Carbon emissions from forest fires are considered an important factor of ecosystem carbon balance and global climate change. Carbon emissions from Japanese red pine stands （Pinus densiflora S. et Z.） burned by crown...Carbon emissions from forest fires are considered an important factor of ecosystem carbon balance and global climate change. Carbon emissions from Japanese red pine stands （Pinus densiflora S. et Z.） burned by crown fire were estimated at Mt. Palgong in Daegu Metropolitan City, and crown fuel characteristics, including crown bulk density, crown base height, and fuel moisture content of Japanese red pine, were analyzed. Total biomass combusted was calculated by subtracting the biomass of burned stands from that of unburned stands exhibiting similar stand structures and site environments. Ten trees in the unburned area and five trees in the burned area were cut by using direct harvesting techniques to estimate crown layer biomass. All biomass sampled was oven-dried and weighed. The dry weight ratios of stems, branches, and needles were 7o%, 21%, and 9%, respectively. The available fuel load susceptible to combustion during the crown fire spread was equivalent to 55% of the crown layer biomass. The crown bulk density was 0.24 kg/m3 on average. The estimated amount of CO2 was 23,454 kg CO2/ha for the crown layer. These results will be useful for calculating the amount of CO2 emitted from forest fires and for developing a forest carbon model in P. densiflora forests.展开更多
Crown fire damage is a mixture of three principal fire-related components:charred material,scorched foliage,and unaltered green canopy.This study estimated the abundance of these physical alterations in two immediate ...Crown fire damage is a mixture of three principal fire-related components:charred material,scorched foliage,and unaltered green canopy.This study estimated the abundance of these physical alterations in two immediate post-fire Mediterranean forest contexts(Portugal and Italy)by applying linear spectral mixture analysis(LSMA)on Sentinel-2 imagery.The tree crowns fire damage was subsequently mapped,integrating fractional abundance information in a random forest(RF)algorithm,comparing the accuracy resulting from the adoption of generic or image spectral libraries as the primary investigative goal.Although image-derived endmembers resulted in more effectiveness in terms of fire-related components abundance quantification(LMSAderived RMSE<0.1),the F-scores always were≥90%whether generic endmembers or image endmembers derived information was employed.The environmental heterogeneity of the two study areas affected the fire severity gradients,with a prevalence of the charred(PT)(45–46%)and green class(IT)(44–53%).Post-fire temporal monitoring was initialized by applying the proposed strategies,and the preliminary results showed a positive recovery trend in forest vegetation from the first year following the fire event,with a reduced charcoal predominance and an increasing proportion of green components.展开更多
Accurate crown control is paramount for ensuring the quality of hot-rolled strip products.Given the multitude of influencing parameters and the intricate coupling and genetic relationships among them,the conventional ...Accurate crown control is paramount for ensuring the quality of hot-rolled strip products.Given the multitude of influencing parameters and the intricate coupling and genetic relationships among them,the conventional crown control method is no longer sufficient to meet the precision requirements of schedule-free rolling.To address this limitation,an optimization framework for hot-rolled strip crown control was developed based on model-driven digital twin(MDDT).This framework enhances the strip crown control precision by facilitating collaborative operations among physical entities,virtual models,and functional application layers.In virtual modeling,a data-driven approach that integrates the extreme gradient boosting and the improved Harris hawk optimization algorithm was firstly proposed to fit the relationship between key process parameters and strip crown,and a global-local collaborative training strategy was proposed to enhance the model adaptability to diverse working conditions.Subsequently,the influence of crucial process factors on the virtual model was examined through model responses.Furthermore,a novel optimization mode for crown control based on MDDT was established by aligning and reconstructing both the physical and virtual models,thereby enhancing the crown control precision.Finally,data trials were conducted to validate the effectiveness of the proposed framework.The results indicated that the proposed method exhibited satisfactory performance and could be effectively utilized to improve the crown control precision.展开更多
