An application of an unequal-weighted multi-objective decision making method in site selection of a waste sanitary landfill is discussed. The eight factors, which affected possible options, were: size and capacity of ...An application of an unequal-weighted multi-objective decision making method in site selection of a waste sanitary landfill is discussed. The eight factors, which affected possible options, were: size and capacity of the landfill, permeability of the stratum, the average difference in elevation between the groundwater level and the bottom of the landfill pit, quality and source of clay, the quality grade of the landfill site, the effect of landfill engineering on nearby residents, distance to the water supply and the water source as well as the cost of construction and waste transport. These are determined, given the conditions of the geological environment, the need for environmental protection and landfill site construction and transportation related to the design and operation of a sanitary landfill. The weights of the eight factors were further investigated based on the difference in their relevance. Combined with practical experience from Xuzhou city (Jiangsu province, China), the objectives, effects and weights of grey decision-making were deter- mined and the process and outcome of the landfill site selection are stated in detail. The decision-making results have been proven to be acceptable and correct. As we show, unequal-weighted multi-objective grey situation decision-mak- ing is characterized by easy calculations and good maneuverability when used in landfill site selection. The number of factors (objectives) affecting the outcome and the quantitative method of qualitative indices can be adjusted on the basis of concrete conditions in landfill site selection. Therefore, unequal-weighted multi-objective grey situation decision making is a feasible method in selecting landfill sites which offers a reference method for landfill site selection else- where. It is a useful, rational and scientific exploration in the choice of`a landfill site.展开更多
This paper explores the decision-making mechanism of the consuming behavior hidden behind the sudden popularity of the Oriental Selection Company in terms of the mental accounting theory.Firstly,according to the“Non-...This paper explores the decision-making mechanism of the consuming behavior hidden behind the sudden popularity of the Oriental Selection Company in terms of the mental accounting theory.Firstly,according to the“Non-alternative”characteristics of mental accounting,this paper expounds how the strategy of the bilingual live-streaming of Oriental Selection promoters stimulates consumers’desire to buy the advertised products and services whilst using the utility theory of mental accounting to analyze how Oriental Selection promoters improve consumers’acquisition utility and total utility.Secondly,we sum up the successful experiences of Oriental Selection:The live-streaming industry should apply the theory of mental accounting in effectively overcoming the shortcomings of the live-streamed marketing by stimulating consumers’desire and influencing their decision-making behavior through the streaming of content that triggers them to make purchases.This is achievable by abandoning the traditional ways of loudly urging consumers to buy goods.Finally,this paper puts forward some suggestions on how to use the mental accounting theory in promoting sustainable consumption and points out the prospects for Oriental Selection.展开更多
According to the Total Cost of Ownership concept (TOCO), the selection criterion of international procurement suppliers can be classified into two levels, namely Macroeconomic decision-making level and Microeconomic d...According to the Total Cost of Ownership concept (TOCO), the selection criterion of international procurement suppliers can be classified into two levels, namely Macroeconomic decision-making level and Microeconomic decision-making level. In this paper, a new quantitative method is put forward to accomplish the task of total assessment on the Microeconomic level which analyses all of the quantitative and qualitative factors with regard to the supplier selection. A Microsoft Excel based new application kit named TOCO Total Assessment Tool is introduced. It can calculate the direct cost and the indirect cost conveniently and can help to evaluate the performance of candidate suppliers. To use the tool, the first module called Total Cost Analysis Module is introduced to calculate the total cost of supplier selection, and then the second module named Supplier Evaluation Module is used to evaluate the performance of each supplier. Finally, the results from these two modules are transferred to the Final Comparison Module to get the final decision-making results. In this paper, the supplier selection related factors are discussed; the method of using the tool is illustrated in detail. It is shown that scientific usage of the TOCO Total Assessment Tool can make the decision-making processes of supplier selection in international procurement transparent, easily calculated, and objective. At the end, a practical case is given to clarify the procedure of using the tool.展开更多
Evaluating and selecting players to suit football clubs and decision-makers (coaches, managers, technical, and medical staff) is a difficult process from a managerial-financial and sporting perspective. Football is a ...Evaluating and selecting players to suit football clubs and decision-makers (coaches, managers, technical, and medical staff) is a difficult process from a managerial-financial and sporting perspective. Football is a highly competitive sport where sponsors and fans are attracted by success. The most successful players, based on their characteristics (criteria and sub-criteria), can influence the outcome of a football game at any given time. Consequently, the D-day of selection should employ a more appropriate approach to human resource management. To effectively address this issue, a detailed study and analysis of the available literature are needed to assist practitioners and professionals in making decisions about football player selection and hiring. Peer-reviewed journals were selected for collecting published papers between 2018 and 2023. A total of 66 relevant articles (journal articles, conference articles, book sections, and review articles) were selected for evaluation and analysis. The purpose of the study is to present a systematic literature review (SLR) on how to solve this problem and organize the published research papers that answer our four research questions.展开更多
