The synthesis method of propargylamines has always been the focus of research in organic synthetic methodology.A method of alkynylation of tertiary aliphatic amines with alkynes in the presence of copper doped zeolite...The synthesis method of propargylamines has always been the focus of research in organic synthetic methodology.A method of alkynylation of tertiary aliphatic amines with alkynes in the presence of copper doped zeolite Y as a catalyst and oxygen in the air as an oxidant has been developed.The most important feature of this reaction is that copper molecular siolite is used as catalyst,which avoids the intermolecular self-coupling of alkynes,and thus realizes the high efficiency propargylization of alkyl tertiary amines.展开更多
This paper deals with the modeling and cross-coupling effect analysis in double-input Boost converters with multiplex current control. A ripple-based multiplex current controlled matrix model is proposed to restore th...This paper deals with the modeling and cross-coupling effect analysis in double-input Boost converters with multiplex current control. A ripple-based multiplex current controlled matrix model is proposed to restore the system's high-frequency domain dynamics information and resolve the coexistence problem of the sample-and-hold effect in multiplex current controllers, which significantly improves the resolution of the conventional average model. Based on the proposed model, both sub-harmonic and low-frequency oscillations are identified in terms of stability analysis, and the inherent mechanism of these complicated nonlinear dynamic behavior is revealed, which not only illustrates the origin of the oscillations but also points out the dominant factors in diverse types of instability situation. Besides, cross-coupling effect analysis is performed to study the interaction between the input ports with the help of the Gershgorin band, and the mechanism of the special unbalanced oscillation phenomenon is revealed. Furthermore, the sensitivity analysis approach is used to identify the key parameters with respect to the cross-coupling effect, which provides more design-oriented knowledge for practical engineering. In addition, the benefits of the proposed model are further illustrated through a comparative analysis. Finally, these theoretical results are verified by experimental ones. These results are beneficial to the improvement of performance as well as the understanding of the cross-coupling effect of multi-input converters.展开更多
A chromium(II)-catalyzed reduction cross coupling reaction was reported.This reaction utilizes inexpensive and readily available chromium dichloride as a catalyst and 4,4'-di-tert-butyl-bipyridine as a ligand to a...A chromium(II)-catalyzed reduction cross coupling reaction was reported.This reaction utilizes inexpensive and readily available chromium dichloride as a catalyst and 4,4'-di-tert-butyl-bipyridine as a ligand to achieve reduction cross coupling between trifluoromethyl olefins and alkyl bromides under mild conditions,effectively synthesizing difluoroalkene derivatives.This reaction exhibits good substrate universality and is compatible with multiple important functional groups,providing a concise synthetic pathway for constructing conjugated difluoroalkenes containing allyl difluoromethylene structural units.Preliminary mechanistic experiments indicate that alkyl bromides first undergo a reduction process to generate corresponding alkyl radicals,followed by addition to trifluoromethyl olefins.After binding with Cr(II),they undergo aβ-fluorine elimination process to generate difluoroalkenes.展开更多
Chiral carbonyl compounds frequently occur in natural products and pharmaceuticals. Additionally, they serve as important intermediates in organic synthesis. Transition metal-catalyzed asymmetric carbonylative cross-c...Chiral carbonyl compounds frequently occur in natural products and pharmaceuticals. Additionally, they serve as important intermediates in organic synthesis. Transition metal-catalyzed asymmetric carbonylative cross-coupling reactions are among the most straightforward and effective methods for synthesizing chiral carbonyl compounds, including esters, amides, and ketones. The advances in asymmetric carbonylative cross-coupling reactions using various O-, N-, C-, and S-containing nucleophiles or electrophiles over the past decade are summarized.展开更多
A signifcant challenge in the progress and development of Building-Integrated-Photovoltaic(B-I-PV)systems is concerned with the extraction of maximum power from PV modules.The PV system archtecture is an essential fea...A signifcant challenge in the progress and development of Building-Integrated-Photovoltaic(B-I-PV)systems is concerned with the extraction of maximum power from PV modules.The PV system archtecture is an essential feature to extract the maximum power.The conventional PV-centralinverter architecture consists of various connections among the PV modules,which are sensitive to shading effects and pro-duces mismatching power loss under partial shading conditions(PSCs),Hence,photovoltaic-distributed-maximum power point tracking(PV-D-MPPT)architecture has been proposed to extract the maximum power.In.PV-1 D-MPPT architecture,the output terminals of DC-DC converters are connected either in series or parallel configuration.The main limitation of the series configuration in open-loop MPPT control is the crosscoupling effect.Because of cross-coupling effects,the maximum-power-point(M-P-P)operation of shaded PV modules is lost under PSCs.The lost in M-P-P operation of shaded PV module also affects the unshaded modules M-P-P operation.Under crosscoupling ffeets,the DC-DC converters are consuming the power instead of delivering to the load.Despite the research activity,there are hardly any papers presenting a clear,comprehensive and mathematical analysis on the existence of cross-couplings in PV string-integrated-converters(S-1-Cs).This article presents a mathematical analysis and also explains the conditions for the existent of cross-coupling ffeets.The experimental results also validate with the mathematically analysed results.This article also discusses the modeling of the two-diode model of PV module,design of boost type S-1C,and the Perturb and Observe(P&O)MPPT algorithm implementation.展开更多
