Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
This paper discusses the numerical modeling of the dynamic coupled analysis of the floating platform and mooring/risers using the asynchronous coupling algorithm with the purpose to improve the computational efficienc...This paper discusses the numerical modeling of the dynamic coupled analysis of the floating platform and mooring/risers using the asynchronous coupling algorithm with the purpose to improve the computational efficiency when multiple lines are connected to the platform. The numerical model of the platform motion simulation in wave is presented. Additionally, how the asynchronous coupling algorithm is implemented during the dynamic coupling analysis is introduced. Through a comparison of the numerical results of our developed model with commercial software for a SPAR platform, the developed numerical model is checked and validated.展开更多
Dynamic optimization of electromechanical coupling system is a significant engineering problem in the field of mechatronics. The performance improvement of electromechanical equipment depends on the system design para...Dynamic optimization of electromechanical coupling system is a significant engineering problem in the field of mechatronics. The performance improvement of electromechanical equipment depends on the system design parameters. Aiming at the spindle unit of refitted machine tool for solid rocket, the vibration acceleration of tool is taken as objective function, and the electromechanical system design parameters are appointed as design variables. Dynamic optimization model is set up by adopting Lagrange-Maxwell equations, Park transform and electromechanical system energy equations. In the procedure of seeking high efficient optimization method, exponential function is adopted to be the weight function of particle swarm optimization algorithm. Exponential inertia weight particle swarm algorithm（EPSA）, is formed and applied to solve the dynamic optimization problem of electromechanical system. The probability density function of EPSA is presented and used to perform convergence analysis. After calculation, the optimized design parameters of the spindle unit are obtained in limited time period. The vibration acceleration of the tool has been decreased greatly by the optimized design parameters. The research job in the paper reveals that the problem of dynamic optimization of electromechanical system can be solved by the method of combining system dynamic analysis with reformed swarm particle optimizati on. Such kind of method can be applied in the design of robots, NC machine, and other electromechanical equipments.展开更多
The effect of gain-phase perturbations and mutual coupling significantly degrades the performance of digital array radar (DAR). This paper investigates array calibration problems in the scenario where the true locatio...The effect of gain-phase perturbations and mutual coupling significantly degrades the performance of digital array radar (DAR). This paper investigates array calibration problems in the scenario where the true locations of auxiliary sources deviate from nominal values but the angle intervals are known. A practical algorithm is proposed to jointly calibrate gain-phase errors and mutual coupling errors. Firstly, a simplified model of the distortion matrix is developed based on its special structure in uniform linear array (ULA). Then the model is employed to derive the precise locations of the auxiliary sources by one-dimension search. Finally, the least-squares estimation of the distortion matrix is obtained. The algorithm has the potential of achieving considerable improvement in calibration accuracy due to the reduction of unknown parameters. In addition, the algorithm is feasible for practical applications, since it requires only one auxiliary source with the help of rotation platforms. Simulation results demonstrate the validity, robustness and high performance of the proposed algorithm. Experiments were carried out using an S-band DAR test-bed. The results of measured data show that the proposed algorithm is practical and effective in application. (C) 2016 Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics.展开更多
Twenty orthosequences and their corresponding sea-level change (SLC) cycles have been recognized in the Devonian overlying the Caledonian unconformity, of which 9, 5.5 and 5.5 occurred in the Lower, Middle and Upper D...Twenty orthosequences and their corresponding sea-level change (SLC) cycles have been recognized in the Devonian overlying the Caledonian unconformity, of which 9, 5.5 and 5.5 occurred in the Lower, Middle and Upper Devonian respectively. They can be grouped into 4 orthosequence sets, in which the maximum flooding surfaces lie in the sulcutus Zone (D12), perbonus Zone (D13), Middle and Upper varcus Zone (D22) and gigas Zone (D21) respectively. Four instant palaeogeographical reconstructions of South China have been made in the Emsian and Givetian. Devonian sea-level change rhythms of South China can be divided into 3 categories: the autorhythmic, the worldwide and regional allorhythmic, and the coupling-rhythmic. They developed respectively in the Famennian, Pragian, Eifelian, Lochkovian, Emsian, Givetian, Frasnian and the F / F (between the Frasnian and Famennian) event. The cause of the worldwide allorhythmic SLC of the Pragian and Eifelian under comparatively dry, warm and tranquil conditions may be related to the pulsating expanding and contracting of the oceanic basin volume or the earth volume pulsation, rather than the common glaciation and plate tectonism. The coupling-rhythmic SLC related to the F/ F event is a sensitive indicator of the interaction between terrestrial and extraterrestrial factors, and coordinated action among the earth-spheres.展开更多
