Fused silica(SiO_(2)glass),a key amorphous component of Earth’s silicate minerals,undergoes coordination and phase transformations under high pressure.Although extensive studies have been conducted,discrepancies betw...Fused silica(SiO_(2)glass),a key amorphous component of Earth’s silicate minerals,undergoes coordination and phase transformations under high pressure.Although extensive studies have been conducted,discrepancies between theoretical and experimental studies remain,particularly regarding strain rate effects during compression.Here,we examine strain rate influences on the shock-induced amorphous–amorphous phase transitions in fused silica by measuring its Hugoniot equation of state and longitudinal sound velocity(CL)up to 7 GPa at strain rates of 10^(6)–10^(7)s^(-1)using a one-stage light-gas gun.A discontinuity in the relationship between shock velocity(US)and particle velocity(UP)and a significant softening in C_(L)of fused silica were observed near~5 GPa under shock loading.Our results indicate that high strain rates restrict Si–O–Si rotation in fused silica,modifying their bonds and increasing silicon coordination.The transition pressure by shock compression is significantly higher than that under static high-pressure conditions(2–3 GPa),which agrees with some recent theoretical predictions with high compression rates,reflecting the greater pressure needed to overcome energy barriers with the strain rate increase.These findings offer insights into strain rate-dependent phase transitions in fused silica and other silicate minerals(e.g.,quartz,olivine,and forsterite),bridging gaps between theoretical simulations and experiments.展开更多
The use of additive manufacturing techniques in the development of unconventional materials can help reduce the environmental impact of traditional construction materials.In this paper,the properties of a 3D-printed b...The use of additive manufacturing techniques in the development of unconventional materials can help reduce the environmental impact of traditional construction materials.In this paper,the properties of a 3D-printed biocomposite were evaluated.Biofilaments obtained by mixing pulverized bamboo fibers with polylactic acid(PLA)resin were extruded during the manufacturing process.To assess the effect of incorporating plant fibers,an analysis was conducted on the morphology,elemental chemical composition,crystallinity index,principal functional groups,thermal stability,surface roughness,microhardness,density,tensile strength,elastic modulus,and strain percentage of reinforced samples.The results were comparedwith those obtained from the characterization of standard PLAfilaments(unreinforced).The fused deposition modeling(FDM)technique was employed to print biocomposite specimens.Additionally,the influence of the printing parameters(infill density,build orientation,and layer thickness)on the physical,tribological,andmechanical properties of the biocomposites was analyzed.These results were compared with those obtained for specimens printed with pure PLA.The findings indicate that incorporating 10%vegetable filler into PLA filaments enhanced the strength and stiffness of the biocomposite under axial loads.Finally,the strength of the biocomposite subjected to axial loads was compared with the standardized values for wood-plastic composites,demonstrating the feasibility of its use for non-structural purposes in civil construction.展开更多
Transparent sand is a special material to realize visualization of concealed work in geotechnical engineering. To investigate the dynamic characteristics of transparent sand, a series of undrained cyclic simple shear ...Transparent sand is a special material to realize visualization of concealed work in geotechnical engineering. To investigate the dynamic characteristics of transparent sand, a series of undrained cyclic simple shear tests were conducted on the saturated transparent sand composed of fused quartz and refractive index-matched oil mixture. The results reveal that an increase in the initial shear stress ratio significantly affects the shape of the hysteresis loop, particularly resulting in more pronounced asymmetrical accumulation. Factors such as lower relative density, higher cyclic stress ratios and higher initial shear stress ratio have been shown to accelerate cyclic deformation, cyclic pore water pressure and stiffness degradation. The cyclic liquefaction resistance curves decrease as the initial shear stress ratio increases or as relative density decreases. Booker model and power law function model were applied to predict the pore water pressure for transparent sand. Both models yielded excellent fits for their respective condition, indicating a similar dynamic liquefaction pattern to that of natural sands. Finally, transparent sand displays similar dynamic characteristics in terms of cyclic liquefaction resistance and Kα correction factor. These comparisons indicate that transparent sand can serve as an effective means to mimic many natural sands in dynamic model tests.展开更多
Acrylonitrile–butadiene–styrene(ABS)is the main material used in fused deposition modeling(FDM),which has good toughness and strength,but the single ABS material has poor heat resistance,which tends to cause warping...Acrylonitrile–butadiene–styrene(ABS)is the main material used in fused deposition modeling(FDM),which has good toughness and strength,but the single ABS material has poor heat resistance,which tends to cause warping and deformation during the printing process.Polycarbonate(PC)exhibits good performance in heat resistance,allowing it to maintain stable performance at higher temperatures.In this work,PC was used as a blending modifier to prepare five kinds of ABS/PC composite filaments,and the mechanical and thermal properties of the ABS/PC(Acrylonitrile-butadiene-styrene/Polycarbonate)composite filaments were studied and analyzed.Results showed that the glass transition temperature(Tg)of the blend increased continuously as the PC content increased.When the mass fraction of ABS/PC was 50/50,the glass transition temperature of the blend increased by 21.21%,and the tensile strength of the composites reached 40.23 MPa,which was an increase of 36.47% compared with that of pure ABS.However,the impact strength of the composites decreased with the addition of PC.Moreover,with the increase in the mass fraction of PC,the printing accuracy error increased from 0.02 to 0.18 mm.The results of this paper will promote the improvement of ABS printing performance and enrich the available materials for FDM.展开更多