Selective defluorinative functionalization of trifluoromethylarenes(ArCF3)to obtain the pharmaceutically commonα,α-difluorobenzylic motif is an attractive and elegant synthetic route.Over the past decade,although C(...Selective defluorinative functionalization of trifluoromethylarenes(ArCF3)to obtain the pharmaceutically commonα,α-difluorobenzylic motif is an attractive and elegant synthetic route.Over the past decade,although C(sp^(3))-F bonds functionalization have been greatly developed,catalytic cross-coupling of trifluoromethylarenes with C-H of terminal alkynes remains a challenge.Here,we report an approach to achieve Sonogashira-type cross-coupling of trifluoromethylarenes with terminal alkynes C(sp)-H bonds via photoredox and Cu/L dual catalysis.Tridentate anionic ligand is pivotal to realize this C-H sp-sp^(3) cross-coupling.Moreover,this unique catalytic system is also suitable for cross-coupling of C(sp^(3))-F bonds with azoles C(sp^(2))-H bonds.A series of trifluoromethylarenes,terminal alkynes and azoles with various functional groups are compatible with this protocol affording a variety of defluoroalkynylation or defluoroazolation products.Preliminary mechanistic studies indicated that deprotonated BINOL involved as a photocatalyst to activate ArCF3 rather than a ligand to the metal.展开更多
In most Suzuki–Miyaura carbon-carbon cross-coupling reactions,the borabicyclo[3.3.1]nonane scaffold(9-BBN)only serves as an auxiliary facilitating the transmetalation step and thus is transformed into by-products.The...In most Suzuki–Miyaura carbon-carbon cross-coupling reactions,the borabicyclo[3.3.1]nonane scaffold(9-BBN)only serves as an auxiliary facilitating the transmetalation step and thus is transformed into by-products.There are rare examples where the 9-BBN derivatives serve as the potentially diverse C8 building blocks in cross-coupling reactions.Herein,we report a cobalt-catalyzed migratory carboncarbon cross-coupling reaction of the in situ formed 9-BBN ate complexes to afford diverse aryl-and alkyl-functionalized cyclooctenes.Preliminary mechanistic studies suggest the oxidation-induced cisbicyclo[3.3.0]oct-1-ylborane is the key intermediate in this migratory cross-coupling reaction,which promotes the development of other diverse migratory cross-coupling of borate complexes.展开更多
The switchable cross-coupling of indoles and pyridotriazoles through carbene insertion at C_(2)-or C_(3)-positon has been developed in this paper.This highly site-selective C-H carbenoid functionalization is determine...The switchable cross-coupling of indoles and pyridotriazoles through carbene insertion at C_(2)-or C_(3)-positon has been developed in this paper.This highly site-selective C-H carbenoid functionalization is determined by both the Rh-catalyst species and auxiliary groups.[Cp∗RhCl_(2)]_(2) and coordinating pyrimidyl group direct the C-H carbenoid functionalization to occur at the C_(2)-position,while Rh2OAc4 and noncoordinating benzyl group lead the reaction to occur at the C_(3)-position of the indoles.This regioselective C−H functionalization strategy is of significant importance for the discovery of indole drugs.展开更多
An N-heterocyclic carbene(NHC)catalyzed enantioselective cyclisation and trifluoromethylation of olefins with cinnamaldehydes via radical relay cross-coupling in the presence of Togni reagent is reported andδ-lactone...An N-heterocyclic carbene(NHC)catalyzed enantioselective cyclisation and trifluoromethylation of olefins with cinnamaldehydes via radical relay cross-coupling in the presence of Togni reagent is reported andδ-lactones tolerated with stereogenic centers atβ-andγ-positions are obtained in moderate to high yields and with high enantioselectivities.Further computational studies explain that the radical crosscoupling step is the key to determining the enantioselectivity.Energy analysis of key transition states and intermediates also provides a reasonable explanation for the difficulty of diastereoselective control.DFT calculations also reveal that the hydrogen-bonding interaction plays a vital role in the promotion of this chemistry.展开更多
The Pd-catalyzed Suzuki-Miyaura coupling reaction is a crucial tool for constructing C-C bonds.Currently,the organic solvents employed during reaction may cause serious environmental problems.Moreover,the low solubili...The Pd-catalyzed Suzuki-Miyaura coupling reaction is a crucial tool for constructing C-C bonds.Currently,the organic solvents employed during reaction may cause serious environmental problems.Moreover,the low solubility of inorganic bases in organic solvents leads to enormous mass transfer resistance.To address this issue,the Pickering droplets reactor stabilized by Pd/g-C_(3)N_(4)at substrate-water two-phase interface is reported.Benefiting from the hydrophobic conjugated framework and hydrophilic terminal groups,Pd/g-C_(3)N_(4)can configure stable Pickering emulsion without additional functionalization.The Pd loaded catalysts exhibits excellent performance(TOF=21852 h^(-1))for the Suzuki-Miyaura coupling reaction,which is deriving from unique electronic structure of g-C_(3)N_(4)and high interfacial area of emulsion.Moreover,there is no clear decrease in reactivity after six cycles(conversion>86%).In this study,the organic solvent was replaced by reaction substrate,and the high activity can be achieved for various halogenated aromatic hydrocarbons and their derivatives.展开更多
The use of thallium(I) hydroxide (TlOH) as a base is known to extremely accelerate the Suzuki-Miyaura cross-coupling reaction using organoboronic acid or organoboronic acid ester as a substrate. Here, we investigated ...The use of thallium(I) hydroxide (TlOH) as a base is known to extremely accelerate the Suzuki-Miyaura cross-coupling reaction using organoboronic acid or organoboronic acid ester as a substrate. Here, we investigated the effects of TlOH by comparing with other conventional bases such as KOH, K2CO3, and CsF for Pd0-mediated rapid cross-coupling reactions between CH3I and organoborane reagents, such as phenyl-, (Z)-4-benzyloxy-2-butenyl-, and benzylboronic acid pinacol esters under the conditions CH3I/borane/Pd0/base (1:40:1:3) in THF/H2O or DMF/H2O for 5 min with an aim to fabricate a PET tracer efficiently. Consequently, however, the use of TlOH was much less efficient than the other bases for the acceleration of cross-coupling reactions. Thus, it was reconfirmed that the milder and non-toxic conditions using K2CO3 or CsF so far developed by our group were most appropriate for the rapid C-methylations.展开更多
