A plasmonics waveguide structure that consist of a non-through metal–insulator–metal(MIM)waveguide coupled with a D-shaped cavity was designed.And the transmission properties,magnetic field distribution,and refracti...A plasmonics waveguide structure that consist of a non-through metal–insulator–metal(MIM)waveguide coupled with a D-shaped cavity was designed.And the transmission properties,magnetic field distribution,and refractive index sensing functionality were simulated using the finite element method(FEM).A multi-Fano resonance phenomenon was clearly observable in the transmission spectra.The Fano resonances observed in the proposed structure arise from the interaction between the discrete states of the Dshaped resonant cavity and the continuum state of the non-through MIM waveguide.The influence of structural parameters on Fano resonance modulation was investigated through systematic parameter adjustments.Additionally,the refractive index sensing properties,based on the Fano resonance,were investigated by varying the refractive index of the MIM waveguide's insulator layer.A maximum sensitivity and FOM of 1155 RIU/nm and 40 were achieved,respectively.This research opens up new possibilities for designing and exploring high-sensitivity photonic devices,micro-sensors,and innovative on-chip sensing architectures for future applications.展开更多
To investigate the failure process and characteristics of D-shaped tunnels under different maximum principal stress directions θ, true-triaxial tests were conducted on cubic sandstone samples with a through D-shaped ...To investigate the failure process and characteristics of D-shaped tunnels under different maximum principal stress directions θ, true-triaxial tests were conducted on cubic sandstone samples with a through D-shaped hole. The test results show that the failure process can be divided into 4 periods:calm, buckling deformation, gradual buckling and exfoliation of rock fragment, and formation of a Vshaped notch. With an increase in θ from 0° to 90°, the size of the rock fragments first decreases and then increases, whereas the fractal dimension of the rock fragments first increases and then decreases. Meanwhile, the failure position at the left side shifts from the sidewall to the corner and finally to the floor, whereas the failure position at the right side moves from the sidewall to the spandrel and finally to the roof, which is consistent with the failure position in underground engineering. In addition, the initial vertical failure stress first decreases and then increases. By comparing the results,the failure severities at different maximum principal stress directions can be ranked from high to low in the following order: 90°>60°>30°>45°>0°.展开更多
With the technical development of new warhead designs and improvised explosive device protection,irregular casing filled with explosive has been paid more attention recently. In this paper, we studied the fragmentatio...With the technical development of new warhead designs and improvised explosive device protection,irregular casing filled with explosive has been paid more attention recently. In this paper, we studied the fragmentation of a type of D-shaped casing, which is a common asymmetric casing in the field of warhead design. Based on the radiograph technique, static explosive experiments were conducted with D-shaped casings under four different eccentric initiation ratios to explore their fragmentation. A numerical model was then established to simulate the dynamic response of D-shaped casing filled with explosive. The results of numerical simulation were found to agree well with the experimental data.According to the results of numerical simulation and experimental data, the dynamic responses of Dshaped casing were analyzed. The results of the current work pave way for the innovative design of new warhead and for further studying the dynamic response of asymmetric casing.展开更多
Open-loop flow control method was used to affect the development of a turbulent wake behind a D-shaped bluff body. Loud speakers were embedded inside the bluff body to produce two zero-net-mass- flux jets through 2 mm...Open-loop flow control method was used to affect the development of a turbulent wake behind a D-shaped bluff body. Loud speakers were embedded inside the bluff body to produce two zero-net-mass- flux jets through 2 mm-wide span-wise slots located along the upper and lower edges on the rear wall. The drag forces for different actuation amplitudes （Cμ, the ratio between the momentum of the actuating jets and the moment deficit caused by the bluff body） and frequencies （StA） were examined. The effects of the phase difference in the two jets （0 and π） were also studied. It was found that when Cμ was 0.1%, a drag reduction up to 5% was achieved when the velocities of the two jets varied in phase at a frequency of 5tA = 0.16. When the velocities of the two jets varied π out of phase, significant drag increase was observed.展开更多