Fluorinated fused azobenzene boron(FBAz)is a novel electron-deficient building block for polymer electron acceptors in all-polymer solar cells(all-PSC).The B←N bridging units impart a fixed configuration and low-lyin...Fluorinated fused azobenzene boron(FBAz)is a novel electron-deficient building block for polymer electron acceptors in all-polymer solar cells(all-PSC).The B←N bridging units impart a fixed configuration and low-lying LUMO/HOMO energy.Three polymer acceptor materials(P2f,P3f and P5f)with different fluorine substitution positions by copolymerizing FBAz with indacenodithiophene(IDT),are synthesized and investigated to study the influence of fluorinated forms on the all-polymer solar cell performance.The FBAz units are synthesized in just three steps,facilitating the straightforward production of polymer acceptors P2f,P3f,and P5f.These acceptors exhibit strong light absorption in the visible to near-infrared range of 500-1000nm and possess suitable LUMO/HOMO energy levels of-3.99/-5.66 eV which are very complementary to that(E_(LUMO/HOMO)=-3.59/-5.20 eV)of the widely-used polymer donor poly[(ethylhexylthiophenyl)-benzodithiophene-(ethylhexyl)-thienothiophene](PTB7-Th).All-polymer solar cells(all-PSCs)with PTB7-Th as electron donor and P3f as electron acceptor exhibits highest power conversion efficiencies(PCE)2.70%.When PC_(61)BM is added as the third component,the device efficiency can reach 5.36%.These preliminary results indicate that FBAz is a promising strong electron acceptor for the development of n-type polymer semiconductors,especially in organic photovoltaics(OPVs).To the best of our knowledge,this is the first example demonstrating the unique photovoltaic properties of the N=N double bond as an acceptor material.展开更多
We demonstrate a new polarization smoothing(PS)approach utilizing residual stress birefringence in fused silica to create a spatially random polarization control plate(SRPCP),thereby improving target illumination unif...We demonstrate a new polarization smoothing(PS)approach utilizing residual stress birefringence in fused silica to create a spatially random polarization control plate(SRPCP),thereby improving target illumination uniformity in inertial confinement fusion(ICF)laser systems.The fundamental operating mechanism and key fabrication techniques for the SRPCP are systematically developed and experimentally validated.The SRPCP converts a linearly polarized 3ω incident laser beam into an output beam with a spatially randomized polarization distribution.When combined with a continuous phase plate,the SRPCP effectively suppresses high-intensity speckles at all spatial frequencies in the focal spot.The proposed PS technique is specifically designed for high-fluence large-aperture laser systems,enabling novel polarization control regimes in laser-driven ICF.展开更多
Recently, the structural fuse has become an important issue in the field of earthquake engineering. Due to the trilinearity of the pushover curve of buildings with metallic structural fuses, the mechanism of the struc...Recently, the structural fuse has become an important issue in the field of earthquake engineering. Due to the trilinearity of the pushover curve of buildings with metallic structural fuses, the mechanism of the structural fuse is investigated through the ductility equation of a single-degree-of-freedom system, and the corresponding damage-reduction spectrum is proposed to design and retrofit buildings. Furthermore, the controlling parameters, the stiffness ratio between the main frame and structural fuse and the ductility factor of the main frame, are parametrically studied, and it is shown that the structural fuse concept can be achieved by specific combinations of the controlling parameters based on the proposed damage-reduction spectrum. Finally, a design example and a retrofit example, variations of real engineering projects after the 2008 Wenchuan earthquake, are provided to demonstrate the effectiveness of the proposed design procedures using buckling restrained braces as the structural fuses.展开更多
In order to study the detonation velocity deficits of bending flexible detonating fuses,a physical model and a theoretical mathematical equation of detonation velocity deficits for bending flexible detonation fuses we...In order to study the detonation velocity deficits of bending flexible detonating fuses,a physical model and a theoretical mathematical equation of detonation velocity deficits for bending flexible detonation fuses were established based on the detonation wave＇s corner effects and delay time phenomenon by using non-dimensional analysis method.Besides,a semi-empirical formula of detonation velocity deficit for bending fuses in the same charge size was obtained through experiment and curve fitting.The result shows that an exponential relationship between the detonation velocity deficits and reciprocal of curvature radius.展开更多
Bridges designed following a conventional approach minimize the risk of collapse,but often require challenging,costly,and time-consuming restoration after an earthquake occurs.The new seismic design philosophy require...Bridges designed following a conventional approach minimize the risk of collapse,but often require challenging,costly,and time-consuming restoration after an earthquake occurs.The new seismic design philosophy requires bridges to maintain functionality even after severe earthquakes.In this context,this paper proposes a controlled rocking pile foundation(CRPF)system and numerically evaluates bridges′degree of seismic resilience.The CRPF system allows a pile cap to rock on a pile foundation and dissipate seismic energy through inelastic deformations of replaceable bar fuses that connect a pile cap and piles.Following the conceptual design of the CRPF system,two analytical models were developed for a bridge pier utilizing the CRPF system and a pier designed to develop a plastic hinge in its column.The analytical results indicate that,after experiencing a severe earthquake,a conventionally designed bridge pier sustained substantial damage in its column and exhibited significant residual displacement.In contrast,a pier using the CRPF system showed negligible residual displacement and maintained elastic behavior except,as expected,for bar fuses.The damaged fuses can be rapidly replaced to recover bridge seismic resistance following an earthquake.Therefore,the CRPF system helps to achieve the desired postearthquake performance objectives.展开更多
