The analysis method of the triple test cross design has been discussed carefully from the two factor experiment design and the genetic models of additive dominant effect and of epistasis effect.Two points different f...The analysis method of the triple test cross design has been discussed carefully from the two factor experiment design and the genetic models of additive dominant effect and of epistasis effect.Two points different from the previous reports have been concluded: (1)both the degrees of freedom of the orthogonal terms C2 and C3 are m, (2)the denominator in the F test to C2 and C3 is the error mean of square between plots.展开更多
Experimental data analysis and simulation calculations were performed in order to evaluate the cross-talk rejection performance of a typical neutron detection array. For very closely packed scintillation bars, the CT ...Experimental data analysis and simulation calculations were performed in order to evaluate the cross-talk rejection performance of a typical neutron detection array. For very closely packed scintillation bars, the CT rejection may rely on the position relation between the two signals. The criteria ｜△x｜≤ 15 cm and ｜△y｜≤12 cm are currently proposed for a rejection rate higher than 90%. For signals coming from distanced bars, the energy conservation relationship can be applied to reject the CT events with a similar performance. In both cases the results of simulation agree very well with the experimental data, assuring their applicability to other detection systems and physics problems.展开更多
We apply the Colour Family Drawing Test, as a development of the traditional black and white test, for cross-cultural comparison. The participants, aged 7 - 10 years, both genders, were examined individually. Each sub...We apply the Colour Family Drawing Test, as a development of the traditional black and white test, for cross-cultural comparison. The participants, aged 7 - 10 years, both genders, were examined individually. Each subject sat at a single table with a white rectangular card of standard size, 24 well-sharpened colour pencils, a black pencil, an eraser and other appropriate tools. S/he received this verbal instruction: “Draw your family”. The procedure was firstly applied to 120 participants attending primary schools of Rome (Biasi, Bonaiuto and Levin, 2014). The families were evaluated through a semi-structural interview conducted with the children’s teachers and divided into: Harmonious versus Very Conflictual Families. The drawings made by children of Harmonious Families consistently used “Reassuring and Playful Colours” (Pink, Orange, Sky Blue, Light Green, Light Yellow, other pastel colours);and were larger, tidier and more proportioned to respect the opposite group. Children belonging to Conflictual Families used mostly “Alarming and Serious Colours” (Grey, Black, Dark Bleu, Violet, Olive Green) and their drawings were less extended, more often disordered and had typical deformations such as figures too thin. A second investigation examined 120 participants belonging to Asian immigrant families residing in Italy. A third investigation examined 120 participants belonging to Russian families of Moscow. Both last two investigations obtained very similar results on the use of colours, and gave a confirmation of the relevance of the Colour Family Drawing Test.展开更多
This paper extends and generalizes the works of [1,2] to allow for cross-sectional dependence in the context of a two-way error components model and consequently develops LM test. The cross-sectional dependence follow...This paper extends and generalizes the works of [1,2] to allow for cross-sectional dependence in the context of a two-way error components model and consequently develops LM test. The cross-sectional dependence follows the first order spatial autoregressive error (SAE) process and is imposed on the remainder disturbances. It is important to note that this paper does not consider alternative forms of spatial lag dependence other than SAE. It also does not allow for endogeneity of the regressors and requires the normality assumption to derive the LM test.展开更多
