The axle box bearings of high-speed trains often operate in extremely harsh environments,bearing loads from different directions.Long-term operation and frequent changes in working conditions can easily lead to axle b...The axle box bearings of high-speed trains often operate in extremely harsh environments,bearing loads from different directions.Long-term operation and frequent changes in working conditions can easily lead to axle box bearing failures.Therefore,it is extremely important to study the mechanism of axle box bearings.Firstly,the medium of thermal deformation establishes a coupling relationship between the system dynamics model and the thermal grid model,and then obtains the thermal force coupling model of the high-speed train axle box bearing.The coupling model is validated from the perspectives of system dynamics response and temperature response,proving its effectiveness in system dynamics response and temperature characteristic response.Comparing the coupling model with the dynamics model,it is found that thermal deformation complicates the dynamic re-sponse.Finally,using the Lundberg-Palmgren(L-P)bearing fatigue calculation method and damage accumu-lation theory,the bearing fatigue life is calculated,and it is found that thermal deformation deteriorates the bearing operating environment,reducing the bearing fatigue life.Finally,by comparing the bearing fatigue life under different working conditions,it is concluded that the faster the vehicle speed,the greater the load,and the smaller the initial radial clearance of the bearing,the fatigue life of the bearing is reduced.The shorter the lifespan.展开更多
Deep rock engineering is affected by coupled thermo-hydro-mechanical(THM)-dynamic fields,necessitating the elucidation of the dynamic mechanical behavior and failure mechanisms.This study utilized a Multi-field Couple...Deep rock engineering is affected by coupled thermo-hydro-mechanical(THM)-dynamic fields,necessitating the elucidation of the dynamic mechanical behavior and failure mechanisms.This study utilized a Multi-field Coupled Controlled Split Hopkinson Pressure Bar(MCC-SHPB)system to elucidate the cross-scale dynamic responses of rocks and the boundaries of failure modes under THM coupling.Impact tests were conducted on green sandstone under coupled conditions of temperature(25℃-80℃),confining pressure(0-15 MPa),and seepage water pressure(0-15 MPa).Scanning electron microscopy(SEM)microstructural characterization and COMSOL Multiphysics numerical simulations were conducted,and a dynamic constitutive theoretical framework and failure-prediction methodology were established.We investigated the impact toughness index(I_(t)),dynamic modulus(E_(d)),dynamic triaxial compressive strength(TCS_(d)),fragmentation degree(W),and failure modes of green sandstone under thermo-confining pressure-seepage-impact loading conditions.The key findings reveal that the(I_(t))reflects different energy regulation mechanisms across different confining pressure regimes.Thermal-microcrack interactions dominate at low pressure,and energy absorption prevails at high pressure.A triphasic dynamic modulus model captures stiffness evolution under energy-driven conditions,revealing cross-scale crack nucleation-propagation and fragment reorganization.The TCSd inflection point signifies energy dissipation shifts,causing nonlinear skeleton bearing-capacity degradation.A critical criterion based on the W was established to distinguish between the two failure modes and predict the unstable failure initiation.Numerical simulations were used to elucidate the effects of inertia-dominated crack propagation and stress wave interference,validating the critical criterion and the predictive accuracy of the theoretical model during cross-scale failure.This study provides a theoretical foundation for assessing the dynamic stability of rock masses subjected to multi-field coupling during deep resource exploitation.展开更多
To investigate the effects of water and cyclic loading on dolomite’s mechanical properties during deep mining,mechanical experiments on non-pressure water absorption and cyclic loading were conducted.The findings rev...To investigate the effects of water and cyclic loading on dolomite’s mechanical properties during deep mining,mechanical experiments on non-pressure water absorption and cyclic loading were conducted.The findings reveal that the elastic modulus and Poisson ratio of dolomite fluctuate with increasing water content.The mass of water absorption is positively correlated with time and the water absorption stage can be divided into three stages:accelerated,decelerated,and stabilized stages.During this process,the number of pores in dolomite increases,while the pore diameter initially decreases and then fluctuates.Microscopic analysis shows that the proportion of mesopores first increases and then decreases,while micropores exhibit the opposite trend,and the proportion of macropores fluctuates around 0%.A model diagram of structural evolution during water absorption has been developed.Additionally,the softening process of dolomite’s water absorption strength is categorized into three stages:a relatively stable stage,an accelerated softening stage dominated by mesopore water absorption,and a decelerated softening stage characterized by micropore water absorption.A uniaxial damage constitutive model for dolomite under water influence was established based on the Weibull distribution and Mohr-Coulomb strength criterion,and experimental validation indicates its strong applicability.展开更多
The Electro–Hydrostatic Actuator(EHA)is applied to drive the control surface in flightcontrol system of more electric aircraft.In EHA,the Oil-Immersed Motor Pump(OMP)serves asthe core as a power assembly.However,the ...The Electro–Hydrostatic Actuator(EHA)is applied to drive the control surface in flightcontrol system of more electric aircraft.In EHA,the Oil-Immersed Motor Pump(OMP)serves asthe core as a power assembly.However,the compact integration of the OMP presents challenges inefficiently dissipating internal heat,leading to a performance degradation of the EHA due to ele-vated temperatures.Therefore,accurately modeling and predicting the internal thermal dynamicsof the OMP hold considerable significance for monitoring the operational condition of the EHA.In view of this,a modeling method considering cumulative thermal coupling was hereby proposed.Based on the proposed method,the thermal models of the motor and the pump were established,taking into account heat accumulation and transfer.Taking the leakage oil as the heat couplingpoint between the motor and the pump,the dynamic thermal coupling model of the OMP wasdeveloped,with the thermal characteristics of the oil considered.Additionally,the comparativeexperiments were conducted to illustrate the efficiency of the proposed model.The experimentalresults demonstrate that the proposed dynamic thermal coupling model accurately captured thethermal behavior of OMP,outperforming the static thermal parameter model.Overall,thisadvancement is crucial for effectively monitoring the health of EHA and ensuring flight safety.展开更多
Within the prefrontal-cingulate cortex,abnormalities in coupling between neuronal networks can disturb the emotion-cognition interactions,contributing to the development of mental disorders such as depression.Despite ...Within the prefrontal-cingulate cortex,abnormalities in coupling between neuronal networks can disturb the emotion-cognition interactions,contributing to the development of mental disorders such as depression.Despite this understanding,the neural circuit mechanisms underlying this phenomenon remain elusive.In this study,we present a biophysical computational model encompassing three crucial regions,including the dorsolateral prefrontal cortex,subgenual anterior cingulate cortex,and ventromedial prefrontal cortex.The objective is to investigate the role of coupling relationships within the prefrontal-cingulate cortex networks in balancing emotions and cognitive processes.The numerical results confirm that coupled weights play a crucial role in the balance of emotional cognitive networks.Furthermore,our model predicts the pathogenic mechanism of depression resulting from abnormalities in the subgenual cortex,and network functionality was restored through intervention in the dorsolateral prefrontal cortex.This study utilizes computational modeling techniques to provide an insight explanation for the diagnosis and treatment of depression.展开更多
