SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminu...SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminum foams was investigated.The macro/micro-features of the aluminum foams were characterized and analyzed.Results demonstrate that an appropriate increase in SiC content and the uniform distribution of SiC can improve the foaming stability,optimize the cell diameter and cell wall thickness,ameliorate the cell distribution,and enhance the hardness and compressive strength of the aluminum foams.However,either insufficient or excessive SiC leads to uneven distribution of SiC particles,which is unfavorable to foaming stability and good cell structure formation.With 6wt%SiC,both the foaming stability and cell structure of the aluminum foam reach the optimal state,resulting in the highest compressive strength and optimal energy absorption capacity.展开更多
In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical m...In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical model,and its validity was verified using a simple impact test.A crushable discrete element method(DEM)framework is built based on the previously established theoretical model.The tensile strength,which considers the fractal theory,size effect,and Weibull variation,was assigned to each generated particle.The assigned strength is then used for crush detection by comparing it with its maximum tensile stress.Mass conservation is ensured by inserting a series of sub-particles whose total mass was equal to the quality loss.Based on the crushable DEM framework,a numerical simulation of the crushing behavior of a pebble bed with hollow cylindrical geometry under a uniaxial compression test was performed.The results of this investigation showed that the particle withstands the external load by contact and sliding at the beginning of the compression process,and the results confirmed that crushing can be considered an important method of resisting the increasing external load.A relatively regular particle arrangement aids in resisting the load and reduces the occurrence of particle crushing.However,a limit exists to the promotion of resistance.When the strain increases beyond this limit,the distribution of the crushing position tends to be isotropic over the entire pebble bed.The theoretical model and crushable DEM framework provide a new method for exploring the pebble bed in a fusion reactor,considering particle crushing.展开更多
Photoacoustic-computed tomography is a novel imaging technique that combines high absorption contrast and deep tissue penetration capability,enabling comprehensive three-dimensional imaging of biological targets.Howev...Photoacoustic-computed tomography is a novel imaging technique that combines high absorption contrast and deep tissue penetration capability,enabling comprehensive three-dimensional imaging of biological targets.However,the increasing demand for higher resolution and real-time imaging results in significant data volume,limiting data storage,transmission and processing efficiency of system.Therefore,there is an urgent need for an effective method to compress the raw data without compromising image quality.This paper presents a photoacoustic-computed tomography 3D data compression method and system based on Wavelet-Transformer.This method is based on the cooperative compression framework that integrates wavelet hard coding with deep learning-based soft decoding.It combines the multiscale analysis capability of wavelet transforms with the global feature modeling advantage of Transformers,achieving high-quality data compression and reconstruction.Experimental results using k-wave simulation suggest that the proposed compression system has advantages under extreme compression conditions,achieving a raw data compression ratio of up to 1:40.Furthermore,three-dimensional data compression experiment using in vivo mouse demonstrated that the maximum peak signal-to-noise ratio(PSNR)and structural similarity index(SSIM)values of reconstructed images reached 38.60 and 0.9583,effectively overcoming detail loss and artifacts introduced by raw data compression.All the results suggest that the proposed system can significantly reduce storage requirements and hardware cost,enhancing computational efficiency and image quality.These advantages support the development of photoacoustic-computed tomography toward higher efficiency,real-time performance and intelligent functionality.展开更多
Dear Editor,The letter proposes a tensor low-rank orthogonal compression(TLOC)model for a convolutional neural network(CNN),which facilitates its efficient and highly-accurate low-rank representation.Model compression...Dear Editor,The letter proposes a tensor low-rank orthogonal compression(TLOC)model for a convolutional neural network(CNN),which facilitates its efficient and highly-accurate low-rank representation.Model compression is crucial for deploying deep neural network(DNN)models on resource-constrained embedded devices.展开更多
To achieve the potential performance gain of massive multiple-input multiple-output(MIMO)systems,base stations(BS)require downlink channel state information(CSI)fed back by users to execute beamforming design,especial...To achieve the potential performance gain of massive multiple-input multiple-output(MIMO)systems,base stations(BS)require downlink channel state information(CSI)fed back by users to execute beamforming design,especially in the frequency division duplex(FDD)systems.However,due to the enormous number of antennas in massive MIMO systems,the feedback overhead of downlink CSI acquisition is extremely large.To address this issue,deep learning(DL)techniques have been introduced to de velop high-accuracy feedback strategies under limited backhaul constraints.In this paper,we provide an overview of DL-based CSI compression and feedback approaches in massive MIMO systems.Specifically,we introduce the conventional CSI compression and feedback schemes and the existing problems.Besides,we elaborate on various DL techniques employed in CSI compression from the perspective of network architecture and analyze the advantages of different techniques.We also enumerate the applications of DL-based methods for solving practical challenges in CSI compression and feedback.In addition,we brief the remaining issues in deep CSI compression and indicate potential directions in future wireless networks.展开更多
Rock brittleness is a critical property in geotechnical and energy engineering,as it directly influences the prediction of rock failure and stability assessment.Although numerous methods have been developed to evaluat...Rock brittleness is a critical property in geotechnical and energy engineering,as it directly influences the prediction of rock failure and stability assessment.Although numerous methods have been developed to evaluate brittleness,many fail to comprehensively account for the impacts of microstructural changes,mineralogical characteristics,and stress conditions on energy evolution during failure.This study proposes a novel approach for brittleness evaluation based on the energy evolution throughout the post-peak failure process,integrating two micromechanical mechanisms:crack propagation and frictional sliding.A new brittleness index is defined as the ratio of generated surface energy to released elastic energy,providing a unified framework for assessing both Class I and Class II mechanical behaviors.The brittleness of cyan,white,and gray sandstones was investigated under various confining pressures and moisture conditions using X-ray diffraction(XRD),scanning electron microscopy(SEM),and conventional triaxial compression(CTC)tests.The results demonstrate that brittleness decreases with increasing confining pressure,due to suppressed crack propagation,and increases under saturated conditions,as moisture enhances crack propagation.By establishing connections between mineral composition,microstructural features,and stress-induced responses,the proposed method overcame limitations of previous approaches and offered a more precise tool for evaluating rock brittleness under diverse environmental scenarios.展开更多
