Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagati...Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.展开更多
Medium-high maturity continental shale oil is one of the hydrocarbon resources with the most potential for successful development in China.Nevertheless,the unique geological conditions of a multi-lithologic superposit...Medium-high maturity continental shale oil is one of the hydrocarbon resources with the most potential for successful development in China.Nevertheless,the unique geological conditions of a multi-lithologic superposition shield the vertical propagation of hydraulic fractures and limit the longitudinal reconstruction in reservoirs,posing a great challenge for large-scale volumetric fracturing.Radial wellbore crosslayer fracturing,which transforms the interaction between the hydraulic fractures and lithologic interface into longitudinal multilayer competitive initiation,could provide a potential solution for this engineering challenge.To determine the longitudinal propagation behaviors of fractures guided by radial wellbores,true triaxial fracturing experiments were performed on multilayer shale-sandstone samples,with a focus on the injection pressure response,fracture morphology,and cross-layer pattern.The effects of the radial borehole length L,vertical stress difference K_(v),injection rate Q,and viscosity m of the fracturing fluid were analyzed.The results indicate that radial wellbores can greatly facilitate fracture initiation and cross-layer propagation.Unlike conventional hydraulic fracturing,there are two distinct fracture propagation patterns in radial wellbore fracturing:cross-layering and skip-layering.The fracture height guided by a radial wellbore is positively correlated with K_(v),Q,and m.Increasing these parameters causes a shift in the fracture initiation from a single root to an asynchronous root/toe end and can improve the cross-layer propagation capacity.Critical parameter thresholds exist for fracture propagation through and across interlayers under the guidance of radial boreholes.A parameter combination of critical cross-layering/skip-layering or alternating displacement/viscosity is recommended to simultaneously improve the fracture height and degree of lateral activation.The degree of correlation of different parameters with the vertical fracture height can be written as L>Q/m>K_(v).Increasing the radial wellbore length can effectively facilitate fracture cross-/skip-layer propagation and reduce the critical threshold of injection parameters,which is conducive to maximizing the stimulated reservoir volume.展开更多
A new scheme of super-resolution optical fluctuation imaging(SOFI)is proposed to broaden its application in the high-order cumulant reconstruction by optimizing blinking characteristics,eliminating noise in raw data a...A new scheme of super-resolution optical fluctuation imaging(SOFI)is proposed to broaden its application in the high-order cumulant reconstruction by optimizing blinking characteristics,eliminating noise in raw data and applying multi-resolution analysis in cumulant reconstruction.A motor-driven rotating mask optical modulation system is designed to adjust the excitation lightfield and allows for fast deployment.Active-modulated fluorescence fluctuation superresolution microscopy with multi-resolution analysis(AMF-MRA-SOFI)demonstrates enhanced resolution ability and reconstruction quality in experiments performed on sample of conventional dyes,achieving a resolution of 100 nm in the fourth order compared to conventional SOFI reconstruction.Furthermore,our approach combining expansion super-resolution achieved a resolution at-57 nm.展开更多
A multi-resolution smoothed particle hydrodynamics and peridynamics(SPH-PD)coupling model is proposed in this study for simulating the fracture characteristics of ice plates exposed to underwater blast loads.The SPH m...A multi-resolution smoothed particle hydrodynamics and peridynamics(SPH-PD)coupling model is proposed in this study for simulating the fracture characteristics of ice plates exposed to underwater blast loads.The SPH model employs a volume adaptive scheme(VAS)and a multi-resolution particle technique to accurately simulate explosive charge detonation and shock wave propagation.This approach addresses numerical challenges from charge expansion and significant size disparity between the charge and the fluid particles.The model captures the full underwater explosion process,covering both the shock wave phase and the bubble expansion stage,by applying appropriate equations of state for each respective phase.To analyze ice plate damage and crack propagation influenced by temperature changes,an ordinary state-based PD(OSB-PD)formulation with coupled mechanical and thermodynamic models is used.Numerical results show that the proposed coupling method demonstrates good agreement with reference solutions and experimental data.展开更多
The orthogonal frequency division multiple access( OFDMA) based communication system has been considered as the main trend of next-Generation communication system. But the existing resource allocation algorithm design...The orthogonal frequency division multiple access( OFDMA) based communication system has been considered as the main trend of next-Generation communication system. But the existing resource allocation algorithm designed for such system is always with high complexity thus hard to be realized. To solve such problem with the constraints of spectrum efficiency and buffer state,a novel cross-layer resource allocation algorithm( RAA) is proposed in this paper. The goal of our RAA is to maximize the system throughput while satisfying several practical constraints,such as fairness among services,head of line( Ho L) delay and diverse quality of service( Qo S) requirements. Due to these constraints,finding the optimal solution becomes a NPhard problem. Therefore in this paper a novel method to solve such problem with acceptable complexity is proposed within following steps: firstly,based on the link state we formulate the ideal subchannel allocation strategy as a convex optimization problem,which can be efficiently solved by our proposed lagrange multiplier technique subchannel allocation( LMTSA) algorithm; secondly,according to the obtained channel allocation matrix,a power allocation algorithm based on the water-filling power allocation( WPA) idea is deployed to get the optimal power allocation matrix combining with adaptive modulation and coding( AMC); finally,through a greedy algorithm,the ultimate subchannel and power allocation matrix can be obtained based on iterative method. The simulation results illustrate that we can achieve the higher throughput and better Qo S performance than the widely-used maximum throughput( MT) algorithm and round robin( RR) algorithm.展开更多
