm based on column pivoting orthogonal triangular （QR） decomposition and ESVD （DLDA/QR-ESVD） is proposed to improve the performance of the DLDA/ESVD algorithm by processing a high-dimensional low rank matrix, which uses column pivoting QR decomposition to reduce dimension and ESVD to extract eigenvectors corresponding to nonzero eigenvalues. The experimental results on ORL, FERET and YALE face databases show that the proposed two algorithms can achieve almost the same performance and outperform the conventional DLDA algorithm in terms of computational complexity and training time. In addition, the experimental results on random data matrices show that the DLDA/QR-ESVD algorithm achieves better performance than the DLDA/ESVD algorithm by processing high-dimensional low rank matrices.
基金supported by the State Key Program of National Natural Science of China (No. 11232009)the Shanghai Leading Academic Discipline Project (No. S30106)
文摘One of the important issues in the system identification and the spectrum analysis is the frequency resolution, i.e., the capability of distinguishing between two or more closely spaced frequency components. In the modal identification by the empirical mode decomposition （EMD） method, because of the separating capability of the method, it is still a challenge to consistently and reliably identify the parameters of structures of which modes are not well separated. A new method is introduced to generate the intrin- sic mode functions （IMFs） through the filtering algorithm based on the wavelet packet decomposition （GIFWPD）. In this paper, it is demonstrated that the CIFWPD method alone has a good capability of separating close modes, even under the severe condition beyond the critical frequency ratio limit which makes it impossible to separate two closely spaced harmonics by the EMD method. However, the GIFWPD-only based method is impelled to use a very fine sampling frequency with consequent prohibitive computational costs. Therefore, in order to decrease the computational load by reducing the amount of samples and improve the effectiveness of separation by increasing the frequency ratio, the present paper uses a combination of the complex envelope displacement analysis （CEDA） and the GIFWPD method. For the validation, two examples from the previous works are taken to show the results obtained by the GIFWPD-only based method and by combining the CEDA with the GIFWPD method.
基金Project(2012GK2025)supported by Science-Technology Plan Foundation of Hunan Province,ChinaProject(2013zzts039)supported by the Fundamental Research Funds for Central South University,China
文摘A hierarchical structural decomposition analysis(SDA) model has been developed based on process-level input-output(I-O) tables to analyze the drivers of energy consumption changes in an integrated steel plant during 2011-2013. By combining the principle of hierarchical decomposition into D&L method, a hierarchical decomposition model for multilevel SDA is obtained. The developed hierarchical IO-SDA model would provide consistent results and need less computation effort compared with the traditional SDA model. The decomposition results of the steel plant suggest that the technology improvement and reduced steel final demand are two major reasons for declined total energy consumption. The technical improvements of blast furnaces, basic oxygen furnaces, the power plant and the by-products utilization level have contributed mostly in reducing energy consumption. A major retrofit of ancillary process units and solving fuel substitution problem in the sinter plant and blast furnace are important for further energy saving. Besides the empirical results, this work also discussed that why and how hierarchical SDA can be applied in a process-level decomposition analysis of aggregated indicators.
基金Project supported by the National Natural Science Foundation of China(Nos.11232011,11402262,11572314,and 11621202)
文摘The reduced-order model （ROM） for the two-dimensional supersonic cavity flow based on proper orthogonal decomposition （POD） and Galerkin projection is investigated. Presently, popular ROMs in cavity flows are based on an isentropic assumption, valid only for flows at low or moderate Mach numbers. A new ROM is constructed involving primitive variables of the fully compressible Navier-Stokes （N-S） equations, which is suitable for flows at high Mach numbers. Compared with the direct numerical simulation （DNS） results, the proposed model predicts flow dynamics （e.g., dominant frequency and amplitude） accurately for supersonic cavity flows, and is robust. The comparison between the present transient flow fields and those of the DNS shows that the proposed ROM can capture self-sustained oscillations of a shear layer. In addition, the present model reduction method can be easily extended to other supersonic flows.