A series of sulfated CeO2 catalysts were synthesized by impregnation and sol-gel methods and used for selective catalytic reduction （SCR） of NOx by NH3. The results showed that the sulfated CeO2 catalysts prepared b...A series of sulfated CeO2 catalysts were synthesized by impregnation and sol-gel methods and used for selective catalytic reduction （SCR） of NOx by NH3. The results showed that the sulfated CeO2 catalysts prepared by sol-gel method showed excellent catalytic activity at 150-50 ℃, and more than 90% NOx conversion was obtained at 232-450 ℃ with a gas hourly space velocity of 60000 h-1. The catalysts were characterized by X-ray diffraction （XRD）, N2 adsorption, Raman, thermogravimetry （TG）, H2-tem- perature-programmed reduction （H2-TPR） and Py-infrared spectroscopy （Py-IR）. The excellent SCR performance was associated with the surface acidity and the micro-structure. The introduction of sulfate acid into CeO2 could increase the amount of BrOnsted and Lewis acid sites over the catalysts, resulting in the improvement of the low temperature activity. The sulfated CeO2 catalysts prepared by sol-gel method possessed lower crystallization degree, excellent redox property and larger specific surface areas, which were responsible for the superior SCR performance.展开更多
In the present study,we synthesized CeO2 catalysts doped with various transition metals(M=Co,Fe,or Cu)using a supercritical water hydrothermal route,which led to the incorporation of the metal ions in the CeO2 lattice...In the present study,we synthesized CeO2 catalysts doped with various transition metals(M=Co,Fe,or Cu)using a supercritical water hydrothermal route,which led to the incorporation of the metal ions in the CeO2 lattice,forming solid solutions.The catalysts were then used for the selective catalytic reduction(SCR)of NO by CO.The Cu‐doped catalyst exhibited the highest SCR activity;it had a T50(i.e.,50%NO conversion)of only 83°C and a T90(i.e.,90%NO conversion)of 126°C.Such an activity was also higher than in many state‐of‐the‐art catalysts.In situ diffuse reflectance Fourier transform infrared spectroscopy suggested that the MOx‐CeO2 catalysts(M=Co and Fe)mainly followed an Eley‐Rideal reaction mechanism for CO‐SCR.In contrast,a Langmuir‐Hinshelwood SCR reaction mechanism occurred in CuO‐CeO2 owing to the presence of Cu+species,which ensured effective adsorption of CO.This explains why CuO‐CeO2 exhibited the highest activity with regard to the SCR of NO by CO.展开更多
A series of CeO2-ZrO2-WO3 catalysts for the selective catalytic reduction （SCR） of NO with NH3 were prepared by hydrothermal method. The influence of calcination temperature on the catalytic activity, microstructure...A series of CeO2-ZrO2-WO3 catalysts for the selective catalytic reduction （SCR） of NO with NH3 were prepared by hydrothermal method. The influence of calcination temperature on the catalytic activity, microstructure, surface acidity and redox behavior of CeO2-ZrO2-WO3 catalyst was investigated using various characterization methods. It was found that the CeO2-ZrO2-WO3 catalyst calcined at 600 ℃ showed the best catalytic performance and excellent N2 selectivity, and yielded more than 90% NO conversion in a wide temperature range of 250-500 ℃ with a space velocity （GHSV） of 60000 131. As the calcination temperature was increased from 400 to 600 ℃, the NO conversion obviously increased, but decreased at higher calcination temperature. The results implied that the higher surface area, the strongest synergistic interaction, the superior redox property and the highly dispersed or amorphous WO3 species contributed to the excellent SCR activity of the CeO2-ZrO2-WO3 catalyst calcined at 600℃.展开更多
A series of praseodymium added CeO2（ZrO2）/TiO2 catalysts separately prepared by methods of sol-gel and impregnation were tested for selective catalytic reduction of NO, and characterized by X-ray diffraction （XRD）...A series of praseodymium added CeO2（ZrO2）/TiO2 catalysts separately prepared by methods of sol-gel and impregnation were tested for selective catalytic reduction of NO, and characterized by X-ray diffraction （XRD）, N2-brumauer-emmett-teller （N2-BET）, NH3-temperature programmed desorption （NH3-TPD）, H2-temperature programmed reduction （H2-TPR）, PL spectra, Ra-man spectra, electron paramagnetic resonance （EPR） and X-ray photoelectron spectroscopy （XPS）, respectively. Influence of prepara-tion method on catalytic performance was studied. Results showed that the influence of Pr addition on catalytic performance of the CeO2（ZrO2）/TiO2 catalysts was different between the sol-gel method and the impregnation method. The Pr addition tended to interact with TiO2 and formed the structure of Ti-O-Pr in the sol-gel method while it was more likely to interact with CeO2 forming the struc-ture of Ce-O-Pr in the impregnation method. The total acid amount and redox properties of the catalysts prepared by sol-gel method decreased with the addition of Pr element, which resulted in decrease of catalytic activity. In contrast, the Pr-added catalyst prepared by impregnation method was found to possess easier reducibility, more total acid amount and higher proportion of Ce3＋ species, which was favourable for higher catalytic activity.展开更多
A method of minimizing rankings inconsistency is proposed for a decision-making problem with rankings of alternatives given by multiple decision makers according to multiple criteria. For each criteria, at first, the ...A method of minimizing rankings inconsistency is proposed for a decision-making problem with rankings of alternatives given by multiple decision makers according to multiple criteria. For each criteria, at first, the total inconsistency between the rankings of all alternatives for the group and the ones for every decision maker is defined after the decision maker weights in respect to the criteria are considered. Similarly, the total inconsistency between their final rankings for the group and the ones under every criteria is determined after the criteria weights are taken into account. Then two nonlinear integer programming models minimizing respectively the two total inconsistencies above are developed and then transformed to two dynamic programming models to obtain separately the rankings of all alternatives for the group with respect to each criteria and their final rankings. A supplier selection case illustrated the proposed method, and some discussions on the results verified its effectiveness. This work develops a new measurement of ordinal preferences’ inconsistency in multi-criteria group decision-making （MCGDM） and extends the cook-seiford social selection function to MCGDM considering weights of criteria and decision makers and can obtain unique ranking result.展开更多
