Dear Editor,Aiming at the consensus tracking problem of a class of unknown heterogeneous nonlinear multiagent systems(MASs)with input constraints,a novel data-driven iterative learning consensus control(ILCC)protocol ...Dear Editor,Aiming at the consensus tracking problem of a class of unknown heterogeneous nonlinear multiagent systems(MASs)with input constraints,a novel data-driven iterative learning consensus control(ILCC)protocol based on zeroing neural networks(ZNNs)is proposed.First,a dynamic linearization data model(DLDM)is acquired via dynamic linearization technology(DLT).展开更多
Data-driven techniques are reshaping blast furnace iron-making process(BFIP)modeling,but their“black-box”nature often obscures interpretability and accuracy.To overcome these limitations,our mechanism and data co-dr...Data-driven techniques are reshaping blast furnace iron-making process(BFIP)modeling,but their“black-box”nature often obscures interpretability and accuracy.To overcome these limitations,our mechanism and data co-driven strategy(MDCDS)enhances model transparency and molten iron quality(MIQ)prediction.By zoning the furnace and applying mechanism-based features for material and thermal trends,coupled with a novel stationary broad feature learning system(StaBFLS),interference caused by nonstationary process characteristics are mitigated and the intrinsic information embedded in BFIP is mined.Subsequently,by integrating stationary feature representation with mechanism features,our temporal matching broad learning system(TMBLS)aligns process and quality variables using MIQ as the target.This integration allows us to establish process monitoring statistics using both mechanism and data-driven features,as well as detect modeling deviations.Validated against real-world BFIP data,our MDCDS model demonstrates consistent process alignment,robust feature extraction,and improved MIQ modeling—Yielding better fault detection.Additionally,we offer detailed insights into the validation process,including parameter baselining and optimization.展开更多
Multidatabase systems are designed to achieve schema integration and data interoperation among distributed and heterogeneous database systems. But data model heterogeneity and schema heterogeneity make this a challeng...Multidatabase systems are designed to achieve schema integration and data interoperation among distributed and heterogeneous database systems. But data model heterogeneity and schema heterogeneity make this a challenging task. A multidatabase common data model is firstly introduced based on XML, named XML-based Integration Data Model (XIDM), which is suitable for integrating different types of schemas. Then an approach of schema mappings based on XIDM in multidatabase systems has been presented. The mappings include global mappings, dealing with horizontal and vertical partitioning between global schemas and export schemas, and local mappings, processing the transformation between export schemas and local schemas. Finally, the illustration and implementation of schema mappings in a multidatabase prototype - Panorama system are also discussed. The implementation results demonstrate that the XIDM is an efficient model for managing multiple heterogeneous data sources and the approaches of schema mapping based on XIDM behave very well when integrating relational, object-oriented database systems and other file systems.展开更多
The technique of incremental updating,which can better guarantee the real-time situation of navigational map,is the developing orientation of navigational road network updating.The data center of vehicle navigation sy...The technique of incremental updating,which can better guarantee the real-time situation of navigational map,is the developing orientation of navigational road network updating.The data center of vehicle navigation system is in charge of storing incremental data,and the spatio-temporal data model for storing incremental data does affect the efficiency of the response of the data center to the requirements of incremental data from the vehicle terminal.According to the analysis on the shortcomings of several typical spatio-temporal data models used in the data center and based on the base map with overlay model,the reverse map with overlay model (RMOM) was put forward for the data center to make rapid response to incremental data request.RMOM supports the data center to store not only the current complete road network data,but also the overlays of incremental data from the time when each road network changed to the current moment.Moreover,the storage mechanism and index structure of the incremental data were designed,and the implementation algorithm of RMOM was developed.Taking navigational road network in Guangzhou City as an example,the simulation test was conducted to validate the efficiency of RMOM.Results show that the navigation database in the data center can response to the requirements of incremental data by only one query with RMOM,and costs less time.Compared with the base map with overlay model,the data center does not need to temporarily overlay incremental data with RMOM,so time-consuming of response is significantly reduced.RMOM greatly improves the efficiency of response and provides strong support for the real-time situation of navigational road network.展开更多
This paper describes multi view modeling and data model transformation for the modeling. We have proposed a reference model of CAD system generation, which can be applied to various domain specific languages. Howeve...This paper describes multi view modeling and data model transformation for the modeling. We have proposed a reference model of CAD system generation, which can be applied to various domain specific languages. However, the current CAD system generation cannot integrate data of multiple domains. Generally each domain has its own view of products. For example, in the domain of architectural structure, designers extract the necessary data from the data in architecture design. Domain experts translate one view into another view beyond domains using their own brains.The multi view modeling is a way to integrate product data of multiple domains, and make it possible to translate views among various domains by computers.展开更多