The separation of lithium isotopes (^(6)Li and ^(7)Li) is of great importance for the nuclear industry.The lithium amalgam method is the only lithium isotopes separation process in industry,and the extensive use of me...The separation of lithium isotopes (^(6)Li and ^(7)Li) is of great importance for the nuclear industry.The lithium amalgam method is the only lithium isotopes separation process in industry,and the extensive use of mercury has raised concerns about its potential environmental hazards,which have prompted the search for more efficient and environmentally friendly alternatives.Crown ethers can bind lithium ions highly selectively and separate lithium isotopes effectively.A chemical exchange-based lithium isotopes separation method using crown ether decorated materials could be a viable and cost-effective alternative to the lithium amalgam method.In this review,we provide a systematic summary of the recent advances in lithium isotopes separation using crown ethers decorated materials.展开更多
The authors regret that the declaration of Acknowledgement as below is missing in the paper:AcknowledgementWe are grateful to the Department of Biology and Postgraduate Sciences-Biology of the Universidad del Valle,Ca...The authors regret that the declaration of Acknowledgement as below is missing in the paper:AcknowledgementWe are grateful to the Department of Biology and Postgraduate Sciences-Biology of the Universidad del Valle,Cali-Colombia for their support of the project;to Wilmar Torres MSc.for his statistical advice;to the biologist Helen Burnham MSc.for the translation of the document;to Isabel Castro and all the members of the Ornithology and Animal Behaviour Laboratory-OYCA of Universidad del Valle for their invaluable support in the field.We sincerely thank the anonymous re-viewers for their invaluable feedback and contributions to our manuscript.展开更多
Anion exchange membrane(AEM)fuel cells require membranes with a balance of high conductivity and durability.In this work,a novel bi-crown-ether modified piperidine structure was designed and synthesized,which was then...Anion exchange membrane(AEM)fuel cells require membranes with a balance of high conductivity and durability.In this work,a novel bi-crown-ether modified piperidine structure was designed and synthesized,which was then introduced into the side chain of poly(arylene piperidinium),making a unique bi-crown-ether modified bi-piperidinium side chain grafted polymer for AEM fabrication.The double crown ether units enhanced cation–water interactions and promoted microphase separation,thereby forming efficient hydroxide ion transport channels.The resulting membrane exhibited high water uptake,well-defined ion clusters,and a hydroxide conductivity of 123 mS cm^(-1) at 80℃ with an ion exchange capacity(IEC)of 1.56 mmol g^(-1).After alkaline treatment in 1 M NaOH at 80℃ for 960 h,the membrane retained~85%of its initial conductivity,demonstrating excellent chemical stability.In H2/O2 fuel cell tests at 60℃ ,the membrane achieved a peak power density of 558 mW cm-2 at 1040 mA cm-2.These findings highlight the potential of bi-crown-ether modified piperidinium side chain grafting as an effective strategy to enhance ion conduction properties of AEMs for fuel cell applications.展开更多
In this study,we used an extensive sampling network established in central Romania to develop tree height and crown length models.Our analysis included more than 18,000 tree measurements from five different species.In...In this study,we used an extensive sampling network established in central Romania to develop tree height and crown length models.Our analysis included more than 18,000 tree measurements from five different species.Instead of building univariate models for each response variable,we employed a multivariate approach using seemingly unrelated mixed-effects models.These models incorporated variables related to species mixture,tree and stand size,competition,and stand structure.With the inclusion of additional variables in the multivariate seemingly unrelated mixed-effects models,the accuracy of the height prediction models improved by over 10% for all species,whereas the improvement in the crown length models was considerably smaller.Our findings indicate that trees in mixed stands tend to have shorter heights but longer crowns than those in pure stands.We also observed that trees in homogeneous stand structures have shorter crown lengths than those in heterogeneous stands.By employing a multivariate mixed-effects modelling framework,we were able to perform cross-model random-effect predictions,leading to a significant increase in accuracy when both responses were used to calibrate the model.In contrast,the improvement in accuracy was marginal when only height was used for calibration.We demonstrate how multivariate mixed-effects models can be effectively used to develop multi-response allometric models that can be easily calibrated with a limited number of observations while simultaneously achieving better-aligned projections.展开更多
CdSe nanoplatelets(NPLs)are promising candidates for on-chip light sources,yet their performance is hindered by surface defects and inefficient optical gain.Herein,we demonstrate that CdSeS crown passivation significa...CdSe nanoplatelets(NPLs)are promising candidates for on-chip light sources,yet their performance is hindered by surface defects and inefficient optical gain.Herein,we demonstrate that CdSeS crown passivation significantly enhances the photophysical property of CdSe NPLs.Laser spectroscopy techniques reveal suppressed electronic and hole trapping at lateral surfaces,leading to a 4.2-fold increase in photoluminescence quantum yield and a shortened emission lifetime from13.5 to 4.8 ns.In addition,amplified spontaneous emission is achieved under nanosecond pulse pumping,with thresholds of0.75 to 0.16 mJ/cm^(2)for CdSe and CdSe/CdSeS NPLs,respectively.By integrating CdSe/CdSeS NPLs with high-refractiveindex SiO2scatters,coherent random lasing is realized at a threshold of 0.21 mJ/cm^(2).These findings highlight the critical role of lateral surface passivation in optimizing optical gain and pave the way for low-cost,multifunctional nanophotonic devices.展开更多
