In this paper the influence of the differently distributed phase-randontized to the data obtained in dynamic analysis for critical value is studied.The calculation results validate that the sufficient phase-randomized...In this paper the influence of the differently distributed phase-randontized to the data obtained in dynamic analysis for critical value is studied.The calculation results validate that the sufficient phase-randomized of the different distributed random numbers are less influential on the critical value . This offers the theoretical foundation of the feasibility and practicality of the phase-randomized method.展开更多
Flexible roll forming is a promising manufacturing method for the production of variable cross section products. Considering the large plastic strain in this forming process which is much larger than that of uniform d...Flexible roll forming is a promising manufacturing method for the production of variable cross section products. Considering the large plastic strain in this forming process which is much larger than that of uniform deformation phase of uniaxial tensile test, the widely adopted method of simulating the forming processes with non-supplemented material data from uniaxial tensile test will certainly lead to large error. To reduce this error, the material data is supplemented based on three constitutive models. Then a finite element model of a six passes flexible roll forming process is established based on the supplemented material data and the original material data from the uniaxial tensile test. The flexible roll forming experiment of a B pillar reinforcing plate is carried out to verify the proposed method. Final cross section shapes of the experimental and the simulated results are compared. It is shown that the simulation calculated with supplemented material data based on Swift model agrees well with the experimental results, while the simulation based on original material data could not predict the actual deformation accurately. The results indicate that this material supplement method is reliable and indispensible, and the simulation model can well reflect the real metal forming process. Detailed analysis of the distribution and history of plastic strain at different positions are performed. A new material data supplement method is proposed to tackle the problem which is ignored in other roll forming simulations, and thus the forming process simulation accuracy can be greatly improved.展开更多
Neutral Beam Injection （NBI） is one of the most effective means for plasma heating. Experimental Data Publishing Software （EDPS） is developed to publish experimental data to get the NBI system under remote monitor...Neutral Beam Injection （NBI） is one of the most effective means for plasma heating. Experimental Data Publishing Software （EDPS） is developed to publish experimental data to get the NBI system under remote monitoring. In this paper, the architecture and implementation of EDPS including the design of the communication module and web page display module are presented. EDPS is developed based on the Browser/Server （B/S） model, and works under the Linux operating system. Using the data source and communication mechanism of the NBI Control System （NBICS）, EDPS publishes experimental data on the Internet.展开更多
In this paper, on the basis of experimental data of two kinds of chemical explosions, the piston-pushing model of spherical blast-waves and the second-order Godunov-type scheme of finite difference methods with high i...In this paper, on the basis of experimental data of two kinds of chemical explosions, the piston-pushing model of spherical blast-waves and the second-order Godunov-type scheme of finite difference methods with high identification to discontinuity are used to the numerical reconstruction of part of an actual hemispherical blast-wave flow field by properly adjusting the moving bounary conditions of a piston. This method is simple and reliable. It is suitable to the evaluation of effects of the blast-wave flow field away from the explosion center.展开更多
Experimental Design and Data Processing is an important core professional basic course for food science majors.This course is theoretical and practical,and there are many formulas,abstract contents and difficult to un...Experimental Design and Data Processing is an important core professional basic course for food science majors.This course is theoretical and practical,and there are many formulas,abstract contents and difficult to understand,and there are some problems in the teaching process,such as students1 poor interest in learning,insufficient mastery of what they have learned,and inability to combine theory with practice organically.Through analyzing the existing problems,this paper puts forward some reform measures for the teaching mode of experimental design and data processing by using the intelligent teaching of Superstar platform.展开更多