A series CeO2（ZrO2）/TiO2 catalysts were modified with Er using a sol-gel method.The catalytic activity of the obtained catalysts in the selective catalytic reduction（SCR） of NO with NH3 was investigated to determi...A series CeO2（ZrO2）/TiO2 catalysts were modified with Er using a sol-gel method.The catalytic activity of the obtained catalysts in the selective catalytic reduction（SCR） of NO with NH3 was investigated to determine the appropriate Er dosage.The catalysts were characterized using X-ray diffraction,N2 adsorption,NH3 temperature-programmed desorption,H2 temperature-programmed reduction,photoluminescence spectroscopy,electron paramagnetic resonance spectroscopy,and X-ray photoelectron spectroscopy.The results showed that the optimum Er/Ce molar ratio was 0.10;this catalyst had excellent resistance to catalyst poisoning caused by vapor and sulfur and gave more than 90% NO conversion at 220–395 ℃ and a gas hourly space velocity of 71 400 h^-1.Er incorporation increased the Ti^3＋ concentrations,oxygen storage capacities,and oxygen vacancy concentrations of the catalysts,resulting in excellent catalytic performance.Er incorporation also decreased the acid strength and inhibited growth of TiO2 and CeO2 crystal particles,which increased the catalytic activity.The results show that high oxygen vacancy concentrations and oxygen storage capacities,large amounts of Ti^3＋,and low acid strengths give excellent SCR activity.展开更多
This study developed specific criteria and a fuzzy analytic network process(FANP)to assess and select portfolios on the Tehran Stock Exchange(TSE).Although the portfolio selection problem has been widely investigated,...This study developed specific criteria and a fuzzy analytic network process(FANP)to assess and select portfolios on the Tehran Stock Exchange(TSE).Although the portfolio selection problem has been widely investigated,most studies have focused on income and risk as the main decision-making criteria.However,there are many other important criteria that have been neglected.To fill this gap,first,a literature review was conducted to determine the main criteria for portfolio selection,and a Likert-type questionnaire was then used to finalize a list of criteria.Second,the finalized criteria were applied in an FANP to rank 10 different TSE portfolios.The results indicated that profitability,growth,market,and risk are the most important criteria for portfolio selection.Additionally,portfolios 6,7,2,4,8,1,5,3,9,and 10(A6,A7,A2,A4,A8,A1,A5,A3,A9,and A10)were found to be the best choices.Implications and directions for future research are discussed.展开更多
Stroke is a chronic cerebrovascular disease that carries a high risk.Stroke risk assessment is of great significance in preventing,reversing and reducing the spread and the health hazards caused by stroke.Aiming to ob...Stroke is a chronic cerebrovascular disease that carries a high risk.Stroke risk assessment is of great significance in preventing,reversing and reducing the spread and the health hazards caused by stroke.Aiming to objectively predict and identify strokes,this paper proposes a new stroke risk assessment decision-making model named Logistic-AdaBoost(Logistic-AB)based on machine learning.First,the categorical boosting(CatBoost)method is used to perform feature selection for all features of stroke,and 8 main features are selected to form a new index evaluation system to predict the risk of stroke.Second,the borderline synthetic minority oversampling technique(SMOTE)algorithm is applied to transform the unbalanced stroke dataset into a balanced dataset.Finally,the stroke risk assessment decision-makingmodel Logistic-AB is constructed,and the overall prediction performance of this new model is evaluated by comparing it with ten other similar models.The comparison results show that the new model proposed in this paper performs better than the two single algorithms(logistic regression and AdaBoost)on the four indicators of recall,precision,F1 score,and accuracy,and the overall performance of the proposed model is better than that of common machine learning algorithms.The Logistic-AB model presented in this paper can more accurately predict patients’stroke risk.展开更多
The influence of tungsten trioxide(WO3)loading on the selective catalytic reduction(SCR)of nitric oxide(NO)by ammonia(NH3)over WO3/cerium dioxide(CeO2)was investigated.The NO conversion first rose and then declined wi...The influence of tungsten trioxide(WO3)loading on the selective catalytic reduction(SCR)of nitric oxide(NO)by ammonia(NH3)over WO3/cerium dioxide(CeO2)was investigated.The NO conversion first rose and then declined with increasing WO3loading.It was found that the crystalline WO3in the1.6WO3/CeO2sample could be removed in25wt%ammonium hydroxide at70°C,which improved the catalytic activity of the sample.The obtained samples were characterized by X‐ray diffraction,Raman spectroscopy,X‐ray photoelectron spectroscopy,hydrogen(H2)temperature programmed reduction,NH3temperature programmed desorption,and in situ diffuse reflectance infrared Fourier transform spectroscopy.The results revealed that the dispersed WO3promoted the catalytic activity of WO3/CeO2while the crystalline WO3inhibited catalytic activity.The oxygen activation of CeO2was inhibited by the coverage of WO3,which weakened NO oxidation and adsorption of nitrate species over WO3/CeO2.In addition,the NH3adsorption performance on CeO2was improved by modification with WO3.NH3was the most stable adsorbed species under NH3SCR reaction conditions.In situ DRIFT spectra suggested that the NH3SCR reaction proceeded via the Eley‐Rideal mechanism over WO3/CeO2.Thus,when the loading of WO3was close to the dispersion capacity,the effects of NH3adsorption and activation were maximized to promote the reaction via the Eley‐Rideal route.展开更多