In recent years,with the rapid developme nt of the econo my and society,pollution of valuable metal ions in wastewater has become a major challenge to environmental sustainability.In order to solve the pollution cause...In recent years,with the rapid developme nt of the econo my and society,pollution of valuable metal ions in wastewater has become a major challenge to environmental sustainability.In order to solve the pollution caused by metal ions,researchers have conducted continuous re searches and explored various re mediation methods.Crown ether has attracted great attention because of its ionic radius and cavity size matching well with metal ions,which makes it have the ability to selectively complex metal ions.This unique property enables the directed removal and recovery of metal ions and makes crown ethers increasingly popular in extraction and separation processes.In this paper,the research progress of crown ethers in the extraction and separation of valuable metal ions was reviewed,with emphasis on the principles,extraction systems and the key factors affecting the extraction process.This study can provide some technical support for the application of separation and extraction of valuable metal ions by crown ether.展开更多
Eucalyptus forests are grown in many parts of the world for their commercial value and use in construction projects. Density management becomes im- portant as a means to attain the management goals in these forests. C...Eucalyptus forests are grown in many parts of the world for their commercial value and use in construction projects. Density management becomes im- portant as a means to attain the management goals in these forests. Changes in canopy and tree crown structure were quantified for Eucalyptus urophylla x E. grandis forests at different ages to determine when canopy closure occurs and the onset of competition begins. Site index was developed for these forests to determine whether site quality affects the canopy structure. Site index had little effect in the forests sampled, with the forest canopy on the better sites becoming slightly more elongated. Based upon crown projection ratio and crown diameter： dbh （diameter at breast height） ratio, it appears that crown closure occurs by age 4 years in these forests. The age at which this occurs was also checked and verified with the evaluation of relative spacing, RS （the ratio of the mean distance between trees to the average dominant height of the stand）. The RS value displayed a rapid decline until age 4 years, and then became relatively flat through age 21 years. The rapid height growth during the first 3 years with no change in density accounted for this rapid decrease. By age 4 years, reductions in the number of trees due to mortality began to have more of an influence on this value, resulting in a more gradual de- cline. The implications for management are discussed.展开更多
Objective] The study was aimed to improve the yield and quality of cashew. [Method] Through the comparative analysis, the survival rate, new germi-nation and yield characteristics of the cutting stems with different h...Objective] The study was aimed to improve the yield and quality of cashew. [Method] Through the comparative analysis, the survival rate, new germi-nation and yield characteristics of the cutting stems with different heights by stem grafting and bark grafting. [Result] The best cutting stem height of cashew should be in 100-150 cm, when the number of new germinated shoots was 85.5-87.7. Stem grafting could significantly improve the survival rate of the shooting branch （92.7%）, growth condition of which was better than that of bark grafting, and it also had no clip cortex. The yield of stem grafting was significantly higher than that of bark grafting, and it could reach up to 18.1 kg/plant in 4 years. The branches from stem grafting had significantly better ability in resisting the wind damage than those from bark grafting. [Conclusion] The study provided references for the crown grafting of cashew planting in China.展开更多
The program of the plate crown optimal prediction applied in the plate mill of Wuhan Iron and Steel(Group) Co. Ltd. is described. Optimal prediction is programmed in ALPHA 4000. The original profile, wear, expansion ...The program of the plate crown optimal prediction applied in the plate mill of Wuhan Iron and Steel(Group) Co. Ltd. is described. Optimal prediction is programmed in ALPHA 4000. The original profile, wear, expansion and deformation of work rolls are introduced into the program. The plate crown is controlled by the original profile of work rolls and the draft whose objective is the optimal plate crown. The run schedule is also optimized through the optimal prediction of the plate crown.展开更多
