Objective:To assess prenatal Bisphenol A(BPA)exposure levels and explore their preliminary associations with maternal and fetal characteristics in a population from Northeastern Yunnan.Methods:A cross-sectional analys...Objective:To assess prenatal Bisphenol A(BPA)exposure levels and explore their preliminary associations with maternal and fetal characteristics in a population from Northeastern Yunnan.Methods:A cross-sectional analysis was performed using data and urine samples from 70 pregnant women in their third trimester recruited at Qujing Central Hospital.Urinary BPA was measured by HPLC-MS/MS.Participants were stratified into high and low BPA exposure groups based on the median concentration.Results:BPA was detected in all samples(100%)with a median concentration of 2.41μg/L(IQR:0.68-4.96).The high BPA exposure group(≥2.41μg/L)had a significantly higher proportion of gestational diabetes mellitus(GDM)(42.9%vs.17.1%,p=0.021)and a lower median fetal birth weight(3250 g vs.3450 g,p=0.048)compared to the low exposure group.Conclusion:This pilot study reveals ubiquitous BPA exposure in pregnant women from Northeastern Yunnan.The observed preliminary associations with GDM and reduced fetal birth weight warrant further investigation in larger,longitudinal studies.展开更多
Ultra-high-strength aluminumalloy profile is an ideal choice for aerospace structuralmaterials due to its excellent specific strength and corrosion resistance.However,issues such as uneven metal flow,stress concentrat...Ultra-high-strength aluminumalloy profile is an ideal choice for aerospace structuralmaterials due to its excellent specific strength and corrosion resistance.However,issues such as uneven metal flow,stress concentration,and forming defects are prone to occur during their extrusion.This study focuses on an Al-Zn-Mg-Cu ultra-high-strength aluminum alloy profile with a double-U,multi-cavity thin-walled structure.Firstly,hot compression experiments were conducted at temperatures of 350○C,400○C,and 450○C,with strain rates of 0.01 and 1.0 s^(−1),to investigate the plastic deformation behavior of the material.Subsequently,a 3D coupled thermo-mechanical extrusion simulation model was established using Deform-3D to systematically analyze the influence of die structure and process parameters on metal flow velocity,effective stress/strain,and temperature distribution.The simulation revealed significant velocity differences,stress concentration,and uneven temperature distribution.Key parameters,including mesh density,extrusion ratio,die fillet,and bearing length,were optimized through full-factorial experiments.This optimization,combined with a stepped flow-guiding die design,effectively improved the metal flow pattern during extrusion.Trial production based on both the initial and optimized parameters were carried out.A comparative analysis demonstrates that the optimized scheme results in a final profile whose cross-section matches the target design closely,with complete filling of complex features and no obvious forming defects.This research provides a valuable reference for the extrusion process optimization and die design of complex-section profiles made from ultra-high-strength aluminum alloys.展开更多
Objective This study aimed to determine the temporal trends in sleep duration among Chinese adults.Methods In this series of repeated nationally representative cross-sectional surveys(China Chronic Disease and Risk Fa...Objective This study aimed to determine the temporal trends in sleep duration among Chinese adults.Methods In this series of repeated nationally representative cross-sectional surveys(China Chronic Disease and Risk Factors Surveillance)conducted between 2010 and 2018,a total of 645,420 adult participants(97,741 in 2010;175,749 in 2013;187,777 in 2015;and 184,153 in 2018)were included in the trend analysis.Linear and logistic regression models were utilized to assess trends in sleep duration.Results In 2018,the estimated overall mean sleep duration among the Chinese adult population was7.58(SD,1.45)hours per day,with no significant trend from 2010.A significant increase in short sleep duration(≤6 hours)was observed in the total population,from 15.3%(95%CI:14.1%–16.5%)in 2010 to18.5%(95%CI:17.7%–19.3%)in 2018(P<0.001).Similarly,the trend in long sleep duration(>9 hours)was also significant,increasing in weighted prevalence from 7.2%(95%CI:6.3%–8.1%)in 2010 to 9.0%(95%CI:8.2%–9.9%)in 2018(P<0.001).Conclusion The prevalence of both short and long sleep durations significantly increased among Chinese adults from 2010 to 2018,highlighting the urgency of health initiatives to promote optimal sleep duration in China.展开更多
We investigated the impact of convexity and isoperimetric deficits on the accuracy of sectional area estimates of tree stems using traditional methods(caliper,tape,formulas based on stem diameter and circumference).In...We investigated the impact of convexity and isoperimetric deficits on the accuracy of sectional area estimates of tree stems using traditional methods(caliper,tape,formulas based on stem diameter and circumference).In two complementary experiments,the use of photographs to estimate cross-sectional areas was first validated,then the use of a caliper and diameter tape was computer-simulated.The results indicated that the photographic method offers high precision,with mean relative errors below 0.1%,minimal deviation,and no significant bias,and the traditional methods led to substantial and systematic errors,with deviations from circularity and convexity significantly increasing the errors in area estimation.展开更多
This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the pred...This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the prediction of the movement track and intensity of Typhoon Kompasu in 2021 is examined.Additionally,the possible reasons for their effects on tropical cyclone(TC)intensity prediction are analyzed.Statistical results show that both parameterization schemes improve the predictions of Typhoon Kompasu’s track and intensity.The influence on track prediction becomes evident after 60 h of model integration,while the significant positive impact on intensity prediction is observed after 66 h.Further analysis reveals that these two schemes affect the timing and magnitude of extreme TC intensity values by influencing the evolution of the TC’s warm-core structure.展开更多
Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.W...Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.展开更多
Objective The relationship between non-high-density lipoprotein(NHDL)cholesterol to high-density lipoprotein cholesterol(HDL-C)ratio(NHHR)and stoke remains unknown.This study aimed to evaluate the association between ...Objective The relationship between non-high-density lipoprotein(NHDL)cholesterol to high-density lipoprotein cholesterol(HDL-C)ratio(NHHR)and stoke remains unknown.This study aimed to evaluate the association between the adult NHHR and stroke occurrence in the United States of America(USA).Methods To clarify the relationship between the NHHR and stroke risk,this study used a multivariable logistic regression model and a restricted cubic spline(RCS)model to investigate the association between the NHHR and stroke,and data from the National Health and Nutrition Examination Survey(NHANES)from 2005 to 2018.Subgroup and sensitivity analyses were conducted to test the robustness of the results.Results This study included 29,928 adult participants,of which 1,165 participants had a history of stroke.Logistic regression analysis of variables demonstrated a positive association between NHHR and stroke(OR 1.24,95%CI:1.03-1.50,P=0.026).Compared with the lowest reference group of NHHR,participants in the second,third,and fourth quartile had a significantly increased risk of stroke after full adjustments(OR:1.35,95%CI:1.08-1.69)(OR:1.83,95%CI:1.42-2.36)(OR:2.04,95%CI:1.50-2.79).In the total population,a nonlinear dose-response relationship was observed between the NHHR and stroke risk(P non-linearity=0.002).This association remained significant in several subgroup analyses.Further investigation of the NHHR may enhance our understanding of stroke prevention and treatment.Conclusion Our findings suggest a positive correlation between the NHHR and an increased prevalence of stroke,potentially serving as a novel predictive factor for stroke.Timely intervention and management of the NHHR may effectively mitigate stroke occurrence.Prospective studies are required to validate this association and further explore the underlying biological mechanisms.展开更多