Herein,3‑aminopropyltriethoxysilane(APTES)was used to modify F‑containing silica slag(SS)by simple grafting and served as a multifunctional barrier layer.The amino group(—NH2)in the amino‑modified SS(NH2‑SS)forms lig...Herein,3‑aminopropyltriethoxysilane(APTES)was used to modify F‑containing silica slag(SS)by simple grafting and served as a multifunctional barrier layer.The amino group(—NH2)in the amino‑modified SS(NH2‑SS)forms ligand bonds or hydrogen bonds with sulfur ions in lithium polysulfides(LiPSs),thus inhibiting the shuttle effect.Electrochemical analyses demonstrated that lithium‑sulfur(Li‑S)batteries employing the NH2‑SS interlayer exhibited discharge specific capacities of 1048 and 789 mAh·g^(-1) at 0.2C and 2C,respectively,and even at 4C,the initial discharge specific capacity remained at 590 mAh·g^(-1),outperforming the Li‑S battery with unmodified SS as the interlayer.展开更多
The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF...The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.展开更多
Agglomeration supports the high-quality development of the manufacturing industry,and its associated resource and environmental effects play a crucial role in driving green economic development.Based on data from pref...Agglomeration supports the high-quality development of the manufacturing industry,and its associated resource and environmental effects play a crucial role in driving green economic development.Based on data from prefecture-level cities in China from 2005 to 2019,this study employs the inverse distance weighting method,the bivariate local indicator of spatial association model,the spatial Durbin model,and other techniques to explore the relationship between manufacturing agglomeration and PM_(2.5)concentrations,and to assess the impact of its manufacturing agglomeration.Four correlation patterns are observed:high-high,low-low,high-low,and low-high.Among these,high-high and low-low patterns dominate in terms of number of cities.These correlation patterns demonstrate strong temporal stability,with a clear“Matthew effect”.The effect of manufacturing agglomeration on PM_(2.5)levels is significantly negative and helps reduce concentrations regionally,indicating the need to further enhance agglomeration levels regionally.However,it can increase PM_(2.5)levels in neighboring areas due to a siphon effect,and the impact of varies across regions.Compared with levels in 2005-2013,the significance of the relationship between manufacturing agglomeration and PM_(2.5)weakened in the 2013-2019 period.Accordingly,this study proposes countermeasures and policy recommendations aimed at strengthening regional collaborative governance and inspiring differentiated agglomeration strategies to support sustainable economic development in China.展开更多
Chitosan(CTS)was grafted onto the surface of amino‑functionalized silver chloride silicon dioxide(AgCl@SiO_(2)‑NH_(2))cores to obtain AgCl@SiO_(2)/CTS hybrid nanoparticles.The as‑obtained AgCl@SiO_(2)/CTS nanoparticle...Chitosan(CTS)was grafted onto the surface of amino‑functionalized silver chloride silicon dioxide(AgCl@SiO_(2)‑NH_(2))cores to obtain AgCl@SiO_(2)/CTS hybrid nanoparticles.The as‑obtained AgCl@SiO_(2)/CTS nanoparticles were chlorinated by NaClO solution to get AgCl@SiO_(2)/CTS‑based chloramine nano‑hybrid materials,denoted as AgCl@SiO_(2)/CTS‑Cl.A transmission electron microscope was used to observe the morphology of the as‑prepared samples AgCl@SiO_(2)/CTS and AgCl@SiO_(2)/CTS‑Cl.At the same time,an X‑ray diffractometer and an infrared spectroscope were utilized to characterize their crystal and chemical structures.Besides,ζpotentials were measured to elucidate the surface modification of AgCl nanoparticles by—NH_(2),the antibacterial mechanism of AgCl@SiO_(2)/CTS‑Cl was investigated by scanning electron microscopy,and Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)were used as the to‑be‑tested strains to evaluate the antimicrobial activity of samples AgCl@SiO_(2)/CTS and AgCl@SiO_(2)/CTS‑Cl.Findings demonstrate that sample AgCl@SiO_(2)/CTS exhibits a chain‑like structure ascribed to the interaction between—NH_(2),and each AgCl@SiO_(2)/CTS hybrid nanoparticle contains several AgCl cores.In the meantime,sample AgCl@SiO_(2)/CTS‑Cl exhibits excellent antibacterial activity against E.coli and S.aureus,which is attributed to the synergistic antibacterial effect of Ag^(+)and Cl^(-).Sample AgCl@SiO_(2)/CTS‑Cl with a dosage of 640.00μg·mL^(-1) could completely kill the two kinds of tested bacteria in 12 h of incubation;it retains a high antibacterial efficiency even after 10 cycles of antibacterial tests.展开更多
Synchronous reluctance motors(SynRM)are widely employed in industrial applications due to their high robustness,low cost,and absence of permanent magnets.In recent years,significant research efforts have focused on im...Synchronous reluctance motors(SynRM)are widely employed in industrial applications due to their high robustness,low cost,and absence of permanent magnets.In recent years,significant research efforts have focused on improving the controllability and efficiency of SynRM.Accurate rotor position information is essential for the controller to generate appropriate current and voltage references corresponding to the desired speed and load torque.Shaft-mounted position sensors are generally undesirable because of their high cost,sensitivity to harsh operating conditions,maintenance requirements,and reduced reliability in environments characterized by high vibration.Consequently,sensorless control techniques that estimate rotor position using measured stator currents and voltages have attracted increasing attention.However,magnetic saturation,parameter nonlinearities,and cross-coupling effects significantly degrade position estimation accuracy and may compromise the stability of sensorless SynRM drives.In this paper,a nonlinear SynRM model is developed using finite element analysis(FEA)to accurately capture magnetic saturation and cross-coupling effects,thereby providing a precise representation of the machine’s electromagnetic behavior under varying load and flux conditions.A series of magnetostatic FEA simulations is performed.To reduce computational complexity,only one motor pole is analyzed by applying anti-periodic boundary conditions along the domain sides and enforcing a zero magnetic vector potential on the external stator boundary.Nonlinear iron material properties are modeled using the appropriate B-H curve.The simulations are carried out by imposing d-and q-axis current components and computing the corresponding flux linkages and electromagnetic torque.Based on these results,both apparent and incremental inductances are extracted and incorporated into the control algorithm.An advanced fictitious flux linkage method combined with a phase-locked loop(PLL)is employed for accurate rotor position estimation.Simulation results confirm that the proposed sensorless control strategy ensures stable operation and high position estimation accuracy over the entire speed range.展开更多
