The Chang＇e-3 Visible and Near-infrared Imaging Spectrometer （VNIS） is one of the four payloads on the Yutu rover. After traversing the landing site during the first two lunar days, four different areas are detecte...The Chang＇e-3 Visible and Near-infrared Imaging Spectrometer （VNIS） is one of the four payloads on the Yutu rover. After traversing the landing site during the first two lunar days, four different areas are detected, and Level 2A and 2B ra- diance data have been released to the scientific community. The released data have been processed by dark current subtraction, correction for the effect of temperature, radiometric calibration and geometric calibration. We emphasize approaches for re- flectance analysis and mineral identification for in-situ analysis with VNIS. Then the preliminary spectral and mineralogical results from the landing site are derived. After comparing spectral data from VNIS with data collected by the Ma instrument and samples of mare that were returned from the Apollo program, all the reflectance data have been found to have similar absorption features near 1000 nm except lunar sample 71061. In addition, there is also a weak absorption feature between 1750-2400nm on VNIS, but the slopes of VNIS and Ma reflectance at longer wavelengths are lower than data taken from samples of lunar mare. Spectral parameters such as Band Centers and Integrated Band Depth Ratios are used to analyze mineralogical features. The results show that detection points E and N205 are mixtures of high-Ca pyroxene and olivine, and the composition of olivineat point N205 is higher than that at point E, but the compositions of detection points S3 and N203 are mainly olivine-rich. Since there are no obvious absorption features near 1250 nm, plagioclase is not directly identified at the landing site.展开更多
An idea is presented about the development of a data processing and analysis system for ICF experiments, which is based on an object oriented framework. The design and preliminary implementation of the data processing...An idea is presented about the development of a data processing and analysis system for ICF experiments, which is based on an object oriented framework. The design and preliminary implementation of the data processing and analysis framework based on the ROOT system have been completed. Software for unfolding soft X-ray spectra has been developed to test the functions of this framework.展开更多
Accuracy of coeffcient A_(isp) is related to the reference phase chosen during analysis. The cri- terion of choosing reference phase which may minimize the error of A_(isp) was deduced. The optimum results could be ob...Accuracy of coeffcient A_(isp) is related to the reference phase chosen during analysis. The cri- terion of choosing reference phase which may minimize the error of A_(isp) was deduced. The optimum results could be obtained by using the method of least squares if the number of sam- pies for analysis is more than the phase in samples. The procedure presented here is satisfacto- ryfor ordinary phase analysis.展开更多
In order to study contemporary crustal movement of Antarctic,China has not only constructed the deformation monitoring network in West Antarctic Fildes strait region,but also monitored the network by using DI-20 Geodi...In order to study contemporary crustal movement of Antarctic,China has not only constructed the deformation monitoring network in West Antarctic Fildes strait region,but also monitored the network by using DI-20 Geodimeter and GPS instruments,and participated the Antarctic GPS Campaign Observation organized by SCAR as well.During mathematics processing of crustal horizontal deformation observations,a method to bring deformation parameters into the error equations of observations is discussed in this paper.Several classical deformation models,such as rigid body displacement and strain,are introduced in detail.By analyzing the reference datum of statistical geodetic network,a conclusion is drawn that it is unfit to use rank-defected reference datum for the crustal deformation analysis,and another method is developed to set up different additional weight matrix for every different kind of parameter,the classical adjustment and rank-defected adjustment are well unified.Two methods of considering or non-considering the relation between point parameters and deformation parameters are compared,and the former is more appropriate than the latter.A series of programs are developed to implementing the method mentioned above and the analysis of West Antarctic Fileds deformation monitoring network.It is also involved GPS data processing and analysis of deformation results in the paper.The research results indicate that it seems exacting displacement in Fildes rift region,but the displacement is not large,just a little rift shear movement.展开更多
The microwave radiometer （MRM） onboard the Chang＇ E-1 （CE-I） lu- nar orbiter is a 4-frequency microwave radiometer, and it is mainly used to obtain the brightness temperature （TB） of the lunar surface, from whi...The microwave radiometer （MRM） onboard the Chang＇ E-1 （CE-I） lu- nar orbiter is a 4-frequency microwave radiometer, and it is mainly used to obtain the brightness temperature （TB） of the lunar surface, from which the thickness, temperature, dielectric constant and other related properties of the lunar regolith can be derived. The working mode of the CE-1 MRM, the ground calibration （including the official calibration coefficients）, as well as the acquisition and processing of the raw data are introduced. Our data analysis shows that TB increases with increasing frequency, decreases towards the lunar poles and is significantly affected by solar illumination. Our analysis also reveals that the main uncertainty in TB comes from ground calibration.展开更多
