Coupled transfer of soil water and heat in closed columns of homogeneous red soil was studied under laboratory conditions. A coupled model was constructed using soil physical theory, empirical equations and experiment...Coupled transfer of soil water and heat in closed columns of homogeneous red soil was studied under laboratory conditions. A coupled model was constructed using soil physical theory, empirical equations and experimental data to predict the coupled transfer. The results show that transport of soil water was affected by temperature gradient, and the largest net water transport was found in the soil column with initial water content of 0.148 m3 m-3. At the same time, temperature changes with the transport of soil water was in a nonlinear shape as heat parameters were function of water content, and the changes of temperature were positively correlated with the net amount of water transported. Numerical modelling results show that the predicted values of temperature distribution were close to the observed values, while the predicted values of water content exhibited limited deviation at both ends of the soil column due to the slight temperature changes at both ends. It was indicated that the model proposed here was applicable.展开更多
In this work, we present numerical modelling of coupled heat and mass transfer within porous materials. Our study focuses on cinder block bricks generally used in building construction. The material is assumed to be p...In this work, we present numerical modelling of coupled heat and mass transfer within porous materials. Our study focuses on cinder block bricks generally used in building construction. The material is assumed to be placed in air. Moisture content and temperature have been chosen as the main transfer drivers and the equations governing these transfer drivers are based on the Luikov model. These equations are solved by an implicit finite difference scheme. A Fortran code associated with the Thomas algorithm was used to solve the equations. The results show that heat and mass transfer depend on the temperature of the air in contact with the material. As this air temperature rises, the temperature within the material increases, and more rapidly at the material surface. Also, thermal conductivity plays a very important role in the thermal conduction of building materials and influences heat and mass transfer in these materials. Materials with higher thermal conductivity diffuse more heat.展开更多
A new facility was presented which can expediently and cheaply measure the transient moisture content profile in multi-layer porous building envelope.Then,a common multi-layer porous building envelope was provided,whi...A new facility was presented which can expediently and cheaply measure the transient moisture content profile in multi-layer porous building envelope.Then,a common multi-layer porous building envelope was provided,which was constructed by cement mortar-red brick-cement plaster.With this kind of building envelope installed in the south wall,a well-controlled air-conditioning room was set up in Changsha,which is one of typical zones of hot and humid climate in China.And experiments were carried out to investigate the temperature and moisture distribution in multi-layer building envelope in summer,both in sunny day and rainy day.The results show that,the temperature and humidity at the interface between the brick and cement mortar are seriously affected by the changes of outdoor temperature and humidity,and the relative humidity at this interface keeps more than 80% for a long-term,which can easily trigger the growth of mould.The temperature and humidity at the interface between the brick and cement plaster change a little,and they are affected by the changes of indoor temperature and humidity.The temperature and humidity at the interface of the wall whose interior surface is affixed with a foam plastic wallpaper are generally higher than those of the wall without wallpaper.The heat transfer and moisture transfer in the envelope are coupled strongly.展开更多
This work presents the results of a set of steady-state numerical simulations about heat transfer in hollow blocks in the presence of coupled natural convection,conduction and radiation.Blocks with two air cells deep ...This work presents the results of a set of steady-state numerical simulations about heat transfer in hollow blocks in the presence of coupled natural convection,conduction and radiation.Blocks with two air cells deep in the vertical direction and three identical cavities in the horizontal direction are considered(typically used for building ceilings).Moreover,their outside horizontal surface is subjected to an incident solar flux and outdoor environment temperature while the inside surface is exposed to typical indoor environment conditions.The flows are considered laminar and two-dimensional over the whole range of parameters examined.The conservation equations are solved by means of a finite difference method based on the control volumes approach,relying on the SIMPLE algorithm for what concerns the coupling of pressure and velocity.The effects of the number of cells in the horizontal direction and the thermal conductivity on the heat transfer through the alveolar structure have been investigated.The results show that the number of holes has a significant impact on the value of the overall heat flux through the considered structure.展开更多
The coupled heat and moisture transfer in a freezing process of wood particle material was mathematically modeled in the paper. The models were interactively solved by using the numerical method(the finite element met...The coupled heat and moisture transfer in a freezing process of wood particle material was mathematically modeled in the paper. The models were interactively solved by using the numerical method(the finite element method and the finite difference method). By matching the theoretical calculation to an experiment, the nonlinear problem was analyzed and the variable thermophysical parameters concerned was evaluated. The analysis procedure and the evaluation of the parameters were presented in detail. The result of the study showed that by using the method as described in the paper, it was possible to determine the variable (with respect to temperature, moisture content and freezing state) thermophysical parameters which were unknown or difficult to measure as long as the governing equations for a considered process were available. The method can significantly reduces the experiment efforts for determining thermophysical parameters which arc very complicated to measure. The determined variable of the effective heat conductivity of wood particle material was given in the paper. The error of the numerical calculation was also estimated by the comparison with a matched experiment.展开更多
