Cancer multidrug resistance(MDR)impairs the therapeutic efficacy of various chemotherapeutics.Novel approaches,particularly the development of MDR reversal agents,are critically needed to address this challenge.This s...Cancer multidrug resistance(MDR)impairs the therapeutic efficacy of various chemotherapeutics.Novel approaches,particularly the development of MDR reversal agents,are critically needed to address this challenge.This study demonstrates that tenacissoside I(TI),a compound isolated from Marsdenia tenacissima(Roxb.)Wight et Arn,traditionally used in clinical practice as an ethnic medicine for cancer treatment,exhibits significant MDR reversal effects in ABCB1-mediated MDR cancer cells.TI reversed the resistance of SW620/AD300 and KBV200 cells to doxorubicin(DOX)and paclitaxel(PAC)by downregulating ABCB1 expression and reducing ABCB1 drug transport function.Mechanistically,protein arginine methyltransferase 1(PRMT1),whose expression correlates with poor prognosis and shows positive association with both ABCB1 and EGFR expressions in tumor tissues,was differentially expressed in TI-treated SW620/AD300 cells.SW620/AD300 and KBV200 cells exhibited elevated levels of EGFR asymmetric dimethylarginine(aDMA)and enhanced PRMT1-EGFR interaction compared to their parental cells.Moreover,TI-induced PRMT1 downregulation impaired PRMT1-mediated aDMA of EGFR,PRMT1-EGFR interaction,and EGFR downstream signaling in SW620/AD300 and KBV200 cells.These effects were significantly reversed by PRMT1 overexpression.Additionally,TI demonstrated resistance reversal to PAC in xenograft models without detectable toxicities.This study establishes TI's MDR reversal effect in ABCB1-mediated MDR human cancer cells through inhibition of PRMT1-mediated aDMA of EGFR,suggesting TI's potential as an MDR modulator for improving chemotherapy outcomes.展开更多
Flexible piezoresistive pressure sensors can offer convenient detection of mechanical deformations for wearable electronics.Previous studies of flexible piezoresistive pressure sensors focus on the sensitivity but the...Flexible piezoresistive pressure sensors can offer convenient detection of mechanical deformations for wearable electronics.Previous studies of flexible piezoresistive pressure sensors focus on the sensitivity but the low-cost and self-powered sensors remain a challenge due to the deviation of resistance signal acquisition caused by thermoelectric voltage.Here,piezoresistive pressure sensors with ultralow Seebeck coefficient of-0.72μV/K based on carbon nanotubes(CNTs)/polyethyleneimine(PEI)/melamine(CPM)sponge are reported.Due to the diminished Seebeck effect,the CPM sponge pressure sensors successfully reduce the deviation to 18.75%and can keep stable sensitivity and resistance change under a very low working voltage and change temperature environment.The stable properties of the sensors make them successful to work for real-time sensing in self-powered wearable electronics.展开更多
Evaluation of backfilling effectiveness plays a crucial role in the geological environment management and restoration of abandoned open-pit quarries,providing a scientific basis for subsequent greening efforts.Backfil...Evaluation of backfilling effectiveness plays a crucial role in the geological environment management and restoration of abandoned open-pit quarries,providing a scientific basis for subsequent greening efforts.Backfill soil,predominantly composed of silty clay,demonstrates high water retention capacity and elevated moisture content,leading to a pronounced resistivity contrast with the bedrock exposed by quarrying activities.To investigate the distribution of backfill soil subsurface and assess backfilling effectiveness in the study area,this study conducted a comprehensive geophysical investigation utilizing the high-density electrical resistivity tomography(ERT).A total of 19 ERT survey lines were deployed across three distinct areas in Liuyao Village,Huaibei City,Anhui Province,China.The inversion results,derived from both two-dimensional(2D)and three-dimensional(3D),reveal distinct electrical properties of the subsurface materials:the backfill soil layer shows low resistivity features,the fill stone layer exhibits medium to high resistivity,and the bedrock shows the highest resistivity.The 2D inversion results,from the data measured using the Wenner array effectively capture the spatial distribution and structural features of the backfill soil layer.The findings indicate a gradual east-west thinning of the clay layer within the quarry.Furthermore,the northern pit area exhibits a uniform distribution of backfill soil layer,indicative of effective backfilling operations.In contrast,the southern pit area lacks a well-defined clay layer,suggesting suboptimal backfilling effectiveness.展开更多
Formation of multicomponent ceramics is one of the most promising strategies for enhancing the ablation resistance of ultra-high-temperature carbide ceramics(UHTCCs),while the effects of the elements are the foundatio...Formation of multicomponent ceramics is one of the most promising strategies for enhancing the ablation resistance of ultra-high-temperature carbide ceramics(UHTCCs),while the effects of the elements are the foundation.Here,we reported an elemental synergistic effect by investigating the ablation behavior of three components,including Zr_(1/2)Hf_(1/3)Ti_(1/6)C(ZHTi),Zr_(1/2)Hf_(1/3)Ta_(1/6)C(ZHTa),and Zr_(1/2)Hf_(1/3)Ti_(1/12)Ta_(1/12)C(ZHTT).Results indicate that the Ti-Ta synergistic effect enables ZHTT to exhibit a low recession rate(3.33μm/s)and linear expansion rate(2.00μm/s)of its oxide layer,attributable to enhanced self-healing capability and durable protection.During ablation,outward diffusion of Ti can heal the oxide layer,but results in severe consumption of UHTCCs.Although the low-volatility oxide formed by Ta can reduce the loss rate of the matrix,the negligible outward diffusion of Ta leads to the formation of a porous outer oxide layer.The co-addition of Ti and Ta simultaneously provides effective self-healing and low matrix recession,enabling enhanced ablation resistance of ZHTT.展开更多
Corrosion is an essential issue limiting the application of high-strength low-carbon steel in seawater environment. The impact of retained austenite on its corrosion behavior with immersion experiments and related cor...Corrosion is an essential issue limiting the application of high-strength low-carbon steel in seawater environment. The impact of retained austenite on its corrosion behavior with immersion experiments and related corrosion sensor technology was explored. A model that clarifies the micro-galvanic effect and the heat-induced changes to the shape and composition of retained austenite was used to discuss the findings. The results indicated that retained austenite was generated following an intercritical process and demonstrated approximately 48 mV higher Volta potential than the matrix. The retained austenite content first increased and then decreased with increasing intercritical temperatures, while reaching the maximum value of 8.5% at 660℃. With the increase in retained austenite content, the corrosion rate was increased by up to 32.8% compared to “quenching + tempering” (QT) specimen. The interfaces between the retained austenite and matrix were the priority nucleation sites for corrosion. Moreover, the retained austenite reduced the corrosion resistance of the steel by increasing the micro-galvanic effect and reducing rust layer compactness.展开更多
