The retrospective study by Edwar et al reinforces the role of therapeutic penetrating keratoplasty(PK)as a vital intervention in severe,treatment-resistant infectious keratitis.In advanced cases—often complicated by ...The retrospective study by Edwar et al reinforces the role of therapeutic penetrating keratoplasty(PK)as a vital intervention in severe,treatment-resistant infectious keratitis.In advanced cases—often complicated by trauma,delayed presentation,and corneal perforation—PK restores globe integrity and provides limited visual recovery.However,its application is constrained by graft-related complications and donor shortages,particularly in low-resource settings.These limitations highlight the need for earlier,globe-sparing strategies to prevent progression and reduce surgical demand.Photoactivated chromophore for infectious keratitis-corneal collagen cross-linking(PACK-CXL)has emerged as a promising adjunct or alternative.With both antimicrobial and tissue-stabilizing effects,PACK-CXL may control infection and preserve corneal structure in earlier stages.A layered treatment framework that incorporates PACK-CXL as an initial intervention and reserves PK for refractory cases may help improve clinical outcomes.Further studies are needed to define their best use in practice.展开更多
Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric ...Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric alginate(DI/FeA),DI/cobalt alginate(DI/CoA),and DI/nickel alginate(DI/Ni A)films are fabricated by employing sodium alginate(SA)with a three-dimensional network structure as the film matrix,via ionic cross-linking of SA with Fe^(3+),Co^(2+),and Ni^(2+)ions.The study demonstrates that the ionic cross-linking enhances the hydrophobic performance of the films,with the water contact angle increasing from 82.1° to 123.5°.Concurrently,the films'near-infrared(NIR)light absorption improved.Furthermore,transition metal ions facilitate accelerated electron transfer,thereby catalyzing the thermal decomposition of DATNBI.Under 1064 nm laser irradiation,the DI/Fe A film exhibits exceptional combustion performance,with an ignition delay time as low as 76 ms.It successfully acts as an NIR laser ignition medium to initiate the self-sustained combustion of CL-20.This study demonstrates the synergistic realization of enhanced hydrophobicity,improved photosensitivity,and promoted catalytic decomposition through microstructural design of the material,providing new insights for the design of additive-free EMs in laser ignition applications.展开更多
Corn starch(CS)is a renewable,biodegradable polysaccharide valued for its film-forming ability,yet native CS films exhibit lowmechanical strength,highwater sensitivity,and limited thermal stability.This study improves...Corn starch(CS)is a renewable,biodegradable polysaccharide valued for its film-forming ability,yet native CS films exhibit lowmechanical strength,highwater sensitivity,and limited thermal stability.This study improves CS-based films by blending with poly(vinyl alcohol)(PVA)or glycerol(GLY)and using citric acid(CA)as a green,non-toxic cross-linker.Composite films were prepared by casting CS–PVA or CS-GLY with CA at 0%-0.20%(w/w of starch).The influence of CA on physicochemical,mechanical,optical,thermal,and water barrier properties was evaluated.CA crosslinking markedly enhanced the tensile strength,water resistance,and thermal stability of CS-PVA films while increasing transparency in CS–GLY films.At 0.20%CA,the composite achieved 34.99MPa tensile strength,reducedwater vapor permeability,andminimized water uptake.FTIR confirmed ester bond formation between CAand hydroxyl groups of CS,PVA,and GLY,whereas thermal analysis showed higher decomposition temperatures and lower weight loss in crosslinked films.Increasing CA levels also decreased opacity and improved light transmittance,indicating greater homogeneity and reduced crystallinity.This dual-polymer matrix combined with a natural crosslinking strategy provides a sustainable route to high-performance,biodegradable CS-based packaging materials.展开更多
Ethanol perm-selective PDMS/PVDF composite membranes were prepared by curing polydimethylsiloxane (PDMS) with various cross-linking reagents,such as tetraethoxylsilane(TEOS),γ-aminopropyltriethoxylsilane(APTEOS), phe...Ethanol perm-selective PDMS/PVDF composite membranes were prepared by curing polydimethylsiloxane (PDMS) with various cross-linking reagents,such as tetraethoxylsilane(TEOS),γ-aminopropyltriethoxylsilane(APTEOS), phenyltrimethoxylsilane(PTMOS) and octyltrimethoxylsilane(OTMOS) as well.The cross-linking density and surface properties of the PDMS active layer were adjusted by varying cross-linking reagents.The pervaporation performance of PDMS membranes cured with different cross-linking reagents was investig...展开更多
LiMnxFe1-xPO_(4) is a promising cathode candidate due to its high security and the availability of a high 4.1 V operating voltage and high energy density.However,the poor electrochemical kinetics and structural instab...LiMnxFe1-xPO_(4) is a promising cathode candidate due to its high security and the availability of a high 4.1 V operating voltage and high energy density.However,the poor electrochemical kinetics and structural instability currently hinder its broader application.Herein,inspired by the hydrogen-bonded cross-linking and steric hindrance effect between short-chain polymer molecules(polyethylene glycol-400,PEG-400),the pomegranate-type LiMn_(0.5)Fe_(0.5)PO_(4)-0.5@C(P-LMFP@C)cathode materials with 3D ion/electron dual-conductive network structure were constructed through ball mill-assisted spray-drying method.The intermolecular effects of PEG-400 promote the spheroidization and uniform PEG coating of LMFP precursor,which prevents agglomeration during sintering.The 3D ion/electron dual-conductive network structure in P-LMFP@C accelerates the Li^(+)transport kinetics,improving the rate performance and cycling stability.As a result,the designed P-LMFP@C has remarkable electrochemical behavior,boasting excellent capacity retention(98%after 100 cycles at the 1C rate)and rate capability(91 mAh·g^(-1)at 20C).Such strategy introduces a novel window for designing high-performance olivine cathodes and offers compatibility with a range of energy storage materials for diverse applications.展开更多
AIM:To compare simultaneous corneal collagen cross-linking(CXL)with intracorneal ring segment(ICRS)implantation versus successive ICRS followed by CXL and detect the impact of the timing of CXL after ICRS implantation...AIM:To compare simultaneous corneal collagen cross-linking(CXL)with intracorneal ring segment(ICRS)implantation versus successive ICRS followed by CXL and detect the impact of the timing of CXL after ICRS implantation in the successive method.METHODS:This is a retrospective study of the records of three groups of patients.Group 1 of 28 patients were operated on with simultaneous ICRS implantation and CXL,group 2 of 32 patients had ICRS implantation followed by CXL after 1mo,and group 3 of 38 patients had ICRS implantation followed by CXL after 3mo.The three groups had follow-up visits after 6,12,and 24mo.RESULTS:The preoperative data,age,and gender differences among 3 groups revealed no significant differences.The postoperative spherical equivalent and best-corrected visual acuity were improved significantly in all groups compared to the baseline,which were more evident in groups 1 and 2.The differences between preoperative and postoperative mean values of mean of K readings(Km)and maximum K reading(Kmax)at 6mo were 4.66 and 4.1 D in group 1,4.43 and 4.64 D in group 2,but 3.2 and 3.4 D in group 3,respectively.The spherical aberrations and the vertical coma showed significant postoperative changes in all groups,and trefoil showed nonsignificant changes.CONCLUSION:Simultaneous and sequential ICRS implantation and CXL at 1mo has similar Km and Kmax better postoperative changes than when both surgeries were done at three-month intervals.展开更多