An in-depth understanding of the behaviours of solid propellants under low-velocity impact loads is crucial for enhancing their safety in applications such as aerospace propulsion.This study investigated the dynamic r...An in-depth understanding of the behaviours of solid propellants under low-velocity impact loads is crucial for enhancing their safety in applications such as aerospace propulsion.This study investigated the dynamic responses of single ammonium perchlorate(AP)/octogen(HMX)particles embedded in a hydroxyl-terminated polybutadiene(HTPB)binder under dynamic compression loading via real-time synchrotron-based X-ray phase contrast imaging and a modified split Hopkinson pressure bar(SHPB)system.The compression of the viscoelastic binder and subsequent dynamic fracturing of the AP/HMX particles were captured.During compression,transverse cracks developed within the AP particles,and their propagation led to particle fracturing,resulting in ductile fracturing.Unlike AP,HMX generated numerous short cracks within the internal and edge regions simultaneously,leading to fragmentation and brittle fracturing.Moreover,particle damage reduced the modulus of the sample,shifting its dynamic stress response from nonlinear elasticity to strain softening and further strain hardening as the binder exhibited plastic deformation.A compression simulation incorporating a real particle microscopic structure was established to study the mechanical response of the interface and particles.The simulation results agreed with the experimental observations.These results indicate that the shear stress at the HTPB-AP interface is greater than that at the HTPB-HMX interface,which is a factor influencing the differences in the mesoscale damage mechanisms of the particles.展开更多
Micropillar compression tests were used to investigate the influence of hydrogen on the deformation behavior and hydrogen embrittlement(HE)of nitrogen-alloyed austenitic stainless steel QN_(2)109.Results indicate that...Micropillar compression tests were used to investigate the influence of hydrogen on the deformation behavior and hydrogen embrittlement(HE)of nitrogen-alloyed austenitic stainless steel QN_(2)109.Results indicate that the hydrogen increases the dislocation density,reduces the yield stress,and accelerates the formation and intersection of slip bands,with hydrogen-induced cracks initiating at slip band intersections.X-ray diffraction confirms the absence of martensitic transformation,ruling out the role of martensitic transformation in HE.The micropillar compression technique is highly sensitive for characterizing hydrogen-material interactions,owing to the material’s low hydrogen diffusivity and the small size of its hydrogen-affected zone.These findings align with the hydrogen-enhanced localized plasticity mechanism.展开更多
The deformation and failure of coal walls in front of a working face cause significant difficulties during mining operations.This study reveals the nonuniform distribution of bearing pressure in front of coal walls ba...The deformation and failure of coal walls in front of a working face cause significant difficulties during mining operations.This study reveals the nonuniform distribution of bearing pressure in front of coal walls based on in situ monitoring data and numerical simulation.Therefore,an eccentric compression mechanical model was established to study the deformation and failure characteristics of a coal wall.The slenderness ratio of the compression bar is introduced to define coal walls.The results showed that instability failure occurs when λ>λ_(c) and material failure occurs when λ≤λ_(c).The instability failure-type coal wall spalling was related to the mining height,eccentricity of roof pressure,the horizontal force,and the reaction moment of the floor.The material failure-type coal wall spalling was related to the cohesion,the internal friction angle of the coal,the upper pressure,and the horizontal force of coal walls.Unstable and destructive coal wall peeling usually occurs at a height of 0.5–0.6 times the mining height,while material damage to coal wall peeling is determined to occur within the range of 0.4-0.6 times the mining depth.The findings contribute to the understanding of the deformation and failure of coal walls.展开更多
To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-r...To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-ray computed tomography were combined to obtain the strain distribution over the sample surface and internal fractures of the samples.The Gini and skewness(G-S)coefficients were used to quantify strain localization during tests,where the Gini coefficient reflects the degree of clustering of elements with high strain values,i.e.,strain localization/delocalization.The strain localization-induced asymmetry of data distribution is quantified by the skewness coefficient.A precursor to granite failure is defined by the rapid and simultaneous increase of the G-S coefficients,which are calculated from strain increment,giving an earlier warning of failure by about 8%peak stress than those from absolute strain values.Moreover,the process of damage accumulation due to stress-driven crack propagation in Beishan granite is different at various confining pressures as the stress exceeds the crack initiation stress.Concretely,strain localization is continuous until brittle failure at higher confining pressure,while both strain localization and delocalization occur at lower confining pressure.Despite the different stress conditions,a similar statistical characteristic of strain localization during the creep stage is observed.The Gini coefficient increases,and the skewness coefficient decreases slightly as the creep stress is below 95%peak stress.When the accelerated strain localization begins,the Gini and skewness coefficients increase rapidly and simultaneously.展开更多
In the field of rock engineering,the influence of water is a dynamic process that exhibits varying effects over time and across different locations.To further understand how water influences the mechanical properties ...In the field of rock engineering,the influence of water is a dynamic process that exhibits varying effects over time and across different locations.To further understand how water influences the mechanical properties and acoustic emission(AE)behavior of rocks,this study conducted uniaxial compression experiments on sandstones with varying degrees of wetting under both natural conditions and water-chemical environments.In addition,the study combined AE equipment with digital image correlation(DIC)to monitor the entire failure process.Using the sliding window algorithm,the variation in the variance of AE characteristic parameters during the process of sandstone loading to failure is analyzed from the perspective of critical slowing down.This analysis enables the effective identification of the early warning signal before failure.The experimental findings suggest that an increase in wetting height results in a gradual decrease in peak stress,accompanied by a concomitant increase in the percentage of shear cracks.The characteristic parameters,including energy,amplitude,and ringing count,all exhibit critical slowing phenomena.The waveform of AE characteristic parameters of the same sample is similar,and the mutation time of the precursor signal is roughly the same.All signals appear in the irreversible plastic deformation stage of microcrack initiation.The integration of critical slowing down theory and the b-value early warning method facilitates a more comprehensive evaluation of the stability of rock mass,thereby significantly enhancing the efficiency and safety of disaster prevention measures.展开更多