Results of analysis of variation of cross fault short-baseline and short-range leveling in Western Yunnan Earthquake Test Site (WYETS), results show that among five observation stations of cross fault short-baseline a...Results of analysis of variation of cross fault short-baseline and short-range leveling in Western Yunnan Earthquake Test Site (WYETS), results show that among five observation stations of cross fault short-baseline and short-range leveling in WYETS before the Lijiang MS7.0 Earthquake occurred in February 1996 only Yongsheng observation station (epicentral distance 82 km) located at Chenghai fault shows great variation about one year before the earthquake. And the nearest observation station, Lijiang (epicentral distance 42 km); presents great coseismic variation, but does not show obvious anomalous variation before the earthquake. There are no significant variations related to the earthquake at the other three observation stations. Two methods are used in analysis of the observed data and some valuable results have been obtained.展开更多
Conventional modal parameter identifications are usually based on frequencyresponse functions, which require measurements of both the input force and the resulting response.However, in many cases, only response data a...Conventional modal parameter identifications are usually based on frequencyresponse functions, which require measurements of both the input force and the resulting response.However, in many cases, only response data are available while the actual excitations (such aswind/wave load) are not measurable. Modal parameters estimation must base itself on response-onlydata. Over the past years, many time-domain modal parameter identification techniques fromoutput-only are proposed. A poly-reference frequency-domain modal identification scheme onresponse-only is presented. It is based on coupling the cross-correlation theory with conventionalfrequency-domain modal parameter extraction. An experiment using an airplane model is performed toverify the proposed method.展开更多
The aim of this study is to analyze the various compositions of polyvinyl alcohol (PVA) and starch blends. The blends have been cross-linked with glyoxal to enhance its properties. The hydroxyl groups of PVA and starc...The aim of this study is to analyze the various compositions of polyvinyl alcohol (PVA) and starch blends. The blends have been cross-linked with glyoxal to enhance its properties. The hydroxyl groups of PVA and starch react with glyoxal via formation of acetal bonds;hence crosslinking could take place. The cross-linking of glyoxal is observed in various analytical methods such as DSC and FTIR. The cross-linked blends showed better thermal and mechanical properties. Viscosity, tensile shear strength, pencil hardness and ultimate stress were evaluated to estimate the changes due to cross-linking. It was observed that the cross-linking is directly proportional to starch, since the starch hydroxyl groups are easily accessible for reacting. The cross-linked blend showed better cohesion between its chains, thereby increasing glass transition temperature. It was reflected in the subsequent increase in tensile strength properties.展开更多
Aminated tannins were prepared by reacting mimosa condensed tannin extract with ammonia yielding the substitution of many,if not all of the tannin hydroxyl groups with–NH_(2)groups.A tannin-aminated tannin(ATT)partic...Aminated tannins were prepared by reacting mimosa condensed tannin extract with ammonia yielding the substitution of many,if not all of the tannin hydroxyl groups with–NH_(2)groups.A tannin-aminated tannin(ATT)particleboard coating was then prepared by reacting raw tannin extract with aminated tannin extract and thus cross-linking the two by substituting tannin’s hydroxyl groups with the–NH_(2)groups on the aminated tannin to form–NH-bridges between the two.The resulting particleboard coating gave encouraging results when pressed at 180℃for 3 min.Conversely,the system in which tannin was reacted/cross-liked with urea(ATU)by a similar amination reaction did not perform as well as the ATT system,and this even when a higher curing temperature and longer hot press time were used.In particular its water repellence was worse probably due to the presence of urea and such a system with lower reactivity.Nonetheless,substituting the tannin–OHs with the urea–NH_(2)groups appeared to also take place.ATT gave better results than ATU as regards water repellence and mechanical resistance as shown by the cross cut test.The ATT system was shown to be between 95%and 98%biosourced.The difference appeared to be due,by TMA analysis,to the much faster formation of the ATT hardened network leading to a better cross-linked polymer coating.The chemical species formed for both the ATT and ATU system were studied by MALDI ToF and CP MAS^(13)C NMR.展开更多