A high sensitivity D-shaped hole double-cladding fiber temperature sensor based on surface plasmon resonance(SPR)is designed and investigated by a full-vector finite element method.Within the D-shaped hole doublecladd...A high sensitivity D-shaped hole double-cladding fiber temperature sensor based on surface plasmon resonance(SPR)is designed and investigated by a full-vector finite element method.Within the D-shaped hole doublecladding fiber,the hollow D-section is coated with gold film and then injected in a high thermo-optic coefficient liquid to realize the high temperature sensitivity for the fiber SPR temperature sensor.The numerical simulation results show that the peaking loss of the D-shaped hole double-cladding fiber SPR is hugely influenced by the distance between the D-shaped hole and fiber core and by the thickness of the gold film,but the temperature sensitivity is almost insensitive to the above parameters.When the thermo-optic coefficient is -2.8×10^(-4)∕℃,the thickness of the gold film is 47 nm,and the distance between the D-shaped hole and fiber core is 5μm,the temperature sensitivity of the D-shaped hole fiber SPR sensor can reach to -3.635 nm∕℃.展开更多
A new D-shaped tellurite photonic crystal fiber sensor based on the four-wave mixing(FWM)effect with the surface plasmon resonance(SPR)effect is designed and optimized.The substrate of the D-shaped photonic crystal fi...A new D-shaped tellurite photonic crystal fiber sensor based on the four-wave mixing(FWM)effect with the surface plasmon resonance(SPR)effect is designed and optimized.The substrate of the D-shaped photonic crystal fiber(D-PCF)is tellurite glass,and the polished surface is plated with the gold film and hydrogen gas-sensitive film.An air hole of the inner cladding,which is plated with the gold film and methane gas-sensitive film,is selected as the second sensing channel to simultaneously measure the concentration of hydrogen and methane.Based on the four-wave mixing,the wavelength shifts of the Stokes and anti-Stokes spectra resulting from the variation of the gas concentration can be used to accurately detect the concentrations of methane and hydrogen.Meanwhile,it is found that the SPR effect can increase the wavelength shifts,which means the sensitivity of methane and hydrogen augment.After parameter optimization,the maximum sensitivities of methane and hydrogen are 4.03 nm/%and-14.19 nm/%,respectively.Both the linearities are up to 99.9%.The resolution of methane is 1.25×10^(-2)%and hydrogen is 7.14×10^(-3)%.Moreover,the fiber length of this sensor is only 20mm,which is conducive to the construction of a compact or ultra-compact embedded FWM fiber sensor.展开更多
Utilizing finite element analysis,the ballistic protection provided by a combination of perforated D-shaped and base armor plates,collectively referred to as radiator armor,is evaluated.ANSYS Explicit Dynamics is empl...Utilizing finite element analysis,the ballistic protection provided by a combination of perforated D-shaped and base armor plates,collectively referred to as radiator armor,is evaluated.ANSYS Explicit Dynamics is employed to simulate the ballistic impact of 7.62 mm armor-piercing projectiles on Aluminum AA5083-H116 and Steel Secure 500 armors,focusing on the evaluation of material deformation and penetration resistance at varying impact points.While the D-shaped armor plate is penetrated by the armor-piercing projectiles,the combination of the perforated D-shaped and base armor plates successfully halts penetration.A numerical model based on the finite element method is developed using software such as SolidWorks and ANSYS to analyze the interaction between radiator armor and bullet.The perforated design of radiator armor is to maintain airflow for radiator function,with hole sizes smaller than the bullet core diameter to protect radiator assemblies.Predictions are made regarding the brittle fracture resulting from the projectile core′s bending due to asymmetric impact,and the resulting fragments failed to penetrate the perforated base armor plate.Craters are formed on the surface of the perforated D-shaped armor plate due to the impact of projectile fragments.The numerical model accurately predicts hole growth and projectile penetration upon impact with the armor,demonstrating effective protection of the radiator assemblies by the radiator armor.展开更多
A stable Q-switched erbium doped fiber laser emitting at 1558 nm is demonstrated using a cadmium selenide（CdSe） material coated onto a side-polished D-shape fiber as the saturable absorber（SA）. By elevating the in...A stable Q-switched erbium doped fiber laser emitting at 1558 nm is demonstrated using a cadmium selenide（CdSe） material coated onto a side-polished D-shape fiber as the saturable absorber（SA）. By elevating the input pump power from the threshold of 91 mW to the maximum available power of 136 mW, a pulse train with a maximum repetition rate of 57.44 kHz, minimum pulse width of 3.76 us, maximum average output power of7.99 mW, maximum pulse energy of 0.1391 uJ, and maximum peak power of 36.99 mW are obtained. The signalto-noise ratio of the spectrum is measured to be around 75 dB. This CdSe based SA is simple, robust, and reliable,and thus suitable for making a portable pulse laser source.展开更多