A mathematical model for heap bioleaching is developed to analyze heat transfer, oxygen flow, target ion distribution and oxidation leaching rate in the heap. The model equations are solved with Comsol Multiphysics so...A mathematical model for heap bioleaching is developed to analyze heat transfer, oxygen flow, target ion distribution and oxidation leaching rate in the heap. The model equations are solved with Comsol Multiphysics software. Numerical simulation results show the following facts： Concentration of oxygen is relatively high along the boundary of the slope, and low in the center part where leaching rate is slow. Temper- ature is relatively low along the slope and reaches the highest along the bottom region near the slope, with difference being more than 6℃. Concentration of target mental ions is the highest in the bottom region near the slope. Oxidation leaching rate is relatively large in the bottom and slope part with a fast reaction rate, and small in the other part with low oxygen concentration.展开更多
To simulate the concrete shrinkage in varying temperature and moisture environments, a simulate procedure comprising an analytical process and a finite element analysis is proposed based on the coupled partial differe...To simulate the concrete shrinkage in varying temperature and moisture environments, a simulate procedure comprising an analytical process and a finite element analysis is proposed based on the coupled partial differential equations describing heat and moisture transfer in a porous medium. Using the Laplace transformation method and transfer function to simplify and solve the coupled equations in Laplace domain, the moisture and temperature distribution in time domain are obtained by inverse Laplace transformation. The shrinkage deformations of concrete are numerically simulated by the finite element method （FEM） based on the obtained temperature and moisture distribution. This approach avoids the complex eigenvalues, coupling difficulty and low accuracy found in other solving methods, and also effectively calculates the moisture induced shrinkage which is almost impossible using familiar FEM software. The validity of the simulation procedure is verified by Hundt＇s test data. The results reveal that the proposed approach can be considered a reliable and efficient method to simulate the coupling moisture and temperature shrinkage of concrete.展开更多
To achieve efficient and refined thermal environment simulations for single-phase and two-phase flows in aircraft cabins,we propose an integrated analysis method.This approach enables rapid coupled heat transfer calcu...To achieve efficient and refined thermal environment simulations for single-phase and two-phase flows in aircraft cabins,we propose an integrated analysis method.This approach enables rapid coupled heat transfer calculations among single-phase flow,two-phase flow,and solids within a single time step.For single-phase fluid and solid equipment,a fast numerical algorithm for natural convection is developed using a loosely coupled strategy,dividing the single-phase flow into developmental stages for efficient temperature field computation.For two-phase flow and the fuel tank wall,a transient heat transfer model is constructed at the gas-liquid-solid boundary,facilitating fast thermal analysis.These methods are unified for integrated simulation of the cabin’s thermal environment.Validation based on two-dimensional models demonstrates a speedup by a factor of 7.9,while maintaining an average temperature error of less than 1%at two-phase nodes.The method’s robustness is confirmed under various high-temperature boundary conditions.展开更多
Hydrothermal processes are key components in permafrost dynamics; these processes are integral to global wanning. In this study the coupled heat and mass transfer model for （CoupModel） the soil-plant-atmosphere-syst...Hydrothermal processes are key components in permafrost dynamics; these processes are integral to global wanning. In this study the coupled heat and mass transfer model for （CoupModel） the soil-plant-atmosphere-system is applied in high-altitude permafrost regions and to model hydrothermal transfer processes in freeze-thaw cycles. Measured meteorological forcing and soil and vegetation properties are used in the CoupModel for the period from January 1, 2009 to December 31, 2012 at the Tanggula observation site in the Qinghai-Tibet Plateau. A 24-h time step is used in the model simulation. The results show that the simulated soil temperature and water content, as well as the frozen depth compare well with the measured data. The coefficient of determination （R2） is 0.97 for the mean soil temperature and 0.73 for the mean soil water content, respectively. The simulated soil heat flux at a depth of 0-20 cm is also consistent with the monitored data. An analysis is performed on the simulated hydrothermal transfer processes from the deep soil layer to the upper one during the freezing and thawing period. At the beginning of the freezing period, the water in the deep soil layer moves upward to the freezing front and releases heat during the freezing process. When the soil layer is completely frozen, there are no vertical water ex- changes between the soil layers, and the heat exchange process is controlled by the vertical soil temperature gradient. During the thaw- ing period, the downward heat process becomes more active due to increased incoming shortwave radiation at the ground surface. The melt water is quickly dissolved in the soil, and the soil water movement only changes in the shallow soil layer. Subsequently, the model was used to provide an evaluation of the potential response of the active layer to different scenarios of initial water content and climate warming at the Tanggula site. The results reveal that the soil water content and the organic layer provide protection against active layer deepening in summer, so climate warming will cause the permafrost active layer to become deeoer and permafrost degradation.展开更多
The presence of non-gray radiative properties in a reheating furnace’s medium that absorbs,emits,and involves non-gray creates more complex radiative heat transfer problems.Furthermore,it adds difficulty to solving t...The presence of non-gray radiative properties in a reheating furnace’s medium that absorbs,emits,and involves non-gray creates more complex radiative heat transfer problems.Furthermore,it adds difficulty to solving the coupled conduction,convection,and radiation problem,leading to suboptimal efficiency that fails to meet real-time control demands.To overcome this difficulty,comparable gray radiative properties of non-gray media are proposed and estimated by solving an inverse problem.However,the required iteration numbers by using a least-squares method are too many and resulted in a very low inverse efficiency.It is necessary to present an efficient method for the equivalence.The Levenberg-Marquardt algorithm is utilized to solve the inverse problem of coupled heat transfer,and the gray-equivalent radiative characteristics are successfully recovered.It is our intention that the issue of low inverse efficiency,which has been observed when the least-squares method is employed,will be resolved.To enhance the performance of the Levenberg-Marquardt algorithm,a modification is implemented for determining the damping factor.Detailed investigations are also conducted to evaluate its accuracy,stability of convergence,efficiency,and robustness of the algorithm.Subsequently,a comparison is made between the results achieved using each method.展开更多
