Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagati...Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.展开更多
Medium-high maturity continental shale oil is one of the hydrocarbon resources with the most potential for successful development in China.Nevertheless,the unique geological conditions of a multi-lithologic superposit...Medium-high maturity continental shale oil is one of the hydrocarbon resources with the most potential for successful development in China.Nevertheless,the unique geological conditions of a multi-lithologic superposition shield the vertical propagation of hydraulic fractures and limit the longitudinal reconstruction in reservoirs,posing a great challenge for large-scale volumetric fracturing.Radial wellbore crosslayer fracturing,which transforms the interaction between the hydraulic fractures and lithologic interface into longitudinal multilayer competitive initiation,could provide a potential solution for this engineering challenge.To determine the longitudinal propagation behaviors of fractures guided by radial wellbores,true triaxial fracturing experiments were performed on multilayer shale-sandstone samples,with a focus on the injection pressure response,fracture morphology,and cross-layer pattern.The effects of the radial borehole length L,vertical stress difference K_(v),injection rate Q,and viscosity m of the fracturing fluid were analyzed.The results indicate that radial wellbores can greatly facilitate fracture initiation and cross-layer propagation.Unlike conventional hydraulic fracturing,there are two distinct fracture propagation patterns in radial wellbore fracturing:cross-layering and skip-layering.The fracture height guided by a radial wellbore is positively correlated with K_(v),Q,and m.Increasing these parameters causes a shift in the fracture initiation from a single root to an asynchronous root/toe end and can improve the cross-layer propagation capacity.Critical parameter thresholds exist for fracture propagation through and across interlayers under the guidance of radial boreholes.A parameter combination of critical cross-layering/skip-layering or alternating displacement/viscosity is recommended to simultaneously improve the fracture height and degree of lateral activation.The degree of correlation of different parameters with the vertical fracture height can be written as L>Q/m>K_(v).Increasing the radial wellbore length can effectively facilitate fracture cross-/skip-layer propagation and reduce the critical threshold of injection parameters,which is conducive to maximizing the stimulated reservoir volume.展开更多
Electron beam injectors are pivotal components of large-scale scientific instruments,such as synchrotron radiation sources,free-electron lasers,and electron-positron colliders.The quality of the electron beam produced...Electron beam injectors are pivotal components of large-scale scientific instruments,such as synchrotron radiation sources,free-electron lasers,and electron-positron colliders.The quality of the electron beam produced by the injector critically influences the performance of the entire accelerator-based scientific research apparatus.The injectors of such facilities usually use photocathode and thermionic-cathode electron guns.Although the photocathode injector can produce electron beams of excellent quality,its associated laser system is massive and intricate.The thermionic-cathode electron gun,especially the gridded electron gun injector,has a simple structure capable of generating numerous electron beams.However,its emittance is typically high.In this study,methods to reduce beam emittance are explored through a comprehensive analysis of various grid structures and preliminary design results,examining the evolution of beam phase space at different grid positions.An optimization method for reducing the emittance of a gridded thermionic-cathode electron gun is proposed through theoretical derivation,electromagnetic-field simulation,and beam-dynamics simulation.A 50%reduction in emittance was achieved for a 50 keV,1.7 A electron gun,laying the foundation for the subsequent design of a high-current,low-emittance injector.展开更多
Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the ...Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.展开更多
Sustainable energy systems will entail a change in the carbon intensity projections,which should be carried out in a proper manner to facilitate the smooth running of the grid and reduce greenhouse emissions.The prese...Sustainable energy systems will entail a change in the carbon intensity projections,which should be carried out in a proper manner to facilitate the smooth running of the grid and reduce greenhouse emissions.The present article outlines the TransCarbonNet,a novel hybrid deep learning framework with self-attention characteristics added to the bidirectional Long Short-Term Memory(Bi-LSTM)network to forecast the carbon intensity of the grid several days.The proposed temporal fusion model not only learns the local temporal interactions but also the long-term patterns of the carbon emission data;hence,it is able to give suitable forecasts over a period of seven days.TransCarbonNet takes advantage of a multi-head self-attention element to identify significant temporal connections,which means the Bi-LSTM element calculates sequential dependencies in both directions.Massive tests on two actual data sets indicate much improved results in comparison with the existing results,with mean relative errors of 15.3 percent and 12.7 percent,respectively.The framework has given explicable weights of attention that reveal critical periods that influence carbon intensity alterations,and informed decisions on the management of carbon sustainability.The effectiveness of the proposed solution has been validated in numerous cases of operations,and TransCarbonNet is established to be an effective tool when it comes to carbon-friendly optimization of the grid.展开更多