A new remedy is proposed in this study to increase the ductility of cross-braced frames to a level comparable with ductile moment frames.The suggested system consists of one or two concentric steel rings installed in ...A new remedy is proposed in this study to increase the ductility of cross-braced frames to a level comparable with ductile moment frames.The suggested system consists of one or two concentric steel rings installed in the cross-braced bay vertically.The steel rings are designed such that they fail in bending sooner than failure of the braces in compression.Then the rings act as seismic fuses with multiple bending plastic hinges.Using nonlinear static analysis,it is shown that the proposed system can be designed to behave like cross-braced frames with regard to stiffness and strength,and like special moment frames with regard to ductility.Seismic design factors for the proposed system are recommended based on nonlinear pushover and cyclic analysis studies.展开更多
Since powder and cotton wool may cause mechanical test fail,and the accuracy of ray detection method is not very ideal,this paper introduces the tiny capacitance detection method for broken gunpowder,in which the medi...Since powder and cotton wool may cause mechanical test fail,and the accuracy of ray detection method is not very ideal,this paper introduces the tiny capacitance detection method for broken gunpowder,in which the medium type capacitive sensor’s capacitance changes when the gunpowder core diameter changes.The detection is based on the relationship between non-electric quantity and electric quantity.Simulation results show that the designed system works well with easy installation and low power consumption.Therefore,it is suitable for broken gunpowder detection.展开更多
The longitudinal dispersion of the projectile in shooting tests of two-dimensional trajectory corrections fused with fixed canards is extremely large that it sometimes exceeds the correction ability of the correction ...The longitudinal dispersion of the projectile in shooting tests of two-dimensional trajectory corrections fused with fixed canards is extremely large that it sometimes exceeds the correction ability of the correction fuse actuator.The impact point easily deviates from the target,and thus the correction result cannot be readily evaluated.However,the cost of shooting tests is considerably high to conduct many tests for data collection.To address this issue,this study proposes an aiming method for shooting tests based on small sample size.The proposed method uses the Bootstrap method to expand the test data;repeatedly iterates and corrects the position of the simulated theoretical impact points through an improved compatibility test method;and dynamically adjusts the weight of the prior distribution of simulation results based on Kullback-Leibler divergence,which to some extent avoids the real data being"submerged"by the simulation data and achieves the fusion Bayesian estimation of the dispersion center.The experimental results show that when the simulation accuracy is sufficiently high,the proposed method yields a smaller mean-square deviation in estimating the dispersion center and higher shooting accuracy than those of the three comparison methods,which is more conducive to reflecting the effect of the control algorithm and facilitating test personnel to iterate their proposed structures and algorithms.;in addition,this study provides a knowledge base for further comprehensive studies in the future.展开更多
Shanghai Electric Porcelain Works (SEPW), a subsidiary enterprise of the SEC (Group), is specialized in manufacturing highvoltage surge arresters and fuses as main products, as well as some high-voltage insulators, wa...Shanghai Electric Porcelain Works (SEPW), a subsidiary enterprise of the SEC (Group), is specialized in manufacturing highvoltage surge arresters and fuses as main products, as well as some high-voltage insulators, wall bushings and disconnecting switches for power transmission & distribution systems. In fact, SEPW is展开更多
Near-infrared(NIR)responsive compounds with narrow bandgaps play a crucial role in enhancing the photovoltaic efficiency of organic solar cells(OSCs)by effectively capturing high-energy NIR photons,as well as improvin...Near-infrared(NIR)responsive compounds with narrow bandgaps play a crucial role in enhancing the photovoltaic efficiency of organic solar cells(OSCs)by effectively capturing high-energy NIR photons,as well as improving the NIR sensitivity of organic photodetectors(OPDs)through NIR light detection[1,2].The design principle based on electron-donating and accepting(D−A)structures has led to the development of numerous A−D−A or A−DA’D−A type NIR responsive molecules,such as ITIC and Y6.展开更多
A numerical model based on measured fictive temperature distributions is explored to evaluate the residual stress fields of CO_(2)laser-annealed mitigated fused silica damage sites.The proposed model extracts the resi...A numerical model based on measured fictive temperature distributions is explored to evaluate the residual stress fields of CO_(2)laser-annealed mitigated fused silica damage sites.The proposed model extracts the residual strain from the differences in thermoelastic contraction of fused silica with different fictive temperatures from the initial frozen-in temperatures to ambient temperature.The residual stress fields of mitigated damage sites for the CO_(2)laser-annealed case are obtained by a finite element analysis of equilibrium equations and constitutive equations.The simulated results indicate that the proposed model can accurately evaluate the residual stress fields of laser-annealed mitigated damage sites with a complex thermal history.The calculated maximum hoop stress is in good agreement with the reported experimental result.The estimated optical retardance profiles from the calculated radial and hoop stress fields are consistent with the photoelastic measurements.These results provide sufficient evidence to demonstrate the suitability of the proposed model for describing the residual stresses of mitigated fused silica damage sites after CO_(2)laser annealing.展开更多
