Correction to:J.Iron Steel Res.Int.https://doi.org/10.1007/s42243-025-01545-x The publication of this article unfortunately contained mistakes.Equation(14)was not correct.The corrected equation is given below.
High-throughput transcriptomics has evolved from bulk RNA-seq to single-cell and spatial profiling,yet its clinical translation still depends on effective integration across diverse omics and data modalities.Emerging ...High-throughput transcriptomics has evolved from bulk RNA-seq to single-cell and spatial profiling,yet its clinical translation still depends on effective integration across diverse omics and data modalities.Emerging foundation models and multimodal learning frameworks are enabling scalable and transferable representations of cellular states,while advances in interpretability and real-world data integration are bridging the gap between discovery and clinical application.This paper outlines a concise roadmap for AI-driven,transcriptome-centered multi-omics integration in precision medicine(Figure 1).展开更多
0 INTRODUCTION Earth science is a natural science concerned with the composition,dynamics,spatiotemporal evolution,and formation mechanisms of Earth materials(Chen and Yang,2023).Traditional Earth science research has...0 INTRODUCTION Earth science is a natural science concerned with the composition,dynamics,spatiotemporal evolution,and formation mechanisms of Earth materials(Chen and Yang,2023).Traditional Earth science research has largely been discipline-based,relying on field investigations,data collection,experimental analyses,and data interpretation to study individual components of the Earth system.展开更多
The authors consider the issue of hypothesis testing in varying-coefficient regression models with high-dimensional data.Utilizing kernel smoothing techniques,the authors propose a locally concerned U-statistic method...The authors consider the issue of hypothesis testing in varying-coefficient regression models with high-dimensional data.Utilizing kernel smoothing techniques,the authors propose a locally concerned U-statistic method to assess the overall significance of the coefficients.The authors establish that the proposed test is asymptotically normal under both the null hypothesis and local alternatives.Based on the locally concerned U-statistic,the authors further develop a globally concerned U-statistic to test whether the coefficient function is zero.A stochastic perturbation method is employed to approximate the distribution of the globally concerned test statistic.Monte Carlo simulations demonstrate the validity of the proposed test in finite samples.展开更多
Earth’s internal core and crustal magnetic fields,as measured by geomagnetic satellites like MSS-1(Macao Science Satellite-1)and Swarm,are vital for understanding core dynamics and tectonic evolution.To model these i...Earth’s internal core and crustal magnetic fields,as measured by geomagnetic satellites like MSS-1(Macao Science Satellite-1)and Swarm,are vital for understanding core dynamics and tectonic evolution.To model these internal magnetic fields accurately,data selection based on specific criteria is often employed to minimize the influence of rapidly changing current systems in the ionosphere and magnetosphere.However,the quantitative impact of various data selection criteria on internal geomagnetic field modeling is not well understood.This study aims to address this issue and provide a reference for constructing and applying geomagnetic field models.First,we collect the latest MSS-1 and Swarm satellite magnetic data and summarize widely used data selection criteria in geomagnetic field modeling.Second,we briefly describe the method to co-estimate the core,crustal,and large-scale magnetospheric fields using satellite magnetic data.Finally,we conduct a series of field modeling experiments with different data selection criteria to quantitatively estimate their influence.Our numerical experiments confirm that without selecting data from dark regions and geomagnetically quiet times,the resulting internal field differences at the Earth’s surface can range from tens to hundreds of nanotesla(nT).Additionally,we find that the uncertainties introduced into field models by different data selection criteria are significantly larger than the measurement accuracy of modern geomagnetic satellites.These uncertainties should be considered when utilizing constructed magnetic field models for scientific research and applications.展开更多
In our recently published paper,[1]a typesetting error occurred during the production process.Figure 1 in the published version was incomplete.The processing of molecular dynamics(MD)simulation data into graph-structu...In our recently published paper,[1]a typesetting error occurred during the production process.Figure 1 in the published version was incomplete.The processing of molecular dynamics(MD)simulation data into graph-structured representations in the left bottom panel of thefigure was inadvertently omitted.展开更多
Data-driven techniques are reshaping blast furnace iron-making process(BFIP)modeling,but their“black-box”nature often obscures interpretability and accuracy.To overcome these limitations,our mechanism and data co-dr...Data-driven techniques are reshaping blast furnace iron-making process(BFIP)modeling,but their“black-box”nature often obscures interpretability and accuracy.To overcome these limitations,our mechanism and data co-driven strategy(MDCDS)enhances model transparency and molten iron quality(MIQ)prediction.By zoning the furnace and applying mechanism-based features for material and thermal trends,coupled with a novel stationary broad feature learning system(StaBFLS),interference caused by nonstationary process characteristics are mitigated and the intrinsic information embedded in BFIP is mined.Subsequently,by integrating stationary feature representation with mechanism features,our temporal matching broad learning system(TMBLS)aligns process and quality variables using MIQ as the target.This integration allows us to establish process monitoring statistics using both mechanism and data-driven features,as well as detect modeling deviations.Validated against real-world BFIP data,our MDCDS model demonstrates consistent process alignment,robust feature extraction,and improved MIQ modeling—Yielding better fault detection.Additionally,we offer detailed insights into the validation process,including parameter baselining and optimization.展开更多
