Ferroelectric film materials have attracted significant interest due to their potential for harvesting various forms ofclean energy from natural environmental sources.However,the photoelectric performance of these mat...Ferroelectric film materials have attracted significant interest due to their potential for harvesting various forms ofclean energy from natural environmental sources.However,the photoelectric performance of these materials isfrequently constrained by heat generation during light absorption,resulting in significant thermal losses.Most offerroelectric films produce photocurrent and thermocurrent with opposite polarity,thus weakening the coupledphoto-thermoelectric output of the devices.Here we report on a LaNiO_(3)/BiMn_(2)O_(5)(BMO)/ITO ferroelectric film toproduce photocurrent and thermocurrent with the same polarity.The polarity of the photocurrent generated bythe BMO film is shown to be determined solely by the direction of spontaneous polarization,overcoming thedetrimental effect of Schottky barrier for energy harvesting in device.We propose a new strategy to enhance thecoupling factor,thereby offering valuable new insights for optimizing the utilization of ferroelectric materials inboth light and heat energy applications.展开更多
Developing microwave electric field sensing based on Rydberg atoms has received significant attention due to its unique advantages. However, achieving effective coupling between Rydberg atoms and the microwave electri...Developing microwave electric field sensing based on Rydberg atoms has received significant attention due to its unique advantages. However, achieving effective coupling between Rydberg atoms and the microwave electric field in the sensing process is a challenging problem that greatly impacts the sensitivity. To address this, we propose using a microwave resonant cavity to enhance the effective coupling between the Rydberg atoms and the microwave electric field. In our experiment, Rydberg atoms are prepared via a three-photon excitation scheme, and the electric fields are measured without and with a microwave cavity in which the vapor cell is placed inside, respectively. As a result, we achieved an 18 dB enhancement of power sensitivity by adding the cavity,which is an effective enhancement in electric field pulse signal detection. This experimental testing provides a promising direction for enhancing the sensitivity of Rydberg atomic electric field sensors and paves the way for their application in precision electric field measurements.展开更多
Cavity optomechanics is applied to study the coupling behavior of interacting molecules in surface plasmon systems driven by two-color laser beams. Different from the traditional force–distance measurement, due to a ...Cavity optomechanics is applied to study the coupling behavior of interacting molecules in surface plasmon systems driven by two-color laser beams. Different from the traditional force–distance measurement, due to a resonant frequency shift or a peak splitting on the probe spectrum, we have proposed a convenient method to measure the van der Waals force strength and interaction energy via nonlinear spectroscopy. The minimum force value can reach approximately 10^(-15) N, which is 3 to 4 orders of magnitude smaller than the widely applied atomic force microscope(AFM). It is also shown that two adjacent molecules with similar chemical structures and nearly equal vibrational frequencies can be easily distinguished by the splitting of the transparency peak. Based on this coupled optomechanical system, we also conceptually design a tunable optical switch by van der Waals interaction. Our results will provide new approaches for understanding the complex and dynamic interactions inmolecule–plasmon systems.展开更多
Electrochemical CO_(2) reduction driven by renewable electricity is one of the promising strategies to store sus-tainable energy as fuels.However,the selectivity of value-added multi-carbon products remains poor for f...Electrochemical CO_(2) reduction driven by renewable electricity is one of the promising strategies to store sus-tainable energy as fuels.However,the selectivity of value-added multi-carbon products remains poor for further application of this process.Here,we regulate CO adsorption by forming a Nafion layer on the copper(Cu)electrode that is repulsive to OH^(-),contributing to enhanced selectivity of CO_(2) reduction to C_(2) products with the suppression of C 1 products.The operando Raman spectroscopy indicates that the local OH^(-)would adsorb on part of active sites and decrease the adsorption of CO.Therefore,the electrode with repulsive to OH^(-)can adjust the concentration of OH^(-),leading to the increased adsorption of CO and enhanced C–C coupling.This work shows that electrode design could be an effective strategy for improving the selectivity of CO_(2) reduction to multi-carbon products.展开更多
Laser annealing of silicon dioxide （SiO2） film formed by inductively coupled plasma enhanced chemical vapor deposition （ICPECVD）is studied for the fabrication of low loss silicon based waveguide. The influence of ...Laser annealing of silicon dioxide （SiO2） film formed by inductively coupled plasma enhanced chemical vapor deposition （ICPECVD）is studied for the fabrication of low loss silicon based waveguide. The influence of laser annealing on ICPECVD-deposited SiO2 film is investigated. The surface roughness, refractive index, and etch rate of annealed samples are compared with those of SiO2 film obtained by thermal oxidation. It is demonstrated that the performance of ICPECVD-deposited SiO2 film can be significantly improved by laser annealing. Al2O3/SIO2 waveguide has been fabricated on silicon substrate with the SiO2 lower cladding formed by ICPECVD and laser annealing process, and its propagation loss is found to be comparable with that of the waveguide with thermally oxidized lower cladding.展开更多
基金supported by the National Natural Science Foundation of China(grant no.52072041)the Beijing Natural Science Foundation(grant no.JQ21007).
文摘Ferroelectric film materials have attracted significant interest due to their potential for harvesting various forms ofclean energy from natural environmental sources.However,the photoelectric performance of these materials isfrequently constrained by heat generation during light absorption,resulting in significant thermal losses.Most offerroelectric films produce photocurrent and thermocurrent with opposite polarity,thus weakening the coupledphoto-thermoelectric output of the devices.Here we report on a LaNiO_(3)/BiMn_(2)O_(5)(BMO)/ITO ferroelectric film toproduce photocurrent and thermocurrent with the same polarity.The polarity of the photocurrent generated bythe BMO film is shown to be determined solely by the direction of spontaneous polarization,overcoming thedetrimental effect of Schottky barrier for energy harvesting in device.We propose a new strategy to enhance thecoupling factor,thereby offering valuable new insights for optimizing the utilization of ferroelectric materials inboth light and heat energy applications.