In this study, we used the multi-resolution graph-based clustering （MRGC） method for determining the electrofacies （EF） and lithofacies （LF） from well log data obtained from the intraplatform bank gas fields loc...In this study, we used the multi-resolution graph-based clustering （MRGC） method for determining the electrofacies （EF） and lithofacies （LF） from well log data obtained from the intraplatform bank gas fields located in the Amu Darya Basin. The MRGC could automatically determine the optimal number of clusters without prior knowledge about the structure or cluster numbers of the analyzed data set and allowed the users to control the level of detail actually needed to define the EF. Based on the LF identification and successful EF calibration using core data, an MRGC EF partition model including five clusters and a quantitative LF interpretation chart were constructed. The EF clusters 1 to 5 were interpreted as lagoon, anhydrite flat, interbank, low-energy bank, and high-energy bank, and the coincidence rate in the cored interval could reach 85%. We concluded that the MRGC could be accurately applied to predict the LF in non-cored but logged wells. Therefore, continuous EF clusters were partitioned and corresponding LF were characteristics ＆different LF were analyzed interpreted, and the distribution and petrophysical in the framework of sequence stratigraphy.展开更多
Timely crop acreage and distribution information are the basic data which drive many agriculture related applications.For identifying crop types based on remote sensing,methods using only a single image type have sign...Timely crop acreage and distribution information are the basic data which drive many agriculture related applications.For identifying crop types based on remote sensing,methods using only a single image type have significant limitations.Current research that integrates fine and coarser spatial resolution images,using techniques such as unmixing methods,regression models,and others,usually results in coarse resolution abundance without sufficient detail within pixels,and limited attention has been paid to the spatial relationship between the pixels from these two kinds of images.Here we propose a new solution to identify winter wheat by integrating spectral and temporal information derived from multi-resolution remote sensing data and determine the spatial distribution of sub-pixels within the coarse resolution pixels.Firstly,the membership of pixels which belong to winter wheat is calculated using a 25-m resolution resampled Landsat Thematic Mapper(TM)image based on the Bayesian equation.Then,the winter wheat abundance(acreage fraction in a pixel)is assessed by using a multiple regression model based on the unique temporal change features from moderate resolution imaging spectroradiometer(MODIS)time series data.Finally,winter wheat is identified by the proposed Abundance-Membership(AM)model based on the spatial relationship between the two types of pixels.Specifically,winter wheat is identified by comparing the spatially corresponding 10×10 membership pixels of each abundance pixel.In other words,this method takes advantage of the relative size of membership in a local space,rather than the absolute size in the entire study area.This method is tested in the major agricultural area of Yiluo Basin,China,and the results show that acreage accuracy(Aa)is 93.01%and sampling accuracy(As)is 91.40%.Confusion matrix shows that overall accuracy(OA)is 91.4%and the kappa coefficient(Kappa)is 0.755.These values are significantly improved compared to the traditional Maximum Likelihood classification(MLC)and Random Forest classification(RFC)which rely on spectral features.The results demonstrate that the identification accuracy can be improved by integrating spectral and temporal information.Since the identification of winter wheat is performed in the space corresponding to each MODIS pixel,the influence of differences of environmental conditions is greatly reduced.This advantage allows the proposed method to be effectively applied in other places.展开更多
Wireless Mesh Networks （WMNs） are vulnerable to various security threats because of their special infrastructure and communication mode, wherein insider attacks are the most challenging issue. To address this proble...Wireless Mesh Networks （WMNs） are vulnerable to various security threats because of their special infrastructure and communication mode, wherein insider attacks are the most challenging issue. To address this problem and protect innocent users from malicious attacks, it is important to encourage cooperation and deter malicious behaviors. Reputation systems constitute a major category of techniques used for managing trust in distributed networks, and they are effective in characterizing and quantifying a node＇s behavior for WMNs. However, conventional layered reputation mechanisms ignore several key factors of reputation in other layers; therefore, they cannot provide optimal performance and accurate malicious node identification and isolation for WMNs. In this paper, we propose a novel dynamic reputation mechanism, SLCRM, which couples reputation systems with a cross-layer design and node-security-rating classification techniques to dynamically detect and restrict insider attacks. Simulation results show that in terms of network throughput, packet delivery ratio, malicious nodes＇ identification, and success rates, SI_CRM imple- ments security protection against insider attacks in a more dynamic, effective, and efficient manner than the subjective logic and uncertainty-based reputation model and the familiarity-based reputation model.展开更多
Mixture model based image segmentation method, which assumes that image pixels are independent and do not consider the position relationship between pixels, is not robust to noise and usually leads to misclassificatio...Mixture model based image segmentation method, which assumes that image pixels are independent and do not consider the position relationship between pixels, is not robust to noise and usually leads to misclassification. A new segmentation method, called multi-resolution Ganssian mixture model method, is proposed. First, an image pyramid is constructed and son-father link relationship is built between each level of pyramid. Then the mixture model segmentation method is applied to the top level. The segmentation result on the top level is passed top-down to the bottom level according to the son-father link relationship between levels. The proposed method considers not only local but also global information of image, it overcomes the effect of noise and can obtain better segmentation result. Experimental result demonstrates its effectiveness.展开更多
