Restructuring of power market not only introduces competition but also brings complexity which increases overloading of Transmission Lines(TL).To obviate this complexity,this paper aims to mitigate the overloading and...Restructuring of power market not only introduces competition but also brings complexity which increases overloading of Transmission Lines(TL).To obviate this complexity,this paper aims to mitigate the overloading and estimate the optimal location of Static Synchronous Compensator(STATCOM) by reducing congestion for a deregulated power system.The proposed method is based on the use of Locational Marginal Price(LMP) difference technique and congestion cost.LMPs are obtained as a by-product of Optimal Power Flow(OPF),whereas Congestion Cost(CC) is a function of difference in LMP and power flows.The effiectiveness of this approach is demonstrated by reducing the CC and solution space which can identify the TLs more suitable for placement of STATCOM.Importantly,total real power loss,reactive power loss and total CC are the three main objective functions in this optimization process.The process is implemented by developing an IEEE-69 bus test system which verifies and validates the effectiveness of proposed optimization technique.Additionally,a comparative analysis is enumerated by implementing two optimization techniques:Flower Pollination Algorithm(FPA) and Particle Swarm Optimization(PSO).The comparative analysis is sufficient to demonstrate the superiority of FPA technique over PSO technique in estimating an optimal placement of a STATCOM.The results from the load-flow analysis illustrate the reduction in CC,total real and reactive power loss using FPA technique compared to PSO technique.Overall,satisfactory results are obtained without using complex calculations which verify the effectiveness of optimization techniques.展开更多
China implemented its Action Plan of Air Pollution Prevention and Control(APAPPC)in 2013 as a major step in national air-quality management.This study treated the APAPPC as a quasi-experiment,drawing on the Grossman a...China implemented its Action Plan of Air Pollution Prevention and Control(APAPPC)in 2013 as a major step in national air-quality management.This study treated the APAPPC as a quasi-experiment,drawing on the Grossman and Cropper models,to examine how air pollution affected individual health capital and medical service demand.Using panel data from the China Health and Retirement Longitudinal Study for 2011,2013,2015,and 2018,the analysis applied a Heckman two-stage model and difference-in-differences estimation to identify the policy's effects on medical expenditure.The results showed that the APAPPC significantly reduced annual health spending,with stronger effects among women,older adults,and rural residents.The mechanism analysis indicated that the reduction in respiratory diseases played a key role.This study provides evidence that supports further airpollution control in China and offers useful insights for other developing countries.展开更多
Hybrid renewable energy systems(HRES)offer cost-effectiveness,low-emission power solutions,and reduced dependence on fossil fuels.However,the renewable energy allocation problem remains challenging due to complex syst...Hybrid renewable energy systems(HRES)offer cost-effectiveness,low-emission power solutions,and reduced dependence on fossil fuels.However,the renewable energy allocation problem remains challenging due to complex system interactions and multiple operational constraints.This study develops a novel Multi-Neighborhood Enhanced Harris Hawks Optimization(MNEHHO)algorithm to address the allocation of HRES components.The proposed approach integrates key technical parameters,including charge-discharge efficiency,storage device configurations,and renewable energy fraction.We formulate a comprehensive mathematical model that simultaneously minimizes levelized energy costs and pollutant emissions while maintaining system reliability.The MNEHHO algorithm employs multiple neighborhood structures to enhance solution diversity and exploration capabilities.The model’s effectiveness is validated through case studies across four distinct institutional energy demand profiles.Results demonstrate that our approach successfully generates practically feasible HRES configurations while achieving significant reductions in costs and emissions compared to conventional methods.The enhanced search mechanisms of MNEHHO show superior performance in avoiding local optima and achieving consistent solutions.Experimental results demonstrate concrete improvements in solution quality(up to 46% improvement in objective value)and computational efficiency(average coefficient of variance of 24%-27%)across diverse institutional settings.This confirms the robustness and scalability of our method under various operational scenarios,providing a reliable framework for solving renewable energy allocation problems.展开更多
This paper presents a solution for energy storage system capacity configuration and renewable energy integration in smart grids using a multi-disciplinary optimization method.The solution involves a hybrid prediction ...This paper presents a solution for energy storage system capacity configuration and renewable energy integration in smart grids using a multi-disciplinary optimization method.The solution involves a hybrid prediction framework based on an improved grey regression neural network(IGRNN),which combines grey prediction,an improved BP neural network,and multiple linear regression with a dynamic weight allocation mechanism to enhance prediction accuracy.Additionally,an improved cuckoo search(ICS)algorithm is designed to empower the neural network model,incorporating a gamma distribution disturbance factor and adaptive inertia weight to balance global exploration and local exploitation,achieving a 40%faster convergence rate.A multi-objective snake optimization algorithm is also developed to optimize economic cost,grid stability,and energy utilization efficiency using energy storage capacity as the decision variable.The experimental results,based on a 937-day load dataset from a chemical park in Jiangsu Province,show that the IGRNN model has better prediction accuracy than traditional models,with an RMSE of 11.1361,an MAE of 8.264,and an R^(2) of 96.90%.The optimized energy storage system stabilizes the daily load curve at 800 kW,reduces the peak-valley difference by 62%,and decreases grid regulation pressure by 58.3%.This research provides theoretical and practical support for energy storage planning in high renewable energy proportion grids.Future work will focus on integrating weather data and dynamic optimization strategies under policy constraints to improve system applicability in real-world scenarios.展开更多