With the increasing variety of application software of meteorological satellite ground system, how to provide reasonable hardware resources and improve the efficiency of software is paid more and more attention. In th...With the increasing variety of application software of meteorological satellite ground system, how to provide reasonable hardware resources and improve the efficiency of software is paid more and more attention. In this paper, a set of software classification method based on software operating characteristics is proposed. The method uses software run-time resource consumption to describe the software running characteristics. Firstly, principal component analysis (PCA) is used to reduce the dimension of software running feature data and to interpret software characteristic information. Then the modified K-means algorithm was used to classify the meteorological data processing software. Finally, it combined with the results of principal component analysis to explain the significance of various types of integrated software operating characteristics. And it is used as the basis for optimizing the allocation of software hardware resources and improving the efficiency of software operation.展开更多
The increasing demand for high-resolution solar observations has driven the development of advanced data processing and enhancement techniques for ground-based solar telescopes.This study focuses on developing a pytho...The increasing demand for high-resolution solar observations has driven the development of advanced data processing and enhancement techniques for ground-based solar telescopes.This study focuses on developing a python-based package(GT-scopy)for data processing and enhancing for giant solar telescopes,with application to the 1.6 m Goode Solar Telescope(GST)at Big Bear Solar Observatory.The objective is to develop a modern data processing software for refining existing data acquisition,processing,and enhancement methodologies to achieve atmospheric effect removal and accurate alignment at the sub-pixel level,particularly within the processing levels 1.0-1.5.In this research,we implemented an integrated and comprehensive data processing procedure that includes image de-rotation,zone-of-interest selection,coarse alignment,correction for atmospheric distortions,and fine alignment at the sub-pixel level with an advanced algorithm.The results demonstrate a significant improvement in image quality,with enhanced visibility of fine solar structures both in sunspots and quiet-Sun regions.The enhanced data processing package developed in this study significantly improves the utility of data obtained from the GST,paving the way for more precise solar research and contributing to a better understanding of solar dynamics.This package can be adapted for other ground-based solar telescopes,such as the Daniel K.Inouye Solar Telescope(DKIST),the European Solar Telescope(EST),and the 8 m Chinese Giant Solar Telescope,potentially benefiting the broader solar physics community.展开更多
With the continued development of multiple Global Navigation Satellite Systems(GNSS)and the emergence of various frequencies,UnDifferenced and UnCombined(UDUC)data processing has become an increasingly attractive opti...With the continued development of multiple Global Navigation Satellite Systems(GNSS)and the emergence of various frequencies,UnDifferenced and UnCombined(UDUC)data processing has become an increasingly attractive option.In this contribution,we provide an overview of the current status of UDUC GNSS data processing activities in China.These activities encompass the formulation of Precise Point Positioning(PPP)models and PPP-Real-Time Kinematic(PPP-RTK)models for processing single-station and multi-station GNSS data,respectively.Regarding single-station data processing,we discuss the advancements in PPP models,particularly the extension from a single system to multiple systems,and from dual frequencies to single and multiple frequencies.Additionally,we introduce the modified PPP model,which accounts for the time variation of receiver code biases,a departure from the conventional PPP model that typically assumes these biases to be time-constant.In the realm of multi-station PPP-RTK data processing,we introduce the ionosphere-weighted PPP-RTK model,which enhances the model strength by considering the spatial correlation of ionospheric delays.We also review the phase-only PPP-RTK model,designed to mitigate the impact of unmodelled code-related errors.Furthermore,we explore GLONASS PPP-RTK,achieved through the application of the integer-estimable model.For large-scale network data processing,we introduce the all-in-view PPP-RTK model,which alleviates the strict common-view requirement at all receivers.Moreover,we present the decentralized PPP-RTK data processing strategy,designed to improve computational efficiency.Overall,this work highlights the various advancements in UDUC GNSS data processing,providing insights into the state-of-the-art techniques employed in China to achieve precise GNSS applications.展开更多
The High Precision Magnetometer(HPM) on board the China Seismo-Electromagnetic Satellite(CSES) allows highly accurate measurement of the geomagnetic field; it includes FGM(Fluxgate Magnetometer) and CDSM(Coupled Dark ...The High Precision Magnetometer(HPM) on board the China Seismo-Electromagnetic Satellite(CSES) allows highly accurate measurement of the geomagnetic field; it includes FGM(Fluxgate Magnetometer) and CDSM(Coupled Dark State Magnetometer)probes. This article introduces the main processing method, algorithm, and processing procedure of the HPM data. First, the FGM and CDSM probes are calibrated according to ground sensor data. Then the FGM linear parameters can be corrected in orbit, by applying the absolute vector magnetic field correction algorithm from CDSM data. At the same time, the magnetic interference of the satellite is eliminated according to ground-satellite magnetic test results. Finally, according to the characteristics of the magnetic field direction in the low latitude region, the transformation matrix between FGM probe and star sensor is calibrated in orbit to determine the correct direction of the magnetic field. Comparing the magnetic field data of CSES and SWARM satellites in five continuous geomagnetic quiet days, the difference in measurements of the vector magnetic field is about 10 nT, which is within the uncertainty interval of geomagnetic disturbance.展开更多