We present the first systematic experimental validation of return-current-driven cylindrical implosion scaling in micrometer-sized Cu and Al wires irradiated by J-class femtosecond laser pulses.Employing XFEL-based im...We present the first systematic experimental validation of return-current-driven cylindrical implosion scaling in micrometer-sized Cu and Al wires irradiated by J-class femtosecond laser pulses.Employing XFEL-based imaging with sub-micrometer spatial and femtosecond temporal resolution,supported by hydrodynamic and particle-in-cell simulations,we reveal how return current density depends precisely on wire diameter,material properties,and incident laser energy.We identify deviations from simple theoretical predictions due to geometrically influenced electron escape dynamics.These results refine and confirm the scaling laws essential for predictive modeling in high-energy-density physics and inertial fusion research.展开更多
Grain crushing plays an important role in one-dimensional (1D) compression and creep behaviors of granular materials under high stress. It is clear that the macro-properties of granular materials are closely related t...Grain crushing plays an important role in one-dimensional (1D) compression and creep behaviors of granular materials under high stress. It is clear that the macro-properties of granular materials are closely related to the micro-fracture properties of grains in 1D compression and creep tests. In this paper, a series of 1D compression and creep tests were performed on Ottawa sand to investigate the deformation and grain crushing properties of granular materials, and it shows that the void ratio is correlated to the grain crushing amount (the quantity of crushed grains) for granular materials subjected to grain crushing. The test results, combining with the existing test data related to grain crushing of granular materials, were used to verify the relation. Moreover, the implications of these relations on the yield of granular material, and the equivalent effect of stress and time in changing soil fabric are presented.展开更多
An experimental study is presented to measure the elastic,yielding,and crushing properties of individual particles under compression using substrates made of aluminum alloy,stainless steel,and sapphire.Carefully selec...An experimental study is presented to measure the elastic,yielding,and crushing properties of individual particles under compression using substrates made of aluminum alloy,stainless steel,and sapphire.Carefully selected,highly spherical individual Ottawa sand particles of 0.75e1.1 mm in nominal diameter were compressed between two smooth substrates,and the loadedeformation curves were analyzed by Hertz elastic contact theory to derive their reduced modulus and Young’s modulus as well as yielding and crushing strengths,which vary significantly with the type of substrate materials.Further analysis of the yielding and plastic deformation at the particle-substrate contact shows that the yield strength or hardness of the substrate materials dominates the local contact behavior and hence affects the measured apparent yielding and crushing strengths.The two softer substrates(aluminum alloy and stainless steel)actually lead to underestimated apparent shear yield strengths of quartz particles by 60.4%and 54.2%,respectively,which are actually the yielding of substrates,while the true particle yielding occurs in the sapphire-particle contact.Moreover,the two softer substrates cause much overestimated crushing strengths of the quartz particles by 50.4%and 36.4%,respectively.Selection of inappropriate substrate materials and inappropriate interpretation of the particle-substrate contact can lead to significant errors in the measured yielding and crushing strengths.It is recommended that single particle compression testing uses substrates with yield strength greater than that of the tested particles and result interpretation also considers the elastic and yielding behaviors of the substrates.展开更多
We investigated the effect of structural factor and amide grafted multi-walled carbon nanotubes（MWNTs-NH2） on crushing characteristics of filament wound CFRP tube under quasi-static compression conditon. It was foun...We investigated the effect of structural factor and amide grafted multi-walled carbon nanotubes（MWNTs-NH2） on crushing characteristics of filament wound CFRP tube under quasi-static compression conditon. It was found that CFRP tubes sequentially showed the brittle fracturing mode, the local buckling fracturing mode and transverse shearing fracturing mode with increasing winding angle, respectively, with the characterizations by mechanical testing, SEM and optical microscopy. Moreover, crack propagation initiated by pre-crack and subsequent failure in the tube were strongly dependent on pre-crack angle due to defl ection and penetration competition of crack evolution. The simulated compression failure behavior correlated well with the experimental results, revealing that the Chang-Chang failure criterion was effective in representing the quasistatic crushing characteristics of the tube. In addtion, the MWNTs-NH2 were sucessfully obtained by multistep functionization. The compressvie properties of the tubes were signifi cantly improved by the addition of the MWNTs-NH2 due to their uniform dispersion and high interfacial chemical reactivity, whereas the as-received MWNTs and other functionalized MWNTs were not as effective.展开更多
The high variability of shock in terrorist attacks poses a threat to people's lives and properties,necessitating the development of more effective protective structures.This study focuses on the angle gradient and...The high variability of shock in terrorist attacks poses a threat to people's lives and properties,necessitating the development of more effective protective structures.This study focuses on the angle gradient and proposes four different configurations of concave hexagonal honeycomb structures.The structures'macroscopic deformation behavior,stress-strain relationship,and energy dissipation characteristics are evaluated through quasi-static compression and Hopkinson pressure bar impact experiments.The study reveals that,under varying strain rates,the structures deform starting from the weak layer and exhibit significant interlayer separation.Additionally,interlayer shear slip becomes more pronounced with increasing strain rate.In terms of quasi-static compression,symmetric gradient structures demonstrate superior energy absorption,particularly the symmetric negative gradient structure(SNG-SMS)with a specific energy absorption of 13.77 J/cm~3.For dynamic impact,unidirectional gradient structures exhibit exceptional energy absorption,particularly the unidirectional positive gradient honeycomb structure(UPG-SML)with outstanding mechanical properties.The angle gradient design plays a crucial role in determining the structure's stability and deformation mode during impact.Fewer interlayer separations result in a more pronounced negative Poisson's ratio effect and enhance the structure's energy absorption capacity.These findings provide a foundation for the rational design and selection of seismic protection structures in different strain rate impact environments.展开更多