To improve the robustness of the Low Earth Orbit(LEO) satellites networks and realise load balancing, a Cross-layer design and Ant-colony optimization based Load-balancing routing algorithm for LEO Satellite Networks(...To improve the robustness of the Low Earth Orbit(LEO) satellites networks and realise load balancing, a Cross-layer design and Ant-colony optimization based Load-balancing routing algorithm for LEO Satellite Networks(CAL-LSN) is proposed in this paper. In CALLSN, mobile agents are used to gather routing information actively. CAL-LSN can utilise the information of the physical layer to make routing decision during the route construction phase. In order to achieve load balancing, CALLSN makes use of a multi-objective optimization model. Meanwhile, how to take the value of some key parameters is discussed while designing the algorithm so as to improve the reliability. The performance is measured by the packet delivery rate, the end-to-end delay, the link utilization and delay jitter. Simulation results show that CAL-LSN performs well in balancing traffic load and increasing the packet delivery rate. Meanwhile, the end-to-end delay and delay jitter performance can meet the requirement of video transmission.展开更多
Huge calculation burden and difficulty in convergence are the two central conundrums of nonlinear topology optimization(NTO).To this end,a multi-resolution nonlinear topology optimization(MR-NTO)method is proposed bas...Huge calculation burden and difficulty in convergence are the two central conundrums of nonlinear topology optimization(NTO).To this end,a multi-resolution nonlinear topology optimization(MR-NTO)method is proposed based on the multiresolution design strategy(MRDS)and the additive hyperelasticity technique(AHT),taking into account the geometric nonlinearity and material nonlinearity.The MR-NTO strategy is established in the framework of the solid isotropic material with penalization(SIMP)method,while the Neo-Hookean hyperelastic material model characterizes the material nonlinearity.The coarse analysis grid is employed for finite element(FE)calculation,and the fine material grid is applied to describe the material configuration.To alleviate the convergence problem and reduce sensitivity calculation complexity,the software ANSYS coupled with AHT is utilized to perform the nonlinear FE calculation.A strategy for redistributing strain energy is proposed during the sensitivity analysis,i.e.,transforming the strain energy of the analysis element into that of the material element,including Neo-Hooken and second-order Yeoh material.Numerical examples highlight three distinct advantages of the proposed method,i.e.,it can(1)significantly improve the computational efficiency,(2)make up for the shortcoming that NTO based on AHT may have difficulty in convergence when solving the NTO problem,especially for 3D problems,(3)successfully cope with high-resolution 3D complex NTO problems on a personal computer.展开更多
Since most ad hoc mobile devices today operate on batteries,the power consumption becomes an important issue.This paper proposes a cross-layer design of energy-aware ad hoc on-demand distance vector(CEAODV) routing pr...Since most ad hoc mobile devices today operate on batteries,the power consumption becomes an important issue.This paper proposes a cross-layer design of energy-aware ad hoc on-demand distance vector(CEAODV) routing protocol which adopts cross-layer mechanism and energy-aware metric to improve AODV routing protocol to reduce the energy consumption and then prolong the life of the whole network.In CEAODV,the link layer and the routing layer work together to choose the optimized transmission power for nodes and the route for packets.The link layer provides the energy consumption information for the routing layer and the routing layer chooses route accordingly and conversely controls the link layer to adjust the transmission power.The simulation result shows that CEAODV can outperform AODV to save more energy.It can reduce the consumed energy by about 8%over traditional energy-aware algorithm.And the performance is better when the traffic load is higher in the network.展开更多
Multi-sensor image registration has been widely used in remote sensing and medical image field, but registration performance is degenerated when heterogeneous images are involved. An image registration method based on...Multi-sensor image registration has been widely used in remote sensing and medical image field, but registration performance is degenerated when heterogeneous images are involved. An image registration method based on multi-resolution shape analysis is proposed in this paper, to deal with the problem that the shape of similar objects is always invariant. The contours of shapes are first detected as visual features using an extended contour search algorithm in order to reduce effects of noise, and the multi-resolution shape descriptor is constructed through Fourier curvature representation of the contour’s chain code. Then a minimum distance function is used to judge the similarity between two contours. To avoid the effect of different resolution and intensity distribution, suitable resolution of each image is selected by maximizing the consistency of its pyramid shapes. Finally, the transformation parameters are estimated based on the matched control-point pairs which are the centers of gravity of the closed contours. Multi-sensor Landsat TM imagery and infrared imagery have been used as experimental data for comparison with the classical contour-based registration. Our results have been shown to be superior to the classical ones.展开更多
According to large coverage of satellites, there are various channel states in a satellite broadcasting network. In order to introduce an efficient rateless transmission method to satellite multimedia broadcasting/mul...According to large coverage of satellites, there are various channel states in a satellite broadcasting network. In order to introduce an efficient rateless transmission method to satellite multimedia broadcasting/multicast services with finite-length packets, a cross-layer packet transmission method is proposed with Luby transform （LT） codes for efficiency in the network layer and low density parity check （LDPC） codes for reliability in the physical layer jointly. The codewords generated from an LT encoder are divided into finite-length packets, which are encoded by an LDPC encoder subsequently. Based on noise and fading effects of satellite channels, the LT packets received from an LDPC decoder either have no error or are marked as erased, which can be mod- eled as a binary erasure channels （BECs）. By theoretical analysis on LT parameters and LDPC parameters, the relationships between LDPC code rates in the physical layer and LT codes word lengths in the network layer are investigated. With tradeoffs between the LT codes word lengths and the LDPC code rates, optimized cross-layer solutions are achieved with a binary search algorithm. Verified by simulations, the proposed solution for cross-layer parameters design can provide the best transmission mode according to satellite states, so as to improve throughput performance for satellite multimedia transmission.展开更多