Additive manufacturing(AM),also known as 3D printing,is a process of creating three-dimensional objects with complex geometries that is utilized in various engineering applications.Continuous carbon fiber(CCF)is a hig...Additive manufacturing(AM),also known as 3D printing,is a process of creating three-dimensional objects with complex geometries that is utilized in various engineering applications.Continuous carbon fiber(CCF)is a high-performance material that offers a range of benefits in terms of strength,weight,and durability.Fused filament fabrication(FFF)is a type of AM that uses a thermoplastic filament as a material with which to create a three-dimensional object,and it has been widely used in various applications,as it enables the faster,cheaper,and more customizable production of parts and products.Lightweight cellular composite structures consists of small,repeating unit cells that are interconnected to form a larger structure,and they are employed in high engineering applications.In this study,cellular composite structures were fabricated using FFF technology,considering two types of infill paths design(grid and triangular)manufactured at three infill density levels(20%,40%,and 60%).After the fabrication process,tensile and flexural properties were experimentally investigated,and the influence of the infill pattern and density on the cellular composite parts were studied.The achieved results demonstrated that the infill design pattern and its density had great influence on the mechanical properties of the cellular structure.The obtained results also showed that the lightweight cellular composite parts had great potential for use in structural applications.展开更多
From the standpoint of chemical structures,the organic backbones of energetic materials can be classified into aromatic rings,nonaromatic rings,and open chains.Although the category of aromatic energetic compounds exh...From the standpoint of chemical structures,the organic backbones of energetic materials can be classified into aromatic rings,nonaromatic rings,and open chains.Although the category of aromatic energetic compounds exhibits several advantages in the regulation of energetic properties,the nonaromatic heterocycles,assembling nitramino explosophores with simple alkyl bridges,still have prevailed in benchmark materials.The methylene bridge plays a pivotal role in the constructions of the classic nonaromatic heterocycle-based energetic compounds,e.g.,hexahydro-1,3,5-trinitro-1,3,5-triazine(RDX)and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine(HMX),whereas ethylene bridge is the core moiety of state-of-the-art explosive 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane(CL-20).In this context,it is of great interest to employ simple and practical bridges to assemble aromatic and nonaromatic nitrogen-rich heterocycles,thereby expanding the structural diversity of energetic materials,e.g.,bridged and fused nitrogen-rich poly-heterocycles.Furthermore,alkyl-bridged poly-heterocycles highlight the potential for the open chain type of energetic materials.In this review,the development of alkyl bridges in linking nitrogen-rich heterocycles is presented,and the perspective of the newly constructed energetic backbones is summarized for the future design of advanced energetic materials.展开更多
Para-quinols(p-quinols)are a kind of cyclohexa-2,5-dienones,and are widely used as active synthons in organic synthesis,medicinal chemistry and materials science.Herein,the efficient synthesis of poly-substituted aren...Para-quinols(p-quinols)are a kind of cyclohexa-2,5-dienones,and are widely used as active synthons in organic synthesis,medicinal chemistry and materials science.Herein,the efficient synthesis of poly-substituted arenes and fused cyclic compounds from p-quinols has been summarized.The mecha-nisms and the key driving force of these efficient transformations have been discussed.展开更多
In Fused Filament Fabrication(FFF),the state of material flow significantly influences printing outcomes.However,online monitoring of these micro-physical processes within the extruder remains challenging.The flow sta...In Fused Filament Fabrication(FFF),the state of material flow significantly influences printing outcomes.However,online monitoring of these micro-physical processes within the extruder remains challenging.The flow state is affected by multiple parameters,with temperature and volumetric flow rate(VFR)being the most critical.The study explores the stable extrusion of flow with a highly sensitive acoustic emission(AE)sensor so that AE signals generated by the friction in the annular region can reflect the flow state more effectively.Nevertheless,the large volume and broad frequency range of the data present processing challenges.This study proposes a method that initially selects short impact signals and then uses the Fast Kurtogram(FK)to identify the frequency with the highest kurtosis for signal filtration.The results indicate that this approach significantly enhances processing speed and improves feature extraction capabilities.By correlating AE characteristics under various parameters with the quality of extruded raster beads,AE can monitor the real-time state of material flow.This study offers a concise and efficient method for monitoring the state of raster beads and demonstrates the potential of online monitoring of the flow states.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.42422201,12175211,and 12350710177)the Sichuan Science and Technology Program(Grant No.2023NSFSC1910).