In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the op...In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the optimality conditions of the problem,we introduce appropriate affine matrix and construct an affine scaling ARC subproblem with linearized constraints.Composite step methods and reduced Hessian methods are applied to tackle the linearized constraints.As a result,a standard unconstrained ARC subproblem is deduced and its solution can supply sufficient decrease.The fraction to the boundary rule maintains the strict feasibility(for nonnegative constraints on variables)of every iteration point.Reflection techniques are employed to prevent the iterations from approaching zero too early.Under mild assumptions,global convergence of the algorithm is analysed.Preliminary numerical results are reported.展开更多
Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durabili...Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.展开更多
Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion...Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.展开更多
Optimization problems are prevalent in various fields of science and engineering,with several real-world applications characterized by high dimensionality and complex search landscapes.Starfish optimization algorithm(...Optimization problems are prevalent in various fields of science and engineering,with several real-world applications characterized by high dimensionality and complex search landscapes.Starfish optimization algorithm(SFOA)is a recently optimizer inspired by swarm intelligence,which is effective for numerical optimization,but it may encounter premature and local convergence for complex optimization problems.To address these challenges,this paper proposes the multi-strategy enhanced crested porcupine-starfish optimization algorithm(MCPSFOA).The core innovation of MCPSFOA lies in employing a hybrid strategy to improve SFOA,which integrates the exploratory mechanisms of SFOA with the diverse search capacity of the Crested Porcupine Optimizer(CPO).This synergy enhances MCPSFOA’s ability to navigate complex and multimodal search spaces.To further prevent premature convergence,MCPSFOA incorporates Lévy flight,leveraging its characteristic long and short jump patterns to enable large-scale exploration and escape from local optima.Subsequently,Gaussian mutation is applied for precise solution tuning,introducing controlled perturbations that enhance accuracy and mitigate the risk of insufficient exploitation.Notably,the population diversity enhancement mechanism periodically identifies and resets stagnant individuals,thereby consistently revitalizing population variety throughout the optimization process.MCPSFOA is rigorously evaluated on 24 classical benchmark functions(including high-dimensional cases),the CEC2017 suite,and the CEC2022 suite.MCPSFOA achieves superior overall performance with Friedman mean ranks of 2.208,2.310 and 2.417 on these benchmark functions,outperforming 11 state-of-the-art algorithms.Furthermore,the practical applicability of MCPSFOA is confirmed through its successful application to five engineering optimization cases,where it also yields excellent results.In conclusion,MCPSFOA is not only a highly effective and reliable optimizer for benchmark functions,but also a practical tool for solving real-world optimization problems.展开更多
Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structu...Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.展开更多
Optimization algorithms are crucial for solving NP-hard problems in engineering and computational sciences.Metaheuristic algorithms,in particular,have proven highly effective in complex optimization scenarios characte...Optimization algorithms are crucial for solving NP-hard problems in engineering and computational sciences.Metaheuristic algorithms,in particular,have proven highly effective in complex optimization scenarios characterized by high dimensionality and intricate variable relationships.The Mountain Gazelle Optimizer(MGO)is notably effective but struggles to balance local search refinement and global space exploration,often leading to premature convergence and entrapment in local optima.This paper presents the Improved MGO(IMGO),which integrates three synergistic enhancements:dynamic chaos mapping using piecewise chaotic sequences to boost explo-ration diversity;Opposition-Based Learning(OBL)with adaptive,diversity-driven activation to speed up convergence;and structural refinements to the position update mechanisms to enhance exploitation.The IMGO underwent a comprehensive evaluation using 52 standardised benchmark functions and seven engineering optimization problems.Benchmark evaluations showed that IMGO achieved the highest rank in best solution quality for 31 functions,the highest rank in mean performance for 18 functions,and the highest rank in worst-case performance for 14 functions among 11 competing algorithms.Statistical validation using Wilcoxon signed-rank tests confirmed that IMGO outperformed individual competitors across 16 to 50 functions,depending on the algorithm.At the same time,Friedman ranking analysis placed IMGO with an average rank of 4.15,compared to the baseline MGO’s 4.38,establishing the best overall performance.The evaluation of engineering problems revealed consistent improvements,including an optimal cost of 1.6896 for the welded beam design vs.MGO’s 1.7249,a minimum cost of 5885.33 for the pressure vessel design vs.MGO’s 6300,and a minimum weight of 2964.52 kg for the speed reducer design vs.MGO’s 2990.00 kg.Ablation studies identified OBL as the strongest individual contributor,whereas complete integration achieved superior performance through synergistic interactions among components.Computational complexity analysis established an O(T×N×5×f(P))time complexity,representing a 1.25×increase in fitness evaluation relative to the baseline MGO,validating the favorable accuracy-efficiency trade-offs for practical optimization applications.展开更多