To elucidate the yielding performance of compact yielding anchor cables in working state,a yielding mechanical model incorporating extrusion friction and fastening rotation under confining pressure is constructed.The ...To elucidate the yielding performance of compact yielding anchor cables in working state,a yielding mechanical model incorporating extrusion friction and fastening rotation under confining pressure is constructed.The yielding resistance enhancement effect(ω)caused by working environment constraints is evaluated through multi-layer composite sleeve hole expansion analysis,forming a theoretical framework for calculating the working yielding force.Laboratory and in-situ pull-out tests are conducted to determine the yielding performance and validate the analytical theory.The main conclusions are:(1)Yielding force and energy-release capacity increase withω,significantly outperforming the unconfined state.(2)In-situ tests under varying rockmass and geostress conditions(F1–F3)determine the yielding force increases to 183.4–290.1,204.0–290.8,and 235.0–327.1 kN.(3)The slight deviation(–12.5%to 6.2%)between the theoretical and measured yielding force confirms that the analytical theory effectively describes the working yielding performance.(4)ωincreases with higher geostress and improved rock mechanical properties,with initial geostress(σ_(0))and elastic modulus of surrounding rock(E_(3))identified as critical parameters.展开更多
The magnetic properties and Kondo effect in Ce3TiBi5 with a quasi-one-dimensional structure were investigated using in situ high-pressure resistivity measurements up to 48 GPa.At ambient pressure,Ce_(3)TiBi_(5) underg...The magnetic properties and Kondo effect in Ce3TiBi5 with a quasi-one-dimensional structure were investigated using in situ high-pressure resistivity measurements up to 48 GPa.At ambient pressure,Ce_(3)TiBi_(5) undergoes an antiferromagnetic(AFM)transition at T_(N)∼5 K.Under high pressures within 8.9 GPa,we find that Kondo scattering contributes differently to the high-temperature resistance,R(T),depending on the applied current direction,demonstrating a significantly anisotropic Kondo effect.The complete P–T phase diagram has been constructed,in which the pressure dependence of T_(N) exhibits a dome-like shape.The AFM order remains robust under pressure,even when the coherence temperature T^(*) far exceeds 300 K.We attribute the observed anisotropic Kondo effect and the robust AFM to the underlying anisotropy in electronic hybridization under high pressure.展开更多
Cu/HfOx/n^＋Si devices are fabricated to investigate the influence of technological parameters including film thickness and Ar/02 ratio on the resistive switching （RS） characteristics of HfOx films, in terms of swit...Cu/HfOx/n^＋Si devices are fabricated to investigate the influence of technological parameters including film thickness and Ar/02 ratio on the resistive switching （RS） characteristics of HfOx films, in terms of switch ratio, endurance properties, retention time and multilevel storage. It is revealed that the RS characteristics show strong dependence on technological parameters mainly by altering the defects （oxygen vacancies） in the film. The sample with thickness of 2Onto and Ar/O2 ratio of 12：3 exhibits the best RS behavior with the potential of multilevel storage. The conduction mechanism of all the films is interpreted based on the filamentary model.展开更多
Four mineral admixture concrete specimens werefabricated to study the negative effect improvements ofaccelerated curing on the chloride penetration resistance ofordinary concrete. After reaching different initial stre...Four mineral admixture concrete specimens werefabricated to study the negative effect improvements ofaccelerated curing on the chloride penetration resistance ofordinary concrete. After reaching different initial strengths, the specimens were placed in 40, 60, or 80 t water tanks foraccelerated curing. The Coulomb values of the specimens weemeasured with ASTM C1202 experiment at 28, 100, 200, ad300 d. Partial specimens were also selected for rapid chlorideion migration coefficient and mercury intrusion porosimetryexperiments. The experimental results show that theaccelerated curing for ordinary concrete linealy deterioratesthe chloride penetration resistance, whereas the incorporationof mineral admixtures improves the concrete microscopic pore-structures and negative effects. An upper temperature limit of60 t of the accelerated curing is suitable for obtainingsuperior chloride penetration resistance for the mineraladmixture concrete. Pre-curing at a normal temperature of 20t is beneficial for improving the negative effect, which isalso aieviated with increasing testing age as a result of thesuccessive hydration of binder materials in concrete.展开更多
In this article, a numerical model combining conduction and radiation is developed based on two flux approximation to predict the heat transfer behavior of fibrous insulation used in thermal protection systems. Monte ...In this article, a numerical model combining conduction and radiation is developed based on two flux approximation to predict the heat transfer behavior of fibrous insulation used in thermal protection systems. Monte Carlo method is utilized to determine the modified radiative properties with experimentally measured transient external temperature as high as 1 000 K. It is found that the estimated radiative properties become time-independent after about t = 3 000 s. By comparing the predicted to the measured results in transient state, the contact resistance exerts significant influences upon the temperature distribution in the specimen. Results show that the averaged absolute deviation is 3.25% when contact resistance is neglected in heat transfer model, while 1.82% with no contact resistance.展开更多
The microstructural evolutions under as-homogenized and as-deformed conditions and after the postdeformation annealing of AA6082 aluminum alloys with different Mn content(0.05 wt.%-1 wt.%)were studied by optical,scann...The microstructural evolutions under as-homogenized and as-deformed conditions and after the postdeformation annealing of AA6082 aluminum alloys with different Mn content(0.05 wt.%-1 wt.%)were studied by optical,scanning electron,and transmission electron microscopies.The results showed that the presence of a large amount ofα-Al(Mn,Fe)Si dispersoids induced by Mn addition significantly improved the recrystallization resistance.In the base alloy free of Mn,static recrystallization occurred after 2 h of annealing,and grain growth commenced after 4 h of annealing,whereas in Mn-containing alloys,the recovered grain structure was well-retained after even 8 h of annealing.The alloy with 0.5%Mn exhibited the best recrystallization resistance,and a further increase of the Mn levels to 1%resulted in a gradual reduction of the recrystallization resistance,the reason for which was that recrystallization occurred only in the dispersoid-free zones(DFZs)and the increased DFZ fraction with Mn content led to an increase in the recrystallization fraction.The variation in the dispersoid number density and a coarsening of dispersoids during annealing have a limited influence on the static recrystallization in Mn-containing alloys.展开更多