AIM:To investigate the response of the anterior and posterior corneal surface in femtosecond laser-assisted convex stromal lenticule addition keratoplasty(SLAK)combined with cross-linking(CXL)for treating keratoconus ...AIM:To investigate the response of the anterior and posterior corneal surface in femtosecond laser-assisted convex stromal lenticule addition keratoplasty(SLAK)combined with cross-linking(CXL)for treating keratoconus at the first 3mo of follow-up.METHODS:In this prospective observational study,20 eyes of 20 keratoconus patients who underwent SLAK combined with CXL were included.The morphological indices in keratometry and elevation data were recorded from the Sirius at baseline and 1 and 3mo postoperatively.The mean values of maximum keratometry(K_(max)),flat keratometry(K_(1)),and steep keratometry(K_(2))at the central,3-mm,5-mm,and 7-mm areas were measured from the curvature map.The changes in anterior and posterior corneal elevation under the best-fit sphere(BFS)radius at seven points horizontally of the center,3-mm,5-mm,and 7-mm area from the center at both nasal(N)and temporal(T)side were measured from elevation map.RESULTS:For the front corneal curvature,K_(1),and K_(2) at 3-mm,5-mm,and 7-mm of the anterior corneal surface increased significantly 1mo postoperatively(all P<0.05)and remained unchanged until 3mo(P>0.05).For the back corneal curvature,K_(1) and K_(2) along the 3-mm back meridian significantly decreased after month 1(P=0.002,0.077,respectively).Posterior K_(2)-readings along the 5-mm and 7-mm did not change after surgery(P>0.05).Anterior BFS decreased 1mo(P<0.001)postoperatively but remained unchanged until 3mo after SLAK(P>0.05).There was no change in posterior BFS before and after the surgery(P>0.05).Anterior elevation at N5,N3,central,and T5 points and posterior elevation at central and T7 points shifted backward 1mo postoperatively(all P<0.05)and remained stable until 3mo(P>0.05).CONCLUSION:The myopic SLAK combined with CXL is an economical alternative for stabilizing the corneal surface in severe keraoconus.“Pseudoprogression”occurs in the early phase postoperatively,but it is not an indicator of keratoconus progression.展开更多
Aging is a persistent topic of interest,with skin aging as its most visible manifestation,characterized by a reduction in intact collagen and elastic fibers in the dermis.Hyaluronic acid,a vital component of the extra...Aging is a persistent topic of interest,with skin aging as its most visible manifestation,characterized by a reduction in intact collagen and elastic fibers in the dermis.Hyaluronic acid,a vital component of the extracellular matrix present in the skin,has become a mainstream method for skin rejuvenation through injections.However,the rapid degradation of pure hyaluronic acid,combined with insufficient maintenance duration and often limited therapeutic effects,presents significant challenges for injectable treatments.Additionally,low patient compliance due to discomfort from needles penetrating the dermal layer further complicates its use.In this review,we summarize and compare existing interventions for skin aging,focusing on strategies to prolong the degradation cycle of hyaluronic acid,including variations in cross-linking modalities and injection techniques.We conclude that the injection of cross-linked modified hyaluronic acid via microneedles represents a promising approach to extend the degradation cycle,offering valuable insights for current therapeutic strategies.展开更多
Polymer binders possess significant potential in alleviating the volume expansion issues of silicon-based anodes,yet remain challenging due to insufficient interfacial interactions with individual components(Si,C,and ...Polymer binders possess significant potential in alleviating the volume expansion issues of silicon-based anodes,yet remain challenging due to insufficient interfacial interactions with individual components(Si,C,and Cu)of the anode.Herein,we report the synthesis of a stable three-dimensional network structure of the PAA-PEA(polyacrylic acid-polyether amines)polymer binder through intermolecular physicochemical dual cross-linking.By incorporating polar functional groups,the binder molecules not only form strong C-O-Si,N-Si,O=C-O-C,and O=C-O-Cu covalent bonds but also enhance non-covalent interactions with Si,C,and Cu,thereby improving adhesion between the binder and each interface of the anode.Furthermore,weak hydrogen bonds,acting as"sacrificial bonds",dissipate energy and disperse accumulated stress,improving the material flexibility.Due to the high mechanical stability of the framework,which combines both rigidity and flexibility and the coupling effect at the three interfaces,the movement and separation of electrode components are effectively restrained,significantly enhancing the cycling stability of silicon-graphite anodes.The PAA-PEA 2000 electrode exhibits a capacity retention of 78% after 500 cycles at a current density of 0.2 A g^(-1).This work provides insights into the mechanism of binders and guides the design of polymer binders for high-performance Si-based electrodes.展开更多
In this study,a novel cost-effective methodology was developed to enhance the gas barrier properties and permselectivity of unfilled natural rubber(NR)/polybutadiene rubber(BR)composites through the construction of a ...In this study,a novel cost-effective methodology was developed to enhance the gas barrier properties and permselectivity of unfilled natural rubber(NR)/polybutadiene rubber(BR)composites through the construction of a heterogeneous structure using pre-vulcanized powder rubber to replace traditional fillers.The matrix material is composed of a blend of NR and BR,which is widely used in tire manufacturing.By incorporating pre-vulcanized trans-1,4-poly(isoprene-co-butadiene)(TBIR)rubber powder(pVTPR)with different cross-linking densities and contents,significant improvements in the gas barrier properties and CO_(2)permselectivity of the NR/BR/pVTPR composites were observed.The results indicated that compared to NR/BR/TBIR composites prepared through direct blending of NR,BR,and TBIR,the NR/BR/pVTPR composites exhibited markedly superior gas barrier properties.Increasing the cross-linking density of pVTPR resulted in progressive enhancement of the gas barrier properties of the NR/BR/pVTPR composite.For example,the addition of 20 phr pVTPR with a cross-linking density of 346 mol/m^(3)resulted in a 79%improvement in the oxygen barrier property of NR/BR/pVTPR compared to NR/BR,achieving a value of 5.47×10^(-14)cm^(3)·cm·cm^(-2)·s^(-1)·Pa^(-1).Similarly,the nitrogen barrier property improved by 76%compared to NR/BR,reaching 2.4×10^(-14)cm^(3)·cm·cm^(-2)·s^(-1)·Pa^(-1),which is 28%higher than the conventional inner liner material brominated butyl rubber(BIIR,PN2=3.32×10^(-14)cm^(3)·cm·cm^(-2)·s^(-1)·Pa^(-1)).Owing to its low cost,exceptional gas barrier properties,superior adhesion to various tire components,and co-vulcanization capabilities,the NR/BR/pVTPR composite has emerged as a promising alternative to butyl rubber in the inner liner of tires.Furthermore,by fine-tuning the cross-linking density of pVTPR,the high-gas-barrier NR/BR/pVTPR composites also demonstrated remarkable CO_(2)permselectivity,with a CO_(2)/N2 selectivity of 61.4 and a CO_(2)/O_(2)selectivity of 26.12.This innovation provides a novel strategy for CO_(2)capture and separation,with potential applications in future environmental and industrial processes.The multifunctional NR/BR/pVTPR composite,with its superior gas barrier properties and CO_(2)permselectivity,is expected to contribute to the development of safer,greener,and more cost-effective transportation solutions.展开更多