The purpose of this study is to design a Moroccan Trail Making Test B;explore the effects of age, education and gender on the performance of the Trail Making Test (TMT);and provide normative information in Moroccan su...The purpose of this study is to design a Moroccan Trail Making Test B;explore the effects of age, education and gender on the performance of the Trail Making Test (TMT);and provide normative information in Moroccan subjects. Our normalization study was conducted on 348 subjects (156 female and 192 male). The subjects were classified into four groups based on age (18 - 39 years, 40 - 59 years, 60 - 69 years and ≥70 years), and three groups based on educational level (3 - 6 years, 7 - 10 years and ≥11 years). The data were analyzed using descriptive statistics through SPSS. The results displayed that increasing age and decreasing levels of education significantly result in a decreased performance on the Trail A, Moroccan Trail B and English Trail B. Only 229 bilingual subjects among the 348 initial subjects completed both versions of Trail B. There was no significant difference on performance between Moroccan Trail B and English Trail B for these subjects.展开更多
In this paper, the new organization for unit testing embedding pair-wise mode is proposed with the core thought focused on the cooperation of programmer and tester by “cross-testing”. The typical content of unit tes...In this paper, the new organization for unit testing embedding pair-wise mode is proposed with the core thought focused on the cooperation of programmer and tester by “cross-testing”. The typical content of unit testing for the new organizing mode should have three aspects, including self-checking, cross-testing and independent-testing. For cross-testing, executing “pair-wise” mode, mainly tackles data testing, function testing and state testing, which function testing must be done by details and state testing must be considered for completeness. With the specializing of independent-testing, it should be taken as more rigid testing without arbitrariness. Consequently, strategy and measure are addressed for data testing focusing on boundary testing and function/state testing. And organizing method of procedure and key points of tackling unit testing are investigated for the new organizing mode. In order to assess the validity of our study and approach, a series of actual examples are demonstrated for GUI software. The result indicates that the execution of unit testing for the new organizing mode is effective and applicable.展开更多
On the basis of the canard configuration a contour stealth design including chiefly the wing, the fuselage and their connection type is projected. The prime project of a blended wing body vehicle with canard is provid...On the basis of the canard configuration a contour stealth design including chiefly the wing, the fuselage and their connection type is projected. The prime project of a blended wing body vehicle with canard is provided and through the change of the fuselage head form and the different fin disposals, the radar cross section (RCS) is optimized. The average value of RCS and the value of RCS in the ± 45 ° front sector for different designs are illustrated. The model measurement proves that the project having a sharp head fuselage and 30 ° angle double fin has the minimum value of RCS. The wind tunnel test to the model with RCS optimized proved that the vehicle project has excellent aerodynamic characteristics such as high lift curve slope, up to 26° stalling angle, high lift / drag ratio equal to 8, and also has low RCS value in the front sector and in the lateral sector.展开更多
AIM: To reveal angiographic findings to predict the re-sult of balloon test occlusion(BTO).METHODS: The cerebral angiograms of 42 consecu-tive patients who underwent cerebral angiography in-cluding both the Matas and ...AIM: To reveal angiographic findings to predict the re-sult of balloon test occlusion(BTO).METHODS: The cerebral angiograms of 42 consecu-tive patients who underwent cerebral angiography in-cluding both the Matas and Allcock maneuvers and BTO were retrospectively analyzed. Visualization of the an-terior cerebral artery(ACA) and the middle cerebral ar-tery(MCA) by the cross flow on the tested side during the Matas or Allcock maneuver was graded on a 5-point scale. Circle of Willis(COW) anatomy with respect to the presence/absence of a collateral path to reach the tested internal carotid artery(ICA) was classified intofour categories. A univariate logistic analysis was used to analyze the associations between each angiographic finding and the BTO result. Sensitivity, specificity, accu-racy, positive predictive value, and negative predictive value for each finding were calculated. RESULTS: Five patients(12%) were BTO-positive and the remaining 37 patients(88%) were BTO-negative. Visualizations of the ACA and MCA as well as the COW anatomy were significantly associated with the BTO re-sult(P = 0.0051 for ACA, P = 0.0002 for MCA, and P < 0.0001 for COW anatomy). In particular, good MCA vi-sualization and the presence of an anterior connection(collateral path to the tested ICA from the contralateral ICA via the anterior communicating artery) in the COW were highly predictive for negative BTO(negative pre-dictive value = 100% for both).展开更多