Based on the thermal network of the two-dimensional heterojunction bipolar transistors(HBTs) array, the thermal resistance matrix is presented, including the self-heating thermal resistance and thermal coupling resist...Based on the thermal network of the two-dimensional heterojunction bipolar transistors(HBTs) array, the thermal resistance matrix is presented, including the self-heating thermal resistance and thermal coupling resistance to describe the self-heating and thermal coupling effects, respectively.For HBT cells along the emitter length direction, the thermal coupling resistance is far smaller than the self-heating thermal resistance, and the peak junction temperature is mainly determined by the self-heating thermal resistance.However, the thermal coupling resistance is in the same order with the self-heating thermal resistance for HBT cells along the emitter width direction.Furthermore, the dependence of the thermal resistance matrix on cell spacing along the emitter length direction and cell spacing along the emitter width direction is also investigated, respectively.It is shown that the moderate increase of cell spacings along the emitter length direction and the emitter width direction could effectively lower the self-heating thermal resistance and thermal coupling resistance,and hence the peak junction temperature is decreased, which sheds light on adopting a two-dimensional non-uniform cell spacing layout to improve the uneven temperature distribution.By taking a 2 × 6 HBTs array for example, a twodimensional non-uniform cell spacing layout is designed, which can effectively lower the peak junction temperature and reduce the non-uniformity of the dissipated power.For the HBTs array with optimized layout, the high power-handling capability and thermal dissipation capability are kept when the bias voltage increases.展开更多
Overweight or obesity has become a serious public health problem in the world, scientists are concentrating their efforts on exploring novel ways to treat obesity. Nowadays, the availabilities of bariatric surgery and...Overweight or obesity has become a serious public health problem in the world, scientists are concentrating their efforts on exploring novel ways to treat obesity. Nowadays, the availabilities of bariatric surgery and pharmacotherapy have enhanced obesity treatment, but it should has support from diet, physical exercise and lifestyle modification, especially the functional food. Resistant starch, an indigestible starch, has been studied for years for its beneficial effects on regulating blood glucose level and lipid metabolism. The aim of this review is to summarize the effect of resistant starch on weight loss and the possible mechanisms. According to numerous previous studies it could be concluded that resistant starch can reduce fat accumulation, enhance insulin sensitivity, regulate blood glucose level and lipid metabolism. Recent investigations have focused on the possible associations between resistant starch and incretins as well as gut microbiota. Resistant starch seems to be a promising dietary fiber for the prevention or treatment of obesity and its related diseases.展开更多
Nitriding is employed for the hard Fe electrodeposition to produce a hard-facing and antiwear coating. It only takes 1 h for the hard Fe coating, which is much shorter than nitriding the Fe and steel. The results show...Nitriding is employed for the hard Fe electrodeposition to produce a hard-facing and antiwear coating. It only takes 1 h for the hard Fe coating, which is much shorter than nitriding the Fe and steel. The results showed that the nitriding can increase the microhardness, wear resistance of the coating, as well as the bonding strength of the coating with the substrate. Additionally it can eliminate the brittleness, turn the internal stress of the coating from tension to compression. The wear resistance of the nitrided Fe coating is 4.6 times as high as that of Cr coating. It is simple and economic to combine hard Fe electroplating and nitriding, which is a good technology of the tribological surface modification.展开更多
We consider a nonlinear hyperbolic system of two conservation laws which arises in ideal magnetohydrodynamics and includes second-order terms accounting for magnetic resistivity and Hall effect. We show that the initi...We consider a nonlinear hyperbolic system of two conservation laws which arises in ideal magnetohydrodynamics and includes second-order terms accounting for magnetic resistivity and Hall effect. We show that the initial value problem for this model may lead to solutions exhibiting complex wave structures, including undercompressive nonclassical shock waves. We investigate numerically the subtle competition that takes place between the hyperbolic, diffusive, and dispersive parts of the system. Following Abeyratne, Knowles, LeFloch, and Truskinovsky, who studied similar questions arising in fluid and solid flows, we determine the associated kinetic function which characterizes the dynamics of undereompressive shocks driven by resistivity and Hall effect. To this end, we design a new class of ＂schemes with eontroled dissipation＂, following recent work by LeFloch and Mohammadian. It is now recognized that the equivalent equation associated with a scheme provides a guideline to design schemes that capture physically relevant, nonclassical shocks. We propose a new class of schemes based on high-order entropy conservative, finite differences for the hyperbolic flux, and high-order central differences for the resistivity and Hall terms. These schemes are tested for several regimes of （co-planar or not） initial data and parameter values, and allow us to analyze the properties of nonclassical shocks and establish the existence of monotone kinetic functions in magnetohydrodynamics.展开更多
An analytical expression for the co/lector resistance of a novel vertical SiGe heterojunction bipolar transistor （HBT） on thin film silicon-on-insulator （SOI） is obtained with the substrate bias effects being cons...An analytical expression for the co/lector resistance of a novel vertical SiGe heterojunction bipolar transistor （HBT） on thin film silicon-on-insulator （SOI） is obtained with the substrate bias effects being considered. The resistance is found to decrease slowly and then quickly and to have kinks with the increase of the substrate-collector bias, which is quite different from that of a conventional bulk HBT. The model is consistent with the simulation result and the reported data and is useful to the frequency characteristic design of 0.13 μtm millimeter-wave SiGe SOI BiCMOS devices.展开更多
Female Wister rats aged 8 weeks were randomly divided into sham operation group, ovariectomized （OVX） control group, and 20VX groups fed with soy isoflavone crude extract supplementation. The rats had free access to...Female Wister rats aged 8 weeks were randomly divided into sham operation group, ovariectomized （OVX） control group, and 20VX groups fed with soy isoflavone crude extract supplementation. The rats had free access to high fat diet and water for 9 weeks. No significant difference was found in body weight （BW）, total abdominal fat, food intake and food utilization rate between OVX control group and 20VX groups. However, the fasting blood glucose and blood lipid levels were significantly higher in 20VX groups than in OVX control group （P〈0.05）. Intraperitoneal glucose tolerance test （IGTI＂） showed that the area under AUC was smaller in 20VX groups than in OVX control group （P〈0.05）. These findings showed that soy isoflavone crude extract supplementation can improve glucose tolerance and prevent high fat diet-induced insulin resistance in ovariectomized rats.展开更多