With the miniaturization of devices and the development of modern heating technologies,the generalization of heat conduction and thermoelastic coupling has become crucial,effectively emulating the thermodynamic behavi...With the miniaturization of devices and the development of modern heating technologies,the generalization of heat conduction and thermoelastic coupling has become crucial,effectively emulating the thermodynamic behavior of materials in ultrashort time scales.Theoretically,generalized heat conductive models are considered in this work.By analogy with mechanical viscoelastic models,this paper further enriches the heat conduction models and gives their one-dimensional physical expression.Numerically,the transient thermoelastic response of the slim strip material under thermal shock is investigated by applying the proposed models.First,the analytical solution in the Laplace domain is obtained by the Laplace transform.Then,the numerical results of the transient responses are obtained by the numerical inverse Laplace transform.Finally,the transient responses of different models are analyzed and compared,and the effects of material parameters are discussed.This work not only opens up new research perspectives on generalized heat conductive and thermoelastic coupling theories,but also is expected to be beneficial for the deeper understanding of the heat wave theory.展开更多
In Earth system modeling,the land surface is coupled with the atmosphere through surface turbulent fluxes.These fluxes are computed using mean meteorological variables between the surface and a reference height in the...In Earth system modeling,the land surface is coupled with the atmosphere through surface turbulent fluxes.These fluxes are computed using mean meteorological variables between the surface and a reference height in the atmosphere.However,the dependence of flux computation on the reference height,which is usually set as the lowest level in the atmosphere in Earth system models,has not received much attention.Based on high-resolution large-eddy simulation(LES)data under unstable conditions,we find the setting of reference height is not trivial within the framework of current surface layer theory.With a reasonable prescription of aerodynamic roughness length(following the setting in LESs),reference heights near the top of the surface layer tend to provide the best estimate of surface fluxes,especially for the momentum flux.Furthermore,this conclusion for the sensible heat flux is insensitive to the ratio of roughness length for momentum versus heat.These results are robust,whether using the classical or revised surface layer theory.They provide a potential guide for setting the proper reference heights for Earth system modeling and can be further tested in the near future using observational data from land–atmosphere feedback observatories.展开更多
Coastal cities hold a special position in the fields of production,living,and ecological research because of their unique wetland resource advantages.However,with global urbanization and rapid economic development,con...Coastal cities hold a special position in the fields of production,living,and ecological research because of their unique wetland resource advantages.However,with global urbanization and rapid economic development,con-flicts among production,living and ecological land are prevalent in coastal cities in the process of maintaining sustainable wetland resources and further developing the social economy.By establishing an SD-PLUS-CCD cou-pling model,this paper analysed the evolution characteristics and driving mechanism of the production-living-ecological space(PLES)and the effects of wetland protection(WLP)on promoting or inhibiting the coordinated development of the PLES in Dongying city during 2005-2060.The results show that(1)from 2005 to 2020,the increase in urban population resulted in a significant transfer of arable land and a reduction of 914 km2 in pro-duction space(PS);(2)from 2020 to 2060,under the WLP scenario,the conversion of wetland ecological space will reduce the PS and living space(LS)by 193.92 km2 and 107.14 km2,respectively,and increase the ecological space(ES)by 327.52 km2;and(3)wetland protection has an inhibitory effect on the coordinated development of PLES in the study area,and the total proportion of noncoordinated areas of PE and living-ecological space will continue to increase during the simulation period.This paper provides a solid theoretical support for the sustain-able management and protection of wetlands in coastal cities and possible PLES conflict patterns and provides a scientific basis for future territorial spatial planning and policy balance analysis.展开更多
The numerical simulation of the fluid flow and the flexible rod(s)interaction is more complicated and has lower efficiency due to the high computational cost.In this paper,a semi-resolved model coupling the computatio...The numerical simulation of the fluid flow and the flexible rod(s)interaction is more complicated and has lower efficiency due to the high computational cost.In this paper,a semi-resolved model coupling the computational fluid dynamics and the flexible rod dynamics is proposed using a two-way domain expansion method.The gov-erning equations of the flexible rod dynamics are discretized and solved by the finite element method,and the fluid flow is simulated by the finite volume method.The interaction between fluids and solid rods is modeled by introducing body force terms into the momentum equations.Referred to the traditional semi-resolved numerical model,an anisotropic Gaussian kernel function method is proposed to specify the interactive forces between flu-ids and solid bodies for non-circle rod cross-sections.A benchmark of the flow passing around a single flexible plate with a rectangular cross-section is used to validate the algorithm.Focused on the engineering applications,a test case of a finite patch of cylinders is implemented to validate the accuracy and efficiency of the coupled model.展开更多
The accuracy of genomic annotation is crucial for subsequent functional investigations;however,computational protocols used in high-throughput annotation of open reading frames(ORFs)can introduce inconsistencies.These...The accuracy of genomic annotation is crucial for subsequent functional investigations;however,computational protocols used in high-throughput annotation of open reading frames(ORFs)can introduce inconsistencies.These inconsistencies,which lead to non-uniform extension or truncation of sequence ends,pose challenges for downstream analyses.Existing strategies to rectify these inconsistencies are time-consuming and labor-intensive,lacking specific approaches.To address this gap,we developed to GC,a tool that integrates genomic annotation with RNA-seq datasets to rectify annotation inconsistencies.Using to GC,we achieved an accuracy of nearly 100%accuracy in correcting inconsistencies in published Phytophthora sojae ORFs.We applied this innovative pipeline to the GPCR-bigrams gene family,which was predicted to have 42 members in the P.sojae genome but lacked experimental validation.By employing to GC,we identified 32 GPCR-bigram ORFs with inconsistencies between previous annotations and to GC-corrected sequences.Notably,among these were 5 genes(GPCR-TKL9,GPCR-TKL15,GPCR-PDE3,GPCR-AC3,and GPCR-AC4)showed substantial inconsistencies.Experimental gene annotation confirmed the effectiveness of to GC,as sequences obtained through cloning matched those annotated by to GC.Importantly,we discovered two novel GPCRs(GPCR-AC3 and GPCR-AC4),which were previously mispredicted as a single gene.CRISPR/Cas9-mediated knockout experiments revealed the involvement of GPCR-AC4 but not GPCR-AC3 in oospore production,further confirming their status as two separate genes.In addition to P.sojae,the reliability of the to GC pipeline in Phytophthora capsici and Pythium ultimum further emphasizes the robustness of this pipeline.Our findings highlight the utility of to GC for reliable gene model correction,facilitating investigations into biological functions and offering potential applications in diverse species analyses.展开更多