A simulation on the propagation of lower hybrid wave in EAST is conducted. Ray tracing, evolution of the parallel refractive index, and power deposition profiles in a D-shaped configuration were calculated. Results sh...A simulation on the propagation of lower hybrid wave in EAST is conducted. Ray tracing, evolution of the parallel refractive index, and power deposition profiles in a D-shaped configuration were calculated. Results show that wave propagation is affected by the plasma current, density, magnetic field, and power spectrum, etc. leading to a different power deposition. This is helpful in understanding the LHCD experiments on EAST.展开更多
Design of new metamaterial (MTM) traveling-wave antenna with “d-formed” left-handed structure is proposed. The proposed MTM structure is designed at a height of 0.8 mm from the ground plane with almost 2 GHz bandwid...Design of new metamaterial (MTM) traveling-wave antenna with “d-formed” left-handed structure is proposed. The proposed MTM structure is designed at a height of 0.8 mm from the ground plane with almost 2 GHz bandwidth. The most interesting feature of the design is the ability of enhancing the gain and total efficiency of the antenna without negative effects of the other important parameters like bandwidth. By using the “d-shaped” MTM structure and printed planar technique, the bandwidth of the MTM traveling-wave antenna is significantly increased at a resonant frequency of 6 GHz and also a foot print area reduction of the antenna structure is provided. Antenna size is 7.2 × 5 × 0.8 mm3. The proposed antenna is suitable for RF portable devices operating at 6 GHz.展开更多
The growth rate of the peeling mode instability with large toroidal mode number is calculated for general axisymmetric toroidal plasmas, including tokamaks and the spherical toms （ST） equilibia by using formalism pr...The growth rate of the peeling mode instability with large toroidal mode number is calculated for general axisymmetric toroidal plasmas, including tokamaks and the spherical toms （ST） equilibia by using formalism presented by Connor et al. Analytic equilibia with non-zero edge current density and quasi-uniform current profiles are assumed. It is found that in sharp D-shape tokamak plasma, the derivative of the safety factor with respect to the poloidal flux becomes very large, making the perturbed poloidal motion very large, in turn making a significant reduction of the growth rate of the peeling mode, similar to the X-point effect in diverted plasma. The large aspect ratio effect is also studied, which reduces the growth rate further.展开更多
Rockburst has always been a challenge for the safe construction of deep underground engineering.This study investigated the rockburst characteristics in highly-stressed D-shape tunnels under impact loads from rock bla...Rockburst has always been a challenge for the safe construction of deep underground engineering.This study investigated the rockburst characteristics in highly-stressed D-shape tunnels under impact loads from rock blasting and other mining-related dynamics disturbances.The biaxial Hopkinson pressure bar was utilized to apply varying biaxial prestress and the same impact loads to cube specimens with D-shape hole.High-speed camera and digital image correlation(DIC)were used to capture the failure process and strain field of specimen.The test results demonstrate that the D-shape hole specimen experience rockburst under coupled static stress and impact load.Under this circumstance,the rockburst mechanism of the D-shaped hole specimens involves spalling in sidewall induced by impact load,indicating dynamic tensile failure.The high static prestress provides the initial stress field,while the impact load disrupts the stress equilibrium,result in the stress or strain concentration in the sidewall of the D-shape hole,inducing rockburst.Moreover,the rockburst process can be divided into(1)calm stage,(2)crack initiation,propagation,and coalesce stage,(3)spalling stage and(4)rock fragments ejection stage.Impact load triggers rockburst occurrence,while vertical stress further determines the rockburst characteristics.The influence range and magnitude of strain concentration zone and displacement deformation of the tunnel surrounding rock increases with increasing vertical stress,thus inducing more severe rockburst.展开更多
Iris recognition technology recognizes a human based on his/her iris pattern. However, the accuracy of the iris recognition technology depends on accurate iris localization. Localizing a pupil region in the presence o...Iris recognition technology recognizes a human based on his/her iris pattern. However, the accuracy of the iris recognition technology depends on accurate iris localization. Localizing a pupil region in the presence of other low-intensity regions, such as hairs, eyebrows, and eyelashes, is a challenging task. This study proposes an iris localization technique that includes a localizing pupillary boundary in a sub-image by using an integral projection function and two-dimensional shape properties （e.g., area, geometry, and circularity）. The limbic boundary is localized using gradients and an error distance transform, and the boundary is regularized with active contours. Experimental results obtained from public databases show the superiority of the Drooosed techniaue over contemporary methods.展开更多
