Multi-party quantum communication has gradually attracted widespread attention.To realize the perfect transmission of quantum states among multiple participants,a novel multi-party controlled cyclic remote preparation...Multi-party quantum communication has gradually attracted widespread attention.To realize the perfect transmission of quantum states among multiple participants,a novel multi-party controlled cyclic remote preparation protocol for arbitrary single-qubit states with three senders is proposed.With the permission of one controller,each sender can transmit an arbitrary singlequbit state to its neighbor.In addition,we give a universal protocol for multi-party controlled cyclic remote preparation of arbitrary single-qubit states in the case of multiple senders,which can realize deterministic cyclic preparation of multiple quantum states in one direction.The scheme shows that the communication task can be successfully achieved only if all senders cooperate with the controller,and there is no need for the senders to employ information splitting and additional operations before performing measurements.Finally,we discuss the cyclic remote preparation protocol with three senders under five types of noisy environment,and the closeness between the output state and original state is measured by calculating fidelity.展开更多
An evaluation method of engine cyclic variation is proposed based on fuzzy mathematics concept. The degree of engine cyclic variation is divided into 4 levels: stable, slight variation, moderate variation and serious ...An evaluation method of engine cyclic variation is proposed based on fuzzy mathematics concept. The degree of engine cyclic variation is divided into 4 levels: stable, slight variation, moderate variation and serious variation based on the statistic standard deviation of residual gas temperatures within the specified simulation cycles and the function of cyclic variation is also inducted for the cyclic variation control. Because the degree of engine cyclic variation can be estimated qualitatively, the effective control means can be applied to appease the undesired cyclic variation. Simulation result shows that for a very serious cyclic variation through the proper adjustment of the spark angle and the cyclic variation will disappear.展开更多
A low power dissipation control system for continuous cyclic peritoneal dialysis (CCPD) cycler and its characteristics are reported. Combined withhemodialysis and renal transplantation, peritoneal dialysis is used mai...A low power dissipation control system for continuous cyclic peritoneal dialysis (CCPD) cycler and its characteristics are reported. Combined withhemodialysis and renal transplantation, peritoneal dialysis is used mainly for thetreatment of renal failure. CCPD has been developed during 1980＇s. It provided automatic dialysis procedures during the night to avoid interruptions in patients＇dailyroutine. Furthermore,there is a remarkable decrease in peritonitis occurance usingCCPD. The control system is a critical part for CCPD cycler. The system is approvedto be reliable and flexible in practical experiments. When AC power failure,the system can still ensure the completion of dialysis.展开更多
This paper investigates the formation control of a class of multi-agent systems moving on a circle, whose topology is a cyclic graph, and presents several new results for the following two cases: Case I, the agents wi...This paper investigates the formation control of a class of multi-agent systems moving on a circle, whose topology is a cyclic graph, and presents several new results for the following two cases: Case I, the agents with single-integrator kinematics,and Case II, the agents with double-integrator kinematics. Firstly,for Case I, two control protocols are proposed under which the multiagent systems keep a uniformly-spaced formation. Secondly,we study Case II, and a control protocol is designed for this case, then the stability of the formation is proved. Finally, three simulations are studied by using our presented results. The study of illustrative examples with simulations shows that our results as well as designed control protocols work very well in studying the formation control of this class of multi-agent systems.展开更多
Carrier frequency and symbol rate estimation are the main contents of parameter estimation,which is the basis of modulation recognition and further processing of signals especially in non-cooperative communication.Wit...Carrier frequency and symbol rate estimation are the main contents of parameter estimation,which is the basis of modulation recognition and further processing of signals especially in non-cooperative communication.With the development of wireless communication,the signal transmission environment has become increasingly bad,causing more difficulties in parameter estimation.It is well known that the signal cycle spectrum is robust to noises and signal parameters are closely related.In practice,it is impossible to calculate the cyclic spectrum of infinite length data signals.When using finite length data to obtain a cycle spectrum,the truncation noise is induced,resulting in interference.It is necessary to overcome the influence of noises in order to improve the detection ability of discrete spectral lines.An improved method of the discrete spectral line extraction algorithm is proposed by reflecting the amplitude advantage of discrete spectral lines through salient features of continuous noises in discrete spectral line neighborhood.展开更多
