Ammonia selective catalytic reduction(NH_(3)-SCR)is the most widely used technology in thefield of industrialflue gas denitrification.However,the presence of heavy metals influe gas can seriously affect the performance of...Ammonia selective catalytic reduction(NH_(3)-SCR)is the most widely used technology in thefield of industrialflue gas denitrification.However,the presence of heavy metals influe gas can seriously affect the performance of SCR catalysts,leading to their deactivation or even failure.Therefore,it is of great significance to deeply study the poisoning mechanism of SCR catalysts under the action of heavy metals and how to enhance their resistance to poisoning.This article reviews the reaction mechanism of NH_(3)-SCR technology,compares the impact of heavy metals on the activity of different SCR catalysts,and then discusses in detail the poisoning mechanism of SCR catalysts by heavy metals,including pore blockage,reduction of specific surface area,and destruction of active centers caused by heavy metal deposition,all of which jointly lead to the physical or chemical poisoning of the catalyst.Meanwhile,the mechanism of action when multiple toxicants coexist was analyzed.To effectively address these challenges,the article further summarizes various methods to improve the catalyst's resistance to heavy metal poisoning,such as element doping,structural optimization,and carrier addition,which significantly enhance the heavy metal resistance of the catalyst.Finally,the article provides a prospective analysis of the challenges faced by NH_(3)-SCR catalysts in anti-heavy metal poisoning technology,emphasizing the necessity of in-depth research on the poisoning mechanism,exploration of the mechanism of synergistic action of multiple pollutants,development of comprehensive anti-poisoning strategies,and research on catalyst regeneration technology,in order to promote the development of efficient anti-heavy metal poisoning NH_(3)-SCR catalysts.展开更多
Contaminants(K,Na,Ca,and Mg)were introduced into Cu-SAPO-18 via incipient wetness impregnation to investigate their effect on the selective catalytic reduction of NOx with NH3(NH3-SCR)over Cu-SAPO-18.After the introdu...Contaminants(K,Na,Ca,and Mg)were introduced into Cu-SAPO-18 via incipient wetness impregnation to investigate their effect on the selective catalytic reduction of NOx with NH3(NH3-SCR)over Cu-SAPO-18.After the introduction of contaminants into Cu-SAPO-18,the quantity of acidic sites and Cu^2+ species in catalyst decreases owing to the replacement of H^+ and Cu^2+ by K^+,Na^+,Ca^2+,and Mg^2+.Furthermore,the loss of isolated Cu^2+ induces the generation of CuO and CuAl2O4-like phases,which causes further loss in the Brunauer-Emmett-Teller surface area of the catalyst.Consequently,the deNOx performance of the contaminated Cu-SAPO-18 catalysts drops.Such decline in NH3-SCR performance becomes more pronounced by increasing the contaminant contents from 0.5 to 1.0 mmol/gcatal.In addition,the deactivation influence of the contaminants on Cu-SAPO-18 is presented in the order of K>Na>Ca>Mg,which is consistent with the order of reduction of acidic sites.To a certain degree,the effect of the acidic sites on the deactivation of Cu-SAPO-18 might be more significant than that of isolated Cu2+ and the catalyst framework.Moreover,kinetic analysis of NH3-SCR was conducted,and the results indicate that there is no influence of contaminants on the NH3-SCR mechanism.展开更多
An environmentally friendly precursor, adenosine, has been used as a dual source of C and N to synthesize nitrogen-doped carbon catalyst with/without Fe. A hydrothermal carbonization method has been used and water is ...An environmentally friendly precursor, adenosine, has been used as a dual source of C and N to synthesize nitrogen-doped carbon catalyst with/without Fe. A hydrothermal carbonization method has been used and water is the carbonization media. The morphology of samples with/without Fe component has been compared by HRTEM, and the result shows that Fe can promote the graphitization of carbon. Further electro-chemical test shows that the oxygen reduction reaction（ORR） catalytic activity of Fe-containing sample（C–Fe N） is much higher than that of the Fe-free sample（C–N）. Additionally, the intermediates of C–Fe N formed during each synthetic procedure have been thoroughly characterized by multiple methods,and the function of each procedure has been discussed. The C–Fe N sample exhibits high electro-catalytic stability and superior electro-catalytic activity toward ORR in alkaline media, with its half-wave potential 20 mV lower than that of commercial Pt/C（40 wt%）. It is further incorporated into alkaline polymer electrolyte fuel cell（APEFC） as the cathode material and led to a power density of 100 m W/cm;.展开更多
In order to reduce oxides of nitrogen （NOx） emanated from a diesel engine, a comprehensive urea selective catalyst reduction （SCR） DeNOx catalyst was modeled in which numerical simulations were used as a complemen...In order to reduce oxides of nitrogen （NOx） emanated from a diesel engine, a comprehensive urea selective catalyst reduction （SCR） DeNOx catalyst was modeled in which numerical simulations were used as a complementary tool for the experimental investigations to make the design decisions, and hence shorten the de- velopment process. In this approach, relevant conversion reactions were studied in 1D model, and the parame- ters obtained in this way were transferred to 3D simulations. According to the results of the study, the conver- sion of NO and NO2 increased with the increase in monolith solid temperature. With the increase in the ratio of NO2/NOx the conversion of NO, NO2 and NOx increased resulting in maximum reduction of NOxat the ratio of 1; beyond this ratio, the conversion of NO2 and NOx decreased; however, NO continued to be converted till the ratio was 1.8. The conversion of NOx decreased with the increase in space velocity.展开更多
Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction...Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction(ORR)and chlorideinduced degradation over conventional catalysts.In this study,we proposed a universal synthetic strategy to construct heteroatom axially coordinated Fe–N_(4) single-atom seawater catalyst materials(Cl–Fe–N_(4) and S–Fe–N_(4)).X-ray absorption spectroscopy confirmed their five-coordinated square pyramidal structure.Systematic evaluation of catalytic activities revealed that compared with S–Fe–N_(4),Cl–Fe–N_(4) exhibits smaller electrochemical active surface area and specific surface area,yet demonstrates higher limiting current density(5.8 mA cm^(−2)).The assembled zinc-air batteries using Cl–Fe–N_(4) showed superior power density(187.7 mW cm^(−2) at 245.1 mA cm^(−2)),indicating that Cl axial coordination more effectively enhances the intrinsic ORR activity.Moreover,Cl–Fe–N_(4) demonstrates stronger Cl−poisoning resistance in seawater environments.Chronoamperometry tests and zinc-air battery cycling performance evaluations confirmed its enhanced stability.Density functional theory calculations revealed that the introduction of heteroatoms in the axial direction regulates the electron center of Fe single atom,leading to more active reaction intermediates and increased electron density of Fe single sites,thereby enhancing the reduction in adsorbed intermediates and hence the overall ORR catalytic activity.展开更多
To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content ...To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.展开更多