Optimizing convolutional neural networks(CNNs)for IoT attack detection remains a critical yet challenging task due to the need to balance multiple performance metrics beyond mere accuracy.This study proposes a unified...Optimizing convolutional neural networks(CNNs)for IoT attack detection remains a critical yet challenging task due to the need to balance multiple performance metrics beyond mere accuracy.This study proposes a unified and flexible optimization framework that leverages metaheuristic algorithms to automatically optimize CNN configurations for IoT attack detection.Unlike conventional single-objective approaches,the proposed method formulates a global multi-objective fitness function that integrates accuracy,precision,recall,and model size(speed/model complexity penalty)with adjustable weights.This design enables both single-objective and weightedsum multi-objective optimization,allowing adaptive selection of optimal CNN configurations for diverse deployment requirements.Two representativemetaheuristic algorithms,GeneticAlgorithm(GA)and Particle Swarm Optimization(PSO),are employed to optimize CNNhyperparameters and structure.At each generation/iteration,the best configuration is selected as themost balanced solution across optimization objectives,i.e.,the one achieving themaximum value of the global objective function.Experimental validation on two benchmark datasets,Edge-IIoT and CIC-IoT2023,demonstrates that the proposed GA-and PSO-based models significantly enhance detection accuracy(94.8%–98.3%)and generalization compared with manually tuned CNN configurations,while maintaining compact architectures.The results confirm that the multi-objective framework effectively balances predictive performance and computational efficiency.This work establishes a generalizable and adaptive optimization strategy for deep learning-based IoT attack detection and provides a foundation for future hybrid metaheuristic extensions in broader IoT security applications.展开更多
The cloud-fog computing paradigm has emerged as a novel hybrid computing model that integrates computational resources at both fog nodes and cloud servers to address the challenges posed by dynamic and heterogeneous c...The cloud-fog computing paradigm has emerged as a novel hybrid computing model that integrates computational resources at both fog nodes and cloud servers to address the challenges posed by dynamic and heterogeneous computing networks.Finding an optimal computational resource for task offloading and then executing efficiently is a critical issue to achieve a trade-off between energy consumption and transmission delay.In this network,the task processed at fog nodes reduces transmission delay.Still,it increases energy consumption,while routing tasks to the cloud server saves energy at the cost of higher communication delay.Moreover,the order in which offloaded tasks are executed affects the system’s efficiency.For instance,executing lower-priority tasks before higher-priority jobs can disturb the reliability and stability of the system.Therefore,an efficient strategy of optimal computation offloading and task scheduling is required for operational efficacy.In this paper,we introduced a multi-objective and enhanced version of Cheeta Optimizer(CO),namely(MoECO),to jointly optimize the computation offloading and task scheduling in cloud-fog networks to minimize two competing objectives,i.e.,energy consumption and communication delay.MoECO first assigns tasks to the optimal computational nodes and then the allocated tasks are scheduled for processing based on the task priority.The mathematical modelling of CO needs improvement in computation time and convergence speed.Therefore,MoECO is proposed to increase the search capability of agents by controlling the search strategy based on a leader’s location.The adaptive step length operator is adjusted to diversify the solution and thus improves the exploration phase,i.e.,global search strategy.Consequently,this prevents the algorithm from getting trapped in the local optimal solution.Moreover,the interaction factor during the exploitation phase is also adjusted based on the location of the prey instead of the adjacent Cheetah.This increases the exploitation capability of agents,i.e.,local search capability.Furthermore,MoECO employs a multi-objective Pareto-optimal front to simultaneously minimize designated objectives.Comprehensive simulations in MATLAB demonstrate that the proposed algorithm obtains multiple solutions via a Pareto-optimal front and achieves an efficient trade-off between optimization objectives compared to baseline methods.展开更多
To address the challenges of high energy consumption and prominent costs in the traditional three-columns distillation process for cellulosic fuel ethanol,a distillation–molecular sieve coupling separation process is...To address the challenges of high energy consumption and prominent costs in the traditional three-columns distillation process for cellulosic fuel ethanol,a distillation–molecular sieve coupling separation process is proposed.This process integrates a three-column(crude distillation column,first distillation column,second distillation column)system with a 3A molecular sieve adsorption deep dehydration unit.A thermal coupling network is constructed via differential pressure design(steam from medium/high-pressure columns as mutual heat sources,reboiler liquid waste heat for feed preheating),and molecular sieve adsorption conditions are optimized.The study first performs a thermodynamic consistency test on the ethanol–water system,determines optimal non-random two-liquid(NRTL)model binary interaction parameters via experimental data regression for Aspen Plus simulation.Aiming at minimum total annual cost(TAC),Aspen Plus is used to optimize process parameters(theoretical tray number,feed location,reflux ratio,side-draw position,etc.).Economic analysis shows this process reduces CO_(2) emission costs by 27.56%,TAC by 15.58%(to 5.123×10^(6) USD·a^(−1)),and increases ethanol purity to>99.6%,providing an effective solution for green,efficient separation.展开更多