In the course of network supported collaborative design,the data processing plays a very vital role.Much effort has been spent in this area,and many kinds of approaches have been proposed.Based on the correlative mate...In the course of network supported collaborative design,the data processing plays a very vital role.Much effort has been spent in this area,and many kinds of approaches have been proposed.Based on the correlative materials,this paper presents extensible markup language(XML)based strategy for several important problems of data processing in network supported collaborative design,such as the representation of standard for the exchange of product model data(STEP)with XML in the product information expression and the management of XML documents using relational database.The paper gives a detailed exposition on how to clarify the mapping between XML structure and the relationship database structure and how XML-QL queries can be translated into structured query language(SQL)queries.Finally,the structure of data processing system based on XML is presented.展开更多
With the advent of the big data era,real-time data analysis and decision-support systems have been recognized as essential tools for enhancing enterprise competitiveness and optimizing the decision-making process.This...With the advent of the big data era,real-time data analysis and decision-support systems have been recognized as essential tools for enhancing enterprise competitiveness and optimizing the decision-making process.This study aims to explore the development strategies of real-time data analysis and decision-support systems,and analyze their application status and future development trends in various industries.The article first reviews the basic concepts and importance of real-time data analysis and decision-support systems,and then discusses in detail the key technical aspects such as system architecture,data collection and processing,analysis methods,and visualization techniques.展开更多
This paper analyzes the advantages of legal digital currencies and explores their impact on bank big data practices.By combining bank big data collection and processing,it clarifies that legal digital currencies can e...This paper analyzes the advantages of legal digital currencies and explores their impact on bank big data practices.By combining bank big data collection and processing,it clarifies that legal digital currencies can enhance the efficiency of bank data processing,enrich data types,and strengthen data analysis and application capabilities.In response to future development needs,it is necessary to strengthen data collection management,enhance data processing capabilities,innovate big data application models,and provide references for bank big data practices,promoting the transformation and upgrading of the banking industry in the context of legal digital currencies.展开更多
The analysis of ancient genomics provides opportunities to explore human population history across both temporal and geographic dimensions(Haak et al.,2015;Wang et al.,2021,2024)to enhance the accessibility and utilit...The analysis of ancient genomics provides opportunities to explore human population history across both temporal and geographic dimensions(Haak et al.,2015;Wang et al.,2021,2024)to enhance the accessibility and utility of these ancient genomic datasets,a range of databases and advanced statistical models have been developed,including the Allen Ancient DNA Resource(AADR)(Mallick et al.,2024)and AdmixTools(Patterson et al.,2012).While upstream processes such as sequencing and raw data processing have been streamlined by resources like the AADR,the downstream analysis of these datasets-encompassing population genetics inference and spatiotemporal interpretation-remains a significant challenge.The AADR provides a unified collection of published ancient DNA(aDNA)data,yet its file-based format and reliance on command-line tools,such as those in Admix-Tools(Patterson et al.,2012),require advanced computational expertise for effective exploration and analysis.These requirements can present significant challenges forresearchers lackingadvanced computational expertise,limiting the accessibility and broader application of these valuable genomic resources.展开更多
In order to research contemporary crustal movement of Antarctica, China has constructed the deformation monitoring network in the Fildes Strait region,West Antarctica, monitored the network by using DI 20 geodimeter...In order to research contemporary crustal movement of Antarctica, China has constructed the deformation monitoring network in the Fildes Strait region,West Antarctica, monitored the network by using DI 20 geodimeter and GPS instruments, and participated the Antarctic GPS Campaign Observation organized by SCAR as well. During mathematics processing of crustal horizontal deformation observations,a method to bring deformation parameters into the error equations of observations is discussed in this paper. Several classical deformation models,such as rigid body displacement and strain,are introduced. By analyzing the reference datum of static and dynamic geodetic network,the method is developed to set up different additional weight matrix for every different kind of parameter. A series of programs are developed to implementing the method mentioned above and the analysis of West Antarctic Fildes Strait deformation monitoring network. Discussion is also made of GPS monitoring data by using the principle of monitoring network strain analysis in the paper. The research results indicate that the displacement did occur in Fildes rift region,but the displacement was not large,just a slight rift shear movement.展开更多
Gravitational wave detection is one of the most cutting-edge research areas in modern physics, with its success relying on advanced data analysis and signal processing techniques. This study provides a comprehensive r...Gravitational wave detection is one of the most cutting-edge research areas in modern physics, with its success relying on advanced data analysis and signal processing techniques. This study provides a comprehensive review of data analysis methods and signal processing techniques in gravitational wave detection. The research begins by introducing the characteristics of gravitational wave signals and the challenges faced in their detection, such as extremely low signal-to-noise ratios and complex noise backgrounds. It then systematically analyzes the application of time-frequency analysis methods in extracting transient gravitational wave signals, including wavelet transforms and Hilbert-Huang transforms. The study focuses on discussing the crucial role of matched filtering techniques in improving signal detection sensitivity and explores strategies for template bank optimization. Additionally, the research evaluates the potential of machine learning algorithms, especially deep learning networks, in rapidly identifying and classifying gravitational wave events. The study also analyzes the application of Bayesian inference methods in parameter estimation and model selection, as well as their advantages in handling uncertainties. However, the research also points out the challenges faced by current technologies, such as dealing with non-Gaussian noise and improving computational efficiency. To address these issues, the study proposes a hybrid analysis framework combining physical models and data-driven methods. Finally, the research looks ahead to the potential applications of quantum computing in future gravitational wave data analysis. This study provides a comprehensive theoretical foundation for the optimization and innovation of gravitational wave data analysis methods, contributing to the advancement of gravitational wave astronomy.展开更多