Crushed rock subgrade, as one of the roadbed-cooling methods, has been widely used in the Qinghai-Tibet Railway. Much attention has been paid on the cooling effect of crushed rock; however, the mechanical properties o...Crushed rock subgrade, as one of the roadbed-cooling methods, has been widely used in the Qinghai-Tibet Railway. Much attention has been paid on the cooling effect of crushed rock; however, the mechanical properties of crushed rock are somehow neglected. Based on the discrete element method, biaxial compression test condition for crushed rock is com- piled in FISH language in PFC2D, and the natural shape of crushed rock is simulated with super particle ＂cluster＂. The ef- fect of particle size, crushed rock strength and confining pressure level on overall mechanical properties of the crushed rock aggregate are respectively analyzed. Results show that crushed rock of large particle size plays an essential frame- work role, which is mainly responsible for the deformation of crushed rock aggregate. The strength of gravel has a great influence on overall mechanical properties which means that strength attenuation caused by the freeze thaw cycles cannot be ignored. The stress-strain curves can be divided into two stages including shear contraction and shear expansion at different confining pressures.展开更多
Crushing is a size reduction process that plays a key role in both mineral processing and crushing–screening plant design. Investigations on rock crushability have become an important issue in mining operations and t...Crushing is a size reduction process that plays a key role in both mineral processing and crushing–screening plant design. Investigations on rock crushability have become an important issue in mining operations and the manufacture of industrial crusher equipment. The main objective of this research is to quantify the crushability of hard rocks based on their mineralogical and mechanical properties. For this purpose, the mineralogical, physical, and mechanical properties of various hard rocks were determined. A new compressive crushing value(CCV) testing methodology was proposed. The results obtained from CCV tests were compared with those from mineralogical inspections, rock strength as well as mechanical aggregate tests. Strong correlations were found between CCV and several rock and aggregate properties such as uniaxial compressive strength(UCS), the brittleness index(S_(20)), and aggregate impact value(AIV). Furthermore, the relationship between the mineralogical properties of the rocks and their CCVs were established. It is concluded that the proposed testing methodology is simple and highly repeatable and could be utilized as a pre-design tool in the design stage of the crushing process for rock quarries.展开更多
The backfill should keep stable in the primary stope when mining an adjacent secondary stope in subsequent open stoping mining methods,and the large-size mined-out area is usually backfilled by multiple backfilling be...The backfill should keep stable in the primary stope when mining an adjacent secondary stope in subsequent open stoping mining methods,and the large-size mined-out area is usually backfilled by multiple backfilling before the recovery of a secondary stope,resulting in a layered structure of backfill in stope.Therefore,it is significant to investigate the deformation responses and mechanical properties of stratified cemented tailings backfill(SCTB)with different layer structures to remain self-standing as an artificial pillar in the primary stope.The current work examined the effects of enhance layer position(1/3,1/2,and 2/3)and thickness ratio(0,0.1,0.2,and 0.3)on the mechanical properties,deformation,energy evolution,microstructures,and failure modes of SCTB.The results demonstrate that the incorporation of an enhance layer significantly strengthens the deformation and strength of SCTB.Under a confining pressure of 50 kPa,the peak deviatoric stress rises from 525.6 to 560.3,597.1,and 790.5 kPa as the thickness ratio of enhance layer is increased from 0 to 0.1,0.2,and 0.3,representing a significant increase of 6.6%,13.6%,and 50.4%.As the confining pressure increases,the slopes of the curves in the elastic stage become steep,and the plastic phase is extended accordingly.Additionally,the incorporation of the enhance layer significantly improves the energy storage linit of SCTB specimen.As the thickness ratio of the enhance layer increases from 0 to 0.1,0.2,and 0.3,the elastic energy rises from 0.54 to 0.67,0.84,and 1.00 MJ·m^(-3),representing a significant increase of 24.1%,55.6%,and 85.2%.The internal friction angles and cohesions of the SCTB specimens are higher than those of the CTB specimens,however,the cohesion is more susceptible to enhance layer position and thickness ratio than the internal friction angle.The failure style of the SCTB specimen changes from shear failure to splitting bulging failure and shear bulging failure with the presence of an enhance layer.The crack propagation path is significantly blocked by the enhance layer.The findings are of great significance to the application and stability of the SCTB in subsequent stoping backfilling mines.展开更多
The progressive failure characteristics of geomaterial are a remarkable and challenging topic in geotechnical engineering.To study the effect of salt content and temperature on the progressive failure characteristics ...The progressive failure characteristics of geomaterial are a remarkable and challenging topic in geotechnical engineering.To study the effect of salt content and temperature on the progressive failure characteristics of frozen sodium sulfate saline sandy soil,a series of uniaxial compression tests were performed by integrating digital image correlation(DIC)technology into the testing apparatus.The evolution law of the uniaxial compression strength(UCS),the failure strain,and the formation of the shear band of the frozen sodium sulfate saline sandy soil were analyzed.The test results show that within the scope of this study,with the increase of salt content,both the UCS and the shear band angle initially decrease with increasing salt content before showing an increase.In contrast,the failure strain and the width of the shear band exhibit an initial increase followed by a decrease in the samples.In addition,to investigate the brittle failure characteristics of frozen sodium sulfate saline sandy soil,two classic brittleness evaluation methods were employed to quantitatively assess the brittleness level for the soil samples.The findings suggest that the failure characteristics under all test conditions in this study belong to the transition stage between brittle and ductile,indicating that frozen sodium sulfate saline sandy soil exhibits certain brittle behavior under uniaxial compression conditions,and the brittleness index basically decreases and then increases with the rise in salt content.展开更多
基金Doctoral Startup Fund(20192066,20212028)Laijin Excellent Doctoral Fund(20202021)+1 种基金Scientific and Technological Innovation of Colleges and Universities in Shanxi Province(2020L0342)Fundamental Research Program of Shanxi Province(202303021222178)。
文摘SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminum foams was investigated.The macro/micro-features of the aluminum foams were characterized and analyzed.Results demonstrate that an appropriate increase in SiC content and the uniform distribution of SiC can improve the foaming stability,optimize the cell diameter and cell wall thickness,ameliorate the cell distribution,and enhance the hardness and compressive strength of the aluminum foams.However,either insufficient or excessive SiC leads to uneven distribution of SiC particles,which is unfavorable to foaming stability and good cell structure formation.With 6wt%SiC,both the foaming stability and cell structure of the aluminum foam reach the optimal state,resulting in the highest compressive strength and optimal energy absorption capacity.
基金supported by Anhui Provincial Natural Science Foundation(2408085QA030)Natural Science Research Project of Anhui Educational Committee,China(2022AH050825)+3 种基金Medical Special Cultivation Project of Anhui University of Science and Technology(YZ2023H2C008)the Excellent Research and Innovation Team of Anhui Province,China(2022AH010052)the Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology,China(2021yjrc51)Collaborative Innovation Program of Hefei Science Center,CAS,China(2019HSC-CIP006).