The umbilical,a key component in offshore energy extraction,plays a vital role in ensuring the stable operation of the entire production system.The extensive variety of cross-sectional components creates highly comple...The umbilical,a key component in offshore energy extraction,plays a vital role in ensuring the stable operation of the entire production system.The extensive variety of cross-sectional components creates highly complex layout combinations.Furthermore,due to constraints in component quantity and geometry within the cross-sectional layout,filler bodies must be incorporated to maintain cross-section performance.Conventional design approaches based on manual experience suffer from inefficiency,high variability,and difficulties in quantification.This paper presents a multi-level automatic filling optimization design method for umbilical cross-sectional layouts to address these limitations.Initially,the research establishes a multi-objective optimization model that considers compactness,balance,and wear resistance of the cross-section,employing an enhanced genetic algorithm to achieve a near-optimal layout.Subsequently,the study implements an image processing-based vacancy detection technique to accurately identify cross-sectional gaps.To manage the variability and diversity of these vacant regions,the research introduces a multi-level filling method that strategically selects and places filler bodies of varying dimensions,overcoming the constraints of uniform-size fillers.Additionally,the method incorporates a hierarchical strategy that subdivides the complex cross-section into multiple layers,enabling layer-by-layer optimization and filling.This approach reduces manufac-turing equipment requirements while ensuring practical production process feasibility.The methodology is validated through a specific umbilical case study.The results demonstrate improvements in compactness,balance,and wear resistance compared with the initial cross-section,offering novel insights and valuable references for filler design in umbilical cross-sections.展开更多
OBJECTIVE:To investigate the difference in gut microbiota between population with damp-heat constitution(DHC)and balanced constitution(BC).METHODS:A multi-centered cross-sectional casecontrol study was conducted,which...OBJECTIVE:To investigate the difference in gut microbiota between population with damp-heat constitution(DHC)and balanced constitution(BC).METHODS:A multi-centered cross-sectional casecontrol study was conducted,which included 249 participants with damp-heat constitution or balanced constitution.Baseline information of participants was collected,and stool samples were collected for gut microbiota analysis.Principal coordinate analysis,linear discriminant analysis effect size analysis,receiver operating characteristic,random forest model,and phylogenetic investigation of communities by reconstruction of unobserved states methods were used to reveal the relationship between gut microbiota and the damp-heat constitution.RESULTS:Compared to those in the BC group,the richness and diversity of the microbiota,specifically those of several short-chain fatty acid producing genera such as Barnesiella,Coprobacter,and Butyricimonas,were significantly decreased in the DHC group.Regarding biological functions,flavonoid biosynthesis,propanoate metabolism,and nucleotide sugar metabolism were suppressed,while arachidonic acid metabolism and glutathione metabolism were enriched in the DHC group.Finally,a classifier based on the microbiota was constructed to discriminate between the DHC and BC populations.CONCLUSION:The gut microbiota of the DHC population exhibits significantly reduced diversity and is closely related to inflammation,metabolic disorders,and liver steatosis,which is consistent with clinical observations,thus serving as a potential diagnostic tool for traditional Chinese medicine constitution discrimination.展开更多
Objective:Postpartum nutrition plays a critical role in maternal recovery and long-term health.However,the nutritional status of working mothers in the postpartum period remains understudied.This study aimed to assess...Objective:Postpartum nutrition plays a critical role in maternal recovery and long-term health.However,the nutritional status of working mothers in the postpartum period remains understudied.This study aimed to assess the dietary quality of postpartum women in urban Beijing,identify occupational-related factors influencing their diet,and explore potential interventions to improve maternal nutrition during the postpartum period.Methods:In this cross-sectional analysis,554 women one year after delivery were recruited from ten community health centers.Sociodemographic,occupational and postpartum care variables were collected via questionnaire.Dietary intake over the preceding year was assessed using a food frequency questionnaire.The modified dietary balance index for postpartum women were used for dietary quality assessment.Results:The study revealed severe dietary imbalances among postpartum women,characterized by excessive consumption of cereals,eggs,and meats,while their intake of vegetables,fruits,and dairy products was inadequate.According to dietary balance index for postpartum women,66.25%of mothers showed varying degrees of excessive intake.45.31%of mothers experienced varying levels of insufficient intake,with only 19.86%of participants having a relatively balanced diet.Occupational differences were observed,with women in the commercial employment group showing higher levels of excessive food intake.The analysis of influencing factors showed that family monthly income,maternity leave,and postpartum care significantly affected the dietary quality.Conclusions:Postpartum women in Beijing experience widespread dietary imbalances,with both excesses and deficiencies.Occupational context and related factors significantly shape diet quality.These findings highlight the need for targeted nutritional interventions tailored to the specific challenges of different occupational groups.展开更多
Existing traditional ocean vertical-mixing schemes are empirically developed without a thorough understanding of the physical processes involved,resulting in a discrepancy between the parameterization and forecast res...Existing traditional ocean vertical-mixing schemes are empirically developed without a thorough understanding of the physical processes involved,resulting in a discrepancy between the parameterization and forecast results.The uncertainty in ocean-mixing parameterization is primarily responsible for the bias in ocean models.Benefiting from deep-learning technology,we design the Adaptive Fully Connected Module with an Inception module as the baseline to minimize bias.It adaptively extracts the best features through fully connected layers with different widths,and better learns the nonlinear relationship between input variables and parameterization fields.Moreover,to obtain more accurate results,we impose KPP(K-Profile Parameterization)and PP(Pacanowski–Philander)schemes as physical constraints to make the network parameterization process follow the basic physical laws more closely.Since model data are calculated with human experience,lacking some unknown physical processes,which may differ from the actual data,we use a decade-long time record of hydrological and turbulence observations in the tropical Pacific Ocean as training data.Combining physical constraints and a nonlinear activation function,our method catches its nonlinear change and better adapts to the oceanmixing parameterization process.The use of physical constraints can improve the final results.展开更多