The study aimed to develop a customized Data Governance Maturity Model (DGMM) for the Ministry of Defence (MoD) in Kenya to address data governance challenges in military settings. Current frameworks lack specific req...The study aimed to develop a customized Data Governance Maturity Model (DGMM) for the Ministry of Defence (MoD) in Kenya to address data governance challenges in military settings. Current frameworks lack specific requirements for the defence industry. The model uses Key Performance Indicators (KPIs) to enhance data governance procedures. Design Science Research guided the study, using qualitative and quantitative methods to gather data from MoD personnel. Major deficiencies were found in data integration, quality control, and adherence to data security regulations. The DGMM helps the MOD improve personnel, procedures, technology, and organizational elements related to data management. The model was tested against ISO/IEC 38500 and recommended for use in other government sectors with similar data governance issues. The DGMM has the potential to enhance data management efficiency, security, and compliance in the MOD and guide further research in military data governance.展开更多
AIM: To build and evaluate predictive models for contrast-enhanced ultrasound(CEUS) of the breast to distinguish between benign and malignant lesions. METHODS: A total of 235 breast imaging reporting and data system(B...AIM: To build and evaluate predictive models for contrast-enhanced ultrasound(CEUS) of the breast to distinguish between benign and malignant lesions. METHODS: A total of 235 breast imaging reporting and data system(BI-RADS) 4 solid breast lesions were imaged via CEUS before core needle biopsy or surgical resection. CEUS results were analyzed on 10 enhancing patterns to evaluate diagnostic performance of three benign and three malignant CEUS models, with pathological results used as the gold standard. A logistic regression model was developed basing on the CEUS results, and then evaluated with receiver operating curve(ROC). RESULTS: Except in cases of enhanced homogeneity, the rest of the 9 enhancement appearances were statistically significant(P < 0.05). These 9 enhancement patterns were selected in the final step of the logistic regression analysis, with diagnostic sensitivity and specificity of 84.4% and 82.7%, respectively, and the area under the ROC curve of 0.911. Diagnostic sensitivity, specificity, and accuracy of the malignant vs benign CEUS models were 84.38%, 87.77%, 86.38% and 86.46%, 81.29% and 83.40%, respectively. CONCLUSION: The breast CEUS models can predict risk of malignant breast lesions more accurately, decrease false-positive biopsy, and provide accurate BIRADS classification.展开更多
In this paper,the entity_relation data model for integrating spatio_temporal data is designed.In the design,spatio_temporal data can be effectively stored and spatiao_temporal analysis can be easily realized.
Geographic Hypermedia(GH)is a rich and interactive map document with geo-tagged graphics,sound and video ele-ments.A Geographic Hypermedia System(GHS)is designed to manage,query,display and explore GH resources.Recogn...Geographic Hypermedia(GH)is a rich and interactive map document with geo-tagged graphics,sound and video ele-ments.A Geographic Hypermedia System(GHS)is designed to manage,query,display and explore GH resources.Recognizing emerging geo-tagged videos and measurable images as valuable geographic data resources,this paper aims to design a web-based GHS using web mapping,geoprocessing,video streaming and XMLHTTP services.The concept,data model,system design and implementation of this GHS are discussed in detail.Geo-tagged videos are modeled as temporal,spatial and metadata entities such as video clip,video path and frame-based descriptions.Similarly,geo-tagged stereo video and derived data are modeled as interre-lated entities:original video,rectified video,stereo video,video path,frame-based description and measurable image(rectified and disparity image with baseline,interior and exterior parameters).The entity data are organized into video files,GIS layers with linear referencing and XML documents for web publishing.These data can be integrated in HTML pages or used as Rich Internet Appli-cations(RIA)using standard web technologies such as the AJAX,ASP.NET and RIA frameworks.An SOA-based GHS is designed using four types of web services:ArcGIS Server 9.3 web mapping and geoprocessing services,Flash FMS 3.0 video streaming ser-vices and GeoRSS XMLHTTP services.GHS applications in road facility management and campus hypermapping indicate that the GH data models and technical solutions introduced in this paper are useful and flexible enough for wider deployment as a GHS.展开更多
Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s in...Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s include system design, integration of object-oriented technology, data distri bution, collaborative and distributed manufacturing working environment, secur ity, and web-based integration. However, there are limitations on their rese arches. In particular, they cannot cater for PDM in distributed manufacturing e nvironment. This is especially true in South China, where many Hong Kong (HK) ma nufacturers have moved their production plants to different locations in Pearl R iver Delta for cost reduction. However, they retain their main offices in HK. Development of PDM system is inherently complex. Product related data cover prod uct name, product part number (product identification), drawings, material speci fications, dimension requirement, quality specification, test result, log size, production schedules, product data version and date of release, special tooling (e.g. jig and fixture), mould design, project engineering in charge, cost spread sheets, while process data includes engineering release, engineering change info rmation management, and other workflow related to the process information. Accor ding to Cornelissen et al., the contemporary PDM system should contains manageme nt functions in structure, retrieval, release, change, and workflow. In system design, development and implementation, a formal specification is nece ssary. However, there is no formal representation model for PDM system. Theref ore a graphical representation model is constructed to express the various scena rios of interactions between users and the PDM system. Statechart is then used to model the operations of PDM system, Fig.1. Statechart model bridges the curr ent gap between requirements, scenarios, and the initial design specifications o f PDM system. After properly analyzing the PDM system, a new distributed PDM (DPDM) system is proposed. Both graphical representation and statechart models are constructed f or the new DPDM system, Fig.2. New product data of DPDM and new system function s are then investigated to support product information flow in the new distribut ed environment. It is found that statecharts allow formal representations to capture the informa tion and control flows of both PDM and DPDM. In particular, statechart offers a dditional expressive power, when compared to conventional state transition diagr am, in terms of hierarchy, concurrency, history, and timing for DPDM behavioral modeling.展开更多