A flexible and adaptable design method for the tooth crown is presented based on the direct manipulation of free-form deformation （FFD）. The correct shape of the tooth crown can be obtained by adding, modifying, and...A flexible and adaptable design method for the tooth crown is presented based on the direct manipulation of free-form deformation （FFD）. The correct shape of the tooth crown can be obtained by adding, modifying, and deleting constraint points or load points based on stretching and compressing operation. Finally, an example is given to illustrate the method to be efficient.展开更多
Tree plantations are globally significant,and therefore,growth-related challenges cannot be ignored.Canopy structure and light environment influence the growth of plantations,but the precise relationship remains uncle...Tree plantations are globally significant,and therefore,growth-related challenges cannot be ignored.Canopy structure and light environment influence the growth of plantations,but the precise relationship remains unclear.We selected seven-year-old poplar plantations of varying cultivars planted various densities and measured their growth,canopy structure,and light environment.The findings indicate that poplar plantations of different cultivars and at different planting densities showed variations in leaf area index(LAI),average leaf angle(ALA),crown length(CL),length ratio(CLR),roundness(CR)and surface area(CSA),which directly or indirectly affect growth,resulting in disparities in their growing conditions.Crown roundness directly impacted growth,while LAI,CLR and ALA influenced growth indirectly by affecting intercellular carbon dioxide concentration.LAI and CLR had a positive effect;ALA had a negative one.Crown length and surface area directly and indirectly influenced growth by affecting photo synthetically active radiation and net photo synthetic rate,with direct impacts being more pronounced.This research has clarified the regulatory role of canopy structure in plantations growth,providing valuable insights for developing more effective management strategies.展开更多
Allometric equations are fundamental tools in ecological research and forestry management,widely used for estimating above-ground biomass and production,serving as the core foundations of dynamic vegetation models.Usi...Allometric equations are fundamental tools in ecological research and forestry management,widely used for estimating above-ground biomass and production,serving as the core foundations of dynamic vegetation models.Using global datasets from Tallo(a tree allometry and crown architecture database encompassing thousands of species)and TRY(a plant traits database),we fit B ayesian hierarchical models with three alternative functional forms(powerlaw,generalized Michaelis-Menten(gMM),and Weibull)to characterize how diameter at breast height(DBH),tree height(H),and crown radius(CR)scale with and without wood density as a species-level predictor.Our analysis revealed that the saturating Weibull function best captured the relationship between tree height and DBH in both functional groups,whereas the CR-DBH relationship was best predicted by a power-law function in angiosperms and by the gMM function in gymnosperms.Although including wood density did not significantly improve predictive performance,it revealed important ecological trade-offs:lighter-wood angiosperms achieve taller mature heights more rapidly,and denser wood promotes wider crown expansion across clades.We also found that accurately estimating DBH required considering both height and crown size,highlighting how these variables together distinguish trees of similar height but differing trunk diameters.Our results emphasize the importance of applying saturating functions for large trees to improve forest biomass estimates and show that wood density,though not always predictive at broad scales,helps illuminate the biomechanical and ecological constraints underlying diverse tree architectures.These findings offer practical pathways for integrating height-and crown-based metrics into existing carbon monitoring programs worldwide.展开更多
文摘Carbon emissions from forest fires are considered an important factor of ecosystem carbon balance and global climate change. Carbon emissions from Japanese red pine stands （Pinus densiflora S. et Z.） burned by crown fire were estimated at Mt. Palgong in Daegu Metropolitan City, and crown fuel characteristics, including crown bulk density, crown base height, and fuel moisture content of Japanese red pine, were analyzed. Total biomass combusted was calculated by subtracting the biomass of burned stands from that of unburned stands exhibiting similar stand structures and site environments. Ten trees in the unburned area and five trees in the burned area were cut by using direct harvesting techniques to estimate crown layer biomass. All biomass sampled was oven-dried and weighed. The dry weight ratios of stems, branches, and needles were 7o%, 21%, and 9%, respectively. The available fuel load susceptible to combustion during the crown fire spread was equivalent to 55% of the crown layer biomass. The crown bulk density was 0.24 kg/m3 on average. The estimated amount of CO2 was 23,454 kg CO2/ha for the crown layer. These results will be useful for calculating the amount of CO2 emitted from forest fires and for developing a forest carbon model in P. densiflora forests.