t According to a general representation of physical scale factor of RCS for variance in the size of simply shaped scatterers, a novel RCS model-testing method is described. The computed results of the prototype scatte...t According to a general representation of physical scale factor of RCS for variance in the size of simply shaped scatterers, a novel RCS model-testing method is described. The computed results of the prototype scatterers by this method from the model-testing agree well with their measured values both for two kinds of simply shaped scatterers, cylinders and ladder-shaped plates.展开更多
The multi-wedge cross rolling process of forming balls is described. The process tool for rolling 8 balls with a diameter of 35 mm is presented. The course of the rolling process, distributions of forming forces as we...The multi-wedge cross rolling process of forming balls is described. The process tool for rolling 8 balls with a diameter of 35 mm is presented. The course of the rolling process, distributions of forming forces as well as maps of effective strain and temperature in the obtained balls are presented by finite element modeling （FEM）. Ex- perimental tests of simultaneous forming of 4 balls with a diameter of 22 mm conducted in laboratory conditions at Lublin University of Technology have proved that the balls obtained in multi-wedge cross rolling are of good quality and can therefore be used in both ball mills and rolling bearings.展开更多
目的探讨维持性血液透析(maintenance hemodialysis,MHD)患者计时站立行走测试(time up and go test,TUG)时间延长的影响因素。方法采用横断面调查法,选取2023年6月1日至2024年1月31日于首都医科大学附属北京潞河医院规律血液透析、数...目的探讨维持性血液透析(maintenance hemodialysis,MHD)患者计时站立行走测试(time up and go test,TUG)时间延长的影响因素。方法采用横断面调查法,选取2023年6月1日至2024年1月31日于首都医科大学附属北京潞河医院规律血液透析、数据完整且可配合的患者,分别采用简易精神状态检查表(Minimum Mental State Examination,MMSE)、5次起坐试验(5 times sit to stand,STS-5)、TUG量表评估患者认知功能、下肢肌肉力量、平衡及步态功能;根据TUG结果进行分组,即TUG≤12 s,判定为TUG正常组;TUG>12 s判定为TUG延长组,采用多因素Logistic回归法分析患者TUG延长组的影响因素,以受试者工作特征(receiver operating characteristic,ROC)曲线分析影响因素对TUG延长患者的预测价值。结果本研究共纳入146例MHD患者,TUG延长组86例,TUG正常组60例,两组的性别、年龄、合并高血压、合并糖尿病、血糖、教育水平、MMSE评分、C反应蛋白、血白蛋白、血肌酐、血钠、全段甲状旁腺素、低密度脂蛋白胆固醇、血尿酸、STS-5、单次尿素氮清除指数(urea clearance index,Kt/V)差异具有统计学意义(P<0.05);进一步行多因素Logistic回归分析显示,高龄、女性、低MMSE评分、低Kt/V以及STS-5时间延长是发生TUG延长的独立危险因素(P<0.05);ROC曲线显示,年龄、性别、MMSE总分、STS-5时间预测MHD患者发生TUG延长的曲线下面积(area under the curve,AUC)分别为0.825、0.678、0.777、0.836(P<0.01),具有较高的预测价值,Kt/V预测患者发生TUG延长的AUC为0.602(P=0.037),有一定的预测价值;以上5项指标作为整体模型预测MHD患者发生TUG延长的AUC为0.923(P<0.01)结论MHD患者的年龄、性别、MMSE评分、STS-5时间延长、Kt/V的水平与合并TUG延长相关,是发生TUG延长的独立危险因素,可能成为预测TUG延长的生物学指标。展开更多
文摘The analysis method of the triple test cross design has been discussed carefully from the two factor experiment design and the genetic models of additive dominant effect and of epistasis effect.Two points different from the previous reports have been concluded: (1)both the degrees of freedom of the orthogonal terms C2 and C3 are m, (2)the denominator in the F test to C2 and C3 is the error mean of square between plots.
基金supported by the National Basic Research Program of China (No. 2007CB815002)the Fundamental Research Funds for the Central Universities of China (HEUCF101501)Harbin Engineering University of China (002150260713)
文摘Experimental data analysis and simulation calculations were performed in order to evaluate the cross-talk rejection performance of a typical neutron detection array. For very closely packed scintillation bars, the CT rejection may rely on the position relation between the two signals. The criteria ｜△x｜≤ 15 cm and ｜△y｜≤12 cm are currently proposed for a rejection rate higher than 90%. For signals coming from distanced bars, the energy conservation relationship can be applied to reject the CT events with a similar performance. In both cases the results of simulation agree very well with the experimental data, assuring their applicability to other detection systems and physics problems.
