The current–phase relations of a ring-trapped Bose–Einstein condensate interrupted by a rotating rectangular barrier are extensively investigated with an analytical solution. A current–phase diagram, single and mul...The current–phase relations of a ring-trapped Bose–Einstein condensate interrupted by a rotating rectangular barrier are extensively investigated with an analytical solution. A current–phase diagram, single and multi-valued relation, is presented with a rescaled barrier height and width. Our results show that the finite size makes the current–phase relation deviate a little bit from the cosine form for the soliton solution in the limit of a vanishing barrier, and the periodic boundary condition selects only the plane wave solution in the case of high barrier. The reason for multi-valued current–phase relation is given by investigating the behavior of soliton solution.展开更多
Low-density short-duration pulsed current-assisted aging treatment was applied to the Ti-6Al-4V-0.5Mo-0.5Zr alloy subjected to different solution treatments.The results show that numerous α_(p) phases redissolve into...Low-density short-duration pulsed current-assisted aging treatment was applied to the Ti-6Al-4V-0.5Mo-0.5Zr alloy subjected to different solution treatments.The results show that numerous α_(p) phases redissolve into the new β phase during the pulsed current-assisted aging process,and then the newly formed β phase is mainly transformed into the β_(t) phase,with occasional transition to new α_(p) phase,leading to a remarkable grain refinement,especially for the lamellarαs phases.In comparison to conventional aging treatment,the pulsed current-assisted aging approach achieves a significant enhancement in strength without degrading ductility,yielding an excellent mechanical property combination:a yield strength of 932 MPa,a tensile strength of 1042 MPa,and an elongation of 12.2%.It is primarily ascribed to the increased fraction of β_(t) phases,the obvious grain refinement effect,and the slip block effect induced by the multiple-variantαs colonies distributed within β_(t) phases.展开更多
This article investigates the robust current tracking control problem of three-phase grid-connected inverters with LCL filter under external disturbance by a dynamic state feedback control method.First,this paper cons...This article investigates the robust current tracking control problem of three-phase grid-connected inverters with LCL filter under external disturbance by a dynamic state feedback control method.First,this paper constructs an internal model to learn the information of the states and input of the grid-connected inverter under steady state.Second,by utilizing the internal model principle,the paper turns the tracking control problem into the robust stabilization control problem based on some appropriate coordinate transformations.Then,The paper designs a dynamics state feedback control law to deal with this robust stabilization problem,and thus the solution of the robust current tracking control problem of three-phase grid-connected inverters can be obtained.This control method can ensure the asymptotic stability of the closedloop system.Finally,the paper illustrates the effectiveness of the proposed control approach through several groups of simulations,and compares it with the feedforward control method to verify the robustness of the proposed control method to uncertain parameters.展开更多
[Background]High harmonic cavities are widely used in electron storage rings to lengthen thebunch,lower the bunch peak current,thereby reducing the IBS effect,enhancing the Touschek lifetime,as well asproviding Landau...[Background]High harmonic cavities are widely used in electron storage rings to lengthen thebunch,lower the bunch peak current,thereby reducing the IBS effect,enhancing the Touschek lifetime,as well asproviding Landau damping,which is particularly important for storage rings operating with ultra-low emittance or atlow beam energy.[Purpose]To further increase the bunch length without additional hardware costs,the phasemodulation in a dual-RF system is considered.[Methods]In this paper,turn-by-turn simulations incorporating randomsynchrotron radiation excitation are conducted,and a brief analysis is presented to explain the bunch lengtheningmechanism.[Results]Simulation results reveal that the peak current can be further reduced,thereby mitigating IBSeffects and enhancing the Touschek lifetime.Although the energy spread increases,which tends to reduce thebrightness of higher-harmonic radiation from the undulator,the brightness of the fundamental harmonic can,in fact,beimproved.展开更多
In-situ tensile tests were conducted on a chemically corroded third-generation single-crystal superalloy DD9 at 980 and 1100℃.The phase transformation in the surface areas during the tensile process was analyzed usin...In-situ tensile tests were conducted on a chemically corroded third-generation single-crystal superalloy DD9 at 980 and 1100℃.The phase transformation in the surface areas during the tensile process was analyzed using field emission scanning electron microscope,energy dispersive X-ray spectroscope,electron probe X-ray microanalysis,and transmission electron microscope.The phase transformation mechanism on the surface and the influence mechanism were studied through observation and dynamic calculation.During tensile tests at elevated temperatures,chemical corrosion promotes the precipitation of topologically close-packed(tcp)μphase andσphase on the alloy surface.Both the precipitation amount and size of these two phases on the surface at 1100℃are greater than those at 980℃.The precipitation of tcp phase on the alloy surface results in the formation of an influence layer on the surface area,and the distribution characteristics of alloying elements are significantly different from those of the substrate.The depth of the influence layer at 1100℃is greater than that at 980℃.The precipitation of tcp phase prompts the phase transition fromγphase toγ′phase around the tcp phase.展开更多