A series of VOx/CeO2 catalysts we re synthesized via vanadia supported on ceria with different BET surface areas.The catalysts were employed to investigate the active sites for the selective catalytic reduction of NO ...A series of VOx/CeO2 catalysts we re synthesized via vanadia supported on ceria with different BET surface areas.The catalysts were employed to investigate the active sites for the selective catalytic reduction of NO with NH3(NH3-SCR).The kinetic results show that VOx/CeO2 catalysts exhibit nearly constant apparent activation energies(Ea),indicating the same SCR reaction mechanism.The V-O-Ce bridging modes and oligomeric VOx were identified and quantified by Raman,FT-IR and H2-TPR.The amounts of the V-O-Ce bridging modes calculated by H2-TPR are correlated to the NH3-SCR intrinsic reaction rates.The turnover frequencies(TOFs) show a constant value at the same temperature,which were calculated based on the number of V-O-Ce bridging modes of VOx/CeO2 catalysts.Therefore,it can be concluded that the V-O-Ce bridging modes are the active sites of VOx/CeO2 catalysts for the NH3-SCR reaction.展开更多
This work studied CuO/CeO2-Co3O4 with wt% Ce:Co ratio 95:5 for selective CO oxidation with effect of? wt% Cu loading. The catalysts were prepared by co-precipitation. Characterizations of catalysts were carried out by...This work studied CuO/CeO2-Co3O4 with wt% Ce:Co ratio 95:5 for selective CO oxidation with effect of? wt% Cu loading. The catalysts were prepared by co-precipitation. Characterizations of catalysts were carried out by XRD and BET techniques. The results showed a good dispersion of CuO for 5 wt% Cu loading catalysts and showed high specific surface area of catalyst. For selective CO oxidation, both 5CuO and 30CuO catalysts could remove completely CO in the presence of excess hydrogen at 423 K and 20CuO could eliminate CO completely at 443 K. Moreover, considering the selectivity to CO oxidation, the 5CuO catalyst has shown the highest selectivity of 85% while the 30CuO catalyst obtains the selectivity of 65% at the reaction temperature of 423 K.展开更多
Purpose–Material selection,driven by wide and often conflicting objectives,is an important,sometimes difficult problem in material engineering.In this context,multi-criteria decision-making(MCDM)methodologies are eff...Purpose–Material selection,driven by wide and often conflicting objectives,is an important,sometimes difficult problem in material engineering.In this context,multi-criteria decision-making(MCDM)methodologies are effective.An approach of MCDM is needed to cater to criteria of material assortment simultaneously.More firms are now concerned about increasing their productivity using mathematical tools.To occupy a gap in the previous literature this research recommends an integrated MCDM and mathematical Bi-objective model for the selection of material.In addition,by using the Technique for Order Preference by Similarity to Ideal Solution(TOPSIS),the inherent ambiguities of decision-makers in paired evaluations are considered in this research.It goes on to construct a mathematical bi-objective model for determining the best item to purchase.Design/methodology/approach–The entropy perspective is implemented in this paper to evaluate the weight parameters,while the TOPSIS technique is used to determine the best and worst intermediate pipe materials for automotive exhaust system.The intermediate pipes are used to join the components of the exhaust systems.The materials usually used to manufacture intermediate pipe are SUS 436LM,SUS 430,SUS 304,SUS 436L,SUH 409 L,SUS 441 L and SUS 439L.These seven materials are evaluated based on tensile strength(TS),hardness(H),elongation(E),yield strength(YS)and cost(C).A hybrid methodology combining entropy-based criteria weighting,with the TOPSIS for alternative ranking,is pursued to identify the optimal design material for an engineered application in this paper.This study aims to help while filling the information gap in selecting the most suitable material for use in the exhaust intermediate pipes.After that,the authors searched for and considered eight materials and evaluated them on the following five criteria:(1)TS,(2)YS,(3)H,(4)E and(5)C.The first two criteria have been chosen because they can have a lot of influence on the behavior of the exhaust intermediate pipes,on their performance and on the cost.In this structure,the weights of the criteria are calculated objectively through the entropy method in order to have an unbiased assessment.This essentially measures the quantity of information each criterion contribution,indicating the relative importance of these criteria better.Subsequently,the materials were ranked using the TOPSIS method in terms of their relative performance by measuring each material from an ideal solution to determine the best alternative.The results show that SUS 309,SUS 432L and SUS 436 LM are the first three materials that the exhaust intermediate pipe optimal design should consider.Findings–The material matrix of the decision presented in Table 3 was normalized through Equation 5,as shown in Table 5,and the matrix was multiplied with weighting criteriaß_j.The obtained weighted normalized matrix V_ij is presented in Table 6.However,the ideal,worst and best value was ascertained by employing Equation 7.This study is based on the selection of material for the development of intermediate pipe using MCDM,and it involves four basic stages,i.e.method of translation criteria,screening process,method of ranking and search for methods.The selection was done through the TOPSIS method,and the criteria weight was obtained by the entropy method.The result showed that the top three materials are SUS 309,SUS 432L and SUS 436 LM,respectively.For the future work,it is suggested to select more alternatives and criteria.The comparison can also be done by using different MCDM techniques like and Choice Expressing Reality(ELECTRE),Decision-Making Trial and Evaluation Laboratory(DEMATEL)and Preference Ranking Organization Method for Enrichment Evaluation(PROMETHEE).Originality/value–The results provide important conclusions for material selection in this targeted application,verifying the employment of mutual entropy-TOPSIS methodology for a series of difficult engineering decisions in material engineering concepts that combine superior capacity with better performance as well as cost-efficiency in various engineering design.展开更多