文摘In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical model,and its validity was verified using a simple impact test.A crushable discrete element method(DEM)framework is built based on the previously established theoretical model.The tensile strength,which considers the fractal theory,size effect,and Weibull variation,was assigned to each generated particle.The assigned strength is then used for crush detection by comparing it with its maximum tensile stress.Mass conservation is ensured by inserting a series of sub-particles whose total mass was equal to the quality loss.Based on the crushable DEM framework,a numerical simulation of the crushing behavior of a pebble bed with hollow cylindrical geometry under a uniaxial compression test was performed.The results of this investigation showed that the particle withstands the external load by contact and sliding at the beginning of the compression process,and the results confirmed that crushing can be considered an important method of resisting the increasing external load.A relatively regular particle arrangement aids in resisting the load and reduces the occurrence of particle crushing.However,a limit exists to the promotion of resistance.When the strain increases beyond this limit,the distribution of the crushing position tends to be isotropic over the entire pebble bed.The theoretical model and crushable DEM framework provide a new method for exploring the pebble bed in a fusion reactor,considering particle crushing.
基金supported by the National Key R&D Program of China[Grant No.2023YFF0713600]the National Natural Science Foundation of China[Grant No.62275062]+3 种基金Project of Shandong Innovation and Startup Community of High-end Medical Apparatus and Instruments[Grant No.2023-SGTTXM-002 and 2024-SGTTXM-005]the Shandong Province Technology Innovation Guidance Plan(Central Leading Local Science and Technology Development Fund)[Grant No.YDZX2023115]the Taishan Scholar Special Funding Project of Shandong Provincethe Shandong Laboratory of Advanced Biomaterials and Medical Devices in Weihai[Grant No.ZL202402].
文摘Photoacoustic-computed tomography is a novel imaging technique that combines high absorption contrast and deep tissue penetration capability,enabling comprehensive three-dimensional imaging of biological targets.However,the increasing demand for higher resolution and real-time imaging results in significant data volume,limiting data storage,transmission and processing efficiency of system.Therefore,there is an urgent need for an effective method to compress the raw data without compromising image quality.This paper presents a photoacoustic-computed tomography 3D data compression method and system based on Wavelet-Transformer.This method is based on the cooperative compression framework that integrates wavelet hard coding with deep learning-based soft decoding.It combines the multiscale analysis capability of wavelet transforms with the global feature modeling advantage of Transformers,achieving high-quality data compression and reconstruction.Experimental results using k-wave simulation suggest that the proposed compression system has advantages under extreme compression conditions,achieving a raw data compression ratio of up to 1:40.Furthermore,three-dimensional data compression experiment using in vivo mouse demonstrated that the maximum peak signal-to-noise ratio(PSNR)and structural similarity index(SSIM)values of reconstructed images reached 38.60 and 0.9583,effectively overcoming detail loss and artifacts introduced by raw data compression.All the results suggest that the proposed system can significantly reduce storage requirements and hardware cost,enhancing computational efficiency and image quality.These advantages support the development of photoacoustic-computed tomography toward higher efficiency,real-time performance and intelligent functionality.
基金supported by the Science and Technology Innovation Key R&D Program of Chongqing(CSTB2025TIAD-STX0032)National Key Research and Development Program of China(2024YFF0908200)+1 种基金the Chongqing Technology Innovation and Application Development Special Key Project(CSTB2024TIAD-KPX0018)the Southwest University Graduate Student Research Innovation(SWUB24051)。
文摘Dear Editor,The letter proposes a tensor low-rank orthogonal compression(TLOC)model for a convolutional neural network(CNN),which facilitates its efficient and highly-accurate low-rank representation.Model compression is crucial for deploying deep neural network(DNN)models on resource-constrained embedded devices.
基金supported by ZTE Industry-University-Institute Cooperation Funds under Grant No.IA20240319003the NSFC under Grant No.62571112。
文摘To achieve the potential performance gain of massive multiple-input multiple-output(MIMO)systems,base stations(BS)require downlink channel state information(CSI)fed back by users to execute beamforming design,especially in the frequency division duplex(FDD)systems.However,due to the enormous number of antennas in massive MIMO systems,the feedback overhead of downlink CSI acquisition is extremely large.To address this issue,deep learning(DL)techniques have been introduced to de velop high-accuracy feedback strategies under limited backhaul constraints.In this paper,we provide an overview of DL-based CSI compression and feedback approaches in massive MIMO systems.Specifically,we introduce the conventional CSI compression and feedback schemes and the existing problems.Besides,we elaborate on various DL techniques employed in CSI compression from the perspective of network architecture and analyze the advantages of different techniques.We also enumerate the applications of DL-based methods for solving practical challenges in CSI compression and feedback.In addition,we brief the remaining issues in deep CSI compression and indicate potential directions in future wireless networks.
基金supported by the National Natural Science Foundation of China(Grant No.42277147)Ningbo Public Welfare Research Program(Grant No.2024S081)Ningbo Natural Science Foundation(Grant No.2024J186).
文摘Rock brittleness is a critical property in geotechnical and energy engineering,as it directly influences the prediction of rock failure and stability assessment.Although numerous methods have been developed to evaluate brittleness,many fail to comprehensively account for the impacts of microstructural changes,mineralogical characteristics,and stress conditions on energy evolution during failure.This study proposes a novel approach for brittleness evaluation based on the energy evolution throughout the post-peak failure process,integrating two micromechanical mechanisms:crack propagation and frictional sliding.A new brittleness index is defined as the ratio of generated surface energy to released elastic energy,providing a unified framework for assessing both Class I and Class II mechanical behaviors.The brittleness of cyan,white,and gray sandstones was investigated under various confining pressures and moisture conditions using X-ray diffraction(XRD),scanning electron microscopy(SEM),and conventional triaxial compression(CTC)tests.The results demonstrate that brittleness decreases with increasing confining pressure,due to suppressed crack propagation,and increases under saturated conditions,as moisture enhances crack propagation.By establishing connections between mineral composition,microstructural features,and stress-induced responses,the proposed method overcame limitations of previous approaches and offered a more precise tool for evaluating rock brittleness under diverse environmental scenarios.