Sluggish sulfur redox kinetics remain a critical bottleneck in the advancement of high-performance lithiumsulfur batteries(LSBs).Single-atom catalysts(SACs)offer a promising solution to this limitation,particularly wh...Sluggish sulfur redox kinetics remain a critical bottleneck in the advancement of high-performance lithiumsulfur batteries(LSBs).Single-atom catalysts(SACs)offer a promising solution to this limitation,particularly when their coordination structures are carefully engineered.Here,we develop a chromium-based SAC featuring a unique undercoordinated CrN_(3) configuration to boost sulfur electrochemistry.Compared with conventional CrN_(4),the CrN_(3) motif lowers 3d orbital occupancy and meanwhile activates the in-plane hybridizations with S 3p orbitals upon interaction with polysulfides,contributing to moderate adsorption strength and reduced energy barriers for bidirectional sulfur conversions.Additionally,the integration of the two-dimensional(2D)porous framework ensures abundant electrochemically active surfaces and efficiently exposed active sites.As a result,CrN_(3)-based cells demonstrate fast and durable sulfur redox reactions,enabling an ultralow capacity decay of 0.0075%per cycle over 1000 cycles and a high-rate capability of 651.9 mAh·g^(-1)at 5 C.The CrN_(3) catalyst retains robust catalytic efficiency under demanding conditions,delivering a high areal capacity of 5.53 mAh·cm^(-2) at high sulfur loading and lean electrolyte.This work establishes a compelling paradigm of SAC coordination engineering for designing advanced sulfur electrocatalysts for next-generation LSBs.展开更多
High‐entropy amorphous catalysts(HEACs)integrate multielement synergy with structural disorder,making them promising candidates for water splitting.Their distinctive features—including flexible coordination environm...High‐entropy amorphous catalysts(HEACs)integrate multielement synergy with structural disorder,making them promising candidates for water splitting.Their distinctive features—including flexible coordination environments,tunable electronic structures,abundant unsaturated active sites,and dynamic structural reassembly—collectively enhance electrochemical activity and durability under operating conditions.This review summarizes recent advances in HEACs for hydrogen evolution,oxygen evolution,and overall water splitting,highlighting their disorder-driven advantages over crystalline counterparts.Catalytic performance benchmarks are presented,and mechanistic insights are discussed,focusing on how multimetallic synergy,amorphization effect,and in‐situ reconstruction cooperatively regulate reaction pathways.These insights provide guidance for the rational design of next‐generation amorphous high‐entropy electrocatalysts with improved efficiency and durability.展开更多
Using photoelectrocatalytic CO_(2) reduction reaction(CO_(2)RR)to produce valuable fuels is a fascinating way to alleviate environmental issues and energy crises.Bismuth-based(Bi-based)catalysts have attracted widespr...Using photoelectrocatalytic CO_(2) reduction reaction(CO_(2)RR)to produce valuable fuels is a fascinating way to alleviate environmental issues and energy crises.Bismuth-based(Bi-based)catalysts have attracted widespread attention for CO_(2)RR due to their high catalytic activity,selectivity,excellent stability,and low cost.However,they still need to be further improved to meet the needs of industrial applications.This review article comprehensively summarizes the recent advances in regulation strategies of Bi-based catalysts and can be divided into six categories:(1)defect engineering,(2)atomic doping engineering,(3)organic framework engineering,(4)inorganic heterojunction engineering,(5)crystal face engineering,and(6)alloying and polarization engineering.Meanwhile,the corresponding catalytic mechanisms of each regulation strategy will also be discussed in detail,aiming to enable researchers to understand the structure-property relationship of the improved Bibased catalysts fundamentally.Finally,the challenges and future opportunities of the Bi-based catalysts in the photoelectrocatalytic CO_(2)RR application field will also be featured from the perspectives of the(1)combination or synergy of multiple regulatory strategies,(2)revealing formation mechanism and realizing controllable synthesis,and(3)in situ multiscale investigation of activation pathways and uncovering the catalytic mechanisms.On the one hand,through the comparative analysis and mechanism explanation of the six major regulatory strategies,a multidimensional knowledge framework of the structure-activity relationship of Bi-based catalysts can be constructed for researchers,which not only deepens the atomic-level understanding of catalytic active sites,charge transport paths,and the adsorption behavior of intermediate products,but also provides theoretical guiding principles for the controllable design of new catalysts;on the other hand,the promising collaborative regulation strategies,controllable synthetic paths,and the in situ multiscale characterization techniques presented in this work provides a paradigm reference for shortening the research and development cycle of high-performance catalysts,conducive to facilitating the transition of photoelectrocatalytic CO_(2)RR technology from the laboratory routes to industrial application.展开更多
Fe-N-C catalysts,as promising non-precious metal alternatives for the oxygen reduction reaction(ORR),still suffer from severe mass transport limitations in proton exchange membrane fuel cells(PEMFCs)due to water flood...Fe-N-C catalysts,as promising non-precious metal alternatives for the oxygen reduction reaction(ORR),still suffer from severe mass transport limitations in proton exchange membrane fuel cells(PEMFCs)due to water flooding of active sites embedded in micropores.Although pore engineering through a selected template is a general strategy,the structural features of an ideal template,particularly those governing the exposure of active sites and thus affecting mass transport,remain elusive.Here,we demonstrate that low-porosity carbon templates maximize the ratio of active sites distributed at or near the surface,thereby enhancing their exposure and accessibility while reducing mass transport resistance during the ORR process.The C_(lp-1)@PPy and C_(lp-2)@PPy(PPy=polypyrrole)catalysts,derived from low-porosity carbon templates,achieve peak power densities of 0.96 and 1.03 W·cm^(-2) under H_(2)/O_(2)and 0.50 and 0.52 W·cm^(-2) under H_(2)/air,demonstrating excellent performance in PEMFC tests.Structural and electrochemical characterizations reveal that the enhanced surface exposure of active sites effectively mitigates mass transport resistance during the ORR,thereby offering a general design principle for overcoming mass transport limitations in Fe-N-C catalysts for PEMFC applications.展开更多
Dual-atom-site catalysts(DASCs)have garnered a lot of interest in the electrocatalysis community because of their atomic usage,stability,activity,and selectivity.This review systematically introduces the latest advanc...Dual-atom-site catalysts(DASCs)have garnered a lot of interest in the electrocatalysis community because of their atomic usage,stability,activity,and selectivity.This review systematically introduces the latest advancements of DASCs for electrocatalytic applications.Design principles of DASCs are first discussed,including atom-atom,atom-cluster,and atom-particle synergy.Then,rational modulation tactics are creatively proposed to speed up the construction of high-performance DASCs for uncovering structure-performance relationships.Moreover,advanced characterization techniques are provided to show the dynamic evolution of dual-atom sites throughout electrocatalysis.Finally,future challenges and perspectives are taken into account.This paper provides useful directions for a better understanding and design of DASCs for eco-friendly energy storage and conversion technologies.展开更多
Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon...Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon neutrality goals.The hydrogenation of CO_(2)to methanol not only enables carbon sequestration and recycling,but also provides a route to produce high value-added fuels and basic chemical feedstocks,holding significant environmental and economic potential.However,this conversion process is thermodynamically and kinetically limited,and traditional catalyst systems(e.g.,Cu/ZnO/Al_(2)O_(3))exhibit inadequate activity,selectivity,and stability under mild conditions.Therefore,the development of novel high-performance catalysts with precisely tunable structures and functionalities is imperative.Metal-organic frameworks(MOFs),as crystalline porous materials with high surface area,tunable pore structures,and diverse metal-ligand compositions,have the great potential in CO_(2)hydrogenation catalysis.Their structural design flexibility allows for the construction of well-dispersed active sites,tailored electronic environments,and enhanced metal-support interactions.This review systematically summarizes the recent advances in MOF-based and MOF-derived catalysts for CO_(2)hydrogenation to methanol,focusing on four design strategies:(1)spatial confinement and in situ construction,(2)defect engineering and ion-exchange,(3)bimetallic synergy and hybrid structure design,and(4)MOF-derived nanomaterial synthesis.These approaches significantly improve CO_(2)conversion and methanol selectivity by optimizing metal dispersion,interfacial structures,and reaction pathways.The reaction mechanism is further explored by focusing on the three main reaction pathways:the formate pathway(HCOO*),the RWGS(Reverse Water Gas Shift reaction)+CO*hydrogenation pathway,and the trans-COOH pathway.In situ spectroscopic studies and density functional theory(DFT)calculations elucidate the formation and transformation of key intermediates,as well as the roles of active sites,metal-support interfaces,oxygen vacancies,and promoters.Additionally,representative catalytic performance data for MOFbased systems are compiled and compared,demonstrating their advantages over traditional catalysts in terms of CO_(2)conversion,methanol selectivity,and space-time yield.Future perspectives for MOF-based CO_(2)hydrogenation catalysts will prioritize two main directions:structural design and mechanistic understanding.The precise construction of active sites through multi-metallic synergy,defect engineering,and interfacial electronic modulation should be made to enhance catalyst selectivity and stability.In addition,advanced in situ characterization techniques combined with theoretical modeling are essential to unravel the detailed reaction mechanisms and intermediate behaviors,thereby guiding rational catalyst design.Moreover,to enable industrial application,challenges related to thermal/hydrothermal stability,catalyst recyclability,and cost-effective large-scale synthesis must be addressed.The development of green,scalable preparation methods and the integration of MOF catalysts into practical reaction systems(e.g.,flow reactors)will be crucial for bridging the gap between laboratory research and commercial deployment.Ultimately,multi-scale structure-performance optimization and catalytic system integration will be vital for accelerating the industrialization of MOF-based CO_(2)-to-methanol technologies.展开更多
The pursuit of alternative fuel generation technologies has gained momentum due to the diminishing reserves of fossil fuels and global warming from increased CO_(2)emission.Among the proposed methods,the hydrogenation...The pursuit of alternative fuel generation technologies has gained momentum due to the diminishing reserves of fossil fuels and global warming from increased CO_(2)emission.Among the proposed methods,the hydrogenation of CO_(2)to produce marketable carbon-based products like methanol and ethanol is a practical approach that offers great potential to reduce CO_(2)emissions.Although significant volumes of methanol are currently produced from CO_(2),developing highly efficient and stable catalysts is crucial for further enhancing conversion and selectivity,thereby reducing process costs.An in-depth examination of the differences and similarities in the reaction pathways for methanol and ethanol production highlights the key factors that drive C-C coupling.Identifying these factors guides us toward developing more effective catalysts for ethanol synthesis.In this paper,we explore how different catalysts,through the production of various intermediates,can initiate the synthesis of methanol or ethanol.The catalytic mechanisms proposed by spectroscopic techniques and theoretical calculations,including operando X-ray methods,FTIR analysis,and DFT calculations,are summarized and presented.The following discussion explores the structural properties and composition of catalysts that influence C-C coupling and optimize the conversion rate of CO_(2)into ethanol.Lastly,the review examines recent catalysts employed for selective methanol and ethanol production,focusing on single-atom catalysts.展开更多
The development of formic acid dehydrogenation materials with high activity and low cost is key to realizing hydrogen energy utilization.Herein,we describe a specific low-loading strategy to construct a high-activity ...The development of formic acid dehydrogenation materials with high activity and low cost is key to realizing hydrogen energy utilization.Herein,we describe a specific low-loading strategy to construct a high-activity Co atom site catalyst for this reaction.Under optimal conditions,the formic acid dehydrogenation performance of Co─Fe dual-atom catalyst(turnover frequency of 2,446.8 h^(−1),hydrogen production rate of 1,015,306.1 mL gCo^(−1)h^(−1))was 300 times greater than that of commercial 5%Pd/C.High-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure spectra,combined with theoretical calculations,confirm that the presence of different active sites(Co single-atom,Co-Co dual-atom,Co─Fe dual-atom)in catalysts is the key factor affecting their catalytic activity.These findings provide a strong scientific basis for the development of single-atom and dual-atom catalysts.展开更多
Xylitol,one of the top twelve chemical building blocks,is commercially synthesized through the xylose hy-drogenation reaction using a metal catalyst.Biochar has emerged as an eco-efficient catalyst support material.In...Xylitol,one of the top twelve chemical building blocks,is commercially synthesized through the xylose hy-drogenation reaction using a metal catalyst.Biochar has emerged as an eco-efficient catalyst support material.In this study,biochar derived from corn stover(BCS)was first used as a metal catalyst support material for xylose hydrogenation into xylitol.The catalyst was prepared by carbonizing corn stover(CS),impregnating the resulting biochar with metal,and reducing the metal-impregnated BCS.The catalyst characteristics were comprehensively explored.The Ru/BCS catalyst was employed in xylose conversion to xylitol at different process temperatures(100-160℃),retention times(3-12 h),H_(2)pressures(2-5 MPa),and Ru contents(1-5%).The highest xylitol yield(87.0 wt.%)and selectivity(91.6%)were derived at 120℃ for 6 h under 4 MPa H_(2)using 5%Ru.Interestingly,the Ru/BCS catalyst showed high stability under the promising process condition.Additionally,xylitol production from hydrolysates enriched with CS xylose was subsequently explored.On the other hand,the catalyst characterization results revealed that the superior catalytic efficiency of 5Ru/BCS was mainly due to the metal nanoparticles embedded in the biochar.Additionally,BCS proved to be an outstanding support material for a bimetallic hydrogenation catalyst(Ru-Ni/BCS).Therefore,these results indicate that BCS can be a competitive support material for metal hydrogenation catalysts,enhancing environmental friendliness and potentially being employed in industrial-scale xylitol production.展开更多