Background:Polymethoxylatedflavones(PMFs)are compounds present in citrus peels and other Rutaceae plants,which exhibit diverse biological activities,including robust antitumor and antioxidant effects.However,the mechan...Background:Polymethoxylatedflavones(PMFs)are compounds present in citrus peels and other Rutaceae plants,which exhibit diverse biological activities,including robust antitumor and antioxidant effects.However,the mechanism of PMFs in reversing drug resistance to colon cancer remains unknown.In the present study,we aimed to investigate the potential connection between the aerobic glycolysis-ROS-autophagy signaling axis and the reversal of PTX resistance in colon cancer by PMFs.Methods:MTT Cell viability assay and colony formation assay were used to investigate the effect of PMFs combined with PTX in reversing HCT8/T cell resistance ex vivo;the mRNA and protein levels of the target were detected by SDS-PAGE(sodium dodecyl sulfate-polyacrylamide gel electrophoresis),quantitative real-timefluorescence polymerase chain reaction(qRT-PCR)and Western blot protein immunoblotting(WB);An HCT8/T cell xenograft model was established to investigate the MDR reversal activity of PMFs in vivo;The extracellular acidification rate(ECAR)and the oxygen consumption rate(OCR)were detected to assess the cellular oxygen consumption rate and glycolytic process.Results:HCT8/T cells demonstrated significant resistance to PTX,up-regulating the expression levels of ABCB1 mRNA,P-gp,LC3-I,and LC3-II protein,and increasing intracellular reactive oxygen species(ROS)content.PMFs mainly contain two active ingredients,nobiletin,and tangeretin,which were able to reverse drug resistance in HCT8/T cells in a concentration-dependent manner.PMFs exhibited high tolerance in the HCT8/T nude mouse model while increasing the sensitivity of PTX-resistant cells and suppressing tumor growth significantly.PMFs combined with PTX reduced extracellular acidification rate(ECAR)and oxygen consumption rate(OCR)in HCT8/T cells.Additionally,PMFs reduced intracellular ROS content,down-regulated the expression levels of autophagy-related proteins LC3-I,LC3-II,Beclin1,and ATG7,and significantly reduced the number of autophagosomes in HCT8/T cells.Conclusions:The present study demonstrated that PMFs could potentially reverse PTX resistance in colon cancer by regulating the aerobic glycolysis-ROS-autophagy signaling axis,which indicated that PMFs would be potential potentiators for future chemotherapeutic agents in colon cancer.展开更多
The effects of three different typical resistivity models（Spitzer, Z＆L and M＆G） on the performance of pulsed inductive acceleration plasma are studied. Numerical results show that their influences decrease with th...The effects of three different typical resistivity models（Spitzer, Z＆L and M＆G） on the performance of pulsed inductive acceleration plasma are studied. Numerical results show that their influences decrease with the increase of the plasma temperature. The significant discriminations among them appear at the plasma temperature lower than 2.5 eV, and the maximum gap of the pulsed inductive plasma accelerated efficiency is approximately 2.5%.Moreover, the pulsed inductive plasma accelerated efficiency is absolutely related to the dynamic impedance parameters, such as voltage, inductance, capacitance and flow rate. However, the distribution of the efficiency as a function of plasma temperature with three resistivity models has nothing to do with the dynamic impedance parameter.展开更多
The woven glass fiber reinforced composites(GFRP)subjected to high-speed impact is investigated to identify the hygrothermal aging effect on the impact resistance.Both the hygrothermal aged and unaged glass/epoxy lami...The woven glass fiber reinforced composites(GFRP)subjected to high-speed impact is investigated to identify the hygrothermal aging effect on the impact resistance.Both the hygrothermal aged and unaged glass/epoxy laminates are subjected to different impact velocities,which is confirmed as a sensitive factor for the failure modes and mechanisms.The results show the hygrothermal aging effect decreases the ballistic limit by 14.9%,but the influence on ballistic performance is limited within the impact velocity closed to the ballistic limit.The failure modes and energy dissipation mechanisms are confirmed to be slightly influenced by the hygrothermal aging effect.The hygrothermal aging effect induced localization of structural deformation and degradation of mechanical properties are the main reasons for the composite undergoing the same failure modes at smaller impact velocities.Based on the energy absorption mechanisms,analytical expressions predict the ballistic limit and energy absorption to reasonable accuracy,the underestimated total energy absorption results in a relatively poor agreement between the measured and predicted energy absorption efficiency.展开更多
基金supported by the National Natural Science Foundation of China(Nos.82274211 and 82474190)the Natural Science Foundation of Tianjin(Nos.24JCZDJC00120 and 24PTLYHZ00280)Liaoning Provincial Department of Education Basic Research Projects for Higher Education Institutions(No.LJ212510163021)。
文摘Cancer multidrug resistance(MDR)impairs the therapeutic efficacy of various chemotherapeutics.Novel approaches,particularly the development of MDR reversal agents,are critically needed to address this challenge.This study demonstrates that tenacissoside I(TI),a compound isolated from Marsdenia tenacissima(Roxb.)Wight et Arn,traditionally used in clinical practice as an ethnic medicine for cancer treatment,exhibits significant MDR reversal effects in ABCB1-mediated MDR cancer cells.TI reversed the resistance of SW620/AD300 and KBV200 cells to doxorubicin(DOX)and paclitaxel(PAC)by downregulating ABCB1 expression and reducing ABCB1 drug transport function.Mechanistically,protein arginine methyltransferase 1(PRMT1),whose expression correlates with poor prognosis and shows positive association with both ABCB1 and EGFR expressions in tumor tissues,was differentially expressed in TI-treated SW620/AD300 cells.SW620/AD300 and KBV200 cells exhibited elevated levels of EGFR asymmetric dimethylarginine(aDMA)and enhanced PRMT1-EGFR interaction compared to their parental cells.Moreover,TI-induced PRMT1 downregulation impaired PRMT1-mediated aDMA of EGFR,PRMT1-EGFR interaction,and EGFR downstream signaling in SW620/AD300 and KBV200 cells.These effects were significantly reversed by PRMT1 overexpression.Additionally,TI demonstrated resistance reversal to PAC in xenograft models without detectable toxicities.This study establishes TI's MDR reversal effect in ABCB1-mediated MDR human cancer cells through inhibition of PRMT1-mediated aDMA of EGFR,suggesting TI's potential as an MDR modulator for improving chemotherapy outcomes.