Selective hydrogenation of furfural to furfuryl alcohol is a great challenge in the hydrogenation field due to thermodynamic preference for hydrogenation of C=C over C=O.Herein,a novel Al_(2)O_(3)/C-u hybrid catalyst,...Selective hydrogenation of furfural to furfuryl alcohol is a great challenge in the hydrogenation field due to thermodynamic preference for hydrogenation of C=C over C=O.Herein,a novel Al_(2)O_(3)/C-u hybrid catalyst,composed of N-modified dendritic carbon networks supporting Al_(2)O_(3)nanoparticles,was successfully prepared via carbonizing the freeze-dried gel from spontaneous cross-linking of alginate,Al3+and urea.The obtained carbon-supported Al_(2)O_(3)hybrid catalyst has a high ratio (31%) of Al species in pentahedral-coordinated state.The introduction of urea enhances the surface N content,the ratio of pyrrolic N,and specific surface area of catalyst,leading to improved adsorption capacity of C=O and the accessibility of active sites.In the furfural hydrogenation reaction with isopropyl alcohol as hydrogen donor,Al_(2)O_(3)/C-u catalyst achieved a 90%conversion of furfural with 98.0% selectivity to furfuryl alcohol,outperforming that of commercial γ-Al_(2)O_(3).Moreover,Al_(2)O_(3)/C-u demonstrates excellent catalytic stability in the recycling tests attributed to the synergistic effect of abundant weak Lewis acid sites and the anchoring effect of the carbon network on Al_(2)O_(3)nanoparticles.This work provides an innovative and facile strategy for fabrication of carbon-supported Al_(2)O_(3)hybrid catalysts with rich AlVspecies,serving as a high selective hydrogenation catalyst through MPV reaction route.展开更多
We successfully incorporated phenyl groups into a small-molecule quaternary ammonium cross-linker and synthesized cross-linked polybenzimidazole membranes via a one-step cross-linking process.Compared with conventiona...We successfully incorporated phenyl groups into a small-molecule quaternary ammonium cross-linker and synthesized cross-linked polybenzimidazole membranes via a one-step cross-linking process.Compared with conventional quaternary ammonium-crosslinked benzimidazole membranes,the introduction of phenyl groups significantly increases the free volume within the membrane.After phosphoric acid doping,the benzimidazole membrane with larger free volume retains more phosphoric acid compared to conventional quaternary ammonium-crosslinked membranes,forming an extensive hydrogen-bonding network that effectively enhances its anhydrous proton conductivity.The anhydrous proton conductivity reaches 91 mS·cm^(-1)at 160℃,substantially higher than that of conventional quaternary ammonium-crosslinked membranes with the same mass fraction.Benefiting from the improved conductivity,the membrane electrode assembly exhibits reduced ohmic polarization,achieving a peak power density of 792 mW·cm^(-2)at 160℃.展开更多
The curing behavior of composites significantly influences their performance,making it crucial to understand the curing process.This study experimentally measured specific heat capacity,thermal conductivity,glass tran...The curing behavior of composites significantly influences their performance,making it crucial to understand the curing process.This study experimentally measured specific heat capacity,thermal conductivity,glass transition temperature,coefficient of thermal expansion,and cure shrinkage of materials.A simulation model of its curing deformation was established and validated against strain data obtained from fiber Bragg grating experiments.The effects of thickness,heating rate,and cooling rate on the curing temperature field and residual stress field during the molding of thick-section composite plates were analyzed.展开更多
The development of polymer nanoparticle composites with enhanced thermal and antibacterial properties is essential for next-generation biomedical materials.However,conventional polymers often exhibit limited bioactivi...The development of polymer nanoparticle composites with enhanced thermal and antibacterial properties is essential for next-generation biomedical materials.However,conventional polymers often exhibit limited bioactivity and poor resistance to degradation,restricting their functional applications.The novelty of this study involves the combination of the bio-derived cross-linker 2,5-bis(aminomethyl)furan(BAF)into poly(methylmethacrylate)PMMA to form a cross-linked network incorporated with various ratios of ZnO nanoparticles(ZnO NPs),resulting in improved biological and thermal properties.The surface morphologies,material crystallinity,and thermal degradation properties of the synthesized BAF-PMMA/ZnO were investigated using Scanning Electron microscopy(SEM),Energy-Dispersive X-ray spectroscopy(EDX),X-ray diffraction(XRD),andThermogravimetric characterization technique(TGA),respectively.The prepared BAF-PMMA/ZnO nanocomposites showed an enhancement in the crystallinity after increasing the ratio of ZnO NPs compared to the amorphous cross-linked BAF-PMMA polymer.The thermal stability of nanocomposites was significantly enhanced after the introduction of ZnO NPs into crosslinked BAF-PMMA polymer.The resultant nanocomposites BAF-PMMA/ZnO were examined as antibacterial agents against the Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)bacterial strains.The results showed that most BAF-PMMA/ZnO nanocomposites have antibacterial activity against both bacterial species compared to the pure cross-linked BAF-PMMA polymer.The BAF-PMMA/ZnO 10 wt.%sample shows the highest inhibition zone of(16.3±0.33)against E.coli.These outcomes demonstrate that such nanocomposites offer a viable pathway towardmultipurpose biomaterials with exceptional structural and biological features.展开更多
In order to determine the best loading density of tobacco leaf with cage clamp in bulk-curing barns, a curing test was conducted on middle-part tobacco leaves. The results showed that for good appearance quality of cu...In order to determine the best loading density of tobacco leaf with cage clamp in bulk-curing barns, a curing test was conducted on middle-part tobacco leaves. The results showed that for good appearance quality of cured tobacco, the loading density at 59.52 kg/m2 （4 000 kg/barn） was the best, fol owed by 66.96 kg/m2 （4 500 kg/barn） and 74.40 kg/m2 （5 000 kg/barn）. As leaf loading density increased, the contents of leaf nicotine and total nitrogen increased, sugar content had smal changes, the ratio of sugar to nicotine decreased and tended to be balanced and the content of neutral aroma substances was decreasing, but the difference among treatments was not significant. With the increase of loading density, the sensory quality of cured leaf was better. When leaf loading density was 66.96 kg/m2 （4 500 kg/barn）, apperance quality of cured leaf improved considerably, with prominent aro-ma. Therefore, the best loading density of tobacco leaf in cage clamp of bulk-curing barn would be 66.96 kg/m2 （4 500 kg/barn） .展开更多
CuItivars K326, Yunyan 87 and Guiyan 4 were used to investigate the curing characteristics and suitabIe harvest maturity of fresh fIue-cured tobacco Ieaves in Ankang tobacco growing areas. ResuIts indicated that the w...CuItivars K326, Yunyan 87 and Guiyan 4 were used to investigate the curing characteristics and suitabIe harvest maturity of fresh fIue-cured tobacco Ieaves in Ankang tobacco growing areas. ResuIts indicated that the water Ioss of K326 was sIow,and the Ieaves were resistant to curing and reIative easiIy to cure. The water Ioss of Yunyan 87 and Guiyan 4 were quick, and the Ieaves with normal resistance to curing were reIative difficuIt to cure. For Guiyan 4, the shrinkage of CM1 maturity was the Iargest. For K326 and Yunyan 87, the shrinkages of CM2 maturity were the Iargest whiIe the shrinkage of CM1 maturity was the Iowest, but the difference did not reach statistical significance. The proportion of top-middIe-grade tobacco Ieaves and average price for K326 were the highest with XM2, CM2 and BM2 maturity, and for Yunyan 87 were XM1, CM3 and BM2 maturity. For K326, Ieaves with XM2, CM2 and BM2 maturity showed the balanced chemical components and the best smoking quality.展开更多