基金Sponsored by the National Natural Science Foundation of China(Grant o.51576051)
文摘Direct numerical simulation based on OpenFOAM is carried out for two-dimensional RayleighBénard( RB) convection in a square domain at high Rayleigh number of 107 and Pr = 0.71. Proper orthogonal decomposition( POD) is used to analyze the flow and temperature characteristics from POD energy spectrum and eigenmodes. The results show that the energy spectrum converges fast and the scale of vortex structures captured by eigenmodes becomes smaller as the eigenmode order increases. Meanwhile,a low-dimensional model( LDM) for RB convection is derived based on POD eigenmodes used as a basis of Galerkin project of Navier-Stokes-Boussinesq equations. LDM is built based on different number of eigenmodes and through the analysis of phase portraits,streamline and isothermal predicted by LDM,it is suggested that the error between LDM and DNS is still large.
文摘A combination of the lattice Boltzmann method and the most recently developed dynamic mode decomposition is proposed for stability analysis. The simulations are performed on a graphical processing unit. Stability of the flow past a cylinder at supercritical state, Re = 50, is studied by the combination for both the exponential growing and the limit cycle regimes. The Ritz values, energy spectrum, and modes for both regimes are presented and compared with the Koopman eigenvalues. For harmonic-like periodic flow in the limit cycle, global analysis from the combination gives the same results as those from the Koopman analysis. For transient flow as in the exponential growth regime, the combination can provide more reasonable results. It is demonstrated that the combination of the lattice Boltzmann method and the dynamic mode decomposition is powerful and can be used for stability analysis for more complex flows.
基金Under the auspices of Key Program of National Natural Science Foundation of China (No. 40635030)National Natu-ral Science Foundation of China (No. 40571041)
文摘Material dematerialization is a basic approach to reduce the pressure on the resources and environment and to realize the sustainable development. The material flow analysis and decomposition method are used to calculate the direct material input (DMI) of 14 typical mining cities in Northeast China in 1995–2004 and to analyze the demateri- alization and its driving factors in the different types of mining cities oriented by coal, petroleum, metallurgy and multi-resources. The results are as follows: 1) from 1995 to 2006, the increase rates of the DMI and the material input intensity of mining cities declined following the order of multi-resources, metallurgy, coal, and petroleum cities, and the material utilizing efficiency did following the order of petroleum, coal, metallurgy, and multi-resources cities; 2) during the research period, all the kinds of mining cities were in the situation of weak sustainable development in most years; 3) the pressure on resources and environment in the multi-resources cities was the most serious; 4) the petro- leum cities showed the strong trend of sustainable development; and 5) in recent years, the driving function of eco- nomic development for material consuming has continuously strengthened and the controlling function of material utilizing efficiency for it has weakened. The key approaches to promote the development of circular economy of min- ing cities in Northeast China are put forward in the following aspects: 1) to strengthen the research and development of the technique of resources’ cycling utilization, 2) to improve the utilizing efficiency of resources, and 3) to carry out the auditing system of resources utilization.
基金This work was supported by the National Natural Science Foundation of China under Grant No. 40233027.
文摘This paper clarifies the essence of the significance test of singular value decomposition analysis （SVD）, and investigates four rules for testing the significance of coupled modes of SVD, including parallel analysis, nonparametric bootstrap, random-phase test, and a new rule named modified parallel analysis. A numerical experiment is conducted to quantitatively compare the performance of the four rules in judging whether a coupled mode of SVD is significant as parameters such as the sample size, the number of grid points, and the signal-to-noise ratio vary. The results show that the four rules perform better with lower ratio of the number of grid points to sample size. Modified parallel analysis and nonparametric bootstrap perform best to abandon the spurious coupled modes, but the latter is better than the former to retain the significant coupled modes when the sample size is not much larger than the number of grid points. Parallel analysis and random-phase test are robust to abandon the spurious coupled modes only when either （1） the observations at the grid points are spatially uncorrelated, or （2） the coupled signal is very strong for parallel analysis and is not weak for random-phase test. The reasons affecting the accuracy of the test rules are discussed.