The influence of heat treatment on the strain-controlled fatigue behavior of cast NZ30 K alloy was investigated. Compared with the as-cast and solutionized（T4） alloys, the peak-aged（T6） and over-aged（T7）counterp...The influence of heat treatment on the strain-controlled fatigue behavior of cast NZ30 K alloy was investigated. Compared with the as-cast and solutionized（T4） alloys, the peak-aged（T6） and over-aged（T7）counterparts have a higher cyclic stress and a lower plastic strain value due to the precipitation strengthening. The as-cast and T4-treated alloys have a higher fatigue strength/yield strength ratio than the aged alloys, which is mainly attributed to their higher cyclic hardening. Under stress-controlled loading,the aged alloys show lower hysteresis energies than the as-cast and T4-treated counterparts, leading to longer fatigue lifetimes. For the T4-treated alloy, the cyclic hardening and fatigue failure are controlled by the dislocations-slip and twinning, while for both the as-cast and T6-treated counterparts, they are controlled by the dislocation-slip. For the T7-treated alloy, cyclic deformation and failure behavior are mainly dependent on dislocations-slip and grain boundary sliding.展开更多
Objective: To assess prevalence of cyclical mastalgia and its main determinants in women who attended in health centers of Hamadan City, Iran.Methods: This case–control study was conducted on 400 women(case: cyclical...Objective: To assess prevalence of cyclical mastalgia and its main determinants in women who attended in health centers of Hamadan City, Iran.Methods: This case–control study was conducted on 400 women(case: cyclical mastalgia, n = 240; control: without cyclical mastalgia, n = 160) who attended family planning clinic for routine follow-up in health centers. The cluster sampling was used.Information was collected by interviewing and using a standardized validated questionnaire. Severity of mastalgia was assessed through using visual analog scaling. Data processing and statistical analysis were performed by using SPSS 19.0.Results: The results revealed that majority of women(60.0%) experienced cyclical mastalgia.Out of these, 22.5% and 37.5% were mild and moderate-to-severe mastalgia, respectively. No association was revealed in experience of depression and anxiety in mastalgia group. In a multivariable logistic regression model, the increasing age, age of marriage, history of abortion and history of premenstrual syndrome were main determinants of mastalgia, while use of oral contraceptive and regular exercise was associated with lower incidence of mastalgia.Conclusions: Most of women with breast discomfort suffered cyclical mastalgia which severity can be determined by advanced age, age of marriage, history of abortion and history of premenstrual syndrome, but inversely by oral contraceptive use and exercise activity.展开更多
The controllability for switched linear system with time_delay in controls was first investigated. The whole work contains three parts. This is the first part, including problem formulation and some preliminaries. Fir...The controllability for switched linear system with time_delay in controls was first investigated. The whole work contains three parts. This is the first part, including problem formulation and some preliminaries. Firstly, the mathematical model of switched linear systems with time_delay in control functions was presented. Secondly, the concept of column space, cyclic invariant subspace and generalized cyclic invariant subspace were introduced. And some basic properties, such as separation lemma, were presented. Finally, a basic lemma was given to reveal the relation between the solution set of a centain integral equations and the generalized cyclic invariant subspace. This lemma will play an important role in the determination of controllability. All these definitions and lemmas are necessary research tools for controllability analysis.展开更多