In this paper,some effort is provided to optimize the geometry of a concrete hollow brick(used in the construction of building roofs)in order to increase the related thermal resistance,thereby reducing energy consumpt...In this paper,some effort is provided to optimize the geometry of a concrete hollow brick(used in the construction of building roofs)in order to increase the related thermal resistance,thereby reducing energy consumption.The analysis is conducted for three different configurations of the hollow concrete bricks.Coupling of conduction,natural convection and thermal radiation phenomena is considered.Moreover,the flows are assumed to be laminar and two-dimensional for the whole range of parameters examined.The conservation equations are solved by a finite difference method based on the control volumes approach and the SIMPLE algorithm for velocity-pressure coupling.The results show that the aspect ratio affects neither the nature of the fluid flow nor the number of convective cells.However,the extension of the circulation cells increases with this parameter.Moreover,the cavities with a large aspect ratio lead to significant reductions in the heat transfer through the hollow block,these reductions reaching approximately 14%.展开更多
The present work deals with the calculation of transition probability between two diabatic potentials coupled by any arbitrary coupling. The method presented in this work is applicable to any type of coupling while fo...The present work deals with the calculation of transition probability between two diabatic potentials coupled by any arbitrary coupling. The method presented in this work is applicable to any type of coupling while for numerical calculations we have assumed the arbitrary coupling as Gaussian coupling. This arbitrary coupling is expressed as a collection of Dirac delta functions and by the use of the transfer matrix technique the transition probability from one diabatic potential to another diabatic potential is calculated. We examine our approach by considering the case of two constant potentials coupled by Gaussian coupling as an arbitrary coupling.展开更多
Studies on coupled transfer of soil moisture and heat have been widely carried out for decades. However, little work has been done on red soils, widespread in southern China. The simultaneous transfer of soil moisture...Studies on coupled transfer of soil moisture and heat have been widely carried out for decades. However, little work has been done on red soils, widespread in southern China. The simultaneous transfer of soil moisture and heat depends on soil physical properties and the climate conditions. Red soil is heavy clay and high content of free iron and aluminum oxide. The climate conditions are characterized by the clear four seasons and the serious seasonal drought. The great annual and diurnal air temperature differences result in significant fluctuation in soil temperature in top layer. The closed and evaporating columns experiments with red soil were conducted to simulate the coupled transfer of soil water and heat under the overlaying and opening fields’ conditions, and to analyze the effects of soil temperature gradient on the water transfer and the effects of initial soil water contents on the transfer of soil water and heat. The closed and evaporating columns were designed similarly with about 18 °C temperatures differences between the top and bottom boundary, except of the upper end closed or exposed to the air, respectively. Results showed that in the closed column, water moved towards the cold end driven by temperature gradient, while the transported water decreased with the increasing initial soil water content until the initial soil water content reached to field capacity equivalent, when almost no changes for the soil moisture profile. In the evaporating column, the net transport of soil water was simultaneously driven by evaporation and temperature gradients, and the drier soil was more influenced by temperature gradient than by evapo- ration. In drier soil, it took a longer time for the temperature to reach equilibrium, because of more net amount of transported water.展开更多
By summing geophone and hydrophone data with opposite polarity responses to water layer reverberation,the ocean bottom cable dual-sensor acquisition technique can effectively eliminate reverberation,broaden the freque...By summing geophone and hydrophone data with opposite polarity responses to water layer reverberation,the ocean bottom cable dual-sensor acquisition technique can effectively eliminate reverberation,broaden the frequency bandwidth,and improve both the resolution and fidelity of the seismic data.It is thus widely used in industry.However,it is difficult to ensure good coupling of the geophones with the seabed because of the impact of ocean flow,seafloor topography,and field operations;therefore,geophone data are seriously affected by the transfer function of the geophone-seabed coupling system.As a result,geophone data frequently have low signal-to-noise ratios（S/N）,which causes large differences in amplitude,frequency,and phases between geophone and hydrophone data that severely affect dual-sensor summation.In contrast,the hydrophone detects changes in brine pressure and has no coupling issues with the seabed;thus,hydrophone data always have good S/N.First,in this paper,the mathematical expression of the transfer function between geophone and seabed is presented.Second,the transfer function of the geophone-seabed is estimated using hydrophone data as reference traces,and finally,the coupling correction based on the estimated transfer function is implemented.Using this processing,the amplitude and phase differences between geophone and hydrophone data are removed,and the S/N of the geophone data are improved.Synthetic and real data examples then show that our method is feasible and practical.展开更多
Simulation models of heat and water transport have not been rigorously tested for the red soils of southern China. Based on the theory of nonisothermal water-heat coupled transfer, a simulation model, programmed in Vi...Simulation models of heat and water transport have not been rigorously tested for the red soils of southern China. Based on the theory of nonisothermal water-heat coupled transfer, a simulation model, programmed in Visual Basic 6.0, was developed to predict the coupled transfer of water and heat in hilly red soil. A series of soil column experiments for soil water and heat transfer, including soil columns with closed and evaporating top ends, were used to test the simulation model. Results showed that in the closed columns, the temporal and spatial distribution of moisture and heat could be very well predicted by the model, while in the evaporating columns, the simulated soil water contents were somewhat different from the observed ones. In the heat flow equation by Taylor and Lary (1964), the effect of soil water evaporation on the heat flow is not involved, which may be the main reason for the differences between simulated and observed results. The predicted temperatures were not in agreement with the observed one with thermal conductivities calculated by de Vries and Wierenga equations, so that it is suggested that Kh, soil heat conductivity, be multiplied by 8.0 for the first 6.5 h and by 1.2 later on. Sensitivity analysis of soil water and heat coefficients showed that the saturated hydraulic conductivity, KS, and the water diffusivity, D(θ), had great effects on soil water transport; the variation of soil porosity led to the difference of soil thermal properties, and accordingly changed temperature redistribution, which would affect water redistribution.展开更多