To address the challenge of balancing thermal management and thermal runaway mitigation,it is crucial to explore effective methods for enhancing the safety of lithium-ion battery systems.Herein,an innovative hydrated ...To address the challenge of balancing thermal management and thermal runaway mitigation,it is crucial to explore effective methods for enhancing the safety of lithium-ion battery systems.Herein,an innovative hydrated salt composite phase change material(HSCPCM)with dual phase transition temperature zones has been proposed.This HSCPCM,denoted as SDMA10,combines hydrophilic modified expanded graphite,an acrylic emulsion coating,and eutectic hydrated salts to achieve leakage prevention,enhanced thermal stability,cycling stability,and superior phase change behavior.Battery modules incorporating SDMA10 demonstrate significant thermal control capabilities.Specifically,the cylindrical battery modules with SDMA10 can maintain maximum operating temperatures below 55°C at 4 C discharge rate,while prismatic battery modules can keep maximum operating temperatures below 65°C at 2 C discharge rate.In extreme battery overheating conditions simulated using heating plates,SDMA10 effectively suppresses thermal propagation.Even when the central heating plate reaches 300°C,the maximum temperature at the module edge heating plates remains below 85°C.Further,compared to organic composite phase change materials(CPCMs),the battery module with SDMA10 can further reduce the peak thermal runaway temperature by 93°C and delay the thermal runaway trigger time by 689 s,thereby significantly decreasing heat diffusion.Therefore,the designed HSCPCM integrates excellent latent heat storage and thermochemical storage capabilities,providing high thermal energy storage density within the thermal management and thermal runaway threshold temperature range.This research will offer a promising pathway for improving the thermal safety performance of battery packs in electric vehicles and other energy storage systems.展开更多
In this paper,we present a broadband,high-extinction-ratio,nonvolatile 2×2 Mach-Zehnder interfer⁃ometer(MZI)optical switch based on the phase change material Sb_(2)Se_(3).The insertion loss(IL)is 0.84 dB and the ...In this paper,we present a broadband,high-extinction-ratio,nonvolatile 2×2 Mach-Zehnder interfer⁃ometer(MZI)optical switch based on the phase change material Sb_(2)Se_(3).The insertion loss(IL)is 0.84 dB and the extinction ratio(ER)reaches 28.8 dB at the wavelength of 1550 nm.The 3 dB bandwidth is greater than 150 nm.Within the 3 dB bandwidth,the ER is greater than 20.3 dB and 16.3 dB at bar and cross states,respectively.The power consumption for crystallization and amorphization of Sb_(2)Se_(3) is 105.86 nJ and 49 nJ,respectively.The switch holds significant promise for optical interconnects and optical computing applications.展开更多
A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5w...A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.展开更多
As electronic technology continues to evolve towards miniaturization and integration,the demand for micro-refrigeration technology in microelectronic systems is increasing.Ferroelectric(FE)refrigeration technology bas...As electronic technology continues to evolve towards miniaturization and integration,the demand for micro-refrigeration technology in microelectronic systems is increasing.Ferroelectric(FE)refrigeration technology based on the electrocaloric effect(ECE)has emerged as a highly promising candidate in this field,due to its advantages of high energy efficiency,simple structure,easy miniaturization,low cost,and environmental friendliness.The EC performance of FE materials essentially depends on the phase transition features under the coupled electric and thermal fields,making the E–T phase diagram a core tool for decoding the underlying mechanism of ECE.This paper reviews the development of EC materials,focusing on the comprehensive study of E–T phase diagrams.By correlating the microscopic phase structure of FE materials with the macroscopic physical properties,it clarifies the manipulation mechanism for enhanced ECE performance,providing theoretical support for the targeted design of high-performance EC materials.In the future,the introduction of data-driven methods is expected to enable the high-throughput construction of FE phase diagrams,thereby accelerating the optimization of high-performance EC materials and promoting the practical application of FE refrigeration technology.展开更多
Laser wakefield accelerators(LWFAs)offer acceleration gradients up to 1000 times higher than those of conventional radio-frequency accelerators,offering a pathway to significantly more compact and cost-effective accel...Laser wakefield accelerators(LWFAs)offer acceleration gradients up to 1000 times higher than those of conventional radio-frequency accelerators,offering a pathway to significantly more compact and cost-effective accelerator systems.This breakthrough opens up new possibilities for laboratory-scale light sources.All-optical inverse Compton scattering(AOCS)sources driven by LWFAs produce high-brightness,quasimonochromatic X rays with micrometer-scale source sizes,delivering the spatial coherence and resolution required for X-ray phase-contrast imaging(XPCI).These features position AOCS X-ray sources as promising tools for applications in biology,medicine,physics,and materials science.However,previous AOCS-based imaging studies have primarily focused on X-ray absorption imaging.In this work,we report successful experimental demonstrations of edge-enhanced in-line XPCI using energy-tunable,quasi-monochromatic AOCS X rays.With a spatial resolution of~20μm,our results clearly show the potential of high-resolution,AOCS-based XPCI applications.展开更多
In the context of the global energy low-carbon transition,phase change energy storage technology becomes a key technology to solve the problem of intermittent renewable energy.Oriented phase change composites(OCPCMs)r...In the context of the global energy low-carbon transition,phase change energy storage technology becomes a key technology to solve the problem of intermittent renewable energy.Oriented phase change composites(OCPCMs)receive widespread attention in practical energy storage applications due to their unique oriented thermally conductive structure,which achieves significant thermal conductivity enhancement in specific directions while retaining the high energy storage capacity of the phase change components.This review systematically summarizes the overall analysis of OCPCMs from synthesis and preparation to application scenarios in recent years.Herein,we introduce the analysis of the heat transfer mechanism of the materials and explore the advantages of the oriented structure in OCPCMs in the heat transfer behavior from a bionic perspective.We then focus on summarizing and generalizing the methods for preparing OCPCMs,giving suggestions for suitable methods according to different scenarios.Besides,we discuss the application of finite element simulation methods to the monitoring of the thermal management behavior of OCPCMs,and look into the potential future application areas of such materials.Finally,it is hoped that this review will provide guidance for the academic community in developing high-performance OCPCMs.展开更多