Optimal route selection is an important function of vehicle trac flow guidance system. Its core is to determine the index weight for measuring the route merits and to determine the evaluation method for selecting rout...Optimal route selection is an important function of vehicle trac flow guidance system. Its core is to determine the index weight for measuring the route merits and to determine the evaluation method for selecting route. In this paper, subjective weighting method which relies on driver preference is used to determine the weight and the paper proposes the multi-criteria weighted decision method based on vague sets for selecting the optimal route. Examples show that, the usage of vague sets to describe route index value can provide more decision-making information for route selection.展开更多
基金Projects 40372069 supported by the National Natural Science Foundation of China, NCET-05-0479 by the Support Program of Excellent Ability in the NewEra of Ministry of Education and 0F4506 by the Science and Technology Foundation of China University of Mining & Technology
文摘An application of an unequal-weighted multi-objective decision making method in site selection of a waste sanitary landfill is discussed. The eight factors, which affected possible options, were: size and capacity of the landfill, permeability of the stratum, the average difference in elevation between the groundwater level and the bottom of the landfill pit, quality and source of clay, the quality grade of the landfill site, the effect of landfill engineering on nearby residents, distance to the water supply and the water source as well as the cost of construction and waste transport. These are determined, given the conditions of the geological environment, the need for environmental protection and landfill site construction and transportation related to the design and operation of a sanitary landfill. The weights of the eight factors were further investigated based on the difference in their relevance. Combined with practical experience from Xuzhou city (Jiangsu province, China), the objectives, effects and weights of grey decision-making were deter- mined and the process and outcome of the landfill site selection are stated in detail. The decision-making results have been proven to be acceptable and correct. As we show, unequal-weighted multi-objective grey situation decision-mak- ing is characterized by easy calculations and good maneuverability when used in landfill site selection. The number of factors (objectives) affecting the outcome and the quantitative method of qualitative indices can be adjusted on the basis of concrete conditions in landfill site selection. Therefore, unequal-weighted multi-objective grey situation decision making is a feasible method in selecting landfill sites which offers a reference method for landfill site selection else- where. It is a useful, rational and scientific exploration in the choice of`a landfill site.
文摘This paper explores the decision-making mechanism of the consuming behavior hidden behind the sudden popularity of the Oriental Selection Company in terms of the mental accounting theory.Firstly,according to the“Non-alternative”characteristics of mental accounting,this paper expounds how the strategy of the bilingual live-streaming of Oriental Selection promoters stimulates consumers’desire to buy the advertised products and services whilst using the utility theory of mental accounting to analyze how Oriental Selection promoters improve consumers’acquisition utility and total utility.Secondly,we sum up the successful experiences of Oriental Selection:The live-streaming industry should apply the theory of mental accounting in effectively overcoming the shortcomings of the live-streamed marketing by stimulating consumers’desire and influencing their decision-making behavior through the streaming of content that triggers them to make purchases.This is achievable by abandoning the traditional ways of loudly urging consumers to buy goods.Finally,this paper puts forward some suggestions on how to use the mental accounting theory in promoting sustainable consumption and points out the prospects for Oriental Selection.
文摘According to the Total Cost of Ownership concept (TOCO), the selection criterion of international procurement suppliers can be classified into two levels, namely Macroeconomic decision-making level and Microeconomic decision-making level. In this paper, a new quantitative method is put forward to accomplish the task of total assessment on the Microeconomic level which analyses all of the quantitative and qualitative factors with regard to the supplier selection. A Microsoft Excel based new application kit named TOCO Total Assessment Tool is introduced. It can calculate the direct cost and the indirect cost conveniently and can help to evaluate the performance of candidate suppliers. To use the tool, the first module called Total Cost Analysis Module is introduced to calculate the total cost of supplier selection, and then the second module named Supplier Evaluation Module is used to evaluate the performance of each supplier. Finally, the results from these two modules are transferred to the Final Comparison Module to get the final decision-making results. In this paper, the supplier selection related factors are discussed; the method of using the tool is illustrated in detail. It is shown that scientific usage of the TOCO Total Assessment Tool can make the decision-making processes of supplier selection in international procurement transparent, easily calculated, and objective. At the end, a practical case is given to clarify the procedure of using the tool.
文摘Evaluating and selecting players to suit football clubs and decision-makers (coaches, managers, technical, and medical staff) is a difficult process from a managerial-financial and sporting perspective. Football is a highly competitive sport where sponsors and fans are attracted by success. The most successful players, based on their characteristics (criteria and sub-criteria), can influence the outcome of a football game at any given time. Consequently, the D-day of selection should employ a more appropriate approach to human resource management. To effectively address this issue, a detailed study and analysis of the available literature are needed to assist practitioners and professionals in making decisions about football player selection and hiring. Peer-reviewed journals were selected for collecting published papers between 2018 and 2023. A total of 66 relevant articles (journal articles, conference articles, book sections, and review articles) were selected for evaluation and analysis. The purpose of the study is to present a systematic literature review (SLR) on how to solve this problem and organize the published research papers that answer our four research questions.