Optimization is the key to obtaining efficient utilization of resources in structural design.Due to the complex nature of truss systems,this study presents a method based on metaheuristic modelling that minimises stru...Optimization is the key to obtaining efficient utilization of resources in structural design.Due to the complex nature of truss systems,this study presents a method based on metaheuristic modelling that minimises structural weight under stress and frequency constraints.Two new algorithms,the Red Kite Optimization Algorithm(ROA)and Secretary Bird Optimization Algorithm(SBOA),are utilized on five benchmark trusses with 10,18,37,72,and 200-bar trusses.Both algorithms are evaluated against benchmarks in the literature.The results indicate that SBOA always reaches a lighter optimal.Designs with reducing structural weight ranging from 0.02%to 0.15%compared to ROA,and up to 6%–8%as compared to conventional algorithms.In addition,SBOA can achieve 15%–20%faster convergence speed and 10%–18%reduction in computational time with a smaller standard deviation over independent runs,which demonstrates its robustness and reliability.It is indicated that the adaptive exploration mechanism of SBOA,especially its Levy flight–based search strategy,can obviously improve optimization performance for low-and high-dimensional trusses.The research has implications in the context of promoting bio-inspired optimization techniques by demonstrating the viability of SBOA,a reliable model for large-scale structural design that provides significant enhancements in performance and convergence behavior.展开更多
Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introdu...Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introducing,for the first time,the Triangulation Topology Aggregation Optimizer(TTAO)integrated with parallel computing to address PV parameter estimation challenges.The effectiveness and robustness of TTAO are rigorously evaluated using two standard benchmark datasets(KC200GT and R.T.C.France solar cells)and a real-world dataset(Poly70W solar module)under single-,double-,and triple-diode configurations.Results show that TTAO consistently achieves superior accuracy by producing the lowest RMSE values and faster convergence compared to state-of-the-art metaheuristic algorithms.In addition,the integration of parallel computing significantly enhances computational efficiency,reducing execution time by up to 85%without compromising accuracy.Validation using real-world data further demonstrates TTAO’s adaptability and practical relevance in renewable energy systems,effectively bridging the gap between theoretical modeling and real-world implementation for PV system monitoring and optimization,contributing to climate mitigation through improved solar energy performance.展开更多
BACKGROUND Drug utilization research has an important role in assisting the healthcare administration to know,compute,and refine the prescription whose principal objective is to enable the rational use of drugs.Resear...BACKGROUND Drug utilization research has an important role in assisting the healthcare administration to know,compute,and refine the prescription whose principal objective is to enable the rational use of drugs.Research in developing nations relating to the cost of treatment is scarce when compared with developed countries.Thus,the drug utilization research studies from developing nations are most needed,and their number has been growing.AIM To evaluate patterns of utilization of antipsychotic drugs and direct medical cost analysis in patients newly diagnosed with schizophrenia.METHODS The present study was observational in type and based on a retrospective cohort to evaluate patterns of utilization of antipsychotic drugs using World Health Organization(WHO)core prescribing indicators and anatomical therapeutic chemical/defined daily dose indicators.We also calculated direct medical costs for a period of 6 months.RESULTS This study has found that atypical antipsychotics are the mainstay of treatment for schizophrenia in every age group and subcategories of schizophrenia.The evaluation based on WHO prescribing indicators showed a low average number of drugs per prescription and low prescribing frequency of antipsychotics from the National List of Essential Medicines 2015 and the WHO Essential Medicines List 2019.The total mean drug cost of our study was 1396 Indian rupees.The total mean cost due to the investigation in our study was 1017.34 Indian rupees.Therefore,the total mean direct medical cost incurred on patients in our study was 4337.28 Indian rupees.CONCLUSION The information from the present study can be used for reviewing and updating treatment policy at the institutional level.展开更多
The new RE 6 EL from KARL MAYER brings a breath of fresh air to raschel fabric production.Nowadays textile companies increasingly need to produce small production runs and respond to market changes with instantaneous ...The new RE 6 EL from KARL MAYER brings a breath of fresh air to raschel fabric production.Nowadays textile companies increasingly need to produce small production runs and respond to market changes with instantaneous pattern changes in order to operate profitably–meaning they require machines that offer maximum flexibility,reliability and cost efficiency.KARL MAYER understands the challenges of the market and is launching its new RE 6 EL.The Raschel machine offers the core strengths of the classic RSE 6 EL and essentially the same performance parameters,but has been further cost-optimised largely due to local production advantages.This makes the newcomer an efficiency champion in production,especially when it comes to frequent pattern changes.展开更多
Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.W...Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.展开更多