基金funded by the European Commission and the Regione Calabria with the POR Calabria FESR FSE 2014-2020source[CUP C39B18000070002]Joao M.N.Silva was funded by the Forest Research Centre,a research unit funded by Fundacao para a Ciência e a Tecnologia IP(FCT),Portugal(UIDB/00239/2020)by the project FireCast–Forecasting fire probability and characteristics for a habitable pyro environment,funded by FCT(PCIF/GRF/0204/2017).
文摘Crown fire damage is a mixture of three principal fire-related components:charred material,scorched foliage,and unaltered green canopy.This study estimated the abundance of these physical alterations in two immediate post-fire Mediterranean forest contexts(Portugal and Italy)by applying linear spectral mixture analysis(LSMA)on Sentinel-2 imagery.The tree crowns fire damage was subsequently mapped,integrating fractional abundance information in a random forest(RF)algorithm,comparing the accuracy resulting from the adoption of generic or image spectral libraries as the primary investigative goal.Although image-derived endmembers resulted in more effectiveness in terms of fire-related components abundance quantification(LMSAderived RMSE<0.1),the F-scores always were≥90%whether generic endmembers or image endmembers derived information was employed.The environmental heterogeneity of the two study areas affected the fire severity gradients,with a prevalence of the charred(PT)(45–46%)and green class(IT)(44–53%).Post-fire temporal monitoring was initialized by applying the proposed strategies,and the preliminary results showed a positive recovery trend in forest vegetation from the first year following the fire event,with a reduced charcoal predominance and an increasing proportion of green components.
基金financially supported by the National Key Research and Development Program of China(Grant No.2023YFB3710204)Guangxi Science and Technology Major Program(Grant No.AA23023028-1)+1 种基金Natural Science Foundation of Heilongjiang Province of China for Distinguished Young Scientists(Grant No.JQ2022E007)Xinjiang Production and Construction Corps Science and Technology Plan(Grant No.2023AA003).
文摘Accurate crown control is paramount for ensuring the quality of hot-rolled strip products.Given the multitude of influencing parameters and the intricate coupling and genetic relationships among them,the conventional crown control method is no longer sufficient to meet the precision requirements of schedule-free rolling.To address this limitation,an optimization framework for hot-rolled strip crown control was developed based on model-driven digital twin(MDDT).This framework enhances the strip crown control precision by facilitating collaborative operations among physical entities,virtual models,and functional application layers.In virtual modeling,a data-driven approach that integrates the extreme gradient boosting and the improved Harris hawk optimization algorithm was firstly proposed to fit the relationship between key process parameters and strip crown,and a global-local collaborative training strategy was proposed to enhance the model adaptability to diverse working conditions.Subsequently,the influence of crucial process factors on the virtual model was examined through model responses.Furthermore,a novel optimization mode for crown control based on MDDT was established by aligning and reconstructing both the physical and virtual models,thereby enhancing the crown control precision.Finally,data trials were conducted to validate the effectiveness of the proposed framework.The results indicated that the proposed method exhibited satisfactory performance and could be effectively utilized to improve the crown control precision.