Electrochemical nitrogen reduction reaction(ENRR)is emerging as a favorable option to the power-intensive Haber-Bosch process for ammonia synthesis.However,obstacles such as poor selectivity,low production rates,and c...Electrochemical nitrogen reduction reaction(ENRR)is emerging as a favorable option to the power-intensive Haber-Bosch process for ammonia synthesis.However,obstacles such as poor selectivity,low production rates,and competition against the hydrogen evolution reaction hinder its practical implementation.To address these,the design of highly active catalysts is critical.Single-atom catalysts(SACs)have shown great potential because of their maximized atom utilization,but their limited stability and low metal loading restrict their performances.On the other hand,dual-atom catalysts(DACs)are atomic catalysts with two metal atoms nearby and offer enhanced electrocatalytic performances by aligning with the N≡N bond to enhance N2 reduction efficiency,potentially overcoming the limitations of SAC.This review discusses recent advances in SACs and more importantly DACs for ENRR,highlighting their advantages,limitations,and the need for advanced characterization techniques to better understand catalyst behavior.The review concludes by underscoring the importance of research to optimize these catalysts for efficient and sustainable nitrogen fixation.展开更多
Carbon monoxide(CO)oxidation is crucial for pollutant removal and hydrogen purification.In recent years,copper–cerium(Cu–Ce)-mixed oxide catalysts have attracted significant attention due to their excellent activity a...Carbon monoxide(CO)oxidation is crucial for pollutant removal and hydrogen purification.In recent years,copper–cerium(Cu–Ce)-mixed oxide catalysts have attracted significant attention due to their excellent activity and stability in CO oxida-tion.This study presents an innovative,environmentally friendly electrosynthesis method for producing stable,structured Cu–Ce catalysts in mesh form.This approach addresses the limitations of traditional pellet catalysts,such as fragility and poor thermal conductivity.The results demonstrated that incorporating cerium(Ce)enhanced the catalytic activity for CO oxidation threefold.A series of in situ characterizations revealed that the introduction of Ce led to the formation of a Cu–Ce mixed oxide solid solution,which significantly improved catalytic performance.Furthermore,higher pretreatment tem-peratures facilitated the decomposition of Ce compounds(nitrate and hydroxide),which promotes the formation of Cu–Ce solid solutions and increases the concentration of active intermediate species(Cu^(+)-CO)during the reaction.This process ultimately enhanced the catalyst’s activity.展开更多
Carbon dioxide(CO_(2))can be efficiently converted and utilized through the CO_(2) methanation reaction,which has significant potential benefits for the environment and the economy.The contradiction between the thermo...Carbon dioxide(CO_(2))can be efficiently converted and utilized through the CO_(2) methanation reaction,which has significant potential benefits for the environment and the economy.The contradiction between the thermodynamics and kinetics of the CO_(2) methanation reaction process leads to low CO_(2) conversion at 200-350℃and low methane selectivity at 350-500℃.The utilization of catalysts can solve the contradiction between kinetics and thermodynamics,achieving high CO_(2) methanation efficiency at low temperatures.However,the poor thermal conductivity of powder catalysts leads to the rapid accumulation of heat,resulting in the formation of hot spots,which can cause the sintering or even deactivation of active species.To solve this problem,researchers have focused on monolithic catalysts with integrated reaction systems.This review categorizes the monolithic catalysts into two main groups based on their unique characteristics,namely structured catalysts and catalytic membrane reactors.The characteristics of these monolithic catalysts,commonly used support materials,preparation techniques,and their applications in the CO_(2) methanation reaction are discussed in depth.These studies provide theoretical basis and practical guidance for the design and optimization of structured catalysts and catalytic membrane reactors.Finally,challenges and prospects in the application of monolithic catalysts for the CO_(2) methanation reaction are proposed for the future development.展开更多
Supported metal catalysts are the backbone of heterogeneous catalysis,playing a crucial role in the modern chemical industry.Metal-support interactions(MSIs)are known important in determining the catalytic performance...Supported metal catalysts are the backbone of heterogeneous catalysis,playing a crucial role in the modern chemical industry.Metal-support interactions(MSIs)are known important in determining the catalytic performance of supported metal catalysts.This is particularly true for single-atom catalysts(SACs)and pseudo-single-atom catalysts(pseudo-SACs),where all metal atoms are dispersed on,and interact directly with the support.Consequently,the MSI of SACs and pseudo-SACs are theoretically more sensitive to modulation compared to that of traditional nanoparticle catalysts.In this work,we experimentally demonstrated this hypothesis by an observed size-dependent MSI modulation.We fabricated CoFe_(2)O_(4) supported Pt pseudo-SACs and nanoparticle catalysts,followed by a straightforward water treatment process.It was found that the covalent strong metal-support interaction(CMSI)in pseudo-SACs can be weakened,leading to a significant activity improvement in methane combustion reaction.This finding aligns with our recent observation of CoFe_(2)O_(4) supported Pt SACs.By contrast,the MSI in Pt nanoparticle catalyst was barely affected by the water treatment,giving rise to almost unchanged catalytic performance.This work highlights the critical role of metal size in determining the MSI modulation,offering a novel strategy for tuning the catalytic performance of SACs and pseudo-SACs by fine-tuning their MSIs.展开更多
Developing cost-effective and high-performance catalyst systems for dry reforming of methane(DRM)is crucial for producing hydrogen(H_(2))sustainably.Herein,we investigate using iron(Fe)as a promoter and major alumina ...Developing cost-effective and high-performance catalyst systems for dry reforming of methane(DRM)is crucial for producing hydrogen(H_(2))sustainably.Herein,we investigate using iron(Fe)as a promoter and major alumina support in Ni-based catalysts to improve their DRM performance.The addition of iron as a promotor was found to add reducible iron species along with reducible NiO species,enhance the basicity and induce the deposition of oxidizable carbon.By incorporating 1 wt.%Fe into a 5Ni/10ZrAl catalyst,a higher CO_(2) interaction and formation of reducible"NiO-species having strong interaction with support"was observed,which led to an∼80%H_(2) yield in 420 min of Time on Stream(TOS).Further increasing the Fe content to 2 wt.%led to the formation of additional reducible iron oxide species and a noticeable rise in H_(2) yield up to 84%.Despite the severe weight loss on Fe-promoted catalysts,high H_(2) yield was maintained due to the proper balance between the rate of CH_(4) decomposition and the rate of carbon deposit diffusion.Finally,incorporating 3 wt.%Fe into the 5Ni/10ZrAl catalyst resulted in the highest CO_(2) interaction,wide presence of reducible NiO-species,minimumgraphitic deposit and an 87%H_(2) yield.Our findings suggest that ironpromoted zirconia-alumina-supported Ni catalysts can be a cheap and excellent catalytic system for H_(2) production via DRM.展开更多
基金supported by National Natural Science Foundation of China(U20A20130)Fundamental Research Funds for the Central Universities(FRF-EYIT-23-07).