Rechargeable Zn/Sn-air batteries have received considerable attention as promising energy storage devices.However,the electrochemical performance of these batteries is significantly constrained by the sluggish electro...Rechargeable Zn/Sn-air batteries have received considerable attention as promising energy storage devices.However,the electrochemical performance of these batteries is significantly constrained by the sluggish electrocatalytic reaction kinetics at the cathode.The integration of light energy into Zn/Sn-air batteries is a promising strategy for enhancing their performance.However,the photothermal and photoelectric effects generate heat in the battery under prolonged solar irradiation,leading to air cathode instability.This paper presents the first design and synthesis of Ni_(2)-1,5-diamino-4,8-dihydroxyanthraquinone(Ni_(2)DDA),an electronically conductiveπ-d conjugated metal-organic framework(MOF).Ni_(2)DDA exhibits both photoelectric and photothermal effects,with an optical band gap of~1.14 eV.Under illumination,Ni_(2)DDA achieves excellent oxygen evolution reaction performance(with an overpotential of 245 mV vs.reversible hydrogen electrode at 10 mA cm^(−2))and photothermal stability.These properties result from the synergy between the photoelectric and photothermal effects of Ni_(2)DDA.Upon integration into Zn/Sn-air batteries,Ni_(2)DDA ensures excellent cycling stability under light and exhibits remarkable performance in high-temperature environments up to 80℃.This study experimentally confirms the stable operation of photo-assisted Zn/Sn-air batteries under high-temperature conditions for the first time and provides novel insights into the application of electronically conductive MOFs in photoelectrocatalysis and photothermal catalysis.展开更多
The efficient electrocatalytic oxidation of glycerol(GLY)is one of the most promising routes for the valorization of GLY.Doping has emerged as a powerful strategy to tailor the electrocatalytic performance of silver n...The efficient electrocatalytic oxidation of glycerol(GLY)is one of the most promising routes for the valorization of GLY.Doping has emerged as a powerful strategy to tailor the electrocatalytic performance of silver nanoclusters(Ag NCs),yet the effects of doping mode(surface vs.core)and the interface environment(e.g.,electrolyte concentration)on the electrocatalytic performance for Ag NCs toward GLY oxidation remain understood.In this work,surface-doped Ag_(4)M_(2)(SR)_(8) and core-doped Ag_(24)M(SR)_(18)(M=Ni,Pd,Pt;SR=SPhMe_(2))NCs were synthesized for electrocatalytic GLY oxidation.The results revealed a strong dependence of selectivity on doping mode and electrolyte concentration:under low KOH concentration,Pd-and Pt-doped Ag_(4)M_(2) NCs exhibited 100%selectivity toward oxalic acid(OA),whereas Pd-and Pt-doped Ag_(24)M NCs delivered>95%selectivity for formic acid(FA).In contrast,under high KOH concentration,Pd-and Pt-doped Ag_(4)M_(2) NCs gave rise to>80%FA,while Pd-and Pt-doped Ag_(24)M NCs produced>45%FA.Mechanism studies indicated that Ni doping predominantly enhanced catalytic activity via lowering the activation barrier of the initial reaction step(GLY→glyceraldehyde),whereas Pd and Pt doping modulated selectivity through reducing the energy barrier of the selective branch step(glyceric acid→OA,OA→FA).High KOH concentration promoted the oxidation by increasing the electrochemical active surface area and facilitating electron transfer of Ag NCs.This study provides clear guidance for designing high-performance Ag-based electrocatalysts for biomass valorization.展开更多
The UV-2600 ultraviolet(UV)spectrophotometer and the UV sunscreen index analyzer SolarLight Model 601 were used to test the UV absorption capacity and the UV damage alleviating effect of commonly used raw materials,an...The UV-2600 ultraviolet(UV)spectrophotometer and the UV sunscreen index analyzer SolarLight Model 601 were used to test the UV absorption capacity and the UV damage alleviating effect of commonly used raw materials,and the Hen’s Egg Test-Chorioallantoic Membrane were also processed to assess the mildness.As a result,bisabolol,pongamia pinnata seed extract,pterocarpus marsupium bark extract and other materials were screened as the effective and gentle sunscreen synergistic ingredients.展开更多
The dried fruit of Forsythia suspensa(Oleaceae),also known as Forsythia,is a traditional Chinese medicinal herb known for its heat-clearing and detoxifying properties.It is used to disperse nodules,reduce swelling,rem...The dried fruit of Forsythia suspensa(Oleaceae),also known as Forsythia,is a traditional Chinese medicinal herb known for its heat-clearing and detoxifying properties.It is used to disperse nodules,reduce swelling,remove toxins,clear heat,and alleviate wind-heat syndromes.It also has hepatoprotective,anti-inflammatory,antiviral,antibacterial,anticancer,antioxidant,antiaging,and anti-obesity effects,as well as potential therapeutic effects on Alzheimer’s disease and diabetic nephropathy.It is used to treat scrofula,mastitis,wind-heat common cold,and other ailments.The review summarizes the chemical constituents and pharmacological effects of F.suspensa,aiming to provide a scientific foundation for its future development,research,and clinical utilization.展开更多
文摘The synthesis method of propargylamines has always been the focus of research in organic synthetic methodology.A method of alkynylation of tertiary aliphatic amines with alkynes in the presence of copper doped zeolite Y as a catalyst and oxygen in the air as an oxidant has been developed.The most important feature of this reaction is that copper molecular siolite is used as catalyst,which avoids the intermolecular self-coupling of alkynes,and thus realizes the high efficiency propargylization of alkyl tertiary amines.