基金Fundamental Research Fund for the Central Universities,China(Nos.2232020G-01 and 19D110106)Young Elite Scientists Sponsorship Program by China Association for Science and Technology,China(No.2017QNRC001)Graduate Student Innovation Fund of Donghua University,China(No.20D310111)。
文摘Flexible piezoresistive pressure sensors can offer convenient detection of mechanical deformations for wearable electronics.Previous studies of flexible piezoresistive pressure sensors focus on the sensitivity but the low-cost and self-powered sensors remain a challenge due to the deviation of resistance signal acquisition caused by thermoelectric voltage.Here,piezoresistive pressure sensors with ultralow Seebeck coefficient of-0.72μV/K based on carbon nanotubes(CNTs)/polyethyleneimine(PEI)/melamine(CPM)sponge are reported.Due to the diminished Seebeck effect,the CPM sponge pressure sensors successfully reduce the deviation to 18.75%and can keep stable sensitivity and resistance change under a very low working voltage and change temperature environment.The stable properties of the sensors make them successful to work for real-time sensing in self-powered wearable electronics.
基金Supported by National Key Research and Development Program of China(No.2023YFC3707901)。
文摘Evaluation of backfilling effectiveness plays a crucial role in the geological environment management and restoration of abandoned open-pit quarries,providing a scientific basis for subsequent greening efforts.Backfill soil,predominantly composed of silty clay,demonstrates high water retention capacity and elevated moisture content,leading to a pronounced resistivity contrast with the bedrock exposed by quarrying activities.To investigate the distribution of backfill soil subsurface and assess backfilling effectiveness in the study area,this study conducted a comprehensive geophysical investigation utilizing the high-density electrical resistivity tomography(ERT).A total of 19 ERT survey lines were deployed across three distinct areas in Liuyao Village,Huaibei City,Anhui Province,China.The inversion results,derived from both two-dimensional(2D)and three-dimensional(3D),reveal distinct electrical properties of the subsurface materials:the backfill soil layer shows low resistivity features,the fill stone layer exhibits medium to high resistivity,and the bedrock shows the highest resistivity.The 2D inversion results,from the data measured using the Wenner array effectively capture the spatial distribution and structural features of the backfill soil layer.The findings indicate a gradual east-west thinning of the clay layer within the quarry.Furthermore,the northern pit area exhibits a uniform distribution of backfill soil layer,indicative of effective backfilling operations.In contrast,the southern pit area lacks a well-defined clay layer,suggesting suboptimal backfilling effectiveness.
基金supported by the National Natural Science Foundation of China grant numbers[52072410].
文摘Formation of multicomponent ceramics is one of the most promising strategies for enhancing the ablation resistance of ultra-high-temperature carbide ceramics(UHTCCs),while the effects of the elements are the foundation.Here,we reported an elemental synergistic effect by investigating the ablation behavior of three components,including Zr_(1/2)Hf_(1/3)Ti_(1/6)C(ZHTi),Zr_(1/2)Hf_(1/3)Ta_(1/6)C(ZHTa),and Zr_(1/2)Hf_(1/3)Ti_(1/12)Ta_(1/12)C(ZHTT).Results indicate that the Ti-Ta synergistic effect enables ZHTT to exhibit a low recession rate(3.33μm/s)and linear expansion rate(2.00μm/s)of its oxide layer,attributable to enhanced self-healing capability and durable protection.During ablation,outward diffusion of Ti can heal the oxide layer,but results in severe consumption of UHTCCs.Although the low-volatility oxide formed by Ta can reduce the loss rate of the matrix,the negligible outward diffusion of Ta leads to the formation of a porous outer oxide layer.The co-addition of Ti and Ta simultaneously provides effective self-healing and low matrix recession,enabling enhanced ablation resistance of ZHTT.
文摘Corrosion is an essential issue limiting the application of high-strength low-carbon steel in seawater environment. The impact of retained austenite on its corrosion behavior with immersion experiments and related corrosion sensor technology was explored. A model that clarifies the micro-galvanic effect and the heat-induced changes to the shape and composition of retained austenite was used to discuss the findings. The results indicated that retained austenite was generated following an intercritical process and demonstrated approximately 48 mV higher Volta potential than the matrix. The retained austenite content first increased and then decreased with increasing intercritical temperatures, while reaching the maximum value of 8.5% at 660℃. With the increase in retained austenite content, the corrosion rate was increased by up to 32.8% compared to “quenching + tempering” (QT) specimen. The interfaces between the retained austenite and matrix were the priority nucleation sites for corrosion. Moreover, the retained austenite reduced the corrosion resistance of the steel by increasing the micro-galvanic effect and reducing rust layer compactness.