文摘Fused silica(SiO_(2)glass),a key amorphous component of Earth’s silicate minerals,undergoes coordination and phase transformations under high pressure.Although extensive studies have been conducted,discrepancies between theoretical and experimental studies remain,particularly regarding strain rate effects during compression.Here,we examine strain rate influences on the shock-induced amorphous–amorphous phase transitions in fused silica by measuring its Hugoniot equation of state and longitudinal sound velocity(CL)up to 7 GPa at strain rates of 10^(6)–10^(7)s^(-1)using a one-stage light-gas gun.A discontinuity in the relationship between shock velocity(US)and particle velocity(UP)and a significant softening in C_(L)of fused silica were observed near~5 GPa under shock loading.Our results indicate that high strain rates restrict Si–O–Si rotation in fused silica,modifying their bonds and increasing silicon coordination.The transition pressure by shock compression is significantly higher than that under static high-pressure conditions(2–3 GPa),which agrees with some recent theoretical predictions with high compression rates,reflecting the greater pressure needed to overcome energy barriers with the strain rate increase.These findings offer insights into strain rate-dependent phase transitions in fused silica and other silicate minerals(e.g.,quartz,olivine,and forsterite),bridging gaps between theoretical simulations and experiments.
基金a derivative product of the project INV-ING-3788 financed by the Vicerectory of Research of the Universidad Militar Nueva Granada,validity 2023.
文摘The use of additive manufacturing techniques in the development of unconventional materials can help reduce the environmental impact of traditional construction materials.In this paper,the properties of a 3D-printed biocomposite were evaluated.Biofilaments obtained by mixing pulverized bamboo fibers with polylactic acid(PLA)resin were extruded during the manufacturing process.To assess the effect of incorporating plant fibers,an analysis was conducted on the morphology,elemental chemical composition,crystallinity index,principal functional groups,thermal stability,surface roughness,microhardness,density,tensile strength,elastic modulus,and strain percentage of reinforced samples.The results were comparedwith those obtained from the characterization of standard PLAfilaments(unreinforced).The fused deposition modeling(FDM)technique was employed to print biocomposite specimens.Additionally,the influence of the printing parameters(infill density,build orientation,and layer thickness)on the physical,tribological,andmechanical properties of the biocomposites was analyzed.These results were compared with those obtained for specimens printed with pure PLA.The findings indicate that incorporating 10%vegetable filler into PLA filaments enhanced the strength and stiffness of the biocomposite under axial loads.Finally,the strength of the biocomposite subjected to axial loads was compared with the standardized values for wood-plastic composites,demonstrating the feasibility of its use for non-structural purposes in civil construction.
基金Project(U2268213) supported by the National Natural Science Foundation of ChinaProject(2024YFHZ0121) supported by the Sichuan Science and Technology Program,China。
文摘Transparent sand is a special material to realize visualization of concealed work in geotechnical engineering. To investigate the dynamic characteristics of transparent sand, a series of undrained cyclic simple shear tests were conducted on the saturated transparent sand composed of fused quartz and refractive index-matched oil mixture. The results reveal that an increase in the initial shear stress ratio significantly affects the shape of the hysteresis loop, particularly resulting in more pronounced asymmetrical accumulation. Factors such as lower relative density, higher cyclic stress ratios and higher initial shear stress ratio have been shown to accelerate cyclic deformation, cyclic pore water pressure and stiffness degradation. The cyclic liquefaction resistance curves decrease as the initial shear stress ratio increases or as relative density decreases. Booker model and power law function model were applied to predict the pore water pressure for transparent sand. Both models yielded excellent fits for their respective condition, indicating a similar dynamic liquefaction pattern to that of natural sands. Finally, transparent sand displays similar dynamic characteristics in terms of cyclic liquefaction resistance and Kα correction factor. These comparisons indicate that transparent sand can serve as an effective means to mimic many natural sands in dynamic model tests.
基金the Natural Science Foundation of Shandong Province(grant no.ZR2020KF024)Yantai City Science and Technology Plan Project(grant no.2022ZDCX016)+1 种基金the University Research Project of Shandong Province(grant no.J17KB007)Natural Science Foundation of Shandong Jiaotong University(grant no.Z201937).