Modern power systems increasingly depend on interconnected microgrids to enhance reliability and renewable energy utilization.However,the high penetration of intermittent renewable sources often causes frequency devia...Modern power systems increasingly depend on interconnected microgrids to enhance reliability and renewable energy utilization.However,the high penetration of intermittent renewable sources often causes frequency deviations,voltage fluctuations,and poor reactive power coordination,posing serious challenges to grid stability.Conventional Interconnection FlowControllers(IFCs)primarily regulate active power flowand fail to effectively handle dynamic frequency variations or reactive power sharing in multi-microgrid networks.To overcome these limitations,this study proposes an enhanced Interconnection Flow Controller(e-IFC)that integrates frequency response balancing and an Interconnection Reactive Power Flow Controller(IRFC)within a unified adaptive control structure.The proposed e-IFC is implemented and analyzed in DIgSILENT PowerFactory to evaluate its performance under various grid disturbances,including frequency drops,load changes,and reactive power fluctuations.Simulation results reveal that the e-IFC achieves 27.4% higher active power sharing accuracy,19.6% lower reactive power deviation,and 18.2% improved frequency stability compared to the conventional IFC.The adaptive controller ensures seamless transitions between grid-connected and islanded modes and maintains stable operation even under communication delays and data noise.Overall,the proposed e-IFCsignificantly enhances active-reactive power coordination and dynamic stability in renewable-integrated multi-microgrid systems.Future research will focus on coupling the e-IFC with tertiary-level optimization frameworks and conducting hardware-in-the-loop validation to enable its application in large-scale smart microgrid environments.展开更多
The orthogonal frequency division multiple access( OFDMA) based communication system has been considered as the main trend of next-Generation communication system. But the existing resource allocation algorithm design...The orthogonal frequency division multiple access( OFDMA) based communication system has been considered as the main trend of next-Generation communication system. But the existing resource allocation algorithm designed for such system is always with high complexity thus hard to be realized. To solve such problem with the constraints of spectrum efficiency and buffer state,a novel cross-layer resource allocation algorithm( RAA) is proposed in this paper. The goal of our RAA is to maximize the system throughput while satisfying several practical constraints,such as fairness among services,head of line( Ho L) delay and diverse quality of service( Qo S) requirements. Due to these constraints,finding the optimal solution becomes a NPhard problem. Therefore in this paper a novel method to solve such problem with acceptable complexity is proposed within following steps: firstly,based on the link state we formulate the ideal subchannel allocation strategy as a convex optimization problem,which can be efficiently solved by our proposed lagrange multiplier technique subchannel allocation( LMTSA) algorithm; secondly,according to the obtained channel allocation matrix,a power allocation algorithm based on the water-filling power allocation( WPA) idea is deployed to get the optimal power allocation matrix combining with adaptive modulation and coding( AMC); finally,through a greedy algorithm,the ultimate subchannel and power allocation matrix can be obtained based on iterative method. The simulation results illustrate that we can achieve the higher throughput and better Qo S performance than the widely-used maximum throughput( MT) algorithm and round robin( RR) algorithm.展开更多
Wireless Mesh Networks （WMNs） are vulnerable to various security threats because of their special infrastructure and communication mode, wherein insider attacks are the most challenging issue. To address this proble...Wireless Mesh Networks （WMNs） are vulnerable to various security threats because of their special infrastructure and communication mode, wherein insider attacks are the most challenging issue. To address this problem and protect innocent users from malicious attacks, it is important to encourage cooperation and deter malicious behaviors. Reputation systems constitute a major category of techniques used for managing trust in distributed networks, and they are effective in characterizing and quantifying a node＇s behavior for WMNs. However, conventional layered reputation mechanisms ignore several key factors of reputation in other layers; therefore, they cannot provide optimal performance and accurate malicious node identification and isolation for WMNs. In this paper, we propose a novel dynamic reputation mechanism, SLCRM, which couples reputation systems with a cross-layer design and node-security-rating classification techniques to dynamically detect and restrict insider attacks. Simulation results show that in terms of network throughput, packet delivery ratio, malicious nodes＇ identification, and success rates, SI_CRM imple- ments security protection against insider attacks in a more dynamic, effective, and efficient manner than the subjective logic and uncertainty-based reputation model and the familiarity-based reputation model.展开更多
To improve the robustness of the Low Earth Orbit(LEO) satellites networks and realise load balancing, a Cross-layer design and Ant-colony optimization based Load-balancing routing algorithm for LEO Satellite Networks(...To improve the robustness of the Low Earth Orbit(LEO) satellites networks and realise load balancing, a Cross-layer design and Ant-colony optimization based Load-balancing routing algorithm for LEO Satellite Networks(CAL-LSN) is proposed in this paper. In CALLSN, mobile agents are used to gather routing information actively. CAL-LSN can utilise the information of the physical layer to make routing decision during the route construction phase. In order to achieve load balancing, CALLSN makes use of a multi-objective optimization model. Meanwhile, how to take the value of some key parameters is discussed while designing the algorithm so as to improve the reliability. The performance is measured by the packet delivery rate, the end-to-end delay, the link utilization and delay jitter. Simulation results show that CAL-LSN performs well in balancing traffic load and increasing the packet delivery rate. Meanwhile, the end-to-end delay and delay jitter performance can meet the requirement of video transmission.展开更多
Since most ad hoc mobile devices today operate on batteries,the power consumption becomes an important issue.This paper proposes a cross-layer design of energy-aware ad hoc on-demand distance vector(CEAODV) routing pr...Since most ad hoc mobile devices today operate on batteries,the power consumption becomes an important issue.This paper proposes a cross-layer design of energy-aware ad hoc on-demand distance vector(CEAODV) routing protocol which adopts cross-layer mechanism and energy-aware metric to improve AODV routing protocol to reduce the energy consumption and then prolong the life of the whole network.In CEAODV,the link layer and the routing layer work together to choose the optimized transmission power for nodes and the route for packets.The link layer provides the energy consumption information for the routing layer and the routing layer chooses route accordingly and conversely controls the link layer to adjust the transmission power.The simulation result shows that CEAODV can outperform AODV to save more energy.It can reduce the consumed energy by about 8%over traditional energy-aware algorithm.And the performance is better when the traffic load is higher in the network.展开更多