A bench-scale reactor（72 L） red with domestic sewage, was operated more than 3 months with three operation modes： traditional mode, modified mode and real-time control mode, so as to evaluate effects of the operati...A bench-scale reactor（72 L） red with domestic sewage, was operated more than 3 months with three operation modes： traditional mode, modified mode and real-time control mode, so as to evaluate effects of the operation mode on the system performance and to develop a feasible control strategy. Results obtained from fixed-time control study indicate that the variations of the pH and oxidation-reduction potential（ORP） profiles can represent dynamic characteristics of system and the cycle sequences can be controlled and optimized by the control points on the pH and ORP profiles. A control strategy was, therefore, developed and applied to real-time control mode. Compared with traditional mode, the total nitrogen（TN） removal can be increased by approximately 16% in modified mode and a mean TN removal of 92% was achieved in real-time control mode. Moreover, approximately 12.5% aeration energy was saved in real- time control mode. The result of this study shows that the performance of nitrogen removal was enhanced in modified operation mode. Moreover, the real-time control made it possible to optimize process operation and save aeration energy.展开更多
The theory of shared control combines organically the control of every controlled ele-ments and with it all the controlled elements share the same control element. Applying theschemes of shared control searched by ass...The theory of shared control combines organically the control of every controlled ele-ments and with it all the controlled elements share the same control element. Applying theschemes of shared control searched by assembly programs, an integrated control of all the ele-ments is fulfilled. The distinguishing point of the method is that the maximum control output canbe obtained with the least input information. Hence it is the optimum for the conversion of com-bination states. Finally, a thared rotary valve is designed, and it is the simplest with only onegroup of control holes.展开更多
The reduction approaches are presented for vibration control of symmetric, cyclic periodic and linking structures. The condensation of generalized coordinates, the locations of sensors and actuators, and the relation ...The reduction approaches are presented for vibration control of symmetric, cyclic periodic and linking structures. The condensation of generalized coordinates, the locations of sensors and actuators, and the relation between system inputs and control forces are assumed to be set in a symmetric way so that the control system posses the same repetition as the structure considered. By employing proper transformations of condensed generalized coordinates and the system inputs, the vibration control of an entire system can be implemented by carrying out the control of a number of sub-structures, and thus the dimension of the control problem can be significantly reduced.展开更多
基金the National Natural Science Foundation of China(Nos.62172341,62172196,62272208)。
文摘Multi-party quantum communication has gradually attracted widespread attention.To realize the perfect transmission of quantum states among multiple participants,a novel multi-party controlled cyclic remote preparation protocol for arbitrary single-qubit states with three senders is proposed.With the permission of one controller,each sender can transmit an arbitrary singlequbit state to its neighbor.In addition,we give a universal protocol for multi-party controlled cyclic remote preparation of arbitrary single-qubit states in the case of multiple senders,which can realize deterministic cyclic preparation of multiple quantum states in one direction.The scheme shows that the communication task can be successfully achieved only if all senders cooperate with the controller,and there is no need for the senders to employ information splitting and additional operations before performing measurements.Finally,we discuss the cyclic remote preparation protocol with three senders under five types of noisy environment,and the closeness between the output state and original state is measured by calculating fidelity.
文摘An evaluation method of engine cyclic variation is proposed based on fuzzy mathematics concept. The degree of engine cyclic variation is divided into 4 levels: stable, slight variation, moderate variation and serious variation based on the statistic standard deviation of residual gas temperatures within the specified simulation cycles and the function of cyclic variation is also inducted for the cyclic variation control. Because the degree of engine cyclic variation can be estimated qualitatively, the effective control means can be applied to appease the undesired cyclic variation. Simulation result shows that for a very serious cyclic variation through the proper adjustment of the spark angle and the cyclic variation will disappear.
文摘A low power dissipation control system for continuous cyclic peritoneal dialysis (CCPD) cycler and its characteristics are reported. Combined withhemodialysis and renal transplantation, peritoneal dialysis is used mainly for thetreatment of renal failure. CCPD has been developed during 1980＇s. It provided automatic dialysis procedures during the night to avoid interruptions in patients＇dailyroutine. Furthermore,there is a remarkable decrease in peritonitis occurance usingCCPD. The control system is a critical part for CCPD cycler. The system is approvedto be reliable and flexible in practical experiments. When AC power failure,the system can still ensure the completion of dialysis.