The roller is one of the fundamental elements of ore belt conveyor systems since it supports,guides,and directs material on the belt.This component comprises a body(the external tube)that rotates around a fixed shaft ...The roller is one of the fundamental elements of ore belt conveyor systems since it supports,guides,and directs material on the belt.This component comprises a body(the external tube)that rotates around a fixed shaft supported by easels.The external tube and shaft of rollers used in ore conveyor belts are mostly made of steel,resulting in high mass,hindering maintenance and replacement.Aiming to achieve mass reduction,we conducted a structural optimization of a roller with a polymeric external tube(hereafter referred to as a polymeric roller),seeking the optimal values for two design parameters:the inner diameter of the external tube and the shaft diameter.The optimization was constrained by admissible values for maximum stress,maximum deflection and misalignment angle between the shaft and bearings.A finite element model was built in Ansys Workbench to obtain the structural response of the system.The roller considered is composed of an external tube made of high-density polyethylene(HDPE),bearing seats of polyamide 6(PA6),and a steel shaft.To characterize the polymeric materials(HDPE and PA6),stress relaxation tests were conducted,and the data on shear modulus variation over time were inserted into the model to calculate Prony series terms to account for viscoelastic effects.The roller optimization was performed using surrogate modeling based on radial basis functions,with the Globalized Bounded Nelder-Mead(GBNM)algorithm as the optimizer.Two optimization cases were conducted.In the first case,concerning the roller’s initial material settings,the designs found violated the constraints and could not reduce mass.In the second case,by using PA6 in both bearing seats and the tube,a design configuration was found that respected all constraints and reduced the roller mass by 15.5%,equivalent to 5.15 kg.This study is among the first to integrate experimentally obtained viscoelastic data into the surrogate-based optimization of polymeric rollers,combining methodological innovation with industrial relevance.展开更多
文摘Restructuring of power market not only introduces competition but also brings complexity which increases overloading of Transmission Lines(TL).To obviate this complexity,this paper aims to mitigate the overloading and estimate the optimal location of Static Synchronous Compensator(STATCOM) by reducing congestion for a deregulated power system.The proposed method is based on the use of Locational Marginal Price(LMP) difference technique and congestion cost.LMPs are obtained as a by-product of Optimal Power Flow(OPF),whereas Congestion Cost(CC) is a function of difference in LMP and power flows.The effiectiveness of this approach is demonstrated by reducing the CC and solution space which can identify the TLs more suitable for placement of STATCOM.Importantly,total real power loss,reactive power loss and total CC are the three main objective functions in this optimization process.The process is implemented by developing an IEEE-69 bus test system which verifies and validates the effectiveness of proposed optimization technique.Additionally,a comparative analysis is enumerated by implementing two optimization techniques:Flower Pollination Algorithm(FPA) and Particle Swarm Optimization(PSO).The comparative analysis is sufficient to demonstrate the superiority of FPA technique over PSO technique in estimating an optimal placement of a STATCOM.The results from the load-flow analysis illustrate the reduction in CC,total real and reactive power loss using FPA technique compared to PSO technique.Overall,satisfactory results are obtained without using complex calculations which verify the effectiveness of optimization techniques.
基金Natural Science Foundation of Hubei Province(No.2025AFC041).
文摘China implemented its Action Plan of Air Pollution Prevention and Control(APAPPC)in 2013 as a major step in national air-quality management.This study treated the APAPPC as a quasi-experiment,drawing on the Grossman and Cropper models,to examine how air pollution affected individual health capital and medical service demand.Using panel data from the China Health and Retirement Longitudinal Study for 2011,2013,2015,and 2018,the analysis applied a Heckman two-stage model and difference-in-differences estimation to identify the policy's effects on medical expenditure.The results showed that the APAPPC significantly reduced annual health spending,with stronger effects among women,older adults,and rural residents.The mechanism analysis indicated that the reduction in respiratory diseases played a key role.This study provides evidence that supports further airpollution control in China and offers useful insights for other developing countries.
文摘Hybrid renewable energy systems(HRES)offer cost-effectiveness,low-emission power solutions,and reduced dependence on fossil fuels.However,the renewable energy allocation problem remains challenging due to complex system interactions and multiple operational constraints.This study develops a novel Multi-Neighborhood Enhanced Harris Hawks Optimization(MNEHHO)algorithm to address the allocation of HRES components.The proposed approach integrates key technical parameters,including charge-discharge efficiency,storage device configurations,and renewable energy fraction.We formulate a comprehensive mathematical model that simultaneously minimizes levelized energy costs and pollutant emissions while maintaining system reliability.The MNEHHO algorithm employs multiple neighborhood structures to enhance solution diversity and exploration capabilities.The model’s effectiveness is validated through case studies across four distinct institutional energy demand profiles.Results demonstrate that our approach successfully generates practically feasible HRES configurations while achieving significant reductions in costs and emissions compared to conventional methods.The enhanced search mechanisms of MNEHHO show superior performance in avoiding local optima and achieving consistent solutions.Experimental results demonstrate concrete improvements in solution quality(up to 46% improvement in objective value)and computational efficiency(average coefficient of variance of 24%-27%)across diverse institutional settings.This confirms the robustness and scalability of our method under various operational scenarios,providing a reliable framework for solving renewable energy allocation problems.
基金funded by Huaian Hongeng Group Co.,Ltd.Relying on theproject“Researchon Key Technologies of Integrated Photovoltaic and Energy Storage Electric Vehicle Charging Stations”(Project Number:SGTYHT/23-JS-001).