According to large coverage of satellites, there are various channel states in a satellite broadcasting network. In order to introduce an efficient rateless transmission method to satellite multimedia broadcasting/mul...According to large coverage of satellites, there are various channel states in a satellite broadcasting network. In order to introduce an efficient rateless transmission method to satellite multimedia broadcasting/multicast services with finite-length packets, a cross-layer packet transmission method is proposed with Luby transform （LT） codes for efficiency in the network layer and low density parity check （LDPC） codes for reliability in the physical layer jointly. The codewords generated from an LT encoder are divided into finite-length packets, which are encoded by an LDPC encoder subsequently. Based on noise and fading effects of satellite channels, the LT packets received from an LDPC decoder either have no error or are marked as erased, which can be mod- eled as a binary erasure channels （BECs）. By theoretical analysis on LT parameters and LDPC parameters, the relationships between LDPC code rates in the physical layer and LT codes word lengths in the network layer are investigated. With tradeoffs between the LT codes word lengths and the LDPC code rates, optimized cross-layer solutions are achieved with a binary search algorithm. Verified by simulations, the proposed solution for cross-layer parameters design can provide the best transmission mode according to satellite states, so as to improve throughput performance for satellite multimedia transmission.展开更多
Triaxial fracturing modeling experiments were carried out on whole diameter shale cores from different layers of Shahejie Formation in the Dongpu sag,Bohai Bay Basin to find out the vertical propagation shapes of hydr...Triaxial fracturing modeling experiments were carried out on whole diameter shale cores from different layers of Shahejie Formation in the Dongpu sag,Bohai Bay Basin to find out the vertical propagation shapes of hydraulic fractures in different reservoirs.A numerical simulation method of inserting global cohesive elements was adopted to build a pseudo-three-dimension fracture propagation model for multiple shale oil reservoirs considering interface strength,perforation location,and pump rate to research the features of hydraulic fracture(HF)penetrating through layers.The hydraulic fracture propagates in a cross pattern in tight sandstone layers,in a straight line in sandstone layers with natural fractures,forms ladder fracture in shale layers with beddings.The hydraulic fracture propagates in a stripe shape vertically in both sandstone and shale layers,but it spreads in the plane in shale layers after connecting beddings.Restricted by beddings,the hydraulic fractures in shale layers are smaller in height than those in sandstone layers.When a sandstone layer and a shale layer are fractured at the same time,the fracture extends the most in height after the two layers are connected.Perforating at positions where the sandstone-shale interface is higher in strength and increasing the pumping rate can enhance the fracture height,thus achieving the goal of increasing the production by cross-layer fracturing in multiple shale oil layers.展开更多
With correlating with human perception, quality of experience(Qo E) is also an important measurement in evaluation of video quality in addition to quality of service(Qo S). A cross-layer scheme based on Lyapunov optim...With correlating with human perception, quality of experience(Qo E) is also an important measurement in evaluation of video quality in addition to quality of service(Qo S). A cross-layer scheme based on Lyapunov optimization framework for H.264/AVC video streaming over wireless Ad hoc networks is proposed, with increasing both Qo E and Qo S performances. Different from existing works, this scheme routes and schedules video packets according to the statuses of the frame buffers at the destination nodes to reduce buffer underflows and to increase video playout continuity. The waiting time of head-ofline packets of data queues are considered in routing and scheduling to reduce the average end-to-end delay of video sessions. Different types of packets are allocated with different priorities according to their generated rates under H.264/AVC. To reduce the computational complexity, a distributed media access control policy and a power control algorithm cooperating with the media access policy are proposed. Simulation results show that, compared with existing schemes, this scheme can improve both the Qo S and Qo E performances. The average peak signal-to-noise ratio(PSNR) of the received video streams is also increased.展开更多
The performance of uplink distributed massive multiple-input multiple-output(MIMO)systems with crosslayer design(CLD) is investigated over Rayleigh fading channel, which combines the discrete rate adaptive modulation ...The performance of uplink distributed massive multiple-input multiple-output(MIMO)systems with crosslayer design(CLD) is investigated over Rayleigh fading channel, which combines the discrete rate adaptive modulation with truncated automatic repeat request. By means of the performance analysis, the closed-form expressions of average packet error rate(APER)and overall average spectral efficiency(ASE)of distributed massive MIMO systems with CLD are derived based on the conditional probability density function of each user’s approximate effective signal-to-noise ratio(SNR)and the switching thresholds under the target packet loss rate(PLR)constraint.With these results,using the approximation of complementary error functions,the approximate APER and overall ASE are also deduced. Simulation results illustrate that the obtained theoretical ASE and APER can match the corresponding simulations well. Besides,the target PLR requirement is satisfied,and the distributed massive MIMO systems offer an obvious performance gain over the co-located massive MIMO systems.展开更多