Sonar images have complex background, low contrast, and deteriorative edges; these characteristics make it difficult for researchers to dispose the sonar objects. The multi-resolution analysis represents the signals i...Sonar images have complex background, low contrast, and deteriorative edges; these characteristics make it difficult for researchers to dispose the sonar objects. The multi-resolution analysis represents the signals in different scales efficiently, which is widely used in image processing. Wavelets are successful in disposing point discontinuities in one dimension, but not in two dimensions. The finite Ridgelet transform （FRIT） deals efficiently with the singularity in high dimension. It presents three improved denoising approaches, which are based on FRIT and used in the sonar image disposal technique. By experiment and comparison with traditional methods, these approaches not only suppress the artifacts, but also obtain good effect in edge keeping and SNR of the sonar image denoising.展开更多
Aiming at the higher bit-rate occupation of motion vector encoding and more time load of full-searching strategies, a multi-resolution motion estimation and compensation algorithm based on adjacent prediction of frame...Aiming at the higher bit-rate occupation of motion vector encoding and more time load of full-searching strategies, a multi-resolution motion estimation and compensation algorithm based on adjacent prediction of frame difference was proposed.Differential motion detection was employed to image sequences and proper threshold was adopted to identify the connected region.Then the motion region was extracted to carry out motion estimation and motion compensation on it.The experiment results show that the encoding efficiency of motion vector is promoted, the complexity of motion estimation is reduced and the quality of the reconstruction image at the same bit-rate as Multi-Resolution Motion Estimation(MRME) is improved.展开更多
Triaxial fracturing modeling experiments were carried out on whole diameter shale cores from different layers of Shahejie Formation in the Dongpu sag,Bohai Bay Basin to find out the vertical propagation shapes of hydr...Triaxial fracturing modeling experiments were carried out on whole diameter shale cores from different layers of Shahejie Formation in the Dongpu sag,Bohai Bay Basin to find out the vertical propagation shapes of hydraulic fractures in different reservoirs.A numerical simulation method of inserting global cohesive elements was adopted to build a pseudo-three-dimension fracture propagation model for multiple shale oil reservoirs considering interface strength,perforation location,and pump rate to research the features of hydraulic fracture(HF)penetrating through layers.The hydraulic fracture propagates in a cross pattern in tight sandstone layers,in a straight line in sandstone layers with natural fractures,forms ladder fracture in shale layers with beddings.The hydraulic fracture propagates in a stripe shape vertically in both sandstone and shale layers,but it spreads in the plane in shale layers after connecting beddings.Restricted by beddings,the hydraulic fractures in shale layers are smaller in height than those in sandstone layers.When a sandstone layer and a shale layer are fractured at the same time,the fracture extends the most in height after the two layers are connected.Perforating at positions where the sandstone-shale interface is higher in strength and increasing the pumping rate can enhance the fracture height,thus achieving the goal of increasing the production by cross-layer fracturing in multiple shale oil layers.展开更多
The density field around a vortex generator （VG） in supersonic flow is studied with a nanoparticle-based planar laser scattering （NPLS） method. Based on the calibration, i.e., the density distribution of the super...The density field around a vortex generator （VG） in supersonic flow is studied with a nanoparticle-based planar laser scattering （NPLS） method. Based on the calibration, i.e., the density distribution of the supersonic flow around a wedge, the density field of a supersonic VG is measured. According to movement characteristics of coherent structure in VG’s flow fields and the basic concepts of wavelet, the density fluctuating signals and multi-resolution characteristics of density field images are studied. The multi-resolution characteristics of density fluctuation can be analyzed with wavelet transformation of NPLS images. The wavelet approximate coefficients of density fluctuating signals exhibit their characteristics at different scales, and the corresponding detail coefficients show the difference of diverse layer smooth approximation in some way. Based on 2D wavelet decomposition and reconstruction of density field images, the approximate and detail signals at different scales are studied, and the coherent structures at different scales are extracted and analyzed.展开更多
We propose a high-performance path planning algorithm for automatic target tracking in the applications of real-time simulation and visualization of large-scale terrain datasets, with a large number of moving objects ...We propose a high-performance path planning algorithm for automatic target tracking in the applications of real-time simulation and visualization of large-scale terrain datasets, with a large number of moving objects （such as vehicles） tracking multiple moving targets. By using a modified Dijkstra＇s algorithm, an optimal path between each vehicle-target pair over a weighted grid-presented terrain is computed and updated to eliminate the problem of local minima and losing of tracking. Then, a dynamic path re-planning strategy using multi-resolution representation of a dynamic updating region is proposed to achieve high-performance by trading-off precision for efficiency, while guaranteeing accuracy. Primary experimental results showed that our algorithm successfully achieved l0 to 96 frames per second interactive path-replanning rates during a terrain simulation scenario with 10 to 100 vehicles and multiple moving targets.展开更多
The performance of uplink distributed massive multiple-input multiple-output(MIMO)systems with crosslayer design(CLD) is investigated over Rayleigh fading channel, which combines the discrete rate adaptive modulation ...The performance of uplink distributed massive multiple-input multiple-output(MIMO)systems with crosslayer design(CLD) is investigated over Rayleigh fading channel, which combines the discrete rate adaptive modulation with truncated automatic repeat request. By means of the performance analysis, the closed-form expressions of average packet error rate(APER)and overall average spectral efficiency(ASE)of distributed massive MIMO systems with CLD are derived based on the conditional probability density function of each user’s approximate effective signal-to-noise ratio(SNR)and the switching thresholds under the target packet loss rate(PLR)constraint.With these results,using the approximation of complementary error functions,the approximate APER and overall ASE are also deduced. Simulation results illustrate that the obtained theoretical ASE and APER can match the corresponding simulations well. Besides,the target PLR requirement is satisfied,and the distributed massive MIMO systems offer an obvious performance gain over the co-located massive MIMO systems.展开更多
文摘Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.