[Objective] The aim was to research effects of bamboo split curing method and steely barn curing method on quality of yellow sun-cured tobacco, providing scientific references for optimization of curing technology of ...[Objective] The aim was to research effects of bamboo split curing method and steely barn curing method on quality of yellow sun-cured tobacco, providing scientific references for optimization of curing technology of yellow sun-cured tobacco. [method] The tobaccos were divided into two groups treated with two methods and the related indices of treated tobaccos were then measured to evaluate effects of curing methods on quality of yellow sun-cured tobacco. [Result] Tobaccos treated with two methods were all dominated by reddish yellow and yellow; exterior quality differed little. In detail, total sugar and reducing sugar in an average level in three locations were all higher with method A than those with method B, but nicotine and total N were lower; comprehensive chemical components in group with method B proved more appropriate with higher K. In addition, sensory qualities of leaves in moderate and bottom locations were better with method B compared with method A; sensory quality of top leaves was better; comprehensive sensory quality of leaves treated with method B proved better. On the other hand, cost for method A was 2.82 times of method B; the area of sun-curing field was 3.27 times and manage- ment work was 1.77 times, which indicated that method B is low-cost and time-saving, which would be a guarantee of tobacco quality. [Conclusion] The research provides scientific references for rational use of tobacco resources and optimization of sun-curing technology.展开更多
[Objective] This study was conducted to compare the aroma quality of up-per leaves of K326 flue-cured in different barns, and provide theoretical references for the development and optimization of bulk curing barn and...[Objective] This study was conducted to compare the aroma quality of up-per leaves of K326 flue-cured in different barns, and provide theoretical references for the development and optimization of bulk curing barn and the supporting tech-niques. [Method] The upper leaves of K326 were flue-cured in a commonness barn, a four-shelf bulk curing barn and a three-shelf bulk curing barn separately, and then the contents of aroma components and taste quality indices of the finished leaves were measured and compared. [Result] The contents of total aroma components, chromoplast pigment degradation products, phenylalanine aroma components and neophytadiene showed no significant differences in the leaves flue-cured in four-shelf bulk curing barn and commonness barn, but were significantly or very significantly higher than those in the leaves flue-cured in three-shelf bulk curing barn. The con-tents of carotenoid degradation products, Mail ard reaction products, cembranes aro-ma components and total aroma components （except neophytadiene） showed no significant difference among the three treatments. The results of sensory evaluation revealed that the sensory taste of the leaves flue-cured in four-shelf bulk curing barn was the best, as the finished leaves had rich, delicate aroma, comfortable and clean aftertaste. The leaves flue-cured in commonness barn was better than those flue-cured in three-shelf bulk curing barn in aroma quality, amount and aftertaste. [Conclusion] The four-shelf bulk curing barn had a large volume for tobacco leaf processing, but a similar baking environment to the commonness barn, which is conducive to the formation and accumulation of aroma components, so the finished leaves had similar appearance and quality with those flue-cured in commonness barn. The upper flue-cured leaves in three-shelf bulk curing bran had poorer quality than those flue-cured in the other two barns.展开更多
A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A（DGEBA） and flexibleα,ω-bisamino（n-alkylene）phenyl terminated poly...A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A（DGEBA） and flexibleα,ω-bisamino（n-alkylene）phenyl terminated poly（ethylene glycol）.The influences of the n-alkylene inserted in aminophenyl of flexible amino-terminated polythers（ATPE） on the mechanical properties,fractographs and curing kinetics of the ATPE-DGEBA cured products were studied.The results show that the insertion of n-alkylene group into the aminophenyl group of the ATPE,on one hand,can significantly increase the strain relaxation rate and decrease glass transition temperature of the ATPE-DGEBA cured products,resulting in slight decrease of the Young’s modulus and tensile strength,and significant increase of the toughness and elongation of the ATPE-DGEBA cured products.On the other hand,it can remarkably enhance the reactivity of amine with epoxy,much accelerating the curing rate of the ATPE-DGEBA systems.The activation energy of DGEBA cured by BAPTPE,BAMPTPE and BAEPTPE was 53.1,28.5 and 25.4 kJ·mol;,respectively.The as-obtained ATPE-DGEBA cured products are homogeneous, transparent,and show excellent mechanical properties including tensile strength and toughness.Thus they are promising to have important applications in structure adhesives,casting bulk materials,functional coatings,cryogenic engineering, damping and sound absorbing materials.展开更多
The cure kinetics of diglycidyl ether of bisphenol A （DGEBA） with hyperbranched poly （3-hydroxyphenyl） phosphate（HHPP） as the curing agent was investigated by means of non-isothermal differential scanning calori...The cure kinetics of diglycidyl ether of bisphenol A （DGEBA） with hyperbranched poly （3-hydroxyphenyl） phosphate（HHPP） as the curing agent was investigated by means of non-isothermal differential scanning calorimetry （DSC） at various heating rates. The results were compared with the corresponding results by using 1,3-dihydroxybenzene（DHB） as a model compound. The results show that HHPP can enhance the cure reaction of DGEBA, resulting in the decrease of the peak temperature of the curing curve as well as the decrease of the activation energy because of the flexible --P--O-- groups in the backbone of HHPP. However, both the activation energy of the cured polymer and the peak temperature of the curing curve are increased with DHB as a curing agent. The cure kinetics of the DGEBA/HHPP system was calculated by using the isoconversional method given by Malek. It was found that the two-parameter autocatalytic model（Sestak-Berggren equation） is the most adequate one to describe the cure kinetics of the studied System at various heating rates. The obtained non-isothermal DSC curves from the experimental data show the results being accordant with those theoretically calculated.展开更多
文摘The retrospective study by Edwar et al reinforces the role of therapeutic penetrating keratoplasty(PK)as a vital intervention in severe,treatment-resistant infectious keratitis.In advanced cases—often complicated by trauma,delayed presentation,and corneal perforation—PK restores globe integrity and provides limited visual recovery.However,its application is constrained by graft-related complications and donor shortages,particularly in low-resource settings.These limitations highlight the need for earlier,globe-sparing strategies to prevent progression and reduce surgical demand.Photoactivated chromophore for infectious keratitis-corneal collagen cross-linking(PACK-CXL)has emerged as a promising adjunct or alternative.With both antimicrobial and tissue-stabilizing effects,PACK-CXL may control infection and preserve corneal structure in earlier stages.A layered treatment framework that incorporates PACK-CXL as an initial intervention and reserves PK for refractory cases may help improve clinical outcomes.Further studies are needed to define their best use in practice.