To reveal the influence of coupled effects of dry-wet cycling and precompression stress(CEDWCPS)on the damage evolution of limestone with horizontal fissure(LHF),a series of degradation and uniaxial compression tests ...To reveal the influence of coupled effects of dry-wet cycling and precompression stress(CEDWCPS)on the damage evolution of limestone with horizontal fissure(LHF),a series of degradation and uniaxial compression tests were conducted,and a corresponding piecewise damage constitutive model(PDCM)was established.We found that both dry-wet cycling and precompression stress deteriorate the physical properties,alter the microscopic characteristics,and reduce the mechanical properties of the LHF.These degradations are particularly pronounced under the CEDWCPS,although the magnitude of these changes gradually diminishes with the progression of dry-wet cycling.Meanwhile,they also reduce the deformation degree,prolong the micropore compaction stage,shorten the unstable crack propagation stage,lower the frequency and intensity of AE events,decrease the high-amplitude and high-frequency AE signals,enlarge crack scales,and shorten the crack initiation time.Among the changes of these indicators,the dry-wet cycling plays a dominant role.The crack types of LHF under the CEDWCPS(LHFCEDWCPS)are predominantly tensile cracks,supplemented by shear cracks.The failure mode can be defined as tensileshear composite failure.Finally,the established PDCM effectively captures the nonlinear deformation of micropore and the linear deformation of the matrix in LHFCEDWCPS,with all corresponding R^(2) consistently exceeding 0.97.展开更多
Ion-exchange Polymer-Metal Composites(IPMCs)gain huge attentions due to large deformation,rapid electromechanical response,and high energy conversion efficiency.Deflection of IPMC arises from the volumetric swelling e...Ion-exchange Polymer-Metal Composites(IPMCs)gain huge attentions due to large deformation,rapid electromechanical response,and high energy conversion efficiency.Deflection of IPMC arises from the volumetric swelling effect induced by the concentration gradient of hydrated cations between the two electrodes,thus the volume of hydrated cation deter-mines the motion magnitude and direction of IPMC.H ion is one of the most commonly used driving cations for IPMC.However,due to its unique characteristics,particularly the inability to accurately quantify its hydration volume,existing literatures primarily focus on the physical driving models for metallic cations,i.e.,Na+,no driving model for the H ion is reported until now.This paper proposes a novel model of H ion escape from the water's body-centered cubic lattice to count the hydration volume.Number(n)of water molecules carried by the H ion is solved by combining the Lennard-Jones potential energy function with Maxwell's velocity distribution.The specific n value is equivalent to 4.04 for the H ion inside Nafion electrolyte under a 3.0 V DC electric field.Substituting it into the classic Friction Model(proposed by Tadokoro et al.at 2000),actuation behaviors of H ion driven IPMC were therefore achieved through Matlab calculations and Abaqus simulations.The calculated results of dynamic displacement and force highly match to the experimental data form the Nafion IPMC actuator driven by same electric field,showing a highly reliability of the established escape model.展开更多
Graph neural networks(GNN)have shown strong performance in node classification tasks,yet most existing models rely on uniform or shared weight aggregation,lacking flexibility in modeling the varying strength of relati...Graph neural networks(GNN)have shown strong performance in node classification tasks,yet most existing models rely on uniform or shared weight aggregation,lacking flexibility in modeling the varying strength of relationships among nodes.This paper proposes a novel graph coupling convolutional model that introduces an adaptive weighting mechanism to assign distinct importance to neighboring nodes based on their similarity to the central node.Unlike traditional methods,the proposed coupling strategy enhances the interpretability of node interactions while maintaining competitive classification performance.The model operates in the spatial domain,utilizing adjacency list structures for efficient convolution and addressing the limitations of weight sharing through a coupling-based similarity computation.Extensive experiments are conducted on five graph-structured datasets,including Cora,Citeseer,PubMed,Reddit,and BlogCatalog,as well as a custom topology dataset constructed from the Open University Learning Analytics Dataset(OULAD)educational platform.Results demonstrate that the proposed model achieves good classification accuracy,while significantly reducing training time through direct second-order neighbor fusion and data preprocessing.Moreover,analysis of neighborhood order reveals that considering third-order neighbors offers limited accuracy gains but introduces considerable computational overhead,confirming the efficiency of first-and second-order convolution in practical applications.Overall,the proposed graph coupling model offers a lightweight,interpretable,and effective framework for multi-label node classification in complex networks.展开更多
Fluid flow through fractured rock masses is a key process controlling the safety and performance of deep geoengineering systems,shaped by the complex interactions of thermal,hydraulic,mechanical and chemical(THMC)fiel...Fluid flow through fractured rock masses is a key process controlling the safety and performance of deep geoengineering systems,shaped by the complex interactions of thermal,hydraulic,mechanical and chemical(THMC)fields.This paper presents a systematic review of this subject with special emphasis on the multi-physics governing it.First,we elucidate the interdependent mechanisms and governing equations,highlighting the nonlinear,path-dependent,and evolving nature of the relationship between stress and permeability.Next,mainstream modeling approaches,including equivalent continuum,discrete fracture network(DFN),and dual-porosity/dual-permeability methods,are critically evaluated,and a strategy for model selection based on project scale and geological context is proposed accordingly.Moreover,experimental insights from single-fracture and triaxial flow studies are synthesized,revealing how effective stress,shear displacement,and fracture roughness control permeability evolution.In particular,the practical significance of THMC coupling is demonstrated through case studies on nuclear waste disposal,Enhanced Geothermal Systems,and tunneling projects.The reviewfurther explores AI-and machine learning-driven innovations,particularly physics-informed neural networks and hybrid modeling,which address limitations in computational efficiency,data scarcity,and physical consistency.Finally,persistent challenges,including multi-scale coupling,parameter uncertainty,and complex fracture network representation are identified and critically discussed while paying attention to future developments.展开更多