基金supported by the National Natural Science Foun-dation of China(52421002,U24B6001,52204019,and 52192624)the Open Foundation of the Shanxi Key Laboratory of Carbon Dioxide Sequestration and Enhanced Oil Recovery。
文摘Medium-high maturity continental shale oil is one of the hydrocarbon resources with the most potential for successful development in China.Nevertheless,the unique geological conditions of a multi-lithologic superposition shield the vertical propagation of hydraulic fractures and limit the longitudinal reconstruction in reservoirs,posing a great challenge for large-scale volumetric fracturing.Radial wellbore crosslayer fracturing,which transforms the interaction between the hydraulic fractures and lithologic interface into longitudinal multilayer competitive initiation,could provide a potential solution for this engineering challenge.To determine the longitudinal propagation behaviors of fractures guided by radial wellbores,true triaxial fracturing experiments were performed on multilayer shale-sandstone samples,with a focus on the injection pressure response,fracture morphology,and cross-layer pattern.The effects of the radial borehole length L,vertical stress difference K_(v),injection rate Q,and viscosity m of the fracturing fluid were analyzed.The results indicate that radial wellbores can greatly facilitate fracture initiation and cross-layer propagation.Unlike conventional hydraulic fracturing,there are two distinct fracture propagation patterns in radial wellbore fracturing:cross-layering and skip-layering.The fracture height guided by a radial wellbore is positively correlated with K_(v),Q,and m.Increasing these parameters causes a shift in the fracture initiation from a single root to an asynchronous root/toe end and can improve the cross-layer propagation capacity.Critical parameter thresholds exist for fracture propagation through and across interlayers under the guidance of radial boreholes.A parameter combination of critical cross-layering/skip-layering or alternating displacement/viscosity is recommended to simultaneously improve the fracture height and degree of lateral activation.The degree of correlation of different parameters with the vertical fracture height can be written as L>Q/m>K_(v).Increasing the radial wellbore length can effectively facilitate fracture cross-/skip-layer propagation and reduce the critical threshold of injection parameters,which is conducive to maximizing the stimulated reservoir volume.
基金supported by the National Natural Science Foundation of China(62175034,62175036,32271510)the National Key R&D Program of China(2021YFF0502900)+2 种基金the Science and Technology Research Program of Shanghai(Grant No.19DZ2282100)the Shanghai Key Laboratory of Metasurfaces for Light Manipulation(23dz2260100)the Shanghai Engineering Technology Research Center of Hair Medicine(19DZ2250500).
文摘A new scheme of super-resolution optical fluctuation imaging(SOFI)is proposed to broaden its application in the high-order cumulant reconstruction by optimizing blinking characteristics,eliminating noise in raw data and applying multi-resolution analysis in cumulant reconstruction.A motor-driven rotating mask optical modulation system is designed to adjust the excitation lightfield and allows for fast deployment.Active-modulated fluorescence fluctuation superresolution microscopy with multi-resolution analysis(AMF-MRA-SOFI)demonstrates enhanced resolution ability and reconstruction quality in experiments performed on sample of conventional dyes,achieving a resolution of 100 nm in the fourth order compared to conventional SOFI reconstruction.Furthermore,our approach combining expansion super-resolution achieved a resolution at-57 nm.
基金partially funded by the National Natural Science Foundation of China(Grant No.52171329)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2024B1515020107)+1 种基金the Young Elite Scientist Sponsorship Program by CAST(Grant No.2022QNRC001)Characteristic Innovation Project of Universities in Guangdong Province(Grant No.2023KTSCX005).
文摘A multi-resolution smoothed particle hydrodynamics and peridynamics(SPH-PD)coupling model is proposed in this study for simulating the fracture characteristics of ice plates exposed to underwater blast loads.The SPH model employs a volume adaptive scheme(VAS)and a multi-resolution particle technique to accurately simulate explosive charge detonation and shock wave propagation.This approach addresses numerical challenges from charge expansion and significant size disparity between the charge and the fluid particles.The model captures the full underwater explosion process,covering both the shock wave phase and the bubble expansion stage,by applying appropriate equations of state for each respective phase.To analyze ice plate damage and crack propagation influenced by temperature changes,an ordinary state-based PD(OSB-PD)formulation with coupled mechanical and thermodynamic models is used.Numerical results show that the proposed coupling method demonstrates good agreement with reference solutions and experimental data.
基金Sponsored by the National Natural Science Foundation of China(Grant No.61302080)the National High Technology Research and Development Program of China(Grant No.2014AA01A705)
文摘The orthogonal frequency division multiple access( OFDMA) based communication system has been considered as the main trend of next-Generation communication system. But the existing resource allocation algorithm designed for such system is always with high complexity thus hard to be realized. To solve such problem with the constraints of spectrum efficiency and buffer state,a novel cross-layer resource allocation algorithm( RAA) is proposed in this paper. The goal of our RAA is to maximize the system throughput while satisfying several practical constraints,such as fairness among services,head of line( Ho L) delay and diverse quality of service( Qo S) requirements. Due to these constraints,finding the optimal solution becomes a NPhard problem. Therefore in this paper a novel method to solve such problem with acceptable complexity is proposed within following steps: firstly,based on the link state we formulate the ideal subchannel allocation strategy as a convex optimization problem,which can be efficiently solved by our proposed lagrange multiplier technique subchannel allocation( LMTSA) algorithm; secondly,according to the obtained channel allocation matrix,a power allocation algorithm based on the water-filling power allocation( WPA) idea is deployed to get the optimal power allocation matrix combining with adaptive modulation and coding( AMC); finally,through a greedy algorithm,the ultimate subchannel and power allocation matrix can be obtained based on iterative method. The simulation results illustrate that we can achieve the higher throughput and better Qo S performance than the widely-used maximum throughput( MT) algorithm and round robin( RR) algorithm.