The application of computer in the quantitative analysis chemistry experiment is a chemistry experiment teaching applications software, developed by Visual Basic （6.0）, based on the content of quantitative analysis ...The application of computer in the quantitative analysis chemistry experiment is a chemistry experiment teaching applications software, developed by Visual Basic （6.0）, based on the content of quantitative analysis chemistry experiment of chemistry major in higher institute. This software has the function of the automatic processing the experimental data, the automatic generation of test report copies, and the automatic evaluation of students＇ experimental results, which solve the reliability, objectivity and accuracy problems of the students＇ experiment data processing and evaluation, and avoid interference with human factors. The software has the characteristic of the easy installation, the easy operation, the strong practicability, pertinence, the systematicness and the running stability, so it provides a platform in the quantitative analysis chemistry experiment for the students＇ assessment system of automatic processing, and it has a high popularization value. The project＇s technical route design is reasonable, the research method is correct, and the experimental data processing results are reliable, which has reached the leading domestic level in the quantitative analysis chemistry experiment teaching field of computer data processing. And this project has been through the achievements appraisal of Gansu Provincial Sci. ＆ Tech. Department.展开更多
In this paper;the dynamic characteristics of a semi-active magnetorheological fluid(MRF)engine mount are studied.To do so,the performance of the MRF engine mount is experimentally examined in higher frequencies(50~170...In this paper;the dynamic characteristics of a semi-active magnetorheological fluid(MRF)engine mount are studied.To do so,the performance of the MRF engine mount is experimentally examined in higher frequencies(50~170 Hz)and the various amplitudes(0.01~0.2 mm).In such an examination,an MRF engine mount along with its magnetically biased is fabricated and successfully measured.In addition,the natural frequencies of the system are obtained by standard hammer modal test.For modelling the behavior of the system,a mass-spring-damper model with tuned PID coefficients based on Pessen integral of absolute error method is used.The parameters of such a model including mass,damping ratio,and stiffness are identified with the help of experimental modal tests and the recursive least square method(RLS).It is shown that using PID controller leads to reducing the vibration transmissibility in the resonance frequency(=93.45 Hz)with respect to the typical passive engine mount by a factor of 58%.The average of the vibration transmissibility decreasing is also 43%within frequency bandwidth(50~170 Hz).展开更多
The simulation performance over complex building clusters of a wind simulation model（Wind Information Field Fast Analysis model, WIFFA） in a micro-scale air pollutant dispersion model system（Urban Microscale Air Po...The simulation performance over complex building clusters of a wind simulation model（Wind Information Field Fast Analysis model, WIFFA） in a micro-scale air pollutant dispersion model system（Urban Microscale Air Pollution dispersion Simulation model, UMAPS） is evaluated using various wind tunnel experimental data including the CEDVAL（Compilation of Experimental Data for Validation of Micro-Scale Dispersion Models） wind tunnel experiment data and the NJU-FZ experiment data（Nanjing University-Fang Zhuang neighborhood wind tunnel experiment data）. The results show that the wind model can reproduce the vortexes triggered by urban buildings well, and the flow patterns in urban street canyons and building clusters can also be represented. Due to the complex shapes of buildings and their distributions, the simulation deviations/discrepancies from the measurements are usually caused by the simplification of the building shapes and the determination of the key zone sizes. The computational efficiencies of different cases are also discussed in this paper. The model has a high computational efficiency compared to traditional numerical models that solve the Navier–Stokes equations, and can produce very high-resolution（1–5 m） wind fields of a complex neighborhood scale urban building canopy（～ 1 km ×1km） in less than 3 min when run on a personal computer.展开更多
A hybrid numerical-experimental approach to identify elastic modulus of a textile composite panel using vibration test data is proposed and investi- gated. Homogenization method is adopted to predict the initial value...A hybrid numerical-experimental approach to identify elastic modulus of a textile composite panel using vibration test data is proposed and investi- gated. Homogenization method is adopted to predict the initial values of elastic parameters of the composite, and parameter identification is transformed to an optimization problem in which the objective function is the minimization of the discrepancies between the experimental and numerical modal data. Case study is conducted employing a woven fabric reinforced composite panel. Three parameters （Ell, E22, G12） with higher sensitivities are selected to be identified. It is shown that the elastic parameters can be accurately identified from experimental modal data.展开更多