基金supported by the National Natural Science Foundation of China(Nos.U2468217,U2034205,and 52308391)。
文摘To elucidate the yielding performance of compact yielding anchor cables in working state,a yielding mechanical model incorporating extrusion friction and fastening rotation under confining pressure is constructed.The yielding resistance enhancement effect(ω)caused by working environment constraints is evaluated through multi-layer composite sleeve hole expansion analysis,forming a theoretical framework for calculating the working yielding force.Laboratory and in-situ pull-out tests are conducted to determine the yielding performance and validate the analytical theory.The main conclusions are:(1)Yielding force and energy-release capacity increase withω,significantly outperforming the unconfined state.(2)In-situ tests under varying rockmass and geostress conditions(F1–F3)determine the yielding force increases to 183.4–290.1,204.0–290.8,and 235.0–327.1 kN.(3)The slight deviation(–12.5%to 6.2%)between the theoretical and measured yielding force confirms that the analytical theory effectively describes the working yielding performance.(4)ωincreases with higher geostress and improved rock mechanical properties,with initial geostress(σ_(0))and elastic modulus of surrounding rock(E_(3))identified as critical parameters.
基金supported by the National Key Research and Development Program of Chinathe National Natural Science Foundation of China (Grant Nos.2024YFA1408000,12474097,and2023YFA1406001)+2 种基金the Guangdong Provincial Quantum Science Strategic Initiative (Grant No.GDZX2201001)the Center for Computational Science and Engineering at Southern University of Science and Technology,the Major Science and Technology Infrastructure Project of Material Genome Big-science Facilities Platform supported by Municipal Development and Reform Commission of Shenzhen(for J.L.Z.and Y.L.)the Chinese funding sources applied via HPSTAR。
文摘The magnetic properties and Kondo effect in Ce3TiBi5 with a quasi-one-dimensional structure were investigated using in situ high-pressure resistivity measurements up to 48 GPa.At ambient pressure,Ce_(3)TiBi_(5) undergoes an antiferromagnetic(AFM)transition at T_(N)∼5 K.Under high pressures within 8.9 GPa,we find that Kondo scattering contributes differently to the high-temperature resistance,R(T),depending on the applied current direction,demonstrating a significantly anisotropic Kondo effect.The complete P–T phase diagram has been constructed,in which the pressure dependence of T_(N) exhibits a dome-like shape.The AFM order remains robust under pressure,even when the coherence temperature T^(*) far exceeds 300 K.We attribute the observed anisotropic Kondo effect and the robust AFM to the underlying anisotropy in electronic hybridization under high pressure.
基金Supported by the National Natural Science Foundation of China under Grant No 51202196the National Aerospace Science Foundation of China under Grant No 2013ZF53067+2 种基金the Natural Science Basic Research Plan in Shaanxi Province of China under Grant No 2014JQ6204the Fundamental Research Funds for the Central Universities under Grant No 3102014JCQ01032the 111 Project under Grant No B08040
文摘Cu/HfOx/n^＋Si devices are fabricated to investigate the influence of technological parameters including film thickness and Ar/02 ratio on the resistive switching （RS） characteristics of HfOx films, in terms of switch ratio, endurance properties, retention time and multilevel storage. It is revealed that the RS characteristics show strong dependence on technological parameters mainly by altering the defects （oxygen vacancies） in the film. The sample with thickness of 2Onto and Ar/O2 ratio of 12：3 exhibits the best RS behavior with the potential of multilevel storage. The conduction mechanism of all the films is interpreted based on the filamentary model.
基金The National Natural Science Foundation of China(No.51178455)the Transformation Program of Science and Technology Achievements of Jiangsu Province(No.BA2015133)
文摘Four mineral admixture concrete specimens werefabricated to study the negative effect improvements ofaccelerated curing on the chloride penetration resistance ofordinary concrete. After reaching different initial strengths, the specimens were placed in 40, 60, or 80 t water tanks foraccelerated curing. The Coulomb values of the specimens weemeasured with ASTM C1202 experiment at 28, 100, 200, ad300 d. Partial specimens were also selected for rapid chlorideion migration coefficient and mercury intrusion porosimetryexperiments. The experimental results show that theaccelerated curing for ordinary concrete linealy deterioratesthe chloride penetration resistance, whereas the incorporationof mineral admixtures improves the concrete microscopic pore-structures and negative effects. An upper temperature limit of60 t of the accelerated curing is suitable for obtainingsuperior chloride penetration resistance for the mineraladmixture concrete. Pre-curing at a normal temperature of 20t is beneficial for improving the negative effect, which isalso aieviated with increasing testing age as a result of thesuccessive hydration of binder materials in concrete.
基金National High-tech Research and Development Program(2006AA705317)
文摘In this article, a numerical model combining conduction and radiation is developed based on two flux approximation to predict the heat transfer behavior of fibrous insulation used in thermal protection systems. Monte Carlo method is utilized to determine the modified radiative properties with experimentally measured transient external temperature as high as 1 000 K. It is found that the estimated radiative properties become time-independent after about t = 3 000 s. By comparing the predicted to the measured results in transient state, the contact resistance exerts significant influences upon the temperature distribution in the specimen. Results show that the averaged absolute deviation is 3.25% when contact resistance is neglected in heat transfer model, while 1.82% with no contact resistance.