Although the study of TM(Thermo Mechanics),HM(Hydraulic-Mechanics) and THM(Thermo-Hydraulic-Mechanics) coupling under a loading test have been under development,rock failure analysis under THM coupling and unloading i...Although the study of TM(Thermo Mechanics),HM(Hydraulic-Mechanics) and THM(Thermo-Hydraulic-Mechanics) coupling under a loading test have been under development,rock failure analysis under THM coupling and unloading is an emerging topic.Based on a high temperature triaxial unloading seep test for phyllite,this paper discusses the deformation and failure mechanism of phyllites under the "H M,T→H,T→M" incomplete coupling model with unloading conditions.The results indicate that the elastic modulus and initial permeability decrease and the Poisson's ratio increases with increasing temperature;the elastic modulus decreases and the Poisson's ratio and initial permeability increase with increasing water pressure.During the unloading process,rock penetrability is small at the initial elastic deformation phase,but the penetrability increases near the end of the elastic deformation phase;mechanisms involving temperature and water pressure affect penetrability differently.Phyllite failure occurs from the initial thermal damage of the rock materials,splitting and softening(which is caused by pore water pressure),and the pressure difference which is formed from the loading axial pressure and unloading confining pressure.The phyllite failure mechanism is a transtensional(tension-shearing) failure.展开更多
Based on nine necessary basic assumptions for THM coupling model,this research comprehensively applied the theories of elastic mechanics,seepage mechanics and heat transfer,and established a real three-field and two-w...Based on nine necessary basic assumptions for THM coupling model,this research comprehensively applied the theories of elastic mechanics,seepage mechanics and heat transfer,and established a real three-field and two-way coupled mathematical model to reveal the connections among seepage field,deformation field and temperature field within the system of methane-containing coal.In comparison between numerical and analytical solutions,the coupling modeling for THM of methane-containing coal was proved to be correct by model application in the physical simulation experiment of coal and gas outburst.The model established in this paper was the improvement of traditional seepage theory of methane-containing coal and fluid-solid coupled model theory,which can be widely used in prevention of coal and gas outburst as well as exploitation of coal bed methane.展开更多
Based on analysis of thermo-hydro-mechanical-chemical(THMC)coupling mechanism for brittle rock,THMC coupling indicator in terms of rock porosity was introduced to represent the influencing degree of THMC coupling fiel...Based on analysis of thermo-hydro-mechanical-chemical(THMC)coupling mechanism for brittle rock,THMC coupling indicator in terms of rock porosity was introduced to represent the influencing degree of THMC coupling field on stress field in order to establish THMC coupling fracture criterion.A novel real-time measurement method of permeability(related to porosity)was proposed to determine the THMC coupling indicator,and self-designed THMC coupling tests and scanning electron microscope tests were conducted on pre-cracked red sandstone specimens to study the macroscopic and microscopic fracture mechanism.Research results show that the higher the hydraulic pressure is,the smaller the crack initiation load is and the easier the Mode I fracture occurs.Test results are in good agreement with prediction results(crack initiation load and angle,and fracture mode),which can verify the effectiveness of the newly established THMC coupling fracture criterion.This new fracture criterion can be also further extended to predict THMC coupling fracture of multi-crack problem.展开更多
Overall kinetic studies on the oxidative coupling of methane,OCM,have been conducted in a tubular fixed bed reactor,using perovskite titanate as the reaction catalyst.The appropriate operating conditions were found to...Overall kinetic studies on the oxidative coupling of methane,OCM,have been conducted in a tubular fixed bed reactor,using perovskite titanate as the reaction catalyst.The appropriate operating conditions were found to be：temperature 750-775 ℃,total feed flow rate of 160 ml/min,CH4 /O2 ratio of 2 and GHSV of 100·min-1 .Under these conditions,C 2 yield of 28% was achieved.Correlations of the kinetic data have been performed with lumped rate equations for C2 and COx formation as functions of temperature,O2 and CH4 partial pressures.Six models have been selected among the common lumped kinetic models.The selected models have been regressed with the experimental data which were obtained from the Catatest system by genetic algorithm in order to obtain optimized parameters.The kinetic coefficients in the overall reactions were optimized by different numerical optimization methods such as：the Levenberg-Marquardt and genetic algorithms and the results were compared with one another.It has been found that the Santamaria model is in good agreement with the experimental data.The Arrhenius parameters of this model have been obtained by linear regression.It should be noted that the Marquardt algorithm is sensitive to the first guesses and there is possibility to trap in the relative minimum.展开更多
The reaction kinetics of oxidative coupling of methane catalyzed by perovskite was studied in a fixed bed flow reactor.At atmospheric pressure,the reactions were carried out at 725,750 and 775℃,inlet methane to oxyge...The reaction kinetics of oxidative coupling of methane catalyzed by perovskite was studied in a fixed bed flow reactor.At atmospheric pressure,the reactions were carried out at 725,750 and 775℃,inlet methane to oxygen ratios of 2 to 4.5 and gas hourly space velocity （GHSV） of 100 min^-1.Correlation of the kinetic data has been performed with the proposed mechanisms.The selected equations have been regressed with experimental data accompanied by genetic algorithm （GA） in order to obtain optimized parameters.After investigation the Langmuir-Hinshelwood mechanism was selected as the best mechanism,and Arrhenius and adsorption parameters of this model were obtained by linear regression.In this research the Marquardt algorithm was also used and its results were compared with those of genetic algorithm.It should be noted that the Marquardt algorithm is sensitive to the selection of initial values and there is possibility to trap in a local minimum.展开更多