文摘Ammonia selective catalytic reduction(NH_(3)-SCR)is the most widely used technology in thefield of industrialflue gas denitrification.However,the presence of heavy metals influe gas can seriously affect the performance of SCR catalysts,leading to their deactivation or even failure.Therefore,it is of great significance to deeply study the poisoning mechanism of SCR catalysts under the action of heavy metals and how to enhance their resistance to poisoning.This article reviews the reaction mechanism of NH_(3)-SCR technology,compares the impact of heavy metals on the activity of different SCR catalysts,and then discusses in detail the poisoning mechanism of SCR catalysts by heavy metals,including pore blockage,reduction of specific surface area,and destruction of active centers caused by heavy metal deposition,all of which jointly lead to the physical or chemical poisoning of the catalyst.Meanwhile,the mechanism of action when multiple toxicants coexist was analyzed.To effectively address these challenges,the article further summarizes various methods to improve the catalyst's resistance to heavy metal poisoning,such as element doping,structural optimization,and carrier addition,which significantly enhance the heavy metal resistance of the catalyst.Finally,the article provides a prospective analysis of the challenges faced by NH_(3)-SCR catalysts in anti-heavy metal poisoning technology,emphasizing the necessity of in-depth research on the poisoning mechanism,exploration of the mechanism of synergistic action of multiple pollutants,development of comprehensive anti-poisoning strategies,and research on catalyst regeneration technology,in order to promote the development of efficient anti-heavy metal poisoning NH_(3)-SCR catalysts.
基金supported by the National Natural Science Foundation of China(21473064)~~
文摘Contaminants(K,Na,Ca,and Mg)were introduced into Cu-SAPO-18 via incipient wetness impregnation to investigate their effect on the selective catalytic reduction of NOx with NH3(NH3-SCR)over Cu-SAPO-18.After the introduction of contaminants into Cu-SAPO-18,the quantity of acidic sites and Cu^2+ species in catalyst decreases owing to the replacement of H^+ and Cu^2+ by K^+,Na^+,Ca^2+,and Mg^2+.Furthermore,the loss of isolated Cu^2+ induces the generation of CuO and CuAl2O4-like phases,which causes further loss in the Brunauer-Emmett-Teller surface area of the catalyst.Consequently,the deNOx performance of the contaminated Cu-SAPO-18 catalysts drops.Such decline in NH3-SCR performance becomes more pronounced by increasing the contaminant contents from 0.5 to 1.0 mmol/gcatal.In addition,the deactivation influence of the contaminants on Cu-SAPO-18 is presented in the order of K>Na>Ca>Mg,which is consistent with the order of reduction of acidic sites.To a certain degree,the effect of the acidic sites on the deactivation of Cu-SAPO-18 might be more significant than that of isolated Cu2+ and the catalyst framework.Moreover,kinetic analysis of NH3-SCR was conducted,and the results indicate that there is no influence of contaminants on the NH3-SCR mechanism.
基金financially supported by the National Natural Science Foundation of China(21573167,21633008,91545205,21125312)National Key Research and Development Program(2016YFB0101203)+2 种基金the National Basic Research Program(2012CB932800,2012CB215500)the Doctoral Fund of Ministry of Education of China(20110141130002)the Fundamental Research Funds for the Central Universities(2014203020207)
文摘An environmentally friendly precursor, adenosine, has been used as a dual source of C and N to synthesize nitrogen-doped carbon catalyst with/without Fe. A hydrothermal carbonization method has been used and water is the carbonization media. The morphology of samples with/without Fe component has been compared by HRTEM, and the result shows that Fe can promote the graphitization of carbon. Further electro-chemical test shows that the oxygen reduction reaction（ORR） catalytic activity of Fe-containing sample（C–Fe N） is much higher than that of the Fe-free sample（C–N）. Additionally, the intermediates of C–Fe N formed during each synthetic procedure have been thoroughly characterized by multiple methods,and the function of each procedure has been discussed. The C–Fe N sample exhibits high electro-catalytic stability and superior electro-catalytic activity toward ORR in alkaline media, with its half-wave potential 20 mV lower than that of commercial Pt/C（40 wt%）. It is further incorporated into alkaline polymer electrolyte fuel cell（APEFC） as the cathode material and led to a power density of 100 m W/cm;.
基金Sponsored by Postdoctoral Science Foundation of China(2007042031)
文摘In order to reduce oxides of nitrogen （NOx） emanated from a diesel engine, a comprehensive urea selective catalyst reduction （SCR） DeNOx catalyst was modeled in which numerical simulations were used as a complementary tool for the experimental investigations to make the design decisions, and hence shorten the de- velopment process. In this approach, relevant conversion reactions were studied in 1D model, and the parame- ters obtained in this way were transferred to 3D simulations. According to the results of the study, the conver- sion of NO and NO2 increased with the increase in monolith solid temperature. With the increase in the ratio of NO2/NOx the conversion of NO, NO2 and NOx increased resulting in maximum reduction of NOxat the ratio of 1; beyond this ratio, the conversion of NO2 and NOx decreased; however, NO continued to be converted till the ratio was 1.8. The conversion of NOx decreased with the increase in space velocity.
基金funded by the Innovative Research Group Project of the National Natural Science Foundation of China(52121004)the Research Development Fund(No.RDF-21-02-060)by Xi’an Jiaotong-Liverpool University+1 种基金support received from the Suzhou Industrial Park High Quality Innovation Platform of Functional Molecular Materials and Devices(YZCXPT2023105)the XJTLU Advanced Materials Research Center(AMRC).
文摘Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction(ORR)and chlorideinduced degradation over conventional catalysts.In this study,we proposed a universal synthetic strategy to construct heteroatom axially coordinated Fe–N_(4) single-atom seawater catalyst materials(Cl–Fe–N_(4) and S–Fe–N_(4)).X-ray absorption spectroscopy confirmed their five-coordinated square pyramidal structure.Systematic evaluation of catalytic activities revealed that compared with S–Fe–N_(4),Cl–Fe–N_(4) exhibits smaller electrochemical active surface area and specific surface area,yet demonstrates higher limiting current density(5.8 mA cm^(−2)).The assembled zinc-air batteries using Cl–Fe–N_(4) showed superior power density(187.7 mW cm^(−2) at 245.1 mA cm^(−2)),indicating that Cl axial coordination more effectively enhances the intrinsic ORR activity.Moreover,Cl–Fe–N_(4) demonstrates stronger Cl−poisoning resistance in seawater environments.Chronoamperometry tests and zinc-air battery cycling performance evaluations confirmed its enhanced stability.Density functional theory calculations revealed that the introduction of heteroatoms in the axial direction regulates the electron center of Fe single atom,leading to more active reaction intermediates and increased electron density of Fe single sites,thereby enhancing the reduction in adsorbed intermediates and hence the overall ORR catalytic activity.
基金Supported by the Science and Technology Cooperation and Exchange special project of Cooperation of Shanxi Province(202404041101014)the Fundamental Research Program of Shanxi Province(202403021212333)+3 种基金the Joint Funds of the National Natural Science Foundation of China(U24A20555)the Lvliang Key R&D of University-Local Cooperation(2023XDHZ10)the Initiation Fund for Doctoral Research of Taiyuan University of Science and Technology(20242026)the Outstanding Doctor Funding Award of Shanxi Province(20242080).
文摘To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.
基金the National Natural Science Foundation of China(No.22379069)Fundamental Research Funds for the Central Universities(No.30922010304).