For the feature of complex weapon manufacturing on internet,a coupling model is proposed.By using the model,the correlation between manufacturing cells in an extended manufacturing organization can be evaluated quanti...For the feature of complex weapon manufacturing on internet,a coupling model is proposed.By using the model,the correlation between manufacturing cells in an extended manufacturing organization can be evaluated quantitatively,so an appropriate control plan is determined.A strategy to improve and reduce the coupling relationship of the organization is studied.A correlation matrix of extended tasks is built to analyze the relationship between sub-tasks and manufacturing resources.An optimization method for manufacturing resource configuration is presented based on the coupling model.Finally,a software system for analyzing coupling model about manufacturing organization on internet is developed,and the result shows that the coupling model is effective.展开更多
The shape of strip is calculated by iterative method which combines strip plastic deformation model with rolls elastic deformation model through their calculation results, which can be called results coupling method. ...The shape of strip is calculated by iterative method which combines strip plastic deformation model with rolls elastic deformation model through their calculation results, which can be called results coupling method. Be- cause the shape and rolling force distribution are very sensitive to strip thickness transverse distribution% variation, the iterative course is rather unstable and sometimes convergence cannot be achieved. In addition, the calculating speed of results coupling method is low, which restricts its usable range. To solve the problem, a new model cou- pling method is developed, which takes the force distribution between rolls, rolling force distribution and strip＇s exit transverse displacement distribution as basic unknowns, and integrates strip plastic deformation model and rolls elas- tic deformation model as a unified linear equations through their internal relation, so the iterative calculation between the strip plastic deformation model and rolls elastic deformation model can be avoided. To prove the effectiveness of the model coupling method, two examples are calculated by results coupling method and model coupling method re- spectively. The results of front tension stress, back tension stress, strip^s exit gauge, the force between rolls and rolling force distribution calculated by model coupling method coincide very well with results coupling method. How- ever the calculation course of model coupling method is more steady than results coupling method, and its calculating speed is about ten times as much as the maximal speed of results coupling method, which validates its practicability and reliability.展开更多
In order to build high accuracy integral dynamic models of cold rolling mill system, by analyzing the vibration process of cold rolling, the dynamic model of 4-h mill, including the rolling process model, the mill rol...In order to build high accuracy integral dynamic models of cold rolling mill system, by analyzing the vibration process of cold rolling, the dynamic model of 4-h mill, including the rolling process model, the mill roll stand structure model and the hydraulic servo system model is built. These three models are coupled and linearized, then the multiple input and multiple output （MIMO） linear transfer function model of single stand 4-h cold mill system is obtained. The model with the proposed data proves its validity, meanwhile the effects of different working conditions on the stability of cold rolling mill system have been discussed. Simulation resulsts show that the model accords with former models and has its own advancement. It contributes to the further study and supression of coupling vibraiton.展开更多
This paper, taking Hexi Corridor as an example, analyzes the altemating intimidation and the dynamic evolving relation between urbanization and eco-environment in arid area of West China. We argue that the harmonious ...This paper, taking Hexi Corridor as an example, analyzes the altemating intimidation and the dynamic evolving relation between urbanization and eco-environment in arid area of West China. We argue that the harmonious development system of the urbanization and eco-environment would go through four phases： rudimentary symbiotic phase, harmonious developmental phase, utmost increasing phase and spiral type rising phase. Throughout the four phases, the elements of the system would influence each other, coerce each other, and complete the spiral type rising process from low-grade symbiosis to high-grade harmony together. The study on Hexi Corridor shows that the urbanization level in Hexi Corridor has increased gradually from 1985 to 2003 accompanied with the fluctuations of eco-environment state. The response of eco-environment to urbanization has been evident, but lagged behind the urbanization course. At present, the harmonious development system in Hexi Corridor was in its harmonious developmental phase. However, the coupling degree has increased quickly and approached 90 yet, which is signaling that the system is about to enter the utmost increasing phase, and the ecological crisis will enter the latent period. We have found that the coupling degree can well reflect the interactive coercing and dynamic evolving situation between urbanization and eco-environment in Hexi Corridor. From the temporal change of the coupling degree, it can be concluded that urbanization sometimes needs to pay a certain cost for the damage of the eco-environment in its initial stages, but as the urbanization continues, the state of the eco-environment would be meliorated.展开更多
Two land surface schemes, one the standard Biosphere / Atmosphere Transfer Scheme Version ie (BOZ) and the other B1Z based on B0Z and heterogeneously-treated by' combined approach' , were co 'pled to the m...Two land surface schemes, one the standard Biosphere / Atmosphere Transfer Scheme Version ie (BOZ) and the other B1Z based on B0Z and heterogeneously-treated by' combined approach' , were co 'pled to the meso-scale model MM4, respectively. Through the calculations of equations from the companion paper, parameters representing land surface heterogeneity and suitable for the coupling models were found out. Three cases were simulated for heavy rainfalls during 36 hours, and the sensitivity of short-term weather modeling to the land surface heterogeneity was tested. Through the analysis of the simulations of the three heavy rainfalls, it was demonstrated that BIZ, compared with BOZ, could more realistically reflect the features of the land surface heterogeneity, therefore could more realistically reproduce the circulation and precipitation amount in the heavy rainfall processes of the three cases. This shows that even short-term weather is sensitive to the land surface heterogeneity, which is more obvious with time passing, and whose influence is more pronounced in the lower layer and gradually extends to the middle and upper layer. Through the analysis of these simulations with BlZ, it is suggested that the bulk effect of smaller-scale fluxes (i.e., the momentum, water vapor and sensible heat fluxes) near the s ig nificantly-heterogeneous land surface is to change the larger-scale (i.e., meso-scale) circulation, and then to influence the development of the low-level jets and precipitation. And also, the complexity of the land-atmosphere interaction was shown in these simulations.展开更多
基金Supported by the National Natural Science Foundation of China(Grant Nos.12393780,12032017,12302067)College Education Scientific Research Project of Hebei Province(Grant No.JZX2024006)Hebei Provincial S&T Program(Grant No.21567622 H).