基金supported by the National Natural Science Foundation of China(G61374065,61373081,61303007,61401260,61503225,61572298)the Research Fund for the Taishan Scholar Project of Shandong Province of Chinathe Natural Science Foundation of Shandong Province(ZR2015FQ003)
文摘This paper investigates the formation control of a class of multi-agent systems moving on a circle, whose topology is a cyclic graph, and presents several new results for the following two cases: Case I, the agents with single-integrator kinematics,and Case II, the agents with double-integrator kinematics. Firstly,for Case I, two control protocols are proposed under which the multiagent systems keep a uniformly-spaced formation. Secondly,we study Case II, and a control protocol is designed for this case, then the stability of the formation is proved. Finally, three simulations are studied by using our presented results. The study of illustrative examples with simulations shows that our results as well as designed control protocols work very well in studying the formation control of this class of multi-agent systems.
基金supported by the National Key R&D Program of China(2016YFB0800203)
文摘Carrier frequency and symbol rate estimation are the main contents of parameter estimation,which is the basis of modulation recognition and further processing of signals especially in non-cooperative communication.With the development of wireless communication,the signal transmission environment has become increasingly bad,causing more difficulties in parameter estimation.It is well known that the signal cycle spectrum is robust to noises and signal parameters are closely related.In practice,it is impossible to calculate the cyclic spectrum of infinite length data signals.When using finite length data to obtain a cycle spectrum,the truncation noise is induced,resulting in interference.It is necessary to overcome the influence of noises in order to improve the detection ability of discrete spectral lines.An improved method of the discrete spectral line extraction algorithm is proposed by reflecting the amplitude advantage of discrete spectral lines through salient features of continuous noises in discrete spectral line neighborhood.
基金supported by the Key Research Project of Jiangxi Academy of Sciences(No.2017-YZD2-03)the Introduction Doctoral Program of Jiangxi Academy of Sciences(No.2016-YYB-09)the Collaborative innovation GSP Project of Jiangxi Academy of Sciences(No.2016-XTPH1-09)
文摘The influence of heat treatment on the strain-controlled fatigue behavior of cast NZ30 K alloy was investigated. Compared with the as-cast and solutionized（T4） alloys, the peak-aged（T6） and over-aged（T7）counterparts have a higher cyclic stress and a lower plastic strain value due to the precipitation strengthening. The as-cast and T4-treated alloys have a higher fatigue strength/yield strength ratio than the aged alloys, which is mainly attributed to their higher cyclic hardening. Under stress-controlled loading,the aged alloys show lower hysteresis energies than the as-cast and T4-treated counterparts, leading to longer fatigue lifetimes. For the T4-treated alloy, the cyclic hardening and fatigue failure are controlled by the dislocations-slip and twinning, while for both the as-cast and T6-treated counterparts, they are controlled by the dislocation-slip. For the T7-treated alloy, cyclic deformation and failure behavior are mainly dependent on dislocations-slip and grain boundary sliding.
基金Supported by Research Deputy of Hamadan University of Medical Sciences,Hamadan,Iran(Grant No.16.35.1.1642)
文摘Objective: To assess prevalence of cyclical mastalgia and its main determinants in women who attended in health centers of Hamadan City, Iran.Methods: This case–control study was conducted on 400 women(case: cyclical mastalgia, n = 240; control: without cyclical mastalgia, n = 160) who attended family planning clinic for routine follow-up in health centers. The cluster sampling was used.Information was collected by interviewing and using a standardized validated questionnaire. Severity of mastalgia was assessed through using visual analog scaling. Data processing and statistical analysis were performed by using SPSS 19.0.Results: The results revealed that majority of women(60.0%) experienced cyclical mastalgia.Out of these, 22.5% and 37.5% were mild and moderate-to-severe mastalgia, respectively. No association was revealed in experience of depression and anxiety in mastalgia group. In a multivariable logistic regression model, the increasing age, age of marriage, history of abortion and history of premenstrual syndrome were main determinants of mastalgia, while use of oral contraceptive and regular exercise was associated with lower incidence of mastalgia.Conclusions: Most of women with breast discomfort suffered cyclical mastalgia which severity can be determined by advanced age, age of marriage, history of abortion and history of premenstrual syndrome, but inversely by oral contraceptive use and exercise activity.