文摘We apply the Colour Family Drawing Test, as a development of the traditional black and white test, for cross-cultural comparison. The participants, aged 7 - 10 years, both genders, were examined individually. Each subject sat at a single table with a white rectangular card of standard size, 24 well-sharpened colour pencils, a black pencil, an eraser and other appropriate tools. S/he received this verbal instruction: “Draw your family”. The procedure was firstly applied to 120 participants attending primary schools of Rome (Biasi, Bonaiuto and Levin, 2014). The families were evaluated through a semi-structural interview conducted with the children’s teachers and divided into: Harmonious versus Very Conflictual Families. The drawings made by children of Harmonious Families consistently used “Reassuring and Playful Colours” (Pink, Orange, Sky Blue, Light Green, Light Yellow, other pastel colours);and were larger, tidier and more proportioned to respect the opposite group. Children belonging to Conflictual Families used mostly “Alarming and Serious Colours” (Grey, Black, Dark Bleu, Violet, Olive Green) and their drawings were less extended, more often disordered and had typical deformations such as figures too thin. A second investigation examined 120 participants belonging to Asian immigrant families residing in Italy. A third investigation examined 120 participants belonging to Russian families of Moscow. Both last two investigations obtained very similar results on the use of colours, and gave a confirmation of the relevance of the Colour Family Drawing Test.
文摘This paper extends and generalizes the works of [1,2] to allow for cross-sectional dependence in the context of a two-way error components model and consequently develops LM test. The cross-sectional dependence follows the first order spatial autoregressive error (SAE) process and is imposed on the remainder disturbances. It is important to note that this paper does not consider alternative forms of spatial lag dependence other than SAE. It also does not allow for endogeneity of the regressors and requires the normality assumption to derive the LM test.
基金This project was sponsored by the Application Basis Research Foundation of Yunnan Province (97D06), China.
文摘Results of analysis of variation of cross fault short-baseline and short-range leveling in Western Yunnan Earthquake Test Site (WYETS), results show that among five observation stations of cross fault short-baseline and short-range leveling in WYETS before the Lijiang MS7.0 Earthquake occurred in February 1996 only Yongsheng observation station (epicentral distance 82 km) located at Chenghai fault shows great variation about one year before the earthquake. And the nearest observation station, Lijiang (epicentral distance 42 km); presents great coseismic variation, but does not show obvious anomalous variation before the earthquake. There are no significant variations related to the earthquake at the other three observation stations. Two methods are used in analysis of the observed data and some valuable results have been obtained.
基金This project is supported by Aeronautics Foundation (No. 1152059), Civil Aviation Foundation (No.1007-272) the 9-th Five Plan of the Aeronautical Industrial Corporation (No.62.2.2.1), China.
文摘Conventional modal parameter identifications are usually based on frequencyresponse functions, which require measurements of both the input force and the resulting response.However, in many cases, only response data are available while the actual excitations (such aswind/wave load) are not measurable. Modal parameters estimation must base itself on response-onlydata. Over the past years, many time-domain modal parameter identification techniques fromoutput-only are proposed. A poly-reference frequency-domain modal identification scheme onresponse-only is presented. It is based on coupling the cross-correlation theory with conventionalfrequency-domain modal parameter extraction. An experiment using an airplane model is performed toverify the proposed method.
文摘The aim of this study is to analyze the various compositions of polyvinyl alcohol (PVA) and starch blends. The blends have been cross-linked with glyoxal to enhance its properties. The hydroxyl groups of PVA and starch react with glyoxal via formation of acetal bonds;hence crosslinking could take place. The cross-linking of glyoxal is observed in various analytical methods such as DSC and FTIR. The cross-linked blends showed better thermal and mechanical properties. Viscosity, tensile shear strength, pencil hardness and ultimate stress were evaluated to estimate the changes due to cross-linking. It was observed that the cross-linking is directly proportional to starch, since the starch hydroxyl groups are easily accessible for reacting. The cross-linked blend showed better cohesion between its chains, thereby increasing glass transition temperature. It was reflected in the subsequent increase in tensile strength properties.