Energy density and safety are two crucial parameters when evaluating lithium-metal batteries(LMBs).Herein,we present an ultralight polymer-based current collector,incorporating flame-retardant materials,designed speci...Energy density and safety are two crucial parameters when evaluating lithium-metal batteries(LMBs).Herein,we present an ultralight polymer-based current collector,incorporating flame-retardant materials,designed specifically for thin lithium-metal anodes.Compared to the traditional copper current collector(8.96 mg cm^(-2),10μm thick),the polymer-based current collector(12μm thick)has a significantly lower areal density of 1.41 mg cm^(-2),i.e.,only one-sixth of the copper collector,thus enabling substantially higher energy densities.Accordingly,when employed in Li||NMC_(622)full-cells,the polymer-based current collector enables a specific energy of 449 Wh kg^(-1),representing a notable improvement of about14.5%compared to cells employing a classic copper current collector.The inclusion of Al(OH)_(3) as a flame retardant into the current collector suppresses flammability and,thereby,significantly improves the safety of the resulting LMBs.展开更多
With the advent of the big data era,modern statistics has enjoyed unprecedented development opportunities and also faced numerous new challenges.Traditional statistical computing methods are often limited by issues su...With the advent of the big data era,modern statistics has enjoyed unprecedented development opportunities and also faced numerous new challenges.Traditional statistical computing methods are often limited by issues such as computer memory capacity and distributed storage of data across different locations,and are unable to directly apply to large-scale data sets.Therefore,in the context of big data,designing efficient and theoretically guaranteed statistical learning and inference algorithms has become a key issue that the current field of statistics urgently needs to address.In this paper,the application status of statistical analysis methods in the big data environment was systematically reviewed,and its future development directions were analyzed to provide reference and support for the further development of theory and methods of the statistical analysis of big data.展开更多
The doped quantum spin liquid on the kagome lattice provides a fascinating platform to explore exotic quantum states,such as the reported holon Wigner crystal at low doping.By extending the doping range toδ=0.027–0....The doped quantum spin liquid on the kagome lattice provides a fascinating platform to explore exotic quantum states,such as the reported holon Wigner crystal at low doping.By extending the doping range toδ=0.027–0.36,we studied the kagome-lattice t-J model using state-of-the-art density matrix renormalization group calculations.On the L_(y)=3 cylinder(Ly is the number of unit cells along the circumferential direction),we established a quantum phase diagram with an increasing doping level.In addition to the charge density wave states at lower doping levels,we found an emergent Fermi-liquid-like phase by melting the holon Wigner crystal at δ≈0.15,which is characterized by the suppression of charge density oscillation and power-law decay of various correlation functions.For a wider L_(y)=4 cylinder,the bond-dimension extrapolated correlation functions also support such a Fermi-liquid-like state,suggesting its stability with increasing system size.In a narrow doping range near δ=1/3 for the L_(y)=3 cylinder,we find a state with an exponential decay of the single-particle correlation,but the other correlation functions preserve the features in the Fermi-liquid-like phase,which may be a precursor of a superconducting state.Nevertheless,this peculiar state nearδ=1/3 disappears for the L_(y)=4 cylinder,implying a possible lattice-size dependence.Our results reveal quantum melting from a holon Wigner crystal to a Fermi-liquid-like state with increasing hole density and suggest a doping regime to explore superconductivity in future studies.展开更多
Optical phase-gradient metasurfaces have garnered significant attention for enabling flexible light manipulation,with applications across diverse domains.In this work,we will demonstrate that the metasurfaces with pha...Optical phase-gradient metasurfaces have garnered significant attention for enabling flexible light manipulation,with applications across diverse domains.In this work,we will demonstrate that the metasurfaces with phase gradient modulation can be used to achieve illusion optics,featuring the advantages of simple geometric structure and feasible implementation compared with the well-known transformation optics method.The underlying mechanism is the anomalous diffraction law caused by the phase gradient,which provides a theoretical basis for freely manipulating the propagation path of light.By considering a specific example,we will demonstrate that the phase gradient can transform spatial coordinates in real space into illusion space,thereby converting a plane in real space into a curved surface structure in illusion space to achieve the illusion effect.This approach provides a viable alternative to transformation optics for designing illusion devices.展开更多
