Green apple targets are difficult to identify for having similar color with backgrounds such as leaves.The primary goal of this study was to detect green apples in natural scenes by applying saliency detection and Gau...Green apple targets are difficult to identify for having similar color with backgrounds such as leaves.The primary goal of this study was to detect green apples in natural scenes by applying saliency detection and Gaussian curve fitting algorithm.Firstly,the image was represented as a close-loop graph with superpixels as nodes.These nodes were ranked based on the similarity to background and foreground queries to generate the final saliency map.Secondly,Gaussian curve fitting was carried out to fit the V-component in YUV color space in salient areas,and a threshold was selected to binarize the image.To verify the validity of the proposed algorithm,55 images were selected and compared with the common used image segmentation algorithms such as k-means clustering algorithm and FCM(Fuzzy C-means clustering algorithm).Four parameters including recognition ratio,FPR(false positive rate),FNR(false negative rate)and FDR(false detection rate)were used to evaluate the results,which were 91.84%,1.36%,8.16%and 4.22%,respectively.The results indicated that it was effective and feasible to apply this method to the detection of green apples in nature scenes.展开更多
During the 3D shape measurement,there are noises in the images that are obtained by the capture system.The traditional method,Fourier transform profilometry(FTP) technique,improves the accuracy only by the filtering m...During the 3D shape measurement,there are noises in the images that are obtained by the capture system.The traditional method,Fourier transform profilometry(FTP) technique,improves the accuracy only by the filtering method in the frequency domain.In this paper,the curve fitting method is used for the light field distribution calculation before the filtering process applied in the frequency domain by choosing a suitable filter window,and then the higher quality of the basic frequency component signal is got.This method can avoid the frequency overlapping caused by the noise,so the improvement of the measuring accuracy of FTP is realized.展开更多
Two methods of computer data processing, linear fitting and nonlinear fitting, are applied to compute the rate constant for hydrogen peroxide decomposition reaction. The results indicate that not only the new methods ...Two methods of computer data processing, linear fitting and nonlinear fitting, are applied to compute the rate constant for hydrogen peroxide decomposition reaction. The results indicate that not only the new methods work with no necessity to measure the final oxygen volume, but also the fitting errors decrease evidently.展开更多
With the development of Laser Induced Breakdown Spectroscopy （LIBS）, increasing numbers of researchers have begun to focus on problems of the application. We are not just satisfied with analyzing what kinds of eleme...With the development of Laser Induced Breakdown Spectroscopy （LIBS）, increasing numbers of researchers have begun to focus on problems of the application. We are not just satisfied with analyzing what kinds of elements are in the samples but are also eager to accomplish quantitative detection with LIBS. There are several means to improve the limit of detection and stability, which are important to quantitative detection, especially of trace elements, increasing the laser energy and the resolution of spectrometer, using dual pulse setup, vacuuming the ablation environment etc. All of these methods are about to update the hardware system, which is effective but expensive. So we establish the following spectrum data processing methods to improve the trace elements analysis in this paper： spectrum sifting, noise filtering, and peak fitting. There are small algorithms in these three method groups, which we will introduce in detail. Finally, we discuss how these methods affect the results of trace elements detection in an experiment to analyze the lead content in Chinese cabbage.展开更多
A visual sensing system was developed. The system is suitable for titanium-alloy electron-beam welding, and senses and detects molten-pool dynamic processes. A suite of processing programs for colored molten-pool imag...A visual sensing system was developed. The system is suitable for titanium-alloy electron-beam welding, and senses and detects molten-pool dynamic processes. A suite of processing programs for colored molten-pool images in titanium-alloy electron-beam welding was developed using Matlab software; molten-pool edge images are completely obtained using the program. The Matlab software was used to write a program which could extract the molten-pool width. The functional relationship between the molten-pool width and penetration under the experimental conditions was obtained by a curve-fitting method, and provided the theoretical basis for further penetration control.展开更多