文摘A plasmonics waveguide structure that consist of a non-through metal–insulator–metal(MIM)waveguide coupled with a D-shaped cavity was designed.And the transmission properties,magnetic field distribution,and refractive index sensing functionality were simulated using the finite element method(FEM).A multi-Fano resonance phenomenon was clearly observable in the transmission spectra.The Fano resonances observed in the proposed structure arise from the interaction between the discrete states of the Dshaped resonant cavity and the continuum state of the non-through MIM waveguide.The influence of structural parameters on Fano resonance modulation was investigated through systematic parameter adjustments.Additionally,the refractive index sensing properties,based on the Fano resonance,were investigated by varying the refractive index of the MIM waveguide's insulator layer.A maximum sensitivity and FOM of 1155 RIU/nm and 40 were achieved,respectively.This research opens up new possibilities for designing and exploring high-sensitivity photonic devices,micro-sensors,and innovative on-chip sensing architectures for future applications.
基金This work was supported by the National Natural Science Foun-dation of China(Nos.52174098,41630642,and 51904335).
文摘To investigate the failure process and characteristics of D-shaped tunnels under different maximum principal stress directions θ, true-triaxial tests were conducted on cubic sandstone samples with a through D-shaped hole. The test results show that the failure process can be divided into 4 periods:calm, buckling deformation, gradual buckling and exfoliation of rock fragment, and formation of a Vshaped notch. With an increase in θ from 0° to 90°, the size of the rock fragments first decreases and then increases, whereas the fractal dimension of the rock fragments first increases and then decreases. Meanwhile, the failure position at the left side shifts from the sidewall to the corner and finally to the floor, whereas the failure position at the right side moves from the sidewall to the spandrel and finally to the roof, which is consistent with the failure position in underground engineering. In addition, the initial vertical failure stress first decreases and then increases. By comparing the results,the failure severities at different maximum principal stress directions can be ranked from high to low in the following order: 90°>60°>30°>45°>0°.
基金supported by the National Natural Science Foundation of China [grant number 11772059]the National KeyResearch and Development Program of China [grant number 2017yfc0822300]+1 种基金the 111 Project[grant number G20012017001]the Foundation of State Key Laboratory of Explosion Science and Technology of China[grant number KFJJ13-1Z]
文摘With the technical development of new warhead designs and improvised explosive device protection,irregular casing filled with explosive has been paid more attention recently. In this paper, we studied the fragmentation of a type of D-shaped casing, which is a common asymmetric casing in the field of warhead design. Based on the radiograph technique, static explosive experiments were conducted with D-shaped casings under four different eccentric initiation ratios to explore their fragmentation. A numerical model was then established to simulate the dynamic response of D-shaped casing filled with explosive. The results of numerical simulation were found to agree well with the experimental data.According to the results of numerical simulation and experimental data, the dynamic responses of Dshaped casing were analyzed. The results of the current work pave way for the innovative design of new warhead and for further studying the dynamic response of asymmetric casing.
基金supported by the National Basic Research Program(2014CB744100)State Key Laboratory of Aerodynamics(SKLA20130102)Dalian University of Technology(DUT14LK07)
文摘Open-loop flow control method was used to affect the development of a turbulent wake behind a D-shaped bluff body. Loud speakers were embedded inside the bluff body to produce two zero-net-mass- flux jets through 2 mm-wide span-wise slots located along the upper and lower edges on the rear wall. The drag forces for different actuation amplitudes （Cμ, the ratio between the momentum of the actuating jets and the moment deficit caused by the bluff body） and frequencies （StA） were examined. The effects of the phase difference in the two jets （0 and π） were also studied. It was found that when Cμ was 0.1%, a drag reduction up to 5% was achieved when the velocities of the two jets varied in phase at a frequency of 5tA = 0.16. When the velocities of the two jets varied π out of phase, significant drag increase was observed.