文摘This paper presents a solution for energy storage system capacity configuration and renewable energy integration in smart grids using a multi-disciplinary optimization method.The solution involves a hybrid prediction framework based on an improved grey regression neural network(IGRNN),which combines grey prediction,an improved BP neural network,and multiple linear regression with a dynamic weight allocation mechanism to enhance prediction accuracy.Additionally,an improved cuckoo search(ICS)algorithm is designed to empower the neural network model,incorporating a gamma distribution disturbance factor and adaptive inertia weight to balance global exploration and local exploitation,achieving a 40%faster convergence rate.A multi-objective snake optimization algorithm is also developed to optimize economic cost,grid stability,and energy utilization efficiency using energy storage capacity as the decision variable.The experimental results,based on a 937-day load dataset from a chemical park in Jiangsu Province,show that the IGRNN model has better prediction accuracy than traditional models,with an RMSE of 11.1361,an MAE of 8.264,and an R^(2) of 96.90%.The optimized energy storage system stabilizes the daily load curve at 800 kW,reduces the peak-valley difference by 62%,and decreases grid regulation pressure by 58.3%.This research provides theoretical and practical support for energy storage planning in high renewable energy proportion grids.Future work will focus on integrating weather data and dynamic optimization strategies under policy constraints to improve system applicability in real-world scenarios.
基金Supported by the National Natural Science Foundation of China(12071133)Natural Science Foundation of Henan Province(252300421993)Key Scientific Research Project of Higher Education Institutions in Henan Province(25B110005)。
文摘In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the optimality conditions of the problem,we introduce appropriate affine matrix and construct an affine scaling ARC subproblem with linearized constraints.Composite step methods and reduced Hessian methods are applied to tackle the linearized constraints.As a result,a standard unconstrained ARC subproblem is deduced and its solution can supply sufficient decrease.The fraction to the boundary rule maintains the strict feasibility(for nonnegative constraints on variables)of every iteration point.Reflection techniques are employed to prevent the iterations from approaching zero too early.Under mild assumptions,global convergence of the algorithm is analysed.Preliminary numerical results are reported.
基金National MCF Energy R&D Program(2024YFE03260300)。
文摘Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.
文摘Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.
基金supported by the National Natural Science Foundation of China(Grant No.12402139,No.52368070)supported by Hainan Provincial Natural Science Foundation of China(Grant No.524QN223)+3 种基金Scientific Research Startup Foundation of Hainan University(Grant No.RZ2300002710)State Key Laboratory of Structural Analysis,Optimization and CAE Software for Industrial Equipment,Dalian University of Technology(Grant No.GZ24107)the Horizontal Research Project(Grant No.HD-KYH-2024022)Innovative Research Projects for Postgraduate Students in Hainan Province(Grant No.Hys2025-217).
文摘Optimization problems are prevalent in various fields of science and engineering,with several real-world applications characterized by high dimensionality and complex search landscapes.Starfish optimization algorithm(SFOA)is a recently optimizer inspired by swarm intelligence,which is effective for numerical optimization,but it may encounter premature and local convergence for complex optimization problems.To address these challenges,this paper proposes the multi-strategy enhanced crested porcupine-starfish optimization algorithm(MCPSFOA).The core innovation of MCPSFOA lies in employing a hybrid strategy to improve SFOA,which integrates the exploratory mechanisms of SFOA with the diverse search capacity of the Crested Porcupine Optimizer(CPO).This synergy enhances MCPSFOA’s ability to navigate complex and multimodal search spaces.To further prevent premature convergence,MCPSFOA incorporates Lévy flight,leveraging its characteristic long and short jump patterns to enable large-scale exploration and escape from local optima.Subsequently,Gaussian mutation is applied for precise solution tuning,introducing controlled perturbations that enhance accuracy and mitigate the risk of insufficient exploitation.Notably,the population diversity enhancement mechanism periodically identifies and resets stagnant individuals,thereby consistently revitalizing population variety throughout the optimization process.MCPSFOA is rigorously evaluated on 24 classical benchmark functions(including high-dimensional cases),the CEC2017 suite,and the CEC2022 suite.MCPSFOA achieves superior overall performance with Friedman mean ranks of 2.208,2.310 and 2.417 on these benchmark functions,outperforming 11 state-of-the-art algorithms.Furthermore,the practical applicability of MCPSFOA is confirmed through its successful application to five engineering optimization cases,where it also yields excellent results.In conclusion,MCPSFOA is not only a highly effective and reliable optimizer for benchmark functions,but also a practical tool for solving real-world optimization problems.
基金supported by the National Natural Science Foundation of China(No.12202295)the International(Regional)Cooperation and Exchange Projects of the National Natural Science Foundation of China(No.W2421002)+2 种基金the Sichuan Science and Technology Program(No.2025ZNSFSC0845)Zhejiang Provincial Natural Science Foundation of China(No.ZCLZ24A0201)the Fundamental Research Funds for the Provincial Universities of Zhejiang(No.GK249909299001-004)。
文摘Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.