Hydrocarbon production from shale has attracted much attention in the recent years. When applied to this prolific and hydrocarbon rich resource plays, our understanding of the complexities of the flow mechanism（sorpt...Hydrocarbon production from shale has attracted much attention in the recent years. When applied to this prolific and hydrocarbon rich resource plays, our understanding of the complexities of the flow mechanism（sorption process and flow behavior in complex fracture systems- induced or natural） leaves much to be desired. In this paper, we present and discuss a novel approach to modeling, history matching of hydrocarbon production from a Marcellus shale asset in southwestern Pennsylvania using advanced data mining, pattern recognition and machine learning technologies. In this new approach instead of imposing our understanding of the flow mechanism, the impact of multi-stage hydraulic fractures, and the production process on the reservoir model, we allow the production history, well log, completion and hydraulic fracturing data to guide our model and determine its behavior. The uniqueness of this technology is that it incorporates the so-called ＂hard data＂ directly into the reservoir model, so that the model can be used to optimize the hydraulic fracture process. The ＂hard data＂ refers to field measurements during the hydraulic fracturing process such as fluid and proppant type and amount, injection pressure and rate as well as proppant concentration. This novel approach contrasts with the current industry focus on the use of ＂soft data＂（non-measured, interpretive data such as frac length, width,height and conductivity） in the reservoir models. The study focuses on a Marcellus shale asset that includes 135 wells with multiple pads, different landing targets, well length and reservoir properties. The full field history matching process was successfully completed using this data driven approach thus capturing the production behavior with acceptable accuracy for individual wells and for the entire asset.展开更多
Dear Editor,Aiming at the consensus tracking problem of a class of unknown heterogeneous nonlinear multiagent systems(MASs)with input constraints,a novel data-driven iterative learning consensus control(ILCC)protocol ...Dear Editor,Aiming at the consensus tracking problem of a class of unknown heterogeneous nonlinear multiagent systems(MASs)with input constraints,a novel data-driven iterative learning consensus control(ILCC)protocol based on zeroing neural networks(ZNNs)is proposed.First,a dynamic linearization data model(DLDM)is acquired via dynamic linearization technology(DLT).展开更多
With the widespread application of Internet of Things(IoT)technology,the processing of massive realtime streaming data poses significant challenges to the computational and data-processing capabilities of systems.Alth...With the widespread application of Internet of Things(IoT)technology,the processing of massive realtime streaming data poses significant challenges to the computational and data-processing capabilities of systems.Although distributed streaming data processing frameworks such asApache Flink andApache Spark Streaming provide solutions,meeting stringent response time requirements while ensuring high throughput and resource utilization remains an urgent problem.To address this,the study proposes a formal modeling approach based on Performance Evaluation Process Algebra(PEPA),which abstracts the core components and interactions of cloud-based distributed streaming data processing systems.Additionally,a generic service flow generation algorithmis introduced,enabling the automatic extraction of service flows fromthe PEPAmodel and the computation of key performance metrics,including response time,throughput,and resource utilization.The novelty of this work lies in the integration of PEPA-based formal modeling with the service flow generation algorithm,bridging the gap between formal modeling and practical performance evaluation for IoT systems.Simulation experiments demonstrate that optimizing the execution efficiency of components can significantly improve system performance.For instance,increasing the task execution rate from 10 to 100 improves system performance by 9.53%,while further increasing it to 200 results in a 21.58%improvement.However,diminishing returns are observed when the execution rate reaches 500,with only a 0.42%gain.Similarly,increasing the number of TaskManagers from 10 to 20 improves response time by 18.49%,but the improvement slows to 6.06% when increasing from 20 to 50,highlighting the importance of co-optimizing component efficiency and resource management to achieve substantial performance gains.This study provides a systematic framework for analyzing and optimizing the performance of IoT systems for large-scale real-time streaming data processing.The proposed approach not only identifies performance bottlenecks but also offers insights into improving system efficiency under different configurations and workloads.展开更多
The distillation process is an important chemical process,and the application of data-driven modelling approach has the potential to reduce model complexity compared to mechanistic modelling,thus improving the efficie...The distillation process is an important chemical process,and the application of data-driven modelling approach has the potential to reduce model complexity compared to mechanistic modelling,thus improving the efficiency of process optimization or monitoring studies.However,the distillation process is highly nonlinear and has multiple uncertainty perturbation intervals,which brings challenges to accurate data-driven modelling of distillation processes.This paper proposes a systematic data-driven modelling framework to solve these problems.Firstly,data segment variance was introduced into the K-means algorithm to form K-means data interval(KMDI)clustering in order to cluster the data into perturbed and steady state intervals for steady-state data extraction.Secondly,maximal information coefficient(MIC)was employed to calculate the nonlinear correlation between variables for removing redundant features.Finally,extreme gradient boosting(XGBoost)was integrated as the basic learner into adaptive boosting(AdaBoost)with the error threshold(ET)set to improve weights update strategy to construct the new integrated learning algorithm,XGBoost-AdaBoost-ET.The superiority of the proposed framework is verified by applying this data-driven modelling framework to a real industrial process of propylene distillation.展开更多
The application scope and future development directions of machine learning models(supervised learning, transfer learning, and unsupervised learning) that have driven energy material design are discussed.