A data buoy, when moored at the sea, will be influenced by different environmental factors such as wind and wave current. For this reason, the stability of a data buoy is of great importance. This paper describes the ...A data buoy, when moored at the sea, will be influenced by different environmental factors such as wind and wave current. For this reason, the stability of a data buoy is of great importance. This paper describes the analysis and calculation of the stability of a data buoy which has a weight suspended from its bottom under normal working conditions and the influence of the distance from the weight to the bottom of the buoy on the 'righting' ability of the buoy when it is capsized. The paper also provides the curves which show the influence of the size of the weight and the distance from the weight to the bottom of the buoy on the 'righting' ability of the buoy. All these are of great reference value for the design and use of a data buoy at sea and for the design of similar floating bodies. The results from calculations agree with those from the model experiment.展开更多
The rapidly increasing demand and complexity of manufacturing process potentiates the usage of manufacturing data with the highest priority to achieve precise analyze and control,rather than using simplified physical ...The rapidly increasing demand and complexity of manufacturing process potentiates the usage of manufacturing data with the highest priority to achieve precise analyze and control,rather than using simplified physical models and human expertise.In the era of data-driven manufacturing,the explosion of data amount revolutionized how data is collected and analyzed.This paper overviews the advance of technologies developed for in-process manufacturing data collection and analysis.It can be concluded that groundbreaking sensoring technology to facilitate direct measurement is one important leading trend for advanced data collection,due to the complexity and uncertainty during indirect measurement.On the other hand,physical model-based data analysis contains inevitable simplifications and sometimes ill-posed solutions due to the limited capacity of describing complex manufacturing process.Machine learning,especially deep learning approach has great potential for making better decisions to automate the process when fed with abundant data,while trending data-driven manufacturing approaches succeeded by using limited data to achieve similar or even better decisions.And these trends can demonstrated be by analyzing some typical applications of manufacturing process.展开更多
Energy efficiency data from ethylene production equipment are of high dimension, dynamic and time sequential, so their evaluation is affected by many factors. Abnormal data from ethylene production are eliminated thro...Energy efficiency data from ethylene production equipment are of high dimension, dynamic and time sequential, so their evaluation is affected by many factors. Abnormal data from ethylene production are eliminated through consistency test, making the data consumption uniform to improve the comparability of data. Due to the limit of input and output data of decision making unit in data envelopment analysis(DEA), the energy efficiency data from the same technology in a certain year are disposed monthly using DEA. The DEA data of energy efficiency from the same technology are weighted and fused using analytic hierarchy process. The energy efficiency data from different technologies are evaluated by their relative effectiveness to find the direction of energy saving and consumption reduction.展开更多
In the health field,longitudinal studies involve the recording of clinical observations of the same sample of pa-tients over successive periods,referred to as waves.This type of database serves as a valuable source of...In the health field,longitudinal studies involve the recording of clinical observations of the same sample of pa-tients over successive periods,referred to as waves.This type of database serves as a valuable source of infor-mation and insights,particularly when examining the temporal aspect,allowing the extraction of relevant and non-obvious knowledge.The triadic concept analysis theory has been proposed to describe the ternary re-lationships between objects,attributes,and conditions.In this study,we present a methodology for exploring longitudinal health databases using both the triadic theory and triadic rules,which are similar to association rules but incorporate temporal relations.Through four case studies,we demonstrate the potential of applying triadic analysis to longitudinal databases to identify risk patterns,enhance decision-making processes,and deepen our understanding of temporal dynamics.These findings suggest a promising approach for describing longitudinal databases and obtaining insights to improve clinical decision-support systems for disease treatment.展开更多