文摘Optimization algorithms are crucial for solving NP-hard problems in engineering and computational sciences.Metaheuristic algorithms,in particular,have proven highly effective in complex optimization scenarios characterized by high dimensionality and intricate variable relationships.The Mountain Gazelle Optimizer(MGO)is notably effective but struggles to balance local search refinement and global space exploration,often leading to premature convergence and entrapment in local optima.This paper presents the Improved MGO(IMGO),which integrates three synergistic enhancements:dynamic chaos mapping using piecewise chaotic sequences to boost explo-ration diversity;Opposition-Based Learning(OBL)with adaptive,diversity-driven activation to speed up convergence;and structural refinements to the position update mechanisms to enhance exploitation.The IMGO underwent a comprehensive evaluation using 52 standardised benchmark functions and seven engineering optimization problems.Benchmark evaluations showed that IMGO achieved the highest rank in best solution quality for 31 functions,the highest rank in mean performance for 18 functions,and the highest rank in worst-case performance for 14 functions among 11 competing algorithms.Statistical validation using Wilcoxon signed-rank tests confirmed that IMGO outperformed individual competitors across 16 to 50 functions,depending on the algorithm.At the same time,Friedman ranking analysis placed IMGO with an average rank of 4.15,compared to the baseline MGO’s 4.38,establishing the best overall performance.The evaluation of engineering problems revealed consistent improvements,including an optimal cost of 1.6896 for the welded beam design vs.MGO’s 1.7249,a minimum cost of 5885.33 for the pressure vessel design vs.MGO’s 6300,and a minimum weight of 2964.52 kg for the speed reducer design vs.MGO’s 2990.00 kg.Ablation studies identified OBL as the strongest individual contributor,whereas complete integration achieved superior performance through synergistic interactions among components.Computational complexity analysis established an O(T×N×5×f(P))time complexity,representing a 1.25×increase in fitness evaluation relative to the baseline MGO,validating the favorable accuracy-efficiency trade-offs for practical optimization applications.
文摘Optimizing convolutional neural networks(CNNs)for IoT attack detection remains a critical yet challenging task due to the need to balance multiple performance metrics beyond mere accuracy.This study proposes a unified and flexible optimization framework that leverages metaheuristic algorithms to automatically optimize CNN configurations for IoT attack detection.Unlike conventional single-objective approaches,the proposed method formulates a global multi-objective fitness function that integrates accuracy,precision,recall,and model size(speed/model complexity penalty)with adjustable weights.This design enables both single-objective and weightedsum multi-objective optimization,allowing adaptive selection of optimal CNN configurations for diverse deployment requirements.Two representativemetaheuristic algorithms,GeneticAlgorithm(GA)and Particle Swarm Optimization(PSO),are employed to optimize CNNhyperparameters and structure.At each generation/iteration,the best configuration is selected as themost balanced solution across optimization objectives,i.e.,the one achieving themaximum value of the global objective function.Experimental validation on two benchmark datasets,Edge-IIoT and CIC-IoT2023,demonstrates that the proposed GA-and PSO-based models significantly enhance detection accuracy(94.8%–98.3%)and generalization compared with manually tuned CNN configurations,while maintaining compact architectures.The results confirm that the multi-objective framework effectively balances predictive performance and computational efficiency.This work establishes a generalizable and adaptive optimization strategy for deep learning-based IoT attack detection and provides a foundation for future hybrid metaheuristic extensions in broader IoT security applications.
基金appreciation to the Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R384)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘The cloud-fog computing paradigm has emerged as a novel hybrid computing model that integrates computational resources at both fog nodes and cloud servers to address the challenges posed by dynamic and heterogeneous computing networks.Finding an optimal computational resource for task offloading and then executing efficiently is a critical issue to achieve a trade-off between energy consumption and transmission delay.In this network,the task processed at fog nodes reduces transmission delay.Still,it increases energy consumption,while routing tasks to the cloud server saves energy at the cost of higher communication delay.Moreover,the order in which offloaded tasks are executed affects the system’s efficiency.For instance,executing lower-priority tasks before higher-priority jobs can disturb the reliability and stability of the system.Therefore,an efficient strategy of optimal computation offloading and task scheduling is required for operational efficacy.In this paper,we introduced a multi-objective and enhanced version of Cheeta Optimizer(CO),namely(MoECO),to jointly optimize the computation offloading and task scheduling in cloud-fog networks to minimize two competing objectives,i.e.,energy consumption and communication delay.MoECO first assigns tasks to the optimal computational nodes and then the allocated tasks are scheduled for processing based on the task priority.The mathematical modelling of CO needs improvement in computation time and convergence speed.Therefore,MoECO is proposed to increase the search capability of agents by controlling the search strategy based on a leader’s location.The adaptive step length operator is adjusted to diversify the solution and thus improves the exploration phase,i.e.,global search strategy.Consequently,this prevents the algorithm from getting trapped in the local optimal solution.Moreover,the interaction factor during the exploitation phase is also adjusted based on the location of the prey instead of the adjacent Cheetah.This increases the exploitation capability of agents,i.e.,local search capability.Furthermore,MoECO employs a multi-objective Pareto-optimal front to simultaneously minimize designated objectives.Comprehensive simulations in MATLAB demonstrate that the proposed algorithm obtains multiple solutions via a Pareto-optimal front and achieves an efficient trade-off between optimization objectives compared to baseline methods.
基金support from the National Key Research and Development Program of China(2022YFC2106300)the National Natural Science Foundation of China(42177400).