基金supported by a grant of the French Agence Nationale de la Recherche(ANR)in the Ambit of the Laboratory of Excellence(Labex)ARBRE.This work was also supported by“The 111 Project(D21027)”.
文摘Aminated tannins were prepared by reacting mimosa condensed tannin extract with ammonia yielding the substitution of many,if not all of the tannin hydroxyl groups with–NH_(2)groups.A tannin-aminated tannin(ATT)particleboard coating was then prepared by reacting raw tannin extract with aminated tannin extract and thus cross-linking the two by substituting tannin’s hydroxyl groups with the–NH_(2)groups on the aminated tannin to form–NH-bridges between the two.The resulting particleboard coating gave encouraging results when pressed at 180℃for 3 min.Conversely,the system in which tannin was reacted/cross-liked with urea(ATU)by a similar amination reaction did not perform as well as the ATT system,and this even when a higher curing temperature and longer hot press time were used.In particular its water repellence was worse probably due to the presence of urea and such a system with lower reactivity.Nonetheless,substituting the tannin–OHs with the urea–NH_(2)groups appeared to also take place.ATT gave better results than ATU as regards water repellence and mechanical resistance as shown by the cross cut test.The ATT system was shown to be between 95%and 98%biosourced.The difference appeared to be due,by TMA analysis,to the much faster formation of the ATT hardened network leading to a better cross-linked polymer coating.The chemical species formed for both the ATT and ATU system were studied by MALDI ToF and CP MAS^(13)C NMR.
文摘The purpose of this study is to design a Moroccan Trail Making Test B;explore the effects of age, education and gender on the performance of the Trail Making Test (TMT);and provide normative information in Moroccan subjects. Our normalization study was conducted on 348 subjects (156 female and 192 male). The subjects were classified into four groups based on age (18 - 39 years, 40 - 59 years, 60 - 69 years and ≥70 years), and three groups based on educational level (3 - 6 years, 7 - 10 years and ≥11 years). The data were analyzed using descriptive statistics through SPSS. The results displayed that increasing age and decreasing levels of education significantly result in a decreased performance on the Trail A, Moroccan Trail B and English Trail B. Only 229 bilingual subjects among the 348 initial subjects completed both versions of Trail B. There was no significant difference on performance between Moroccan Trail B and English Trail B for these subjects.
文摘In this paper, the new organization for unit testing embedding pair-wise mode is proposed with the core thought focused on the cooperation of programmer and tester by “cross-testing”. The typical content of unit testing for the new organizing mode should have three aspects, including self-checking, cross-testing and independent-testing. For cross-testing, executing “pair-wise” mode, mainly tackles data testing, function testing and state testing, which function testing must be done by details and state testing must be considered for completeness. With the specializing of independent-testing, it should be taken as more rigid testing without arbitrariness. Consequently, strategy and measure are addressed for data testing focusing on boundary testing and function/state testing. And organizing method of procedure and key points of tackling unit testing are investigated for the new organizing mode. In order to assess the validity of our study and approach, a series of actual examples are demonstrated for GUI software. The result indicates that the execution of unit testing for the new organizing mode is effective and applicable.
文摘On the basis of the canard configuration a contour stealth design including chiefly the wing, the fuselage and their connection type is projected. The prime project of a blended wing body vehicle with canard is provided and through the change of the fuselage head form and the different fin disposals, the radar cross section (RCS) is optimized. The average value of RCS and the value of RCS in the ± 45 ° front sector for different designs are illustrated. The model measurement proves that the project having a sharp head fuselage and 30 ° angle double fin has the minimum value of RCS. The wind tunnel test to the model with RCS optimized proved that the vehicle project has excellent aerodynamic characteristics such as high lift curve slope, up to 26° stalling angle, high lift / drag ratio equal to 8, and also has low RCS value in the front sector and in the lateral sector.