To investigate the effects of the maximum principal stress direction(θ)and cross-section shape on the failure characteristics of sandstone,true-triaxial compression experiments were conducted using cubic samples with...To investigate the effects of the maximum principal stress direction(θ)and cross-section shape on the failure characteristics of sandstone,true-triaxial compression experiments were conducted using cubic samples with rectangular,circular,and D-shaped holes.Asθincreases from 0°to 60°in the rectangular hole,the left failure location shifts from the left corner to the left sidewall,the left corner,and then the floor,while the right failure location shifts from the right corner to the right sidewall,right roof corner,and then the roof.Furthermore,the initial failure vertical stress first decreases and then increases.In comparison,the failure severity in the rectangular hole decreases for variousθvalues as 30°>45°>60°>0°.With increasingθ,the fractal dimension(D)of rock slices first increases and then decreases.For the rectangular and D-shaped holes,whenθ=0°,30°,and 90°,D for the rectangular hole is less than that of the D-shaped hole.Whenθ=45°and 60°,D for the rectangular hole is greater than that of the D-shaped hole.Theoretical analysis indicates that the stress concentration at the rectangular and D-shaped corners is greater than the other areas.The failure location rotates with the rotation ofθ,and the failure occurs on the side with a high concentration of compressive stress,while the side with the tensile and compressive stresses remains relatively stable.Therefore,the fundamental reason for the rotation of failure location is the rotation of stress concentration,and the external influencing factor is the rotation ofθ.展开更多
Prediction models were proposed to estimate the reduced Townsend ionization coefficient and ionization cross-section.A shape function of the reduced Townsend ionization coefficient curves was derived from the ionizati...Prediction models were proposed to estimate the reduced Townsend ionization coefficient and ionization cross-section.A shape function of the reduced Townsend ionization coefficient curves was derived from the ionization collision probability model.The function had three parameters:the first ionization potential energy,A_(α),and B_(α).A_(α)and B_(α)were related to the molecule symmetry and size.The polarization of molecules could characterize the molecule symmetry.The multi-layer molecular cross-section(MMCS)was proposed to describe the contributions of electrons and molecule radius on different molecule surfaces to collisions.A prediction model of the ionization cross-section was also proposed based on Aα.The molecule parameters were calculated by the Becke3–Lee–Yang–Parr(B3LYP)method and the 6–311G**basis set.We used available data of 30 and 23 gases,respectively,to build the prediction models of reduced Townsend ionization coefficients and ionization cross-sections.The relationships between the molecular parameters Aαand Bαand the ionization cross-section were built up via nonlinear fittings.The determination coefficients R^(2)of Aα,Bα,and the ionization cross-section were 0.877,0.887,and 0.838,respectively.The results showed that the accuracy of models was positively correlated with the molecule symmetry and reduced electric field.This was mainly related to the accuracy of the MMCS model in predicting Aα.The MMCS model needed to be improved to describe the collision direction selectivity caused by the molecule asymmetry.Under a high reduced electric field,that error of Aαhad less influence on the prediction results.However,the prediction results for single atoms with high symmetry were poor.This may be due to the absolute error of the model close to single atoms’reduced Townsend ionization coefficients.The models could provide the basis for gas insulation prediction and discharge calculations,especially for symmetric molecules under a high electric field.展开更多
The elliptical cross-section spiral equal-channel extrusion （ECSEE） process is simulated by using Deform-3D finite element software. The ratio m of major-axis to minor-axis length for ellipse-cross-section, the tors...The elliptical cross-section spiral equal-channel extrusion （ECSEE） process is simulated by using Deform-3D finite element software. The ratio m of major-axis to minor-axis length for ellipse-cross-section, the torsion angle u, the round-ellipse cross-section transitional channel L1, the elliptical rotation cross-section transitional channel L2 and the ellipse-round cross-section transitional channel L3 are destined for the extrusion process parameters. The average effective strain eave on cross-section of blank, the deformation uniformity coefficient a and the value of maximum damage dmax are chosen to be the optimize indexes, and the virtual orthogonal experiment of L16 （45） is designed. The correlation degree of the process factors affecting eave, a and dmax is analyzed by the numerical simulation results using the weights and grey association model. The process parameters are optimized by introducing the grey situation decision theory and the ECSEE optimal combination of process parameters is obtained： u of 120 , m of 1.55, L1 of 7 mm, L2 of 10 mm, and L3 of 10 mm. Simulation and experimental results show that the material can be refined with the optimized structural parameters of die. Therefore, the optimization results are satisfactory.展开更多
Background:The bibliometrics of acupuncture are growing rapidly.However,the absence of reporting guidelines may lead to significant duplication and waste,thereby undermining the research’s value.To address this,a kno...Background:The bibliometrics of acupuncture are growing rapidly.However,the absence of reporting guidelines may lead to significant duplication and waste,thereby undermining the research’s value.To address this,a knowledge mapping was generated based on published studies to investigate the characteristics of bibliometric studies on acupuncture and the extent of duplicate publications,with the overarching goal of providing a comprehensive overview of the knowledge structure in this field.Methods:This cross-sectional study used three databases(PubMed,Web of Science,and Scopus)to identify relevant studies up to May 1,2024.In addition,the reference lists were retrieved as a supplement.To track research trends,we employed Microsoft Excel and R software to extract,code,and analyze information.Study selection,data extraction,and validation were performed independently by at least two reviewers.The reporting quality of included studies was assessed using the Preliminary guideline for reporting bibliometric reviews of the biomedical literature(BIBLIO).Results:Among the 6,221 bibliometric reviews examined,113 relevant publications were identified,80 focusing on various diseases/conditions.The annual number of publications has gradually increased,with the output in the past four years being 3.52 times higher than that before 2020.China(106)and Chengdu University of Traditional Chinese Medicine(16)have the highest number of publications.The most prolific author is Fan-Rong Liang,with six articles.The first bibliometric study,by Hai-Yan Li,was published in 2010.Journal of Pain Research,with 36 articles,holds the most publications.The top three diseases:diseases of the nervous system;symptoms,signs,or clinical findings not elsewhere classified;and mental,behavioral,or neurodevelopmental disorders.There may be potential duplication in research on 13 diseases/conditions,notably stroke,migraine,pain/analgesia,cancer pain,shoulder pain,facial paralysis/bell’s palsy,chronic pain,and cognitive impairment.In BIBLIO,the most frequently missing items are issues/topics(item 2),quality assessment(item 11),and descriptive findings(item 13).Conclusion:This study demonstrates that acupuncture bibliometrics is actively utilized to identify dominant diseases/conditions,aiding scholars in understand the knowledge structure and main topics.Although the number of related studies is increasing,with an average of 25 studies annually,overlap in some areas highlights the need for adherence to reporting guidelines and careful topic selection to ensure truly valuable insights and knowledge contributions.The adherence to BIBLIO’s 20 proposed items across analyzed articles,highlighting important in reporting practices.展开更多