The curse of dimensionality refers to the problem o increased sparsity and computational complexity when dealing with high-dimensional data.In recent years,the types and vari ables of industrial data have increased si...The curse of dimensionality refers to the problem o increased sparsity and computational complexity when dealing with high-dimensional data.In recent years,the types and vari ables of industrial data have increased significantly,making data driven models more challenging to develop.To address this prob lem,data augmentation technology has been introduced as an effective tool to solve the sparsity problem of high-dimensiona industrial data.This paper systematically explores and discusses the necessity,feasibility,and effectiveness of augmented indus trial data-driven modeling in the context of the curse of dimen sionality and virtual big data.Then,the process of data augmen tation modeling is analyzed,and the concept of data boosting augmentation is proposed.The data boosting augmentation involves designing the reliability weight and actual-virtual weigh functions,and developing a double weighted partial least squares model to optimize the three stages of data generation,data fusion and modeling.This approach significantly improves the inter pretability,effectiveness,and practicality of data augmentation in the industrial modeling.Finally,the proposed method is verified using practical examples of fault diagnosis systems and virtua measurement systems in the industry.The results demonstrate the effectiveness of the proposed approach in improving the accu racy and robustness of data-driven models,making them more suitable for real-world industrial applications.展开更多
Aerodynamic surrogate modeling mostly relies only on integrated loads data obtained from simulation or experiment,while neglecting and wasting the valuable distributed physical information on the surface.To make full ...Aerodynamic surrogate modeling mostly relies only on integrated loads data obtained from simulation or experiment,while neglecting and wasting the valuable distributed physical information on the surface.To make full use of both integrated and distributed loads,a modeling paradigm,called the heterogeneous data-driven aerodynamic modeling,is presented.The essential concept is to incorporate the physical information of distributed loads as additional constraints within the end-to-end aerodynamic modeling.Towards heterogenous data,a novel and easily applicable physical feature embedding modeling framework is designed.This framework extracts lowdimensional physical features from pressure distribution and then effectively enhances the modeling of the integrated loads via feature embedding.The proposed framework can be coupled with multiple feature extraction methods,and the well-performed generalization capabilities over different airfoils are verified through a transonic case.Compared with traditional direct modeling,the proposed framework can reduce testing errors by almost 50%.Given the same prediction accuracy,it can save more than half of the training samples.Furthermore,the visualization analysis has revealed a significant correlation between the discovered low-dimensional physical features and the heterogeneous aerodynamic loads,which shows the interpretability and credibility of the superior performance offered by the proposed deep learning framework.展开更多
A control valve is one of the most widely used machines in hydraulic systems.However,it often works in harsh environments and failure occurs from time to time.An intelligent and robust control valve fault diagnosis is...A control valve is one of the most widely used machines in hydraulic systems.However,it often works in harsh environments and failure occurs from time to time.An intelligent and robust control valve fault diagnosis is therefore important for operation of the system.In this study,a fault diagnosis based on the mathematical model(MM)imputation and the modified deep residual shrinkage network(MDRSN)is proposed to solve the problem that data-driven models for control valves are susceptible to changing operating conditions and missing data.The multiple fault time-series samples of the control valve at different openings are collected for fault diagnosis to verify the effectiveness of the proposed method.The effects of the proposed method in missing data imputation and fault diagnosis are analyzed.Compared with random and k-nearest neighbor(KNN)imputation,the accuracies of MM-based imputation are improved by 17.87%and 21.18%,in the circumstances of a20.00%data missing rate at valve opening from 10%to 28%.Furthermore,the results show that the proposed MDRSN can maintain high fault diagnosis accuracy with missing data.展开更多
In this paper,a data-driven method to model the three-dimensional engineering structure under the cyclic load with the one-dimensional stress-strain data is proposed.In this method,one-dimensional stress-strain data o...In this paper,a data-driven method to model the three-dimensional engineering structure under the cyclic load with the one-dimensional stress-strain data is proposed.In this method,one-dimensional stress-strain data obtained under uniaxial load and different loading history is learned offline by gate recurrent unit(GRU)network.The learned constitutive model is embedded into the general finite element framework through data expansion from one dimension to three dimensions,which can perform stress updates under the three-dimensional setting.The proposed method is then adopted to drive numerical solutions of boundary value problems for engineering structures.Compared with direct numerical simulations using the J2 plasticity model,the stress-strain response of beam structure with elastoplastic materials under forward loading,reverse loading and cyclic loading were predicted accurately.Loading path dependent response of structure was captured and the effectiveness of the proposed method is verified.The shortcomings of the proposed method are also discussed.展开更多