Although coal swelling/shrinking during coal seam gas extraction has been studied for decades,its impacts on the evolution of permeability are still not well understood.This has long been recognized,but no satisfactor...Although coal swelling/shrinking during coal seam gas extraction has been studied for decades,its impacts on the evolution of permeability are still not well understood.This has long been recognized,but no satisfactory solutions have been found.In previous studies,it is normally assumed that the matrix swelling/shrinking strain can be split between the fracture and the bulk coal and that the splitting coefficient remains unchanged during gas sorption.In this study,we defined the fracture strain as a function of permeability change ratio and back-calculated the fracture strains at different states.In the equilibrium state,the gas pressure is steady within the coal;in the non-equilibrium state,the gas pressure changes with time.For equilibrium states,the back-calculated fracture strains are extremely large and may be physically impossible in some case.For non-equilibrium states,two experiments were conducted:one for a natural coal sample and the other for a reconstructed one.For the fractured coal,the evolution of permeability is primarily controlled by the transition of coal fracture strain or permeability from local matrix swelling effect to global effect.For the reconstituted coal,the evolution of pore strain or permeability is primarily controlled by the global effect.展开更多
As global warming continues,the monitoring of changes in terrestrial water storage becomes increasingly important since it plays a critical role in understanding global change and water resource management.In North Am...As global warming continues,the monitoring of changes in terrestrial water storage becomes increasingly important since it plays a critical role in understanding global change and water resource management.In North America as elsewhere in the world,changes in water resources strongly impact agriculture and animal husbandry.From a combination of Gravity Recovery and Climate Experiment（GRACE） gravity and Global Positioning System（GPS） data,it is recently found that water storage from August,2002 to March,2011 recovered after the extreme Canadian Prairies drought between 1999 and 2005.In this paper,we use GRACE monthly gravity data of Release 5 to track the water storage change from August,2002 to June,2014.In Canadian Prairies and the Great Lakes areas,the total water storage is found to have increased during the last decade by a rate of 73.8 ± 14.5 Gt/a,which is larger than that found in the previous study due to the longer time span of GRACE observations used and the reduction of the leakage error.We also find a long term decrease of water storage at a rate of-12.0 ± 4.2 Gt/a in Ungava Peninsula,possibly due to permafrost degradation and less snow accumulation during the winter in the region.In addition,the effect of total mass gain in the surveyed area,on present-day sea level,amounts to-0.18 mm/a,and thus should be taken into account in studies of global sea level change.展开更多
The occurrence of earthquakes is closely related to the crustal geotectonic movement and the migration of mass,which consequently cause changes in gravity.The Gravity Recovery And Climate Experiment(GRACE)satellite da...The occurrence of earthquakes is closely related to the crustal geotectonic movement and the migration of mass,which consequently cause changes in gravity.The Gravity Recovery And Climate Experiment(GRACE)satellite data can be used to detect gravity changes associated with large earthquakes.However,previous GRACE satellite-based seismic gravity-change studies have focused more on coseismic gravity changes than on preseismic gravity changes.Moreover,the noise of the north–south stripe in GRACE data is difficult to eliminate,thereby resulting in the loss of some gravity information related to tectonic activities.To explore the preseismic gravity anomalies in a more refined way,we first propose a method of characterizing gravity variation based on the maximum shear strain of gravity,inspired by the concept of crustal strain.The offset index method is then adopted to describe the gravity anomalies,and the spatial and temporal characteristics of gravity anomalies before earthquakes are analyzed at the scales of the fault zone and plate,respectively.In this work,experiments are carried out on the Tibetan Plateau and its surrounding areas,and the following findings are obtained:First,from the observation scale of the fault zone,we detect the occurrence of large-area gravity anomalies near the epicenter,oftentimes about half a year before an earthquake,and these anomalies were distributed along the fault zone.Second,from the observation scale of the plate,we find that when an earthquake occurred on the Tibetan Plateau,a large number of gravity anomalies also occurred at the boundary of the Tibetan Plateau and the Indian Plate.Moreover,the aforementioned experiments confirm that the proposed method can successfully capture the preseismic gravity anomalies of large earthquakes with a magnitude of less than 8,which suggests a new idea for the application of gravity satellite data to earthquake research.展开更多
Based on the data of the third Qinghai-Tibet Plateau atmospheric science experiment from 2015 to 2017,the applicability of plateau weather systems and meteorological elements of two commonly used reanalysis data(NCEP/...Based on the data of the third Qinghai-Tibet Plateau atmospheric science experiment from 2015 to 2017,the applicability of plateau weather systems and meteorological elements of two commonly used reanalysis data(NCEP/NCAR reanalysis data set,and ERA-Interim reanalysis data set)in the plateau was evaluated.Some conclusions are obtained as follows.Compared with EC reanalysis data,NCEP reanalysis data are more consistent with the scientific experimental data.The correlation of geopotential height is above 0.99,followed by temperature;The correlation of specific humidity is the worst.Seen from average