A train body's cross-sectional shape has a significant impact on aerodynamic drag and operational safety in high-speed trains(HSTs).This study extracts five design variables from a real-world HST body:height,width...A train body's cross-sectional shape has a significant impact on aerodynamic drag and operational safety in high-speed trains(HSTs).This study extracts five design variables from a real-world HST body:height,width,side arc radius,arc radius at the connection between the side and the roof,and arc radius at the connection between the side and the train's bottom.The cross-validated Kriging surrogate model and the genetic algorithm are used to perform two types of aerodynamic optimization,with the cross-sectional area as a constraint.Cross-sectional shapes are optimized in both windless and windy conditions.Numerical results indicate that in a windless environment,the aerodynamic drag coefficient of the whole train is reduced by 2.4%;in a windy condition,the aerodynamic drag coefficient of the entire vehicle is reduced by 2.4%,and the aerodynamic lateral force of the leading car is reduced by 37.8%.These suggest that a flat and wide shape helps to reduce not only overall aerodynamic drag in a windless environment but also aerodynamic load in a windy environment,which can be accomplished by reducing the area of the side wall and top region,lowering the train body's height,increasing its width,and lowering the radius of the side and top arcs.展开更多
Objectives:This study aimed to classify young breast cancer patients into distinct ambivalence over emotional expression and to explore the factors influencingthe level of ambivalence over emotional expression.Methods...Objectives:This study aimed to classify young breast cancer patients into distinct ambivalence over emotional expression and to explore the factors influencingthe level of ambivalence over emotional expression.Methods:A total of 217 young breast cancer patients were enrolled from a tertiary Grade A oncology hospital in Tianjin,China,using the convenience sampling method.All participants completed the general questionnaire,Ambivalence over Emotion Expression Questionnaire(AEQ),and Family Adapt-Ability and Cohesion Evaluation Scales-Chinese Version(FACES-CV).We employed exploratory latent profileanalysis for ambivalence over emotional expression profilingand logistic regression analysis to identify the influentialfactors Results:The results of the latent profileanalysis supported the models of four latent profiles,which were definedas“low conflict-lowexpression reflection”(19.2%),“high conflict-high inhibition expression”(43.9%),“moderate conflict-highregret expression”(18.1%),and“moderate conflict-desire understand”(18.8%).Logistic regression revealed that family cohesion,marital status,residence,per capita monthly income,and cancer stage were the influencingfactors of ambivalence over emotional expression in young breast cancer patients(P<0.05)Conclusions:Levels of ambivalence over emotional expression ameast cancer patients with breast cancer were highly heterogeneous.Medical staff should provide psychological counseling and health education tailored to the unique characteristics of emotional expression ambivalence in different patient groups to promote healthy emotional expression among patients.展开更多
The coconut structure exhibits inherent impact resistance,with the macroscopically ordered distribution of variable crosssection fibers in its husk playing a crucial role in stress wave propagation and scaling.Inspire...The coconut structure exhibits inherent impact resistance,with the macroscopically ordered distribution of variable crosssection fibers in its husk playing a crucial role in stress wave propagation and scaling.Inspired by the natural structure and fibers,this study proposes a stress wave propagation model for a variable cross-section bar considering viscous effects.A theoretical model for stress wave propagation in a fusiform-shaped bar with variable cross-section is established,elucidating the stress wave scaling effect observed in coconut fibers.Additionally,a quasi-one-dimensional method for analyzing and measuring stress wave propagation is introduced,and an experimental setup is assembled.Experimental validation of the stress wave scaling effect confirms the theory’s accuracy for stress wave scaling in variable cross-section bars.This research provides theoretical guidance and measurement methods for the design of space landers,automobile anti-collision beams,stress wave collectors,and scalers,as well as for impact testing of macro and micro materials and the design of sustainable plant-based materials for impact protection.展开更多
association with academic and clinical performance.This study aimed to determine the EI level of hospital-based nursing students and examine differences between full-time and part-time students.Methods:We conducted a ...association with academic and clinical performance.This study aimed to determine the EI level of hospital-based nursing students and examine differences between full-time and part-time students.Methods:We conducted a cross-sectional study in a hospital-based nursing school.EI level was measured using the Schutte Self-report Emotional Intelligence Scale(SSEIS).Results:We recruited 287 participants(mean age:21.9 years).Their mean SSEIS score was 119.6(95%CI=118.57-120.65).The mean SSEIS scores of 172 full-time and 115 part-time nurses were 120.7(95%CI=119.3-122.0)and 118.1(95%CI=116.5-119.6),respectively.There was no significant difference between the groups.Conclusion:The EI difference between full-time and part-time nursing students was statistically insignificant.The need for further EI development among both full-time and part-time students must be addressed.展开更多
Objective:This study aimed to examine the association between parent-child relationships and physically aggressive behavior among adolescents.Methods:This is a cross-sectional study that uses secondary data from the 2...Objective:This study aimed to examine the association between parent-child relationships and physically aggressive behavior among adolescents.Methods:This is a cross-sectional study that uses secondary data from the 2015 Indonesia Global School-Based Health Survey(IGSHS).Health surveys were conducted in 75 schools representing three regions(Sumatra,Java-Bali;Outer Sumatra;and Java-Bali)in 26 provinces and 68 districts/cities in Indonesia(N=10,139 students).Students who participated were aged 12-19 years,were enrolled in public schools in the junior and high school levels.Results:It has been seen that for most middle-aged adolescents(58.7%),their parents(25%-29%)pay less attention to academic assignments(homework),problems,and use of free time.The most significant factors that influence adolescents to commit violence are smoking and consuming alcohol.Adolescents who smoke are twice as likely to commit physical violence compared with adolescents who do not smoke(OR=2.005;95%CI=1.7062-2.396).Meanwhile,adolescents who consume alcohol are 1.8 times more likely to commit physical violence compared with adolescents who do not consume alcohol(OR=1.807;95%CI=1.421-2.298).Conclusions:Through educational activities and consultations,this study’s findings are valuable for establishing parenting programs among those concerned about their children’s aggressive behavior.Meanwhile,counseling programs can be started in schools by conducting self-detection of negative adolescent behavior,such as screening for smoking,alcohol consumption,sleep issues,and attempted suicide.展开更多
文摘Objective:To assess prenatal Bisphenol A(BPA)exposure levels and explore their preliminary associations with maternal and fetal characteristics in a population from Northeastern Yunnan.Methods:A cross-sectional analysis was performed using data and urine samples from 70 pregnant women in their third trimester recruited at Qujing Central Hospital.Urinary BPA was measured by HPLC-MS/MS.Participants were stratified into high and low BPA exposure groups based on the median concentration.Results:BPA was detected in all samples(100%)with a median concentration of 2.41μg/L(IQR:0.68-4.96).The high BPA exposure group(≥2.41μg/L)had a significantly higher proportion of gestational diabetes mellitus(GDM)(42.9%vs.17.1%,p=0.021)and a lower median fetal birth weight(3250 g vs.3450 g,p=0.048)compared to the low exposure group.Conclusion:This pilot study reveals ubiquitous BPA exposure in pregnant women from Northeastern Yunnan.The observed preliminary associations with GDM and reduced fetal birth weight warrant further investigation in larger,longitudinal studies.