Brain tissue is one of the softest parts of the human body,composed of white matter and grey matter.The mechanical behavior of the brain tissue plays an essential role in regulating brain morphology and brain function...Brain tissue is one of the softest parts of the human body,composed of white matter and grey matter.The mechanical behavior of the brain tissue plays an essential role in regulating brain morphology and brain function.Besides,traumatic brain injury(TBI)and various brain diseases are also greatly influenced by the brain's mechanical properties.Whether white matter or grey matter,brain tissue contains multiscale structures composed of neurons,glial cells,fibers,blood vessels,etc.,each with different mechanical properties.As such,brain tissue exhibits complex mechanical behavior,usually with strong nonlinearity,heterogeneity,and directional dependence.Building a constitutive law for multiscale brain tissue using traditional function-based approaches can be very challenging.Instead,this paper proposes a data-driven approach to establish the desired mechanical model of brain tissue.We focus on blood vessels with internal pressure embedded in a white or grey matter matrix material to demonstrate our approach.The matrix is described by an isotropic or anisotropic nonlinear elastic model.A representative unit cell(RUC)with blood vessels is built,which is used to generate the stress-strain data under different internal blood pressure and various proportional displacement loading paths.The generated stress-strain data is then used to train a mechanical law using artificial neural networks to predict the macroscopic mechanical response of brain tissue under different internal pressures.Finally,the trained material model is implemented into finite element software to predict the mechanical behavior of a whole brain under intracranial pressure and distributed body forces.Compared with a direct numerical simulation that employs a reference material model,our proposed approach greatly reduces the computational cost and improves modeling efficiency.The predictions made by our trained model demonstrate sufficient accuracy.Specifically,we find that the level of internal blood pressure can greatly influence stress distribution and determine the possible related damage behaviors.展开更多
This study presents a machine learning-based method for predicting fragment velocity distribution in warhead fragmentation under explosive loading condition.The fragment resultant velocities are correlated with key de...This study presents a machine learning-based method for predicting fragment velocity distribution in warhead fragmentation under explosive loading condition.The fragment resultant velocities are correlated with key design parameters including casing dimensions and detonation positions.The paper details the finite element analysis for fragmentation,the characterizations of the dynamic hardening and fracture models,the generation of comprehensive datasets,and the training of the ANN model.The results show the influence of casing dimensions on fragment velocity distributions,with the tendencies indicating increased resultant velocity with reduced thickness,increased length and diameter.The model's predictive capability is demonstrated through the accurate predictions for both training and testing datasets,showing its potential for the real-time prediction of fragmentation performance.展开更多
Aerodynamic modeling and parameter estimation from quick accesses recorder （QAR） data is an important technical way to analyze the effects of highland weather conditions upon aerodynamic characteristics of airplane....Aerodynamic modeling and parameter estimation from quick accesses recorder （QAR） data is an important technical way to analyze the effects of highland weather conditions upon aerodynamic characteristics of airplane. It is also an essential content of flight accident analysis. The related techniques are developed in the present paper, including the geometric method for angle of attack and sideslip angle estimation, the extended Kalman filter associated with modified Bryson-Frazier smoother （EKF-MBF） method for aerodynamic coefficient identification, the radial basis function （RBF） neural network method for aerodynamic mod- eling, and the Delta method for stability/control derivative estimation. As an application example, the QAR data of a civil air- plane approaching a high-altitude airport are processed and the aerodynamic coefficient and derivative estimates are obtained. The estimation results are reasonable, which shows that the developed techniques are feasible. The causes for the distribution of aerodynamic derivative estimates are analyzed. Accordingly, several measures to improve estimation accuracy are put forward.展开更多
Target detection is always an important application in hyperspectral image processing field. In this paper, a spectral-spatial target detection algorithm for hyperspectral data is proposed.The spatial feature and spec...Target detection is always an important application in hyperspectral image processing field. In this paper, a spectral-spatial target detection algorithm for hyperspectral data is proposed.The spatial feature and spectral feature were unified based on the data filed theory and extracted by weighted manifold embedding. The novelties of the proposed method lie in two aspects. One is the way in which the spatial features and spectral features were fused as a new feature based on the data field theory, and the other is that local information was introduced to describe the decision boundary and explore the discriminative features for target detection. The extracted features based on data field modeling and manifold embedding techniques were considered for a target detection task.Three standard hyperspectral datasets were considered in the analysis. The effectiveness of the proposed target detection algorithm based on data field theory was proved by the higher detection rates with lower False Alarm Rates（FARs） with respect to those achieved by conventional hyperspectral target detectors.展开更多
文摘Correction to:J.Iron Steel Res.Int.https://doi.org/10.1007/s42243-025-01545-x The publication of this article unfortunately contained mistakes.Equation(14)was not correct.The corrected equation is given below.