deviation,geopotential height and temperature are both lower;for EC,the westerly and southerly winds are both weaker;for NCEP,westerly wind is weaker,while southerly wind is stronger;specific humidity is higher.From the perspective of monthly and seasonal distribution characteristics,the average deviation of geopotential height is larger in spring and summer,and that of temperature is slightly worse in late spring and early summer.In terms of wind field,EC deviation is more obvious in winter,while NCEP deviation is more obvious in late spring and early summer.Seen from spatial distribution,the deviations of geological height and temperature in the north of the plateau are smaller than those in the south of the plateau.For wind field,the westerly wind in the Qaidam Basin is weaker,and the southerly wind in the southern plateau is weaker.In vertical profile,the deviation of geopotential height at high levels is greater than that of low levels.The deviation of temperature and wind field is larger near the ground.The temperature at middle levels and the westerly wind at middle and high levels are smaller,and southerly wind is stronger for NCEP.The establishment of the three sounding stations(Gaize,Shenzha and Shiquanhe)is conducive to the discovery of plateau vortex and plateau shear line in the western plateau.The western plateau vortex and plateau shear line mostly appeared in the flood season.Most plateau weather systems were maintained within 24 h,and mainly appeared and disappeared in situ.The objective recognition rate of EC for plateau weather systems is higher than NCEP,so EC is more conducive to the diagnosis and analysis of evolution characteristics of plateau weather systems.展开更多
The problems in the vehicle off-road experiment, such as various kinds of expensive instruments and diffi- culty in matching the input and the output signals of the vehicle status which cause useless data acquired. On...The problems in the vehicle off-road experiment, such as various kinds of expensive instruments and diffi- culty in matching the input and the output signals of the vehicle status which cause useless data acquired. On the basis of considering the test functions and experimental cost, this paper has developed a vehicle off-road experimental system basing on the Labview. This system can complete various kinds of signal acquisition in one experimental sys- tem and automatically restore the data by types. This solves the problem of real time matching between the input and the output signals, making sure that the data won＇t be confused as the experimental increase, so as to level the ex- perimental efficiency and data accuracy. This system has been used to the experiment of some armored vehicles. The analysis of the data has verified the reliability of the system.展开更多
The research of coupling WRF （Weather Research and Forecasting Model） with a land surface model is enhanced to explore the interaction of the atmosphere and land surface; however, regional applicability of WRF model...The research of coupling WRF （Weather Research and Forecasting Model） with a land surface model is enhanced to explore the interaction of the atmosphere and land surface; however, regional applicability of WRF model is questioned. In order to do the validation of WRF model on simulating forcing data for the Heihe River Basin, daily meteorological observation data from 15 stations of CMA （China Meteorological Administration） and hourly meteorological observation data from seven sites of WATER （Watershed Airborne Telemetry Experimental Research） are used to compare with WRF simulations, with a time range of a whole year for 2008. Results show that the average MBE （Mean Bias Error） of daily 2-m surface temperature, surface pressure, 2-m relative humidity and 10-m wind speed were -0.19 ℃, -4.49 hPa, 4.08% and 0.92 m/s, the average RMSE （Root Mean Square Error） of them were 2.11 ℃, 5.37 hPa, 9.55% and 1.73 m/s, and the average R （correlation coefficient） of them were 0.99, 0.98, 0.80 and 0.55, respectively. The average MBE of hourly 2-m surface temperature, surface pressure, 2-m relative humidity, 10-m wind speed, downward shortwave radiation and downward longwave were-0.16 ℃,-6.62 hPa,-5.14%, 0.26 m/s, 33.0 W/m^2 and-6.44 W/m^2, the average RMSE of them were 2.62 ℃, 17.10 hPa, 20.71%, 2.46 m/s, 152.9 W/m^2 and 53.5 W/m^2, and the average R of them were 0.96, 0.97, 0.70, 0.26, 0.91 and 0.60, respectively. Thus, the following conclusions were obtained： （1） regardless of daily or hourly validation, WRF model simulations of 2-m surface temperature, surface pressure and relative humidity are more reliable, especially for 2-m surface air temperature and surface pressure, the values of MBE were small and R were more than 0.96; （2） the WRF simulating downward shortwave radiation was relatively good, the average R between WRF simulation and hourly observation data was above 0.9, and the average R of downward longwave radiation was 0.6; （3） both wind speed and rainfall simulated from WRF model did not agree well with observation data.展开更多
文摘In this paper the influence of the differently distributed phase-randontized to the data obtained in dynamic analysis for critical value is studied.The calculation results validate that the sufficient phase-randomized of the different distributed random numbers are less influential on the critical value . This offers the theoretical foundation of the feasibility and practicality of the phase-randomized method.