A method for identification of pulsations in time series of magnetic field data which are simultaneously present in multiple channels of data at one or more sensor locations is described. Candidate pulsations of inter...A method for identification of pulsations in time series of magnetic field data which are simultaneously present in multiple channels of data at one or more sensor locations is described. Candidate pulsations of interest are first identified in geomagnetic time series by inspection. Time series of these ＂training events＂ are represented in matrix form and transpose-multiplied to generate time- domain covariance matrices. The ranked eigenvectors of this matrix are stored as a feature of the pulsation. In the second stage of the algorithm, a sliding window （approxi- mately the width of the training event） is moved across the vector-valued time-series comprising the channels on which the training event was observed. At each window position, the data covariance matrix and associated eigen- vectors are calculated. We compare the orientation of the dominant eigenvectors of the training data to those from the windowed data and flag windows where the dominant eigenvectors directions are similar. This was successful in automatically identifying pulses which share polarization and appear to be from the same source process. We apply the method to a case study of continuously sampled （50 Hz） data from six observatories, each equipped with three- component induction coil magnetometers. We examine a 90-day interval of data associated with a cluster of four observatories located within 50 km of Napa, California, together with two remote reference stations-one 100 km to the north of the cluster and the other 350 km south. When the training data contains signals present in the remote reference observatories, we are reliably able to identify and extract global geomagnetic signals such as solar-generated noise. When training data contains pulsations only observed in the cluster of local observatories, we identify several types of non-plane wave signals having similar polarization.展开更多
基金Supported by the National Natural Science Foundation of China
文摘The Chang＇e-3 Visible and Near-infrared Imaging Spectrometer （VNIS） is one of the four payloads on the Yutu rover. After traversing the landing site during the first two lunar days, four different areas are detected, and Level 2A and 2B ra- diance data have been released to the scientific community. The released data have been processed by dark current subtraction, correction for the effect of temperature, radiometric calibration and geometric calibration. We emphasize approaches for re- flectance analysis and mineral identification for in-situ analysis with VNIS. Then the preliminary spectral and mineralogical results from the landing site are derived. After comparing spectral data from VNIS with data collected by the Ma instrument and samples of mare that were returned from the Apollo program, all the reflectance data have been found to have similar absorption features near 1000 nm except lunar sample 71061. In addition, there is also a weak absorption feature between 1750-2400nm on VNIS, but the slopes of VNIS and Ma reflectance at longer wavelengths are lower than data taken from samples of lunar mare. Spectral parameters such as Band Centers and Integrated Band Depth Ratios are used to analyze mineralogical features. The results show that detection points E and N205 are mixtures of high-Ca pyroxene and olivine, and the composition of olivineat point N205 is higher than that at point E, but the compositions of detection points S3 and N203 are mainly olivine-rich. Since there are no obvious absorption features near 1250 nm, plagioclase is not directly identified at the landing site.
基金This project supported by the National High-Tech Research and Development Plan (863-804-3)
文摘An idea is presented about the development of a data processing and analysis system for ICF experiments, which is based on an object oriented framework. The design and preliminary implementation of the data processing and analysis framework based on the ROOT system have been completed. Software for unfolding soft X-ray spectra has been developed to test the functions of this framework.
文摘Accuracy of coeffcient A_(isp) is related to the reference phase chosen during analysis. The cri- terion of choosing reference phase which may minimize the error of A_(isp) was deduced. The optimum results could be obtained by using the method of least squares if the number of sam- pies for analysis is more than the phase in samples. The procedure presented here is satisfacto- ryfor ordinary phase analysis.
文摘In order to study contemporary crustal movement of Antarctic,China has not only constructed the deformation monitoring network in West Antarctic Fildes strait region,but also monitored the network by using DI-20 Geodimeter and GPS instruments,and participated the Antarctic GPS Campaign Observation organized by SCAR as well.During mathematics processing of crustal horizontal deformation observations,a method to bring deformation parameters into the error equations of observations is discussed in this paper.Several classical deformation models,such as rigid body displacement and strain,are introduced in detail.By analyzing the reference datum of statistical geodetic network,a conclusion is drawn that it is unfit to use rank-defected reference datum for the crustal deformation analysis,and another method is developed to set up different additional weight matrix for every different kind of parameter,the classical adjustment and rank-defected adjustment are well unified.Two methods of considering or non-considering the relation between point parameters and deformation parameters are compared,and the former is more appropriate than the latter.A series of programs are developed to implementing the method mentioned above and the analysis of West Antarctic Fileds deformation monitoring network.It is also involved GPS data processing and analysis of deformation results in the paper.The research results indicate that it seems exacting displacement in Fildes rift region,but the displacement is not large,just a little rift shear movement.
基金supported by the National Natural Science Foundation of China (Grant No. 11173038)
文摘The microwave radiometer （MRM） onboard the Chang＇ E-1 （CE-I） lu- nar orbiter is a 4-frequency microwave radiometer, and it is mainly used to obtain the brightness temperature （TB） of the lunar surface, from which the thickness, temperature, dielectric constant and other related properties of the lunar regolith can be derived. The working mode of the CE-1 MRM, the ground calibration （including the official calibration coefficients）, as well as the acquisition and processing of the raw data are introduced. Our data analysis shows that TB increases with increasing frequency, decreases towards the lunar poles and is significantly affected by solar illumination. Our analysis also reveals that the main uncertainty in TB comes from ground calibration.