The direct reduction process can reduce carbon emissions by over 50%compared to traditional blast furnace ironmaking.Carbon deposition and carburization are critical for ensuring process stability and economic viabili...The direct reduction process can reduce carbon emissions by over 50%compared to traditional blast furnace ironmaking.Carbon deposition and carburization are critical for ensuring process stability and economic viability.Thermodynamic phase diagrams were developed to intuitively represent carbon deposition and carburization preferences in CH4-CO-H_(2) ternary atmospheres.High carbon potential and low oxygen potential significantly enhance carbon deposition and carburization.Increasing temperature from 500 to 1000℃ shifts the dominant reactions from CO-based to CH_(4)-based,increasing maximum carbon deposition from 0.55 to 0.80 mol and carburization from 0.25 to 0.80 mol per mole of reducing gas.Increasing pressure suppresses CH4-based reactions while promoting CO-based reactions,reducing maximum carbon deposition from 0.8 to~0.7 mol and increasing maximum carburization from 0.80 to 0.85 mol per mole of reducing gas.Equilibrium phase diagrams for various carbides were also developed,revealing preferences for Fe_(3)C_(2),Fe_(7)C_(3),Fe_(5)C_(2),and Fe_(3)C as the Fe/C ratio increases.Higher temperatures and CH_(4) concentrations favor the formation of carbides with higher carbon content.Carburization preferences under typical Energiron ZR and Midrex atmospheres were highlighted,and the higher carbon content in direct reduction iron produced by the Energiron ZR process was thermodynamically confirmed.展开更多
The transient synchronization stability of grid-forming converters(GFMCs)is significantly challenged under grid voltage sags.Continuous efforts have been devoted to analyzing the GFMC transient stability,with limited ...The transient synchronization stability of grid-forming converters(GFMCs)is significantly challenged under grid voltage sags.Continuous efforts have been devoted to analyzing the GFMC transient stability,with limited attention paid to the impacts of control loop dynamics.However,the complex control dynamics,especially the interactions between the active/reactive power control loops and the current saturation process(CSP),are crucial for accurately describing the transient behavior and evaluating the stability.Thus,in this study,a new large-signal GFMC model is established,considering the reactive power control(RPC)with different kinds of controllers and the CSP simultaneously.It is revealed that GFMC does not switch to the current-limited mode immediately,and the dynamics of RPC further affect the transient behavior before the current limiting significantly.Hence,the complex control dynamics can alter the mode switching point of current saturation,thereby increasing the risk of loss of synchronization(LOS).Based on the above findings,comprehensive comparisons of typical RPC controllers are presented to facilitate practical engineering applications.A unified stability enhancement method is proposed for solving the problem of LOS.Finally,experiments validate the correctness of the analysis and the effectiveness of the proposed control strategy.展开更多
The segmented solar telescope described in this study employs a simultaneous dual-wavelength measurement technique to achieve co-phase alignment.To meet the measurement requirements of a 20μm range,5 nm root mean squ...The segmented solar telescope described in this study employs a simultaneous dual-wavelength measurement technique to achieve co-phase alignment.To meet the measurement requirements of a 20μm range,5 nm root mean square precision,and edge jump rates of<10^(−6),this study focused on calibrating the dual-wavelength measurement system for the segmented-mirror solar telescope.Analysis of the relative error in the measurement system revealed that assembly-induced errors such as defocus,translation,scaling,and rotation markedly degrade measurement accuracy.To address these issues,we propose a defocus error compensation algorithm,based on the light intensity distribution of the point spread function(PSF)and an affine transformation model,to calibrate spatial pose deviations across the two measurement channels.A dual-wavelength measurement system was implemented on a segmented-mirror experimental platform for calibration.Experimental results demonstrated that the mean relative error decreased from−0.6423 to−0.0345 nm after calibration,reflecting improved reliability and stability of the co-phase measurements.展开更多
Lithium metal batteries(LMBs)are promising candidates for next-generation high-energy-density storage devices.However,an unstable lithium metal anode poses significant issues that critically compromise battery safety ...Lithium metal batteries(LMBs)are promising candidates for next-generation high-energy-density storage devices.However,an unstable lithium metal anode poses significant issues that critically compromise battery safety and cycle life,including lithium dendrite formation,solid electrolyte interphase degradation,dead lithium accumulation,and substantial volume fluctuations during cycling.These problems can be addressed by regulating lithium deposition and suppressing side reactions through the modification of copper current collectors using three classes of materials:metal and metal oxide,carbon,and polymer materials.This review comprehensively examines recent advances in the application of these materials as current collector coatings.Particularly,their distinct roles in the lithium deposition process are analyzed to understand how they mitigate the issues associated with the lithium metal anode.Furthermore,their inherent limitations are considered to inform future research directions.While each class of materials offers specific advantages,multifunctionality is required to effectively regulate lithium deposition.In prospect,a novel composite copper current collector design that integrates the merits of the aforementioned advanced materials is proposed.The insights from this review provide valuable guidance for the rational design of modified copper current collectors,which would significantly improve the safety and cycle life of LMBs and advance their commercialization.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.11874247)the National Key Research and Development Program of China(Grant Nos.2017YFA0304500 and 2017YFA0304203)+1 种基金PCSIRT,China(Grant No.IRT-17R70)the Program of State Key Laboratory of Quantum Optics and Quantum Optics Devices,China(Grant No.KF201703)
文摘The current–phase relations of a ring-trapped Bose–Einstein condensate interrupted by a rotating rectangular barrier are extensively investigated with an analytical solution. A current–phase diagram, single and multi-valued relation, is presented with a rescaled barrier height and width. Our results show that the finite size makes the current–phase relation deviate a little bit from the cosine form for the soliton solution in the limit of a vanishing barrier, and the periodic boundary condition selects only the plane wave solution in the case of high barrier. The reason for multi-valued current–phase relation is given by investigating the behavior of soliton solution.