Considering the coupled heat transfer effect induced by parallel cross-river road tunnels, the long-term soil temperature variations of shallow sections of cross-river tunnels under the river beach are predicted using...Considering the coupled heat transfer effect induced by parallel cross-river road tunnels, the long-term soil temperature variations of shallow sections of cross-river tunnels under the river beach are predicted using the finite difference method for numerical simulation. The boundary conditions and the initial values are determined by in situ observations and numerical iterations.The simulation results indicate that the ultimate calculated steady heat transfer time is 68 years, and most of the heat transfer is completed in 20 years.The initial constant temperature soil surrounding the tunnels is transformed to an annually variable one.An obvious temperature-varying region of the surrounding soil is discovered within 5 m from the tunnel exterior, as well as within the entire range of soil between the two tunnels.The maximum temperature increase value reaches 7.14 ℃ and the maximum peak-to-valley value of annual temperature increase reaches 10 ℃.The temperature variation of soils surrounding tunnels below 10 m is completely controlled by the heat transfer from the tunnels.The coupled heat transfer effect is confirmed because the ultimate steady temperature of soil between the two tunnels is higher than the ones along other positions.Moreover, the regression model comprising a series of univariate functions is proposed for the annual soil temperature fluctuation estimation for the locations varied distances around the tunnel.This investigation is beneficial to gain an insight into the long-term variation tendencies of local engineering geological conditions of the river beach above shallow sections of the cross-river road tunnels.展开更多
Lightning strike is a complicated process involving multi-field coupling.In order to investigate the thermal damage mechanism of carbon fiber reinforced composites subject to lightning swept stroke,a complete numerica...Lightning strike is a complicated process involving multi-field coupling.In order to investigate the thermal damage mechanism of carbon fiber reinforced composites subject to lightning swept stroke,a complete numerical method is presented.Numerical model of lightning discharge is established based on Magneto Hydro Dynamics(MHD)and calculated by FLUENT secondary development technology.Considering aerodynamic flow effect,channel formation and evolution process during lightning discharge is analyzed for lightning current waveform A.Thermal-electric Coupling model is presented according to Radial Basis Function(RBF)interpolation theory,which is implemented by compiling program to make lightning current and heat energy inject into composite laminate.Consequently,damage mechanism of composite laminate under lightning swept stroke is studied based on the coupled numerical model and element deletion method.Ablation damage morphology of composite laminate is analyzed to understand plasma expansion and reattachment in arc root.The results show that aerodynamic flow makes the lightning channel move fast and composite laminate is deteriorated due to thermal damage.展开更多
The divergent behavior of C-H bond oxidations of aliphatic substrates compared to those of aromatic substrates shown in Gupta’s experiment was mechanistically studied herein by means of density functional theory calc...The divergent behavior of C-H bond oxidations of aliphatic substrates compared to those of aromatic substrates shown in Gupta’s experiment was mechanistically studied herein by means of density functional theory calculations.Our calculations reveal that such difference is caused by different reaction mechanisms between two kinds of substrates(the aliphatic cyclohexane,2,3-dimethylbutane and the aromatic toluene,ethylbenzene and cumene).For the aliphatic substrates,C-H oxidation by the oxidant Fe^(V)(O)(TAML)is a hydrogen atom transfer process;whereas for the aromatic substrates,C-H oxidation is a proton-coupled electron transfer(PCET)process with a proton transfer character on the transition state,that is,a proton-coupled electron transfer process holding a proton transfer-like transition state(PCET(PT)).This difference is caused by the strongπ-πinteractions between the tetra-anionic TAML ring and the phenyl ring of the aromatic substrates,which has a“pull”effect to make the electron transfer from substrates to the Fe=O moiety inefficient.展开更多
In this paper, the development status of casting numerical simulation technology is introduced. In additional, mathematical model, solution method, initial condition, boundary condition and defect predicting scheme of...In this paper, the development status of casting numerical simulation technology is introduced. In additional, mathematical model, solution method, initial condition, boundary condition and defect predicting scheme of foundry process are also analyzed, which include the mold filling process, solidification process and the process coupling fluid flow with heat transfer. Finally, a practical casting is taken out to show how to predict defects and optimize foundry process with numerical simulation technology.展开更多
To reduce the time of getting an ideal elliptical heat used in power station through repairing and testing a die repeatedly according to experience,finite element software Deform-3D was used to research the simulation...To reduce the time of getting an ideal elliptical heat used in power station through repairing and testing a die repeatedly according to experience,finite element software Deform-3D was used to research the simulation of deformation-heat transfer coupling in hot forming process of elliptical head with the size of Φ1200 mm ×100 mm. The variations of stress,stain,temperature,thickness and strain rate in forming process were gotten,and the forming quality was evaluated from roundness,thinning rate and thermal contraction. The results show that the maximum thinning rate of the elliptical head is 7. 31% ,it is close to the orthographic place; and the inner diam- eter obtained from simulation is 1200. 6 - 1202. 977 mm,it is in the range of inner diameter tolerance required; all the data fit well with the practical dimension data of processing head.展开更多
基金Project (No. 49671050) supported by the National Natural Science Foundation of China.