文摘The axle box bearings of high-speed trains often operate in extremely harsh environments,bearing loads from different directions.Long-term operation and frequent changes in working conditions can easily lead to axle box bearing failures.Therefore,it is extremely important to study the mechanism of axle box bearings.Firstly,the medium of thermal deformation establishes a coupling relationship between the system dynamics model and the thermal grid model,and then obtains the thermal force coupling model of the high-speed train axle box bearing.The coupling model is validated from the perspectives of system dynamics response and temperature response,proving its effectiveness in system dynamics response and temperature characteristic response.Comparing the coupling model with the dynamics model,it is found that thermal deformation complicates the dynamic re-sponse.Finally,using the Lundberg-Palmgren(L-P)bearing fatigue calculation method and damage accumu-lation theory,the bearing fatigue life is calculated,and it is found that thermal deformation deteriorates the bearing operating environment,reducing the bearing fatigue life.Finally,by comparing the bearing fatigue life under different working conditions,it is concluded that the faster the vehicle speed,the greater the load,and the smaller the initial radial clearance of the bearing,the fatigue life of the bearing is reduced.The shorter the lifespan.
基金supported by the National Natural Science Foundation of China(Grant Nos.12272411 and 42007259).
文摘Deep rock engineering is affected by coupled thermo-hydro-mechanical(THM)-dynamic fields,necessitating the elucidation of the dynamic mechanical behavior and failure mechanisms.This study utilized a Multi-field Coupled Controlled Split Hopkinson Pressure Bar(MCC-SHPB)system to elucidate the cross-scale dynamic responses of rocks and the boundaries of failure modes under THM coupling.Impact tests were conducted on green sandstone under coupled conditions of temperature(25℃-80℃),confining pressure(0-15 MPa),and seepage water pressure(0-15 MPa).Scanning electron microscopy(SEM)microstructural characterization and COMSOL Multiphysics numerical simulations were conducted,and a dynamic constitutive theoretical framework and failure-prediction methodology were established.We investigated the impact toughness index(I_(t)),dynamic modulus(E_(d)),dynamic triaxial compressive strength(TCS_(d)),fragmentation degree(W),and failure modes of green sandstone under thermo-confining pressure-seepage-impact loading conditions.The key findings reveal that the(I_(t))reflects different energy regulation mechanisms across different confining pressure regimes.Thermal-microcrack interactions dominate at low pressure,and energy absorption prevails at high pressure.A triphasic dynamic modulus model captures stiffness evolution under energy-driven conditions,revealing cross-scale crack nucleation-propagation and fragment reorganization.The TCSd inflection point signifies energy dissipation shifts,causing nonlinear skeleton bearing-capacity degradation.A critical criterion based on the W was established to distinguish between the two failure modes and predict the unstable failure initiation.Numerical simulations were used to elucidate the effects of inertia-dominated crack propagation and stress wave interference,validating the critical criterion and the predictive accuracy of the theoretical model during cross-scale failure.This study provides a theoretical foundation for assessing the dynamic stability of rock masses subjected to multi-field coupling during deep resource exploitation.
基金Project(IMRI23005)supported by Ordos Science and Technology Bureau,ChinaProjects(52174096,52304110)supported by the National Natural Science Foundation of China。
文摘To investigate the effects of water and cyclic loading on dolomite’s mechanical properties during deep mining,mechanical experiments on non-pressure water absorption and cyclic loading were conducted.The findings reveal that the elastic modulus and Poisson ratio of dolomite fluctuate with increasing water content.The mass of water absorption is positively correlated with time and the water absorption stage can be divided into three stages:accelerated,decelerated,and stabilized stages.During this process,the number of pores in dolomite increases,while the pore diameter initially decreases and then fluctuates.Microscopic analysis shows that the proportion of mesopores first increases and then decreases,while micropores exhibit the opposite trend,and the proportion of macropores fluctuates around 0%.A model diagram of structural evolution during water absorption has been developed.Additionally,the softening process of dolomite’s water absorption strength is categorized into three stages:a relatively stable stage,an accelerated softening stage dominated by mesopore water absorption,and a decelerated softening stage characterized by micropore water absorption.A uniaxial damage constitutive model for dolomite under water influence was established based on the Weibull distribution and Mohr-Coulomb strength criterion,and experimental validation indicates its strong applicability.
基金supported by the National Key R&D Program of China(No.2021YFB2011300)the National Natural Science Foundation of China(Nos.52275044,U2233212)。
文摘The Electro–Hydrostatic Actuator(EHA)is applied to drive the control surface in flightcontrol system of more electric aircraft.In EHA,the Oil-Immersed Motor Pump(OMP)serves asthe core as a power assembly.However,the compact integration of the OMP presents challenges inefficiently dissipating internal heat,leading to a performance degradation of the EHA due to ele-vated temperatures.Therefore,accurately modeling and predicting the internal thermal dynamicsof the OMP hold considerable significance for monitoring the operational condition of the EHA.In view of this,a modeling method considering cumulative thermal coupling was hereby proposed.Based on the proposed method,the thermal models of the motor and the pump were established,taking into account heat accumulation and transfer.Taking the leakage oil as the heat couplingpoint between the motor and the pump,the dynamic thermal coupling model of the OMP wasdeveloped,with the thermal characteristics of the oil considered.Additionally,the comparativeexperiments were conducted to illustrate the efficiency of the proposed model.The experimentalresults demonstrate that the proposed dynamic thermal coupling model accurately captured thethermal behavior of OMP,outperforming the static thermal parameter model.Overall,thisadvancement is crucial for effectively monitoring the health of EHA and ensuring flight safety.
基金supported by the Major Research Instrument Development Project of the National Natural Science Foundation of China(82327810)the Foundation of the President of Hebei University(XZJJ202202)the Hebei Province“333 talent project”(A202101058).