文摘High-throughput transcriptomics has evolved from bulk RNA-seq to single-cell and spatial profiling,yet its clinical translation still depends on effective integration across diverse omics and data modalities.Emerging foundation models and multimodal learning frameworks are enabling scalable and transferable representations of cellular states,while advances in interpretability and real-world data integration are bridging the gap between discovery and clinical application.This paper outlines a concise roadmap for AI-driven,transcriptome-centered multi-omics integration in precision medicine(Figure 1).
基金supported by National Key R&D Program of China(No.2021YFF0501301)the National Natural Science Foundation of China(No.42172231)。
文摘0 INTRODUCTION Earth science is a natural science concerned with the composition,dynamics,spatiotemporal evolution,and formation mechanisms of Earth materials(Chen and Yang,2023).Traditional Earth science research has largely been discipline-based,relying on field investigations,data collection,experimental analyses,and data interpretation to study individual components of the Earth system.
基金supported by the National Social Science Foundation of China under Grant No.23&ZD126National Science Foundation of China under Grant No.12471256+1 种基金Natural Science Foundation of Shanxi Province under Grant No.202203021221219Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi under Grant No.2023L164。
文摘The authors consider the issue of hypothesis testing in varying-coefficient regression models with high-dimensional data.Utilizing kernel smoothing techniques,the authors propose a locally concerned U-statistic method to assess the overall significance of the coefficients.The authors establish that the proposed test is asymptotically normal under both the null hypothesis and local alternatives.Based on the locally concerned U-statistic,the authors further develop a globally concerned U-statistic to test whether the coefficient function is zero.A stochastic perturbation method is employed to approximate the distribution of the globally concerned test statistic.Monte Carlo simulations demonstrate the validity of the proposed test in finite samples.
基金supported by the National Natural Science Foundation of China(42250101)the Macao Foundation。
文摘Earth’s internal core and crustal magnetic fields,as measured by geomagnetic satellites like MSS-1(Macao Science Satellite-1)and Swarm,are vital for understanding core dynamics and tectonic evolution.To model these internal magnetic fields accurately,data selection based on specific criteria is often employed to minimize the influence of rapidly changing current systems in the ionosphere and magnetosphere.However,the quantitative impact of various data selection criteria on internal geomagnetic field modeling is not well understood.This study aims to address this issue and provide a reference for constructing and applying geomagnetic field models.First,we collect the latest MSS-1 and Swarm satellite magnetic data and summarize widely used data selection criteria in geomagnetic field modeling.Second,we briefly describe the method to co-estimate the core,crustal,and large-scale magnetospheric fields using satellite magnetic data.Finally,we conduct a series of field modeling experiments with different data selection criteria to quantitatively estimate their influence.Our numerical experiments confirm that without selecting data from dark regions and geomagnetically quiet times,the resulting internal field differences at the Earth’s surface can range from tens to hundreds of nanotesla(nT).Additionally,we find that the uncertainties introduced into field models by different data selection criteria are significantly larger than the measurement accuracy of modern geomagnetic satellites.These uncertainties should be considered when utilizing constructed magnetic field models for scientific research and applications.
文摘In our recently published paper,[1]a typesetting error occurred during the production process.Figure 1 in the published version was incomplete.The processing of molecular dynamics(MD)simulation data into graph-structured representations in the left bottom panel of thefigure was inadvertently omitted.
基金supported in part by the National Natural Science Foundation of China(61933015,61703371,62273030)the Central University Basic Research Fund of China(K20200002)(for NGICS Platform,Zhejiang University)the Social Development Project of Zhejiang Provincial Public Technology Research(LGF19F030004,LGG21F030015).
文摘Data-driven techniques are reshaping blast furnace iron-making process(BFIP)modeling,but their“black-box”nature often obscures interpretability and accuracy.To overcome these limitations,our mechanism and data co-driven strategy(MDCDS)enhances model transparency and molten iron quality(MIQ)prediction.By zoning the furnace and applying mechanism-based features for material and thermal trends,coupled with a novel stationary broad feature learning system(StaBFLS),interference caused by nonstationary process characteristics are mitigated and the intrinsic information embedded in BFIP is mined.Subsequently,by integrating stationary feature representation with mechanism features,our temporal matching broad learning system(TMBLS)aligns process and quality variables using MIQ as the target.This integration allows us to establish process monitoring statistics using both mechanism and data-driven features,as well as detect modeling deviations.Validated against real-world BFIP data,our MDCDS model demonstrates consistent process alignment,robust feature extraction,and improved MIQ modeling—Yielding better fault detection.Additionally,we offer detailed insights into the validation process,including parameter baselining and optimization.