The increasing complexity of China’s electricity market creates substantial challenges for settlement automation,data consistency,and operational scalability.Existing provincial settlement systems are fragmented,lack...The increasing complexity of China’s electricity market creates substantial challenges for settlement automation,data consistency,and operational scalability.Existing provincial settlement systems are fragmented,lack a unified data structure,and depend heavily on manual intervention to process high-frequency and retroactive transactions.To address these limitations,a graph-based unified settlement framework is proposed to enhance automation,flexibility,and adaptability in electricity market settlements.A flexible attribute-graph model is employed to represent heterogeneousmulti-market data,enabling standardized integration,rapid querying,and seamless adaptation to evolving business requirements.An extensible operator library is designed to support configurable settlement rules,and a suite of modular tools—including dataset generation,formula configuration,billing templates,and task scheduling—facilitates end-to-end automated settlement processing.A robust refund-clearing mechanism is further incorporated,utilizing sandbox execution,data-version snapshots,dynamic lineage tracing,and real-time changecapture technologies to enable rapid and accurate recalculations under dynamic policy and data revisions.Case studies based on real-world data from regional Chinese markets validate the effectiveness of the proposed approach,demonstrating marked improvements in computational efficiency,system robustness,and automation.Moreover,enhanced settlement accuracy and high temporal granularity improve price-signal fidelity,promote cost-reflective tariffs,and incentivize energy-efficient and demand-responsive behavior among market participants.The method not only supports equitable and transparent market operations but also provides a generalizable,scalable foundation for modern electricity settlement platforms in increasingly complex and dynamic market environments.展开更多
To improve the performance of the traditional map matching algorithms in freeway traffic state monitoring systems using the low logging frequency GPS （global positioning system） probe data, a map matching algorithm ...To improve the performance of the traditional map matching algorithms in freeway traffic state monitoring systems using the low logging frequency GPS （global positioning system） probe data, a map matching algorithm based on the Oracle spatial data model is proposed. The algorithm uses the Oracle road network data model to analyze the spatial relationships between massive GPS positioning points and freeway networks, builds an N-shortest path algorithm to find reasonable candidate routes between GPS positioning points efficiently, and uses the fuzzy logic inference system to determine the final matched traveling route. According to the implementation with field data from Los Angeles, the computation speed of the algorithm is about 135 GPS positioning points per second and the accuracy is 98.9%. The results demonstrate the effectiveness and accuracy of the proposed algorithm for mapping massive GPS positioning data onto freeway networks with complex geometric characteristics.展开更多
An object oriented data modelling in computer aided design (CAD) databases is focused. Starting with the discussion of data modelling requirements for CAD applications, appropriate data modelling features are introdu...An object oriented data modelling in computer aided design (CAD) databases is focused. Starting with the discussion of data modelling requirements for CAD applications, appropriate data modelling features are introduced herewith. A feasible approach to select the “best” data model for an application is to analyze the data which has to be stored in the database. A data model is appropriate for modelling a given task if the information of the application environment can be easily mapped to the data model. Thus, the involved data are analyzed and then object oriented data model appropriate for CAD applications are derived. Based on the reviewed object oriented techniques applied in CAD, object oriented data modelling in CAD is addressed in details. At last 3D geometrical data models and implementation of their data model using the object oriented method are presented.展开更多
The conception of multilevel security (MLS) is commonly used in the study of data model for secure database. But there are some limitations in the basic MLS model, such as inference channels. The availability and data...The conception of multilevel security (MLS) is commonly used in the study of data model for secure database. But there are some limitations in the basic MLS model, such as inference channels. The availability and data integrity of the system are seriously constrained by it′s 'No Read Up, No Write Down' property in the basic MLS model. In order to eliminate the covert channels, the polyinstantiation and the cover story are used in the new data model. The read and write rules have been redefined for improving the agility and usability of the system based on the MLS model. All the methods in the improved data model make the system more secure, agile and usable.展开更多