基金supported by the National Key Research and Development Program of China(Grant No.2023YFB3710805).
文摘Ultra-high-strength aluminumalloy profile is an ideal choice for aerospace structuralmaterials due to its excellent specific strength and corrosion resistance.However,issues such as uneven metal flow,stress concentration,and forming defects are prone to occur during their extrusion.This study focuses on an Al-Zn-Mg-Cu ultra-high-strength aluminum alloy profile with a double-U,multi-cavity thin-walled structure.Firstly,hot compression experiments were conducted at temperatures of 350○C,400○C,and 450○C,with strain rates of 0.01 and 1.0 s^(−1),to investigate the plastic deformation behavior of the material.Subsequently,a 3D coupled thermo-mechanical extrusion simulation model was established using Deform-3D to systematically analyze the influence of die structure and process parameters on metal flow velocity,effective stress/strain,and temperature distribution.The simulation revealed significant velocity differences,stress concentration,and uneven temperature distribution.Key parameters,including mesh density,extrusion ratio,die fillet,and bearing length,were optimized through full-factorial experiments.This optimization,combined with a stepped flow-guiding die design,effectively improved the metal flow pattern during extrusion.Trial production based on both the initial and optimized parameters were carried out.A comparative analysis demonstrates that the optimized scheme results in a final profile whose cross-section matches the target design closely,with complete filling of complex features and no obvious forming defects.This research provides a valuable reference for the extrusion process optimization and die design of complex-section profiles made from ultra-high-strength aluminum alloys.
基金supported by the National Natural Science Foundation of China(82341245,82371491)the Chinese Central Government(Key Project of Public Health Program)the National Key Research and Development Program of China(2018YFC1311706,2018YFC1311702)。
文摘Objective This study aimed to determine the temporal trends in sleep duration among Chinese adults.Methods In this series of repeated nationally representative cross-sectional surveys(China Chronic Disease and Risk Factors Surveillance)conducted between 2010 and 2018,a total of 645,420 adult participants(97,741 in 2010;175,749 in 2013;187,777 in 2015;and 184,153 in 2018)were included in the trend analysis.Linear and logistic regression models were utilized to assess trends in sleep duration.Results In 2018,the estimated overall mean sleep duration among the Chinese adult population was7.58(SD,1.45)hours per day,with no significant trend from 2010.A significant increase in short sleep duration(≤6 hours)was observed in the total population,from 15.3%(95%CI:14.1%–16.5%)in 2010 to18.5%(95%CI:17.7%–19.3%)in 2018(P<0.001).Similarly,the trend in long sleep duration(>9 hours)was also significant,increasing in weighted prevalence from 7.2%(95%CI:6.3%–8.1%)in 2010 to 9.0%(95%CI:8.2%–9.9%)in 2018(P<0.001).Conclusion The prevalence of both short and long sleep durations significantly increased among Chinese adults from 2010 to 2018,highlighting the urgency of health initiatives to promote optimal sleep duration in China.
文摘We investigated the impact of convexity and isoperimetric deficits on the accuracy of sectional area estimates of tree stems using traditional methods(caliper,tape,formulas based on stem diameter and circumference).In two complementary experiments,the use of photographs to estimate cross-sectional areas was first validated,then the use of a caliper and diameter tape was computer-simulated.The results indicated that the photographic method offers high precision,with mean relative errors below 0.1%,minimal deviation,and no significant bias,and the traditional methods led to substantial and systematic errors,with deviations from circularity and convexity significantly increasing the errors in area estimation.
基金supported by the National Key R&D Program of China[grant number 2023YFC3008004]。
文摘This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the prediction of the movement track and intensity of Typhoon Kompasu in 2021 is examined.Additionally,the possible reasons for their effects on tropical cyclone(TC)intensity prediction are analyzed.Statistical results show that both parameterization schemes improve the predictions of Typhoon Kompasu’s track and intensity.The influence on track prediction becomes evident after 60 h of model integration,while the significant positive impact on intensity prediction is observed after 66 h.Further analysis reveals that these two schemes affect the timing and magnitude of extreme TC intensity values by influencing the evolution of the TC’s warm-core structure.
基金funded by Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R442)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.
文摘Objective The relationship between non-high-density lipoprotein(NHDL)cholesterol to high-density lipoprotein cholesterol(HDL-C)ratio(NHHR)and stoke remains unknown.This study aimed to evaluate the association between the adult NHHR and stroke occurrence in the United States of America(USA).Methods To clarify the relationship between the NHHR and stroke risk,this study used a multivariable logistic regression model and a restricted cubic spline(RCS)model to investigate the association between the NHHR and stroke,and data from the National Health and Nutrition Examination Survey(NHANES)from 2005 to 2018.Subgroup and sensitivity analyses were conducted to test the robustness of the results.Results This study included 29,928 adult participants,of which 1,165 participants had a history of stroke.Logistic regression analysis of variables demonstrated a positive association between NHHR and stroke(OR 1.24,95%CI:1.03-1.50,P=0.026).Compared with the lowest reference group of NHHR,participants in the second,third,and fourth quartile had a significantly increased risk of stroke after full adjustments(OR:1.35,95%CI:1.08-1.69)(OR:1.83,95%CI:1.42-2.36)(OR:2.04,95%CI:1.50-2.79).In the total population,a nonlinear dose-response relationship was observed between the NHHR and stroke risk(P non-linearity=0.002).This association remained significant in several subgroup analyses.Further investigation of the NHHR may enhance our understanding of stroke prevention and treatment.Conclusion Our findings suggest a positive correlation between the NHHR and an increased prevalence of stroke,potentially serving as a novel predictive factor for stroke.Timely intervention and management of the NHHR may effectively mitigate stroke occurrence.Prospective studies are required to validate this association and further explore the underlying biological mechanisms.