基金National Natural Science Foundation of China(NSFC)(61525501)
文摘A high sensitivity D-shaped hole double-cladding fiber temperature sensor based on surface plasmon resonance(SPR)is designed and investigated by a full-vector finite element method.Within the D-shaped hole doublecladding fiber,the hollow D-section is coated with gold film and then injected in a high thermo-optic coefficient liquid to realize the high temperature sensitivity for the fiber SPR temperature sensor.The numerical simulation results show that the peaking loss of the D-shaped hole double-cladding fiber SPR is hugely influenced by the distance between the D-shaped hole and fiber core and by the thickness of the gold film,but the temperature sensitivity is almost insensitive to the above parameters.When the thermo-optic coefficient is -2.8×10^(-4)∕℃,the thickness of the gold film is 47 nm,and the distance between the D-shaped hole and fiber core is 5μm,the temperature sensitivity of the D-shaped hole fiber SPR sensor can reach to -3.635 nm∕℃.
基金funded by the National Natural Science Foundation of China(Grant No.51874301)Primary Research&Development Plan of Xuzhou City(Grant No.KC20162).
文摘A new D-shaped tellurite photonic crystal fiber sensor based on the four-wave mixing(FWM)effect with the surface plasmon resonance(SPR)effect is designed and optimized.The substrate of the D-shaped photonic crystal fiber(D-PCF)is tellurite glass,and the polished surface is plated with the gold film and hydrogen gas-sensitive film.An air hole of the inner cladding,which is plated with the gold film and methane gas-sensitive film,is selected as the second sensing channel to simultaneously measure the concentration of hydrogen and methane.Based on the four-wave mixing,the wavelength shifts of the Stokes and anti-Stokes spectra resulting from the variation of the gas concentration can be used to accurately detect the concentrations of methane and hydrogen.Meanwhile,it is found that the SPR effect can increase the wavelength shifts,which means the sensitivity of methane and hydrogen augment.After parameter optimization,the maximum sensitivities of methane and hydrogen are 4.03 nm/%and-14.19 nm/%,respectively.Both the linearities are up to 99.9%.The resolution of methane is 1.25×10^(-2)%and hydrogen is 7.14×10^(-3)%.Moreover,the fiber length of this sensor is only 20mm,which is conducive to the construction of a compact or ultra-compact embedded FWM fiber sensor.
文摘Utilizing finite element analysis,the ballistic protection provided by a combination of perforated D-shaped and base armor plates,collectively referred to as radiator armor,is evaluated.ANSYS Explicit Dynamics is employed to simulate the ballistic impact of 7.62 mm armor-piercing projectiles on Aluminum AA5083-H116 and Steel Secure 500 armors,focusing on the evaluation of material deformation and penetration resistance at varying impact points.While the D-shaped armor plate is penetrated by the armor-piercing projectiles,the combination of the perforated D-shaped and base armor plates successfully halts penetration.A numerical model based on the finite element method is developed using software such as SolidWorks and ANSYS to analyze the interaction between radiator armor and bullet.The perforated design of radiator armor is to maintain airflow for radiator function,with hole sizes smaller than the bullet core diameter to protect radiator assemblies.Predictions are made regarding the brittle fracture resulting from the projectile core′s bending due to asymmetric impact,and the resulting fragments failed to penetrate the perforated base armor plate.Craters are formed on the surface of the perforated D-shaped armor plate due to the impact of projectile fragments.The numerical model accurately predicts hole growth and projectile penetration upon impact with the armor,demonstrating effective protection of the radiator assemblies by the radiator armor.
文摘A stable Q-switched erbium doped fiber laser emitting at 1558 nm is demonstrated using a cadmium selenide（CdSe） material coated onto a side-polished D-shape fiber as the saturable absorber（SA）. By elevating the input pump power from the threshold of 91 mW to the maximum available power of 136 mW, a pulse train with a maximum repetition rate of 57.44 kHz, minimum pulse width of 3.76 us, maximum average output power of7.99 mW, maximum pulse energy of 0.1391 uJ, and maximum peak power of 36.99 mW are obtained. The signalto-noise ratio of the spectrum is measured to be around 75 dB. This CdSe based SA is simple, robust, and reliable,and thus suitable for making a portable pulse laser source.