基金supported by the National Science and Technology Major Project of China(No.2011ZX05029-003)CNPC Science Research and Technology Development Project,China(No.2013D-0904)
文摘In this study, we used the multi-resolution graph-based clustering （MRGC） method for determining the electrofacies （EF） and lithofacies （LF） from well log data obtained from the intraplatform bank gas fields located in the Amu Darya Basin. The MRGC could automatically determine the optimal number of clusters without prior knowledge about the structure or cluster numbers of the analyzed data set and allowed the users to control the level of detail actually needed to define the EF. Based on the LF identification and successful EF calibration using core data, an MRGC EF partition model including five clusters and a quantitative LF interpretation chart were constructed. The EF clusters 1 to 5 were interpreted as lagoon, anhydrite flat, interbank, low-energy bank, and high-energy bank, and the coincidence rate in the cored interval could reach 85%. We concluded that the MRGC could be accurately applied to predict the LF in non-cored but logged wells. Therefore, continuous EF clusters were partitioned and corresponding LF were characteristics ＆different LF were analyzed interpreted, and the distribution and petrophysical in the framework of sequence stratigraphy.
基金the financial support provided by the National Science & Technology Infrastructure Construction Project of China (2005DKA32300)the Key Science and Technology Project of Henan Province, China (152102110047)+2 种基金the Major Research Project of the Ministry of Education, China(16JJD770019)the Major Scientific and Technological Special Project of Henan Province, China (121100111300)the Cooperation Base Open Fund of the Key Laboratory of Geospatial Technology for the Middle and Lower Yellow River regions and CPGIS (JOF 201602)
文摘Timely crop acreage and distribution information are the basic data which drive many agriculture related applications.For identifying crop types based on remote sensing,methods using only a single image type have significant limitations.Current research that integrates fine and coarser spatial resolution images,using techniques such as unmixing methods,regression models,and others,usually results in coarse resolution abundance without sufficient detail within pixels,and limited attention has been paid to the spatial relationship between the pixels from these two kinds of images.Here we propose a new solution to identify winter wheat by integrating spectral and temporal information derived from multi-resolution remote sensing data and determine the spatial distribution of sub-pixels within the coarse resolution pixels.Firstly,the membership of pixels which belong to winter wheat is calculated using a 25-m resolution resampled Landsat Thematic Mapper(TM)image based on the Bayesian equation.Then,the winter wheat abundance(acreage fraction in a pixel)is assessed by using a multiple regression model based on the unique temporal change features from moderate resolution imaging spectroradiometer(MODIS)time series data.Finally,winter wheat is identified by the proposed Abundance-Membership(AM)model based on the spatial relationship between the two types of pixels.Specifically,winter wheat is identified by comparing the spatially corresponding 10×10 membership pixels of each abundance pixel.In other words,this method takes advantage of the relative size of membership in a local space,rather than the absolute size in the entire study area.This method is tested in the major agricultural area of Yiluo Basin,China,and the results show that acreage accuracy(Aa)is 93.01%and sampling accuracy(As)is 91.40%.Confusion matrix shows that overall accuracy(OA)is 91.4%and the kappa coefficient(Kappa)is 0.755.These values are significantly improved compared to the traditional Maximum Likelihood classification(MLC)and Random Forest classification(RFC)which rely on spectral features.The results demonstrate that the identification accuracy can be improved by integrating spectral and temporal information.Since the identification of winter wheat is performed in the space corresponding to each MODIS pixel,the influence of differences of environmental conditions is greatly reduced.This advantage allows the proposed method to be effectively applied in other places.
基金supported by the Program for Changjiang Scholars and Innovative Research Team in University under Grant No.IRT1078the Key Program of NSFC-Guangdong Union Foundation under Grant No.U1135002+1 种基金Major National S&T Program under Grant No.2011ZX03005-002the Fundamental Research Funds for the Central Universities under Grant No.JY10000903001
文摘Wireless Mesh Networks （WMNs） are vulnerable to various security threats because of their special infrastructure and communication mode, wherein insider attacks are the most challenging issue. To address this problem and protect innocent users from malicious attacks, it is important to encourage cooperation and deter malicious behaviors. Reputation systems constitute a major category of techniques used for managing trust in distributed networks, and they are effective in characterizing and quantifying a node＇s behavior for WMNs. However, conventional layered reputation mechanisms ignore several key factors of reputation in other layers; therefore, they cannot provide optimal performance and accurate malicious node identification and isolation for WMNs. In this paper, we propose a novel dynamic reputation mechanism, SLCRM, which couples reputation systems with a cross-layer design and node-security-rating classification techniques to dynamically detect and restrict insider attacks. Simulation results show that in terms of network throughput, packet delivery ratio, malicious nodes＇ identification, and success rates, SI_CRM imple- ments security protection against insider attacks in a more dynamic, effective, and efficient manner than the subjective logic and uncertainty-based reputation model and the familiarity-based reputation model.
基金This project was supported by the National Natural Foundation of China (60404022) and the Foundation of Department ofEducation of Hebei Province (2002209).
文摘Mixture model based image segmentation method, which assumes that image pixels are independent and do not consider the position relationship between pixels, is not robust to noise and usually leads to misclassification. A new segmentation method, called multi-resolution Ganssian mixture model method, is proposed. First, an image pyramid is constructed and son-father link relationship is built between each level of pyramid. Then the mixture model segmentation method is applied to the top level. The segmentation result on the top level is passed top-down to the bottom level according to the son-father link relationship between levels. The proposed method considers not only local but also global information of image, it overcomes the effect of noise and can obtain better segmentation result. Experimental result demonstrates its effectiveness.