文摘The controllability for switched linear system with time_delay in controls was first investigated. The whole work contains three parts. This is the first part, including problem formulation and some preliminaries. Firstly, the mathematical model of switched linear systems with time_delay in control functions was presented. Secondly, the concept of column space, cyclic invariant subspace and generalized cyclic invariant subspace were introduced. And some basic properties, such as separation lemma, were presented. Finally, a basic lemma was given to reveal the relation between the solution set of a centain integral equations and the generalized cyclic invariant subspace. This lemma will play an important role in the determination of controllability. All these definitions and lemmas are necessary research tools for controllability analysis.
基金The Project of Beijing Science and Technology Committee (No.020620010120) ,the Hi_Tech Research and Development Program(863) of China (No.2004AA601020) ,the Project under Key International Cooperative Programs of NSFC(No.50521140075) and the Project of Key Laboratory of Beiing
文摘A bench-scale reactor（72 L） red with domestic sewage, was operated more than 3 months with three operation modes： traditional mode, modified mode and real-time control mode, so as to evaluate effects of the operation mode on the system performance and to develop a feasible control strategy. Results obtained from fixed-time control study indicate that the variations of the pH and oxidation-reduction potential（ORP） profiles can represent dynamic characteristics of system and the cycle sequences can be controlled and optimized by the control points on the pH and ORP profiles. A control strategy was, therefore, developed and applied to real-time control mode. Compared with traditional mode, the total nitrogen（TN） removal can be increased by approximately 16% in modified mode and a mean TN removal of 92% was achieved in real-time control mode. Moreover, approximately 12.5% aeration energy was saved in real- time control mode. The result of this study shows that the performance of nitrogen removal was enhanced in modified operation mode. Moreover, the real-time control made it possible to optimize process operation and save aeration energy.
基金Supported by National Natural Science Foundation of China （61273260）, Specialized Research Fund for the Doctoral Program of Higher Education of China （20121333120010）, Natural Scientific Research Foundation of the Higher Education Institutions of Hebei Province （2010t65）, the Major Program of the National Natural Science Foundation of China （61290322）, Foundation of Key Labora- tory of System Control and Information Processing, Ministry of Education （SCIP2012008）, and Science and Technology Research and Development Plan of Qinhuangdao City （2012021A041）
文摘The theory of shared control combines organically the control of every controlled ele-ments and with it all the controlled elements share the same control element. Applying theschemes of shared control searched by assembly programs, an integrated control of all the ele-ments is fulfilled. The distinguishing point of the method is that the maximum control output canbe obtained with the least input information. Hence it is the optimum for the conversion of com-bination states. Finally, a thared rotary valve is designed, and it is the simplest with only onegroup of control holes.
基金Project supported by the National Natural Science Foundation of China (No.60034010) the Australia Research Council Discovery-Projects Grant (No.DP0210716)
文摘The reduction approaches are presented for vibration control of symmetric, cyclic periodic and linking structures. The condensation of generalized coordinates, the locations of sensors and actuators, and the relation between system inputs and control forces are assumed to be set in a symmetric way so that the control system posses the same repetition as the structure considered. By employing proper transformations of condensed generalized coordinates and the system inputs, the vibration control of an entire system can be implemented by carrying out the control of a number of sub-structures, and thus the dimension of the control problem can be significantly reduced.