文摘Coupled transfer of soil water and heat in closed columns of homogeneous red soil was studied under laboratory conditions. A coupled model was constructed using soil physical theory, empirical equations and experimental data to predict the coupled transfer. The results show that transport of soil water was affected by temperature gradient, and the largest net water transport was found in the soil column with initial water content of 0.148 m3 m-3. At the same time, temperature changes with the transport of soil water was in a nonlinear shape as heat parameters were function of water content, and the changes of temperature were positively correlated with the net amount of water transported. Numerical modelling results show that the predicted values of temperature distribution were close to the observed values, while the predicted values of water content exhibited limited deviation at both ends of the soil column due to the slight temperature changes at both ends. It was indicated that the model proposed here was applicable.
文摘In this work, we present numerical modelling of coupled heat and mass transfer within porous materials. Our study focuses on cinder block bricks generally used in building construction. The material is assumed to be placed in air. Moisture content and temperature have been chosen as the main transfer drivers and the equations governing these transfer drivers are based on the Luikov model. These equations are solved by an implicit finite difference scheme. A Fortran code associated with the Thomas algorithm was used to solve the equations. The results show that heat and mass transfer depend on the temperature of the air in contact with the material. As this air temperature rises, the temperature within the material increases, and more rapidly at the material surface. Also, thermal conductivity plays a very important role in the thermal conduction of building materials and influences heat and mass transfer in these materials. Materials with higher thermal conductivity diffuse more heat.
基金Project(51078127) supported by the National Natural Science Foundation of China
文摘A new facility was presented which can expediently and cheaply measure the transient moisture content profile in multi-layer porous building envelope.Then,a common multi-layer porous building envelope was provided,which was constructed by cement mortar-red brick-cement plaster.With this kind of building envelope installed in the south wall,a well-controlled air-conditioning room was set up in Changsha,which is one of typical zones of hot and humid climate in China.And experiments were carried out to investigate the temperature and moisture distribution in multi-layer building envelope in summer,both in sunny day and rainy day.The results show that,the temperature and humidity at the interface between the brick and cement mortar are seriously affected by the changes of outdoor temperature and humidity,and the relative humidity at this interface keeps more than 80% for a long-term,which can easily trigger the growth of mould.The temperature and humidity at the interface between the brick and cement plaster change a little,and they are affected by the changes of indoor temperature and humidity.The temperature and humidity at the interface of the wall whose interior surface is affixed with a foam plastic wallpaper are generally higher than those of the wall without wallpaper.The heat transfer and moisture transfer in the envelope are coupled strongly.
文摘This work presents the results of a set of steady-state numerical simulations about heat transfer in hollow blocks in the presence of coupled natural convection,conduction and radiation.Blocks with two air cells deep in the vertical direction and three identical cavities in the horizontal direction are considered(typically used for building ceilings).Moreover,their outside horizontal surface is subjected to an incident solar flux and outdoor environment temperature while the inside surface is exposed to typical indoor environment conditions.The flows are considered laminar and two-dimensional over the whole range of parameters examined.The conservation equations are solved by means of a finite difference method based on the control volumes approach,relying on the SIMPLE algorithm for what concerns the coupling of pressure and velocity.The effects of the number of cells in the horizontal direction and the thermal conductivity on the heat transfer through the alveolar structure have been investigated.The results show that the number of holes has a significant impact on the value of the overall heat flux through the considered structure.
文摘The coupled heat and moisture transfer in a freezing process of wood particle material was mathematically modeled in the paper. The models were interactively solved by using the numerical method(the finite element method and the finite difference method). By matching the theoretical calculation to an experiment, the nonlinear problem was analyzed and the variable thermophysical parameters concerned was evaluated. The analysis procedure and the evaluation of the parameters were presented in detail. The result of the study showed that by using the method as described in the paper, it was possible to determine the variable (with respect to temperature, moisture content and freezing state) thermophysical parameters which were unknown or difficult to measure as long as the governing equations for a considered process were available. The method can significantly reduces the experiment efforts for determining thermophysical parameters which arc very complicated to measure. The determined variable of the effective heat conductivity of wood particle material was given in the paper. The error of the numerical calculation was also estimated by the comparison with a matched experiment.