In order to overcome the phenomenon of image blur and edge loss in the process of collecting and transmitting medical image,a denoising method of medical image based on discrete wavelet transform(DWT)and modified medi...In order to overcome the phenomenon of image blur and edge loss in the process of collecting and transmitting medical image,a denoising method of medical image based on discrete wavelet transform(DWT)and modified median filter for medical image coupling denoising is proposed.The method is composed of four modules:image acquisition,image storage,image processing and image reconstruction.Image acquisition gets the medical image that contains Gaussian noise and impulse noise.Image storage includes the preservation of data and parameters of the original image and processed image.In the third module,the medical image is decomposed as four sub bands(LL,HL,LH,HH)by wavelet decomposition,where LL is low frequency,LH,HL,HH are respective for horizontal,vertical and in the diagonal line high frequency component.Using improved wavelet threshold to process high frequency coefficients and retain low frequency coefficients,the modified median filtering is performed on three high frequency sub bands after wavelet threshold processing.The last module is image reconstruction,which means getting the image after denoising by wavelet reconstruction.The advantage of this method is combining the advantages of median filter and wavelet to make the denoising effect better,not a simple combination of the two previous methods.With DWT and improved median filter coefficients coupling denoising,it is highly practical for high-precision medical images containing complex noises.The experimental results of proposed algorithm are compared with the results of median filter,wavelet transform,contourlet and DT-CWT,etc.According to visual evaluation index PSNR and SNR and Canny edge detection,in low noise images,PSNR and SNR increase by 10%–15%;in high noise images,PSNR and SNR increase by 2%–6%.The experimental results of the proposed algorithm achieved better acceptable results compared with other methods,which provides an important method for the diagnosis of medical condition.展开更多
We propose a method for estimating the mutual coupling coefficient among antennas in this paper which is based on the principle of signal subspace and the simulated annealing （SA） algorithm. The computer simulation ...We propose a method for estimating the mutual coupling coefficient among antennas in this paper which is based on the principle of signal subspace and the simulated annealing （SA） algorithm. The computer simulation has been conducted to illustrate the＇ excellent performance of this method and to demonstrate that it is statistically efficient. The benefit of this new method is that calibration signals and unknown signals can be received simultaneously, during the course of calibration.展开更多
Permeability is a vital property of rock mass, which is highly affected by tectonic stress and human engineering activities. A comprehensive monitoring of pore pressure and flow rate distributions inside the rock mass...Permeability is a vital property of rock mass, which is highly affected by tectonic stress and human engineering activities. A comprehensive monitoring of pore pressure and flow rate distributions inside the rock mass is very important to elucidate the permeability evolution mechanisms, which is difficult to realize in laboratory, but easy to be achieved in numerical simulations. Therefore, the particle flow code （PFC）, a discrete element method, is used to simulate permeability behaviors of rock materials in this study. Owe to the limitation of the existed solid-fluid coupling algorithm in PFC, an improved flow-coupling algorithm is presented to better reflect the preferential flow in rock fractures. The comparative analysis is conducted between original and improved algorithm when simulating rock permeability evolution during triaxial compression, showing that the improved algorithm can better describe the experimental phenomenon. Furthermore, the evolution of pore pressure and flow rate distribution during the flow process are analyzed by using the improved algorithm. It is concluded that during the steady flow process in the fractured specimen, the pore pressure and flow rate both prefer transmitting through the fractures rather than rock matrix. Based on the results, fractures are divided into the following three types： I） fractures link to both the inlet and outlet, II） fractures only link to the inlet, and III） fractures only link to the outlet. The type I fracture is always the preferential propagating path for both the pore pressure and flow rate. For type II fractures, the pore pressure increases and then becomes steady. However, the flow rate increases first and begins to decrease after the flow reaches the stop end of the fracture and finally vanishes. There is no obvious pore pressure or flow rate concentration within type III fractures.展开更多
A new electrical method of conductive carbon-film(with waterproof and anticorrosion ability)was proposed to continuously measure crack propagation rate of brittle rock under THMC coupling condition.A self-designed cou...A new electrical method of conductive carbon-film(with waterproof and anticorrosion ability)was proposed to continuously measure crack propagation rate of brittle rock under THMC coupling condition.A self-designed coupling testing system was used to conduct THMC coupling fracture tests of the pre-cracked red sandstone specimens(where the temperature is only changed)by this new electrical method of conductive carbon-film.Calculation results obtained by the energy method coincide well with the test results.And the higher the temperature is,the earlier the crack is initiated and the larger the crack propagation rate and accelerated velocity are,which can prove the validity of the new electrical method.This new electrical method has advantages of continuously measuring crack propagation rate over the conventional electrical,optical and acoustic methods,and can provide important basis for safety assessment and cracking-arrest design of deep rock mass engineering.展开更多