A uniform metadata representation is introduced for heterogeneous databases, multi media information and other information sources. Some features about metadata are analyzed. The limitation of existing metadata model...A uniform metadata representation is introduced for heterogeneous databases, multi media information and other information sources. Some features about metadata are analyzed. The limitation of existing metadata model is compared with the new one. The metadata model is described in XML which is fit for metadata denotation and exchange. The well structured data, semi structured data and those exterior file data without structure are described in the metadata model. The model provides feasibility and extensibility for constructing uniform metadata model of data warehouse.展开更多
In the synthesis of the control algorithm for complex systems, we are often faced with imprecise or unknown mathematical models of the dynamical systems, or even with problems in finding a mathematical model of the sy...In the synthesis of the control algorithm for complex systems, we are often faced with imprecise or unknown mathematical models of the dynamical systems, or even with problems in finding a mathematical model of the system in the open loop. To tackle these difficulties, an approach of data-driven model identification and control algorithm design based on the maximum stability degree criterion is proposed in this paper. The data-driven model identification procedure supposes the finding of the mathematical model of the system based on the undamped transient response of the closed-loop system. The system is approximated with the inertial model, where the coefficients are calculated based on the values of the critical transfer coefficient, oscillation amplitude and period of the underdamped response of the closed-loop system. The data driven control design supposes that the tuning parameters of the controller are calculated based on the parameters obtained from the previous step of system identification and there are presented the expressions for the calculation of the tuning parameters. The obtained results of data-driven model identification and algorithm for synthesis the controller were verified by computer simulation.展开更多
This is the final of a three-part series of papers which mainly discusses the implementation issues of the CRNM. The first two papers in the series have introduced the modeling background and methodology, respectively...This is the final of a three-part series of papers which mainly discusses the implementation issues of the CRNM. The first two papers in the series have introduced the modeling background and methodology, respectively. An overall architecture of the CRNM has been proposed in the last paper. On the basis of the above discusses, a linear reference method (LRM) for providing spatial references for location points of a trajectory is developed. A case study is introduced to illustrate the application of the CRNM for modeling a road network in the real world is given. A comprehensive conclusion is given for the series of papers.展开更多
This is the second of a three-part series of papers which presents the principle and architecture of the CRNM, a trajectory-oriented, carriageway-based road network data model. The first part of the series has introdu...This is the second of a three-part series of papers which presents the principle and architecture of the CRNM, a trajectory-oriented, carriageway-based road network data model. The first part of the series has introduced a general background of building trajectory-oriented road network data models, including motivation, related works, and basic concepts. Based on it, this paper describs the CRNM in detail. At first, the notion of basic roadway entity is proposed and discussed. Secondly, carriageway is selected as the basic roadway entity after compared with other kinds of roadway, and approaches to representing other roadways with carriageways are introduced. At last, an overall architecture of the CRNM is proposed.展开更多
This is the first of a three-part series of pape rs which introduces a general background of building trajectory-oriented road net work data models, including motivation, related works, and basic concepts. The p urpos...This is the first of a three-part series of pape rs which introduces a general background of building trajectory-oriented road net work data models, including motivation, related works, and basic concepts. The p urpose of the series is to develop a trajectory-oriented road network data mode l, namely carriageway-based road network data model (CRNM). Part 1 deals with t he modeling background. Part 2 proposes the principle and architecture of the CR NM. Part 3 investigates the implementation of the CRNM in a case study. In the p resent paper, the challenges of managing trajectory data are discussed. Then, de veloping trajectory-oriented road network data models is proposed as a solution and existing road network data models are reviewed. Basic representation approa ches of a road network are introduced as well as its constitution.展开更多
Symbol portrayal is an important function of GIS. Sharing symbolic information in different GIS platforms is necessary for GIS applications and users. This paper discusses the necessity, possibility and solution techn...Symbol portrayal is an important function of GIS. Sharing symbolic information in different GIS platforms is necessary for GIS applications and users. This paper discusses the necessity, possibility and solution technique of sharing a symbol library in different GIS platforms. The route map is designed as follows： first, to set up a general data model for the symbol library, then to design a standard exchange format, and finally to call on the GIS manufacturer to provide the interchange tools for their symbol library for the standard exchange format. This paper analyzes the general characteristics of GIS symbolic library, gives a symbol library model and a draft of XML schema of the symbol library exchange format.展开更多
基金supported by the National Nature Science Foundation of China(U21A20166)the Science and Technology Development Foundation of Jilin Province(20230508095RC)+2 种基金the Major Science and Technology Projects of Jilin Province and Changchun City(20220301033GX)the Development and Reform Commission Foundation of Jilin Province(2023C034-3)the Interdisciplinary Integration and Innovation Project of JLU(JLUXKJC2020202).