基金Project supported by the National Natural Science Foundation of China (Nos. 50934002 and 50774011)the Postdoctoral Science Foundation of China (No. 20090450014)the DoctoralNatural Science Foundation of China (No. 20070008038)
文摘A mathematical model for heap bioleaching is developed to analyze heat transfer, oxygen flow, target ion distribution and oxidation leaching rate in the heap. The model equations are solved with Comsol Multiphysics software. Numerical simulation results show the following facts： Concentration of oxygen is relatively high along the boundary of the slope, and low in the center part where leaching rate is slow. Temper- ature is relatively low along the slope and reaches the highest along the bottom region near the slope, with difference being more than 6℃. Concentration of target mental ions is the highest in the bottom region near the slope. Oxidation leaching rate is relatively large in the bottom and slope part with a fast reaction rate, and small in the other part with low oxygen concentration.
基金The National Natural Science Foundation of China(No50539040)the Trans-Century Training Programme Foundation forthe Talents by the State Education Commission (NoNCET-05-0473)
文摘To simulate the concrete shrinkage in varying temperature and moisture environments, a simulate procedure comprising an analytical process and a finite element analysis is proposed based on the coupled partial differential equations describing heat and moisture transfer in a porous medium. Using the Laplace transformation method and transfer function to simplify and solve the coupled equations in Laplace domain, the moisture and temperature distribution in time domain are obtained by inverse Laplace transformation. The shrinkage deformations of concrete are numerically simulated by the finite element method （FEM） based on the obtained temperature and moisture distribution. This approach avoids the complex eigenvalues, coupling difficulty and low accuracy found in other solving methods, and also effectively calculates the moisture induced shrinkage which is almost impossible using familiar FEM software. The validity of the simulation procedure is verified by Hundt＇s test data. The results reveal that the proposed approach can be considered a reliable and efficient method to simulate the coupling moisture and temperature shrinkage of concrete.
文摘To achieve efficient and refined thermal environment simulations for single-phase and two-phase flows in aircraft cabins,we propose an integrated analysis method.This approach enables rapid coupled heat transfer calculations among single-phase flow,two-phase flow,and solids within a single time step.For single-phase fluid and solid equipment,a fast numerical algorithm for natural convection is developed using a loosely coupled strategy,dividing the single-phase flow into developmental stages for efficient temperature field computation.For two-phase flow and the fuel tank wall,a transient heat transfer model is constructed at the gas-liquid-solid boundary,facilitating fast thermal analysis.These methods are unified for integrated simulation of the cabin’s thermal environment.Validation based on two-dimensional models demonstrates a speedup by a factor of 7.9,while maintaining an average temperature error of less than 1%at two-phase nodes.The method’s robustness is confirmed under various high-temperature boundary conditions.
基金National Major Scientific Project of China(No.2013CBA01803)Science Fund for Creative Research Groups of National Natural Science Foundation of China(No.41121001)+1 种基金National Natural Science Foundation of China(No.41271081)Foundation of One Hundred Person Project of Chinese Academy of Sciences(No.51Y251571)
文摘Hydrothermal processes are key components in permafrost dynamics; these processes are integral to global wanning. In this study the coupled heat and mass transfer model for （CoupModel） the soil-plant-atmosphere-system is applied in high-altitude permafrost regions and to model hydrothermal transfer processes in freeze-thaw cycles. Measured meteorological forcing and soil and vegetation properties are used in the CoupModel for the period from January 1, 2009 to December 31, 2012 at the Tanggula observation site in the Qinghai-Tibet Plateau. A 24-h time step is used in the model simulation. The results show that the simulated soil temperature and water content, as well as the frozen depth compare well with the measured data. The coefficient of determination （R2） is 0.97 for the mean soil temperature and 0.73 for the mean soil water content, respectively. The simulated soil heat flux at a depth of 0-20 cm is also consistent with the monitored data. An analysis is performed on the simulated hydrothermal transfer processes from the deep soil layer to the upper one during the freezing and thawing period. At the beginning of the freezing period, the water in the deep soil layer moves upward to the freezing front and releases heat during the freezing process. When the soil layer is completely frozen, there are no vertical water ex- changes between the soil layers, and the heat exchange process is controlled by the vertical soil temperature gradient. During the thaw- ing period, the downward heat process becomes more active due to increased incoming shortwave radiation at the ground surface. The melt water is quickly dissolved in the soil, and the soil water movement only changes in the shallow soil layer. Subsequently, the model was used to provide an evaluation of the potential response of the active layer to different scenarios of initial water content and climate warming at the Tanggula site. The results reveal that the soil water content and the organic layer provide protection against active layer deepening in summer, so climate warming will cause the permafrost active layer to become deeoer and permafrost degradation.
基金supported by the Na⁃tional Natural Science Foundation of China(No.12172078)the Fundamental Research Funds for the Central Univer⁃sities(No.DUT24MS007).
文摘The presence of non-gray radiative properties in a reheating furnace’s medium that absorbs,emits,and involves non-gray creates more complex radiative heat transfer problems.Furthermore,it adds difficulty to solving the coupled conduction,convection,and radiation problem,leading to suboptimal efficiency that fails to meet real-time control demands.To overcome this difficulty,comparable gray radiative properties of non-gray media are proposed and estimated by solving an inverse problem.However,the required iteration numbers by using a least-squares method are too many and resulted in a very low inverse efficiency.It is necessary to present an efficient method for the equivalence.The Levenberg-Marquardt algorithm is utilized to solve the inverse problem of coupled heat transfer,and the gray-equivalent radiative characteristics are successfully recovered.It is our intention that the issue of low inverse efficiency,which has been observed when the least-squares method is employed,will be resolved.To enhance the performance of the Levenberg-Marquardt algorithm,a modification is implemented for determining the damping factor.Detailed investigations are also conducted to evaluate its accuracy,stability of convergence,efficiency,and robustness of the algorithm.Subsequently,a comparison is made between the results achieved using each method.