文摘Sluggish sulfur redox kinetics remain a critical bottleneck in the advancement of high-performance lithiumsulfur batteries(LSBs).Single-atom catalysts(SACs)offer a promising solution to this limitation,particularly when their coordination structures are carefully engineered.Here,we develop a chromium-based SAC featuring a unique undercoordinated CrN_(3) configuration to boost sulfur electrochemistry.Compared with conventional CrN_(4),the CrN_(3) motif lowers 3d orbital occupancy and meanwhile activates the in-plane hybridizations with S 3p orbitals upon interaction with polysulfides,contributing to moderate adsorption strength and reduced energy barriers for bidirectional sulfur conversions.Additionally,the integration of the two-dimensional(2D)porous framework ensures abundant electrochemically active surfaces and efficiently exposed active sites.As a result,CrN_(3)-based cells demonstrate fast and durable sulfur redox reactions,enabling an ultralow capacity decay of 0.0075%per cycle over 1000 cycles and a high-rate capability of 651.9 mAh·g^(-1)at 5 C.The CrN_(3) catalyst retains robust catalytic efficiency under demanding conditions,delivering a high areal capacity of 5.53 mAh·cm^(-2) at high sulfur loading and lean electrolyte.This work establishes a compelling paradigm of SAC coordination engineering for designing advanced sulfur electrocatalysts for next-generation LSBs.
基金supported by the Australian Research Council(ARC)Projects(DP220101139,DP220101142,and LP240100542).
文摘High‐entropy amorphous catalysts(HEACs)integrate multielement synergy with structural disorder,making them promising candidates for water splitting.Their distinctive features—including flexible coordination environments,tunable electronic structures,abundant unsaturated active sites,and dynamic structural reassembly—collectively enhance electrochemical activity and durability under operating conditions.This review summarizes recent advances in HEACs for hydrogen evolution,oxygen evolution,and overall water splitting,highlighting their disorder-driven advantages over crystalline counterparts.Catalytic performance benchmarks are presented,and mechanistic insights are discussed,focusing on how multimetallic synergy,amorphization effect,and in‐situ reconstruction cooperatively regulate reaction pathways.These insights provide guidance for the rational design of next‐generation amorphous high‐entropy electrocatalysts with improved efficiency and durability.
基金supports from the National Natural Science Foundation of China(Grant Nos.12305372 and 22376217)the National Key Research&Development Program of China(Grant Nos.2022YFA1603802 and 2022YFB3504100)+1 种基金the projects of the key laboratory of advanced energy materials chemistry,ministry of education(Nankai University)key laboratory of Jiangxi Province for persistent pollutants prevention control and resource reuse(2023SSY02061)are gratefully acknowledged.
文摘Using photoelectrocatalytic CO_(2) reduction reaction(CO_(2)RR)to produce valuable fuels is a fascinating way to alleviate environmental issues and energy crises.Bismuth-based(Bi-based)catalysts have attracted widespread attention for CO_(2)RR due to their high catalytic activity,selectivity,excellent stability,and low cost.However,they still need to be further improved to meet the needs of industrial applications.This review article comprehensively summarizes the recent advances in regulation strategies of Bi-based catalysts and can be divided into six categories:(1)defect engineering,(2)atomic doping engineering,(3)organic framework engineering,(4)inorganic heterojunction engineering,(5)crystal face engineering,and(6)alloying and polarization engineering.Meanwhile,the corresponding catalytic mechanisms of each regulation strategy will also be discussed in detail,aiming to enable researchers to understand the structure-property relationship of the improved Bibased catalysts fundamentally.Finally,the challenges and future opportunities of the Bi-based catalysts in the photoelectrocatalytic CO_(2)RR application field will also be featured from the perspectives of the(1)combination or synergy of multiple regulatory strategies,(2)revealing formation mechanism and realizing controllable synthesis,and(3)in situ multiscale investigation of activation pathways and uncovering the catalytic mechanisms.On the one hand,through the comparative analysis and mechanism explanation of the six major regulatory strategies,a multidimensional knowledge framework of the structure-activity relationship of Bi-based catalysts can be constructed for researchers,which not only deepens the atomic-level understanding of catalytic active sites,charge transport paths,and the adsorption behavior of intermediate products,but also provides theoretical guiding principles for the controllable design of new catalysts;on the other hand,the promising collaborative regulation strategies,controllable synthetic paths,and the in situ multiscale characterization techniques presented in this work provides a paradigm reference for shortening the research and development cycle of high-performance catalysts,conducive to facilitating the transition of photoelectrocatalytic CO_(2)RR technology from the laboratory routes to industrial application.
基金the National Key R&D Program of China(No.2024YFA1509500)the National Natural Science Foundation of China(No.22479010)+5 种基金the financial support from the Chongqing Municipal Natural Science Foundation(No.CSTB2024NSCQJQX0034)Shenzhen Science and Technology Program(No.KJZD20240903101359020)the financial support from the National Natural Science Foundation of China(No.22372004)the support from the Experimental Center of Advanced Materials of the Beijing Institute of Technologythe technical support from Biological and Medical Engineering Core Facilities of Beijing Institute of Technologythe Analysis and Testing Center of Beijing Institute of Technology.
文摘Fe-N-C catalysts,as promising non-precious metal alternatives for the oxygen reduction reaction(ORR),still suffer from severe mass transport limitations in proton exchange membrane fuel cells(PEMFCs)due to water flooding of active sites embedded in micropores.Although pore engineering through a selected template is a general strategy,the structural features of an ideal template,particularly those governing the exposure of active sites and thus affecting mass transport,remain elusive.Here,we demonstrate that low-porosity carbon templates maximize the ratio of active sites distributed at or near the surface,thereby enhancing their exposure and accessibility while reducing mass transport resistance during the ORR process.The C_(lp-1)@PPy and C_(lp-2)@PPy(PPy=polypyrrole)catalysts,derived from low-porosity carbon templates,achieve peak power densities of 0.96 and 1.03 W·cm^(-2) under H_(2)/O_(2)and 0.50 and 0.52 W·cm^(-2) under H_(2)/air,demonstrating excellent performance in PEMFC tests.Structural and electrochemical characterizations reveal that the enhanced surface exposure of active sites effectively mitigates mass transport resistance during the ORR,thereby offering a general design principle for overcoming mass transport limitations in Fe-N-C catalysts for PEMFC applications.
基金supported by the National Natural Science Foundation of China(Nos.92580106 and 22075099).
文摘Dual-atom-site catalysts(DASCs)have garnered a lot of interest in the electrocatalysis community because of their atomic usage,stability,activity,and selectivity.This review systematically introduces the latest advancements of DASCs for electrocatalytic applications.Design principles of DASCs are first discussed,including atom-atom,atom-cluster,and atom-particle synergy.Then,rational modulation tactics are creatively proposed to speed up the construction of high-performance DASCs for uncovering structure-performance relationships.Moreover,advanced characterization techniques are provided to show the dynamic evolution of dual-atom sites throughout electrocatalysis.Finally,future challenges and perspectives are taken into account.This paper provides useful directions for a better understanding and design of DASCs for eco-friendly energy storage and conversion technologies.
基金Supported by the National Key Research and Development Program of China(2023YFB4104500,2023YFB4104502)the National Natural Science Foundation of China(22138013)the Taishan Scholar Project(ts201712020).