基金Project supported by the National Natural Science Foundation of China(U1137603,21307047)the Opening Project of Key Laboratory of Green Catalysis of Sichuan Institutes of High Education(LYJ1309)Academic Newcomer Award of Yunnan Province
文摘A series of sulfated CeO2 catalysts were synthesized by impregnation and sol-gel methods and used for selective catalytic reduction （SCR） of NOx by NH3. The results showed that the sulfated CeO2 catalysts prepared by sol-gel method showed excellent catalytic activity at 150-50 ℃, and more than 90% NOx conversion was obtained at 232-450 ℃ with a gas hourly space velocity of 60000 h-1. The catalysts were characterized by X-ray diffraction （XRD）, N2 adsorption, Raman, thermogravimetry （TG）, H2-tem- perature-programmed reduction （H2-TPR） and Py-infrared spectroscopy （Py-IR）. The excellent SCR performance was associated with the surface acidity and the micro-structure. The introduction of sulfate acid into CeO2 could increase the amount of BrOnsted and Lewis acid sites over the catalysts, resulting in the improvement of the low temperature activity. The sulfated CeO2 catalysts prepared by sol-gel method possessed lower crystallization degree, excellent redox property and larger specific surface areas, which were responsible for the superior SCR performance.
文摘In the present study,we synthesized CeO2 catalysts doped with various transition metals(M=Co,Fe,or Cu)using a supercritical water hydrothermal route,which led to the incorporation of the metal ions in the CeO2 lattice,forming solid solutions.The catalysts were then used for the selective catalytic reduction(SCR)of NO by CO.The Cu‐doped catalyst exhibited the highest SCR activity;it had a T50(i.e.,50%NO conversion)of only 83°C and a T90(i.e.,90%NO conversion)of 126°C.Such an activity was also higher than in many state‐of‐the‐art catalysts.In situ diffuse reflectance Fourier transform infrared spectroscopy suggested that the MOx‐CeO2 catalysts(M=Co and Fe)mainly followed an Eley‐Rideal reaction mechanism for CO‐SCR.In contrast,a Langmuir‐Hinshelwood SCR reaction mechanism occurred in CuO‐CeO2 owing to the presence of Cu+species,which ensured effective adsorption of CO.This explains why CuO‐CeO2 exhibited the highest activity with regard to the SCR of NO by CO.
基金Project supported by the National Natural Science Foundation of China(21377048,21307047)the Opening Project of Key Laboratory of Green Catalysis of Sichuan Institutes of High Education(LYJ1309)
文摘A series of CeO2-ZrO2-WO3 catalysts for the selective catalytic reduction （SCR） of NO with NH3 were prepared by hydrothermal method. The influence of calcination temperature on the catalytic activity, microstructure, surface acidity and redox behavior of CeO2-ZrO2-WO3 catalyst was investigated using various characterization methods. It was found that the CeO2-ZrO2-WO3 catalyst calcined at 600 ℃ showed the best catalytic performance and excellent N2 selectivity, and yielded more than 90% NO conversion in a wide temperature range of 250-500 ℃ with a space velocity （GHSV） of 60000 131. As the calcination temperature was increased from 400 to 600 ℃, the NO conversion obviously increased, but decreased at higher calcination temperature. The results implied that the higher surface area, the strongest synergistic interaction, the superior redox property and the highly dispersed or amorphous WO3 species contributed to the excellent SCR activity of the CeO2-ZrO2-WO3 catalyst calcined at 600℃.
基金supported by National Key Research and Development Program of China(2016YFC0205500)National Natural Science Foundation of China(51272105)+1 种基金Jiangsu Provincial Science and Technology Supporting Program(BE2013718)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘A series of praseodymium added CeO2（ZrO2）/TiO2 catalysts separately prepared by methods of sol-gel and impregnation were tested for selective catalytic reduction of NO, and characterized by X-ray diffraction （XRD）, N2-brumauer-emmett-teller （N2-BET）, NH3-temperature programmed desorption （NH3-TPD）, H2-temperature programmed reduction （H2-TPR）, PL spectra, Ra-man spectra, electron paramagnetic resonance （EPR） and X-ray photoelectron spectroscopy （XPS）, respectively. Influence of prepara-tion method on catalytic performance was studied. Results showed that the influence of Pr addition on catalytic performance of the CeO2（ZrO2）/TiO2 catalysts was different between the sol-gel method and the impregnation method. The Pr addition tended to interact with TiO2 and formed the structure of Ti-O-Pr in the sol-gel method while it was more likely to interact with CeO2 forming the struc-ture of Ce-O-Pr in the impregnation method. The total acid amount and redox properties of the catalysts prepared by sol-gel method decreased with the addition of Pr element, which resulted in decrease of catalytic activity. In contrast, the Pr-added catalyst prepared by impregnation method was found to possess easier reducibility, more total acid amount and higher proportion of Ce3＋ species, which was favourable for higher catalytic activity.
基金supported by the National Natural Science Foundation of China (60904059 60975049)+1 种基金the Philosophy and Social Science Foundation of Hunan Province (2010YBA104)the National High Technology Research and Development Program of China (863 Program)(2009AA04Z107)
文摘A method of minimizing rankings inconsistency is proposed for a decision-making problem with rankings of alternatives given by multiple decision makers according to multiple criteria. For each criteria, at first, the total inconsistency between the rankings of all alternatives for the group and the ones for every decision maker is defined after the decision maker weights in respect to the criteria are considered. Similarly, the total inconsistency between their final rankings for the group and the ones under every criteria is determined after the criteria weights are taken into account. Then two nonlinear integer programming models minimizing respectively the two total inconsistencies above are developed and then transformed to two dynamic programming models to obtain separately the rankings of all alternatives for the group with respect to each criteria and their final rankings. A supplier selection case illustrated the proposed method, and some discussions on the results verified its effectiveness. This work develops a new measurement of ordinal preferences’ inconsistency in multi-criteria group decision-making （MCGDM） and extends the cook-seiford social selection function to MCGDM considering weights of criteria and decision makers and can obtain unique ranking result.