基金Supported by National Natural Science Foundation of China(Grant Nos.51205004,51475003)Beijing Municipal Natural Science Foundation of China(Grant No.3152010)Beijing Municipal Education Committee Science and Technology Program,China(Grant No.KM201510009004)
文摘Flexible roll forming is a promising manufacturing method for the production of variable cross section products. Considering the large plastic strain in this forming process which is much larger than that of uniform deformation phase of uniaxial tensile test, the widely adopted method of simulating the forming processes with non-supplemented material data from uniaxial tensile test will certainly lead to large error. To reduce this error, the material data is supplemented based on three constitutive models. Then a finite element model of a six passes flexible roll forming process is established based on the supplemented material data and the original material data from the uniaxial tensile test. The flexible roll forming experiment of a B pillar reinforcing plate is carried out to verify the proposed method. Final cross section shapes of the experimental and the simulated results are compared. It is shown that the simulation calculated with supplemented material data based on Swift model agrees well with the experimental results, while the simulation based on original material data could not predict the actual deformation accurately. The results indicate that this material supplement method is reliable and indispensible, and the simulation model can well reflect the real metal forming process. Detailed analysis of the distribution and history of plastic strain at different positions are performed. A new material data supplement method is proposed to tackle the problem which is ignored in other roll forming simulations, and thus the forming process simulation accuracy can be greatly improved.
基金supported by the National Magnetic Confinement Fusion Science Program of China(No.2103GB101000)
文摘Neutral Beam Injection （NBI） is one of the most effective means for plasma heating. Experimental Data Publishing Software （EDPS） is developed to publish experimental data to get the NBI system under remote monitoring. In this paper, the architecture and implementation of EDPS including the design of the communication module and web page display module are presented. EDPS is developed based on the Browser/Server （B/S） model, and works under the Linux operating system. Using the data source and communication mechanism of the NBI Control System （NBICS）, EDPS publishes experimental data on the Internet.
文摘In this paper, on the basis of experimental data of two kinds of chemical explosions, the piston-pushing model of spherical blast-waves and the second-order Godunov-type scheme of finite difference methods with high identification to discontinuity are used to the numerical reconstruction of part of an actual hemispherical blast-wave flow field by properly adjusting the moving bounary conditions of a piston. This method is simple and reliable. It is suitable to the evaluation of effects of the blast-wave flow field away from the explosion center.
基金The foundation for Teaching Research Project of Hubei University of Technology in Hubei Province in 2020(grant number 2020017).
文摘Experimental Design and Data Processing is an important core professional basic course for food science majors.This course is theoretical and practical,and there are many formulas,abstract contents and difficult to understand,and there are some problems in the teaching process,such as students1 poor interest in learning,insufficient mastery of what they have learned,and inability to combine theory with practice organically.Through analyzing the existing problems,this paper puts forward some reform measures for the teaching mode of experimental design and data processing by using the intelligent teaching of Superstar platform.
文摘The application of computer in the quantitative analysis chemistry experiment is a chemistry experiment teaching applications software, developed by Visual Basic （6.0）, based on the content of quantitative analysis chemistry experiment of chemistry major in higher institute. This software has the function of the automatic processing the experimental data, the automatic generation of test report copies, and the automatic evaluation of students＇ experimental results, which solve the reliability, objectivity and accuracy problems of the students＇ experiment data processing and evaluation, and avoid interference with human factors. The software has the characteristic of the easy installation, the easy operation, the strong practicability, pertinence, the systematicness and the running stability, so it provides a platform in the quantitative analysis chemistry experiment for the students＇ assessment system of automatic processing, and it has a high popularization value. The project＇s technical route design is reasonable, the research method is correct, and the experimental data processing results are reliable, which has reached the leading domestic level in the quantitative analysis chemistry experiment teaching field of computer data processing. And this project has been through the achievements appraisal of Gansu Provincial Sci. ＆ Tech. Department.