基金supported by the National Natural Science Foundation of China(U2341288 and 12302492)。
文摘An in-depth understanding of the behaviours of solid propellants under low-velocity impact loads is crucial for enhancing their safety in applications such as aerospace propulsion.This study investigated the dynamic responses of single ammonium perchlorate(AP)/octogen(HMX)particles embedded in a hydroxyl-terminated polybutadiene(HTPB)binder under dynamic compression loading via real-time synchrotron-based X-ray phase contrast imaging and a modified split Hopkinson pressure bar(SHPB)system.The compression of the viscoelastic binder and subsequent dynamic fracturing of the AP/HMX particles were captured.During compression,transverse cracks developed within the AP particles,and their propagation led to particle fracturing,resulting in ductile fracturing.Unlike AP,HMX generated numerous short cracks within the internal and edge regions simultaneously,leading to fragmentation and brittle fracturing.Moreover,particle damage reduced the modulus of the sample,shifting its dynamic stress response from nonlinear elasticity to strain softening and further strain hardening as the binder exhibited plastic deformation.A compression simulation incorporating a real particle microscopic structure was established to study the mechanical response of the interface and particles.The simulation results agreed with the experimental observations.These results indicate that the shear stress at the HTPB-AP interface is greater than that at the HTPB-HMX interface,which is a factor influencing the differences in the mesoscale damage mechanisms of the particles.
基金support from the National Natural Science Foundation of China(Grant No.U24A20105 and 52071209)the Major Scientific and Technological Innovation Project of CITIC Group(Grant No.2022ZXKYA06100,with Hongzhou Lu as the principal grant recipient)the Program of Shanghai Academic and Technology Research Leader(Grant No.18XD1402200).
文摘Micropillar compression tests were used to investigate the influence of hydrogen on the deformation behavior and hydrogen embrittlement(HE)of nitrogen-alloyed austenitic stainless steel QN_(2)109.Results indicate that the hydrogen increases the dislocation density,reduces the yield stress,and accelerates the formation and intersection of slip bands,with hydrogen-induced cracks initiating at slip band intersections.X-ray diffraction confirms the absence of martensitic transformation,ruling out the role of martensitic transformation in HE.The micropillar compression technique is highly sensitive for characterizing hydrogen-material interactions,owing to the material’s low hydrogen diffusivity and the small size of its hydrogen-affected zone.These findings align with the hydrogen-enhanced localized plasticity mechanism.
基金Youth Innovation Team of Shandong Higher Education Institutions,Grant/Award Number:2022KJ214Shandong Postdoctoral Science Foundation,Grant/Award Number:SDCXZG‐202303031+2 种基金China Postdoctoral Science Foundation,Grant/Award Number:2023M732109National Natural Science Foundation of China,Grant/Award Number:52209141Natural Science Foundation of Shandong Province,China,Grant/Award Number:ZR2021QE069。
文摘The deformation and failure of coal walls in front of a working face cause significant difficulties during mining operations.This study reveals the nonuniform distribution of bearing pressure in front of coal walls based on in situ monitoring data and numerical simulation.Therefore,an eccentric compression mechanical model was established to study the deformation and failure characteristics of a coal wall.The slenderness ratio of the compression bar is introduced to define coal walls.The results showed that instability failure occurs when λ>λ_(c) and material failure occurs when λ≤λ_(c).The instability failure-type coal wall spalling was related to the mining height,eccentricity of roof pressure,the horizontal force,and the reaction moment of the floor.The material failure-type coal wall spalling was related to the cohesion,the internal friction angle of the coal,the upper pressure,and the horizontal force of coal walls.Unstable and destructive coal wall peeling usually occurs at a height of 0.5–0.6 times the mining height,while material damage to coal wall peeling is determined to occur within the range of 0.4-0.6 times the mining depth.The findings contribute to the understanding of the deformation and failure of coal walls.
基金supported by the National Natural Science Foundation of China(Grant No.52339001).
文摘To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-ray computed tomography were combined to obtain the strain distribution over the sample surface and internal fractures of the samples.The Gini and skewness(G-S)coefficients were used to quantify strain localization during tests,where the Gini coefficient reflects the degree of clustering of elements with high strain values,i.e.,strain localization/delocalization.The strain localization-induced asymmetry of data distribution is quantified by the skewness coefficient.A precursor to granite failure is defined by the rapid and simultaneous increase of the G-S coefficients,which are calculated from strain increment,giving an earlier warning of failure by about 8%peak stress than those from absolute strain values.Moreover,the process of damage accumulation due to stress-driven crack propagation in Beishan granite is different at various confining pressures as the stress exceeds the crack initiation stress.Concretely,strain localization is continuous until brittle failure at higher confining pressure,while both strain localization and delocalization occur at lower confining pressure.Despite the different stress conditions,a similar statistical characteristic of strain localization during the creep stage is observed.The Gini coefficient increases,and the skewness coefficient decreases slightly as the creep stress is below 95%peak stress.When the accelerated strain localization begins,the Gini and skewness coefficients increase rapidly and simultaneously.
基金support from the National Natural Science Foundation of China(Grant Nos.52104207 and 52374214)the Shandong Provincial Youth Innovation Team Development Program for Higher Education Institutions(Grant No.2023KJ305).
文摘In the field of rock engineering,the influence of water is a dynamic process that exhibits varying effects over time and across different locations.To further understand how water influences the mechanical properties and acoustic emission(AE)behavior of rocks,this study conducted uniaxial compression experiments on sandstones with varying degrees of wetting under both natural conditions and water-chemical environments.In addition,the study combined AE equipment with digital image correlation(DIC)to monitor the entire failure process.Using the sliding window algorithm,the variation in the variance of AE characteristic parameters during the process of sandstone loading to failure is analyzed from the perspective of critical slowing down.This analysis enables the effective identification of the early warning signal before failure.The experimental findings suggest that an increase in wetting height results in a gradual decrease in peak stress,accompanied by a concomitant increase in the percentage of shear cracks.The characteristic parameters,including energy,amplitude,and ringing count,all exhibit critical slowing phenomena.The waveform of AE characteristic parameters of the same sample is similar,and the mutation time of the precursor signal is roughly the same.All signals appear in the irreversible plastic deformation stage of microcrack initiation.The integration of critical slowing down theory and the b-value early warning method facilitates a more comprehensive evaluation of the stability of rock mass,thereby significantly enhancing the efficiency and safety of disaster prevention measures.