基金supported by the National Natural Science Foundation of China(51272105)Jiangsu Provincial Science and Technology Supporting Program(BE2013718)+1 种基金Research Subject of Environmental Protection Department of Jiangsu Province of China(2013006)Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)~~
文摘A series CeO2（ZrO2）/TiO2 catalysts were modified with Er using a sol-gel method.The catalytic activity of the obtained catalysts in the selective catalytic reduction（SCR） of NO with NH3 was investigated to determine the appropriate Er dosage.The catalysts were characterized using X-ray diffraction,N2 adsorption,NH3 temperature-programmed desorption,H2 temperature-programmed reduction,photoluminescence spectroscopy,electron paramagnetic resonance spectroscopy,and X-ray photoelectron spectroscopy.The results showed that the optimum Er/Ce molar ratio was 0.10;this catalyst had excellent resistance to catalyst poisoning caused by vapor and sulfur and gave more than 90% NO conversion at 220–395 ℃ and a gas hourly space velocity of 71 400 h^-1.Er incorporation increased the Ti^3＋ concentrations,oxygen storage capacities,and oxygen vacancy concentrations of the catalysts,resulting in excellent catalytic performance.Er incorporation also decreased the acid strength and inhibited growth of TiO2 and CeO2 crystal particles,which increased the catalytic activity.The results show that high oxygen vacancy concentrations and oxygen storage capacities,large amounts of Ti^3＋,and low acid strengths give excellent SCR activity.
文摘This study developed specific criteria and a fuzzy analytic network process(FANP)to assess and select portfolios on the Tehran Stock Exchange(TSE).Although the portfolio selection problem has been widely investigated,most studies have focused on income and risk as the main decision-making criteria.However,there are many other important criteria that have been neglected.To fill this gap,first,a literature review was conducted to determine the main criteria for portfolio selection,and a Likert-type questionnaire was then used to finalize a list of criteria.Second,the finalized criteria were applied in an FANP to rank 10 different TSE portfolios.The results indicated that profitability,growth,market,and risk are the most important criteria for portfolio selection.Additionally,portfolios 6,7,2,4,8,1,5,3,9,and 10(A6,A7,A2,A4,A8,A1,A5,A3,A9,and A10)were found to be the best choices.Implications and directions for future research are discussed.
基金supported by the National Natural Science Foundation of China (No.72071150).
文摘Stroke is a chronic cerebrovascular disease that carries a high risk.Stroke risk assessment is of great significance in preventing,reversing and reducing the spread and the health hazards caused by stroke.Aiming to objectively predict and identify strokes,this paper proposes a new stroke risk assessment decision-making model named Logistic-AdaBoost(Logistic-AB)based on machine learning.First,the categorical boosting(CatBoost)method is used to perform feature selection for all features of stroke,and 8 main features are selected to form a new index evaluation system to predict the risk of stroke.Second,the borderline synthetic minority oversampling technique(SMOTE)algorithm is applied to transform the unbalanced stroke dataset into a balanced dataset.Finally,the stroke risk assessment decision-makingmodel Logistic-AB is constructed,and the overall prediction performance of this new model is evaluated by comparing it with ten other similar models.The comparison results show that the new model proposed in this paper performs better than the two single algorithms(logistic regression and AdaBoost)on the four indicators of recall,precision,F1 score,and accuracy,and the overall performance of the proposed model is better than that of common machine learning algorithms.The Logistic-AB model presented in this paper can more accurately predict patients’stroke risk.
基金supported by the National Natural Foundation of China(21607019,21503115)the Open Project Program of Jiangsu Key Laboratory of Vehicle Emissions Control(OVEC013)the Talent Introduction Project of Chongqing Three Gorges University~~
文摘The influence of tungsten trioxide(WO3)loading on the selective catalytic reduction(SCR)of nitric oxide(NO)by ammonia(NH3)over WO3/cerium dioxide(CeO2)was investigated.The NO conversion first rose and then declined with increasing WO3loading.It was found that the crystalline WO3in the1.6WO3/CeO2sample could be removed in25wt%ammonium hydroxide at70°C,which improved the catalytic activity of the sample.The obtained samples were characterized by X‐ray diffraction,Raman spectroscopy,X‐ray photoelectron spectroscopy,hydrogen(H2)temperature programmed reduction,NH3temperature programmed desorption,and in situ diffuse reflectance infrared Fourier transform spectroscopy.The results revealed that the dispersed WO3promoted the catalytic activity of WO3/CeO2while the crystalline WO3inhibited catalytic activity.The oxygen activation of CeO2was inhibited by the coverage of WO3,which weakened NO oxidation and adsorption of nitrate species over WO3/CeO2.In addition,the NH3adsorption performance on CeO2was improved by modification with WO3.NH3was the most stable adsorbed species under NH3SCR reaction conditions.In situ DRIFT spectra suggested that the NH3SCR reaction proceeded via the Eley‐Rideal mechanism over WO3/CeO2.Thus,when the loading of WO3was close to the dispersion capacity,the effects of NH3adsorption and activation were maximized to promote the reaction via the Eley‐Rideal route.