文摘Acrylonitrile–butadiene–styrene(ABS)is the main material used in fused deposition modeling(FDM),which has good toughness and strength,but the single ABS material has poor heat resistance,which tends to cause warping and deformation during the printing process.Polycarbonate(PC)exhibits good performance in heat resistance,allowing it to maintain stable performance at higher temperatures.In this work,PC was used as a blending modifier to prepare five kinds of ABS/PC composite filaments,and the mechanical and thermal properties of the ABS/PC(Acrylonitrile-butadiene-styrene/Polycarbonate)composite filaments were studied and analyzed.Results showed that the glass transition temperature(Tg)of the blend increased continuously as the PC content increased.When the mass fraction of ABS/PC was 50/50,the glass transition temperature of the blend increased by 21.21%,and the tensile strength of the composites reached 40.23 MPa,which was an increase of 36.47% compared with that of pure ABS.However,the impact strength of the composites decreased with the addition of PC.Moreover,with the increase in the mass fraction of PC,the printing accuracy error increased from 0.02 to 0.18 mm.The results of this paper will promote the improvement of ABS printing performance and enrich the available materials for FDM.
基金supported by the National Natural Science Foundation of China(No.22375123)the Shuguang Program of Shanghai Education Development Foundation,the Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(No.2022SXTD012)。
文摘Fluorinated fused azobenzene boron(FBAz)is a novel electron-deficient building block for polymer electron acceptors in all-polymer solar cells(all-PSC).The B←N bridging units impart a fixed configuration and low-lying LUMO/HOMO energy.Three polymer acceptor materials(P2f,P3f and P5f)with different fluorine substitution positions by copolymerizing FBAz with indacenodithiophene(IDT),are synthesized and investigated to study the influence of fluorinated forms on the all-polymer solar cell performance.The FBAz units are synthesized in just three steps,facilitating the straightforward production of polymer acceptors P2f,P3f,and P5f.These acceptors exhibit strong light absorption in the visible to near-infrared range of 500-1000nm and possess suitable LUMO/HOMO energy levels of-3.99/-5.66 eV which are very complementary to that(E_(LUMO/HOMO)=-3.59/-5.20 eV)of the widely-used polymer donor poly[(ethylhexylthiophenyl)-benzodithiophene-(ethylhexyl)-thienothiophene](PTB7-Th).All-polymer solar cells(all-PSCs)with PTB7-Th as electron donor and P3f as electron acceptor exhibits highest power conversion efficiencies(PCE)2.70%.When PC_(61)BM is added as the third component,the device efficiency can reach 5.36%.These preliminary results indicate that FBAz is a promising strong electron acceptor for the development of n-type polymer semiconductors,especially in organic photovoltaics(OPVs).To the best of our knowledge,this is the first example demonstrating the unique photovoltaic properties of the N=N double bond as an acceptor material.
基金supported by the National Natural Science Foundation of China(Grant No.62275235).
文摘We demonstrate a new polarization smoothing(PS)approach utilizing residual stress birefringence in fused silica to create a spatially random polarization control plate(SRPCP),thereby improving target illumination uniformity in inertial confinement fusion(ICF)laser systems.The fundamental operating mechanism and key fabrication techniques for the SRPCP are systematically developed and experimentally validated.The SRPCP converts a linearly polarized 3ω incident laser beam into an output beam with a spatially randomized polarization distribution.When combined with a continuous phase plate,the SRPCP effectively suppresses high-intensity speckles at all spatial frequencies in the focal spot.The proposed PS technique is specifically designed for high-fluence large-aperture laser systems,enabling novel polarization control regimes in laser-driven ICF.
基金National Natural Science Foundation of China under Grant Nos.11372061 and 91315301
文摘Recently, the structural fuse has become an important issue in the field of earthquake engineering. Due to the trilinearity of the pushover curve of buildings with metallic structural fuses, the mechanism of the structural fuse is investigated through the ductility equation of a single-degree-of-freedom system, and the corresponding damage-reduction spectrum is proposed to design and retrofit buildings. Furthermore, the controlling parameters, the stiffness ratio between the main frame and structural fuse and the ductility factor of the main frame, are parametrically studied, and it is shown that the structural fuse concept can be achieved by specific combinations of the controlling parameters based on the proposed damage-reduction spectrum. Finally, a design example and a retrofit example, variations of real engineering projects after the 2008 Wenchuan earthquake, are provided to demonstrate the effectiveness of the proposed design procedures using buckling restrained braces as the structural fuses.