基金supported by Research Fund of SWUST for PhD(Grant No.22zx7175)Sichuan Science and Technology Program(Grant No.2024NSFSC1097)。
文摘Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric alginate(DI/FeA),DI/cobalt alginate(DI/CoA),and DI/nickel alginate(DI/Ni A)films are fabricated by employing sodium alginate(SA)with a three-dimensional network structure as the film matrix,via ionic cross-linking of SA with Fe^(3+),Co^(2+),and Ni^(2+)ions.The study demonstrates that the ionic cross-linking enhances the hydrophobic performance of the films,with the water contact angle increasing from 82.1° to 123.5°.Concurrently,the films'near-infrared(NIR)light absorption improved.Furthermore,transition metal ions facilitate accelerated electron transfer,thereby catalyzing the thermal decomposition of DATNBI.Under 1064 nm laser irradiation,the DI/Fe A film exhibits exceptional combustion performance,with an ignition delay time as low as 76 ms.It successfully acts as an NIR laser ignition medium to initiate the self-sustained combustion of CL-20.This study demonstrates the synergistic realization of enhanced hydrophobicity,improved photosensitivity,and promoted catalytic decomposition through microstructural design of the material,providing new insights for the design of additive-free EMs in laser ignition applications.
基金supported through RIIM Competition funding from the Indonesia Endowment Fund for Education Agency,Ministry of Finance of the Republic of Indonesia and National Research and Innovation Agency of Indonesia according to the contract number:61/IV/KS/5/2023 and 2131/UN6.3.1/PT.00/2023.
文摘Corn starch(CS)is a renewable,biodegradable polysaccharide valued for its film-forming ability,yet native CS films exhibit lowmechanical strength,highwater sensitivity,and limited thermal stability.This study improves CS-based films by blending with poly(vinyl alcohol)(PVA)or glycerol(GLY)and using citric acid(CA)as a green,non-toxic cross-linker.Composite films were prepared by casting CS–PVA or CS-GLY with CA at 0%-0.20%(w/w of starch).The influence of CA on physicochemical,mechanical,optical,thermal,and water barrier properties was evaluated.CA crosslinking markedly enhanced the tensile strength,water resistance,and thermal stability of CS-PVA films while increasing transparency in CS–GLY films.At 0.20%CA,the composite achieved 34.99MPa tensile strength,reducedwater vapor permeability,andminimized water uptake.FTIR confirmed ester bond formation between CAand hydroxyl groups of CS,PVA,and GLY,whereas thermal analysis showed higher decomposition temperatures and lower weight loss in crosslinked films.Increasing CA levels also decreased opacity and improved light transmittance,indicating greater homogeneity and reduced crystallinity.This dual-polymer matrix combined with a natural crosslinking strategy provides a sustainable route to high-performance,biodegradable CS-based packaging materials.
基金supported by the Major State Basic Research Program of China(No.2009CB623404)National NaturalScience Foundation of China(Nos.20736003,20676067)+2 种基金National High Technology Research and Development Programof China(No.2007AA06Z317)Foundation of Ministry of Education of China(No.20070003130)Foundation of theState Key Laboratory of Chemical Engineering(SKL-ChE-08A01).
文摘Ethanol perm-selective PDMS/PVDF composite membranes were prepared by curing polydimethylsiloxane (PDMS) with various cross-linking reagents,such as tetraethoxylsilane(TEOS),γ-aminopropyltriethoxylsilane(APTEOS), phenyltrimethoxylsilane(PTMOS) and octyltrimethoxylsilane(OTMOS) as well.The cross-linking density and surface properties of the PDMS active layer were adjusted by varying cross-linking reagents.The pervaporation performance of PDMS membranes cured with different cross-linking reagents was investig...
基金supported by the Key Technologies R&D Program of Xiamen(No.3502Z20231057)Industry Leading Key Projects of Fujian Province(No.2022H0057)+2 种基金the National Natural Science Foundation of China(No.21975212)High-Level Talent Start-Up Foundation of Xiamen Institute of Technology for financial support(No.YKJ23017R)Graduate Science and Technology Innovation Program of Xiamen University of Technology(No.YKJCX2023194).
文摘LiMnxFe1-xPO_(4) is a promising cathode candidate due to its high security and the availability of a high 4.1 V operating voltage and high energy density.However,the poor electrochemical kinetics and structural instability currently hinder its broader application.Herein,inspired by the hydrogen-bonded cross-linking and steric hindrance effect between short-chain polymer molecules(polyethylene glycol-400,PEG-400),the pomegranate-type LiMn_(0.5)Fe_(0.5)PO_(4)-0.5@C(P-LMFP@C)cathode materials with 3D ion/electron dual-conductive network structure were constructed through ball mill-assisted spray-drying method.The intermolecular effects of PEG-400 promote the spheroidization and uniform PEG coating of LMFP precursor,which prevents agglomeration during sintering.The 3D ion/electron dual-conductive network structure in P-LMFP@C accelerates the Li^(+)transport kinetics,improving the rate performance and cycling stability.As a result,the designed P-LMFP@C has remarkable electrochemical behavior,boasting excellent capacity retention(98%after 100 cycles at the 1C rate)and rate capability(91 mAh·g^(-1)at 20C).Such strategy introduces a novel window for designing high-performance olivine cathodes and offers compatibility with a range of energy storage materials for diverse applications.
