Minimal cut sets （or prime implicants： minimal combinations of basic event conditions leading to system failure） are important information for reliability/safety analysis and design. To obtain minimal cut sets for ...Minimal cut sets （or prime implicants： minimal combinations of basic event conditions leading to system failure） are important information for reliability/safety analysis and design. To obtain minimal cut sets for general non-coherent fault trees, including negative basic events or multi-valued basic events, a special procedure such as the consensus rule must be applied to the results obtained by logical operations for coherent fault trees, which will require more steps and time. This paper proposes a simple method for a non-coherent fault tree, whose top event is represented as an AND combination of monotonic sub-trees. A ＂monotonic＂ sub-tree means that it does not have both positive and negative representations for each basic event. It is proven that minimal cut sets can be obtained by a conventional method for coherent fault trees. An illustrative example of a simple event tree analysis shows the detail and characteristics of the proposed method.展开更多
A new fault tree analysis (FTA) computation method is put forth by using modularization technique in FTA with cut sets matrix, and can reduce NP (Nondeterministic polynomial) difficulty effectively. This software can ...A new fault tree analysis (FTA) computation method is put forth by using modularization technique in FTA with cut sets matrix, and can reduce NP (Nondeterministic polynomial) difficulty effectively. This software can run in IBM PC and DOS 3.0 and up. The method provides theoretical basis and computation tool for application of FTA technique in the common engineering system展开更多
By analyzing the results of compliance minimization of thermoelastic structures,we observed that microstructures play an important role in this optimization problem.Then,we propose to use a multiple variable cutting(M...By analyzing the results of compliance minimization of thermoelastic structures,we observed that microstructures play an important role in this optimization problem.Then,we propose to use a multiple variable cutting(M-VCUT)level set-based model of microstructures to solve the concurrent two-scale topology optimization of thermoelastic structures.A microstructure is obtained by combining multiple virtual microstructures that are derived respectively from multiple microstructure prototypes,thus giving more diversity of microstructure and more flexibility in design optimization.The effective mechanical properties of microstructures are computed in an off-line phase by using the homogenization method,and then a mapping relationship between the design variables and the effective properties is established,which gives a data-driven model of microstructure.In the online phase,the data-driven model is used in the finite element analysis to improve the computational efficiency.The compliance minimization problem is considered,and the results of numerical examples prove that the proposed method is effective.展开更多
This paper gives the definition of λ-cut sets and studies the structure of fuzzy rough sets. Based on the concept of rough sets, this paper proposes the representation theorem of fuzzy rough sets.
Intuitionistic fuzzy starshaped sets (i.f.s.) is a generalized model of fuzzy starshaped set. By the definition of i.f.s., the intuitionistic fuzzy general starshaped sets (i.f.g.s.), intuitionistic fuzzy quasi-starsh...Intuitionistic fuzzy starshaped sets (i.f.s.) is a generalized model of fuzzy starshaped set. By the definition of i.f.s., the intuitionistic fuzzy general starshaped sets (i.f.g.s.), intuitionistic fuzzy quasi-starshaped sets (i.f.q-s.) and intuitionistic fuzzy pseudo-starshaped sets (i.f.p-s.) are proposed and the relationships among them are studied. The equivalent discrimination conditions of i.f.q-s. and i.f.p-s. are presented on the basis of their properties which are meaningful for the research of the generalized fuzzy starshaped sets. Moreover, the invariance of the two given fuzzy sets under the translation transformation and linear reversible transformation are discussed.展开更多
The system of linear equations plays a vital role in real life problems such as optimization, economics, and engineering. The parameters of the system of linear equations are modeled by taking the experimental or obse...The system of linear equations plays a vital role in real life problems such as optimization, economics, and engineering. The parameters of the system of linear equations are modeled by taking the experimental or observation data. So the parameters of the system actually contain uncertainty rather than the crisp one. The uncertainties may be considered in term of interval or fuzzy numbers. In this paper, a detailed study of three solution techniques namely Classical Method, Extension Principle method and α-cuts and interval Arithmetic Method to solve the system of fuzzy linear equations has been done. Appropriate applications are given to illustrate each technique. Then we discuss the comparison of the different methods numerically and graphically.展开更多
This paper presents an approximate algorithm based on simulated annealing to achieve the maximum probability of the minimal cut sets for a fault tree. Near optimal minimal cut sets and important sequence of the basic ...This paper presents an approximate algorithm based on simulated annealing to achieve the maximum probability of the minimal cut sets for a fault tree. Near optimal minimal cut sets and important sequence of the basic events are also solved by the method. Computer simulations show that the algorithm performs very well.展开更多
文摘Minimal cut sets （or prime implicants： minimal combinations of basic event conditions leading to system failure） are important information for reliability/safety analysis and design. To obtain minimal cut sets for general non-coherent fault trees, including negative basic events or multi-valued basic events, a special procedure such as the consensus rule must be applied to the results obtained by logical operations for coherent fault trees, which will require more steps and time. This paper proposes a simple method for a non-coherent fault tree, whose top event is represented as an AND combination of monotonic sub-trees. A ＂monotonic＂ sub-tree means that it does not have both positive and negative representations for each basic event. It is proven that minimal cut sets can be obtained by a conventional method for coherent fault trees. An illustrative example of a simple event tree analysis shows the detail and characteristics of the proposed method.