文摘Dear Editor,Aiming at the consensus tracking problem of a class of unknown heterogeneous nonlinear multiagent systems(MASs)with input constraints,a novel data-driven iterative learning consensus control(ILCC)protocol based on zeroing neural networks(ZNNs)is proposed.First,a dynamic linearization data model(DLDM)is acquired via dynamic linearization technology(DLT).
基金supported in part by the National Natural Science Foundation of China(61933015,61703371,62273030)the Central University Basic Research Fund of China(K20200002)(for NGICS Platform,Zhejiang University)the Social Development Project of Zhejiang Provincial Public Technology Research(LGF19F030004,LGG21F030015).
文摘Data-driven techniques are reshaping blast furnace iron-making process(BFIP)modeling,but their“black-box”nature often obscures interpretability and accuracy.To overcome these limitations,our mechanism and data co-driven strategy(MDCDS)enhances model transparency and molten iron quality(MIQ)prediction.By zoning the furnace and applying mechanism-based features for material and thermal trends,coupled with a novel stationary broad feature learning system(StaBFLS),interference caused by nonstationary process characteristics are mitigated and the intrinsic information embedded in BFIP is mined.Subsequently,by integrating stationary feature representation with mechanism features,our temporal matching broad learning system(TMBLS)aligns process and quality variables using MIQ as the target.This integration allows us to establish process monitoring statistics using both mechanism and data-driven features,as well as detect modeling deviations.Validated against real-world BFIP data,our MDCDS model demonstrates consistent process alignment,robust feature extraction,and improved MIQ modeling—Yielding better fault detection.Additionally,we offer detailed insights into the validation process,including parameter baselining and optimization.
文摘Multidatabase systems are designed to achieve schema integration and data interoperation among distributed and heterogeneous database systems. But data model heterogeneity and schema heterogeneity make this a challenging task. A multidatabase common data model is firstly introduced based on XML, named XML-based Integration Data Model (XIDM), which is suitable for integrating different types of schemas. Then an approach of schema mappings based on XIDM in multidatabase systems has been presented. The mappings include global mappings, dealing with horizontal and vertical partitioning between global schemas and export schemas, and local mappings, processing the transformation between export schemas and local schemas. Finally, the illustration and implementation of schema mappings in a multidatabase prototype - Panorama system are also discussed. The implementation results demonstrate that the XIDM is an efficient model for managing multiple heterogeneous data sources and the approaches of schema mapping based on XIDM behave very well when integrating relational, object-oriented database systems and other file systems.
基金Under the auspices of National High Technology Research and Development Program of China (No.2007AA12Z242)
文摘The technique of incremental updating,which can better guarantee the real-time situation of navigational map,is the developing orientation of navigational road network updating.The data center of vehicle navigation system is in charge of storing incremental data,and the spatio-temporal data model for storing incremental data does affect the efficiency of the response of the data center to the requirements of incremental data from the vehicle terminal.According to the analysis on the shortcomings of several typical spatio-temporal data models used in the data center and based on the base map with overlay model,the reverse map with overlay model (RMOM) was put forward for the data center to make rapid response to incremental data request.RMOM supports the data center to store not only the current complete road network data,but also the overlays of incremental data from the time when each road network changed to the current moment.Moreover,the storage mechanism and index structure of the incremental data were designed,and the implementation algorithm of RMOM was developed.Taking navigational road network in Guangzhou City as an example,the simulation test was conducted to validate the efficiency of RMOM.Results show that the navigation database in the data center can response to the requirements of incremental data by only one query with RMOM,and costs less time.Compared with the base map with overlay model,the data center does not need to temporarily overlay incremental data with RMOM,so time-consuming of response is significantly reduced.RMOM greatly improves the efficiency of response and provides strong support for the real-time situation of navigational road network.