文摘AIM:To compare simultaneous corneal collagen cross-linking(CXL)with intracorneal ring segment(ICRS)implantation versus successive ICRS followed by CXL and detect the impact of the timing of CXL after ICRS implantation in the successive method.METHODS:This is a retrospective study of the records of three groups of patients.Group 1 of 28 patients were operated on with simultaneous ICRS implantation and CXL,group 2 of 32 patients had ICRS implantation followed by CXL after 1mo,and group 3 of 38 patients had ICRS implantation followed by CXL after 3mo.The three groups had follow-up visits after 6,12,and 24mo.RESULTS:The preoperative data,age,and gender differences among 3 groups revealed no significant differences.The postoperative spherical equivalent and best-corrected visual acuity were improved significantly in all groups compared to the baseline,which were more evident in groups 1 and 2.The differences between preoperative and postoperative mean values of mean of K readings(Km)and maximum K reading(Kmax)at 6mo were 4.66 and 4.1 D in group 1,4.43 and 4.64 D in group 2,but 3.2 and 3.4 D in group 3,respectively.The spherical aberrations and the vertical coma showed significant postoperative changes in all groups,and trefoil showed nonsignificant changes.CONCLUSION:Simultaneous and sequential ICRS implantation and CXL at 1mo has similar Km and Kmax better postoperative changes than when both surgeries were done at three-month intervals.
基金Supported by the Social Development Grant of Shaanxi Province(No.2022SF-404)the Science and Technology Program of Xi’an,China(No.23YXYJ0010,No.23YXYJ0037)+1 种基金the Research Project of Xi’an Health Commission(No.2024ms05)the Technology Innovation Supporting Program of Shaanxi(No.2024RS-CXTD-11).
文摘AIM:To investigate the response of the anterior and posterior corneal surface in femtosecond laser-assisted convex stromal lenticule addition keratoplasty(SLAK)combined with cross-linking(CXL)for treating keratoconus at the first 3mo of follow-up.METHODS:In this prospective observational study,20 eyes of 20 keratoconus patients who underwent SLAK combined with CXL were included.The morphological indices in keratometry and elevation data were recorded from the Sirius at baseline and 1 and 3mo postoperatively.The mean values of maximum keratometry(K_(max)),flat keratometry(K_(1)),and steep keratometry(K_(2))at the central,3-mm,5-mm,and 7-mm areas were measured from the curvature map.The changes in anterior and posterior corneal elevation under the best-fit sphere(BFS)radius at seven points horizontally of the center,3-mm,5-mm,and 7-mm area from the center at both nasal(N)and temporal(T)side were measured from elevation map.RESULTS:For the front corneal curvature,K_(1),and K_(2) at 3-mm,5-mm,and 7-mm of the anterior corneal surface increased significantly 1mo postoperatively(all P<0.05)and remained unchanged until 3mo(P>0.05).For the back corneal curvature,K_(1) and K_(2) along the 3-mm back meridian significantly decreased after month 1(P=0.002,0.077,respectively).Posterior K_(2)-readings along the 5-mm and 7-mm did not change after surgery(P>0.05).Anterior BFS decreased 1mo(P<0.001)postoperatively but remained unchanged until 3mo after SLAK(P>0.05).There was no change in posterior BFS before and after the surgery(P>0.05).Anterior elevation at N5,N3,central,and T5 points and posterior elevation at central and T7 points shifted backward 1mo postoperatively(all P<0.05)and remained stable until 3mo(P>0.05).CONCLUSION:The myopic SLAK combined with CXL is an economical alternative for stabilizing the corneal surface in severe keraoconus.“Pseudoprogression”occurs in the early phase postoperatively,but it is not an indicator of keratoconus progression.
基金financial support from several corporate sponsors.Contributions were made by the National Natural Science Foundation of China(Grant No.32071332)Shenzhen Science and Technology Innovation Project(Grant No.JCYJ20210324095802006)+2 种基金Ningbo Bureau of Science and Technology(Grant No.2023Z187)TransEasy Medical Tech.Co.,Ltd.(Grant No.2021114)Shenzhen University MedTech Innovation Fund(2023YG027).
文摘Aging is a persistent topic of interest,with skin aging as its most visible manifestation,characterized by a reduction in intact collagen and elastic fibers in the dermis.Hyaluronic acid,a vital component of the extracellular matrix present in the skin,has become a mainstream method for skin rejuvenation through injections.However,the rapid degradation of pure hyaluronic acid,combined with insufficient maintenance duration and often limited therapeutic effects,presents significant challenges for injectable treatments.Additionally,low patient compliance due to discomfort from needles penetrating the dermal layer further complicates its use.In this review,we summarize and compare existing interventions for skin aging,focusing on strategies to prolong the degradation cycle of hyaluronic acid,including variations in cross-linking modalities and injection techniques.We conclude that the injection of cross-linked modified hyaluronic acid via microneedles represents a promising approach to extend the degradation cycle,offering valuable insights for current therapeutic strategies.
基金financial support from the National Natural Science Foundation of China[grant number 21878299]。
文摘Polymer binders possess significant potential in alleviating the volume expansion issues of silicon-based anodes,yet remain challenging due to insufficient interfacial interactions with individual components(Si,C,and Cu)of the anode.Herein,we report the synthesis of a stable three-dimensional network structure of the PAA-PEA(polyacrylic acid-polyether amines)polymer binder through intermolecular physicochemical dual cross-linking.By incorporating polar functional groups,the binder molecules not only form strong C-O-Si,N-Si,O=C-O-C,and O=C-O-Cu covalent bonds but also enhance non-covalent interactions with Si,C,and Cu,thereby improving adhesion between the binder and each interface of the anode.Furthermore,weak hydrogen bonds,acting as"sacrificial bonds",dissipate energy and disperse accumulated stress,improving the material flexibility.Due to the high mechanical stability of the framework,which combines both rigidity and flexibility and the coupling effect at the three interfaces,the movement and separation of electrode components are effectively restrained,significantly enhancing the cycling stability of silicon-graphite anodes.The PAA-PEA 2000 electrode exhibits a capacity retention of 78% after 500 cycles at a current density of 0.2 A g^(-1).This work provides insights into the mechanism of binders and guides the design of polymer binders for high-performance Si-based electrodes.