文摘In this paper;the dynamic characteristics of a semi-active magnetorheological fluid(MRF)engine mount are studied.To do so,the performance of the MRF engine mount is experimentally examined in higher frequencies(50~170 Hz)and the various amplitudes(0.01~0.2 mm).In such an examination,an MRF engine mount along with its magnetically biased is fabricated and successfully measured.In addition,the natural frequencies of the system are obtained by standard hammer modal test.For modelling the behavior of the system,a mass-spring-damper model with tuned PID coefficients based on Pessen integral of absolute error method is used.The parameters of such a model including mass,damping ratio,and stiffness are identified with the help of experimental modal tests and the recursive least square method(RLS).It is shown that using PID controller leads to reducing the vibration transmissibility in the resonance frequency(=93.45 Hz)with respect to the typical passive engine mount by a factor of 58%.The average of the vibration transmissibility decreasing is also 43%within frequency bandwidth(50~170 Hz).
基金supported by the China Special Fund for Meteorological Research in the Public Interest(Grant No.GYHY201106049)the National Natural Science Foundation of China(Grant Nos.51538005 and 41375014)the Jiangsu Collaborative Innovation Center for Climate Change,China
文摘The simulation performance over complex building clusters of a wind simulation model（Wind Information Field Fast Analysis model, WIFFA） in a micro-scale air pollutant dispersion model system（Urban Microscale Air Pollution dispersion Simulation model, UMAPS） is evaluated using various wind tunnel experimental data including the CEDVAL（Compilation of Experimental Data for Validation of Micro-Scale Dispersion Models） wind tunnel experiment data and the NJU-FZ experiment data（Nanjing University-Fang Zhuang neighborhood wind tunnel experiment data）. The results show that the wind model can reproduce the vortexes triggered by urban buildings well, and the flow patterns in urban street canyons and building clusters can also be represented. Due to the complex shapes of buildings and their distributions, the simulation deviations/discrepancies from the measurements are usually caused by the simplification of the building shapes and the determination of the key zone sizes. The computational efficiencies of different cases are also discussed in this paper. The model has a high computational efficiency compared to traditional numerical models that solve the Navier–Stokes equations, and can produce very high-resolution（1–5 m） wind fields of a complex neighborhood scale urban building canopy（～ 1 km ×1km） in less than 3 min when run on a personal computer.
基金supported by the Program for New Century Excellent Talents in University(NCET11-0086)the National Natural Science Foundation of China(10902024)+1 种基金the Doctoral Program of Higher Education of China(20130092120039)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD-1105007001)
文摘A hybrid numerical-experimental approach to identify elastic modulus of a textile composite panel using vibration test data is proposed and investi- gated. Homogenization method is adopted to predict the initial values of elastic parameters of the composite, and parameter identification is transformed to an optimization problem in which the objective function is the minimization of the discrepancies between the experimental and numerical modal data. Case study is conducted employing a woven fabric reinforced composite panel. Three parameters （Ell, E22, G12） with higher sensitivities are selected to be identified. It is shown that the elastic parameters can be accurately identified from experimental modal data.
基金supported by the State Key Research Development Program of China(Grant No.2017YFC0804203)Key Research Program of Frontier Sciences,Chinese Academy of Sciences(Grant No.QYZDB-SSW-DQC029)the Australian Research Council under Grant DP200101293.
文摘Although coal swelling/shrinking during coal seam gas extraction has been studied for decades,its impacts on the evolution of permeability are still not well understood.This has long been recognized,but no satisfactory solutions have been found.In previous studies,it is normally assumed that the matrix swelling/shrinking strain can be split between the fracture and the bulk coal and that the splitting coefficient remains unchanged during gas sorption.In this study,we defined the fracture strain as a function of permeability change ratio and back-calculated the fracture strains at different states.In the equilibrium state,the gas pressure is steady within the coal;in the non-equilibrium state,the gas pressure changes with time.For equilibrium states,the back-calculated fracture strains are extremely large and may be physically impossible in some case.For non-equilibrium states,two experiments were conducted:one for a natural coal sample and the other for a reconstructed one.For the fractured coal,the evolution of permeability is primarily controlled by the transition of coal fracture strain or permeability from local matrix swelling effect to global effect.For the reconstituted coal,the evolution of pore strain or permeability is primarily controlled by the global effect.