文摘With the increasing variety of application software of meteorological satellite ground system, how to provide reasonable hardware resources and improve the efficiency of software is paid more and more attention. In this paper, a set of software classification method based on software operating characteristics is proposed. The method uses software run-time resource consumption to describe the software running characteristics. Firstly, principal component analysis (PCA) is used to reduce the dimension of software running feature data and to interpret software characteristic information. Then the modified K-means algorithm was used to classify the meteorological data processing software. Finally, it combined with the results of principal component analysis to explain the significance of various types of integrated software operating characteristics. And it is used as the basis for optimizing the allocation of software hardware resources and improving the efficiency of software operation.
基金supported by the National Natural Science Foundation of China(NSFC,12173012 and 12473050)the Guangdong Natural Science Funds for Distinguished Young Scholars(2023B1515020049)+2 种基金the Shenzhen Science and Technology Project(JCYJ20240813104805008)the Shenzhen Key Laboratory Launching Project(No.ZDSYS20210702140800001)the Specialized Research Fund for State Key Laboratory of Solar Activity and Space Weather。
文摘The increasing demand for high-resolution solar observations has driven the development of advanced data processing and enhancement techniques for ground-based solar telescopes.This study focuses on developing a python-based package(GT-scopy)for data processing and enhancing for giant solar telescopes,with application to the 1.6 m Goode Solar Telescope(GST)at Big Bear Solar Observatory.The objective is to develop a modern data processing software for refining existing data acquisition,processing,and enhancement methodologies to achieve atmospheric effect removal and accurate alignment at the sub-pixel level,particularly within the processing levels 1.0-1.5.In this research,we implemented an integrated and comprehensive data processing procedure that includes image de-rotation,zone-of-interest selection,coarse alignment,correction for atmospheric distortions,and fine alignment at the sub-pixel level with an advanced algorithm.The results demonstrate a significant improvement in image quality,with enhanced visibility of fine solar structures both in sunspots and quiet-Sun regions.The enhanced data processing package developed in this study significantly improves the utility of data obtained from the GST,paving the way for more precise solar research and contributing to a better understanding of solar dynamics.This package can be adapted for other ground-based solar telescopes,such as the Daniel K.Inouye Solar Telescope(DKIST),the European Solar Telescope(EST),and the 8 m Chinese Giant Solar Telescope,potentially benefiting the broader solar physics community.
基金National Natural Science Foundation of China(No.42022025)。
文摘With the continued development of multiple Global Navigation Satellite Systems(GNSS)and the emergence of various frequencies,UnDifferenced and UnCombined(UDUC)data processing has become an increasingly attractive option.In this contribution,we provide an overview of the current status of UDUC GNSS data processing activities in China.These activities encompass the formulation of Precise Point Positioning(PPP)models and PPP-Real-Time Kinematic(PPP-RTK)models for processing single-station and multi-station GNSS data,respectively.Regarding single-station data processing,we discuss the advancements in PPP models,particularly the extension from a single system to multiple systems,and from dual frequencies to single and multiple frequencies.Additionally,we introduce the modified PPP model,which accounts for the time variation of receiver code biases,a departure from the conventional PPP model that typically assumes these biases to be time-constant.In the realm of multi-station PPP-RTK data processing,we introduce the ionosphere-weighted PPP-RTK model,which enhances the model strength by considering the spatial correlation of ionospheric delays.We also review the phase-only PPP-RTK model,designed to mitigate the impact of unmodelled code-related errors.Furthermore,we explore GLONASS PPP-RTK,achieved through the application of the integer-estimable model.For large-scale network data processing,we introduce the all-in-view PPP-RTK model,which alleviates the strict common-view requirement at all receivers.Moreover,we present the decentralized PPP-RTK data processing strategy,designed to improve computational efficiency.Overall,this work highlights the various advancements in UDUC GNSS data processing,providing insights into the state-of-the-art techniques employed in China to achieve precise GNSS applications.
基金supported by National Key Research and Development Program of China from MOST (2016YFB0501503)
文摘The High Precision Magnetometer(HPM) on board the China Seismo-Electromagnetic Satellite(CSES) allows highly accurate measurement of the geomagnetic field; it includes FGM(Fluxgate Magnetometer) and CDSM(Coupled Dark State Magnetometer)probes. This article introduces the main processing method, algorithm, and processing procedure of the HPM data. First, the FGM and CDSM probes are calibrated according to ground sensor data. Then the FGM linear parameters can be corrected in orbit, by applying the absolute vector magnetic field correction algorithm from CDSM data. At the same time, the magnetic interference of the satellite is eliminated according to ground-satellite magnetic test results. Finally, according to the characteristics of the magnetic field direction in the low latitude region, the transformation matrix between FGM probe and star sensor is calibrated in orbit to determine the correct direction of the magnetic field. Comparing the magnetic field data of CSES and SWARM satellites in five continuous geomagnetic quiet days, the difference in measurements of the vector magnetic field is about 10 nT, which is within the uncertainty interval of geomagnetic disturbance.