The analysis of the coupling mechanism of thermal-hydraulic-mechanical(THM)fields,and solid-liquidgas(SLG)phases during gas extraction process is of profound significance to explore its numerical application in the ga...The analysis of the coupling mechanism of thermal-hydraulic-mechanical(THM)fields,and solid-liquidgas(SLG)phases during gas extraction process is of profound significance to explore its numerical application in the gas occurrence regularity and its effective extraction radius.In this study,the Hudi coal mine in Qinshui basin is taken as the research area,the influencing factors of gas occurrence were analyzed,the differences in overburden load for gas pressure distribution and the factors influencing the effective extraction radius were further discussed by using the COMSOL software.The results show that the derivation of mathematical model in gas extraction shows that the process is a process the THM fields restrict each other,and the SLG phases influence each other.The longer the extraction time,the larger the influencing range of borehole,and the better the extraction effect.The larger the diameter of borehole,the larger the effective extraction radius,and the influence on gas extraction effect is smaller in the early stage and larger in the late stage.The borehole arrangement should be flexibly arranged according to the actual extraction situation.The higher the porosity,the higher the permeability,the better the gas extraction effect.The larger the overburden load of reservoir,the stronger the effective stress,which will result in the more severe the strain,and the closure of pore and fracture,which in turn will lead to the decrease of permeability and slow down the gas extraction.The relationship among extraction time,borehole diameter,negative pressure of gas extraction,permeability with effective extraction radius is exponential.This study has important theoretical and practical significance for clarifying and summarizing the gas occurrence regularity and its engineering practice.展开更多
In this paper, a novel algorithm is presented for direction of arrival（DOA） estimation and array self-calibration in the presence of unknown mutual coupling. In order to highlight the relationship between the array ...In this paper, a novel algorithm is presented for direction of arrival（DOA） estimation and array self-calibration in the presence of unknown mutual coupling. In order to highlight the relationship between the array output and mutual coupling coefficients, we present a novel model of the array output with the unknown mutual coupling coefficients. Based on this model, we use the space alternating generalized expectation-maximization（SAGE） algorithm to jointly estimate the DOA parameters and the mutual coupling coefficients. Unlike many existing counterparts, our method requires neither calibration sources nor initial calibration information. At the same time,our proposed method inherits the characteristics of good convergence and high estimation precision of the SAGE algorithm. By numerical experiments we demonstrate that our proposed method outperforms the existing method for DOA estimation and mutual coupling calibration.展开更多
The fully developed turbulence can be regarded as a nonlinear system,with wave coupling inside,which causes the nonlinear energy to transfer,and drives the turbulence to develop further or be suppressed.Spectral analy...The fully developed turbulence can be regarded as a nonlinear system,with wave coupling inside,which causes the nonlinear energy to transfer,and drives the turbulence to develop further or be suppressed.Spectral analysis is one of the most effective methods to study turbulence system.In order to apply it to the study of the nonlinear wave coupling process of edge plasma turbulence,an efficient algorithm based on spectral analysis technology is proposed to solve the nonlinear wave coupling equation.The algorithm is based on a mandatory temporal static condition with the nonideal spectra separated from the ideal spectra.The realization idea and programing flow are given.According to the characteristics of plasma turbulence,the simulation data are constructed and used to verify the algorithm and its implementation program.The simulation results and experimental results show the accuracy of the algorithm and the corresponding program,which can play a great role in the studying the energy transfer in edge plasma turbulences.As an application,the energy cascade analysis of typical edge plasma turbulence is carried out by using the results of a case calculation.Consequently,a physical picture of the energy transfer in a kind of fully developed turbulence is constructed,which confirms that the energy transfer in this turbulent system develops from lower-frequency region to higher-frequency region and from linear growing wave to damping wave.展开更多
Through the construction of a new ramp function, the element-flee Galerkin method and finite element coupling method were applied to the whole field, and was made fit for the structure of element nodes within the inte...Through the construction of a new ramp function, the element-flee Galerkin method and finite element coupling method were applied to the whole field, and was made fit for the structure of element nodes within the interface regions, both satisfying the essential boundary conditions and deploying meshless nodes and finite elements in a convenient and flexible way, which can meet the requirements of computation for complicated field. The comparison between the results of the present study and the corresponding analytical solutions shows this method is feasible and effective.展开更多
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
基金Supported by the National Natural Science Foundation of China under Grant No.51109040
文摘This paper discusses the numerical modeling of the dynamic coupled analysis of the floating platform and mooring/risers using the asynchronous coupling algorithm with the purpose to improve the computational efficiency when multiple lines are connected to the platform. The numerical model of the platform motion simulation in wave is presented. Additionally, how the asynchronous coupling algorithm is implemented during the dynamic coupling analysis is introduced. Through a comparison of the numerical results of our developed model with commercial software for a SPAR platform, the developed numerical model is checked and validated.