基金partially supported by the Center for Advanced Systems Understanding(CASUS)financed by Germany’s Federal Ministry of Education and Research(BMBF)+2 种基金the Saxon State Government out of the State Budget approved by the Saxon State Parliamentfunding from the European Union’s Just Transition Fund(JTF)within the project Röntgenlaser-Optimierung der Laserfusion(ROLF),Contract No.5086999001co-financed by the Saxon State Government out of the State Budget approved by the Saxon State Parliament.
文摘We present the first systematic experimental validation of return-current-driven cylindrical implosion scaling in micrometer-sized Cu and Al wires irradiated by J-class femtosecond laser pulses.Employing XFEL-based imaging with sub-micrometer spatial and femtosecond temporal resolution,supported by hydrodynamic and particle-in-cell simulations,we reveal how return current density depends precisely on wire diameter,material properties,and incident laser energy.We identify deviations from simple theoretical predictions due to geometrically influenced electron escape dynamics.These results refine and confirm the scaling laws essential for predictive modeling in high-energy-density physics and inertial fusion research.
基金Supported by Natural Sciences and Engineering Research Council of Canada, Alberta Energy Research Institute and the Department of Civil Engineering at University of Calgary
文摘Grain crushing plays an important role in one-dimensional (1D) compression and creep behaviors of granular materials under high stress. It is clear that the macro-properties of granular materials are closely related to the micro-fracture properties of grains in 1D compression and creep tests. In this paper, a series of 1D compression and creep tests were performed on Ottawa sand to investigate the deformation and grain crushing properties of granular materials, and it shows that the void ratio is correlated to the grain crushing amount (the quantity of crushed grains) for granular materials subjected to grain crushing. The test results, combining with the existing test data related to grain crushing of granular materials, were used to verify the relation. Moreover, the implications of these relations on the yield of granular material, and the equivalent effect of stress and time in changing soil fabric are presented.
基金partially supported by the National Natural Science Foundation of China(Grant Nos.41372304 and 51679198),and China Scholarship Council Fellowship awarded to the first author.The authors are grateful to Dr.Yibing Deng of the University of Massachusetts Amherst for acquiring the optical images of sand particles.
文摘An experimental study is presented to measure the elastic,yielding,and crushing properties of individual particles under compression using substrates made of aluminum alloy,stainless steel,and sapphire.Carefully selected,highly spherical individual Ottawa sand particles of 0.75e1.1 mm in nominal diameter were compressed between two smooth substrates,and the loadedeformation curves were analyzed by Hertz elastic contact theory to derive their reduced modulus and Young’s modulus as well as yielding and crushing strengths,which vary significantly with the type of substrate materials.Further analysis of the yielding and plastic deformation at the particle-substrate contact shows that the yield strength or hardness of the substrate materials dominates the local contact behavior and hence affects the measured apparent yielding and crushing strengths.The two softer substrates(aluminum alloy and stainless steel)actually lead to underestimated apparent shear yield strengths of quartz particles by 60.4%and 54.2%,respectively,which are actually the yielding of substrates,while the true particle yielding occurs in the sapphire-particle contact.Moreover,the two softer substrates cause much overestimated crushing strengths of the quartz particles by 50.4%and 36.4%,respectively.Selection of inappropriate substrate materials and inappropriate interpretation of the particle-substrate contact can lead to significant errors in the measured yielding and crushing strengths.It is recommended that single particle compression testing uses substrates with yield strength greater than that of the tested particles and result interpretation also considers the elastic and yielding behaviors of the substrates.
基金Funded by the National Natural Science Foundation of China(No.U1362205)the Natural Science Foundation of Jiangsu Province(No.SBK2014040489)+2 种基金the National High Technology Research and Development Program of China(No.2012AA03A203)the Beijing Youth Talent Plan(No.YETP0492)the 2014 Open Project of State Key Laboratory of OrganicInorganic Composites
文摘We investigated the effect of structural factor and amide grafted multi-walled carbon nanotubes（MWNTs-NH2） on crushing characteristics of filament wound CFRP tube under quasi-static compression conditon. It was found that CFRP tubes sequentially showed the brittle fracturing mode, the local buckling fracturing mode and transverse shearing fracturing mode with increasing winding angle, respectively, with the characterizations by mechanical testing, SEM and optical microscopy. Moreover, crack propagation initiated by pre-crack and subsequent failure in the tube were strongly dependent on pre-crack angle due to defl ection and penetration competition of crack evolution. The simulated compression failure behavior correlated well with the experimental results, revealing that the Chang-Chang failure criterion was effective in representing the quasistatic crushing characteristics of the tube. In addtion, the MWNTs-NH2 were sucessfully obtained by multistep functionization. The compressvie properties of the tubes were signifi cantly improved by the addition of the MWNTs-NH2 due to their uniform dispersion and high interfacial chemical reactivity, whereas the as-received MWNTs and other functionalized MWNTs were not as effective.
基金financially supported by National Natural Science Foundation of China,China (Grant No.52022012)National Key R&D Program for Young Scientists of China,China (Grant No.2022YFC3080900)。
文摘The high variability of shock in terrorist attacks poses a threat to people's lives and properties,necessitating the development of more effective protective structures.This study focuses on the angle gradient and proposes four different configurations of concave hexagonal honeycomb structures.The structures'macroscopic deformation behavior,stress-strain relationship,and energy dissipation characteristics are evaluated through quasi-static compression and Hopkinson pressure bar impact experiments.The study reveals that,under varying strain rates,the structures deform starting from the weak layer and exhibit significant interlayer separation.Additionally,interlayer shear slip becomes more pronounced with increasing strain rate.In terms of quasi-static compression,symmetric gradient structures demonstrate superior energy absorption,particularly the symmetric negative gradient structure(SNG-SMS)with a specific energy absorption of 13.77 J/cm~3.For dynamic impact,unidirectional gradient structures exhibit exceptional energy absorption,particularly the unidirectional positive gradient honeycomb structure(UPG-SML)with outstanding mechanical properties.The angle gradient design plays a crucial role in determining the structure's stability and deformation mode during impact.Fewer interlayer separations result in a more pronounced negative Poisson's ratio effect and enhance the structure's energy absorption capacity.These findings provide a foundation for the rational design and selection of seismic protection structures in different strain rate impact environments.