文摘In this paper,some effort is provided to optimize the geometry of a concrete hollow brick(used in the construction of building roofs)in order to increase the related thermal resistance,thereby reducing energy consumption.The analysis is conducted for three different configurations of the hollow concrete bricks.Coupling of conduction,natural convection and thermal radiation phenomena is considered.Moreover,the flows are assumed to be laminar and two-dimensional for the whole range of parameters examined.The conservation equations are solved by a finite difference method based on the control volumes approach and the SIMPLE algorithm for velocity-pressure coupling.The results show that the aspect ratio affects neither the nature of the fluid flow nor the number of convective cells.However,the extension of the circulation cells increases with this parameter.Moreover,the cavities with a large aspect ratio lead to significant reductions in the heat transfer through the hollow block,these reductions reaching approximately 14%.
文摘The present work deals with the calculation of transition probability between two diabatic potentials coupled by any arbitrary coupling. The method presented in this work is applicable to any type of coupling while for numerical calculations we have assumed the arbitrary coupling as Gaussian coupling. This arbitrary coupling is expressed as a collection of Dirac delta functions and by the use of the transfer matrix technique the transition probability from one diabatic potential to another diabatic potential is calculated. We examine our approach by considering the case of two constant potentials coupled by Gaussian coupling as an arbitrary coupling.
基金Project supported by the National Natural Science Foundation ofChina (No. 40171047) and the Doctoral Foundation of NationalEducation Ministry China
文摘Studies on coupled transfer of soil moisture and heat have been widely carried out for decades. However, little work has been done on red soils, widespread in southern China. The simultaneous transfer of soil moisture and heat depends on soil physical properties and the climate conditions. Red soil is heavy clay and high content of free iron and aluminum oxide. The climate conditions are characterized by the clear four seasons and the serious seasonal drought. The great annual and diurnal air temperature differences result in significant fluctuation in soil temperature in top layer. The closed and evaporating columns experiments with red soil were conducted to simulate the coupled transfer of soil water and heat under the overlaying and opening fields’ conditions, and to analyze the effects of soil temperature gradient on the water transfer and the effects of initial soil water contents on the transfer of soil water and heat. The closed and evaporating columns were designed similarly with about 18 °C temperatures differences between the top and bottom boundary, except of the upper end closed or exposed to the air, respectively. Results showed that in the closed column, water moved towards the cold end driven by temperature gradient, while the transported water decreased with the increasing initial soil water content until the initial soil water content reached to field capacity equivalent, when almost no changes for the soil moisture profile. In the evaporating column, the net transport of soil water was simultaneously driven by evaporation and temperature gradients, and the drier soil was more influenced by temperature gradient than by evapo- ration. In drier soil, it took a longer time for the temperature to reach equilibrium, because of more net amount of transported water.
文摘By summing geophone and hydrophone data with opposite polarity responses to water layer reverberation,the ocean bottom cable dual-sensor acquisition technique can effectively eliminate reverberation,broaden the frequency bandwidth,and improve both the resolution and fidelity of the seismic data.It is thus widely used in industry.However,it is difficult to ensure good coupling of the geophones with the seabed because of the impact of ocean flow,seafloor topography,and field operations;therefore,geophone data are seriously affected by the transfer function of the geophone-seabed coupling system.As a result,geophone data frequently have low signal-to-noise ratios（S/N）,which causes large differences in amplitude,frequency,and phases between geophone and hydrophone data that severely affect dual-sensor summation.In contrast,the hydrophone detects changes in brine pressure and has no coupling issues with the seabed;thus,hydrophone data always have good S/N.First,in this paper,the mathematical expression of the transfer function between geophone and seabed is presented.Second,the transfer function of the geophone-seabed is estimated using hydrophone data as reference traces,and finally,the coupling correction based on the estimated transfer function is implemented.Using this processing,the amplitude and phase differences between geophone and hydrophone data are removed,and the S/N of the geophone data are improved.Synthetic and real data examples then show that our method is feasible and practical.
基金Project supported by the National Natural Science Foundation ofChina (No. 40171047) and the Doctoral Foundation of NationalEducation Ministry China
文摘Simulation models of heat and water transport have not been rigorously tested for the red soils of southern China. Based on the theory of nonisothermal water-heat coupled transfer, a simulation model, programmed in Visual Basic 6.0, was developed to predict the coupled transfer of water and heat in hilly red soil. A series of soil column experiments for soil water and heat transfer, including soil columns with closed and evaporating top ends, were used to test the simulation model. Results showed that in the closed columns, the temporal and spatial distribution of moisture and heat could be very well predicted by the model, while in the evaporating columns, the simulated soil water contents were somewhat different from the observed ones. In the heat flow equation by Taylor and Lary (1964), the effect of soil water evaporation on the heat flow is not involved, which may be the main reason for the differences between simulated and observed results. The predicted temperatures were not in agreement with the observed one with thermal conductivities calculated by de Vries and Wierenga equations, so that it is suggested that Kh, soil heat conductivity, be multiplied by 8.0 for the first 6.5 h and by 1.2 later on. Sensitivity analysis of soil water and heat coefficients showed that the saturated hydraulic conductivity, KS, and the water diffusivity, D(θ), had great effects on soil water transport; the variation of soil porosity led to the difference of soil thermal properties, and accordingly changed temperature redistribution, which would affect water redistribution.