基金support from the National Natural Science Foundation of China (Grant No.U21B2094 and Grant No.U2067212)。
文摘The separation of lithium isotopes (^(6)Li and ^(7)Li) is of great importance for the nuclear industry.The lithium amalgam method is the only lithium isotopes separation process in industry,and the extensive use of mercury has raised concerns about its potential environmental hazards,which have prompted the search for more efficient and environmentally friendly alternatives.Crown ethers can bind lithium ions highly selectively and separate lithium isotopes effectively.A chemical exchange-based lithium isotopes separation method using crown ether decorated materials could be a viable and cost-effective alternative to the lithium amalgam method.In this review,we provide a systematic summary of the recent advances in lithium isotopes separation using crown ethers decorated materials.
文摘The authors regret that the declaration of Acknowledgement as below is missing in the paper:AcknowledgementWe are grateful to the Department of Biology and Postgraduate Sciences-Biology of the Universidad del Valle,Cali-Colombia for their support of the project;to Wilmar Torres MSc.for his statistical advice;to the biologist Helen Burnham MSc.for the translation of the document;to Isabel Castro and all the members of the Ornithology and Animal Behaviour Laboratory-OYCA of Universidad del Valle for their invaluable support in the field.We sincerely thank the anonymous re-viewers for their invaluable feedback and contributions to our manuscript.
基金supported by the following research grant.The Creative Group Fund of National Natural Science Foundation of China(Grant no.22021005)the Fund of National Natural Science Foundation of China(Grant no.22075037)HEC for National Research Program for Universities(NRPU)Project no.14840.
文摘Anion exchange membrane(AEM)fuel cells require membranes with a balance of high conductivity and durability.In this work,a novel bi-crown-ether modified piperidine structure was designed and synthesized,which was then introduced into the side chain of poly(arylene piperidinium),making a unique bi-crown-ether modified bi-piperidinium side chain grafted polymer for AEM fabrication.The double crown ether units enhanced cation–water interactions and promoted microphase separation,thereby forming efficient hydroxide ion transport channels.The resulting membrane exhibited high water uptake,well-defined ion clusters,and a hydroxide conductivity of 123 mS cm^(-1) at 80℃ with an ion exchange capacity(IEC)of 1.56 mmol g^(-1).After alkaline treatment in 1 M NaOH at 80℃ for 960 h,the membrane retained~85%of its initial conductivity,demonstrating excellent chemical stability.In H2/O2 fuel cell tests at 60℃ ,the membrane achieved a peak power density of 558 mW cm-2 at 1040 mA cm-2.These findings highlight the potential of bi-crown-ether modified piperidinium side chain grafting as an effective strategy to enhance ion conduction properties of AEMs for fuel cell applications.
基金supported by the European Union and the Romanian Government through the Competitiveness Operational Programme 2014–2020, under the project“Increasing the economic competitiveness of the forestry sector and the quality of life through knowledge transfer,technology and CDI skills”(CRESFORLIFE),ID P 40 380/105506, subsidiary contract no. 17/2020partially by the FORCLIMSOC Nucleu Programme (Contract 12N/2023)+2 种基金project PN 23090101CresPerfInst project (Contract 34PFE/December 30, 2021)“Increasing the institutional capacity and performance of INCDS ‘Marin Drǎcea’in RDI activities-CresPer”LM was financially supported by the Research Council of Finland's flagship ecosystem for Forest-Human-Machine Interplay–Building Resilience, Redefining Value Networks and Enabling Meaningful Experiences (UNITE)(decision number 357909)
文摘In this study,we used an extensive sampling network established in central Romania to develop tree height and crown length models.Our analysis included more than 18,000 tree measurements from five different species.Instead of building univariate models for each response variable,we employed a multivariate approach using seemingly unrelated mixed-effects models.These models incorporated variables related to species mixture,tree and stand size,competition,and stand structure.With the inclusion of additional variables in the multivariate seemingly unrelated mixed-effects models,the accuracy of the height prediction models improved by over 10% for all species,whereas the improvement in the crown length models was considerably smaller.Our findings indicate that trees in mixed stands tend to have shorter heights but longer crowns than those in pure stands.We also observed that trees in homogeneous stand structures have shorter crown lengths than those in heterogeneous stands.By employing a multivariate mixed-effects modelling framework,we were able to perform cross-model random-effect predictions,leading to a significant increase in accuracy when both responses were used to calibrate the model.In contrast,the improvement in accuracy was marginal when only height was used for calibration.We demonstrate how multivariate mixed-effects models can be effectively used to develop multi-response allometric models that can be easily calibrated with a limited number of observations while simultaneously achieving better-aligned projections.