基金supported by the National Natural Science Foundation of China under Grant No.61271281the National High Technology Research and Development Program of China (863 Program) under Grant No.SS2013AA010503
文摘To improve the robustness of the Low Earth Orbit(LEO) satellites networks and realise load balancing, a Cross-layer design and Ant-colony optimization based Load-balancing routing algorithm for LEO Satellite Networks(CAL-LSN) is proposed in this paper. In CALLSN, mobile agents are used to gather routing information actively. CAL-LSN can utilise the information of the physical layer to make routing decision during the route construction phase. In order to achieve load balancing, CALLSN makes use of a multi-objective optimization model. Meanwhile, how to take the value of some key parameters is discussed while designing the algorithm so as to improve the reliability. The performance is measured by the packet delivery rate, the end-to-end delay, the link utilization and delay jitter. Simulation results show that CAL-LSN performs well in balancing traffic load and increasing the packet delivery rate. Meanwhile, the end-to-end delay and delay jitter performance can meet the requirement of video transmission.
基金supported by the National Natural Science Foundation of China(Grant Nos.11902085 and 11832009)the Science and Technology Association Young Scientific and Technological Talents Support Project of Guangzhou City(Grant No.SKX20210304)the Natural Science Foundation of Guangdong Province(Grant No.2021Al515010320).
文摘Huge calculation burden and difficulty in convergence are the two central conundrums of nonlinear topology optimization(NTO).To this end,a multi-resolution nonlinear topology optimization(MR-NTO)method is proposed based on the multiresolution design strategy(MRDS)and the additive hyperelasticity technique(AHT),taking into account the geometric nonlinearity and material nonlinearity.The MR-NTO strategy is established in the framework of the solid isotropic material with penalization(SIMP)method,while the Neo-Hookean hyperelastic material model characterizes the material nonlinearity.The coarse analysis grid is employed for finite element(FE)calculation,and the fine material grid is applied to describe the material configuration.To alleviate the convergence problem and reduce sensitivity calculation complexity,the software ANSYS coupled with AHT is utilized to perform the nonlinear FE calculation.A strategy for redistributing strain energy is proposed during the sensitivity analysis,i.e.,transforming the strain energy of the analysis element into that of the material element,including Neo-Hooken and second-order Yeoh material.Numerical examples highlight three distinct advantages of the proposed method,i.e.,it can(1)significantly improve the computational efficiency,(2)make up for the shortcoming that NTO based on AHT may have difficulty in convergence when solving the NTO problem,especially for 3D problems,(3)successfully cope with high-resolution 3D complex NTO problems on a personal computer.
基金Supported by National Natural Science Foundation of China(No.90604013)Natural Science Foundation of Tianjin(No.08JCYBJC14200)National High Technology Research and Development Program("863"Program)of China(No.2007AA01Z220)
文摘Since most ad hoc mobile devices today operate on batteries,the power consumption becomes an important issue.This paper proposes a cross-layer design of energy-aware ad hoc on-demand distance vector(CEAODV) routing protocol which adopts cross-layer mechanism and energy-aware metric to improve AODV routing protocol to reduce the energy consumption and then prolong the life of the whole network.In CEAODV,the link layer and the routing layer work together to choose the optimized transmission power for nodes and the route for packets.The link layer provides the energy consumption information for the routing layer and the routing layer chooses route accordingly and conversely controls the link layer to adjust the transmission power.The simulation result shows that CEAODV can outperform AODV to save more energy.It can reduce the consumed energy by about 8%over traditional energy-aware algorithm.And the performance is better when the traffic load is higher in the network.
基金Project supported by the National Natural Science Foundation of China (No. 60272031), the Hi-Tech Research and Development Program (863) of China (No. 2003AA131032-2), and the Natural Science Foundation of Zhejiang Province (No. M603202), China
文摘Multi-sensor image registration has been widely used in remote sensing and medical image field, but registration performance is degenerated when heterogeneous images are involved. An image registration method based on multi-resolution shape analysis is proposed in this paper, to deal with the problem that the shape of similar objects is always invariant. The contours of shapes are first detected as visual features using an extended contour search algorithm in order to reduce effects of noise, and the multi-resolution shape descriptor is constructed through Fourier curvature representation of the contour’s chain code. Then a minimum distance function is used to judge the similarity between two contours. To avoid the effect of different resolution and intensity distribution, suitable resolution of each image is selected by maximizing the consistency of its pyramid shapes. Finally, the transformation parameters are estimated based on the matched control-point pairs which are the centers of gravity of the closed contours. Multi-sensor Landsat TM imagery and infrared imagery have been used as experimental data for comparison with the classical contour-based registration. Our results have been shown to be superior to the classical ones.
基金supported by the National Natural Science Foundation of China (No.61101125)
文摘According to large coverage of satellites, there are various channel states in a satellite broadcasting network. In order to introduce an efficient rateless transmission method to satellite multimedia broadcasting/multicast services with finite-length packets, a cross-layer packet transmission method is proposed with Luby transform （LT） codes for efficiency in the network layer and low density parity check （LDPC） codes for reliability in the physical layer jointly. The codewords generated from an LT encoder are divided into finite-length packets, which are encoded by an LDPC encoder subsequently. Based on noise and fading effects of satellite channels, the LT packets received from an LDPC decoder either have no error or are marked as erased, which can be mod- eled as a binary erasure channels （BECs）. By theoretical analysis on LT parameters and LDPC parameters, the relationships between LDPC code rates in the physical layer and LT codes word lengths in the network layer are investigated. With tradeoffs between the LT codes word lengths and the LDPC code rates, optimized cross-layer solutions are achieved with a binary search algorithm. Verified by simulations, the proposed solution for cross-layer parameters design can provide the best transmission mode according to satellite states, so as to improve throughput performance for satellite multimedia transmission.