文摘Within the prefrontal-cingulate cortex,abnormalities in coupling between neuronal networks can disturb the emotion-cognition interactions,contributing to the development of mental disorders such as depression.Despite this understanding,the neural circuit mechanisms underlying this phenomenon remain elusive.In this study,we present a biophysical computational model encompassing three crucial regions,including the dorsolateral prefrontal cortex,subgenual anterior cingulate cortex,and ventromedial prefrontal cortex.The objective is to investigate the role of coupling relationships within the prefrontal-cingulate cortex networks in balancing emotions and cognitive processes.The numerical results confirm that coupled weights play a crucial role in the balance of emotional cognitive networks.Furthermore,our model predicts the pathogenic mechanism of depression resulting from abnormalities in the subgenual cortex,and network functionality was restored through intervention in the dorsolateral prefrontal cortex.This study utilizes computational modeling techniques to provide an insight explanation for the diagnosis and treatment of depression.
基金Project supported by the Guangdong Basic and Applied Basic Research Foundation of China(No.2023A1515012809)the Natural Science Foundation of Shaanxi Province of China(No.2023-JC-YB-073)the Fundamental Research Funds for the Central Universities of China(No.D5000230066)。
文摘With the miniaturization of devices and the development of modern heating technologies,the generalization of heat conduction and thermoelastic coupling has become crucial,effectively emulating the thermodynamic behavior of materials in ultrashort time scales.Theoretically,generalized heat conductive models are considered in this work.By analogy with mechanical viscoelastic models,this paper further enriches the heat conduction models and gives their one-dimensional physical expression.Numerically,the transient thermoelastic response of the slim strip material under thermal shock is investigated by applying the proposed models.First,the analytical solution in the Laplace domain is obtained by the Laplace transform.Then,the numerical results of the transient responses are obtained by the numerical inverse Laplace transform.Finally,the transient responses of different models are analyzed and compared,and the effects of material parameters are discussed.This work not only opens up new research perspectives on generalized heat conductive and thermoelastic coupling theories,but also is expected to be beneficial for the deeper understanding of the heat wave theory.
基金supported by the Natural Science Foundation of China(Grant Nos.42088101 and 42375163)the Guangdong Major Project of Basic and Applied Basic Research(Grant No.2021B0301030007)the specific research fund of The Innovation Platform for Academicians of Hainan Province(Grant No.YSPTZX202143)。
文摘In Earth system modeling,the land surface is coupled with the atmosphere through surface turbulent fluxes.These fluxes are computed using mean meteorological variables between the surface and a reference height in the atmosphere.However,the dependence of flux computation on the reference height,which is usually set as the lowest level in the atmosphere in Earth system models,has not received much attention.Based on high-resolution large-eddy simulation(LES)data under unstable conditions,we find the setting of reference height is not trivial within the framework of current surface layer theory.With a reasonable prescription of aerodynamic roughness length(following the setting in LESs),reference heights near the top of the surface layer tend to provide the best estimate of surface fluxes,especially for the momentum flux.Furthermore,this conclusion for the sensible heat flux is insensitive to the ratio of roughness length for momentum versus heat.These results are robust,whether using the classical or revised surface layer theory.They provide a potential guide for setting the proper reference heights for Earth system modeling and can be further tested in the near future using observational data from land–atmosphere feedback observatories.
基金supported by the Joint Research program for Eco-logical Conservation and High-quality Development of the Yellow River Basin(Grant No.2022-YRUC-01-0103)Watershed Non-point Source Pollution Prevention and Control Technology and Application Demon-stration Project(Grant No.2021YFC3201505)+3 种基金the National Key Re-search and Development Project(Grant No.2016YFC0502106)the Natural Science Foundation of China(Grant No.41476161)the Spe-cial Project of National Natural Science Foundation of China(Grant No.42442035)the Fundamental Research Funds for the Central Uni-versities.
文摘Coastal cities hold a special position in the fields of production,living,and ecological research because of their unique wetland resource advantages.However,with global urbanization and rapid economic development,con-flicts among production,living and ecological land are prevalent in coastal cities in the process of maintaining sustainable wetland resources and further developing the social economy.By establishing an SD-PLUS-CCD cou-pling model,this paper analysed the evolution characteristics and driving mechanism of the production-living-ecological space(PLES)and the effects of wetland protection(WLP)on promoting or inhibiting the coordinated development of the PLES in Dongying city during 2005-2060.The results show that(1)from 2005 to 2020,the increase in urban population resulted in a significant transfer of arable land and a reduction of 914 km2 in pro-duction space(PS);(2)from 2020 to 2060,under the WLP scenario,the conversion of wetland ecological space will reduce the PS and living space(LS)by 193.92 km2 and 107.14 km2,respectively,and increase the ecological space(ES)by 327.52 km2;and(3)wetland protection has an inhibitory effect on the coordinated development of PLES in the study area,and the total proportion of noncoordinated areas of PE and living-ecological space will continue to increase during the simulation period.This paper provides a solid theoretical support for the sustain-able management and protection of wetlands in coastal cities and possible PLES conflict patterns and provides a scientific basis for future territorial spatial planning and policy balance analysis.
基金supported by Shanghai 2021“Science and Technology Innovation Action Plan”:Social Development Science and Technology Research Project(Grant No.21DZ1202703).
文摘The numerical simulation of the fluid flow and the flexible rod(s)interaction is more complicated and has lower efficiency due to the high computational cost.In this paper,a semi-resolved model coupling the computational fluid dynamics and the flexible rod dynamics is proposed using a two-way domain expansion method.The gov-erning equations of the flexible rod dynamics are discretized and solved by the finite element method,and the fluid flow is simulated by the finite volume method.The interaction between fluids and solid rods is modeled by introducing body force terms into the momentum equations.Referred to the traditional semi-resolved numerical model,an anisotropic Gaussian kernel function method is proposed to specify the interactive forces between flu-ids and solid bodies for non-circle rod cross-sections.A benchmark of the flow passing around a single flexible plate with a rectangular cross-section is used to validate the algorithm.Focused on the engineering applications,a test case of a finite patch of cylinders is implemented to validate the accuracy and efficiency of the coupled model.