基金supported by the National Natural Science Foundation of China(Grant No.62174079)Guangdong Provincial Quantum Science Strategic Initiative(Grant No.GDZX2404006)Science,Technology and Innovation Commission of Shenzhen Municipality(Grant No.JCYJ20220530113015035)。
文摘CdSe nanoplatelets(NPLs)are promising candidates for on-chip light sources,yet their performance is hindered by surface defects and inefficient optical gain.Herein,we demonstrate that CdSeS crown passivation significantly enhances the photophysical property of CdSe NPLs.Laser spectroscopy techniques reveal suppressed electronic and hole trapping at lateral surfaces,leading to a 4.2-fold increase in photoluminescence quantum yield and a shortened emission lifetime from13.5 to 4.8 ns.In addition,amplified spontaneous emission is achieved under nanosecond pulse pumping,with thresholds of0.75 to 0.16 mJ/cm^(2)for CdSe and CdSe/CdSeS NPLs,respectively.By integrating CdSe/CdSeS NPLs with high-refractiveindex SiO2scatters,coherent random lasing is realized at a threshold of 0.21 mJ/cm^(2).These findings highlight the critical role of lateral surface passivation in optimizing optical gain and pave the way for low-cost,multifunctional nanophotonic devices.
基金financially supported by the National Natural Science Foundation of China (52174336)the Natural Science Foundation of Shandong Province (ZR2021MB051)。
文摘In recent years,with the rapid developme nt of the econo my and society,pollution of valuable metal ions in wastewater has become a major challenge to environmental sustainability.In order to solve the pollution caused by metal ions,researchers have conducted continuous re searches and explored various re mediation methods.Crown ether has attracted great attention because of its ionic radius and cavity size matching well with metal ions,which makes it have the ability to selectively complex metal ions.This unique property enables the directed removal and recovery of metal ions and makes crown ethers increasingly popular in extraction and separation processes.In this paper,the research progress of crown ethers in the extraction and separation of valuable metal ions was reviewed,with emphasis on the principles,extraction systems and the key factors affecting the extraction process.This study can provide some technical support for the application of separation and extraction of valuable metal ions by crown ether.
基金Supported by Undergraduate Research Abroad Program,Ohio State University,USA(11731-011000)~~
文摘Eucalyptus forests are grown in many parts of the world for their commercial value and use in construction projects. Density management becomes im- portant as a means to attain the management goals in these forests. Changes in canopy and tree crown structure were quantified for Eucalyptus urophylla x E. grandis forests at different ages to determine when canopy closure occurs and the onset of competition begins. Site index was developed for these forests to determine whether site quality affects the canopy structure. Site index had little effect in the forests sampled, with the forest canopy on the better sites becoming slightly more elongated. Based upon crown projection ratio and crown diameter： dbh （diameter at breast height） ratio, it appears that crown closure occurs by age 4 years in these forests. The age at which this occurs was also checked and verified with the evaluation of relative spacing, RS （the ratio of the mean distance between trees to the average dominant height of the stand）. The RS value displayed a rapid decline until age 4 years, and then became relatively flat through age 21 years. The rapid height growth during the first 3 years with no change in density accounted for this rapid decrease. By age 4 years, reductions in the number of trees due to mortality began to have more of an influence on this value, resulting in a more gradual de- cline. The implications for management are discussed.