基金supported by National Natural Science Foundation of China (No.10575104)
文摘A simulation on the propagation of lower hybrid wave in EAST is conducted. Ray tracing, evolution of the parallel refractive index, and power deposition profiles in a D-shaped configuration were calculated. Results show that wave propagation is affected by the plasma current, density, magnetic field, and power spectrum, etc. leading to a different power deposition. This is helpful in understanding the LHCD experiments on EAST.
文摘Design of new metamaterial (MTM) traveling-wave antenna with “d-formed” left-handed structure is proposed. The proposed MTM structure is designed at a height of 0.8 mm from the ground plane with almost 2 GHz bandwidth. The most interesting feature of the design is the ability of enhancing the gain and total efficiency of the antenna without negative effects of the other important parameters like bandwidth. By using the “d-shaped” MTM structure and printed planar technique, the bandwidth of the MTM traveling-wave antenna is significantly increased at a resonant frequency of 6 GHz and also a foot print area reduction of the antenna structure is provided. Antenna size is 7.2 × 5 × 0.8 mm3. The proposed antenna is suitable for RF portable devices operating at 6 GHz.
基金supported by the National Magnetic Confinement Fusion Science Program of China(Grant No.2009GB101002)
文摘The growth rate of the peeling mode instability with large toroidal mode number is calculated for general axisymmetric toroidal plasmas, including tokamaks and the spherical toms （ST） equilibia by using formalism presented by Connor et al. Analytic equilibia with non-zero edge current density and quasi-uniform current profiles are assumed. It is found that in sharp D-shape tokamak plasma, the derivative of the safety factor with respect to the poloidal flux becomes very large, making the perturbed poloidal motion very large, in turn making a significant reduction of the growth rate of the peeling mode, similar to the X-point effect in diverted plasma. The large aspect ratio effect is also studied, which reduces the growth rate further.
基金supported by the National Natural Science Foundation of China(Grant No.42077244)the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.Z020005)。
文摘Rockburst has always been a challenge for the safe construction of deep underground engineering.This study investigated the rockburst characteristics in highly-stressed D-shape tunnels under impact loads from rock blasting and other mining-related dynamics disturbances.The biaxial Hopkinson pressure bar was utilized to apply varying biaxial prestress and the same impact loads to cube specimens with D-shape hole.High-speed camera and digital image correlation(DIC)were used to capture the failure process and strain field of specimen.The test results demonstrate that the D-shape hole specimen experience rockburst under coupled static stress and impact load.Under this circumstance,the rockburst mechanism of the D-shaped hole specimens involves spalling in sidewall induced by impact load,indicating dynamic tensile failure.The high static prestress provides the initial stress field,while the impact load disrupts the stress equilibrium,result in the stress or strain concentration in the sidewall of the D-shape hole,inducing rockburst.Moreover,the rockburst process can be divided into(1)calm stage,(2)crack initiation,propagation,and coalesce stage,(3)spalling stage and(4)rock fragments ejection stage.Impact load triggers rockburst occurrence,while vertical stress further determines the rockburst characteristics.The influence range and magnitude of strain concentration zone and displacement deformation of the tunnel surrounding rock increases with increasing vertical stress,thus inducing more severe rockburst.
基金supported by in-house PhD Program of COMSATS Institute of Information Technology,Islamabad Campus Pakistan
文摘Iris recognition technology recognizes a human based on his/her iris pattern. However, the accuracy of the iris recognition technology depends on accurate iris localization. Localizing a pupil region in the presence of other low-intensity regions, such as hairs, eyebrows, and eyelashes, is a challenging task. This study proposes an iris localization technique that includes a localizing pupillary boundary in a sub-image by using an integral projection function and two-dimensional shape properties （e.g., area, geometry, and circularity）. The limbic boundary is localized using gradients and an error distance transform, and the boundary is regularized with active contours. Experimental results obtained from public databases show the superiority of the Drooosed techniaue over contemporary methods.