文摘Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon neutrality goals.The hydrogenation of CO_(2)to methanol not only enables carbon sequestration and recycling,but also provides a route to produce high value-added fuels and basic chemical feedstocks,holding significant environmental and economic potential.However,this conversion process is thermodynamically and kinetically limited,and traditional catalyst systems(e.g.,Cu/ZnO/Al_(2)O_(3))exhibit inadequate activity,selectivity,and stability under mild conditions.Therefore,the development of novel high-performance catalysts with precisely tunable structures and functionalities is imperative.Metal-organic frameworks(MOFs),as crystalline porous materials with high surface area,tunable pore structures,and diverse metal-ligand compositions,have the great potential in CO_(2)hydrogenation catalysis.Their structural design flexibility allows for the construction of well-dispersed active sites,tailored electronic environments,and enhanced metal-support interactions.This review systematically summarizes the recent advances in MOF-based and MOF-derived catalysts for CO_(2)hydrogenation to methanol,focusing on four design strategies:(1)spatial confinement and in situ construction,(2)defect engineering and ion-exchange,(3)bimetallic synergy and hybrid structure design,and(4)MOF-derived nanomaterial synthesis.These approaches significantly improve CO_(2)conversion and methanol selectivity by optimizing metal dispersion,interfacial structures,and reaction pathways.The reaction mechanism is further explored by focusing on the three main reaction pathways:the formate pathway(HCOO*),the RWGS(Reverse Water Gas Shift reaction)+CO*hydrogenation pathway,and the trans-COOH pathway.In situ spectroscopic studies and density functional theory(DFT)calculations elucidate the formation and transformation of key intermediates,as well as the roles of active sites,metal-support interfaces,oxygen vacancies,and promoters.Additionally,representative catalytic performance data for MOFbased systems are compiled and compared,demonstrating their advantages over traditional catalysts in terms of CO_(2)conversion,methanol selectivity,and space-time yield.Future perspectives for MOF-based CO_(2)hydrogenation catalysts will prioritize two main directions:structural design and mechanistic understanding.The precise construction of active sites through multi-metallic synergy,defect engineering,and interfacial electronic modulation should be made to enhance catalyst selectivity and stability.In addition,advanced in situ characterization techniques combined with theoretical modeling are essential to unravel the detailed reaction mechanisms and intermediate behaviors,thereby guiding rational catalyst design.Moreover,to enable industrial application,challenges related to thermal/hydrothermal stability,catalyst recyclability,and cost-effective large-scale synthesis must be addressed.The development of green,scalable preparation methods and the integration of MOF catalysts into practical reaction systems(e.g.,flow reactors)will be crucial for bridging the gap between laboratory research and commercial deployment.Ultimately,multi-scale structure-performance optimization and catalytic system integration will be vital for accelerating the industrialization of MOF-based CO_(2)-to-methanol technologies.
基金the Canadian NRCan OERD Energy Innovation Programthe Natural Sciences and Engineering Research Council of Canada,and the Carbon Solution Program for their financial support.
文摘The pursuit of alternative fuel generation technologies has gained momentum due to the diminishing reserves of fossil fuels and global warming from increased CO_(2)emission.Among the proposed methods,the hydrogenation of CO_(2)to produce marketable carbon-based products like methanol and ethanol is a practical approach that offers great potential to reduce CO_(2)emissions.Although significant volumes of methanol are currently produced from CO_(2),developing highly efficient and stable catalysts is crucial for further enhancing conversion and selectivity,thereby reducing process costs.An in-depth examination of the differences and similarities in the reaction pathways for methanol and ethanol production highlights the key factors that drive C-C coupling.Identifying these factors guides us toward developing more effective catalysts for ethanol synthesis.In this paper,we explore how different catalysts,through the production of various intermediates,can initiate the synthesis of methanol or ethanol.The catalytic mechanisms proposed by spectroscopic techniques and theoretical calculations,including operando X-ray methods,FTIR analysis,and DFT calculations,are summarized and presented.The following discussion explores the structural properties and composition of catalysts that influence C-C coupling and optimize the conversion rate of CO_(2)into ethanol.Lastly,the review examines recent catalysts employed for selective methanol and ethanol production,focusing on single-atom catalysts.
基金supported by the National Natural Science Foundation of China(21603054,31671930)the Natural Science Foundation of Hebei Province(B2016204136,B2016204131)+3 种基金the Young Top-notch Talents Foundation of Hebei Provincial Universities(BJ2016027)the Innovation and entrepreneurship training program for college students of Hebei Agricultural University(s202010086046,2019085)the Scientific Research Development Fund project of Hebei Agricultural University(JY2020028)the Innovation and entrepreneurship training program for college students of Hebei Agricultural University(2025019,2025198).
文摘The development of formic acid dehydrogenation materials with high activity and low cost is key to realizing hydrogen energy utilization.Herein,we describe a specific low-loading strategy to construct a high-activity Co atom site catalyst for this reaction.Under optimal conditions,the formic acid dehydrogenation performance of Co─Fe dual-atom catalyst(turnover frequency of 2,446.8 h^(−1),hydrogen production rate of 1,015,306.1 mL gCo^(−1)h^(−1))was 300 times greater than that of commercial 5%Pd/C.High-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure spectra,combined with theoretical calculations,confirm that the presence of different active sites(Co single-atom,Co-Co dual-atom,Co─Fe dual-atom)in catalysts is the key factor affecting their catalytic activity.These findings provide a strong scientific basis for the development of single-atom and dual-atom catalysts.
基金supported by Specific League Funds from Mahidol University,and partially supported by Office of the Permanent Secretary,Ministry of Higher Education,Science,Research and Inno-vation(OPS MHESI),Thailand Science Research and Innovation(TSRI)(Grant No.RGNS 63-167).
文摘Xylitol,one of the top twelve chemical building blocks,is commercially synthesized through the xylose hy-drogenation reaction using a metal catalyst.Biochar has emerged as an eco-efficient catalyst support material.In this study,biochar derived from corn stover(BCS)was first used as a metal catalyst support material for xylose hydrogenation into xylitol.The catalyst was prepared by carbonizing corn stover(CS),impregnating the resulting biochar with metal,and reducing the metal-impregnated BCS.The catalyst characteristics were comprehensively explored.The Ru/BCS catalyst was employed in xylose conversion to xylitol at different process temperatures(100-160℃),retention times(3-12 h),H_(2)pressures(2-5 MPa),and Ru contents(1-5%).The highest xylitol yield(87.0 wt.%)and selectivity(91.6%)were derived at 120℃ for 6 h under 4 MPa H_(2)using 5%Ru.Interestingly,the Ru/BCS catalyst showed high stability under the promising process condition.Additionally,xylitol production from hydrolysates enriched with CS xylose was subsequently explored.On the other hand,the catalyst characterization results revealed that the superior catalytic efficiency of 5Ru/BCS was mainly due to the metal nanoparticles embedded in the biochar.Additionally,BCS proved to be an outstanding support material for a bimetallic hydrogenation catalyst(Ru-Ni/BCS).Therefore,these results indicate that BCS can be a competitive support material for metal hydrogenation catalysts,enhancing environmental friendliness and potentially being employed in industrial-scale xylitol production.