基金National Key Research and Development Program of China(2021YFB3700801)。
文摘Low-density short-duration pulsed current-assisted aging treatment was applied to the Ti-6Al-4V-0.5Mo-0.5Zr alloy subjected to different solution treatments.The results show that numerous α_(p) phases redissolve into the new β phase during the pulsed current-assisted aging process,and then the newly formed β phase is mainly transformed into the β_(t) phase,with occasional transition to new α_(p) phase,leading to a remarkable grain refinement,especially for the lamellarαs phases.In comparison to conventional aging treatment,the pulsed current-assisted aging approach achieves a significant enhancement in strength without degrading ductility,yielding an excellent mechanical property combination:a yield strength of 932 MPa,a tensile strength of 1042 MPa,and an elongation of 12.2%.It is primarily ascribed to the increased fraction of β_(t) phases,the obvious grain refinement effect,and the slip block effect induced by the multiple-variantαs colonies distributed within β_(t) phases.
基金Supported by the Fundamental Research Funds for the Central Universities(2024ZYGXZR047)the National Natural Science Foundation of China(62373156)the Guangdong Basic and Applied Basic Research Foundation(2024A1515011736)。
文摘This article investigates the robust current tracking control problem of three-phase grid-connected inverters with LCL filter under external disturbance by a dynamic state feedback control method.First,this paper constructs an internal model to learn the information of the states and input of the grid-connected inverter under steady state.Second,by utilizing the internal model principle,the paper turns the tracking control problem into the robust stabilization control problem based on some appropriate coordinate transformations.Then,The paper designs a dynamics state feedback control law to deal with this robust stabilization problem,and thus the solution of the robust current tracking control problem of three-phase grid-connected inverters can be obtained.This control method can ensure the asymptotic stability of the closedloop system.Finally,the paper illustrates the effectiveness of the proposed control approach through several groups of simulations,and compares it with the feedforward control method to verify the robustness of the proposed control method to uncertain parameters.
基金National Natural Science Foundation of China(12405168)The Fundamental Research Funds for the Central Universities,China(2024CDJXY004)。
文摘[Background]High harmonic cavities are widely used in electron storage rings to lengthen thebunch,lower the bunch peak current,thereby reducing the IBS effect,enhancing the Touschek lifetime,as well asproviding Landau damping,which is particularly important for storage rings operating with ultra-low emittance or atlow beam energy.[Purpose]To further increase the bunch length without additional hardware costs,the phasemodulation in a dual-RF system is considered.[Methods]In this paper,turn-by-turn simulations incorporating randomsynchrotron radiation excitation are conducted,and a brief analysis is presented to explain the bunch lengtheningmechanism.[Results]Simulation results reveal that the peak current can be further reduced,thereby mitigating IBSeffects and enhancing the Touschek lifetime.Although the energy spread increases,which tends to reduce thebrightness of higher-harmonic radiation from the undulator,the brightness of the fundamental harmonic can,in fact,beimproved.
文摘In-situ tensile tests were conducted on a chemically corroded third-generation single-crystal superalloy DD9 at 980 and 1100℃.The phase transformation in the surface areas during the tensile process was analyzed using field emission scanning electron microscope,energy dispersive X-ray spectroscope,electron probe X-ray microanalysis,and transmission electron microscope.The phase transformation mechanism on the surface and the influence mechanism were studied through observation and dynamic calculation.During tensile tests at elevated temperatures,chemical corrosion promotes the precipitation of topologically close-packed(tcp)μphase andσphase on the alloy surface.Both the precipitation amount and size of these two phases on the surface at 1100℃are greater than those at 980℃.The precipitation of tcp phase on the alloy surface results in the formation of an influence layer on the surface area,and the distribution characteristics of alloying elements are significantly different from those of the substrate.The depth of the influence layer at 1100℃is greater than that at 980℃.The precipitation of tcp phase prompts the phase transition fromγphase toγ′phase around the tcp phase.
基金financially supported by Natural Science Foundation of Guangdong province(2024A1515010228)CATARC Automotive Inspection Center Excellent Engineer Program(2023B0909050007).
文摘To address the challenge of balancing thermal management and thermal runaway mitigation,it is crucial to explore effective methods for enhancing the safety of lithium-ion battery systems.Herein,an innovative hydrated salt composite phase change material(HSCPCM)with dual phase transition temperature zones has been proposed.This HSCPCM,denoted as SDMA10,combines hydrophilic modified expanded graphite,an acrylic emulsion coating,and eutectic hydrated salts to achieve leakage prevention,enhanced thermal stability,cycling stability,and superior phase change behavior.Battery modules incorporating SDMA10 demonstrate significant thermal control capabilities.Specifically,the cylindrical battery modules with SDMA10 can maintain maximum operating temperatures below 55°C at 4 C discharge rate,while prismatic battery modules can keep maximum operating temperatures below 65°C at 2 C discharge rate.In extreme battery overheating conditions simulated using heating plates,SDMA10 effectively suppresses thermal propagation.Even when the central heating plate reaches 300°C,the maximum temperature at the module edge heating plates remains below 85°C.Further,compared to organic composite phase change materials(CPCMs),the battery module with SDMA10 can further reduce the peak thermal runaway temperature by 93°C and delay the thermal runaway trigger time by 689 s,thereby significantly decreasing heat diffusion.Therefore,the designed HSCPCM integrates excellent latent heat storage and thermochemical storage capabilities,providing high thermal energy storage density within the thermal management and thermal runaway threshold temperature range.This research will offer a promising pathway for improving the thermal safety performance of battery packs in electric vehicles and other energy storage systems.