文摘This paper describes multi view modeling and data model transformation for the modeling. We have proposed a reference model of CAD system generation, which can be applied to various domain specific languages. However, the current CAD system generation cannot integrate data of multiple domains. Generally each domain has its own view of products. For example, in the domain of architectural structure, designers extract the necessary data from the data in architecture design. Domain experts translate one view into another view beyond domains using their own brains.The multi view modeling is a way to integrate product data of multiple domains, and make it possible to translate views among various domains by computers.
文摘The study aimed to develop a customized Data Governance Maturity Model (DGMM) for the Ministry of Defence (MoD) in Kenya to address data governance challenges in military settings. Current frameworks lack specific requirements for the defence industry. The model uses Key Performance Indicators (KPIs) to enhance data governance procedures. Design Science Research guided the study, using qualitative and quantitative methods to gather data from MoD personnel. Major deficiencies were found in data integration, quality control, and adherence to data security regulations. The DGMM helps the MOD improve personnel, procedures, technology, and organizational elements related to data management. The model was tested against ISO/IEC 38500 and recommended for use in other government sectors with similar data governance issues. The DGMM has the potential to enhance data management efficiency, security, and compliance in the MOD and guide further research in military data governance.
文摘AIM: To build and evaluate predictive models for contrast-enhanced ultrasound(CEUS) of the breast to distinguish between benign and malignant lesions. METHODS: A total of 235 breast imaging reporting and data system(BI-RADS) 4 solid breast lesions were imaged via CEUS before core needle biopsy or surgical resection. CEUS results were analyzed on 10 enhancing patterns to evaluate diagnostic performance of three benign and three malignant CEUS models, with pathological results used as the gold standard. A logistic regression model was developed basing on the CEUS results, and then evaluated with receiver operating curve(ROC). RESULTS: Except in cases of enhanced homogeneity, the rest of the 9 enhancement appearances were statistically significant(P < 0.05). These 9 enhancement patterns were selected in the final step of the logistic regression analysis, with diagnostic sensitivity and specificity of 84.4% and 82.7%, respectively, and the area under the ROC curve of 0.911. Diagnostic sensitivity, specificity, and accuracy of the malignant vs benign CEUS models were 84.38%, 87.77%, 86.38% and 86.46%, 81.29% and 83.40%, respectively. CONCLUSION: The breast CEUS models can predict risk of malignant breast lesions more accurately, decrease false-positive biopsy, and provide accurate BIRADS classification.
基金Project supported by the National Surveying Technical Fund(No.200_07)
文摘In this paper,the entity_relation data model for integrating spatio_temporal data is designed.In the design,spatio_temporal data can be effectively stored and spatiao_temporal analysis can be easily realized.
基金Supported by the National Natural Science Foundation of China (No.40771166 )the Henan University Foundation (No.SBGJ090605)
文摘Geographic Hypermedia(GH)is a rich and interactive map document with geo-tagged graphics,sound and video ele-ments.A Geographic Hypermedia System(GHS)is designed to manage,query,display and explore GH resources.Recognizing emerging geo-tagged videos and measurable images as valuable geographic data resources,this paper aims to design a web-based GHS using web mapping,geoprocessing,video streaming and XMLHTTP services.The concept,data model,system design and implementation of this GHS are discussed in detail.Geo-tagged videos are modeled as temporal,spatial and metadata entities such as video clip,video path and frame-based descriptions.Similarly,geo-tagged stereo video and derived data are modeled as interre-lated entities:original video,rectified video,stereo video,video path,frame-based description and measurable image(rectified and disparity image with baseline,interior and exterior parameters).The entity data are organized into video files,GIS layers with linear referencing and XML documents for web publishing.These data can be integrated in HTML pages or used as Rich Internet Appli-cations(RIA)using standard web technologies such as the AJAX,ASP.NET and RIA frameworks.An SOA-based GHS is designed using four types of web services:ArcGIS Server 9.3 web mapping and geoprocessing services,Flash FMS 3.0 video streaming ser-vices and GeoRSS XMLHTTP services.GHS applications in road facility management and campus hypermapping indicate that the GH data models and technical solutions introduced in this paper are useful and flexible enough for wider deployment as a GHS.