基金supported by National Natural Science Foundation of China(Grant Nos.41431070,41174016,41274026,41274024,41321063)National Key Basic Research Program of China(973 Program,2012CB957703)+1 种基金CAS/SAFEA International Partnership Program for Creative Research Teams(KZZD-EW-TZ-05)The Chinese Academy of Sciences
文摘As global warming continues,the monitoring of changes in terrestrial water storage becomes increasingly important since it plays a critical role in understanding global change and water resource management.In North America as elsewhere in the world,changes in water resources strongly impact agriculture and animal husbandry.From a combination of Gravity Recovery and Climate Experiment（GRACE） gravity and Global Positioning System（GPS） data,it is recently found that water storage from August,2002 to March,2011 recovered after the extreme Canadian Prairies drought between 1999 and 2005.In this paper,we use GRACE monthly gravity data of Release 5 to track the water storage change from August,2002 to June,2014.In Canadian Prairies and the Great Lakes areas,the total water storage is found to have increased during the last decade by a rate of 73.8 ± 14.5 Gt/a,which is larger than that found in the previous study due to the longer time span of GRACE observations used and the reduction of the leakage error.We also find a long term decrease of water storage at a rate of-12.0 ± 4.2 Gt/a in Ungava Peninsula,possibly due to permafrost degradation and less snow accumulation during the winter in the region.In addition,the effect of total mass gain in the surveyed area,on present-day sea level,amounts to-0.18 mm/a,and thus should be taken into account in studies of global sea level change.
基金supported by the National Key Research and Development Program of China(Grant No.2019YFC1509202)the National Natural Science Foundation of China(Grant Nos.41772350,61371189,and 41701513).
文摘The occurrence of earthquakes is closely related to the crustal geotectonic movement and the migration of mass,which consequently cause changes in gravity.The Gravity Recovery And Climate Experiment(GRACE)satellite data can be used to detect gravity changes associated with large earthquakes.However,previous GRACE satellite-based seismic gravity-change studies have focused more on coseismic gravity changes than on preseismic gravity changes.Moreover,the noise of the north–south stripe in GRACE data is difficult to eliminate,thereby resulting in the loss of some gravity information related to tectonic activities.To explore the preseismic gravity anomalies in a more refined way,we first propose a method of characterizing gravity variation based on the maximum shear strain of gravity,inspired by the concept of crustal strain.The offset index method is then adopted to describe the gravity anomalies,and the spatial and temporal characteristics of gravity anomalies before earthquakes are analyzed at the scales of the fault zone and plate,respectively.In this work,experiments are carried out on the Tibetan Plateau and its surrounding areas,and the following findings are obtained:First,from the observation scale of the fault zone,we detect the occurrence of large-area gravity anomalies near the epicenter,oftentimes about half a year before an earthquake,and these anomalies were distributed along the fault zone.Second,from the observation scale of the plate,we find that when an earthquake occurred on the Tibetan Plateau,a large number of gravity anomalies also occurred at the boundary of the Tibetan Plateau and the Indian Plate.Moreover,the aforementioned experiments confirm that the proposed method can successfully capture the preseismic gravity anomalies of large earthquakes with a magnitude of less than 8,which suggests a new idea for the application of gravity satellite data to earthquake research.
基金Key Research and Development Program of the Ministry of Science and Technology of China(2018YFC1501705)Qinghai Science and Technology Department Project(2020-ZJ-739)Key Project of Qinghai Provincial Meteorological Bureau(QXZ2020-03).