基金Supported by the Foundation of State Key Laboratory of Explosion Science and Technology(YBKT10-04)
文摘In order to study the detonation velocity deficits of bending flexible detonating fuses,a physical model and a theoretical mathematical equation of detonation velocity deficits for bending flexible detonation fuses were established based on the detonation wave＇s corner effects and delay time phenomenon by using non-dimensional analysis method.Besides,a semi-empirical formula of detonation velocity deficit for bending fuses in the same charge size was obtained through experiment and curve fitting.The result shows that an exponential relationship between the detonation velocity deficits and reciprocal of curvature radius.
基金Supported by:National Natural Science Foundation of China under Grant Nos.52008092,U1934205,51908123the China Postdoctoral Science Foundation under Grant No.2021M690034+1 种基金the International Postdoctoral Exchange Fellowship Program of Chinathe Zhishan Postdoctoral Fellowship Program。
文摘Bridges designed following a conventional approach minimize the risk of collapse,but often require challenging,costly,and time-consuming restoration after an earthquake occurs.The new seismic design philosophy requires bridges to maintain functionality even after severe earthquakes.In this context,this paper proposes a controlled rocking pile foundation(CRPF)system and numerically evaluates bridges′degree of seismic resilience.The CRPF system allows a pile cap to rock on a pile foundation and dissipate seismic energy through inelastic deformations of replaceable bar fuses that connect a pile cap and piles.Following the conceptual design of the CRPF system,two analytical models were developed for a bridge pier utilizing the CRPF system and a pier designed to develop a plastic hinge in its column.The analytical results indicate that,after experiencing a severe earthquake,a conventionally designed bridge pier sustained substantial damage in its column and exhibited significant residual displacement.In contrast,a pier using the CRPF system showed negligible residual displacement and maintained elastic behavior except,as expected,for bar fuses.The damaged fuses can be rapidly replaced to recover bridge seismic resistance following an earthquake.Therefore,the CRPF system helps to achieve the desired postearthquake performance objectives.
文摘A new remedy is proposed in this study to increase the ductility of cross-braced frames to a level comparable with ductile moment frames.The suggested system consists of one or two concentric steel rings installed in the cross-braced bay vertically.The steel rings are designed such that they fail in bending sooner than failure of the braces in compression.Then the rings act as seismic fuses with multiple bending plastic hinges.Using nonlinear static analysis,it is shown that the proposed system can be designed to behave like cross-braced frames with regard to stiffness and strength,and like special moment frames with regard to ductility.Seismic design factors for the proposed system are recommended based on nonlinear pushover and cyclic analysis studies.
基金National Natural Science Foundation of China(No.6171177)
文摘Since powder and cotton wool may cause mechanical test fail,and the accuracy of ray detection method is not very ideal,this paper introduces the tiny capacitance detection method for broken gunpowder,in which the medium type capacitive sensor’s capacitance changes when the gunpowder core diameter changes.The detection is based on the relationship between non-electric quantity and electric quantity.Simulation results show that the designed system works well with easy installation and low power consumption.Therefore,it is suitable for broken gunpowder detection.
基金the National Natural Science Foundation of China(Grant No.61973033)Preliminary Research of Equipment(Grant No.9090102010305)for funding the experiments。
文摘The longitudinal dispersion of the projectile in shooting tests of two-dimensional trajectory corrections fused with fixed canards is extremely large that it sometimes exceeds the correction ability of the correction fuse actuator.The impact point easily deviates from the target,and thus the correction result cannot be readily evaluated.However,the cost of shooting tests is considerably high to conduct many tests for data collection.To address this issue,this study proposes an aiming method for shooting tests based on small sample size.The proposed method uses the Bootstrap method to expand the test data;repeatedly iterates and corrects the position of the simulated theoretical impact points through an improved compatibility test method;and dynamically adjusts the weight of the prior distribution of simulation results based on Kullback-Leibler divergence,which to some extent avoids the real data being"submerged"by the simulation data and achieves the fusion Bayesian estimation of the dispersion center.The experimental results show that when the simulation accuracy is sufficiently high,the proposed method yields a smaller mean-square deviation in estimating the dispersion center and higher shooting accuracy than those of the three comparison methods,which is more conducive to reflecting the effect of the control algorithm and facilitating test personnel to iterate their proposed structures and algorithms.;in addition,this study provides a knowledge base for further comprehensive studies in the future.
文摘Shanghai Electric Porcelain Works (SEPW), a subsidiary enterprise of the SEC (Group), is specialized in manufacturing highvoltage surge arresters and fuses as main products, as well as some high-voltage insulators, wall bushings and disconnecting switches for power transmission & distribution systems. In fact, SEPW is
基金supported by the National Natural Science Foundation of China (52263019)the Yunnan Fundamental Research Projects (202301AT070313).
文摘Near-infrared(NIR)responsive compounds with narrow bandgaps play a crucial role in enhancing the photovoltaic efficiency of organic solar cells(OSCs)by effectively capturing high-energy NIR photons,as well as improving the NIR sensitivity of organic photodetectors(OPDs)through NIR light detection[1,2].The design principle based on electron-donating and accepting(D−A)structures has led to the development of numerous A−D−A or A−DA’D−A type NIR responsive molecules,such as ITIC and Y6.