文摘Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s include system design, integration of object-oriented technology, data distri bution, collaborative and distributed manufacturing working environment, secur ity, and web-based integration. However, there are limitations on their rese arches. In particular, they cannot cater for PDM in distributed manufacturing e nvironment. This is especially true in South China, where many Hong Kong (HK) ma nufacturers have moved their production plants to different locations in Pearl R iver Delta for cost reduction. However, they retain their main offices in HK. Development of PDM system is inherently complex. Product related data cover prod uct name, product part number (product identification), drawings, material speci fications, dimension requirement, quality specification, test result, log size, production schedules, product data version and date of release, special tooling (e.g. jig and fixture), mould design, project engineering in charge, cost spread sheets, while process data includes engineering release, engineering change info rmation management, and other workflow related to the process information. Accor ding to Cornelissen et al., the contemporary PDM system should contains manageme nt functions in structure, retrieval, release, change, and workflow. In system design, development and implementation, a formal specification is nece ssary. However, there is no formal representation model for PDM system. Theref ore a graphical representation model is constructed to express the various scena rios of interactions between users and the PDM system. Statechart is then used to model the operations of PDM system, Fig.1. Statechart model bridges the curr ent gap between requirements, scenarios, and the initial design specifications o f PDM system. After properly analyzing the PDM system, a new distributed PDM (DPDM) system is proposed. Both graphical representation and statechart models are constructed f or the new DPDM system, Fig.2. New product data of DPDM and new system function s are then investigated to support product information flow in the new distribut ed environment. It is found that statecharts allow formal representations to capture the informa tion and control flows of both PDM and DPDM. In particular, statechart offers a dditional expressive power, when compared to conventional state transition diagr am, in terms of hierarchy, concurrency, history, and timing for DPDM behavioral modeling.
基金funded by the Science and Technology Project of State Grid Corporation of China(5108-202355437A-3-2-ZN).
文摘The increasing complexity of China’s electricity market creates substantial challenges for settlement automation,data consistency,and operational scalability.Existing provincial settlement systems are fragmented,lack a unified data structure,and depend heavily on manual intervention to process high-frequency and retroactive transactions.To address these limitations,a graph-based unified settlement framework is proposed to enhance automation,flexibility,and adaptability in electricity market settlements.A flexible attribute-graph model is employed to represent heterogeneousmulti-market data,enabling standardized integration,rapid querying,and seamless adaptation to evolving business requirements.An extensible operator library is designed to support configurable settlement rules,and a suite of modular tools—including dataset generation,formula configuration,billing templates,and task scheduling—facilitates end-to-end automated settlement processing.A robust refund-clearing mechanism is further incorporated,utilizing sandbox execution,data-version snapshots,dynamic lineage tracing,and real-time changecapture technologies to enable rapid and accurate recalculations under dynamic policy and data revisions.Case studies based on real-world data from regional Chinese markets validate the effectiveness of the proposed approach,demonstrating marked improvements in computational efficiency,system robustness,and automation.Moreover,enhanced settlement accuracy and high temporal granularity improve price-signal fidelity,promote cost-reflective tariffs,and incentivize energy-efficient and demand-responsive behavior among market participants.The method not only supports equitable and transparent market operations but also provides a generalizable,scalable foundation for modern electricity settlement platforms in increasingly complex and dynamic market environments.
文摘To improve the performance of the traditional map matching algorithms in freeway traffic state monitoring systems using the low logging frequency GPS （global positioning system） probe data, a map matching algorithm based on the Oracle spatial data model is proposed. The algorithm uses the Oracle road network data model to analyze the spatial relationships between massive GPS positioning points and freeway networks, builds an N-shortest path algorithm to find reasonable candidate routes between GPS positioning points efficiently, and uses the fuzzy logic inference system to determine the final matched traveling route. According to the implementation with field data from Los Angeles, the computation speed of the algorithm is about 135 GPS positioning points per second and the accuracy is 98.9%. The results demonstrate the effectiveness and accuracy of the proposed algorithm for mapping massive GPS positioning data onto freeway networks with complex geometric characteristics.