基金Supported by the National Natural Science Foundation of China(62204250)Autonomous deployment project of State Key Laboratory of Materials for Integrated Circuits(SKLJC-Z2024-A05).
文摘In this paper,we present a broadband,high-extinction-ratio,nonvolatile 2×2 Mach-Zehnder interfer⁃ometer(MZI)optical switch based on the phase change material Sb_(2)Se_(3).The insertion loss(IL)is 0.84 dB and the extinction ratio(ER)reaches 28.8 dB at the wavelength of 1550 nm.The 3 dB bandwidth is greater than 150 nm.Within the 3 dB bandwidth,the ER is greater than 20.3 dB and 16.3 dB at bar and cross states,respectively.The power consumption for crystallization and amorphization of Sb_(2)Se_(3) is 105.86 nJ and 49 nJ,respectively.The switch holds significant promise for optical interconnects and optical computing applications.
基金Shaanxi Province Qin Chuangyuan“Scientist+Engineer”Team Construction Project(2022KXJ-071)2022 Qin Chuangyuan Achievement Transformation Incubation Capacity Improvement Project(2022JH-ZHFHTS-0012)+8 种基金Shaanxi Province Key Research and Development Plan-“Two Chains”Integration Key Project-Qin Chuangyuan General Window Industrial Cluster Project(2023QCY-LL-02)Xixian New Area Science and Technology Plan(2022-YXYJ-003,2022-XXCY-010)2024 Scientific Research Project of Shaanxi National Defense Industry Vocational and Technical College(Gfy24-07)Shaanxi Vocational and Technical Education Association 2024 Vocational Education Teaching Reform Research Topic(2024SZX354)National Natural Science Foundation of China(U24A20115)2024 Shaanxi Provincial Education Department Service Local Special Scientific Research Program Project-Industrialization Cultivation Project(24JC005,24JC063)Shaanxi Province“14th Five-Year Plan”Education Science Plan,2024 Project(SGH24Y3181)National Key Research and Development Program of China(2023YFB4606400)Longmen Laboratory Frontier Exploration Topics Project(LMQYTSKT003)。
文摘A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.U25A20232,52325208,52173217,52202128)the Interdisciplinary Research Project for Young Teachers of USTB(Grant No.FRF-IDRY24-002)。
文摘As electronic technology continues to evolve towards miniaturization and integration,the demand for micro-refrigeration technology in microelectronic systems is increasing.Ferroelectric(FE)refrigeration technology based on the electrocaloric effect(ECE)has emerged as a highly promising candidate in this field,due to its advantages of high energy efficiency,simple structure,easy miniaturization,low cost,and environmental friendliness.The EC performance of FE materials essentially depends on the phase transition features under the coupled electric and thermal fields,making the E–T phase diagram a core tool for decoding the underlying mechanism of ECE.This paper reviews the development of EC materials,focusing on the comprehensive study of E–T phase diagrams.By correlating the microscopic phase structure of FE materials with the macroscopic physical properties,it clarifies the manipulation mechanism for enhanced ECE performance,providing theoretical support for the targeted design of high-performance EC materials.In the future,the introduction of data-driven methods is expected to enable the high-throughput construction of FE phase diagrams,thereby accelerating the optimization of high-performance EC materials and promoting the practical application of FE refrigeration technology.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0530000)the Discipline Construction Foundation of“Double World-class Project”.
文摘Laser wakefield accelerators(LWFAs)offer acceleration gradients up to 1000 times higher than those of conventional radio-frequency accelerators,offering a pathway to significantly more compact and cost-effective accelerator systems.This breakthrough opens up new possibilities for laboratory-scale light sources.All-optical inverse Compton scattering(AOCS)sources driven by LWFAs produce high-brightness,quasimonochromatic X rays with micrometer-scale source sizes,delivering the spatial coherence and resolution required for X-ray phase-contrast imaging(XPCI).These features position AOCS X-ray sources as promising tools for applications in biology,medicine,physics,and materials science.However,previous AOCS-based imaging studies have primarily focused on X-ray absorption imaging.In this work,we report successful experimental demonstrations of edge-enhanced in-line XPCI using energy-tunable,quasi-monochromatic AOCS X rays.With a spatial resolution of~20μm,our results clearly show the potential of high-resolution,AOCS-based XPCI applications.
基金financially supported by the Fundamental Research Funds for the Central Universities(No.FRF-KST-25-001)the Beijing Natural Science Foundation(No.L253029)。
文摘In the context of the global energy low-carbon transition,phase change energy storage technology becomes a key technology to solve the problem of intermittent renewable energy.Oriented phase change composites(OCPCMs)receive widespread attention in practical energy storage applications due to their unique oriented thermally conductive structure,which achieves significant thermal conductivity enhancement in specific directions while retaining the high energy storage capacity of the phase change components.This review systematically summarizes the overall analysis of OCPCMs from synthesis and preparation to application scenarios in recent years.Herein,we introduce the analysis of the heat transfer mechanism of the materials and explore the advantages of the oriented structure in OCPCMs in the heat transfer behavior from a bionic perspective.We then focus on summarizing and generalizing the methods for preparing OCPCMs,giving suggestions for suitable methods according to different scenarios.Besides,we discuss the application of finite element simulation methods to the monitoring of the thermal management behavior of OCPCMs,and look into the potential future application areas of such materials.Finally,it is hoped that this review will provide guidance for the academic community in developing high-performance OCPCMs.