基金supported by National High Technology Research and Development Program of China(863 Program)(No.AA420060)
文摘In the course of network supported collaborative design,the data processing plays a very vital role.Much effort has been spent in this area,and many kinds of approaches have been proposed.Based on the correlative materials,this paper presents extensible markup language(XML)based strategy for several important problems of data processing in network supported collaborative design,such as the representation of standard for the exchange of product model data(STEP)with XML in the product information expression and the management of XML documents using relational database.The paper gives a detailed exposition on how to clarify the mapping between XML structure and the relationship database structure and how XML-QL queries can be translated into structured query language(SQL)queries.Finally,the structure of data processing system based on XML is presented.
文摘With the advent of the big data era,real-time data analysis and decision-support systems have been recognized as essential tools for enhancing enterprise competitiveness and optimizing the decision-making process.This study aims to explore the development strategies of real-time data analysis and decision-support systems,and analyze their application status and future development trends in various industries.The article first reviews the basic concepts and importance of real-time data analysis and decision-support systems,and then discusses in detail the key technical aspects such as system architecture,data collection and processing,analysis methods,and visualization techniques.
文摘This paper analyzes the advantages of legal digital currencies and explores their impact on bank big data practices.By combining bank big data collection and processing,it clarifies that legal digital currencies can enhance the efficiency of bank data processing,enrich data types,and strengthen data analysis and application capabilities.In response to future development needs,it is necessary to strengthen data collection management,enhance data processing capabilities,innovate big data application models,and provide references for bank big data practices,promoting the transformation and upgrading of the banking industry in the context of legal digital currencies.
基金by the National Key Research and Development Program of China(2023YFC3303701-02 and 2024YFC3306701)the National Natural Science Foundation of China(T2425014 and 32270667)+3 种基金the Natural Science Foundation of Fujian Province of China(2023J06013)the Major Project of the National Social Science Foundation of China granted to Chuan-Chao Wang(21&ZD285)Open Research Fund of State Key Laboratory of Genetic Engineering at Fudan University(SKLGE-2310)Open Research Fund of Forensic Genetics Key Laboratory of the Ministry of Public Security(2023FGKFKT07).
文摘The analysis of ancient genomics provides opportunities to explore human population history across both temporal and geographic dimensions(Haak et al.,2015;Wang et al.,2021,2024)to enhance the accessibility and utility of these ancient genomic datasets,a range of databases and advanced statistical models have been developed,including the Allen Ancient DNA Resource(AADR)(Mallick et al.,2024)and AdmixTools(Patterson et al.,2012).While upstream processes such as sequencing and raw data processing have been streamlined by resources like the AADR,the downstream analysis of these datasets-encompassing population genetics inference and spatiotemporal interpretation-remains a significant challenge.The AADR provides a unified collection of published ancient DNA(aDNA)data,yet its file-based format and reliance on command-line tools,such as those in Admix-Tools(Patterson et al.,2012),require advanced computational expertise for effective exploration and analysis.These requirements can present significant challenges forresearchers lackingadvanced computational expertise,limiting the accessibility and broader application of these valuable genomic resources.
文摘In order to research contemporary crustal movement of Antarctica, China has constructed the deformation monitoring network in the Fildes Strait region,West Antarctica, monitored the network by using DI 20 geodimeter and GPS instruments, and participated the Antarctic GPS Campaign Observation organized by SCAR as well. During mathematics processing of crustal horizontal deformation observations,a method to bring deformation parameters into the error equations of observations is discussed in this paper. Several classical deformation models,such as rigid body displacement and strain,are introduced. By analyzing the reference datum of static and dynamic geodetic network,the method is developed to set up different additional weight matrix for every different kind of parameter. A series of programs are developed to implementing the method mentioned above and the analysis of West Antarctic Fildes Strait deformation monitoring network. Discussion is also made of GPS monitoring data by using the principle of monitoring network strain analysis in the paper. The research results indicate that the displacement did occur in Fildes rift region,but the displacement was not large,just a slight rift shear movement.
文摘Gravitational wave detection is one of the most cutting-edge research areas in modern physics, with its success relying on advanced data analysis and signal processing techniques. This study provides a comprehensive review of data analysis methods and signal processing techniques in gravitational wave detection. The research begins by introducing the characteristics of gravitational wave signals and the challenges faced in their detection, such as extremely low signal-to-noise ratios and complex noise backgrounds. It then systematically analyzes the application of time-frequency analysis methods in extracting transient gravitational wave signals, including wavelet transforms and Hilbert-Huang transforms. The study focuses on discussing the crucial role of matched filtering techniques in improving signal detection sensitivity and explores strategies for template bank optimization. Additionally, the research evaluates the potential of machine learning algorithms, especially deep learning networks, in rapidly identifying and classifying gravitational wave events. The study also analyzes the application of Bayesian inference methods in parameter estimation and model selection, as well as their advantages in handling uncertainties. However, the research also points out the challenges faced by current technologies, such as dealing with non-Gaussian noise and improving computational efficiency. To address these issues, the study proposes a hybrid analysis framework combining physical models and data-driven methods. Finally, the research looks ahead to the potential applications of quantum computing in future gravitational wave data analysis. This study provides a comprehensive theoretical foundation for the optimization and innovation of gravitational wave data analysis methods, contributing to the advancement of gravitational wave astronomy.