基金financially supported by Guangdong Province Basic and Applied Basic Research Fund Project(Grant No.2022B1515250009)Liaoning Provincial Natural Science Foundation-Doctoral Research Start-up Fund Project(Grant No.2024-BSBA-05)+1 种基金Major Science and Technology Innovation Project in Shandong Province(Grant No.2024CXGC010803)the National Natural Science Foundation of China(Grant Nos.52271269 and 12302147).
文摘The umbilical,a key component in offshore energy extraction,plays a vital role in ensuring the stable operation of the entire production system.The extensive variety of cross-sectional components creates highly complex layout combinations.Furthermore,due to constraints in component quantity and geometry within the cross-sectional layout,filler bodies must be incorporated to maintain cross-section performance.Conventional design approaches based on manual experience suffer from inefficiency,high variability,and difficulties in quantification.This paper presents a multi-level automatic filling optimization design method for umbilical cross-sectional layouts to address these limitations.Initially,the research establishes a multi-objective optimization model that considers compactness,balance,and wear resistance of the cross-section,employing an enhanced genetic algorithm to achieve a near-optimal layout.Subsequently,the study implements an image processing-based vacancy detection technique to accurately identify cross-sectional gaps.To manage the variability and diversity of these vacant regions,the research introduces a multi-level filling method that strategically selects and places filler bodies of varying dimensions,overcoming the constraints of uniform-size fillers.Additionally,the method incorporates a hierarchical strategy that subdivides the complex cross-section into multiple layers,enabling layer-by-layer optimization and filling.This approach reduces manufac-turing equipment requirements while ensuring practical production process feasibility.The methodology is validated through a specific umbilical case study.The results demonstrate improvements in compactness,balance,and wear resistance compared with the initial cross-section,offering novel insights and valuable references for filler design in umbilical cross-sections.
基金National Nonprofit Institute Research Grant for the Institute of Basic Theory for Chinese Medicine,China Academy of Chinese Medical Sciences:Mechanism of Regulating Phlegm-Dampness Constitution to Prevent Metabolic Diseases based on Gut Microbiota-host DNA Methylation(No.YZ-202151)。
文摘OBJECTIVE:To investigate the difference in gut microbiota between population with damp-heat constitution(DHC)and balanced constitution(BC).METHODS:A multi-centered cross-sectional casecontrol study was conducted,which included 249 participants with damp-heat constitution or balanced constitution.Baseline information of participants was collected,and stool samples were collected for gut microbiota analysis.Principal coordinate analysis,linear discriminant analysis effect size analysis,receiver operating characteristic,random forest model,and phylogenetic investigation of communities by reconstruction of unobserved states methods were used to reveal the relationship between gut microbiota and the damp-heat constitution.RESULTS:Compared to those in the BC group,the richness and diversity of the microbiota,specifically those of several short-chain fatty acid producing genera such as Barnesiella,Coprobacter,and Butyricimonas,were significantly decreased in the DHC group.Regarding biological functions,flavonoid biosynthesis,propanoate metabolism,and nucleotide sugar metabolism were suppressed,while arachidonic acid metabolism and glutathione metabolism were enriched in the DHC group.Finally,a classifier based on the microbiota was constructed to discriminate between the DHC and BC populations.CONCLUSION:The gut microbiota of the DHC population exhibits significantly reduced diversity and is closely related to inflammation,metabolic disorders,and liver steatosis,which is consistent with clinical observations,thus serving as a potential diagnostic tool for traditional Chinese medicine constitution discrimination.
基金supported by an Innovation Fund for Medical Sciences of the Chinese Academy of Medical Sciences (Grant No.2019-I2M-2-007).
文摘Objective:Postpartum nutrition plays a critical role in maternal recovery and long-term health.However,the nutritional status of working mothers in the postpartum period remains understudied.This study aimed to assess the dietary quality of postpartum women in urban Beijing,identify occupational-related factors influencing their diet,and explore potential interventions to improve maternal nutrition during the postpartum period.Methods:In this cross-sectional analysis,554 women one year after delivery were recruited from ten community health centers.Sociodemographic,occupational and postpartum care variables were collected via questionnaire.Dietary intake over the preceding year was assessed using a food frequency questionnaire.The modified dietary balance index for postpartum women were used for dietary quality assessment.Results:The study revealed severe dietary imbalances among postpartum women,characterized by excessive consumption of cereals,eggs,and meats,while their intake of vegetables,fruits,and dairy products was inadequate.According to dietary balance index for postpartum women,66.25%of mothers showed varying degrees of excessive intake.45.31%of mothers experienced varying levels of insufficient intake,with only 19.86%of participants having a relatively balanced diet.Occupational differences were observed,with women in the commercial employment group showing higher levels of excessive food intake.The analysis of influencing factors showed that family monthly income,maternity leave,and postpartum care significantly affected the dietary quality.Conclusions:Postpartum women in Beijing experience widespread dietary imbalances,with both excesses and deficiencies.Occupational context and related factors significantly shape diet quality.These findings highlight the need for targeted nutritional interventions tailored to the specific challenges of different occupational groups.
基金supported by the National Natural Science Foundation of China(Grant Nos.42130608 and 42075142)the National Key Research and Development Program of China(Grant No.2020YFA0608000)the CUIT Science and Technology Innovation Capacity Enhancement Program Project(Grant No.KYTD202330)。
文摘Existing traditional ocean vertical-mixing schemes are empirically developed without a thorough understanding of the physical processes involved,resulting in a discrepancy between the parameterization and forecast results.The uncertainty in ocean-mixing parameterization is primarily responsible for the bias in ocean models.Benefiting from deep-learning technology,we design the Adaptive Fully Connected Module with an Inception module as the baseline to minimize bias.It adaptively extracts the best features through fully connected layers with different widths,and better learns the nonlinear relationship between input variables and parameterization fields.Moreover,to obtain more accurate results,we impose KPP(K-Profile Parameterization)and PP(Pacanowski–Philander)schemes as physical constraints to make the network parameterization process follow the basic physical laws more closely.Since model data are calculated with human experience,lacking some unknown physical processes,which may differ from the actual data,we use a decade-long time record of hydrological and turbulence observations in the tropical Pacific Ocean as training data.Combining physical constraints and a nonlinear activation function,our method catches its nonlinear change and better adapts to the oceanmixing parameterization process.The use of physical constraints can improve the final results.