基金supported by National Natural Science Foundation of China (Grant No. 50675095)
文摘Dynamic optimization of electromechanical coupling system is a significant engineering problem in the field of mechatronics. The performance improvement of electromechanical equipment depends on the system design parameters. Aiming at the spindle unit of refitted machine tool for solid rocket, the vibration acceleration of tool is taken as objective function, and the electromechanical system design parameters are appointed as design variables. Dynamic optimization model is set up by adopting Lagrange-Maxwell equations, Park transform and electromechanical system energy equations. In the procedure of seeking high efficient optimization method, exponential function is adopted to be the weight function of particle swarm optimization algorithm. Exponential inertia weight particle swarm algorithm（EPSA）, is formed and applied to solve the dynamic optimization problem of electromechanical system. The probability density function of EPSA is presented and used to perform convergence analysis. After calculation, the optimized design parameters of the spindle unit are obtained in limited time period. The vibration acceleration of the tool has been decreased greatly by the optimized design parameters. The research job in the paper reveals that the problem of dynamic optimization of electromechanical system can be solved by the method of combining system dynamic analysis with reformed swarm particle optimizati on. Such kind of method can be applied in the design of robots, NC machine, and other electromechanical equipments.
基金supported by the National Natural Science Foundation of China (No. 61571449)
文摘The effect of gain-phase perturbations and mutual coupling significantly degrades the performance of digital array radar (DAR). This paper investigates array calibration problems in the scenario where the true locations of auxiliary sources deviate from nominal values but the angle intervals are known. A practical algorithm is proposed to jointly calibrate gain-phase errors and mutual coupling errors. Firstly, a simplified model of the distortion matrix is developed based on its special structure in uniform linear array (ULA). Then the model is employed to derive the precise locations of the auxiliary sources by one-dimension search. Finally, the least-squares estimation of the distortion matrix is obtained. The algorithm has the potential of achieving considerable improvement in calibration accuracy due to the reduction of unknown parameters. In addition, the algorithm is feasible for practical applications, since it requires only one auxiliary source with the help of rotation platforms. Simulation results demonstrate the validity, robustness and high performance of the proposed algorithm. Experiments were carried out using an S-band DAR test-bed. The results of measured data show that the proposed algorithm is practical and effective in application. (C) 2016 Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics.
基金Jointly supported by the Special Research Foundation for Doctorate Programme of CollegesUniversities of the State Education Commission of China (No. 9549111), Fundamental Research Project from the State Commission of Science and Technology of ChinaNa
文摘Twenty orthosequences and their corresponding sea-level change (SLC) cycles have been recognized in the Devonian overlying the Caledonian unconformity, of which 9, 5.5 and 5.5 occurred in the Lower, Middle and Upper Devonian respectively. They can be grouped into 4 orthosequence sets, in which the maximum flooding surfaces lie in the sulcutus Zone (D12), perbonus Zone (D13), Middle and Upper varcus Zone (D22) and gigas Zone (D21) respectively. Four instant palaeogeographical reconstructions of South China have been made in the Emsian and Givetian. Devonian sea-level change rhythms of South China can be divided into 3 categories: the autorhythmic, the worldwide and regional allorhythmic, and the coupling-rhythmic. They developed respectively in the Famennian, Pragian, Eifelian, Lochkovian, Emsian, Givetian, Frasnian and the F / F (between the Frasnian and Famennian) event. The cause of the worldwide allorhythmic SLC of the Pragian and Eifelian under comparatively dry, warm and tranquil conditions may be related to the pulsating expanding and contracting of the oceanic basin volume or the earth volume pulsation, rather than the common glaciation and plate tectonism. The coupling-rhythmic SLC related to the F/ F event is a sensitive indicator of the interaction between terrestrial and extraterrestrial factors, and coordinated action among the earth-spheres.