文摘An object oriented data modelling in computer aided design (CAD) databases is focused. Starting with the discussion of data modelling requirements for CAD applications, appropriate data modelling features are introduced herewith. A feasible approach to select the “best” data model for an application is to analyze the data which has to be stored in the database. A data model is appropriate for modelling a given task if the information of the application environment can be easily mapped to the data model. Thus, the involved data are analyzed and then object oriented data model appropriate for CAD applications are derived. Based on the reviewed object oriented techniques applied in CAD, object oriented data modelling in CAD is addressed in details. At last 3D geometrical data models and implementation of their data model using the object oriented method are presented.
文摘The conception of multilevel security (MLS) is commonly used in the study of data model for secure database. But there are some limitations in the basic MLS model, such as inference channels. The availability and data integrity of the system are seriously constrained by it′s 'No Read Up, No Write Down' property in the basic MLS model. In order to eliminate the covert channels, the polyinstantiation and the cover story are used in the new data model. The read and write rules have been redefined for improving the agility and usability of the system based on the MLS model. All the methods in the improved data model make the system more secure, agile and usable.
文摘A uniform metadata representation is introduced for heterogeneous databases, multi media information and other information sources. Some features about metadata are analyzed. The limitation of existing metadata model is compared with the new one. The metadata model is described in XML which is fit for metadata denotation and exchange. The well structured data, semi structured data and those exterior file data without structure are described in the metadata model. The model provides feasibility and extensibility for constructing uniform metadata model of data warehouse.
文摘In the synthesis of the control algorithm for complex systems, we are often faced with imprecise or unknown mathematical models of the dynamical systems, or even with problems in finding a mathematical model of the system in the open loop. To tackle these difficulties, an approach of data-driven model identification and control algorithm design based on the maximum stability degree criterion is proposed in this paper. The data-driven model identification procedure supposes the finding of the mathematical model of the system based on the undamped transient response of the closed-loop system. The system is approximated with the inertial model, where the coefficients are calculated based on the values of the critical transfer coefficient, oscillation amplitude and period of the underdamped response of the closed-loop system. The data driven control design supposes that the tuning parameters of the controller are calculated based on the parameters obtained from the previous step of system identification and there are presented the expressions for the calculation of the tuning parameters. The obtained results of data-driven model identification and algorithm for synthesis the controller were verified by computer simulation.
文摘This is the final of a three-part series of papers which mainly discusses the implementation issues of the CRNM. The first two papers in the series have introduced the modeling background and methodology, respectively. An overall architecture of the CRNM has been proposed in the last paper. On the basis of the above discusses, a linear reference method (LRM) for providing spatial references for location points of a trajectory is developed. A case study is introduced to illustrate the application of the CRNM for modeling a road network in the real world is given. A comprehensive conclusion is given for the series of papers.
文摘This is the second of a three-part series of papers which presents the principle and architecture of the CRNM, a trajectory-oriented, carriageway-based road network data model. The first part of the series has introduced a general background of building trajectory-oriented road network data models, including motivation, related works, and basic concepts. Based on it, this paper describs the CRNM in detail. At first, the notion of basic roadway entity is proposed and discussed. Secondly, carriageway is selected as the basic roadway entity after compared with other kinds of roadway, and approaches to representing other roadways with carriageways are introduced. At last, an overall architecture of the CRNM is proposed.
文摘This is the first of a three-part series of pape rs which introduces a general background of building trajectory-oriented road net work data models, including motivation, related works, and basic concepts. The p urpose of the series is to develop a trajectory-oriented road network data mode l, namely carriageway-based road network data model (CRNM). Part 1 deals with t he modeling background. Part 2 proposes the principle and architecture of the CR NM. Part 3 investigates the implementation of the CRNM in a case study. In the p resent paper, the challenges of managing trajectory data are discussed. Then, de veloping trajectory-oriented road network data models is proposed as a solution and existing road network data models are reviewed. Basic representation approa ches of a road network are introduced as well as its constitution.
基金Supported by the Spatial Information Engineering Key Laboratory Found of Chinese National Surveying and Mapping Bureau.(No.200722)
文摘Symbol portrayal is an important function of GIS. Sharing symbolic information in different GIS platforms is necessary for GIS applications and users. This paper discusses the necessity, possibility and solution technique of sharing a symbol library in different GIS platforms. The route map is designed as follows： first, to set up a general data model for the symbol library, then to design a standard exchange format, and finally to call on the GIS manufacturer to provide the interchange tools for their symbol library for the standard exchange format. This paper analyzes the general characteristics of GIS symbolic library, gives a symbol library model and a draft of XML schema of the symbol library exchange format.