基金supported by the National Natural Science Foundation of China (Grant Nos.52304227 and 52104133)Scientific and Technological Research Platform for Disaster Prevention and Control of Deep Coal Mining (Anhui University of Science and Technology) (Grant No.DPDCM2208).
文摘To investigate the effects of the maximum principal stress direction(θ)and cross-section shape on the failure characteristics of sandstone,true-triaxial compression experiments were conducted using cubic samples with rectangular,circular,and D-shaped holes.Asθincreases from 0°to 60°in the rectangular hole,the left failure location shifts from the left corner to the left sidewall,the left corner,and then the floor,while the right failure location shifts from the right corner to the right sidewall,right roof corner,and then the roof.Furthermore,the initial failure vertical stress first decreases and then increases.In comparison,the failure severity in the rectangular hole decreases for variousθvalues as 30°>45°>60°>0°.With increasingθ,the fractal dimension(D)of rock slices first increases and then decreases.For the rectangular and D-shaped holes,whenθ=0°,30°,and 90°,D for the rectangular hole is less than that of the D-shaped hole.Whenθ=45°and 60°,D for the rectangular hole is greater than that of the D-shaped hole.Theoretical analysis indicates that the stress concentration at the rectangular and D-shaped corners is greater than the other areas.The failure location rotates with the rotation ofθ,and the failure occurs on the side with a high concentration of compressive stress,while the side with the tensile and compressive stresses remains relatively stable.Therefore,the fundamental reason for the rotation of failure location is the rotation of stress concentration,and the external influencing factor is the rotation ofθ.
基金supported by National Natural Science Foundation of China(No.U1966211)National Key R&D Program of China(No.2021YFB2401400)。
文摘Prediction models were proposed to estimate the reduced Townsend ionization coefficient and ionization cross-section.A shape function of the reduced Townsend ionization coefficient curves was derived from the ionization collision probability model.The function had three parameters:the first ionization potential energy,A_(α),and B_(α).A_(α)and B_(α)were related to the molecule symmetry and size.The polarization of molecules could characterize the molecule symmetry.The multi-layer molecular cross-section(MMCS)was proposed to describe the contributions of electrons and molecule radius on different molecule surfaces to collisions.A prediction model of the ionization cross-section was also proposed based on Aα.The molecule parameters were calculated by the Becke3–Lee–Yang–Parr(B3LYP)method and the 6–311G**basis set.We used available data of 30 and 23 gases,respectively,to build the prediction models of reduced Townsend ionization coefficients and ionization cross-sections.The relationships between the molecular parameters Aαand Bαand the ionization cross-section were built up via nonlinear fittings.The determination coefficients R^(2)of Aα,Bα,and the ionization cross-section were 0.877,0.887,and 0.838,respectively.The results showed that the accuracy of models was positively correlated with the molecule symmetry and reduced electric field.This was mainly related to the accuracy of the MMCS model in predicting Aα.The MMCS model needed to be improved to describe the collision direction selectivity caused by the molecule asymmetry.Under a high reduced electric field,that error of Aαhad less influence on the prediction results.However,the prediction results for single atoms with high symmetry were poor.This may be due to the absolute error of the model close to single atoms’reduced Townsend ionization coefficients.The models could provide the basis for gas insulation prediction and discharge calculations,especially for symmetric molecules under a high electric field.
基金co-supported by National Natural Science Foundation of China (No. 51275414)Aeronautical Science Foundation of China (No. 2011ZE53059)+1 种基金National Defense Basic Research Program (No. 51318040105)Graduate Starting Seed Fund of Northwestern Polytechnical University(No. Z2011006)
文摘The elliptical cross-section spiral equal-channel extrusion （ECSEE） process is simulated by using Deform-3D finite element software. The ratio m of major-axis to minor-axis length for ellipse-cross-section, the torsion angle u, the round-ellipse cross-section transitional channel L1, the elliptical rotation cross-section transitional channel L2 and the ellipse-round cross-section transitional channel L3 are destined for the extrusion process parameters. The average effective strain eave on cross-section of blank, the deformation uniformity coefficient a and the value of maximum damage dmax are chosen to be the optimize indexes, and the virtual orthogonal experiment of L16 （45） is designed. The correlation degree of the process factors affecting eave, a and dmax is analyzed by the numerical simulation results using the weights and grey association model. The process parameters are optimized by introducing the grey situation decision theory and the ECSEE optimal combination of process parameters is obtained： u of 120 , m of 1.55, L1 of 7 mm, L2 of 10 mm, and L3 of 10 mm. Simulation and experimental results show that the material can be refined with the optimized structural parameters of die. Therefore, the optimization results are satisfactory.
基金supported by the Innovation Team and Talents Cultivation Program of National Administration of Traditional Chinese Medicine(ZYYCXTD-C-202006)the High-level traditional Chinese medicine key subject construction project of National Administration of Traditional Chinese Medicine-Evidence-based Traditional Chinese Medicine(ZYYZDXK-2023249).
文摘Background:The bibliometrics of acupuncture are growing rapidly.However,the absence of reporting guidelines may lead to significant duplication and waste,thereby undermining the research’s value.To address this,a knowledge mapping was generated based on published studies to investigate the characteristics of bibliometric studies on acupuncture and the extent of duplicate publications,with the overarching goal of providing a comprehensive overview of the knowledge structure in this field.Methods:This cross-sectional study used three databases(PubMed,Web of Science,and Scopus)to identify relevant studies up to May 1,2024.In addition,the reference lists were retrieved as a supplement.To track research trends,we employed Microsoft Excel and R software to extract,code,and analyze information.Study selection,data extraction,and validation were performed independently by at least two reviewers.The reporting quality of included studies was assessed using the Preliminary guideline for reporting bibliometric reviews of the biomedical literature(BIBLIO).Results:Among the 6,221 bibliometric reviews examined,113 relevant publications were identified,80 focusing on various diseases/conditions.The annual number of publications has gradually increased,with the output in the past four years being 3.52 times higher than that before 2020.China(106)and Chengdu University of Traditional Chinese Medicine(16)have the highest number of publications.The most prolific author is Fan-Rong Liang,with six articles.The first bibliometric study,by Hai-Yan Li,was published in 2010.Journal of Pain Research,with 36 articles,holds the most publications.The top three diseases:diseases of the nervous system;symptoms,signs,or clinical findings not elsewhere classified;and mental,behavioral,or neurodevelopmental disorders.There may be potential duplication in research on 13 diseases/conditions,notably stroke,migraine,pain/analgesia,cancer pain,shoulder pain,facial paralysis/bell’s palsy,chronic pain,and cognitive impairment.In BIBLIO,the most frequently missing items are issues/topics(item 2),quality assessment(item 11),and descriptive findings(item 13).Conclusion:This study demonstrates that acupuncture bibliometrics is actively utilized to identify dominant diseases/conditions,aiding scholars in understand the knowledge structure and main topics.Although the number of related studies is increasing,with an average of 25 studies annually,overlap in some areas highlights the need for adherence to reporting guidelines and careful topic selection to ensure truly valuable insights and knowledge contributions.The adherence to BIBLIO’s 20 proposed items across analyzed articles,highlighting important in reporting practices.