This paper introduces an ant colony routing and wavelength assignment algorithm based on cross-layer design(CL-ACRWA),which can overcome the adverse effects of Doppler wavelength shift on data transmission in optical ...This paper introduces an ant colony routing and wavelength assignment algorithm based on cross-layer design(CL-ACRWA),which can overcome the adverse effects of Doppler wavelength shift on data transmission in optical satellite networks. Firstly, a cross-layer optimization model is built, which considers the Doppler wavelength shift, the transmission delay as well as wavelength-continuity constraint. Then an ant colony algorithm is utilized to solve the cross-layer optimization model, resulting in finding an optimal light path satisfying the above constraints for every connection request. The performance of CL-ACRWA is measured by the communication success probability, the convergence property and the transmission delay. Simulation results show that CL-ACRWA performs well in communication success probability and has good global search ability as well as fast convergence speed. Meanwhile, the transmission delay can meet the basic requirement of real-time transmission of business.展开更多
In recent years,there has been extensive research on object detection methods applied to optical remote sensing images utilizing convolutional neural networks.Despite these efforts,the detection of small objects in re...In recent years,there has been extensive research on object detection methods applied to optical remote sensing images utilizing convolutional neural networks.Despite these efforts,the detection of small objects in remote sensing remains a formidable challenge.The deep network structure will bring about the loss of object features,resulting in the loss of object features and the near elimination of some subtle features associated with small objects in deep layers.Additionally,the features of small objects are susceptible to interference from background features contained within the image,leading to a decline in detection accuracy.Moreover,the sensitivity of small objects to the bounding box perturbation further increases the detection difficulty.In this paper,we introduce a novel approach,Cross-Layer Fusion and Weighted Receptive Field-based YOLO(CAW-YOLO),specifically designed for small object detection in remote sensing.To address feature loss in deep layers,we have devised a cross-layer attention fusion module.Background noise is effectively filtered through the incorporation of Bi-Level Routing Attention(BRA).To enhance the model’s capacity to perceive multi-scale objects,particularly small-scale objects,we introduce a weightedmulti-receptive field atrous spatial pyramid poolingmodule.Furthermore,wemitigate the sensitivity arising from bounding box perturbation by incorporating the joint Normalized Wasserstein Distance(NWD)and Efficient Intersection over Union(EIoU)losses.The efficacy of the proposedmodel in detecting small objects in remote sensing has been validated through experiments conducted on three publicly available datasets.The experimental results unequivocally demonstrate the model’s pronounced advantages in small object detection for remote sensing,surpassing the performance of current mainstream models.展开更多
This paper describes the deployment optimization technology and the cross-layer design of a surveil-lance WSN system applied in relic protection.Facing the typical technical challenges in the applicationcontext of rel...This paper describes the deployment optimization technology and the cross-layer design of a surveil-lance WSN system applied in relic protection.Facing the typical technical challenges in the applicationcontext of relic protection,we firstly propose a deployment technology based on ant colony optimization al-gorithm(DT-ACO)to overcome the difficulties in communication connectivity and sensing coverage.Meanwhile,DT-ACO minimizes the overall cost of the system as much as possible.Secondly we proposea novel power-aware cross-layer scheme(PACS)to facilitate adjustable system lifetime and surveillanceaccuracy.The performance analysis shows that we achieve lower device cost,significant extension of thesystem lifetime and improvement on the data delivery rate compared with the traditional methods.展开更多
We investigate the problem of how to minimize the energy consumption in multi-hop Wireless Sensor Network (WSN),under the constraint of end-to-end reliability Quality of Seervice (QoS) requirement.Based on the investi...We investigate the problem of how to minimize the energy consumption in multi-hop Wireless Sensor Network (WSN),under the constraint of end-to-end reliability Quality of Seervice (QoS) requirement.Based on the investigation,we jointly consider the routing,relay selection and power allocation algorithm,and present a novel distributed cross-layer strategy using opportunistic relaying scheme for cooperative communication.The results show that under the same QoS requirement,the proposed cross-layer strategy performs better than other cross-layer cooperative communication algorithms in energy efficiency.We also investigated the impact of several parameters on the energy efficiency of the cooperative communication in WSNs,thus can be used to provide guidelines to decide when and how to apply cooperation for a given setup.展开更多
Due to the fading characteristics of wireless channels and the burstiness of data traffic,how to deal with congestion in Ad-hoc networks with effective algorithms is still open and challenging.In this paper,we focus o...Due to the fading characteristics of wireless channels and the burstiness of data traffic,how to deal with congestion in Ad-hoc networks with effective algorithms is still open and challenging.In this paper,we focus on enabling congestion control to minimize network transmission delays through flexible power control.To effectively solve the congestion problem,we propose a distributed cross-layer scheduling algorithm,which is empowered by graph-based multi-agent deep reinforcement learning.The transmit power is adaptively adjusted in real-time by our algorithm based only on local information(i.e.,channel state information and queue length)and local communication(i.e.,information exchanged with neighbors).Moreover,the training complexity of the algorithm is low due to the regional cooperation based on the graph attention network.In the evaluation,we show that our algorithm can reduce the transmission delay of data flow under severe signal interference and drastically changing channel states,and demonstrate the adaptability and stability in different topologies.The method is general and can be extended to various types of topologies.展开更多
文摘Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.