基金Project supported by the National Key Research and Development Program (2017YFC0211302)China Huadian Science and Technology Institute (CHDI.KJ-20)。
文摘A series of VOx/CeO2 catalysts we re synthesized via vanadia supported on ceria with different BET surface areas.The catalysts were employed to investigate the active sites for the selective catalytic reduction of NO with NH3(NH3-SCR).The kinetic results show that VOx/CeO2 catalysts exhibit nearly constant apparent activation energies(Ea),indicating the same SCR reaction mechanism.The V-O-Ce bridging modes and oligomeric VOx were identified and quantified by Raman,FT-IR and H2-TPR.The amounts of the V-O-Ce bridging modes calculated by H2-TPR are correlated to the NH3-SCR intrinsic reaction rates.The turnover frequencies(TOFs) show a constant value at the same temperature,which were calculated based on the number of V-O-Ce bridging modes of VOx/CeO2 catalysts.Therefore,it can be concluded that the V-O-Ce bridging modes are the active sites of VOx/CeO2 catalysts for the NH3-SCR reaction.
文摘This work studied CuO/CeO2-Co3O4 with wt% Ce:Co ratio 95:5 for selective CO oxidation with effect of? wt% Cu loading. The catalysts were prepared by co-precipitation. Characterizations of catalysts were carried out by XRD and BET techniques. The results showed a good dispersion of CuO for 5 wt% Cu loading catalysts and showed high specific surface area of catalyst. For selective CO oxidation, both 5CuO and 30CuO catalysts could remove completely CO in the presence of excess hydrogen at 423 K and 20CuO could eliminate CO completely at 443 K. Moreover, considering the selectivity to CO oxidation, the 5CuO catalyst has shown the highest selectivity of 85% while the 30CuO catalyst obtains the selectivity of 65% at the reaction temperature of 423 K.
文摘Purpose–Material selection,driven by wide and often conflicting objectives,is an important,sometimes difficult problem in material engineering.In this context,multi-criteria decision-making(MCDM)methodologies are effective.An approach of MCDM is needed to cater to criteria of material assortment simultaneously.More firms are now concerned about increasing their productivity using mathematical tools.To occupy a gap in the previous literature this research recommends an integrated MCDM and mathematical Bi-objective model for the selection of material.In addition,by using the Technique for Order Preference by Similarity to Ideal Solution(TOPSIS),the inherent ambiguities of decision-makers in paired evaluations are considered in this research.It goes on to construct a mathematical bi-objective model for determining the best item to purchase.Design/methodology/approach–The entropy perspective is implemented in this paper to evaluate the weight parameters,while the TOPSIS technique is used to determine the best and worst intermediate pipe materials for automotive exhaust system.The intermediate pipes are used to join the components of the exhaust systems.The materials usually used to manufacture intermediate pipe are SUS 436LM,SUS 430,SUS 304,SUS 436L,SUH 409 L,SUS 441 L and SUS 439L.These seven materials are evaluated based on tensile strength(TS),hardness(H),elongation(E),yield strength(YS)and cost(C).A hybrid methodology combining entropy-based criteria weighting,with the TOPSIS for alternative ranking,is pursued to identify the optimal design material for an engineered application in this paper.This study aims to help while filling the information gap in selecting the most suitable material for use in the exhaust intermediate pipes.After that,the authors searched for and considered eight materials and evaluated them on the following five criteria:(1)TS,(2)YS,(3)H,(4)E and(5)C.The first two criteria have been chosen because they can have a lot of influence on the behavior of the exhaust intermediate pipes,on their performance and on the cost.In this structure,the weights of the criteria are calculated objectively through the entropy method in order to have an unbiased assessment.This essentially measures the quantity of information each criterion contribution,indicating the relative importance of these criteria better.Subsequently,the materials were ranked using the TOPSIS method in terms of their relative performance by measuring each material from an ideal solution to determine the best alternative.The results show that SUS 309,SUS 432L and SUS 436 LM are the first three materials that the exhaust intermediate pipe optimal design should consider.Findings–The material matrix of the decision presented in Table 3 was normalized through Equation 5,as shown in Table 5,and the matrix was multiplied with weighting criteriaß_j.The obtained weighted normalized matrix V_ij is presented in Table 6.However,the ideal,worst and best value was ascertained by employing Equation 7.This study is based on the selection of material for the development of intermediate pipe using MCDM,and it involves four basic stages,i.e.method of translation criteria,screening process,method of ranking and search for methods.The selection was done through the TOPSIS method,and the criteria weight was obtained by the entropy method.The result showed that the top three materials are SUS 309,SUS 432L and SUS 436 LM,respectively.For the future work,it is suggested to select more alternatives and criteria.The comparison can also be done by using different MCDM techniques like and Choice Expressing Reality(ELECTRE),Decision-Making Trial and Evaluation Laboratory(DEMATEL)and Preference Ranking Organization Method for Enrichment Evaluation(PROMETHEE).Originality/value–The results provide important conclusions for material selection in this targeted application,verifying the employment of mutual entropy-TOPSIS methodology for a series of difficult engineering decisions in material engineering concepts that combine superior capacity with better performance as well as cost-efficiency in various engineering design.
基金Supported by the Provincial Government Decision-making Tender Subject(2013B318)Supported by the Educational Committee of Henan Province of China(15A520004)
文摘Optimal route selection is an important function of vehicle trac flow guidance system. Its core is to determine the index weight for measuring the route merits and to determine the evaluation method for selecting route. In this paper, subjective weighting method which relies on driver preference is used to determine the weight and the paper proposes the multi-criteria weighted decision method based on vague sets for selecting the optimal route. Examples show that, the usage of vague sets to describe route index value can provide more decision-making information for route selection.