基金supported by the National Key Research and Development Program of China (No. 2022YFB3704700(2022YFB3704702))the National Natural Science Foundation of China (No. 52473096)+1 种基金Major Scientific and Technological Innovation Project of Shandong Province (No. 2021CXGC010901)Taishan Scholar Program
文摘In this study,a novel cost-effective methodology was developed to enhance the gas barrier properties and permselectivity of unfilled natural rubber(NR)/polybutadiene rubber(BR)composites through the construction of a heterogeneous structure using pre-vulcanized powder rubber to replace traditional fillers.The matrix material is composed of a blend of NR and BR,which is widely used in tire manufacturing.By incorporating pre-vulcanized trans-1,4-poly(isoprene-co-butadiene)(TBIR)rubber powder(pVTPR)with different cross-linking densities and contents,significant improvements in the gas barrier properties and CO_(2)permselectivity of the NR/BR/pVTPR composites were observed.The results indicated that compared to NR/BR/TBIR composites prepared through direct blending of NR,BR,and TBIR,the NR/BR/pVTPR composites exhibited markedly superior gas barrier properties.Increasing the cross-linking density of pVTPR resulted in progressive enhancement of the gas barrier properties of the NR/BR/pVTPR composite.For example,the addition of 20 phr pVTPR with a cross-linking density of 346 mol/m^(3)resulted in a 79%improvement in the oxygen barrier property of NR/BR/pVTPR compared to NR/BR,achieving a value of 5.47×10^(-14)cm^(3)·cm·cm^(-2)·s^(-1)·Pa^(-1).Similarly,the nitrogen barrier property improved by 76%compared to NR/BR,reaching 2.4×10^(-14)cm^(3)·cm·cm^(-2)·s^(-1)·Pa^(-1),which is 28%higher than the conventional inner liner material brominated butyl rubber(BIIR,PN2=3.32×10^(-14)cm^(3)·cm·cm^(-2)·s^(-1)·Pa^(-1)).Owing to its low cost,exceptional gas barrier properties,superior adhesion to various tire components,and co-vulcanization capabilities,the NR/BR/pVTPR composite has emerged as a promising alternative to butyl rubber in the inner liner of tires.Furthermore,by fine-tuning the cross-linking density of pVTPR,the high-gas-barrier NR/BR/pVTPR composites also demonstrated remarkable CO_(2)permselectivity,with a CO_(2)/N2 selectivity of 61.4 and a CO_(2)/O_(2)selectivity of 26.12.This innovation provides a novel strategy for CO_(2)capture and separation,with potential applications in future environmental and industrial processes.The multifunctional NR/BR/pVTPR composite,with its superior gas barrier properties and CO_(2)permselectivity,is expected to contribute to the development of safer,greener,and more cost-effective transportation solutions.
基金China Postdoctoral Science Foundation (2023M733451)Dalian Innovation Team in Key Areas(2020RT06)Engineering Research Center for Key Aromatic Compounds and LiaoNing Key Laboratory,Liaoning Provincial Natural Science Foundation (Doctoral Research Start-up Fund 2024-BSBA-37)。
文摘Selective hydrogenation of furfural to furfuryl alcohol is a great challenge in the hydrogenation field due to thermodynamic preference for hydrogenation of C=C over C=O.Herein,a novel Al_(2)O_(3)/C-u hybrid catalyst,composed of N-modified dendritic carbon networks supporting Al_(2)O_(3)nanoparticles,was successfully prepared via carbonizing the freeze-dried gel from spontaneous cross-linking of alginate,Al3+and urea.The obtained carbon-supported Al_(2)O_(3)hybrid catalyst has a high ratio (31%) of Al species in pentahedral-coordinated state.The introduction of urea enhances the surface N content,the ratio of pyrrolic N,and specific surface area of catalyst,leading to improved adsorption capacity of C=O and the accessibility of active sites.In the furfural hydrogenation reaction with isopropyl alcohol as hydrogen donor,Al_(2)O_(3)/C-u catalyst achieved a 90%conversion of furfural with 98.0% selectivity to furfuryl alcohol,outperforming that of commercial γ-Al_(2)O_(3).Moreover,Al_(2)O_(3)/C-u demonstrates excellent catalytic stability in the recycling tests attributed to the synergistic effect of abundant weak Lewis acid sites and the anchoring effect of the carbon network on Al_(2)O_(3)nanoparticles.This work provides an innovative and facile strategy for fabrication of carbon-supported Al_(2)O_(3)hybrid catalysts with rich AlVspecies,serving as a high selective hydrogenation catalyst through MPV reaction route.
基金Funded in part by the National Key Research and Development Program of China(No.2023YFB4006302)。
文摘We successfully incorporated phenyl groups into a small-molecule quaternary ammonium cross-linker and synthesized cross-linked polybenzimidazole membranes via a one-step cross-linking process.Compared with conventional quaternary ammonium-crosslinked benzimidazole membranes,the introduction of phenyl groups significantly increases the free volume within the membrane.After phosphoric acid doping,the benzimidazole membrane with larger free volume retains more phosphoric acid compared to conventional quaternary ammonium-crosslinked membranes,forming an extensive hydrogen-bonding network that effectively enhances its anhydrous proton conductivity.The anhydrous proton conductivity reaches 91 mS·cm^(-1)at 160℃,substantially higher than that of conventional quaternary ammonium-crosslinked membranes with the same mass fraction.Benefiting from the improved conductivity,the membrane electrode assembly exhibits reduced ohmic polarization,achieving a peak power density of 792 mW·cm^(-2)at 160℃.
基金supported by the National Natural Science Foundation of China(Grant Nos.12172045,U2241240,and 12221002)the National Program on Key Basic Research Project,China(Grant No.2019-JCJQ-ZD-308-00).
文摘The curing behavior of composites significantly influences their performance,making it crucial to understand the curing process.This study experimentally measured specific heat capacity,thermal conductivity,glass transition temperature,coefficient of thermal expansion,and cure shrinkage of materials.A simulation model of its curing deformation was established and validated against strain data obtained from fiber Bragg grating experiments.The effects of thickness,heating rate,and cooling rate on the curing temperature field and residual stress field during the molding of thick-section composite plates were analyzed.
文摘The development of polymer nanoparticle composites with enhanced thermal and antibacterial properties is essential for next-generation biomedical materials.However,conventional polymers often exhibit limited bioactivity and poor resistance to degradation,restricting their functional applications.The novelty of this study involves the combination of the bio-derived cross-linker 2,5-bis(aminomethyl)furan(BAF)into poly(methylmethacrylate)PMMA to form a cross-linked network incorporated with various ratios of ZnO nanoparticles(ZnO NPs),resulting in improved biological and thermal properties.The surface morphologies,material crystallinity,and thermal degradation properties of the synthesized BAF-PMMA/ZnO were investigated using Scanning Electron microscopy(SEM),Energy-Dispersive X-ray spectroscopy(EDX),X-ray diffraction(XRD),andThermogravimetric characterization technique(TGA),respectively.The prepared BAF-PMMA/ZnO nanocomposites showed an enhancement in the crystallinity after increasing the ratio of ZnO NPs compared to the amorphous cross-linked BAF-PMMA polymer.The thermal stability of nanocomposites was significantly enhanced after the introduction of ZnO NPs into crosslinked BAF-PMMA polymer.The resultant nanocomposites BAF-PMMA/ZnO were examined as antibacterial agents against the Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)bacterial strains.The results showed that most BAF-PMMA/ZnO nanocomposites have antibacterial activity against both bacterial species compared to the pure cross-linked BAF-PMMA polymer.The BAF-PMMA/ZnO 10 wt.%sample shows the highest inhibition zone of(16.3±0.33)against E.coli.These outcomes demonstrate that such nanocomposites offer a viable pathway towardmultipurpose biomaterials with exceptional structural and biological features.