基金supported by the National Natural Science Foun-dation of China(52421002,U24B6001,52204019,and 52192624)the Open Foundation of the Shanxi Key Laboratory of Carbon Dioxide Sequestration and Enhanced Oil Recovery。
文摘Medium-high maturity continental shale oil is one of the hydrocarbon resources with the most potential for successful development in China.Nevertheless,the unique geological conditions of a multi-lithologic superposition shield the vertical propagation of hydraulic fractures and limit the longitudinal reconstruction in reservoirs,posing a great challenge for large-scale volumetric fracturing.Radial wellbore crosslayer fracturing,which transforms the interaction between the hydraulic fractures and lithologic interface into longitudinal multilayer competitive initiation,could provide a potential solution for this engineering challenge.To determine the longitudinal propagation behaviors of fractures guided by radial wellbores,true triaxial fracturing experiments were performed on multilayer shale-sandstone samples,with a focus on the injection pressure response,fracture morphology,and cross-layer pattern.The effects of the radial borehole length L,vertical stress difference K_(v),injection rate Q,and viscosity m of the fracturing fluid were analyzed.The results indicate that radial wellbores can greatly facilitate fracture initiation and cross-layer propagation.Unlike conventional hydraulic fracturing,there are two distinct fracture propagation patterns in radial wellbore fracturing:cross-layering and skip-layering.The fracture height guided by a radial wellbore is positively correlated with K_(v),Q,and m.Increasing these parameters causes a shift in the fracture initiation from a single root to an asynchronous root/toe end and can improve the cross-layer propagation capacity.Critical parameter thresholds exist for fracture propagation through and across interlayers under the guidance of radial boreholes.A parameter combination of critical cross-layering/skip-layering or alternating displacement/viscosity is recommended to simultaneously improve the fracture height and degree of lateral activation.The degree of correlation of different parameters with the vertical fracture height can be written as L>Q/m>K_(v).Increasing the radial wellbore length can effectively facilitate fracture cross-/skip-layer propagation and reduce the critical threshold of injection parameters,which is conducive to maximizing the stimulated reservoir volume.
基金supported by the Hundred-person Program of Chinese Academy of Sciences and the National Natural Science Foundation of China(No.11905074).
文摘Electron beam injectors are pivotal components of large-scale scientific instruments,such as synchrotron radiation sources,free-electron lasers,and electron-positron colliders.The quality of the electron beam produced by the injector critically influences the performance of the entire accelerator-based scientific research apparatus.The injectors of such facilities usually use photocathode and thermionic-cathode electron guns.Although the photocathode injector can produce electron beams of excellent quality,its associated laser system is massive and intricate.The thermionic-cathode electron gun,especially the gridded electron gun injector,has a simple structure capable of generating numerous electron beams.However,its emittance is typically high.In this study,methods to reduce beam emittance are explored through a comprehensive analysis of various grid structures and preliminary design results,examining the evolution of beam phase space at different grid positions.An optimization method for reducing the emittance of a gridded thermionic-cathode electron gun is proposed through theoretical derivation,electromagnetic-field simulation,and beam-dynamics simulation.A 50%reduction in emittance was achieved for a 50 keV,1.7 A electron gun,laying the foundation for the subsequent design of a high-current,low-emittance injector.
文摘Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.
基金funded by the Deanship of Scientific Research and Libraries at Princess Nourah bint Abdulrahman University,through the“Nafea”Program,Grant No.(NP-45-082).
文摘Sustainable energy systems will entail a change in the carbon intensity projections,which should be carried out in a proper manner to facilitate the smooth running of the grid and reduce greenhouse emissions.The present article outlines the TransCarbonNet,a novel hybrid deep learning framework with self-attention characteristics added to the bidirectional Long Short-Term Memory(Bi-LSTM)network to forecast the carbon intensity of the grid several days.The proposed temporal fusion model not only learns the local temporal interactions but also the long-term patterns of the carbon emission data;hence,it is able to give suitable forecasts over a period of seven days.TransCarbonNet takes advantage of a multi-head self-attention element to identify significant temporal connections,which means the Bi-LSTM element calculates sequential dependencies in both directions.Massive tests on two actual data sets indicate much improved results in comparison with the existing results,with mean relative errors of 15.3 percent and 12.7 percent,respectively.The framework has given explicable weights of attention that reveal critical periods that influence carbon intensity alterations,and informed decisions on the management of carbon sustainability.The effectiveness of the proposed solution has been validated in numerous cases of operations,and TransCarbonNet is established to be an effective tool when it comes to carbon-friendly optimization of the grid.
基金the Deanship of Scientific Research at Northern Border University,Arar,Saudi Arabia,for funding this research work through the project number“NBU-FFR-2025-3623-11”.