基金supported by the Natural Science Basic Research Plan in Shaanxi Province of China (Grant No. 2021JM-014)the National Natural Science Foundation of China (Grant No. 51577141)。
文摘This paper deals with the modeling and cross-coupling effect analysis in double-input Boost converters with multiplex current control. A ripple-based multiplex current controlled matrix model is proposed to restore the system's high-frequency domain dynamics information and resolve the coexistence problem of the sample-and-hold effect in multiplex current controllers, which significantly improves the resolution of the conventional average model. Based on the proposed model, both sub-harmonic and low-frequency oscillations are identified in terms of stability analysis, and the inherent mechanism of these complicated nonlinear dynamic behavior is revealed, which not only illustrates the origin of the oscillations but also points out the dominant factors in diverse types of instability situation. Besides, cross-coupling effect analysis is performed to study the interaction between the input ports with the help of the Gershgorin band, and the mechanism of the special unbalanced oscillation phenomenon is revealed. Furthermore, the sensitivity analysis approach is used to identify the key parameters with respect to the cross-coupling effect, which provides more design-oriented knowledge for practical engineering. In addition, the benefits of the proposed model are further illustrated through a comparative analysis. Finally, these theoretical results are verified by experimental ones. These results are beneficial to the improvement of performance as well as the understanding of the cross-coupling effect of multi-input converters.
文摘A chromium(II)-catalyzed reduction cross coupling reaction was reported.This reaction utilizes inexpensive and readily available chromium dichloride as a catalyst and 4,4'-di-tert-butyl-bipyridine as a ligand to achieve reduction cross coupling between trifluoromethyl olefins and alkyl bromides under mild conditions,effectively synthesizing difluoroalkene derivatives.This reaction exhibits good substrate universality and is compatible with multiple important functional groups,providing a concise synthetic pathway for constructing conjugated difluoroalkenes containing allyl difluoromethylene structural units.Preliminary mechanistic experiments indicate that alkyl bromides first undergo a reduction process to generate corresponding alkyl radicals,followed by addition to trifluoromethyl olefins.After binding with Cr(II),they undergo aβ-fluorine elimination process to generate difluoroalkenes.
文摘Chiral carbonyl compounds frequently occur in natural products and pharmaceuticals. Additionally, they serve as important intermediates in organic synthesis. Transition metal-catalyzed asymmetric carbonylative cross-coupling reactions are among the most straightforward and effective methods for synthesizing chiral carbonyl compounds, including esters, amides, and ketones. The advances in asymmetric carbonylative cross-coupling reactions using various O-, N-, C-, and S-containing nucleophiles or electrophiles over the past decade are summarized.
文摘A signifcant challenge in the progress and development of Building-Integrated-Photovoltaic(B-I-PV)systems is concerned with the extraction of maximum power from PV modules.The PV system archtecture is an essential feature to extract the maximum power.The conventional PV-centralinverter architecture consists of various connections among the PV modules,which are sensitive to shading effects and pro-duces mismatching power loss under partial shading conditions(PSCs),Hence,photovoltaic-distributed-maximum power point tracking(PV-D-MPPT)architecture has been proposed to extract the maximum power.In.PV-1 D-MPPT architecture,the output terminals of DC-DC converters are connected either in series or parallel configuration.The main limitation of the series configuration in open-loop MPPT control is the crosscoupling effect.Because of cross-coupling effects,the maximum-power-point(M-P-P)operation of shaded PV modules is lost under PSCs.The lost in M-P-P operation of shaded PV module also affects the unshaded modules M-P-P operation.Under crosscoupling ffeets,the DC-DC converters are consuming the power instead of delivering to the load.Despite the research activity,there are hardly any papers presenting a clear,comprehensive and mathematical analysis on the existence of cross-couplings in PV string-integrated-converters(S-1-Cs).This article presents a mathematical analysis and also explains the conditions for the existent of cross-coupling ffeets.The experimental results also validate with the mathematically analysed results.This article also discusses the modeling of the two-diode model of PV module,design of boost type S-1C,and the Perturb and Observe(P&O)MPPT algorithm implementation.
基金support of this work by the National Natural Science Foundation of China(Nos.22371307,21971267)the program for Guangdong Introducing Innovative and Entrepreneurial Teams(No.2017ZT07C069).