基金This project was supported by the National Natural Science Foundation of China (60672034)the Research Fund for the Doctoral Program of Higher Education(20060217021)the Natural Science Foundation of Heilongjiang Province of China (ZJG0606-01)
文摘Sonar images have complex background, low contrast, and deteriorative edges; these characteristics make it difficult for researchers to dispose the sonar objects. The multi-resolution analysis represents the signals in different scales efficiently, which is widely used in image processing. Wavelets are successful in disposing point discontinuities in one dimension, but not in two dimensions. The finite Ridgelet transform （FRIT） deals efficiently with the singularity in high dimension. It presents three improved denoising approaches, which are based on FRIT and used in the sonar image disposal technique. By experiment and comparison with traditional methods, these approaches not only suppress the artifacts, but also obtain good effect in edge keeping and SNR of the sonar image denoising.
基金Supported by the National Natural Science Foundation of China (No. 60803036)the Scientific Research Fund of Heilongjiang Provincial Education Department (No.11531013)
文摘Aiming at the higher bit-rate occupation of motion vector encoding and more time load of full-searching strategies, a multi-resolution motion estimation and compensation algorithm based on adjacent prediction of frame difference was proposed.Differential motion detection was employed to image sequences and proper threshold was adopted to identify the connected region.Then the motion region was extracted to carry out motion estimation and motion compensation on it.The experiment results show that the encoding efficiency of motion vector is promoted, the complexity of motion estimation is reduced and the quality of the reconstruction image at the same bit-rate as Multi-Resolution Motion Estimation(MRME) is improved.
基金Supported by the National Natural Science Foundation of China(51874328,52074311,U1762215,U19B6003-05)China National Petroleum Corporation-China University of Petroleum(Beijing)Strategic Cooperation Science and Technology Project(ZLZX2020-02)。
文摘Triaxial fracturing modeling experiments were carried out on whole diameter shale cores from different layers of Shahejie Formation in the Dongpu sag,Bohai Bay Basin to find out the vertical propagation shapes of hydraulic fractures in different reservoirs.A numerical simulation method of inserting global cohesive elements was adopted to build a pseudo-three-dimension fracture propagation model for multiple shale oil reservoirs considering interface strength,perforation location,and pump rate to research the features of hydraulic fracture(HF)penetrating through layers.The hydraulic fracture propagates in a cross pattern in tight sandstone layers,in a straight line in sandstone layers with natural fractures,forms ladder fracture in shale layers with beddings.The hydraulic fracture propagates in a stripe shape vertically in both sandstone and shale layers,but it spreads in the plane in shale layers after connecting beddings.Restricted by beddings,the hydraulic fractures in shale layers are smaller in height than those in sandstone layers.When a sandstone layer and a shale layer are fractured at the same time,the fracture extends the most in height after the two layers are connected.Perforating at positions where the sandstone-shale interface is higher in strength and increasing the pumping rate can enhance the fracture height,thus achieving the goal of increasing the production by cross-layer fracturing in multiple shale oil layers.
基金National Natural Science Foundation of China (11072264)
文摘The density field around a vortex generator （VG） in supersonic flow is studied with a nanoparticle-based planar laser scattering （NPLS） method. Based on the calibration, i.e., the density distribution of the supersonic flow around a wedge, the density field of a supersonic VG is measured. According to movement characteristics of coherent structure in VG’s flow fields and the basic concepts of wavelet, the density fluctuating signals and multi-resolution characteristics of density field images are studied. The multi-resolution characteristics of density fluctuation can be analyzed with wavelet transformation of NPLS images. The wavelet approximate coefficients of density fluctuating signals exhibit their characteristics at different scales, and the corresponding detail coefficients show the difference of diverse layer smooth approximation in some way. Based on 2D wavelet decomposition and reconstruction of density field images, the approximate and detail signals at different scales are studied, and the coherent structures at different scales are extracted and analyzed.
基金Project partially supported by NSF (No. CCR0306438) and theBoeing Company, USA
文摘We propose a high-performance path planning algorithm for automatic target tracking in the applications of real-time simulation and visualization of large-scale terrain datasets, with a large number of moving objects （such as vehicles） tracking multiple moving targets. By using a modified Dijkstra＇s algorithm, an optimal path between each vehicle-target pair over a weighted grid-presented terrain is computed and updated to eliminate the problem of local minima and losing of tracking. Then, a dynamic path re-planning strategy using multi-resolution representation of a dynamic updating region is proposed to achieve high-performance by trading-off precision for efficiency, while guaranteeing accuracy. Primary experimental results showed that our algorithm successfully achieved l0 to 96 frames per second interactive path-replanning rates during a terrain simulation scenario with 10 to 100 vehicles and multiple moving targets.
基金supported in part by the National Natural Science Foundation of China (No. 61971220)the Fundamental Research Funds for the Central Universities of Nanjing University of Aeronautics and Astronautics(NUAA)(No.kfjj20200414)Natural Science Foundation of Jiangsu Province in China (No. BK20181289)。
文摘The performance of uplink distributed massive multiple-input multiple-output(MIMO)systems with crosslayer design(CLD) is investigated over Rayleigh fading channel, which combines the discrete rate adaptive modulation with truncated automatic repeat request. By means of the performance analysis, the closed-form expressions of average packet error rate(APER)and overall average spectral efficiency(ASE)of distributed massive MIMO systems with CLD are derived based on the conditional probability density function of each user’s approximate effective signal-to-noise ratio(SNR)and the switching thresholds under the target packet loss rate(PLR)constraint.With these results,using the approximation of complementary error functions,the approximate APER and overall ASE are also deduced. Simulation results illustrate that the obtained theoretical ASE and APER can match the corresponding simulations well. Besides,the target PLR requirement is satisfied,and the distributed massive MIMO systems offer an obvious performance gain over the co-located massive MIMO systems.