文摘Modern power systems increasingly depend on interconnected microgrids to enhance reliability and renewable energy utilization.However,the high penetration of intermittent renewable sources often causes frequency deviations,voltage fluctuations,and poor reactive power coordination,posing serious challenges to grid stability.Conventional Interconnection FlowControllers(IFCs)primarily regulate active power flowand fail to effectively handle dynamic frequency variations or reactive power sharing in multi-microgrid networks.To overcome these limitations,this study proposes an enhanced Interconnection Flow Controller(e-IFC)that integrates frequency response balancing and an Interconnection Reactive Power Flow Controller(IRFC)within a unified adaptive control structure.The proposed e-IFC is implemented and analyzed in DIgSILENT PowerFactory to evaluate its performance under various grid disturbances,including frequency drops,load changes,and reactive power fluctuations.Simulation results reveal that the e-IFC achieves 27.4% higher active power sharing accuracy,19.6% lower reactive power deviation,and 18.2% improved frequency stability compared to the conventional IFC.The adaptive controller ensures seamless transitions between grid-connected and islanded modes and maintains stable operation even under communication delays and data noise.Overall,the proposed e-IFCsignificantly enhances active-reactive power coordination and dynamic stability in renewable-integrated multi-microgrid systems.Future research will focus on coupling the e-IFC with tertiary-level optimization frameworks and conducting hardware-in-the-loop validation to enable its application in large-scale smart microgrid environments.
基金Sponsored by the National Natural Science Foundation of China(Grant No.61302080)the National High Technology Research and Development Program of China(Grant No.2014AA01A705)
文摘The orthogonal frequency division multiple access( OFDMA) based communication system has been considered as the main trend of next-Generation communication system. But the existing resource allocation algorithm designed for such system is always with high complexity thus hard to be realized. To solve such problem with the constraints of spectrum efficiency and buffer state,a novel cross-layer resource allocation algorithm( RAA) is proposed in this paper. The goal of our RAA is to maximize the system throughput while satisfying several practical constraints,such as fairness among services,head of line( Ho L) delay and diverse quality of service( Qo S) requirements. Due to these constraints,finding the optimal solution becomes a NPhard problem. Therefore in this paper a novel method to solve such problem with acceptable complexity is proposed within following steps: firstly,based on the link state we formulate the ideal subchannel allocation strategy as a convex optimization problem,which can be efficiently solved by our proposed lagrange multiplier technique subchannel allocation( LMTSA) algorithm; secondly,according to the obtained channel allocation matrix,a power allocation algorithm based on the water-filling power allocation( WPA) idea is deployed to get the optimal power allocation matrix combining with adaptive modulation and coding( AMC); finally,through a greedy algorithm,the ultimate subchannel and power allocation matrix can be obtained based on iterative method. The simulation results illustrate that we can achieve the higher throughput and better Qo S performance than the widely-used maximum throughput( MT) algorithm and round robin( RR) algorithm.
基金supported by the Program for Changjiang Scholars and Innovative Research Team in University under Grant No.IRT1078the Key Program of NSFC-Guangdong Union Foundation under Grant No.U1135002+1 种基金Major National S&T Program under Grant No.2011ZX03005-002the Fundamental Research Funds for the Central Universities under Grant No.JY10000903001
文摘Wireless Mesh Networks （WMNs） are vulnerable to various security threats because of their special infrastructure and communication mode, wherein insider attacks are the most challenging issue. To address this problem and protect innocent users from malicious attacks, it is important to encourage cooperation and deter malicious behaviors. Reputation systems constitute a major category of techniques used for managing trust in distributed networks, and they are effective in characterizing and quantifying a node＇s behavior for WMNs. However, conventional layered reputation mechanisms ignore several key factors of reputation in other layers; therefore, they cannot provide optimal performance and accurate malicious node identification and isolation for WMNs. In this paper, we propose a novel dynamic reputation mechanism, SLCRM, which couples reputation systems with a cross-layer design and node-security-rating classification techniques to dynamically detect and restrict insider attacks. Simulation results show that in terms of network throughput, packet delivery ratio, malicious nodes＇ identification, and success rates, SI_CRM imple- ments security protection against insider attacks in a more dynamic, effective, and efficient manner than the subjective logic and uncertainty-based reputation model and the familiarity-based reputation model.
基金supported by the National Natural Science Foundation of China under Grant No.61271281the National High Technology Research and Development Program of China (863 Program) under Grant No.SS2013AA010503
文摘To improve the robustness of the Low Earth Orbit(LEO) satellites networks and realise load balancing, a Cross-layer design and Ant-colony optimization based Load-balancing routing algorithm for LEO Satellite Networks(CAL-LSN) is proposed in this paper. In CALLSN, mobile agents are used to gather routing information actively. CAL-LSN can utilise the information of the physical layer to make routing decision during the route construction phase. In order to achieve load balancing, CALLSN makes use of a multi-objective optimization model. Meanwhile, how to take the value of some key parameters is discussed while designing the algorithm so as to improve the reliability. The performance is measured by the packet delivery rate, the end-to-end delay, the link utilization and delay jitter. Simulation results show that CAL-LSN performs well in balancing traffic load and increasing the packet delivery rate. Meanwhile, the end-to-end delay and delay jitter performance can meet the requirement of video transmission.
基金Supported by National Natural Science Foundation of China(No.90604013)Natural Science Foundation of Tianjin(No.08JCYBJC14200)National High Technology Research and Development Program("863"Program)of China(No.2007AA01Z220)
文摘Since most ad hoc mobile devices today operate on batteries,the power consumption becomes an important issue.This paper proposes a cross-layer design of energy-aware ad hoc on-demand distance vector(CEAODV) routing protocol which adopts cross-layer mechanism and energy-aware metric to improve AODV routing protocol to reduce the energy consumption and then prolong the life of the whole network.In CEAODV,the link layer and the routing layer work together to choose the optimized transmission power for nodes and the route for packets.The link layer provides the energy consumption information for the routing layer and the routing layer chooses route accordingly and conversely controls the link layer to adjust the transmission power.The simulation result shows that CEAODV can outperform AODV to save more energy.It can reduce the consumed energy by about 8%over traditional energy-aware algorithm.And the performance is better when the traffic load is higher in the network.