文摘Selective defluorinative functionalization of trifluoromethylarenes(ArCF3)to obtain the pharmaceutically commonα,α-difluorobenzylic motif is an attractive and elegant synthetic route.Over the past decade,although C(sp^(3))-F bonds functionalization have been greatly developed,catalytic cross-coupling of trifluoromethylarenes with C-H of terminal alkynes remains a challenge.Here,we report an approach to achieve Sonogashira-type cross-coupling of trifluoromethylarenes with terminal alkynes C(sp)-H bonds via photoredox and Cu/L dual catalysis.Tridentate anionic ligand is pivotal to realize this C-H sp-sp^(3) cross-coupling.Moreover,this unique catalytic system is also suitable for cross-coupling of C(sp^(3))-F bonds with azoles C(sp^(2))-H bonds.A series of trifluoromethylarenes,terminal alkynes and azoles with various functional groups are compatible with this protocol affording a variety of defluoroalkynylation or defluoroazolation products.Preliminary mechanistic studies indicated that deprotonated BINOL involved as a photocatalyst to activate ArCF3 rather than a ligand to the metal.
基金supported by the National Natural Science Foundation of China(No.22171046)the Hundred-Talent Project of Fujian(No.50021113)Fuzhou University(No.0480-00489503)。
文摘In most Suzuki–Miyaura carbon-carbon cross-coupling reactions,the borabicyclo[3.3.1]nonane scaffold(9-BBN)only serves as an auxiliary facilitating the transmetalation step and thus is transformed into by-products.There are rare examples where the 9-BBN derivatives serve as the potentially diverse C8 building blocks in cross-coupling reactions.Herein,we report a cobalt-catalyzed migratory carboncarbon cross-coupling reaction of the in situ formed 9-BBN ate complexes to afford diverse aryl-and alkyl-functionalized cyclooctenes.Preliminary mechanistic studies suggest the oxidation-induced cisbicyclo[3.3.0]oct-1-ylborane is the key intermediate in this migratory cross-coupling reaction,which promotes the development of other diverse migratory cross-coupling of borate complexes.
基金CAMS Innovation Fund for Medical Sciences(CIFMS)(Nos.2022-I2M-1-013,2022-I2M-1-014,2022-I2M-2-002).
文摘The switchable cross-coupling of indoles and pyridotriazoles through carbene insertion at C_(2)-or C_(3)-positon has been developed in this paper.This highly site-selective C-H carbenoid functionalization is determined by both the Rh-catalyst species and auxiliary groups.[Cp∗RhCl_(2)]_(2) and coordinating pyrimidyl group direct the C-H carbenoid functionalization to occur at the C_(2)-position,while Rh2OAc4 and noncoordinating benzyl group lead the reaction to occur at the C_(3)-position of the indoles.This regioselective C−H functionalization strategy is of significant importance for the discovery of indole drugs.
基金financial supports for this work are provided by the National Natural Science Foundation of China(Nos.21871160,21672121,22071130)。
文摘An N-heterocyclic carbene(NHC)catalyzed enantioselective cyclisation and trifluoromethylation of olefins with cinnamaldehydes via radical relay cross-coupling in the presence of Togni reagent is reported andδ-lactones tolerated with stereogenic centers atβ-andγ-positions are obtained in moderate to high yields and with high enantioselectivities.Further computational studies explain that the radical crosscoupling step is the key to determining the enantioselectivity.Energy analysis of key transition states and intermediates also provides a reasonable explanation for the difficulty of diastereoselective control.DFT calculations also reveal that the hydrogen-bonding interaction plays a vital role in the promotion of this chemistry.
基金the National Natural Science Foundation of China(22178243).
文摘The Pd-catalyzed Suzuki-Miyaura coupling reaction is a crucial tool for constructing C-C bonds.Currently,the organic solvents employed during reaction may cause serious environmental problems.Moreover,the low solubility of inorganic bases in organic solvents leads to enormous mass transfer resistance.To address this issue,the Pickering droplets reactor stabilized by Pd/g-C_(3)N_(4)at substrate-water two-phase interface is reported.Benefiting from the hydrophobic conjugated framework and hydrophilic terminal groups,Pd/g-C_(3)N_(4)can configure stable Pickering emulsion without additional functionalization.The Pd loaded catalysts exhibits excellent performance(TOF=21852 h^(-1))for the Suzuki-Miyaura coupling reaction,which is deriving from unique electronic structure of g-C_(3)N_(4)and high interfacial area of emulsion.Moreover,there is no clear decrease in reactivity after six cycles(conversion>86%).In this study,the organic solvent was replaced by reaction substrate,and the high activity can be achieved for various halogenated aromatic hydrocarbons and their derivatives.
文摘The use of thallium(I) hydroxide (TlOH) as a base is known to extremely accelerate the Suzuki-Miyaura cross-coupling reaction using organoboronic acid or organoboronic acid ester as a substrate. Here, we investigated the effects of TlOH by comparing with other conventional bases such as KOH, K2CO3, and CsF for Pd0-mediated rapid cross-coupling reactions between CH3I and organoborane reagents, such as phenyl-, (Z)-4-benzyloxy-2-butenyl-, and benzylboronic acid pinacol esters under the conditions CH3I/borane/Pd0/base (1:40:1:3) in THF/H2O or DMF/H2O for 5 min with an aim to fabricate a PET tracer efficiently. Consequently, however, the use of TlOH was much less efficient than the other bases for the acceleration of cross-coupling reactions. Thus, it was reconfirmed that the milder and non-toxic conditions using K2CO3 or CsF so far developed by our group were most appropriate for the rapid C-methylations.