This paper starts with untime-diversification of the time-diversification deformation model and gives displacement distribution model of untime-diversification and simplifies further the study of deformation model. Th...This paper starts with untime-diversification of the time-diversification deformation model and gives displacement distribution model of untime-diversification and simplifies further the study of deformation model. The paper discusses the problem of least squares fitting of coordinate parameters model—parameters of deformation model. During discussion, the basic means of cubic B splines and two steps of multidimensional disorder datum fitting are adopted which can make fitting function calculated mostly approximate coordinate parameters model and it can make calculation easier.展开更多
Uncontrolled residual stresses have significant effects on the service time and defects of the spun parts.Nowadays,X-Ray Diffraction(XRD)method has been widely used in the residual stress measurement of industry produ...Uncontrolled residual stresses have significant effects on the service time and defects of the spun parts.Nowadays,X-Ray Diffraction(XRD)method has been widely used in the residual stress measurement of industry products with different forming processes.The calculated residual stress is usually obtained from the data fitting slope of strain and angle with Ordinary Least Squares(OLS)method.But this fitting method is not always suitable for the big fluctuant data.In this paper,the Weighted Least Square(WLS)method is used for the data fitting and compared with the OLS method.The nickel-based superalloy GH3030 and iron-based superalloy GH1140 are applied in the multi-pass cold spinning experiments.The residual stress distributions of normal,potential crack and wrinkle workpieces are discussed with the grain structure.The results show that WLS method has better goodness of fit compared with OLS method.The residual stress distributions have special relationship with potential crack,wrinkle workpiece and grain structure.展开更多
Approximation methods are used in the analysis and prediction of data, especially laboratory data, in engineering projects. These methods are usually linear and are obtained by least-square-error approaches. There are...Approximation methods are used in the analysis and prediction of data, especially laboratory data, in engineering projects. These methods are usually linear and are obtained by least-square-error approaches. There are many problems in which linear models cannot be applied. Because of that there are logarithmic, exponential and polynomial curve-fitting models. These nonlinear models have a limited application in engineering problems. The variation of most data is such that the nonlinearity cannot be approximated by the above approaches. These methods are also not applicable when there is a large amount of data. For these reasons, a method of piecewise cubic spline approximation has been developed. The model presented here is capable of following the local nonuniformity of data in order to obtain a good fit of a curve to the data. There is C1 continuity at the limits of the piecewise elements. The model is tested and examined with four problems here. The results show that the model can approximate highly nonlinear data efficiently.展开更多
基金This study was supported by the National High Technology Research and Development Program of China(“863”Program)(No.2013AA10230402)Agricultural science and technology project of Shaanxi Province(No.2016NY-157)Fundamental Research Funds Central Universities(2452016077).
文摘Green apple targets are difficult to identify for having similar color with backgrounds such as leaves.The primary goal of this study was to detect green apples in natural scenes by applying saliency detection and Gaussian curve fitting algorithm.Firstly,the image was represented as a close-loop graph with superpixels as nodes.These nodes were ranked based on the similarity to background and foreground queries to generate the final saliency map.Secondly,Gaussian curve fitting was carried out to fit the V-component in YUV color space in salient areas,and a threshold was selected to binarize the image.To verify the validity of the proposed algorithm,55 images were selected and compared with the common used image segmentation algorithms such as k-means clustering algorithm and FCM(Fuzzy C-means clustering algorithm).Four parameters including recognition ratio,FPR(false positive rate),FNR(false negative rate)and FDR(false detection rate)were used to evaluate the results,which were 91.84%,1.36%,8.16%and 4.22%,respectively.The results indicated that it was effective and feasible to apply this method to the detection of green apples in nature scenes.
基金supported by the Natural Science Foundation of Tianjin Municipal Science and Technology Commission (No. 06YFJMC15600)
文摘During the 3D shape measurement,there are noises in the images that are obtained by the capture system.The traditional method,Fourier transform profilometry(FTP) technique,improves the accuracy only by the filtering method in the frequency domain.In this paper,the curve fitting method is used for the light field distribution calculation before the filtering process applied in the frequency domain by choosing a suitable filter window,and then the higher quality of the basic frequency component signal is got.This method can avoid the frequency overlapping caused by the noise,so the improvement of the measuring accuracy of FTP is realized.