基金Project supported by the National Natural Science Foundation of China(Grant No.62275235).
文摘A numerical model based on measured fictive temperature distributions is explored to evaluate the residual stress fields of CO_(2)laser-annealed mitigated fused silica damage sites.The proposed model extracts the residual strain from the differences in thermoelastic contraction of fused silica with different fictive temperatures from the initial frozen-in temperatures to ambient temperature.The residual stress fields of mitigated damage sites for the CO_(2)laser-annealed case are obtained by a finite element analysis of equilibrium equations and constitutive equations.The simulated results indicate that the proposed model can accurately evaluate the residual stress fields of laser-annealed mitigated damage sites with a complex thermal history.The calculated maximum hoop stress is in good agreement with the reported experimental result.The estimated optical retardance profiles from the calculated radial and hoop stress fields are consistent with the photoelastic measurements.These results provide sufficient evidence to demonstrate the suitability of the proposed model for describing the residual stresses of mitigated fused silica damage sites after CO_(2)laser annealing.
文摘Additive manufacturing(AM),also known as 3D printing,is a process of creating three-dimensional objects with complex geometries that is utilized in various engineering applications.Continuous carbon fiber(CCF)is a high-performance material that offers a range of benefits in terms of strength,weight,and durability.Fused filament fabrication(FFF)is a type of AM that uses a thermoplastic filament as a material with which to create a three-dimensional object,and it has been widely used in various applications,as it enables the faster,cheaper,and more customizable production of parts and products.Lightweight cellular composite structures consists of small,repeating unit cells that are interconnected to form a larger structure,and they are employed in high engineering applications.In this study,cellular composite structures were fabricated using FFF technology,considering two types of infill paths design(grid and triangular)manufactured at three infill density levels(20%,40%,and 60%).After the fabrication process,tensile and flexural properties were experimentally investigated,and the influence of the infill pattern and density on the cellular composite parts were studied.The achieved results demonstrated that the infill design pattern and its density had great influence on the mechanical properties of the cellular structure.The obtained results also showed that the lightweight cellular composite parts had great potential for use in structural applications.
基金National Natural Science Foundation of China(Grant Nos.22075023,22205022,and 22235003)to provide fund for conducting experiments。
文摘From the standpoint of chemical structures,the organic backbones of energetic materials can be classified into aromatic rings,nonaromatic rings,and open chains.Although the category of aromatic energetic compounds exhibits several advantages in the regulation of energetic properties,the nonaromatic heterocycles,assembling nitramino explosophores with simple alkyl bridges,still have prevailed in benchmark materials.The methylene bridge plays a pivotal role in the constructions of the classic nonaromatic heterocycle-based energetic compounds,e.g.,hexahydro-1,3,5-trinitro-1,3,5-triazine(RDX)and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine(HMX),whereas ethylene bridge is the core moiety of state-of-the-art explosive 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane(CL-20).In this context,it is of great interest to employ simple and practical bridges to assemble aromatic and nonaromatic nitrogen-rich heterocycles,thereby expanding the structural diversity of energetic materials,e.g.,bridged and fused nitrogen-rich poly-heterocycles.Furthermore,alkyl-bridged poly-heterocycles highlight the potential for the open chain type of energetic materials.In this review,the development of alkyl bridges in linking nitrogen-rich heterocycles is presented,and the perspective of the newly constructed energetic backbones is summarized for the future design of advanced energetic materials.
基金supported by the Department of Science and Technology of Jilin Province(20220402046GH,20220101066JC).
文摘Para-quinols(p-quinols)are a kind of cyclohexa-2,5-dienones,and are widely used as active synthons in organic synthesis,medicinal chemistry and materials science.Herein,the efficient synthesis of poly-substituted arenes and fused cyclic compounds from p-quinols has been summarized.The mecha-nisms and the key driving force of these efficient transformations have been discussed.
文摘In Fused Filament Fabrication(FFF),the state of material flow significantly influences printing outcomes.However,online monitoring of these micro-physical processes within the extruder remains challenging.The flow state is affected by multiple parameters,with temperature and volumetric flow rate(VFR)being the most critical.The study explores the stable extrusion of flow with a highly sensitive acoustic emission(AE)sensor so that AE signals generated by the friction in the annular region can reflect the flow state more effectively.Nevertheless,the large volume and broad frequency range of the data present processing challenges.This study proposes a method that initially selects short impact signals and then uses the Fast Kurtogram(FK)to identify the frequency with the highest kurtosis for signal filtration.The results indicate that this approach significantly enhances processing speed and improves feature extraction capabilities.By correlating AE characteristics under various parameters with the quality of extruded raster beads,AE can monitor the real-time state of material flow.This study offers a concise and efficient method for monitoring the state of raster beads and demonstrates the potential of online monitoring of the flow states.