基金supported by National Natural Science Foundation of China (Grant No. 41102189,No. 41002110 and No. 41230635)Projects of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Grant No. SKLGP2009Z002,No. SKLGP2009Z012)Research Fund for the Doctoral Program of Higher Education of China(Grant No. 20105122110008)
文摘Although the study of TM(Thermo Mechanics),HM(Hydraulic-Mechanics) and THM(Thermo-Hydraulic-Mechanics) coupling under a loading test have been under development,rock failure analysis under THM coupling and unloading is an emerging topic.Based on a high temperature triaxial unloading seep test for phyllite,this paper discusses the deformation and failure mechanism of phyllites under the "H M,T→H,T→M" incomplete coupling model with unloading conditions.The results indicate that the elastic modulus and initial permeability decrease and the Poisson's ratio increases with increasing temperature;the elastic modulus decreases and the Poisson's ratio and initial permeability increase with increasing water pressure.During the unloading process,rock penetrability is small at the initial elastic deformation phase,but the penetrability increases near the end of the elastic deformation phase;mechanisms involving temperature and water pressure affect penetrability differently.Phyllite failure occurs from the initial thermal damage of the rock materials,splitting and softening(which is caused by pore water pressure),and the pressure difference which is formed from the loading axial pressure and unloading confining pressure.The phyllite failure mechanism is a transtensional(tension-shearing) failure.
基金supported in part by the State Key Basic Research Program of China(No.2011CB201203)the General Project of the National Natural Science Foundation of China(No.50974141)+1 种基金the Key Project of the National Natural Science Foundation of China(No.50534080)the Key Special Subjects National Science and Technology of China(No.2011ZX05034-004)
文摘Based on nine necessary basic assumptions for THM coupling model,this research comprehensively applied the theories of elastic mechanics,seepage mechanics and heat transfer,and established a real three-field and two-way coupled mathematical model to reveal the connections among seepage field,deformation field and temperature field within the system of methane-containing coal.In comparison between numerical and analytical solutions,the coupling modeling for THM of methane-containing coal was proved to be correct by model application in the physical simulation experiment of coal and gas outburst.The model established in this paper was the improvement of traditional seepage theory of methane-containing coal and fluid-solid coupled model theory,which can be widely used in prevention of coal and gas outburst as well as exploitation of coal bed methane.
基金The authors are grateful for the financial supports from the National Natural Science Foundation of China(Nos.51474251,51874351)the Excellent Postdoctoral Innovative Talents Project of Hunan Province,China(No.2020RC2001).
文摘Based on analysis of thermo-hydro-mechanical-chemical(THMC)coupling mechanism for brittle rock,THMC coupling indicator in terms of rock porosity was introduced to represent the influencing degree of THMC coupling field on stress field in order to establish THMC coupling fracture criterion.A novel real-time measurement method of permeability(related to porosity)was proposed to determine the THMC coupling indicator,and self-designed THMC coupling tests and scanning electron microscope tests were conducted on pre-cracked red sandstone specimens to study the macroscopic and microscopic fracture mechanism.Research results show that the higher the hydraulic pressure is,the smaller the crack initiation load is and the easier the Mode I fracture occurs.Test results are in good agreement with prediction results(crack initiation load and angle,and fracture mode),which can verify the effectiveness of the newly established THMC coupling fracture criterion.This new fracture criterion can be also further extended to predict THMC coupling fracture of multi-crack problem.
基金supported by Iran Polymer and Petrochemical Institute (IPPI)
文摘Overall kinetic studies on the oxidative coupling of methane,OCM,have been conducted in a tubular fixed bed reactor,using perovskite titanate as the reaction catalyst.The appropriate operating conditions were found to be：temperature 750-775 ℃,total feed flow rate of 160 ml/min,CH4 /O2 ratio of 2 and GHSV of 100·min-1 .Under these conditions,C 2 yield of 28% was achieved.Correlations of the kinetic data have been performed with lumped rate equations for C2 and COx formation as functions of temperature,O2 and CH4 partial pressures.Six models have been selected among the common lumped kinetic models.The selected models have been regressed with the experimental data which were obtained from the Catatest system by genetic algorithm in order to obtain optimized parameters.The kinetic coefficients in the overall reactions were optimized by different numerical optimization methods such as：the Levenberg-Marquardt and genetic algorithms and the results were compared with one another.It has been found that the Santamaria model is in good agreement with the experimental data.The Arrhenius parameters of this model have been obtained by linear regression.It should be noted that the Marquardt algorithm is sensitive to the first guesses and there is possibility to trap in the relative minimum.
基金supported by the Iran Polymer and Petrochemical Institute (IPPI)
文摘The reaction kinetics of oxidative coupling of methane catalyzed by perovskite was studied in a fixed bed flow reactor.At atmospheric pressure,the reactions were carried out at 725,750 and 775℃,inlet methane to oxygen ratios of 2 to 4.5 and gas hourly space velocity （GHSV） of 100 min^-1.Correlation of the kinetic data has been performed with the proposed mechanisms.The selected equations have been regressed with experimental data accompanied by genetic algorithm （GA） in order to obtain optimized parameters.After investigation the Langmuir-Hinshelwood mechanism was selected as the best mechanism,and Arrhenius and adsorption parameters of this model were obtained by linear regression.In this research the Marquardt algorithm was also used and its results were compared with those of genetic algorithm.It should be noted that the Marquardt algorithm is sensitive to the selection of initial values and there is possibility to trap in a local minimum.