基金financial support from the Helmholtz Association and the German Federal Ministry of Education and Research(BMBF)within the ExcellBattUlm project(03XP0257D)the HighSafe-3 project(03XP0568A)。
文摘Energy density and safety are two crucial parameters when evaluating lithium-metal batteries(LMBs).Herein,we present an ultralight polymer-based current collector,incorporating flame-retardant materials,designed specifically for thin lithium-metal anodes.Compared to the traditional copper current collector(8.96 mg cm^(-2),10μm thick),the polymer-based current collector(12μm thick)has a significantly lower areal density of 1.41 mg cm^(-2),i.e.,only one-sixth of the copper collector,thus enabling substantially higher energy densities.Accordingly,when employed in Li||NMC_(622)full-cells,the polymer-based current collector enables a specific energy of 449 Wh kg^(-1),representing a notable improvement of about14.5%compared to cells employing a classic copper current collector.The inclusion of Al(OH)_(3) as a flame retardant into the current collector suppresses flammability and,thereby,significantly improves the safety of the resulting LMBs.
文摘With the advent of the big data era,modern statistics has enjoyed unprecedented development opportunities and also faced numerous new challenges.Traditional statistical computing methods are often limited by issues such as computer memory capacity and distributed storage of data across different locations,and are unable to directly apply to large-scale data sets.Therefore,in the context of big data,designing efficient and theoretically guaranteed statistical learning and inference algorithms has become a key issue that the current field of statistics urgently needs to address.In this paper,the application status of statistical analysis methods in the big data environment was systematically reviewed,and its future development directions were analyzed to provide reference and support for the further development of theory and methods of the statistical analysis of big data.
基金supported by the National Natural Science Foundation of China (Grant Nos.12274014 and 12534009)the Guangdong Provincial Quantum Science Strategic Initiative (Grant No.GDZX2501006)+4 种基金the Special Project in Key Areas for Universities in Guangdong Province (Grant No.2023ZDZX3054)the Dongguan Key Laboratory of Artificial Intelligence Design for Advanced Materialssupported by the U.S.Department of Energy,Office of Basic Energy Sciences (Grant No.DE-FG02-06ER46305) for DMRG studies on unconventional superconductivitysupported by the SongShan Lake HPC Center (SSL-HPC) at Great Bay University (X.Y.J.and S.S.G.)supported in part by the US National Science Foundation (Grant No.DMR-2406524) (D.N.S.)。
文摘The doped quantum spin liquid on the kagome lattice provides a fascinating platform to explore exotic quantum states,such as the reported holon Wigner crystal at low doping.By extending the doping range toδ=0.027–0.36,we studied the kagome-lattice t-J model using state-of-the-art density matrix renormalization group calculations.On the L_(y)=3 cylinder(Ly is the number of unit cells along the circumferential direction),we established a quantum phase diagram with an increasing doping level.In addition to the charge density wave states at lower doping levels,we found an emergent Fermi-liquid-like phase by melting the holon Wigner crystal at δ≈0.15,which is characterized by the suppression of charge density oscillation and power-law decay of various correlation functions.For a wider L_(y)=4 cylinder,the bond-dimension extrapolated correlation functions also support such a Fermi-liquid-like state,suggesting its stability with increasing system size.In a narrow doping range near δ=1/3 for the L_(y)=3 cylinder,we find a state with an exponential decay of the single-particle correlation,but the other correlation functions preserve the features in the Fermi-liquid-like phase,which may be a precursor of a superconducting state.Nevertheless,this peculiar state nearδ=1/3 disappears for the L_(y)=4 cylinder,implying a possible lattice-size dependence.Our results reveal quantum melting from a holon Wigner crystal to a Fermi-liquid-like state with increasing hole density and suggest a doping regime to explore superconductivity in future studies.
基金supported by the National Natural Science Foundation of China (Grant Nos.12274313 and 62375234)the Gusu Leading Talent Plan for Scientific and Technological Innovation and Entrepreneurship (Grant No.ZXL2024400)。
文摘Optical phase-gradient metasurfaces have garnered significant attention for enabling flexible light manipulation,with applications across diverse domains.In this work,we will demonstrate that the metasurfaces with phase gradient modulation can be used to achieve illusion optics,featuring the advantages of simple geometric structure and feasible implementation compared with the well-known transformation optics method.The underlying mechanism is the anomalous diffraction law caused by the phase gradient,which provides a theoretical basis for freely manipulating the propagation path of light.By considering a specific example,we will demonstrate that the phase gradient can transform spatial coordinates in real space into illusion space,thereby converting a plane in real space into a curved surface structure in illusion space to achieve the illusion effect.This approach provides a viable alternative to transformation optics for designing illusion devices.
基金the financial support from the National Key R&D Program of China(No.2024YFC2910800)National Natural Science Foundation of China(52404336)+6 种基金China Postdoctoral Science Foundation(2024M750176)Postdoctoral Fellowship Program of CPSF(GZC20240109)the Young Elite Scientist Sponsorship Program by CAST(YESS20210090)Beijing Natural Science Foundation(J210017)the Project of SKLAM(No.KF24-14)China Baowu Low Carbon Metallurgical Technology Innovation Fund under Grant No.20210901Anhui Major Industrial Innovation Program under Contract No.AHZDCYCX-LSDT2023-01.