基金the fundings from National Key R&D Program of China (Grant No. 2022YFA1404002)National Natural Science Foundation of China (Grant Nos. T2495253, U20A20218, 61525504, and 61435011)+4 种基金Anhui Initiative in Quantum Information Technologies (Grant No. AHY020200)Major Science and Technology Projects in Anhui Province (Grant No. 202203a13010001)Youth Innovation Promotion Association of the Chinese Academy of Sciences (Grant No. 2018490)the fundings from Anhui Provincial Department of Education (Grant No. YQZD2024061)Research Program of Higher Education Institutions in Anhui Province (Grant No. 2024AH050645)。
文摘Developing microwave electric field sensing based on Rydberg atoms has received significant attention due to its unique advantages. However, achieving effective coupling between Rydberg atoms and the microwave electric field in the sensing process is a challenging problem that greatly impacts the sensitivity. To address this, we propose using a microwave resonant cavity to enhance the effective coupling between the Rydberg atoms and the microwave electric field. In our experiment, Rydberg atoms are prepared via a three-photon excitation scheme, and the electric fields are measured without and with a microwave cavity in which the vapor cell is placed inside, respectively. As a result, we achieved an 18 dB enhancement of power sensitivity by adding the cavity,which is an effective enhancement in electric field pulse signal detection. This experimental testing provides a promising direction for enhancing the sensitivity of Rydberg atomic electric field sensors and paves the way for their application in precision electric field measurements.
基金National Natural Science Foundation of China(NSFC)(11274230,11574206)Basic Research Program of the Committee of Science and Technology of Shanghai(14JC1491700)
文摘Cavity optomechanics is applied to study the coupling behavior of interacting molecules in surface plasmon systems driven by two-color laser beams. Different from the traditional force–distance measurement, due to a resonant frequency shift or a peak splitting on the probe spectrum, we have proposed a convenient method to measure the van der Waals force strength and interaction energy via nonlinear spectroscopy. The minimum force value can reach approximately 10^(-15) N, which is 3 to 4 orders of magnitude smaller than the widely applied atomic force microscope(AFM). It is also shown that two adjacent molecules with similar chemical structures and nearly equal vibrational frequencies can be easily distinguished by the splitting of the transparency peak. Based on this coupled optomechanical system, we also conceptually design a tunable optical switch by van der Waals interaction. Our results will provide new approaches for understanding the complex and dynamic interactions inmolecule–plasmon systems.
基金This work was supported by the following projects:INTERNATIONAL COOPERATION Projects of the Ministry of Science and Technology(2014DFE60170)the Strategic Japanese-Swiss Science and Technology Program from the Swiss National Science Foundation(project No.IZJSZ2_180176)+4 种基金the Sino-Swiss Science and Technology Cooperation(SSSTC)2016 project from the Swiss National Science Foundation(project No.IZLCZ2_170294)the National Natural Science Foundation of China(Grant No.61674084)the Overseas Expertise Introduction Project for DisciplineInnovation of Higher Education of China(Grant No.B16027)Tianjin Science and Technology Project(Grant No.18ZXJMTG00220)the Fundamental Research Fund for the Central Universities of China.
文摘Electrochemical CO_(2) reduction driven by renewable electricity is one of the promising strategies to store sus-tainable energy as fuels.However,the selectivity of value-added multi-carbon products remains poor for further application of this process.Here,we regulate CO adsorption by forming a Nafion layer on the copper(Cu)electrode that is repulsive to OH^(-),contributing to enhanced selectivity of CO_(2) reduction to C_(2) products with the suppression of C 1 products.The operando Raman spectroscopy indicates that the local OH^(-)would adsorb on part of active sites and decrease the adsorption of CO.Therefore,the electrode with repulsive to OH^(-)can adjust the concentration of OH^(-),leading to the increased adsorption of CO and enhanced C–C coupling.This work shows that electrode design could be an effective strategy for improving the selectivity of CO_(2) reduction to multi-carbon products.
基金This work was supported by the National Basic Research Program of China （Nos. 2012CB315605 and 2014CB340002）, the National Natural Science Foundation of China （Grant Nos. 61210014,61321004, 61307024, 61574082 and 51561165012）, the High Technology Researeh and Development Program of China（No. 2015AA017101）, the Independent Research Program of Tsinghua University （No. 20131089364） and the Open Fund of State Key Laboratory on Integrated Optoelectronics （Nos. IOSKL2012KF08 and IOSKL2014KF09）.
文摘Laser annealing of silicon dioxide （SiO2） film formed by inductively coupled plasma enhanced chemical vapor deposition （ICPECVD）is studied for the fabrication of low loss silicon based waveguide. The influence of laser annealing on ICPECVD-deposited SiO2 film is investigated. The surface roughness, refractive index, and etch rate of annealed samples are compared with those of SiO2 film obtained by thermal oxidation. It is demonstrated that the performance of ICPECVD-deposited SiO2 film can be significantly improved by laser annealing. Al2O3/SIO2 waveguide has been fabricated on silicon substrate with the SiO2 lower cladding formed by ICPECVD and laser annealing process, and its propagation loss is found to be comparable with that of the waveguide with thermally oxidized lower cladding.