基金Project(RE-KRIS/FF67/020)supported by the King Mongkut's Institute of Technology Ladkrabang(Fundamental Fund by National Science Research and Innovation Fund(NSRF)),Thailand。
文摘A train body's cross-sectional shape has a significant impact on aerodynamic drag and operational safety in high-speed trains(HSTs).This study extracts five design variables from a real-world HST body:height,width,side arc radius,arc radius at the connection between the side and the roof,and arc radius at the connection between the side and the train's bottom.The cross-validated Kriging surrogate model and the genetic algorithm are used to perform two types of aerodynamic optimization,with the cross-sectional area as a constraint.Cross-sectional shapes are optimized in both windless and windy conditions.Numerical results indicate that in a windless environment,the aerodynamic drag coefficient of the whole train is reduced by 2.4%;in a windy condition,the aerodynamic drag coefficient of the entire vehicle is reduced by 2.4%,and the aerodynamic lateral force of the leading car is reduced by 37.8%.These suggest that a flat and wide shape helps to reduce not only overall aerodynamic drag in a windless environment but also aerodynamic load in a windy environment,which can be accomplished by reducing the area of the side wall and top region,lowering the train body's height,increasing its width,and lowering the radius of the side and top arcs.
基金funded by Tianjin Key Medical Discipline(Specialty)Construction Project,China(Grant No.TJYXZDXK-011A)Tianjin Medical University Cancer Institute&Hospital Nursing Special Fund Project(H2304)。
文摘Objectives:This study aimed to classify young breast cancer patients into distinct ambivalence over emotional expression and to explore the factors influencingthe level of ambivalence over emotional expression.Methods:A total of 217 young breast cancer patients were enrolled from a tertiary Grade A oncology hospital in Tianjin,China,using the convenience sampling method.All participants completed the general questionnaire,Ambivalence over Emotion Expression Questionnaire(AEQ),and Family Adapt-Ability and Cohesion Evaluation Scales-Chinese Version(FACES-CV).We employed exploratory latent profileanalysis for ambivalence over emotional expression profilingand logistic regression analysis to identify the influentialfactors Results:The results of the latent profileanalysis supported the models of four latent profiles,which were definedas“low conflict-lowexpression reflection”(19.2%),“high conflict-high inhibition expression”(43.9%),“moderate conflict-highregret expression”(18.1%),and“moderate conflict-desire understand”(18.8%).Logistic regression revealed that family cohesion,marital status,residence,per capita monthly income,and cancer stage were the influencingfactors of ambivalence over emotional expression in young breast cancer patients(P<0.05)Conclusions:Levels of ambivalence over emotional expression ameast cancer patients with breast cancer were highly heterogeneous.Medical staff should provide psychological counseling and health education tailored to the unique characteristics of emotional expression ambivalence in different patient groups to promote healthy emotional expression among patients.
基金supported by the National Natural Science Foundation of China(Grant Nos.11922206 and 11832011)theMajor Project of Science and Technology Innovation 2030(Grant No.2021ZD0113100)the 111 Project(Grant No.B16015).
文摘The coconut structure exhibits inherent impact resistance,with the macroscopically ordered distribution of variable crosssection fibers in its husk playing a crucial role in stress wave propagation and scaling.Inspired by the natural structure and fibers,this study proposes a stress wave propagation model for a variable cross-section bar considering viscous effects.A theoretical model for stress wave propagation in a fusiform-shaped bar with variable cross-section is established,elucidating the stress wave scaling effect observed in coconut fibers.Additionally,a quasi-one-dimensional method for analyzing and measuring stress wave propagation is introduced,and an experimental setup is assembled.Experimental validation of the stress wave scaling effect confirms the theory’s accuracy for stress wave scaling in variable cross-section bars.This research provides theoretical guidance and measurement methods for the design of space landers,automobile anti-collision beams,stress wave collectors,and scalers,as well as for impact testing of macro and micro materials and the design of sustainable plant-based materials for impact protection.
文摘association with academic and clinical performance.This study aimed to determine the EI level of hospital-based nursing students and examine differences between full-time and part-time students.Methods:We conducted a cross-sectional study in a hospital-based nursing school.EI level was measured using the Schutte Self-report Emotional Intelligence Scale(SSEIS).Results:We recruited 287 participants(mean age:21.9 years).Their mean SSEIS score was 119.6(95%CI=118.57-120.65).The mean SSEIS scores of 172 full-time and 115 part-time nurses were 120.7(95%CI=119.3-122.0)and 118.1(95%CI=116.5-119.6),respectively.There was no significant difference between the groups.Conclusion:The EI difference between full-time and part-time nursing students was statistically insignificant.The need for further EI development among both full-time and part-time students must be addressed.
文摘Objective:This study aimed to examine the association between parent-child relationships and physically aggressive behavior among adolescents.Methods:This is a cross-sectional study that uses secondary data from the 2015 Indonesia Global School-Based Health Survey(IGSHS).Health surveys were conducted in 75 schools representing three regions(Sumatra,Java-Bali;Outer Sumatra;and Java-Bali)in 26 provinces and 68 districts/cities in Indonesia(N=10,139 students).Students who participated were aged 12-19 years,were enrolled in public schools in the junior and high school levels.Results:It has been seen that for most middle-aged adolescents(58.7%),their parents(25%-29%)pay less attention to academic assignments(homework),problems,and use of free time.The most significant factors that influence adolescents to commit violence are smoking and consuming alcohol.Adolescents who smoke are twice as likely to commit physical violence compared with adolescents who do not smoke(OR=2.005;95%CI=1.7062-2.396).Meanwhile,adolescents who consume alcohol are 1.8 times more likely to commit physical violence compared with adolescents who do not consume alcohol(OR=1.807;95%CI=1.421-2.298).Conclusions:Through educational activities and consultations,this study’s findings are valuable for establishing parenting programs among those concerned about their children’s aggressive behavior.Meanwhile,counseling programs can be started in schools by conducting self-detection of negative adolescent behavior,such as screening for smoking,alcohol consumption,sleep issues,and attempted suicide.