文摘A data buoy, when moored at the sea, will be influenced by different environmental factors such as wind and wave current. For this reason, the stability of a data buoy is of great importance. This paper describes the analysis and calculation of the stability of a data buoy which has a weight suspended from its bottom under normal working conditions and the influence of the distance from the weight to the bottom of the buoy on the 'righting' ability of the buoy when it is capsized. The paper also provides the curves which show the influence of the size of the weight and the distance from the weight to the bottom of the buoy on the 'righting' ability of the buoy. All these are of great reference value for the design and use of a data buoy at sea and for the design of similar floating bodies. The results from calculations agree with those from the model experiment.
基金Supported by National Natural Science Foundation of China(Grant No.51805260)National Natural Science Foundation for Distinguished Young Scholars of China(Grant No.51925505)National Natural Science Foundation of China(Grant No.51775278).
文摘The rapidly increasing demand and complexity of manufacturing process potentiates the usage of manufacturing data with the highest priority to achieve precise analyze and control,rather than using simplified physical models and human expertise.In the era of data-driven manufacturing,the explosion of data amount revolutionized how data is collected and analyzed.This paper overviews the advance of technologies developed for in-process manufacturing data collection and analysis.It can be concluded that groundbreaking sensoring technology to facilitate direct measurement is one important leading trend for advanced data collection,due to the complexity and uncertainty during indirect measurement.On the other hand,physical model-based data analysis contains inevitable simplifications and sometimes ill-posed solutions due to the limited capacity of describing complex manufacturing process.Machine learning,especially deep learning approach has great potential for making better decisions to automate the process when fed with abundant data,while trending data-driven manufacturing approaches succeeded by using limited data to achieve similar or even better decisions.And these trends can demonstrated be by analyzing some typical applications of manufacturing process.
基金Supported by the National Natural Science Foundation of China(61374166)the Doctoral Fund of Ministry of Education of China(20120010110010)the Fundamental Research Funds for the Central Universities(YS1404)
文摘Energy efficiency data from ethylene production equipment are of high dimension, dynamic and time sequential, so their evaluation is affected by many factors. Abnormal data from ethylene production are eliminated through consistency test, making the data consumption uniform to improve the comparability of data. Due to the limit of input and output data of decision making unit in data envelopment analysis(DEA), the energy efficiency data from the same technology in a certain year are disposed monthly using DEA. The DEA data of energy efficiency from the same technology are weighted and fused using analytic hierarchy process. The energy efficiency data from different technologies are evaluated by their relative effectiveness to find the direction of energy saving and consumption reduction.
文摘In the health field,longitudinal studies involve the recording of clinical observations of the same sample of pa-tients over successive periods,referred to as waves.This type of database serves as a valuable source of infor-mation and insights,particularly when examining the temporal aspect,allowing the extraction of relevant and non-obvious knowledge.The triadic concept analysis theory has been proposed to describe the ternary re-lationships between objects,attributes,and conditions.In this study,we present a methodology for exploring longitudinal health databases using both the triadic theory and triadic rules,which are similar to association rules but incorporate temporal relations.Through four case studies,we demonstrate the potential of applying triadic analysis to longitudinal databases to identify risk patterns,enhance decision-making processes,and deepen our understanding of temporal dynamics.These findings suggest a promising approach for describing longitudinal databases and obtaining insights to improve clinical decision-support systems for disease treatment.
文摘A method for identification of pulsations in time series of magnetic field data which are simultaneously present in multiple channels of data at one or more sensor locations is described. Candidate pulsations of interest are first identified in geomagnetic time series by inspection. Time series of these ＂training events＂ are represented in matrix form and transpose-multiplied to generate time- domain covariance matrices. The ranked eigenvectors of this matrix are stored as a feature of the pulsation. In the second stage of the algorithm, a sliding window （approxi- mately the width of the training event） is moved across the vector-valued time-series comprising the channels on which the training event was observed. At each window position, the data covariance matrix and associated eigen- vectors are calculated. We compare the orientation of the dominant eigenvectors of the training data to those from the windowed data and flag windows where the dominant eigenvectors directions are similar. This was successful in automatically identifying pulses which share polarization and appear to be from the same source process. We apply the method to a case study of continuously sampled （50 Hz） data from six observatories, each equipped with three- component induction coil magnetometers. We examine a 90-day interval of data associated with a cluster of four observatories located within 50 km of Napa, California, together with two remote reference stations-one 100 km to the north of the cluster and the other 350 km south. When the training data contains signals present in the remote reference observatories, we are reliably able to identify and extract global geomagnetic signals such as solar-generated noise. When training data contains pulsations only observed in the cluster of local observatories, we identify several types of non-plane wave signals having similar polarization.