基金supported by the grants to Min Qiu and Ming Wang from the National Natural Science Foundation of China(32100160 and 32100044)the grants to Ming Wang from the Jiangsu“Innovative and Entrepreneurial Talent”Program,China(JSSCRC2021510)the grants to Yuanchao Wang from the Chinese Modern Agricultural Industry Technology System(CARS-004-PS14)。
文摘The accuracy of genomic annotation is crucial for subsequent functional investigations;however,computational protocols used in high-throughput annotation of open reading frames(ORFs)can introduce inconsistencies.These inconsistencies,which lead to non-uniform extension or truncation of sequence ends,pose challenges for downstream analyses.Existing strategies to rectify these inconsistencies are time-consuming and labor-intensive,lacking specific approaches.To address this gap,we developed to GC,a tool that integrates genomic annotation with RNA-seq datasets to rectify annotation inconsistencies.Using to GC,we achieved an accuracy of nearly 100%accuracy in correcting inconsistencies in published Phytophthora sojae ORFs.We applied this innovative pipeline to the GPCR-bigrams gene family,which was predicted to have 42 members in the P.sojae genome but lacked experimental validation.By employing to GC,we identified 32 GPCR-bigram ORFs with inconsistencies between previous annotations and to GC-corrected sequences.Notably,among these were 5 genes(GPCR-TKL9,GPCR-TKL15,GPCR-PDE3,GPCR-AC3,and GPCR-AC4)showed substantial inconsistencies.Experimental gene annotation confirmed the effectiveness of to GC,as sequences obtained through cloning matched those annotated by to GC.Importantly,we discovered two novel GPCRs(GPCR-AC3 and GPCR-AC4),which were previously mispredicted as a single gene.CRISPR/Cas9-mediated knockout experiments revealed the involvement of GPCR-AC4 but not GPCR-AC3 in oospore production,further confirming their status as two separate genes.In addition to P.sojae,the reliability of the to GC pipeline in Phytophthora capsici and Pythium ultimum further emphasizes the robustness of this pipeline.Our findings highlight the utility of to GC for reliable gene model correction,facilitating investigations into biological functions and offering potential applications in diverse species analyses.
基金supported by the Yunnan Province Science and Technology Plan Project(No.202403AA080001-4)the Key Research and Development Project of Guangxi,China(No.guikeAB24010144)the National Key Research and Development Project of China(Nos.2021YFB3901402 and 2018YFC1504802)。
文摘To reveal the influence of coupled effects of dry-wet cycling and precompression stress(CEDWCPS)on the damage evolution of limestone with horizontal fissure(LHF),a series of degradation and uniaxial compression tests were conducted,and a corresponding piecewise damage constitutive model(PDCM)was established.We found that both dry-wet cycling and precompression stress deteriorate the physical properties,alter the microscopic characteristics,and reduce the mechanical properties of the LHF.These degradations are particularly pronounced under the CEDWCPS,although the magnitude of these changes gradually diminishes with the progression of dry-wet cycling.Meanwhile,they also reduce the deformation degree,prolong the micropore compaction stage,shorten the unstable crack propagation stage,lower the frequency and intensity of AE events,decrease the high-amplitude and high-frequency AE signals,enlarge crack scales,and shorten the crack initiation time.Among the changes of these indicators,the dry-wet cycling plays a dominant role.The crack types of LHF under the CEDWCPS(LHFCEDWCPS)are predominantly tensile cracks,supplemented by shear cracks.The failure mode can be defined as tensileshear composite failure.Finally,the established PDCM effectively captures the nonlinear deformation of micropore and the linear deformation of the matrix in LHFCEDWCPS,with all corresponding R^(2) consistently exceeding 0.97.
基金National Natural Science Foundations of China(52275295)Central Plains Science and Technology Innovation Leading Talents(234200510026).
文摘Ion-exchange Polymer-Metal Composites(IPMCs)gain huge attentions due to large deformation,rapid electromechanical response,and high energy conversion efficiency.Deflection of IPMC arises from the volumetric swelling effect induced by the concentration gradient of hydrated cations between the two electrodes,thus the volume of hydrated cation deter-mines the motion magnitude and direction of IPMC.H ion is one of the most commonly used driving cations for IPMC.However,due to its unique characteristics,particularly the inability to accurately quantify its hydration volume,existing literatures primarily focus on the physical driving models for metallic cations,i.e.,Na+,no driving model for the H ion is reported until now.This paper proposes a novel model of H ion escape from the water's body-centered cubic lattice to count the hydration volume.Number(n)of water molecules carried by the H ion is solved by combining the Lennard-Jones potential energy function with Maxwell's velocity distribution.The specific n value is equivalent to 4.04 for the H ion inside Nafion electrolyte under a 3.0 V DC electric field.Substituting it into the classic Friction Model(proposed by Tadokoro et al.at 2000),actuation behaviors of H ion driven IPMC were therefore achieved through Matlab calculations and Abaqus simulations.The calculated results of dynamic displacement and force highly match to the experimental data form the Nafion IPMC actuator driven by same electric field,showing a highly reliability of the established escape model.
基金Support by Sichuan Science and Technology Program[2023YFSY0026,2023YFH0004]Guangzhou Huashang University[2024HSZD01,HS2023JYSZH01].
文摘Graph neural networks(GNN)have shown strong performance in node classification tasks,yet most existing models rely on uniform or shared weight aggregation,lacking flexibility in modeling the varying strength of relationships among nodes.This paper proposes a novel graph coupling convolutional model that introduces an adaptive weighting mechanism to assign distinct importance to neighboring nodes based on their similarity to the central node.Unlike traditional methods,the proposed coupling strategy enhances the interpretability of node interactions while maintaining competitive classification performance.The model operates in the spatial domain,utilizing adjacency list structures for efficient convolution and addressing the limitations of weight sharing through a coupling-based similarity computation.Extensive experiments are conducted on five graph-structured datasets,including Cora,Citeseer,PubMed,Reddit,and BlogCatalog,as well as a custom topology dataset constructed from the Open University Learning Analytics Dataset(OULAD)educational platform.Results demonstrate that the proposed model achieves good classification accuracy,while significantly reducing training time through direct second-order neighbor fusion and data preprocessing.Moreover,analysis of neighborhood order reveals that considering third-order neighbors offers limited accuracy gains but introduces considerable computational overhead,confirming the efficiency of first-and second-order convolution in practical applications.Overall,the proposed graph coupling model offers a lightweight,interpretable,and effective framework for multi-label node classification in complex networks.