基金The National Natural Science Foundation of China(No.40902076)the Natural Science Foundation of Jiangsu Province(No.BK20141224)
文摘Considering the coupled heat transfer effect induced by parallel cross-river road tunnels, the long-term soil temperature variations of shallow sections of cross-river tunnels under the river beach are predicted using the finite difference method for numerical simulation. The boundary conditions and the initial values are determined by in situ observations and numerical iterations.The simulation results indicate that the ultimate calculated steady heat transfer time is 68 years, and most of the heat transfer is completed in 20 years.The initial constant temperature soil surrounding the tunnels is transformed to an annually variable one.An obvious temperature-varying region of the surrounding soil is discovered within 5 m from the tunnel exterior, as well as within the entire range of soil between the two tunnels.The maximum temperature increase value reaches 7.14 ℃ and the maximum peak-to-valley value of annual temperature increase reaches 10 ℃.The temperature variation of soils surrounding tunnels below 10 m is completely controlled by the heat transfer from the tunnels.The coupled heat transfer effect is confirmed because the ultimate steady temperature of soil between the two tunnels is higher than the ones along other positions.Moreover, the regression model comprising a series of univariate functions is proposed for the annual soil temperature fluctuation estimation for the locations varied distances around the tunnel.This investigation is beneficial to gain an insight into the long-term variation tendencies of local engineering geological conditions of the river beach above shallow sections of the cross-river road tunnels.
基金supported by the National Natural Science Foundation of China(No.51875463)the Natural Science Basic Research Plain in Shaanxi Province of China(No.2018JM1001)the Research Funds of Shanxi Key Laboratory of Electromagnetic Protection Material and Technology(No.33ZD1807KF001C)。
文摘Lightning strike is a complicated process involving multi-field coupling.In order to investigate the thermal damage mechanism of carbon fiber reinforced composites subject to lightning swept stroke,a complete numerical method is presented.Numerical model of lightning discharge is established based on Magneto Hydro Dynamics(MHD)and calculated by FLUENT secondary development technology.Considering aerodynamic flow effect,channel formation and evolution process during lightning discharge is analyzed for lightning current waveform A.Thermal-electric Coupling model is presented according to Radial Basis Function(RBF)interpolation theory,which is implemented by compiling program to make lightning current and heat energy inject into composite laminate.Consequently,damage mechanism of composite laminate under lightning swept stroke is studied based on the coupled numerical model and element deletion method.Ablation damage morphology of composite laminate is analyzed to understand plasma expansion and reattachment in arc root.The results show that aerodynamic flow makes the lightning channel move fast and composite laminate is deteriorated due to thermal damage.
基金supported by the National Natural Science Foundation of China(No.21806018 and No.21873052)the Fundamental Research Funds for the Central Universities(DUT20RC(4)002)+1 种基金Scientific Research Grant of Ningbo University(No.215-432000282)Ningbo Top Talent Project(No.215-432094250)。
文摘The divergent behavior of C-H bond oxidations of aliphatic substrates compared to those of aromatic substrates shown in Gupta’s experiment was mechanistically studied herein by means of density functional theory calculations.Our calculations reveal that such difference is caused by different reaction mechanisms between two kinds of substrates(the aliphatic cyclohexane,2,3-dimethylbutane and the aromatic toluene,ethylbenzene and cumene).For the aliphatic substrates,C-H oxidation by the oxidant Fe^(V)(O)(TAML)is a hydrogen atom transfer process;whereas for the aromatic substrates,C-H oxidation is a proton-coupled electron transfer(PCET)process with a proton transfer character on the transition state,that is,a proton-coupled electron transfer process holding a proton transfer-like transition state(PCET(PT)).This difference is caused by the strongπ-πinteractions between the tetra-anionic TAML ring and the phenyl ring of the aromatic substrates,which has a“pull”effect to make the electron transfer from substrates to the Fe=O moiety inefficient.
文摘In this paper, the development status of casting numerical simulation technology is introduced. In additional, mathematical model, solution method, initial condition, boundary condition and defect predicting scheme of foundry process are also analyzed, which include the mold filling process, solidification process and the process coupling fluid flow with heat transfer. Finally, a practical casting is taken out to show how to predict defects and optimize foundry process with numerical simulation technology.
基金Sponsored by the Heilongjiang Provincial Public Relation Project (Grant No.GC06A515)
文摘To reduce the time of getting an ideal elliptical heat used in power station through repairing and testing a die repeatedly according to experience,finite element software Deform-3D was used to research the simulation of deformation-heat transfer coupling in hot forming process of elliptical head with the size of Φ1200 mm ×100 mm. The variations of stress,stain,temperature,thickness and strain rate in forming process were gotten,and the forming quality was evaluated from roundness,thinning rate and thermal contraction. The results show that the maximum thinning rate of the elliptical head is 7. 31% ,it is close to the orthographic place; and the inner diam- eter obtained from simulation is 1200. 6 - 1202. 977 mm,it is in the range of inner diameter tolerance required; all the data fit well with the practical dimension data of processing head.