基金Project(2016JJ4074)supported by the Natural Science Foundation of Hunan Province,ChinaProject(14C0920)supported by the Hunan Provincial Education Department,ChinaProject(61771191)supported by the National Natural Science Foundation of China
文摘In order to overcome the phenomenon of image blur and edge loss in the process of collecting and transmitting medical image,a denoising method of medical image based on discrete wavelet transform(DWT)and modified median filter for medical image coupling denoising is proposed.The method is composed of four modules:image acquisition,image storage,image processing and image reconstruction.Image acquisition gets the medical image that contains Gaussian noise and impulse noise.Image storage includes the preservation of data and parameters of the original image and processed image.In the third module,the medical image is decomposed as four sub bands(LL,HL,LH,HH)by wavelet decomposition,where LL is low frequency,LH,HL,HH are respective for horizontal,vertical and in the diagonal line high frequency component.Using improved wavelet threshold to process high frequency coefficients and retain low frequency coefficients,the modified median filtering is performed on three high frequency sub bands after wavelet threshold processing.The last module is image reconstruction,which means getting the image after denoising by wavelet reconstruction.The advantage of this method is combining the advantages of median filter and wavelet to make the denoising effect better,not a simple combination of the two previous methods.With DWT and improved median filter coefficients coupling denoising,it is highly practical for high-precision medical images containing complex noises.The experimental results of proposed algorithm are compared with the results of median filter,wavelet transform,contourlet and DT-CWT,etc.According to visual evaluation index PSNR and SNR and Canny edge detection,in low noise images,PSNR and SNR increase by 10%–15%;in high noise images,PSNR and SNR increase by 2%–6%.The experimental results of the proposed algorithm achieved better acceptable results compared with other methods,which provides an important method for the diagnosis of medical condition.
基金Supported by the 863 High Technology Project ofChina (2001AA631050)
文摘We propose a method for estimating the mutual coupling coefficient among antennas in this paper which is based on the principle of signal subspace and the simulated annealing （SA） algorithm. The computer simulation has been conducted to illustrate the＇ excellent performance of this method and to demonstrate that it is statistically efficient. The benefit of this new method is that calibration signals and unknown signals can be received simultaneously, during the course of calibration.
基金Project（BK20150005） supported by the Natural Science Foundation of Jiangsu Province for Distinguished Young Scholars, China Project（2015XKZD05） supported by the Fundamental Research Funds for the Central Universities, China
文摘Permeability is a vital property of rock mass, which is highly affected by tectonic stress and human engineering activities. A comprehensive monitoring of pore pressure and flow rate distributions inside the rock mass is very important to elucidate the permeability evolution mechanisms, which is difficult to realize in laboratory, but easy to be achieved in numerical simulations. Therefore, the particle flow code （PFC）, a discrete element method, is used to simulate permeability behaviors of rock materials in this study. Owe to the limitation of the existed solid-fluid coupling algorithm in PFC, an improved flow-coupling algorithm is presented to better reflect the preferential flow in rock fractures. The comparative analysis is conducted between original and improved algorithm when simulating rock permeability evolution during triaxial compression, showing that the improved algorithm can better describe the experimental phenomenon. Furthermore, the evolution of pore pressure and flow rate distribution during the flow process are analyzed by using the improved algorithm. It is concluded that during the steady flow process in the fractured specimen, the pore pressure and flow rate both prefer transmitting through the fractures rather than rock matrix. Based on the results, fractures are divided into the following three types： I） fractures link to both the inlet and outlet, II） fractures only link to the inlet, and III） fractures only link to the outlet. The type I fracture is always the preferential propagating path for both the pore pressure and flow rate. For type II fractures, the pore pressure increases and then becomes steady. However, the flow rate increases first and begins to decrease after the flow reaches the stop end of the fracture and finally vanishes. There is no obvious pore pressure or flow rate concentration within type III fractures.
基金Projects(51474251,51874351) supported by the National Natural Science Foundation of China
文摘A new electrical method of conductive carbon-film(with waterproof and anticorrosion ability)was proposed to continuously measure crack propagation rate of brittle rock under THMC coupling condition.A self-designed coupling testing system was used to conduct THMC coupling fracture tests of the pre-cracked red sandstone specimens(where the temperature is only changed)by this new electrical method of conductive carbon-film.Calculation results obtained by the energy method coincide well with the test results.And the higher the temperature is,the earlier the crack is initiated and the larger the crack propagation rate and accelerated velocity are,which can prove the validity of the new electrical method.This new electrical method has advantages of continuously measuring crack propagation rate over the conventional electrical,optical and acoustic methods,and can provide important basis for safety assessment and cracking-arrest design of deep rock mass engineering.