文摘Two methods of computer data processing, linear fitting and nonlinear fitting, are applied to compute the rate constant for hydrogen peroxide decomposition reaction. The results indicate that not only the new methods work with no necessity to measure the final oxygen volume, but also the fitting errors decrease evidently.
基金supported by National High-Tech R&D Program(863 Program),China(No.2013AA102402)
文摘With the development of Laser Induced Breakdown Spectroscopy （LIBS）, increasing numbers of researchers have begun to focus on problems of the application. We are not just satisfied with analyzing what kinds of elements are in the samples but are also eager to accomplish quantitative detection with LIBS. There are several means to improve the limit of detection and stability, which are important to quantitative detection, especially of trace elements, increasing the laser energy and the resolution of spectrometer, using dual pulse setup, vacuuming the ablation environment etc. All of these methods are about to update the hardware system, which is effective but expensive. So we establish the following spectrum data processing methods to improve the trace elements analysis in this paper： spectrum sifting, noise filtering, and peak fitting. There are small algorithms in these three method groups, which we will introduce in detail. Finally, we discuss how these methods affect the results of trace elements detection in an experiment to analyze the lead content in Chinese cabbage.
文摘A visual sensing system was developed. The system is suitable for titanium-alloy electron-beam welding, and senses and detects molten-pool dynamic processes. A suite of processing programs for colored molten-pool images in titanium-alloy electron-beam welding was developed using Matlab software; molten-pool edge images are completely obtained using the program. The Matlab software was used to write a program which could extract the molten-pool width. The functional relationship between the molten-pool width and penetration under the experimental conditions was obtained by a curve-fitting method, and provided the theoretical basis for further penetration control.
文摘This paper starts with untime-diversification of the time-diversification deformation model and gives displacement distribution model of untime-diversification and simplifies further the study of deformation model. The paper discusses the problem of least squares fitting of coordinate parameters model—parameters of deformation model. During discussion, the basic means of cubic B splines and two steps of multidimensional disorder datum fitting are adopted which can make fitting function calculated mostly approximate coordinate parameters model and it can make calculation easier.
基金supported by the Zhejiang Provincial Natural Science Foundation,China(No.LZ17E050001)the National Natural Science Foundation of China(No.51975301 and No.52075359)。
文摘Uncontrolled residual stresses have significant effects on the service time and defects of the spun parts.Nowadays,X-Ray Diffraction(XRD)method has been widely used in the residual stress measurement of industry products with different forming processes.The calculated residual stress is usually obtained from the data fitting slope of strain and angle with Ordinary Least Squares(OLS)method.But this fitting method is not always suitable for the big fluctuant data.In this paper,the Weighted Least Square(WLS)method is used for the data fitting and compared with the OLS method.The nickel-based superalloy GH3030 and iron-based superalloy GH1140 are applied in the multi-pass cold spinning experiments.The residual stress distributions of normal,potential crack and wrinkle workpieces are discussed with the grain structure.The results show that WLS method has better goodness of fit compared with OLS method.The residual stress distributions have special relationship with potential crack,wrinkle workpiece and grain structure.
文摘Approximation methods are used in the analysis and prediction of data, especially laboratory data, in engineering projects. These methods are usually linear and are obtained by least-square-error approaches. There are many problems in which linear models cannot be applied. Because of that there are logarithmic, exponential and polynomial curve-fitting models. These nonlinear models have a limited application in engineering problems. The variation of most data is such that the nonlinearity cannot be approximated by the above approaches. These methods are also not applicable when there is a large amount of data. For these reasons, a method of piecewise cubic spline approximation has been developed. The model presented here is capable of following the local nonuniformity of data in order to obtain a good fit of a curve to the data. There is C1 continuity at the limits of the piecewise elements. The model is tested and examined with four problems here. The results show that the model can approximate highly nonlinear data efficiently.