文摘Herein,3‑aminopropyltriethoxysilane(APTES)was used to modify F‑containing silica slag(SS)by simple grafting and served as a multifunctional barrier layer.The amino group(—NH2)in the amino‑modified SS(NH2‑SS)forms ligand bonds or hydrogen bonds with sulfur ions in lithium polysulfides(LiPSs),thus inhibiting the shuttle effect.Electrochemical analyses demonstrated that lithium‑sulfur(Li‑S)batteries employing the NH2‑SS interlayer exhibited discharge specific capacities of 1048 and 789 mAh·g^(-1) at 0.2C and 2C,respectively,and even at 4C,the initial discharge specific capacity remained at 590 mAh·g^(-1),outperforming the Li‑S battery with unmodified SS as the interlayer.
基金National Natural Science Foundation of China(11875039)Shanxi Scholarship Council of China(2023-033)+2 种基金Fundamental Research Program of Shanxi Province(202303021221071)China Baowu Low Carbon Metallurgical Innovation Foundation(2022)2023 Anhui Major Industrial Innovation Plan Project。
文摘The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.
基金supported by the National Natural Science Foundation of China“Research on the Multi-scale Regional Industrial Spatial Evolution Mechanism,Resource and Environmental Effects,and Green Transformation in the Yellow River Basin”[Grant No.42371194]Taishan Scholar Foundation of Shandong Province[Grant Nos.tsqn202408148 and tstp20240821].
文摘Agglomeration supports the high-quality development of the manufacturing industry,and its associated resource and environmental effects play a crucial role in driving green economic development.Based on data from prefecture-level cities in China from 2005 to 2019,this study employs the inverse distance weighting method,the bivariate local indicator of spatial association model,the spatial Durbin model,and other techniques to explore the relationship between manufacturing agglomeration and PM_(2.5)concentrations,and to assess the impact of its manufacturing agglomeration.Four correlation patterns are observed:high-high,low-low,high-low,and low-high.Among these,high-high and low-low patterns dominate in terms of number of cities.These correlation patterns demonstrate strong temporal stability,with a clear“Matthew effect”.The effect of manufacturing agglomeration on PM_(2.5)levels is significantly negative and helps reduce concentrations regionally,indicating the need to further enhance agglomeration levels regionally.However,it can increase PM_(2.5)levels in neighboring areas due to a siphon effect,and the impact of varies across regions.Compared with levels in 2005-2013,the significance of the relationship between manufacturing agglomeration and PM_(2.5)weakened in the 2013-2019 period.Accordingly,this study proposes countermeasures and policy recommendations aimed at strengthening regional collaborative governance and inspiring differentiated agglomeration strategies to support sustainable economic development in China.
文摘Chitosan(CTS)was grafted onto the surface of amino‑functionalized silver chloride silicon dioxide(AgCl@SiO_(2)‑NH_(2))cores to obtain AgCl@SiO_(2)/CTS hybrid nanoparticles.The as‑obtained AgCl@SiO_(2)/CTS nanoparticles were chlorinated by NaClO solution to get AgCl@SiO_(2)/CTS‑based chloramine nano‑hybrid materials,denoted as AgCl@SiO_(2)/CTS‑Cl.A transmission electron microscope was used to observe the morphology of the as‑prepared samples AgCl@SiO_(2)/CTS and AgCl@SiO_(2)/CTS‑Cl.At the same time,an X‑ray diffractometer and an infrared spectroscope were utilized to characterize their crystal and chemical structures.Besides,ζpotentials were measured to elucidate the surface modification of AgCl nanoparticles by—NH_(2),the antibacterial mechanism of AgCl@SiO_(2)/CTS‑Cl was investigated by scanning electron microscopy,and Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)were used as the to‑be‑tested strains to evaluate the antimicrobial activity of samples AgCl@SiO_(2)/CTS and AgCl@SiO_(2)/CTS‑Cl.Findings demonstrate that sample AgCl@SiO_(2)/CTS exhibits a chain‑like structure ascribed to the interaction between—NH_(2),and each AgCl@SiO_(2)/CTS hybrid nanoparticle contains several AgCl cores.In the meantime,sample AgCl@SiO_(2)/CTS‑Cl exhibits excellent antibacterial activity against E.coli and S.aureus,which is attributed to the synergistic antibacterial effect of Ag^(+)and Cl^(-).Sample AgCl@SiO_(2)/CTS‑Cl with a dosage of 640.00μg·mL^(-1) could completely kill the two kinds of tested bacteria in 12 h of incubation;it retains a high antibacterial efficiency even after 10 cycles of antibacterial tests.
文摘Synchronous reluctance motors(SynRM)are widely employed in industrial applications due to their high robustness,low cost,and absence of permanent magnets.In recent years,significant research efforts have focused on improving the controllability and efficiency of SynRM.Accurate rotor position information is essential for the controller to generate appropriate current and voltage references corresponding to the desired speed and load torque.Shaft-mounted position sensors are generally undesirable because of their high cost,sensitivity to harsh operating conditions,maintenance requirements,and reduced reliability in environments characterized by high vibration.Consequently,sensorless control techniques that estimate rotor position using measured stator currents and voltages have attracted increasing attention.However,magnetic saturation,parameter nonlinearities,and cross-coupling effects significantly degrade position estimation accuracy and may compromise the stability of sensorless SynRM drives.In this paper,a nonlinear SynRM model is developed using finite element analysis(FEA)to accurately capture magnetic saturation and cross-coupling effects,thereby providing a precise representation of the machine’s electromagnetic behavior under varying load and flux conditions.A series of magnetostatic FEA simulations is performed.To reduce computational complexity,only one motor pole is analyzed by applying anti-periodic boundary conditions along the domain sides and enforcing a zero magnetic vector potential on the external stator boundary.Nonlinear iron material properties are modeled using the appropriate B-H curve.The simulations are carried out by imposing d-and q-axis current components and computing the corresponding flux linkages and electromagnetic torque.Based on these results,both apparent and incremental inductances are extracted and incorporated into the control algorithm.An advanced fictitious flux linkage method combined with a phase-locked loop(PLL)is employed for accurate rotor position estimation.Simulation results confirm that the proposed sensorless control strategy ensures stable operation and high position estimation accuracy over the entire speed range.
