A design of 13 Gbit/s vertical cavity surface emitting laser （VCSEL） driver using 0.18 μm complementary metal oxide semiconductor （CMOS） technology is presented in this paper. The core unit of the driver consists...A design of 13 Gbit/s vertical cavity surface emitting laser （VCSEL） driver using 0.18 μm complementary metal oxide semiconductor （CMOS） technology is presented in this paper. The core unit of the driver consists of pre-amplify stage and output stage circuit. Techniques of three stages differential amplifier with low impedance load and active feedback are employed in pre-amplify stage, and technique of C3A is adopted in output stage to acquire low power consumption and high speed. The experimental results show that the circuit can work at the data rate of 10 Gbit/s and maximum of 13.2 Gbit/s. The output modulation current is up to 12.5 mA and the power dissipation is only 68 mW with a 1.8 V power supply.展开更多
Abstract---The stability of the drive current is very important for a laser driver, while it is difficult to maintain the current stable at a high value for the laser driver. On the other hand, the range of the drive ...Abstract---The stability of the drive current is very important for a laser driver, while it is difficult to maintain the current stable at a high value for the laser driver. On the other hand, the range of the drive current is expected to be as wide as possible to be applied to different kinds of lasers. In this paper, a high current laser driver for the superluminescent light emitting diode （SLED） is presented, which is used in the optic fiber gyro embedded by a 0.35 μm bipolar complementary metal-oxide-semiconductor transistor （BiCMOS） process. The laser driver provides automatic power control and certain value of current determined by the external resister. The system is based on the optic-electric feedback theory and uses the closed-loop control technique to maintain the drive current stable. The system is capable of producing stable current ranges from 4 mA to 200 mA when the value of external resister changes.展开更多
A high power buck-boost switch-mode LED driver delivering a constant 350 mA with a power efficient current sensing scheme is presented in this paper. The LED current is extracted by differentiating the output capacito...A high power buck-boost switch-mode LED driver delivering a constant 350 mA with a power efficient current sensing scheme is presented in this paper. The LED current is extracted by differentiating the output capacitor voltage and maintained by a feedback. The circuit has been fabricated in a standard 0.35 μm AMS CMOS process. Measurement results demonstrated a power-conversion efficiency over 90% with a line regulation of 8%/V for input voltage of 3.3 V and current output between 200 mA and 350 mA.展开更多
This paper presents the design and testing of a 15 Gbps non-return-to-zero(NRZ),30 Gbps 4-level pulse amplitude modulation(PAM4)configurable laser diode driver(LDD)implemented in 0.15-μm GaAs E-mode pHEMT technology....This paper presents the design and testing of a 15 Gbps non-return-to-zero(NRZ),30 Gbps 4-level pulse amplitude modulation(PAM4)configurable laser diode driver(LDD)implemented in 0.15-μm GaAs E-mode pHEMT technology.The driver bandwidth is enhanced by utilizing cross-coupled neutralization capacitors across the output stage.The output transmission-line back-termination,which absorbs signal reflections from the imperfectly matched load,is performed passively with on-chip 50-Ωresistors.The proposed 30 Gbps PAM4 LDD is implemented by combining two 15 Gbps-NRZ LDDs,as the high and low amplification paths,to generate PAM4 output current signal with levels of 0,40,80,and 120 mA when driving 25-Ωlasers.The high and low amplification paths can be used separately or simultaneously as a 15 Gbps-NRZ LDD.The measurement results show clear output eye diagrams at speeds of up to 15 and 30 Gbps for the NRZ and PAM4 drivers,respectively.At a maximum output current of 120 mA,the driver consumes 1.228 W from a single supply voltage of-5.2 V.The proposed driver shows a high current driving capability with a better output power to power dissipation ratio,which makes it suitable for driving high current distributed feedback(DFB)lasers.The chip occupies a total area of 0.7×1.3 mm^(2).展开更多
基金supported by the Hi-Tech Research and Development Program of China(2011AA010301)the National Natural Science Foundation of China(60976029)
文摘A design of 13 Gbit/s vertical cavity surface emitting laser （VCSEL） driver using 0.18 μm complementary metal oxide semiconductor （CMOS） technology is presented in this paper. The core unit of the driver consists of pre-amplify stage and output stage circuit. Techniques of three stages differential amplifier with low impedance load and active feedback are employed in pre-amplify stage, and technique of C3A is adopted in output stage to acquire low power consumption and high speed. The experimental results show that the circuit can work at the data rate of 10 Gbit/s and maximum of 13.2 Gbit/s. The output modulation current is up to 12.5 mA and the power dissipation is only 68 mW with a 1.8 V power supply.
文摘Abstract---The stability of the drive current is very important for a laser driver, while it is difficult to maintain the current stable at a high value for the laser driver. On the other hand, the range of the drive current is expected to be as wide as possible to be applied to different kinds of lasers. In this paper, a high current laser driver for the superluminescent light emitting diode （SLED） is presented, which is used in the optic fiber gyro embedded by a 0.35 μm bipolar complementary metal-oxide-semiconductor transistor （BiCMOS） process. The laser driver provides automatic power control and certain value of current determined by the external resister. The system is based on the optic-electric feedback theory and uses the closed-loop control technique to maintain the drive current stable. The system is capable of producing stable current ranges from 4 mA to 200 mA when the value of external resister changes.
文摘A high power buck-boost switch-mode LED driver delivering a constant 350 mA with a power efficient current sensing scheme is presented in this paper. The LED current is extracted by differentiating the output capacitor voltage and maintained by a feedback. The circuit has been fabricated in a standard 0.35 μm AMS CMOS process. Measurement results demonstrated a power-conversion efficiency over 90% with a line regulation of 8%/V for input voltage of 3.3 V and current output between 200 mA and 350 mA.
文摘This paper presents the design and testing of a 15 Gbps non-return-to-zero(NRZ),30 Gbps 4-level pulse amplitude modulation(PAM4)configurable laser diode driver(LDD)implemented in 0.15-μm GaAs E-mode pHEMT technology.The driver bandwidth is enhanced by utilizing cross-coupled neutralization capacitors across the output stage.The output transmission-line back-termination,which absorbs signal reflections from the imperfectly matched load,is performed passively with on-chip 50-Ωresistors.The proposed 30 Gbps PAM4 LDD is implemented by combining two 15 Gbps-NRZ LDDs,as the high and low amplification paths,to generate PAM4 output current signal with levels of 0,40,80,and 120 mA when driving 25-Ωlasers.The high and low amplification paths can be used separately or simultaneously as a 15 Gbps-NRZ LDD.The measurement results show clear output eye diagrams at speeds of up to 15 and 30 Gbps for the NRZ and PAM4 drivers,respectively.At a maximum output current of 120 mA,the driver consumes 1.228 W from a single supply voltage of-5.2 V.The proposed driver shows a high current driving capability with a better output power to power dissipation ratio,which makes it suitable for driving high current distributed feedback(DFB)lasers.The chip occupies a total area of 0.7×1.3 mm^(2).