基金RPSEA and U.S.Department of Energy for partially funding this study
文摘Hydrocarbon production from shale has attracted much attention in the recent years. When applied to this prolific and hydrocarbon rich resource plays, our understanding of the complexities of the flow mechanism（sorption process and flow behavior in complex fracture systems- induced or natural） leaves much to be desired. In this paper, we present and discuss a novel approach to modeling, history matching of hydrocarbon production from a Marcellus shale asset in southwestern Pennsylvania using advanced data mining, pattern recognition and machine learning technologies. In this new approach instead of imposing our understanding of the flow mechanism, the impact of multi-stage hydraulic fractures, and the production process on the reservoir model, we allow the production history, well log, completion and hydraulic fracturing data to guide our model and determine its behavior. The uniqueness of this technology is that it incorporates the so-called ＂hard data＂ directly into the reservoir model, so that the model can be used to optimize the hydraulic fracture process. The ＂hard data＂ refers to field measurements during the hydraulic fracturing process such as fluid and proppant type and amount, injection pressure and rate as well as proppant concentration. This novel approach contrasts with the current industry focus on the use of ＂soft data＂（non-measured, interpretive data such as frac length, width,height and conductivity） in the reservoir models. The study focuses on a Marcellus shale asset that includes 135 wells with multiple pads, different landing targets, well length and reservoir properties. The full field history matching process was successfully completed using this data driven approach thus capturing the production behavior with acceptable accuracy for individual wells and for the entire asset.
基金supported by the National Nature Science Foundation of China(U21A20166)the Science and Technology Development Foundation of Jilin Province(20230508095RC)+2 种基金the Major Science and Technology Projects of Jilin Province and Changchun City(20220301033GX)the Development and Reform Commission Foundation of Jilin Province(2023C034-3)the Interdisciplinary Integration and Innovation Project of JLU(JLUXKJC2020202).
文摘Dear Editor,Aiming at the consensus tracking problem of a class of unknown heterogeneous nonlinear multiagent systems(MASs)with input constraints,a novel data-driven iterative learning consensus control(ILCC)protocol based on zeroing neural networks(ZNNs)is proposed.First,a dynamic linearization data model(DLDM)is acquired via dynamic linearization technology(DLT).
基金funded by the Joint Project of Industry-University-Research of Jiangsu Province(Grant:BY20231146).
文摘With the widespread application of Internet of Things(IoT)technology,the processing of massive realtime streaming data poses significant challenges to the computational and data-processing capabilities of systems.Although distributed streaming data processing frameworks such asApache Flink andApache Spark Streaming provide solutions,meeting stringent response time requirements while ensuring high throughput and resource utilization remains an urgent problem.To address this,the study proposes a formal modeling approach based on Performance Evaluation Process Algebra(PEPA),which abstracts the core components and interactions of cloud-based distributed streaming data processing systems.Additionally,a generic service flow generation algorithmis introduced,enabling the automatic extraction of service flows fromthe PEPAmodel and the computation of key performance metrics,including response time,throughput,and resource utilization.The novelty of this work lies in the integration of PEPA-based formal modeling with the service flow generation algorithm,bridging the gap between formal modeling and practical performance evaluation for IoT systems.Simulation experiments demonstrate that optimizing the execution efficiency of components can significantly improve system performance.For instance,increasing the task execution rate from 10 to 100 improves system performance by 9.53%,while further increasing it to 200 results in a 21.58%improvement.However,diminishing returns are observed when the execution rate reaches 500,with only a 0.42%gain.Similarly,increasing the number of TaskManagers from 10 to 20 improves response time by 18.49%,but the improvement slows to 6.06% when increasing from 20 to 50,highlighting the importance of co-optimizing component efficiency and resource management to achieve substantial performance gains.This study provides a systematic framework for analyzing and optimizing the performance of IoT systems for large-scale real-time streaming data processing.The proposed approach not only identifies performance bottlenecks but also offers insights into improving system efficiency under different configurations and workloads.
基金supported by the National Key Research and Development Program of China(2023YFB3307801)the National Natural Science Foundation of China(62394343,62373155,62073142)+3 种基金Major Science and Technology Project of Xinjiang(No.2022A01006-4)the Programme of Introducing Talents of Discipline to Universities(the 111 Project)under Grant B17017the Fundamental Research Funds for the Central Universities,Science Foundation of China University of Petroleum,Beijing(No.2462024YJRC011)the Open Research Project of the State Key Laboratory of Industrial Control Technology,China(Grant No.ICT2024B70).