基金supported by the National Natural Science Foundation of China (No.61101125)
文摘According to large coverage of satellites, there are various channel states in a satellite broadcasting network. In order to introduce an efficient rateless transmission method to satellite multimedia broadcasting/multicast services with finite-length packets, a cross-layer packet transmission method is proposed with Luby transform （LT） codes for efficiency in the network layer and low density parity check （LDPC） codes for reliability in the physical layer jointly. The codewords generated from an LT encoder are divided into finite-length packets, which are encoded by an LDPC encoder subsequently. Based on noise and fading effects of satellite channels, the LT packets received from an LDPC decoder either have no error or are marked as erased, which can be mod- eled as a binary erasure channels （BECs）. By theoretical analysis on LT parameters and LDPC parameters, the relationships between LDPC code rates in the physical layer and LT codes word lengths in the network layer are investigated. With tradeoffs between the LT codes word lengths and the LDPC code rates, optimized cross-layer solutions are achieved with a binary search algorithm. Verified by simulations, the proposed solution for cross-layer parameters design can provide the best transmission mode according to satellite states, so as to improve throughput performance for satellite multimedia transmission.
基金Supported by the National Natural Science Foundation of China(51874328,52074311,U1762215,U19B6003-05)China National Petroleum Corporation-China University of Petroleum(Beijing)Strategic Cooperation Science and Technology Project(ZLZX2020-02)。
文摘Triaxial fracturing modeling experiments were carried out on whole diameter shale cores from different layers of Shahejie Formation in the Dongpu sag,Bohai Bay Basin to find out the vertical propagation shapes of hydraulic fractures in different reservoirs.A numerical simulation method of inserting global cohesive elements was adopted to build a pseudo-three-dimension fracture propagation model for multiple shale oil reservoirs considering interface strength,perforation location,and pump rate to research the features of hydraulic fracture(HF)penetrating through layers.The hydraulic fracture propagates in a cross pattern in tight sandstone layers,in a straight line in sandstone layers with natural fractures,forms ladder fracture in shale layers with beddings.The hydraulic fracture propagates in a stripe shape vertically in both sandstone and shale layers,but it spreads in the plane in shale layers after connecting beddings.Restricted by beddings,the hydraulic fractures in shale layers are smaller in height than those in sandstone layers.When a sandstone layer and a shale layer are fractured at the same time,the fracture extends the most in height after the two layers are connected.Perforating at positions where the sandstone-shale interface is higher in strength and increasing the pumping rate can enhance the fracture height,thus achieving the goal of increasing the production by cross-layer fracturing in multiple shale oil layers.
文摘With correlating with human perception, quality of experience(Qo E) is also an important measurement in evaluation of video quality in addition to quality of service(Qo S). A cross-layer scheme based on Lyapunov optimization framework for H.264/AVC video streaming over wireless Ad hoc networks is proposed, with increasing both Qo E and Qo S performances. Different from existing works, this scheme routes and schedules video packets according to the statuses of the frame buffers at the destination nodes to reduce buffer underflows and to increase video playout continuity. The waiting time of head-ofline packets of data queues are considered in routing and scheduling to reduce the average end-to-end delay of video sessions. Different types of packets are allocated with different priorities according to their generated rates under H.264/AVC. To reduce the computational complexity, a distributed media access control policy and a power control algorithm cooperating with the media access policy are proposed. Simulation results show that, compared with existing schemes, this scheme can improve both the Qo S and Qo E performances. The average peak signal-to-noise ratio(PSNR) of the received video streams is also increased.
基金supported in part by the National Natural Science Foundation of China (No. 61971220)the Fundamental Research Funds for the Central Universities of Nanjing University of Aeronautics and Astronautics(NUAA)(No.kfjj20200414)Natural Science Foundation of Jiangsu Province in China (No. BK20181289)。
文摘The performance of uplink distributed massive multiple-input multiple-output(MIMO)systems with crosslayer design(CLD) is investigated over Rayleigh fading channel, which combines the discrete rate adaptive modulation with truncated automatic repeat request. By means of the performance analysis, the closed-form expressions of average packet error rate(APER)and overall average spectral efficiency(ASE)of distributed massive MIMO systems with CLD are derived based on the conditional probability density function of each user’s approximate effective signal-to-noise ratio(SNR)and the switching thresholds under the target packet loss rate(PLR)constraint.With these results,using the approximation of complementary error functions,the approximate APER and overall ASE are also deduced. Simulation results illustrate that the obtained theoretical ASE and APER can match the corresponding simulations well. Besides,the target PLR requirement is satisfied,and the distributed massive MIMO systems offer an obvious performance gain over the co-located massive MIMO systems.