基金financially supported by the University Synergy Innovation Program of Anhui Province(No.GXXT-2021-018)the National Natural Science Foundation of China(No.42102217)+3 种基金the Natural Science Research Project of Anhui University(Nos.KJ2020A0315,KJ2020A0317)the Institute of Energy,Hefei Comprehensive National Science Center(No.21KZS218)the Natural Science Foundation of Anhui Province(No.2108085MD134)the Foundation of State Key Laboratory of Petroleum Resources and Prospecting,China University of Petroleum,Beijing(No.PRP/open-2005)
文摘The analysis of the coupling mechanism of thermal-hydraulic-mechanical(THM)fields,and solid-liquidgas(SLG)phases during gas extraction process is of profound significance to explore its numerical application in the gas occurrence regularity and its effective extraction radius.In this study,the Hudi coal mine in Qinshui basin is taken as the research area,the influencing factors of gas occurrence were analyzed,the differences in overburden load for gas pressure distribution and the factors influencing the effective extraction radius were further discussed by using the COMSOL software.The results show that the derivation of mathematical model in gas extraction shows that the process is a process the THM fields restrict each other,and the SLG phases influence each other.The longer the extraction time,the larger the influencing range of borehole,and the better the extraction effect.The larger the diameter of borehole,the larger the effective extraction radius,and the influence on gas extraction effect is smaller in the early stage and larger in the late stage.The borehole arrangement should be flexibly arranged according to the actual extraction situation.The higher the porosity,the higher the permeability,the better the gas extraction effect.The larger the overburden load of reservoir,the stronger the effective stress,which will result in the more severe the strain,and the closure of pore and fracture,which in turn will lead to the decrease of permeability and slow down the gas extraction.The relationship among extraction time,borehole diameter,negative pressure of gas extraction,permeability with effective extraction radius is exponential.This study has important theoretical and practical significance for clarifying and summarizing the gas occurrence regularity and its engineering practice.
基金supported by the National Natural Science Foundation of China (No. 61302141)
文摘In this paper, a novel algorithm is presented for direction of arrival（DOA） estimation and array self-calibration in the presence of unknown mutual coupling. In order to highlight the relationship between the array output and mutual coupling coefficients, we present a novel model of the array output with the unknown mutual coupling coefficients. Based on this model, we use the space alternating generalized expectation-maximization（SAGE） algorithm to jointly estimate the DOA parameters and the mutual coupling coefficients. Unlike many existing counterparts, our method requires neither calibration sources nor initial calibration information. At the same time,our proposed method inherits the characteristics of good convergence and high estimation precision of the SAGE algorithm. By numerical experiments we demonstrate that our proposed method outperforms the existing method for DOA estimation and mutual coupling calibration.
基金supported by the National Key Research and Development Program of China(Grant No.2017YFE0301200)the National Natural Science Foundation of China(Grant Nos.12075077 and 12175055)the Science and Technology Project of Sichuan Pprovince,China(Grant No.2020YJ0464)。
文摘The fully developed turbulence can be regarded as a nonlinear system,with wave coupling inside,which causes the nonlinear energy to transfer,and drives the turbulence to develop further or be suppressed.Spectral analysis is one of the most effective methods to study turbulence system.In order to apply it to the study of the nonlinear wave coupling process of edge plasma turbulence,an efficient algorithm based on spectral analysis technology is proposed to solve the nonlinear wave coupling equation.The algorithm is based on a mandatory temporal static condition with the nonideal spectra separated from the ideal spectra.The realization idea and programing flow are given.According to the characteristics of plasma turbulence,the simulation data are constructed and used to verify the algorithm and its implementation program.The simulation results and experimental results show the accuracy of the algorithm and the corresponding program,which can play a great role in the studying the energy transfer in edge plasma turbulences.As an application,the energy cascade analysis of typical edge plasma turbulence is carried out by using the results of a case calculation.Consequently,a physical picture of the energy transfer in a kind of fully developed turbulence is constructed,which confirms that the energy transfer in this turbulent system develops from lower-frequency region to higher-frequency region and from linear growing wave to damping wave.
文摘Through the construction of a new ramp function, the element-flee Galerkin method and finite element coupling method were applied to the whole field, and was made fit for the structure of element nodes within the interface regions, both satisfying the essential boundary conditions and deploying meshless nodes and finite elements in a convenient and flexible way, which can meet the requirements of computation for complicated field. The comparison between the results of the present study and the corresponding analytical solutions shows this method is feasible and effective.