文摘AIM: To reveal angiographic findings to predict the re-sult of balloon test occlusion(BTO).METHODS: The cerebral angiograms of 42 consecu-tive patients who underwent cerebral angiography in-cluding both the Matas and Allcock maneuvers and BTO were retrospectively analyzed. Visualization of the an-terior cerebral artery(ACA) and the middle cerebral ar-tery(MCA) by the cross flow on the tested side during the Matas or Allcock maneuver was graded on a 5-point scale. Circle of Willis(COW) anatomy with respect to the presence/absence of a collateral path to reach the tested internal carotid artery(ICA) was classified intofour categories. A univariate logistic analysis was used to analyze the associations between each angiographic finding and the BTO result. Sensitivity, specificity, accu-racy, positive predictive value, and negative predictive value for each finding were calculated. RESULTS: Five patients(12%) were BTO-positive and the remaining 37 patients(88%) were BTO-negative. Visualizations of the ACA and MCA as well as the COW anatomy were significantly associated with the BTO re-sult(P = 0.0051 for ACA, P = 0.0002 for MCA, and P < 0.0001 for COW anatomy). In particular, good MCA vi-sualization and the presence of an anterior connection(collateral path to the tested ICA from the contralateral ICA via the anterior communicating artery) in the COW were highly predictive for negative BTO(negative pre-dictive value = 100% for both).
文摘t According to a general representation of physical scale factor of RCS for variance in the size of simply shaped scatterers, a novel RCS model-testing method is described. The computed results of the prototype scatterers by this method from the model-testing agree well with their measured values both for two kinds of simply shaped scatterers, cylinders and ladder-shaped plates.
基金Item Sponsored by Ministry of Science and Higher Education of Poland Over Years 2009-2012as a Project for Development(0457/R/T02/2009/06)
文摘The multi-wedge cross rolling process of forming balls is described. The process tool for rolling 8 balls with a diameter of 35 mm is presented. The course of the rolling process, distributions of forming forces as well as maps of effective strain and temperature in the obtained balls are presented by finite element modeling （FEM）. Ex- perimental tests of simultaneous forming of 4 balls with a diameter of 22 mm conducted in laboratory conditions at Lublin University of Technology have proved that the balls obtained in multi-wedge cross rolling are of good quality and can therefore be used in both ball mills and rolling bearings.
文摘目的探讨维持性血液透析(maintenance hemodialysis,MHD)患者计时站立行走测试(time up and go test,TUG)时间延长的影响因素。方法采用横断面调查法,选取2023年6月1日至2024年1月31日于首都医科大学附属北京潞河医院规律血液透析、数据完整且可配合的患者,分别采用简易精神状态检查表(Minimum Mental State Examination,MMSE)、5次起坐试验(5 times sit to stand,STS-5)、TUG量表评估患者认知功能、下肢肌肉力量、平衡及步态功能;根据TUG结果进行分组,即TUG≤12 s,判定为TUG正常组;TUG>12 s判定为TUG延长组,采用多因素Logistic回归法分析患者TUG延长组的影响因素,以受试者工作特征(receiver operating characteristic,ROC)曲线分析影响因素对TUG延长患者的预测价值。结果本研究共纳入146例MHD患者,TUG延长组86例,TUG正常组60例,两组的性别、年龄、合并高血压、合并糖尿病、血糖、教育水平、MMSE评分、C反应蛋白、血白蛋白、血肌酐、血钠、全段甲状旁腺素、低密度脂蛋白胆固醇、血尿酸、STS-5、单次尿素氮清除指数(urea clearance index,Kt/V)差异具有统计学意义(P<0.05);进一步行多因素Logistic回归分析显示,高龄、女性、低MMSE评分、低Kt/V以及STS-5时间延长是发生TUG延长的独立危险因素(P<0.05);ROC曲线显示,年龄、性别、MMSE总分、STS-5时间预测MHD患者发生TUG延长的曲线下面积(area under the curve,AUC)分别为0.825、0.678、0.777、0.836(P<0.01),具有较高的预测价值,Kt/V预测患者发生TUG延长的AUC为0.602(P=0.037),有一定的预测价值;以上5项指标作为整体模型预测MHD患者发生TUG延长的AUC为0.923(P<0.01)结论MHD患者的年龄、性别、MMSE评分、STS-5时间延长、Kt/V的水平与合并TUG延长相关,是发生TUG延长的独立危险因素,可能成为预测TUG延长的生物学指标。