文摘In order to determine the best loading density of tobacco leaf with cage clamp in bulk-curing barns, a curing test was conducted on middle-part tobacco leaves. The results showed that for good appearance quality of cured tobacco, the loading density at 59.52 kg/m2 （4 000 kg/barn） was the best, fol owed by 66.96 kg/m2 （4 500 kg/barn） and 74.40 kg/m2 （5 000 kg/barn）. As leaf loading density increased, the contents of leaf nicotine and total nitrogen increased, sugar content had smal changes, the ratio of sugar to nicotine decreased and tended to be balanced and the content of neutral aroma substances was decreasing, but the difference among treatments was not significant. With the increase of loading density, the sensory quality of cured leaf was better. When leaf loading density was 66.96 kg/m2 （4 500 kg/barn）, apperance quality of cured leaf improved considerably, with prominent aro-ma. Therefore, the best loading density of tobacco leaf in cage clamp of bulk-curing barn would be 66.96 kg/m2 （4 500 kg/barn） .
基金Supported by Shanghai Tobacco(Group)Corporation(2011-00600)~~
文摘CuItivars K326, Yunyan 87 and Guiyan 4 were used to investigate the curing characteristics and suitabIe harvest maturity of fresh fIue-cured tobacco Ieaves in Ankang tobacco growing areas. ResuIts indicated that the water Ioss of K326 was sIow,and the Ieaves were resistant to curing and reIative easiIy to cure. The water Ioss of Yunyan 87 and Guiyan 4 were quick, and the Ieaves with normal resistance to curing were reIative difficuIt to cure. For Guiyan 4, the shrinkage of CM1 maturity was the Iargest. For K326 and Yunyan 87, the shrinkages of CM2 maturity were the Iargest whiIe the shrinkage of CM1 maturity was the Iowest, but the difference did not reach statistical significance. The proportion of top-middIe-grade tobacco Ieaves and average price for K326 were the highest with XM2, CM2 and BM2 maturity, and for Yunyan 87 were XM1, CM3 and BM2 maturity. For K326, Ieaves with XM2, CM2 and BM2 maturity showed the balanced chemical components and the best smoking quality.
基金Supported by China Tobacco Yunnan Indutrial Co.Ltd Scientific Program(2010YL02)~~
文摘[Objective] The aim was to research effects of bamboo split curing method and steely barn curing method on quality of yellow sun-cured tobacco, providing scientific references for optimization of curing technology of yellow sun-cured tobacco. [method] The tobaccos were divided into two groups treated with two methods and the related indices of treated tobaccos were then measured to evaluate effects of curing methods on quality of yellow sun-cured tobacco. [Result] Tobaccos treated with two methods were all dominated by reddish yellow and yellow; exterior quality differed little. In detail, total sugar and reducing sugar in an average level in three locations were all higher with method A than those with method B, but nicotine and total N were lower; comprehensive chemical components in group with method B proved more appropriate with higher K. In addition, sensory qualities of leaves in moderate and bottom locations were better with method B compared with method A; sensory quality of top leaves was better; comprehensive sensory quality of leaves treated with method B proved better. On the other hand, cost for method A was 2.82 times of method B; the area of sun-curing field was 3.27 times and manage- ment work was 1.77 times, which indicated that method B is low-cost and time-saving, which would be a guarantee of tobacco quality. [Conclusion] The research provides scientific references for rational use of tobacco resources and optimization of sun-curing technology.
文摘[Objective] This study was conducted to compare the aroma quality of up-per leaves of K326 flue-cured in different barns, and provide theoretical references for the development and optimization of bulk curing barn and the supporting tech-niques. [Method] The upper leaves of K326 were flue-cured in a commonness barn, a four-shelf bulk curing barn and a three-shelf bulk curing barn separately, and then the contents of aroma components and taste quality indices of the finished leaves were measured and compared. [Result] The contents of total aroma components, chromoplast pigment degradation products, phenylalanine aroma components and neophytadiene showed no significant differences in the leaves flue-cured in four-shelf bulk curing barn and commonness barn, but were significantly or very significantly higher than those in the leaves flue-cured in three-shelf bulk curing barn. The con-tents of carotenoid degradation products, Mail ard reaction products, cembranes aro-ma components and total aroma components （except neophytadiene） showed no significant difference among the three treatments. The results of sensory evaluation revealed that the sensory taste of the leaves flue-cured in four-shelf bulk curing barn was the best, as the finished leaves had rich, delicate aroma, comfortable and clean aftertaste. The leaves flue-cured in commonness barn was better than those flue-cured in three-shelf bulk curing barn in aroma quality, amount and aftertaste. [Conclusion] The four-shelf bulk curing barn had a large volume for tobacco leaf processing, but a similar baking environment to the commonness barn, which is conducive to the formation and accumulation of aroma components, so the finished leaves had similar appearance and quality with those flue-cured in commonness barn. The upper flue-cured leaves in three-shelf bulk curing bran had poorer quality than those flue-cured in the other two barns.
基金supported by the National 863 Plan(No.2006AA03A209)New Century Excellent Talent Plan (No.NECT-05-0660) from Ministry of EducationDefense Basic Research Item(No.D1420061057)
文摘A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A（DGEBA） and flexibleα,ω-bisamino（n-alkylene）phenyl terminated poly（ethylene glycol）.The influences of the n-alkylene inserted in aminophenyl of flexible amino-terminated polythers（ATPE） on the mechanical properties,fractographs and curing kinetics of the ATPE-DGEBA cured products were studied.The results show that the insertion of n-alkylene group into the aminophenyl group of the ATPE,on one hand,can significantly increase the strain relaxation rate and decrease glass transition temperature of the ATPE-DGEBA cured products,resulting in slight decrease of the Young’s modulus and tensile strength,and significant increase of the toughness and elongation of the ATPE-DGEBA cured products.On the other hand,it can remarkably enhance the reactivity of amine with epoxy,much accelerating the curing rate of the ATPE-DGEBA systems.The activation energy of DGEBA cured by BAPTPE,BAMPTPE and BAEPTPE was 53.1,28.5 and 25.4 kJ·mol;,respectively.The as-obtained ATPE-DGEBA cured products are homogeneous, transparent,and show excellent mechanical properties including tensile strength and toughness.Thus they are promising to have important applications in structure adhesives,casting bulk materials,functional coatings,cryogenic engineering, damping and sound absorbing materials.
文摘The cure kinetics of diglycidyl ether of bisphenol A （DGEBA） with hyperbranched poly （3-hydroxyphenyl） phosphate（HHPP） as the curing agent was investigated by means of non-isothermal differential scanning calorimetry （DSC） at various heating rates. The results were compared with the corresponding results by using 1,3-dihydroxybenzene（DHB） as a model compound. The results show that HHPP can enhance the cure reaction of DGEBA, resulting in the decrease of the peak temperature of the curing curve as well as the decrease of the activation energy because of the flexible --P--O-- groups in the backbone of HHPP. However, both the activation energy of the cured polymer and the peak temperature of the curing curve are increased with DHB as a curing agent. The cure kinetics of the DGEBA/HHPP system was calculated by using the isoconversional method given by Malek. It was found that the two-parameter autocatalytic model（Sestak-Berggren equation） is the most adequate one to describe the cure kinetics of the studied System at various heating rates. The obtained non-isothermal DSC curves from the experimental data show the results being accordant with those theoretically calculated.