文摘The direct reduction process can reduce carbon emissions by over 50%compared to traditional blast furnace ironmaking.Carbon deposition and carburization are critical for ensuring process stability and economic viability.Thermodynamic phase diagrams were developed to intuitively represent carbon deposition and carburization preferences in CH4-CO-H_(2) ternary atmospheres.High carbon potential and low oxygen potential significantly enhance carbon deposition and carburization.Increasing temperature from 500 to 1000℃ shifts the dominant reactions from CO-based to CH_(4)-based,increasing maximum carbon deposition from 0.55 to 0.80 mol and carburization from 0.25 to 0.80 mol per mole of reducing gas.Increasing pressure suppresses CH4-based reactions while promoting CO-based reactions,reducing maximum carbon deposition from 0.8 to~0.7 mol and increasing maximum carburization from 0.80 to 0.85 mol per mole of reducing gas.Equilibrium phase diagrams for various carbides were also developed,revealing preferences for Fe_(3)C_(2),Fe_(7)C_(3),Fe_(5)C_(2),and Fe_(3)C as the Fe/C ratio increases.Higher temperatures and CH_(4) concentrations favor the formation of carbides with higher carbon content.Carburization preferences under typical Energiron ZR and Midrex atmospheres were highlighted,and the higher carbon content in direct reduction iron produced by the Energiron ZR process was thermodynamically confirmed.
基金supported by the National Natural Science Foundation of China under Grant 52277184 and Grant 52277183.
文摘The transient synchronization stability of grid-forming converters(GFMCs)is significantly challenged under grid voltage sags.Continuous efforts have been devoted to analyzing the GFMC transient stability,with limited attention paid to the impacts of control loop dynamics.However,the complex control dynamics,especially the interactions between the active/reactive power control loops and the current saturation process(CSP),are crucial for accurately describing the transient behavior and evaluating the stability.Thus,in this study,a new large-signal GFMC model is established,considering the reactive power control(RPC)with different kinds of controllers and the CSP simultaneously.It is revealed that GFMC does not switch to the current-limited mode immediately,and the dynamics of RPC further affect the transient behavior before the current limiting significantly.Hence,the complex control dynamics can alter the mode switching point of current saturation,thereby increasing the risk of loss of synchronization(LOS).Based on the above findings,comprehensive comparisons of typical RPC controllers are presented to facilitate practical engineering applications.A unified stability enhancement method is proposed for solving the problem of LOS.Finally,experiments validate the correctness of the analysis and the effectiveness of the proposed control strategy.
基金supported by the Yunnan Revitalization Talent Support Program(202305AS350029 and 202305AT350005)Yunnan Revitalization Talent Support Program-Science&Technology Champion Project(202105AB160001)+1 种基金Yunnan Key Laboratory of Solar Physics and Space Science(202205AG070009)Yunnan Provincial Science and Technology Department(202401AU070062).
文摘The segmented solar telescope described in this study employs a simultaneous dual-wavelength measurement technique to achieve co-phase alignment.To meet the measurement requirements of a 20μm range,5 nm root mean square precision,and edge jump rates of<10^(−6),this study focused on calibrating the dual-wavelength measurement system for the segmented-mirror solar telescope.Analysis of the relative error in the measurement system revealed that assembly-induced errors such as defocus,translation,scaling,and rotation markedly degrade measurement accuracy.To address these issues,we propose a defocus error compensation algorithm,based on the light intensity distribution of the point spread function(PSF)and an affine transformation model,to calibrate spatial pose deviations across the two measurement channels.A dual-wavelength measurement system was implemented on a segmented-mirror experimental platform for calibration.Experimental results demonstrated that the mean relative error decreased from−0.6423 to−0.0345 nm after calibration,reflecting improved reliability and stability of the co-phase measurements.
基金supported by the National Natural Science Foundation of China(grant numbers 52071225,22179143,and 22002176)the European Union’s Horizon Europe research and innovation program Electron Beam Emergent Additive Manufacturing(EBEAM)(grant number 101087143)+2 种基金a Norway Grant through the National Science Centre(project number 2019/34/H/ST8/00547)the National Key R&D Program of China(grant number 2021YFB3800300)the Jiangsu Funding Program for Excellent Postdoctoral Talent。
文摘Lithium metal batteries(LMBs)are promising candidates for next-generation high-energy-density storage devices.However,an unstable lithium metal anode poses significant issues that critically compromise battery safety and cycle life,including lithium dendrite formation,solid electrolyte interphase degradation,dead lithium accumulation,and substantial volume fluctuations during cycling.These problems can be addressed by regulating lithium deposition and suppressing side reactions through the modification of copper current collectors using three classes of materials:metal and metal oxide,carbon,and polymer materials.This review comprehensively examines recent advances in the application of these materials as current collector coatings.Particularly,their distinct roles in the lithium deposition process are analyzed to understand how they mitigate the issues associated with the lithium metal anode.Furthermore,their inherent limitations are considered to inform future research directions.While each class of materials offers specific advantages,multifunctionality is required to effectively regulate lithium deposition.In prospect,a novel composite copper current collector design that integrates the merits of the aforementioned advanced materials is proposed.The insights from this review provide valuable guidance for the rational design of modified copper current collectors,which would significantly improve the safety and cycle life of LMBs and advance their commercialization.