基金supported by National 973 Project of China (No. 2012CB026104)National Natural Science Foundation of China (Nos. 41171064, 41371081)the Fundamental Research Funds for the Central Universities (No. 2011JBZ009)
文摘Crushed rock subgrade, as one of the roadbed-cooling methods, has been widely used in the Qinghai-Tibet Railway. Much attention has been paid on the cooling effect of crushed rock; however, the mechanical properties of crushed rock are somehow neglected. Based on the discrete element method, biaxial compression test condition for crushed rock is com- piled in FISH language in PFC2D, and the natural shape of crushed rock is simulated with super particle ＂cluster＂. The ef- fect of particle size, crushed rock strength and confining pressure level on overall mechanical properties of the crushed rock aggregate are respectively analyzed. Results show that crushed rock of large particle size plays an essential frame- work role, which is mainly responsible for the deformation of crushed rock aggregate. The strength of gravel has a great influence on overall mechanical properties which means that strength attenuation caused by the freeze thaw cycles cannot be ignored. The stress-strain curves can be divided into two stages including shear contraction and shear expansion at different confining pressures.
基金financially supported by Zonguldak Bülent Ecevit University(No.2016-98150330-01)
文摘Crushing is a size reduction process that plays a key role in both mineral processing and crushing–screening plant design. Investigations on rock crushability have become an important issue in mining operations and the manufacture of industrial crusher equipment. The main objective of this research is to quantify the crushability of hard rocks based on their mineralogical and mechanical properties. For this purpose, the mineralogical, physical, and mechanical properties of various hard rocks were determined. A new compressive crushing value(CCV) testing methodology was proposed. The results obtained from CCV tests were compared with those from mineralogical inspections, rock strength as well as mechanical aggregate tests. Strong correlations were found between CCV and several rock and aggregate properties such as uniaxial compressive strength(UCS), the brittleness index(S_(20)), and aggregate impact value(AIV). Furthermore, the relationship between the mineralogical properties of the rocks and their CCVs were established. It is concluded that the proposed testing methodology is simple and highly repeatable and could be utilized as a pre-design tool in the design stage of the crushing process for rock quarries.
基金financially supported by the Fundamental Research Funds for the Central Universities,China(No.2023JCCXNY01)Guangxi Key Technologies R&D Program,China(No.2022AB31022).
文摘The backfill should keep stable in the primary stope when mining an adjacent secondary stope in subsequent open stoping mining methods,and the large-size mined-out area is usually backfilled by multiple backfilling before the recovery of a secondary stope,resulting in a layered structure of backfill in stope.Therefore,it is significant to investigate the deformation responses and mechanical properties of stratified cemented tailings backfill(SCTB)with different layer structures to remain self-standing as an artificial pillar in the primary stope.The current work examined the effects of enhance layer position(1/3,1/2,and 2/3)and thickness ratio(0,0.1,0.2,and 0.3)on the mechanical properties,deformation,energy evolution,microstructures,and failure modes of SCTB.The results demonstrate that the incorporation of an enhance layer significantly strengthens the deformation and strength of SCTB.Under a confining pressure of 50 kPa,the peak deviatoric stress rises from 525.6 to 560.3,597.1,and 790.5 kPa as the thickness ratio of enhance layer is increased from 0 to 0.1,0.2,and 0.3,representing a significant increase of 6.6%,13.6%,and 50.4%.As the confining pressure increases,the slopes of the curves in the elastic stage become steep,and the plastic phase is extended accordingly.Additionally,the incorporation of the enhance layer significantly improves the energy storage linit of SCTB specimen.As the thickness ratio of the enhance layer increases from 0 to 0.1,0.2,and 0.3,the elastic energy rises from 0.54 to 0.67,0.84,and 1.00 MJ·m^(-3),representing a significant increase of 24.1%,55.6%,and 85.2%.The internal friction angles and cohesions of the SCTB specimens are higher than those of the CTB specimens,however,the cohesion is more susceptible to enhance layer position and thickness ratio than the internal friction angle.The failure style of the SCTB specimen changes from shear failure to splitting bulging failure and shear bulging failure with the presence of an enhance layer.The crack propagation path is significantly blocked by the enhance layer.The findings are of great significance to the application and stability of the SCTB in subsequent stoping backfilling mines.
基金supported by the National Natural Science Foundation of China(Grant Nos.42372312,and 42172299)the Pyramid Talent Training Project of Beijing University of Civil Engineering and Architecture(Grant No.JDYC20220807).
文摘The progressive failure characteristics of geomaterial are a remarkable and challenging topic in geotechnical engineering.To study the effect of salt content and temperature on the progressive failure characteristics of frozen sodium sulfate saline sandy soil,a series of uniaxial compression tests were performed by integrating digital image correlation(DIC)technology into the testing apparatus.The evolution law of the uniaxial compression strength(UCS),the failure strain,and the formation of the shear band of the frozen sodium sulfate saline sandy soil were analyzed.The test results show that within the scope of this study,with the increase of salt content,both the UCS and the shear band angle initially decrease with increasing salt content before showing an increase.In contrast,the failure strain and the width of the shear band exhibit an initial increase followed by a decrease in the samples.In addition,to investigate the brittle failure characteristics of frozen sodium sulfate saline sandy soil,two classic brittleness evaluation methods were employed to quantitatively assess the brittleness level for the soil samples.The findings suggest that the failure characteristics under all test conditions in this study belong to the transition stage between brittle and ductile,indicating that frozen sodium sulfate saline sandy soil exhibits certain brittle behavior under uniaxial compression conditions,and the brittleness index basically decreases and then increases with the rise in salt content.