基金supported by the National Natural Science Foundation of China(No.62464010)Spring City Plan-Special Program for Young Talents(K202005007)+2 种基金Yunnan Talents Support Plan for Young Talents(XDYC-QNRC-2022-0482)Yunnan Local Colleges Applied Basic Research Projects(202101BA070001-138)Frontier Research Team of Kunming University 2023.
文摘Rechargeable Zn/Sn-air batteries have received considerable attention as promising energy storage devices.However,the electrochemical performance of these batteries is significantly constrained by the sluggish electrocatalytic reaction kinetics at the cathode.The integration of light energy into Zn/Sn-air batteries is a promising strategy for enhancing their performance.However,the photothermal and photoelectric effects generate heat in the battery under prolonged solar irradiation,leading to air cathode instability.This paper presents the first design and synthesis of Ni_(2)-1,5-diamino-4,8-dihydroxyanthraquinone(Ni_(2)DDA),an electronically conductiveπ-d conjugated metal-organic framework(MOF).Ni_(2)DDA exhibits both photoelectric and photothermal effects,with an optical band gap of~1.14 eV.Under illumination,Ni_(2)DDA achieves excellent oxygen evolution reaction performance(with an overpotential of 245 mV vs.reversible hydrogen electrode at 10 mA cm^(−2))and photothermal stability.These properties result from the synergy between the photoelectric and photothermal effects of Ni_(2)DDA.Upon integration into Zn/Sn-air batteries,Ni_(2)DDA ensures excellent cycling stability under light and exhibits remarkable performance in high-temperature environments up to 80℃.This study experimentally confirms the stable operation of photo-assisted Zn/Sn-air batteries under high-temperature conditions for the first time and provides novel insights into the application of electronically conductive MOFs in photoelectrocatalysis and photothermal catalysis.
基金support from the Jiangsu Natural Science Foundation of China(BK20230329)the National Natural Science Foundation of China(22401147,22361132540,and 22178161)the Russian Science Foundation(23-73-30007).
文摘The efficient electrocatalytic oxidation of glycerol(GLY)is one of the most promising routes for the valorization of GLY.Doping has emerged as a powerful strategy to tailor the electrocatalytic performance of silver nanoclusters(Ag NCs),yet the effects of doping mode(surface vs.core)and the interface environment(e.g.,electrolyte concentration)on the electrocatalytic performance for Ag NCs toward GLY oxidation remain understood.In this work,surface-doped Ag_(4)M_(2)(SR)_(8) and core-doped Ag_(24)M(SR)_(18)(M=Ni,Pd,Pt;SR=SPhMe_(2))NCs were synthesized for electrocatalytic GLY oxidation.The results revealed a strong dependence of selectivity on doping mode and electrolyte concentration:under low KOH concentration,Pd-and Pt-doped Ag_(4)M_(2) NCs exhibited 100%selectivity toward oxalic acid(OA),whereas Pd-and Pt-doped Ag_(24)M NCs delivered>95%selectivity for formic acid(FA).In contrast,under high KOH concentration,Pd-and Pt-doped Ag_(4)M_(2) NCs gave rise to>80%FA,while Pd-and Pt-doped Ag_(24)M NCs produced>45%FA.Mechanism studies indicated that Ni doping predominantly enhanced catalytic activity via lowering the activation barrier of the initial reaction step(GLY→glyceraldehyde),whereas Pd and Pt doping modulated selectivity through reducing the energy barrier of the selective branch step(glyceric acid→OA,OA→FA).High KOH concentration promoted the oxidation by increasing the electrochemical active surface area and facilitating electron transfer of Ag NCs.This study provides clear guidance for designing high-performance Ag-based electrocatalysts for biomass valorization.
文摘The UV-2600 ultraviolet(UV)spectrophotometer and the UV sunscreen index analyzer SolarLight Model 601 were used to test the UV absorption capacity and the UV damage alleviating effect of commonly used raw materials,and the Hen’s Egg Test-Chorioallantoic Membrane were also processed to assess the mildness.As a result,bisabolol,pongamia pinnata seed extract,pterocarpus marsupium bark extract and other materials were screened as the effective and gentle sunscreen synergistic ingredients.
文摘The dried fruit of Forsythia suspensa(Oleaceae),also known as Forsythia,is a traditional Chinese medicinal herb known for its heat-clearing and detoxifying properties.It is used to disperse nodules,reduce swelling,remove toxins,clear heat,and alleviate wind-heat syndromes.It also has hepatoprotective,anti-inflammatory,antiviral,antibacterial,anticancer,antioxidant,antiaging,and anti-obesity effects,as well as potential therapeutic effects on Alzheimer’s disease and diabetic nephropathy.It is used to treat scrofula,mastitis,wind-heat common cold,and other ailments.The review summarizes the chemical constituents and pharmacological effects of F.suspensa,aiming to provide a scientific foundation for its future development,research,and clinical utilization.