基金supported by the National Natural Science Foundation of China(No.61675033,61575026,61675233)National High Technical Research and Development Program of China(No.2015AA015504)
文摘This paper introduces an ant colony routing and wavelength assignment algorithm based on cross-layer design(CL-ACRWA),which can overcome the adverse effects of Doppler wavelength shift on data transmission in optical satellite networks. Firstly, a cross-layer optimization model is built, which considers the Doppler wavelength shift, the transmission delay as well as wavelength-continuity constraint. Then an ant colony algorithm is utilized to solve the cross-layer optimization model, resulting in finding an optimal light path satisfying the above constraints for every connection request. The performance of CL-ACRWA is measured by the communication success probability, the convergence property and the transmission delay. Simulation results show that CL-ACRWA performs well in communication success probability and has good global search ability as well as fast convergence speed. Meanwhile, the transmission delay can meet the basic requirement of real-time transmission of business.
基金supported in part by the National Natural Science Foundation of China under Grant 62006071part by the Science and Technology Research Project of Henan Province under Grant 232103810086.
文摘In recent years,there has been extensive research on object detection methods applied to optical remote sensing images utilizing convolutional neural networks.Despite these efforts,the detection of small objects in remote sensing remains a formidable challenge.The deep network structure will bring about the loss of object features,resulting in the loss of object features and the near elimination of some subtle features associated with small objects in deep layers.Additionally,the features of small objects are susceptible to interference from background features contained within the image,leading to a decline in detection accuracy.Moreover,the sensitivity of small objects to the bounding box perturbation further increases the detection difficulty.In this paper,we introduce a novel approach,Cross-Layer Fusion and Weighted Receptive Field-based YOLO(CAW-YOLO),specifically designed for small object detection in remote sensing.To address feature loss in deep layers,we have devised a cross-layer attention fusion module.Background noise is effectively filtered through the incorporation of Bi-Level Routing Attention(BRA).To enhance the model’s capacity to perceive multi-scale objects,particularly small-scale objects,we introduce a weightedmulti-receptive field atrous spatial pyramid poolingmodule.Furthermore,wemitigate the sensitivity arising from bounding box perturbation by incorporating the joint Normalized Wasserstein Distance(NWD)and Efficient Intersection over Union(EIoU)losses.The efficacy of the proposedmodel in detecting small objects in remote sensing has been validated through experiments conducted on three publicly available datasets.The experimental results unequivocally demonstrate the model’s pronounced advantages in small object detection for remote sensing,surpassing the performance of current mainstream models.
基金Supported by the National High Technology Research and Development Programme of China ( No. 2006AA01Z215)the National Natural Science Foundation of China (No. 60572060+2 种基金 60533110)the National Basic Research Program of China (973)( No. 2006CB303000)the CAS Innovation Proiect (No. KGCX2-YW-110-3)
文摘This paper describes the deployment optimization technology and the cross-layer design of a surveil-lance WSN system applied in relic protection.Facing the typical technical challenges in the applicationcontext of relic protection,we firstly propose a deployment technology based on ant colony optimization al-gorithm(DT-ACO)to overcome the difficulties in communication connectivity and sensing coverage.Meanwhile,DT-ACO minimizes the overall cost of the system as much as possible.Secondly we proposea novel power-aware cross-layer scheme(PACS)to facilitate adjustable system lifetime and surveillanceaccuracy.The performance analysis shows that we achieve lower device cost,significant extension of thesystem lifetime and improvement on the data delivery rate compared with the traditional methods.
基金Supported by the 100 Top-Talents Program of Chinese Academic of Sciences (No. 99M2008M02)
文摘We investigate the problem of how to minimize the energy consumption in multi-hop Wireless Sensor Network (WSN),under the constraint of end-to-end reliability Quality of Seervice (QoS) requirement.Based on the investigation,we jointly consider the routing,relay selection and power allocation algorithm,and present a novel distributed cross-layer strategy using opportunistic relaying scheme for cooperative communication.The results show that under the same QoS requirement,the proposed cross-layer strategy performs better than other cross-layer cooperative communication algorithms in energy efficiency.We also investigated the impact of several parameters on the energy efficiency of the cooperative communication in WSNs,thus can be used to provide guidelines to decide when and how to apply cooperation for a given setup.
基金supported by Institute of Information & communications Technology Planning & Evaluation (IITP) grant funded by the Korea government(MSIT) (No.RS-2022-00155885, Artificial Intelligence Convergence Innovation Human Resources Development (Hanyang University ERICA))supported by the National Natural Science Foundation of China under Grant No. 61971264the National Natural Science Foundation of China/Research Grants Council Collaborative Research Scheme under Grant No. 62261160390
文摘Due to the fading characteristics of wireless channels and the burstiness of data traffic,how to deal with congestion in Ad-hoc networks with effective algorithms is still open and challenging.In this paper,we focus on enabling congestion control to minimize network transmission delays through flexible power control.To effectively solve the congestion problem,we propose a distributed cross-layer scheduling algorithm,which is empowered by graph-based multi-agent deep reinforcement learning.The transmit power is adaptively adjusted in real-time by our algorithm based only on local information(i.e.,channel state information and queue length)and local communication(i.e.,information exchanged with neighbors).Moreover,the training complexity of the algorithm is low due to the regional cooperation based on the graph attention network.In the evaluation,we show that our algorithm can reduce the transmission delay of data flow under severe signal interference and drastically changing channel states,and demonstrate the adaptability and stability in different topologies.The method is general and can be extended to various types of topologies.