文摘The distillation process is an important chemical process,and the application of data-driven modelling approach has the potential to reduce model complexity compared to mechanistic modelling,thus improving the efficiency of process optimization or monitoring studies.However,the distillation process is highly nonlinear and has multiple uncertainty perturbation intervals,which brings challenges to accurate data-driven modelling of distillation processes.This paper proposes a systematic data-driven modelling framework to solve these problems.Firstly,data segment variance was introduced into the K-means algorithm to form K-means data interval(KMDI)clustering in order to cluster the data into perturbed and steady state intervals for steady-state data extraction.Secondly,maximal information coefficient(MIC)was employed to calculate the nonlinear correlation between variables for removing redundant features.Finally,extreme gradient boosting(XGBoost)was integrated as the basic learner into adaptive boosting(AdaBoost)with the error threshold(ET)set to improve weights update strategy to construct the new integrated learning algorithm,XGBoost-AdaBoost-ET.The superiority of the proposed framework is verified by applying this data-driven modelling framework to a real industrial process of propylene distillation.
基金supported by the National Key R&D Program of China(Grant No.2021YFC2100100)the National Natural Science Foundation of China(Grant No.21901157)+1 种基金the Shanghai Science and Technology Project of China(Grant No.21JC1403400)the SJTU Global Strategic Partnership Fund(Grant No.2020 SJTUHUJI)。
文摘The application scope and future development directions of machine learning models(supervised learning, transfer learning, and unsupervised learning) that have driven energy material design are discussed.
基金supported in part by the National Natural Science Foundation of China(NSFC)(92167106,61833014)Key Research and Development Program of Zhejiang Province(2022C01206)。
文摘The curse of dimensionality refers to the problem o increased sparsity and computational complexity when dealing with high-dimensional data.In recent years,the types and vari ables of industrial data have increased significantly,making data driven models more challenging to develop.To address this prob lem,data augmentation technology has been introduced as an effective tool to solve the sparsity problem of high-dimensiona industrial data.This paper systematically explores and discusses the necessity,feasibility,and effectiveness of augmented indus trial data-driven modeling in the context of the curse of dimen sionality and virtual big data.Then,the process of data augmen tation modeling is analyzed,and the concept of data boosting augmentation is proposed.The data boosting augmentation involves designing the reliability weight and actual-virtual weigh functions,and developing a double weighted partial least squares model to optimize the three stages of data generation,data fusion and modeling.This approach significantly improves the inter pretability,effectiveness,and practicality of data augmentation in the industrial modeling.Finally,the proposed method is verified using practical examples of fault diagnosis systems and virtua measurement systems in the industry.The results demonstrate the effectiveness of the proposed approach in improving the accu racy and robustness of data-driven models,making them more suitable for real-world industrial applications.
基金supported by the National Natural Science Foundation of China(Nos.92152301,12072282)。
文摘Aerodynamic surrogate modeling mostly relies only on integrated loads data obtained from simulation or experiment,while neglecting and wasting the valuable distributed physical information on the surface.To make full use of both integrated and distributed loads,a modeling paradigm,called the heterogeneous data-driven aerodynamic modeling,is presented.The essential concept is to incorporate the physical information of distributed loads as additional constraints within the end-to-end aerodynamic modeling.Towards heterogenous data,a novel and easily applicable physical feature embedding modeling framework is designed.This framework extracts lowdimensional physical features from pressure distribution and then effectively enhances the modeling of the integrated loads via feature embedding.The proposed framework can be coupled with multiple feature extraction methods,and the well-performed generalization capabilities over different airfoils are verified through a transonic case.Compared with traditional direct modeling,the proposed framework can reduce testing errors by almost 50%.Given the same prediction accuracy,it can save more than half of the training samples.Furthermore,the visualization analysis has revealed a significant correlation between the discovered low-dimensional physical features and the heterogeneous aerodynamic loads,which shows the interpretability and credibility of the superior performance offered by the proposed deep learning framework.
基金supported by the National Natural Science Foundation of China(No.51875113)the Natural Science Joint Guidance Foundation of the Heilongjiang Province of China(No.LH2019E027)the PhD Student Research and Innovation Fund of the Fundamental Research Funds for the Central Universities(No.XK2070021009),China。
文摘A control valve is one of the most widely used machines in hydraulic systems.However,it often works in harsh environments and failure occurs from time to time.An intelligent and robust control valve fault diagnosis is therefore important for operation of the system.In this study,a fault diagnosis based on the mathematical model(MM)imputation and the modified deep residual shrinkage network(MDRSN)is proposed to solve the problem that data-driven models for control valves are susceptible to changing operating conditions and missing data.The multiple fault time-series samples of the control valve at different openings are collected for fault diagnosis to verify the effectiveness of the proposed method.The effects of the proposed method in missing data imputation and fault diagnosis are analyzed.Compared with random and k-nearest neighbor(KNN)imputation,the accuracies of MM-based imputation are improved by 17.87%and 21.18%,in the circumstances of a20.00%data missing rate at valve opening from 10%to 28%.Furthermore,the results show that the proposed MDRSN can maintain high fault diagnosis accuracy with missing data.