基金financially supported by the Natural Sciences and Engineering Research Council of Canada(No.CRDPJ 51465117)Rio Tinto Aluminum through the Research Chair in the Metallurgy of Aluminum Transformation at University of Quebec at Chicoutimi。
文摘The microstructural evolutions under as-homogenized and as-deformed conditions and after the postdeformation annealing of AA6082 aluminum alloys with different Mn content(0.05 wt.%-1 wt.%)were studied by optical,scanning electron,and transmission electron microscopies.The results showed that the presence of a large amount ofα-Al(Mn,Fe)Si dispersoids induced by Mn addition significantly improved the recrystallization resistance.In the base alloy free of Mn,static recrystallization occurred after 2 h of annealing,and grain growth commenced after 4 h of annealing,whereas in Mn-containing alloys,the recovered grain structure was well-retained after even 8 h of annealing.The alloy with 0.5%Mn exhibited the best recrystallization resistance,and a further increase of the Mn levels to 1%resulted in a gradual reduction of the recrystallization resistance,the reason for which was that recrystallization occurred only in the dispersoid-free zones(DFZs)and the increased DFZ fraction with Mn content led to an increase in the recrystallization fraction.The variation in the dispersoid number density and a coarsening of dispersoids during annealing have a limited influence on the static recrystallization in Mn-containing alloys.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61006059 and 61774012)Beijing Municipal Natural Science Foundation,China(Grant No.4143059)+3 种基金Beijing Municipal Education Committee,China(Grant No.KM201710005027)Postdoctoral Science Foundation of Beijing,China(Grant No.2015ZZ-11)China Postdoctoral Science Foundation(Grant No.2015M580951)Scientific Research Foundation Project of Beijing Future Chip Technology Innovation Center,China(Grant No.KYJJ2016008)
文摘Based on the thermal network of the two-dimensional heterojunction bipolar transistors(HBTs) array, the thermal resistance matrix is presented, including the self-heating thermal resistance and thermal coupling resistance to describe the self-heating and thermal coupling effects, respectively.For HBT cells along the emitter length direction, the thermal coupling resistance is far smaller than the self-heating thermal resistance, and the peak junction temperature is mainly determined by the self-heating thermal resistance.However, the thermal coupling resistance is in the same order with the self-heating thermal resistance for HBT cells along the emitter width direction.Furthermore, the dependence of the thermal resistance matrix on cell spacing along the emitter length direction and cell spacing along the emitter width direction is also investigated, respectively.It is shown that the moderate increase of cell spacings along the emitter length direction and the emitter width direction could effectively lower the self-heating thermal resistance and thermal coupling resistance,and hence the peak junction temperature is decreased, which sheds light on adopting a two-dimensional non-uniform cell spacing layout to improve the uneven temperature distribution.By taking a 2 × 6 HBTs array for example, a twodimensional non-uniform cell spacing layout is designed, which can effectively lower the peak junction temperature and reduce the non-uniformity of the dissipated power.For the HBTs array with optimized layout, the high power-handling capability and thermal dissipation capability are kept when the bias voltage increases.
基金supported by the National Natural Science Foundation major international(regional)joint research project(81220108006)to WJYoung Scientists Fund of National Natural Science Foundation(81200292),Young Scientists Fund of National Natural Science Foundation(81200655)to LSShanghai Rising-Star Program(13QA1402900)and Hong Kong Scholars Program(XJ2013035)to HL
文摘Overweight or obesity has become a serious public health problem in the world, scientists are concentrating their efforts on exploring novel ways to treat obesity. Nowadays, the availabilities of bariatric surgery and pharmacotherapy have enhanced obesity treatment, but it should has support from diet, physical exercise and lifestyle modification, especially the functional food. Resistant starch, an indigestible starch, has been studied for years for its beneficial effects on regulating blood glucose level and lipid metabolism. The aim of this review is to summarize the effect of resistant starch on weight loss and the possible mechanisms. According to numerous previous studies it could be concluded that resistant starch can reduce fat accumulation, enhance insulin sensitivity, regulate blood glucose level and lipid metabolism. Recent investigations have focused on the possible associations between resistant starch and incretins as well as gut microbiota. Resistant starch seems to be a promising dietary fiber for the prevention or treatment of obesity and its related diseases.
文摘Nitriding is employed for the hard Fe electrodeposition to produce a hard-facing and antiwear coating. It only takes 1 h for the hard Fe coating, which is much shorter than nitriding the Fe and steel. The results showed that the nitriding can increase the microhardness, wear resistance of the coating, as well as the bonding strength of the coating with the substrate. Additionally it can eliminate the brittleness, turn the internal stress of the coating from tension to compression. The wear resistance of the nitrided Fe coating is 4.6 times as high as that of Cr coating. It is simple and economic to combine hard Fe electroplating and nitriding, which is a good technology of the tribological surface modification.
基金The first author (PLF) was partially supported by the Centre National de la Recherche Scientifique (CNRS) the Agence Nationale de la Recherche (ANR)
文摘We consider a nonlinear hyperbolic system of two conservation laws which arises in ideal magnetohydrodynamics and includes second-order terms accounting for magnetic resistivity and Hall effect. We show that the initial value problem for this model may lead to solutions exhibiting complex wave structures, including undercompressive nonclassical shock waves. We investigate numerically the subtle competition that takes place between the hyperbolic, diffusive, and dispersive parts of the system. Following Abeyratne, Knowles, LeFloch, and Truskinovsky, who studied similar questions arising in fluid and solid flows, we determine the associated kinetic function which characterizes the dynamics of undereompressive shocks driven by resistivity and Hall effect. To this end, we design a new class of ＂schemes with eontroled dissipation＂, following recent work by LeFloch and Mohammadian. It is now recognized that the equivalent equation associated with a scheme provides a guideline to design schemes that capture physically relevant, nonclassical shocks. We propose a new class of schemes based on high-order entropy conservative, finite differences for the hyperbolic flux, and high-order central differences for the resistivity and Hall terms. These schemes are tested for several regimes of （co-planar or not） initial data and parameter values, and allow us to analyze the properties of nonclassical shocks and establish the existence of monotone kinetic functions in magnetohydrodynamics.
基金Project supported by National Ministries and Commissions(Grant Nos.51308040203 and 6139801)the Fundamental Research Funds for the Central Universities,China(Grant Nos.72105499 and 72104089)the Natural Science Basic Research Plan in Shaanxi Province of China(Grant No.2010JQ8008)
文摘An analytical expression for the co/lector resistance of a novel vertical SiGe heterojunction bipolar transistor （HBT） on thin film silicon-on-insulator （SOI） is obtained with the substrate bias effects being considered. The resistance is found to decrease slowly and then quickly and to have kinks with the increase of the substrate-collector bias, which is quite different from that of a conventional bulk HBT. The model is consistent with the simulation result and the reported data and is useful to the frequency characteristic design of 0.13 μtm millimeter-wave SiGe SOI BiCMOS devices.