基金Supported by the National Nonprofit Institute Research Grant of CATAS-TCGRI(163003201503316300320140322016+1 种基金pzsfyl-201613)the Ministry of Agriculture Tropical Crop Germplasm Resources Protection(16RZZY-101)~~
文摘Objective] The study was aimed to improve the yield and quality of cashew. [Method] Through the comparative analysis, the survival rate, new germi-nation and yield characteristics of the cutting stems with different heights by stem grafting and bark grafting. [Result] The best cutting stem height of cashew should be in 100-150 cm, when the number of new germinated shoots was 85.5-87.7. Stem grafting could significantly improve the survival rate of the shooting branch （92.7%）, growth condition of which was better than that of bark grafting, and it also had no clip cortex. The yield of stem grafting was significantly higher than that of bark grafting, and it could reach up to 18.1 kg/plant in 4 years. The branches from stem grafting had significantly better ability in resisting the wind damage than those from bark grafting. [Conclusion] The study provided references for the crown grafting of cashew planting in China.
文摘The program of the plate crown optimal prediction applied in the plate mill of Wuhan Iron and Steel(Group) Co. Ltd. is described. Optimal prediction is programmed in ALPHA 4000. The original profile, wear, expansion and deformation of work rolls are introduced into the program. The plate crown is controlled by the original profile of work rolls and the draft whose objective is the optimal plate crown. The run schedule is also optimized through the optimal prediction of the plate crown.
文摘A flexible and adaptable design method for the tooth crown is presented based on the direct manipulation of free-form deformation （FFD）. The correct shape of the tooth crown can be obtained by adding, modifying, and deleting constraint points or load points based on stretching and compressing operation. Finally, an example is given to illustrate the method to be efficient.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFD2201203)the financial support of the National Natural Science Foundation of China(32001311)。
文摘Tree plantations are globally significant,and therefore,growth-related challenges cannot be ignored.Canopy structure and light environment influence the growth of plantations,but the precise relationship remains unclear.We selected seven-year-old poplar plantations of varying cultivars planted various densities and measured their growth,canopy structure,and light environment.The findings indicate that poplar plantations of different cultivars and at different planting densities showed variations in leaf area index(LAI),average leaf angle(ALA),crown length(CL),length ratio(CLR),roundness(CR)and surface area(CSA),which directly or indirectly affect growth,resulting in disparities in their growing conditions.Crown roundness directly impacted growth,while LAI,CLR and ALA influenced growth indirectly by affecting intercellular carbon dioxide concentration.LAI and CLR had a positive effect;ALA had a negative one.Crown length and surface area directly and indirectly influenced growth by affecting photo synthetically active radiation and net photo synthetic rate,with direct impacts being more pronounced.This research has clarified the regulatory role of canopy structure in plantations growth,providing valuable insights for developing more effective management strategies.
基金supported by the Xingdian Talent Support Program of Yunnan Province(E5YNR03B01)the Xishuangbanna State Rainforest Talent Support Program(E4BN041B01)the CAS President’s International Fellowship Initiative(2020FYB0003)。
文摘Allometric equations are fundamental tools in ecological research and forestry management,widely used for estimating above-ground biomass and production,serving as the core foundations of dynamic vegetation models.Using global datasets from Tallo(a tree allometry and crown architecture database encompassing thousands of species)and TRY(a plant traits database),we fit B ayesian hierarchical models with three alternative functional forms(powerlaw,generalized Michaelis-Menten(gMM),and Weibull)to characterize how diameter at breast height(DBH),tree height(H),and crown radius(CR)scale with and without wood density as a species-level predictor.Our analysis revealed that the saturating Weibull function best captured the relationship between tree height and DBH in both functional groups,whereas the CR-DBH relationship was best predicted by a power-law function in angiosperms and by the gMM function in gymnosperms.Although including wood density did not significantly improve predictive performance,it revealed important ecological trade-offs:lighter-wood angiosperms achieve taller mature heights more rapidly,and denser wood promotes wider crown expansion across clades.We also found that accurately estimating DBH required considering both height and crown size,highlighting how these variables together distinguish trees of similar height but differing trunk diameters.Our results emphasize the importance of applying saturating functions for large trees to improve forest biomass estimates and show that wood density,though not always predictive at broad scales,helps illuminate the biomechanical and ecological constraints underlying diverse tree architectures.These findings offer practical pathways for integrating height-and crown-based metrics into existing carbon monitoring programs worldwide.