文摘Fluid flow through fractured rock masses is a key process controlling the safety and performance of deep geoengineering systems,shaped by the complex interactions of thermal,hydraulic,mechanical and chemical(THMC)fields.This paper presents a systematic review of this subject with special emphasis on the multi-physics governing it.First,we elucidate the interdependent mechanisms and governing equations,highlighting the nonlinear,path-dependent,and evolving nature of the relationship between stress and permeability.Next,mainstream modeling approaches,including equivalent continuum,discrete fracture network(DFN),and dual-porosity/dual-permeability methods,are critically evaluated,and a strategy for model selection based on project scale and geological context is proposed accordingly.Moreover,experimental insights from single-fracture and triaxial flow studies are synthesized,revealing how effective stress,shear displacement,and fracture roughness control permeability evolution.In particular,the practical significance of THMC coupling is demonstrated through case studies on nuclear waste disposal,Enhanced Geothermal Systems,and tunneling projects.The reviewfurther explores AI-and machine learning-driven innovations,particularly physics-informed neural networks and hybrid modeling,which address limitations in computational efficiency,data scarcity,and physical consistency.Finally,persistent challenges,including multi-scale coupling,parameter uncertainty,and complex fracture network representation are identified and critically discussed while paying attention to future developments.
基金Supported by the National Defense Industrial Technology Development Program of China~~
文摘For the feature of complex weapon manufacturing on internet,a coupling model is proposed.By using the model,the correlation between manufacturing cells in an extended manufacturing organization can be evaluated quantitatively,so an appropriate control plan is determined.A strategy to improve and reduce the coupling relationship of the organization is studied.A correlation matrix of extended tasks is built to analyze the relationship between sub-tasks and manufacturing resources.An optimization method for manufacturing resource configuration is presented based on the coupling model.Finally,a software system for analyzing coupling model about manufacturing organization on internet is developed,and the result shows that the coupling model is effective.
基金Sponsored by National Science and Technology Support Plan of China (2009AA04Z143)Science and Technology Support Plan of Hebei Province of China (10212101D)Important Natural Science Foundation of Hebei Province of China (E2006001038)
文摘The shape of strip is calculated by iterative method which combines strip plastic deformation model with rolls elastic deformation model through their calculation results, which can be called results coupling method. Be- cause the shape and rolling force distribution are very sensitive to strip thickness transverse distribution% variation, the iterative course is rather unstable and sometimes convergence cannot be achieved. In addition, the calculating speed of results coupling method is low, which restricts its usable range. To solve the problem, a new model cou- pling method is developed, which takes the force distribution between rolls, rolling force distribution and strip＇s exit transverse displacement distribution as basic unknowns, and integrates strip plastic deformation model and rolls elas- tic deformation model as a unified linear equations through their internal relation, so the iterative calculation between the strip plastic deformation model and rolls elastic deformation model can be avoided. To prove the effectiveness of the model coupling method, two examples are calculated by results coupling method and model coupling method re- spectively. The results of front tension stress, back tension stress, strip^s exit gauge, the force between rolls and rolling force distribution calculated by model coupling method coincide very well with results coupling method. How- ever the calculation course of model coupling method is more steady than results coupling method, and its calculating speed is about ten times as much as the maximal speed of results coupling method, which validates its practicability and reliability.
基金Item Sponsored by National Natural Science Foundation of China(60374032)Beijing Municipal Education Commission Key Discipline Control Theory and Control Engineering of China(XK100080537)
文摘In order to build high accuracy integral dynamic models of cold rolling mill system, by analyzing the vibration process of cold rolling, the dynamic model of 4-h mill, including the rolling process model, the mill roll stand structure model and the hydraulic servo system model is built. These three models are coupled and linearized, then the multiple input and multiple output （MIMO） linear transfer function model of single stand 4-h cold mill system is obtained. The model with the proposed data proves its validity, meanwhile the effects of different working conditions on the stability of cold rolling mill system have been discussed. Simulation resulsts show that the model accords with former models and has its own advancement. It contributes to the further study and supression of coupling vibraiton.
基金NationalNaturalScience Emphases Foundation ofChina,No.40335049NationalNaturalScience Foundation ofChina,No.40471059
文摘This paper, taking Hexi Corridor as an example, analyzes the altemating intimidation and the dynamic evolving relation between urbanization and eco-environment in arid area of West China. We argue that the harmonious development system of the urbanization and eco-environment would go through four phases： rudimentary symbiotic phase, harmonious developmental phase, utmost increasing phase and spiral type rising phase. Throughout the four phases, the elements of the system would influence each other, coerce each other, and complete the spiral type rising process from low-grade symbiosis to high-grade harmony together. The study on Hexi Corridor shows that the urbanization level in Hexi Corridor has increased gradually from 1985 to 2003 accompanied with the fluctuations of eco-environment state. The response of eco-environment to urbanization has been evident, but lagged behind the urbanization course. At present, the harmonious development system in Hexi Corridor was in its harmonious developmental phase. However, the coupling degree has increased quickly and approached 90 yet, which is signaling that the system is about to enter the utmost increasing phase, and the ecological crisis will enter the latent period. We have found that the coupling degree can well reflect the interactive coercing and dynamic evolving situation between urbanization and eco-environment in Hexi Corridor. From the temporal change of the coupling degree, it can be concluded that urbanization sometimes needs to pay a certain cost for the damage of the eco-environment in its initial stages, but as the urbanization continues, the state of the eco-environment would be meliorated.
基金the NKBRSF Project! G 1999043400 the CNSF Project! 49735180.
文摘Two land surface schemes, one the standard Biosphere / Atmosphere Transfer Scheme Version ie (BOZ) and the other B1Z based on B0Z and heterogeneously-treated by' combined approach' , were co 'pled to the meso-scale model MM4, respectively. Through the calculations of equations from the companion paper, parameters representing land surface heterogeneity and suitable for the coupling models were found out. Three cases were simulated for heavy rainfalls during 36 hours, and the sensitivity of short-term weather modeling to the land surface heterogeneity was tested. Through the analysis of the simulations of the three heavy rainfalls, it was demonstrated that BIZ, compared with BOZ, could more realistically reflect the features of the land surface heterogeneity, therefore could more realistically reproduce the circulation and precipitation amount in the heavy rainfall processes of the three cases. This shows that even short-term weather is sensitive to the land surface heterogeneity, which is more obvious with time passing, and whose influence is more pronounced in the lower layer and gradually extends to the middle and upper layer. Through the analysis of these simulations with BlZ, it is suggested that the bulk effect of smaller-scale fluxes (i.e., the momentum, water vapor and sensible heat fluxes) near the s ig nificantly-heterogeneous land surface is to change the larger-scale (i.e., meso-scale) circulation, and then to influence the development of the low-level jets and precipitation. And also, the complexity of the land-atmosphere interaction was shown in these simulations.