文摘Based on the data of the third Qinghai-Tibet Plateau atmospheric science experiment from 2015 to 2017,the applicability of plateau weather systems and meteorological elements of two commonly used reanalysis data(NCEP/NCAR reanalysis data set,and ERA-Interim reanalysis data set)in the plateau was evaluated.Some conclusions are obtained as follows.Compared with EC reanalysis data,NCEP reanalysis data are more consistent with the scientific experimental data.The correlation of geopotential height is above 0.99,followed by temperature;The correlation of specific humidity is the worst.Seen from average deviation,geopotential height and temperature are both lower;for EC,the westerly and southerly winds are both weaker;for NCEP,westerly wind is weaker,while southerly wind is stronger;specific humidity is higher.From the perspective of monthly and seasonal distribution characteristics,the average deviation of geopotential height is larger in spring and summer,and that of temperature is slightly worse in late spring and early summer.In terms of wind field,EC deviation is more obvious in winter,while NCEP deviation is more obvious in late spring and early summer.Seen from spatial distribution,the deviations of geological height and temperature in the north of the plateau are smaller than those in the south of the plateau.For wind field,the westerly wind in the Qaidam Basin is weaker,and the southerly wind in the southern plateau is weaker.In vertical profile,the deviation of geopotential height at high levels is greater than that of low levels.The deviation of temperature and wind field is larger near the ground.The temperature at middle levels and the westerly wind at middle and high levels are smaller,and southerly wind is stronger for NCEP.The establishment of the three sounding stations(Gaize,Shenzha and Shiquanhe)is conducive to the discovery of plateau vortex and plateau shear line in the western plateau.The western plateau vortex and plateau shear line mostly appeared in the flood season.Most plateau weather systems were maintained within 24 h,and mainly appeared and disappeared in situ.The objective recognition rate of EC for plateau weather systems is higher than NCEP,so EC is more conducive to the diagnosis and analysis of evolution characteristics of plateau weather systems.
文摘The problems in the vehicle off-road experiment, such as various kinds of expensive instruments and diffi- culty in matching the input and the output signals of the vehicle status which cause useless data acquired. On the basis of considering the test functions and experimental cost, this paper has developed a vehicle off-road experimental system basing on the Labview. This system can complete various kinds of signal acquisition in one experimental sys- tem and automatically restore the data by types. This solves the problem of real time matching between the input and the output signals, making sure that the data won＇t be confused as the experimental increase, so as to level the ex- perimental efficiency and data accuracy. This system has been used to the experiment of some armored vehicles. The analysis of the data has verified the reliability of the system.
基金supported by grant from the National High Technology Research and Development Program (863) of China (Grant No.2009AA122104)grants from the National Natural Science Foundation of China (No.40901202, No.40925004)+1 种基金supported by the CAS Action Plan for West Development Program (Grant No.KZCX2-XB2-09)Chinese State Key Basic Research Project (Grant No.2007CB714400)
文摘The research of coupling WRF （Weather Research and Forecasting Model） with a land surface model is enhanced to explore the interaction of the atmosphere and land surface; however, regional applicability of WRF model is questioned. In order to do the validation of WRF model on simulating forcing data for the Heihe River Basin, daily meteorological observation data from 15 stations of CMA （China Meteorological Administration） and hourly meteorological observation data from seven sites of WATER （Watershed Airborne Telemetry Experimental Research） are used to compare with WRF simulations, with a time range of a whole year for 2008. Results show that the average MBE （Mean Bias Error） of daily 2-m surface temperature, surface pressure, 2-m relative humidity and 10-m wind speed were -0.19 ℃, -4.49 hPa, 4.08% and 0.92 m/s, the average RMSE （Root Mean Square Error） of them were 2.11 ℃, 5.37 hPa, 9.55% and 1.73 m/s, and the average R （correlation coefficient） of them were 0.99, 0.98, 0.80 and 0.55, respectively. The average MBE of hourly 2-m surface temperature, surface pressure, 2-m relative humidity, 10-m wind speed, downward shortwave radiation and downward longwave were-0.16 ℃,-6.62 hPa,-5.14%, 0.26 m/s, 33.0 W/m^2 and-6.44 W/m^2, the average RMSE of them were 2.62 ℃, 17.10 hPa, 20.71%, 2.46 m/s, 152.9 W/m^2 and 53.5 W/m^2, and the average R of them were 0.96, 0.97, 0.70, 0.26, 0.91 and 0.60, respectively. Thus, the following conclusions were obtained： （1） regardless of daily or hourly validation, WRF model simulations of 2-m surface temperature, surface pressure and relative humidity are more reliable, especially for 2-m surface air temperature and surface pressure, the values of MBE were small and R were more than 0.96; （2） the WRF simulating downward shortwave radiation was relatively good, the average R between WRF simulation and hourly observation data was above 0.9, and the average R of downward longwave radiation was 0.6; （3） both wind speed and rainfall simulated from WRF model did not agree well with observation data.