文摘In this paper,a data-driven method to model the three-dimensional engineering structure under the cyclic load with the one-dimensional stress-strain data is proposed.In this method,one-dimensional stress-strain data obtained under uniaxial load and different loading history is learned offline by gate recurrent unit(GRU)network.The learned constitutive model is embedded into the general finite element framework through data expansion from one dimension to three dimensions,which can perform stress updates under the three-dimensional setting.The proposed method is then adopted to drive numerical solutions of boundary value problems for engineering structures.Compared with direct numerical simulations using the J2 plasticity model,the stress-strain response of beam structure with elastoplastic materials under forward loading,reverse loading and cyclic loading were predicted accurately.Loading path dependent response of structure was captured and the effectiveness of the proposed method is verified.The shortcomings of the proposed method are also discussed.
文摘Brain tissue is one of the softest parts of the human body,composed of white matter and grey matter.The mechanical behavior of the brain tissue plays an essential role in regulating brain morphology and brain function.Besides,traumatic brain injury(TBI)and various brain diseases are also greatly influenced by the brain's mechanical properties.Whether white matter or grey matter,brain tissue contains multiscale structures composed of neurons,glial cells,fibers,blood vessels,etc.,each with different mechanical properties.As such,brain tissue exhibits complex mechanical behavior,usually with strong nonlinearity,heterogeneity,and directional dependence.Building a constitutive law for multiscale brain tissue using traditional function-based approaches can be very challenging.Instead,this paper proposes a data-driven approach to establish the desired mechanical model of brain tissue.We focus on blood vessels with internal pressure embedded in a white or grey matter matrix material to demonstrate our approach.The matrix is described by an isotropic or anisotropic nonlinear elastic model.A representative unit cell(RUC)with blood vessels is built,which is used to generate the stress-strain data under different internal blood pressure and various proportional displacement loading paths.The generated stress-strain data is then used to train a mechanical law using artificial neural networks to predict the macroscopic mechanical response of brain tissue under different internal pressures.Finally,the trained material model is implemented into finite element software to predict the mechanical behavior of a whole brain under intracranial pressure and distributed body forces.Compared with a direct numerical simulation that employs a reference material model,our proposed approach greatly reduces the computational cost and improves modeling efficiency.The predictions made by our trained model demonstrate sufficient accuracy.Specifically,we find that the level of internal blood pressure can greatly influence stress distribution and determine the possible related damage behaviors.
基金supported by Poongsan-KAIST Future Research Center Projectthe fund support provided by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(Grant No.2023R1A2C2005661)。
文摘This study presents a machine learning-based method for predicting fragment velocity distribution in warhead fragmentation under explosive loading condition.The fragment resultant velocities are correlated with key design parameters including casing dimensions and detonation positions.The paper details the finite element analysis for fragmentation,the characterizations of the dynamic hardening and fracture models,the generation of comprehensive datasets,and the training of the ANN model.The results show the influence of casing dimensions on fragment velocity distributions,with the tendencies indicating increased resultant velocity with reduced thickness,increased length and diameter.The model's predictive capability is demonstrated through the accurate predictions for both training and testing datasets,showing its potential for the real-time prediction of fragmentation performance.
基金National Natural Science Foundation of China(60832012)
文摘Aerodynamic modeling and parameter estimation from quick accesses recorder （QAR） data is an important technical way to analyze the effects of highland weather conditions upon aerodynamic characteristics of airplane. It is also an essential content of flight accident analysis. The related techniques are developed in the present paper, including the geometric method for angle of attack and sideslip angle estimation, the extended Kalman filter associated with modified Bryson-Frazier smoother （EKF-MBF） method for aerodynamic coefficient identification, the radial basis function （RBF） neural network method for aerodynamic mod- eling, and the Delta method for stability/control derivative estimation. As an application example, the QAR data of a civil air- plane approaching a high-altitude airport are processed and the aerodynamic coefficient and derivative estimates are obtained. The estimation results are reasonable, which shows that the developed techniques are feasible. The causes for the distribution of aerodynamic derivative estimates are analyzed. Accordingly, several measures to improve estimation accuracy are put forward.
文摘Target detection is always an important application in hyperspectral image processing field. In this paper, a spectral-spatial target detection algorithm for hyperspectral data is proposed.The spatial feature and spectral feature were unified based on the data filed theory and extracted by weighted manifold embedding. The novelties of the proposed method lie in two aspects. One is the way in which the spatial features and spectral features were fused as a new feature based on the data field theory, and the other is that local information was introduced to describe the decision boundary and explore the discriminative features for target detection. The extracted features based on data field modeling and manifold embedding techniques were considered for a target detection task.Three standard hyperspectral datasets were considered in the analysis. The effectiveness of the proposed target detection algorithm based on data field theory was proved by the higher detection rates with lower False Alarm Rates（FARs） with respect to those achieved by conventional hyperspectral target detectors.