基金supported by the National Research Foundation of Korea(2022R1C1C2005786,RS-2023-00256106,RS-2023-00207831,RS-2024-00346153).
文摘Electrochemical nitrogen reduction reaction(ENRR)is emerging as a favorable option to the power-intensive Haber-Bosch process for ammonia synthesis.However,obstacles such as poor selectivity,low production rates,and competition against the hydrogen evolution reaction hinder its practical implementation.To address these,the design of highly active catalysts is critical.Single-atom catalysts(SACs)have shown great potential because of their maximized atom utilization,but their limited stability and low metal loading restrict their performances.On the other hand,dual-atom catalysts(DACs)are atomic catalysts with two metal atoms nearby and offer enhanced electrocatalytic performances by aligning with the N≡N bond to enhance N2 reduction efficiency,potentially overcoming the limitations of SAC.This review discusses recent advances in SACs and more importantly DACs for ENRR,highlighting their advantages,limitations,and the need for advanced characterization techniques to better understand catalyst behavior.The review concludes by underscoring the importance of research to optimize these catalysts for efficient and sustainable nitrogen fixation.
基金supported by the National Key R&D Program of China(No.2022YFB3805504)the National Natu-ral Science Foundation of China(No.22078089)+2 种基金the Shanghai Pilot Program for Basic Research(No.22TQ1400100-7)the Basic Research Program of Science and Technology Commission of Shanghai Munici-pality(No.22JC1400600)the Fundamental Research Funds for the Central Universities.
文摘Carbon monoxide(CO)oxidation is crucial for pollutant removal and hydrogen purification.In recent years,copper–cerium(Cu–Ce)-mixed oxide catalysts have attracted significant attention due to their excellent activity and stability in CO oxida-tion.This study presents an innovative,environmentally friendly electrosynthesis method for producing stable,structured Cu–Ce catalysts in mesh form.This approach addresses the limitations of traditional pellet catalysts,such as fragility and poor thermal conductivity.The results demonstrated that incorporating cerium(Ce)enhanced the catalytic activity for CO oxidation threefold.A series of in situ characterizations revealed that the introduction of Ce led to the formation of a Cu–Ce mixed oxide solid solution,which significantly improved catalytic performance.Furthermore,higher pretreatment tem-peratures facilitated the decomposition of Ce compounds(nitrate and hydroxide),which promotes the formation of Cu–Ce solid solutions and increases the concentration of active intermediate species(Cu^(+)-CO)during the reaction.This process ultimately enhanced the catalyst’s activity.
基金the National Natural Science Foundation of China(22325804 and 22308148)the Natural Science Foundation of Jiangsu Province(BK20230344)+1 种基金the Natural Science Research Project of Jiangsu University(22KJB610001)the Jiangsu Funding Program for Excellent Postdoctoral Talent(2023ZB505)。
文摘Carbon dioxide(CO_(2))can be efficiently converted and utilized through the CO_(2) methanation reaction,which has significant potential benefits for the environment and the economy.The contradiction between the thermodynamics and kinetics of the CO_(2) methanation reaction process leads to low CO_(2) conversion at 200-350℃and low methane selectivity at 350-500℃.The utilization of catalysts can solve the contradiction between kinetics and thermodynamics,achieving high CO_(2) methanation efficiency at low temperatures.However,the poor thermal conductivity of powder catalysts leads to the rapid accumulation of heat,resulting in the formation of hot spots,which can cause the sintering or even deactivation of active species.To solve this problem,researchers have focused on monolithic catalysts with integrated reaction systems.This review categorizes the monolithic catalysts into two main groups based on their unique characteristics,namely structured catalysts and catalytic membrane reactors.The characteristics of these monolithic catalysts,commonly used support materials,preparation techniques,and their applications in the CO_(2) methanation reaction are discussed in depth.These studies provide theoretical basis and practical guidance for the design and optimization of structured catalysts and catalytic membrane reactors.Finally,challenges and prospects in the application of monolithic catalysts for the CO_(2) methanation reaction are proposed for the future development.
文摘Supported metal catalysts are the backbone of heterogeneous catalysis,playing a crucial role in the modern chemical industry.Metal-support interactions(MSIs)are known important in determining the catalytic performance of supported metal catalysts.This is particularly true for single-atom catalysts(SACs)and pseudo-single-atom catalysts(pseudo-SACs),where all metal atoms are dispersed on,and interact directly with the support.Consequently,the MSI of SACs and pseudo-SACs are theoretically more sensitive to modulation compared to that of traditional nanoparticle catalysts.In this work,we experimentally demonstrated this hypothesis by an observed size-dependent MSI modulation.We fabricated CoFe_(2)O_(4) supported Pt pseudo-SACs and nanoparticle catalysts,followed by a straightforward water treatment process.It was found that the covalent strong metal-support interaction(CMSI)in pseudo-SACs can be weakened,leading to a significant activity improvement in methane combustion reaction.This finding aligns with our recent observation of CoFe_(2)O_(4) supported Pt SACs.By contrast,the MSI in Pt nanoparticle catalyst was barely affected by the water treatment,giving rise to almost unchanged catalytic performance.This work highlights the critical role of metal size in determining the MSI modulation,offering a novel strategy for tuning the catalytic performance of SACs and pseudo-SACs by fine-tuning their MSIs.
基金The authors would like to extend their sincere appreciation to Researchers Supporting Project number (RSP2023R368)King Saud University,Riyadh,Saudi Arabia.RK,NP,VKS acknowledge Indus University,Ahmedabad,for supporting research.Dr.Ahmed I.Osman and Prof.David W.Rooney wish to acknowledge the support of The Bryden Centre project (Project ID VA5048)。
文摘Developing cost-effective and high-performance catalyst systems for dry reforming of methane(DRM)is crucial for producing hydrogen(H_(2))sustainably.Herein,we investigate using iron(Fe)as a promoter and major alumina support in Ni-based catalysts to improve their DRM performance.The addition of iron as a promotor was found to add reducible iron species along with reducible NiO species,enhance the basicity and induce the deposition of oxidizable carbon.By incorporating 1 wt.%Fe into a 5Ni/10ZrAl catalyst,a higher CO_(2) interaction and formation of reducible"NiO-species having strong interaction with support"was observed,which led to an∼80%H_(2) yield in 420 min of Time on Stream(TOS).Further increasing the Fe content to 2 wt.%led to the formation of additional reducible iron oxide species and a noticeable rise in H_(2) yield up to 84%.Despite the severe weight loss on Fe-promoted catalysts,high H_(2) yield was maintained due to the proper balance between the rate of CH_(4) decomposition and the rate of carbon deposit diffusion.Finally,incorporating 3 wt.%Fe into the 5Ni/10ZrAl catalyst resulted in the highest CO_(2) interaction,wide presence of reducible NiO-species,minimumgraphitic deposit and an 87%H_(2) yield.Our findings suggest that ironpromoted zirconia-alumina-supported Ni catalysts can be a cheap and excellent catalytic system for H_(2) production via DRM.