文摘A new fault tree analysis (FTA) computation method is put forth by using modularization technique in FTA with cut sets matrix, and can reduce NP (Nondeterministic polynomial) difficulty effectively. This software can run in IBM PC and DOS 3.0 and up. The method provides theoretical basis and computation tool for application of FTA technique in the common engineering system
基金supported by the National Natural Science Foundation of China(Grant No.12272144).
文摘By analyzing the results of compliance minimization of thermoelastic structures,we observed that microstructures play an important role in this optimization problem.Then,we propose to use a multiple variable cutting(M-VCUT)level set-based model of microstructures to solve the concurrent two-scale topology optimization of thermoelastic structures.A microstructure is obtained by combining multiple virtual microstructures that are derived respectively from multiple microstructure prototypes,thus giving more diversity of microstructure and more flexibility in design optimization.The effective mechanical properties of microstructures are computed in an off-line phase by using the homogenization method,and then a mapping relationship between the design variables and the effective properties is established,which gives a data-driven model of microstructure.In the online phase,the data-driven model is used in the finite element analysis to improve the computational efficiency.The compliance minimization problem is considered,and the results of numerical examples prove that the proposed method is effective.
基金重庆市自然科学基金(the Natural Science Foundation of Chongqing of China under Grant No.2005BB2063)国家教育部新世纪人才支持计划(the New Century Excellent Talent Foundation from MOE of China under Grant)+1 种基金重庆市教委科学技术项目(No.050509No.060517)
基金Supported by the National Natural Science Foundation of China (No. 69803007)
文摘This paper gives the definition of λ-cut sets and studies the structure of fuzzy rough sets. Based on the concept of rough sets, this paper proposes the representation theorem of fuzzy rough sets.
文摘Intuitionistic fuzzy starshaped sets (i.f.s.) is a generalized model of fuzzy starshaped set. By the definition of i.f.s., the intuitionistic fuzzy general starshaped sets (i.f.g.s.), intuitionistic fuzzy quasi-starshaped sets (i.f.q-s.) and intuitionistic fuzzy pseudo-starshaped sets (i.f.p-s.) are proposed and the relationships among them are studied. The equivalent discrimination conditions of i.f.q-s. and i.f.p-s. are presented on the basis of their properties which are meaningful for the research of the generalized fuzzy starshaped sets. Moreover, the invariance of the two given fuzzy sets under the translation transformation and linear reversible transformation are discussed.
文摘The system of linear equations plays a vital role in real life problems such as optimization, economics, and engineering. The parameters of the system of linear equations are modeled by taking the experimental or observation data. So the parameters of the system actually contain uncertainty rather than the crisp one. The uncertainties may be considered in term of interval or fuzzy numbers. In this paper, a detailed study of three solution techniques namely Classical Method, Extension Principle method and α-cuts and interval Arithmetic Method to solve the system of fuzzy linear equations has been done. Appropriate applications are given to illustrate each technique. Then we discuss the comparison of the different methods numerically and graphically.
文摘This paper presents an approximate algorithm based on simulated annealing to achieve the maximum probability of the minimal cut sets for a fault tree. Near optimal minimal cut sets and important sequence of the basic events are also solved by the method. Computer simulations show that the algorithm performs very well.