基金supported by the National Natural Science Foundation of China(30972439)Bureau of Health Foundation,Heilongjiang Province(2006-300),(2012-768)Youth Fund of School of Public Health,HMU
文摘Female Wister rats aged 8 weeks were randomly divided into sham operation group, ovariectomized （OVX） control group, and 20VX groups fed with soy isoflavone crude extract supplementation. The rats had free access to high fat diet and water for 9 weeks. No significant difference was found in body weight （BW）, total abdominal fat, food intake and food utilization rate between OVX control group and 20VX groups. However, the fasting blood glucose and blood lipid levels were significantly higher in 20VX groups than in OVX control group （P〈0.05）. Intraperitoneal glucose tolerance test （IGTI＂） showed that the area under AUC was smaller in 20VX groups than in OVX control group （P〈0.05）. These findings showed that soy isoflavone crude extract supplementation can improve glucose tolerance and prevent high fat diet-induced insulin resistance in ovariectomized rats.
基金supported by National Natural Science Foundation of China(82104446)Guangdong Basic and Applied Basic Research Foundation(2023A1515011961)+3 种基金Guangdong Province Characteristic Innovation Project of Universities(2022KTSCX100)Guangzhou University(College)-(High Level University/Deng feng Hospital)Basic and Applied Basic Research Project(2023A03J0397)Guangdong Medical Science and Technology Research Foundation(A2023460)Plan on Enhancing Scientific Research in GMU(2024SRP117).
文摘Background:Polymethoxylatedflavones(PMFs)are compounds present in citrus peels and other Rutaceae plants,which exhibit diverse biological activities,including robust antitumor and antioxidant effects.However,the mechanism of PMFs in reversing drug resistance to colon cancer remains unknown.In the present study,we aimed to investigate the potential connection between the aerobic glycolysis-ROS-autophagy signaling axis and the reversal of PTX resistance in colon cancer by PMFs.Methods:MTT Cell viability assay and colony formation assay were used to investigate the effect of PMFs combined with PTX in reversing HCT8/T cell resistance ex vivo;the mRNA and protein levels of the target were detected by SDS-PAGE(sodium dodecyl sulfate-polyacrylamide gel electrophoresis),quantitative real-timefluorescence polymerase chain reaction(qRT-PCR)and Western blot protein immunoblotting(WB);An HCT8/T cell xenograft model was established to investigate the MDR reversal activity of PMFs in vivo;The extracellular acidification rate(ECAR)and the oxygen consumption rate(OCR)were detected to assess the cellular oxygen consumption rate and glycolytic process.Results:HCT8/T cells demonstrated significant resistance to PTX,up-regulating the expression levels of ABCB1 mRNA,P-gp,LC3-I,and LC3-II protein,and increasing intracellular reactive oxygen species(ROS)content.PMFs mainly contain two active ingredients,nobiletin,and tangeretin,which were able to reverse drug resistance in HCT8/T cells in a concentration-dependent manner.PMFs exhibited high tolerance in the HCT8/T nude mouse model while increasing the sensitivity of PTX-resistant cells and suppressing tumor growth significantly.PMFs combined with PTX reduced extracellular acidification rate(ECAR)and oxygen consumption rate(OCR)in HCT8/T cells.Additionally,PMFs reduced intracellular ROS content,down-regulated the expression levels of autophagy-related proteins LC3-I,LC3-II,Beclin1,and ATG7,and significantly reduced the number of autophagosomes in HCT8/T cells.Conclusions:The present study demonstrated that PMFs could potentially reverse PTX resistance in colon cancer by regulating the aerobic glycolysis-ROS-autophagy signaling axis,which indicated that PMFs would be potential potentiators for future chemotherapeutic agents in colon cancer.
基金Supported by the Fund of Science and Technology on Vacuum Technology and Physics Laboratory of Lanzhou Institute of Physics under Grant No YSC0715the National Natural Science Foundation of China under Grant No 62601210the Civil Aerospace Technology Research Project under Grant No D010509
文摘The effects of three different typical resistivity models（Spitzer, Z＆L and M＆G） on the performance of pulsed inductive acceleration plasma are studied. Numerical results show that their influences decrease with the increase of the plasma temperature. The significant discriminations among them appear at the plasma temperature lower than 2.5 eV, and the maximum gap of the pulsed inductive plasma accelerated efficiency is approximately 2.5%.Moreover, the pulsed inductive plasma accelerated efficiency is absolutely related to the dynamic impedance parameters, such as voltage, inductance, capacitance and flow rate. However, the distribution of the efficiency as a function of plasma temperature with three resistivity models has nothing to do with the dynamic impedance parameter.
基金supported by the Ph.D.Research Startup Funding of Eastern Liaoning University(Grant no.2019BS009).
文摘The woven glass fiber reinforced composites(GFRP)subjected to high-speed impact is investigated to identify the hygrothermal aging effect on the impact resistance.Both the hygrothermal aged and unaged glass/epoxy laminates are subjected to different impact velocities,which is confirmed as a sensitive factor for the failure modes and mechanisms.The results show the hygrothermal aging effect decreases the ballistic limit by 14.9%,but the influence on ballistic performance is limited within the impact velocity closed to the ballistic limit.The failure modes and energy dissipation mechanisms are confirmed to be slightly influenced by the hygrothermal aging effect.The hygrothermal aging effect induced localization of structural deformation and degradation of mechanical properties are the main reasons for the composite undergoing the same failure modes at smaller impact velocities.Based on the energy absorption mechanisms,analytical expressions predict the ballistic limit and energy absorption to reasonable accuracy,the underestimated total energy absorption results in a relatively poor agreement between the measured and predicted energy absorption efficiency.