文摘To address the challenges of high energy consumption and prominent costs in the traditional three-columns distillation process for cellulosic fuel ethanol,a distillation–molecular sieve coupling separation process is proposed.This process integrates a three-column(crude distillation column,first distillation column,second distillation column)system with a 3A molecular sieve adsorption deep dehydration unit.A thermal coupling network is constructed via differential pressure design(steam from medium/high-pressure columns as mutual heat sources,reboiler liquid waste heat for feed preheating),and molecular sieve adsorption conditions are optimized.The study first performs a thermodynamic consistency test on the ethanol–water system,determines optimal non-random two-liquid(NRTL)model binary interaction parameters via experimental data regression for Aspen Plus simulation.Aiming at minimum total annual cost(TAC),Aspen Plus is used to optimize process parameters(theoretical tray number,feed location,reflux ratio,side-draw position,etc.).Economic analysis shows this process reduces CO_(2) emission costs by 27.56%,TAC by 15.58%(to 5.123×10^(6) USD·a^(−1)),and increases ethanol purity to>99.6%,providing an effective solution for green,efficient separation.
文摘Optimization is the key to obtaining efficient utilization of resources in structural design.Due to the complex nature of truss systems,this study presents a method based on metaheuristic modelling that minimises structural weight under stress and frequency constraints.Two new algorithms,the Red Kite Optimization Algorithm(ROA)and Secretary Bird Optimization Algorithm(SBOA),are utilized on five benchmark trusses with 10,18,37,72,and 200-bar trusses.Both algorithms are evaluated against benchmarks in the literature.The results indicate that SBOA always reaches a lighter optimal.Designs with reducing structural weight ranging from 0.02%to 0.15%compared to ROA,and up to 6%–8%as compared to conventional algorithms.In addition,SBOA can achieve 15%–20%faster convergence speed and 10%–18%reduction in computational time with a smaller standard deviation over independent runs,which demonstrates its robustness and reliability.It is indicated that the adaptive exploration mechanism of SBOA,especially its Levy flight–based search strategy,can obviously improve optimization performance for low-and high-dimensional trusses.The research has implications in the context of promoting bio-inspired optimization techniques by demonstrating the viability of SBOA,a reliable model for large-scale structural design that provides significant enhancements in performance and convergence behavior.
基金funded by the Malaysian Ministry of Higher Education through the Fundamental Research Grant Scheme(FRGS/1/2024/ICT02/UCSI/02/1).
文摘Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introducing,for the first time,the Triangulation Topology Aggregation Optimizer(TTAO)integrated with parallel computing to address PV parameter estimation challenges.The effectiveness and robustness of TTAO are rigorously evaluated using two standard benchmark datasets(KC200GT and R.T.C.France solar cells)and a real-world dataset(Poly70W solar module)under single-,double-,and triple-diode configurations.Results show that TTAO consistently achieves superior accuracy by producing the lowest RMSE values and faster convergence compared to state-of-the-art metaheuristic algorithms.In addition,the integration of parallel computing significantly enhances computational efficiency,reducing execution time by up to 85%without compromising accuracy.Validation using real-world data further demonstrates TTAO’s adaptability and practical relevance in renewable energy systems,effectively bridging the gap between theoretical modeling and real-world implementation for PV system monitoring and optimization,contributing to climate mitigation through improved solar energy performance.
文摘BACKGROUND Drug utilization research has an important role in assisting the healthcare administration to know,compute,and refine the prescription whose principal objective is to enable the rational use of drugs.Research in developing nations relating to the cost of treatment is scarce when compared with developed countries.Thus,the drug utilization research studies from developing nations are most needed,and their number has been growing.AIM To evaluate patterns of utilization of antipsychotic drugs and direct medical cost analysis in patients newly diagnosed with schizophrenia.METHODS The present study was observational in type and based on a retrospective cohort to evaluate patterns of utilization of antipsychotic drugs using World Health Organization(WHO)core prescribing indicators and anatomical therapeutic chemical/defined daily dose indicators.We also calculated direct medical costs for a period of 6 months.RESULTS This study has found that atypical antipsychotics are the mainstay of treatment for schizophrenia in every age group and subcategories of schizophrenia.The evaluation based on WHO prescribing indicators showed a low average number of drugs per prescription and low prescribing frequency of antipsychotics from the National List of Essential Medicines 2015 and the WHO Essential Medicines List 2019.The total mean drug cost of our study was 1396 Indian rupees.The total mean cost due to the investigation in our study was 1017.34 Indian rupees.Therefore,the total mean direct medical cost incurred on patients in our study was 4337.28 Indian rupees.CONCLUSION The information from the present study can be used for reviewing and updating treatment policy at the institutional level.
文摘The new RE 6 EL from KARL MAYER brings a breath of fresh air to raschel fabric production.Nowadays textile companies increasingly need to produce small production runs and respond to market changes with instantaneous pattern changes in order to operate profitably–meaning they require machines that offer maximum flexibility,reliability and cost efficiency.KARL MAYER understands the challenges of the market and is launching its new RE 6 EL.The Raschel machine offers the core strengths of the classic RSE 6 EL and essentially the same performance parameters,but has been further cost-optimised largely due to local production advantages.This makes the newcomer an efficiency champion in production,especially when it comes to frequent pattern changes.
基金funded by Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R442)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.
基金funded by Vale S.A.company(www.vale.com)and the Institute of Technology Vale(ITV—www.itv.org),grant number SAP 4600048682.
文摘The roller is one of the fundamental elements of ore belt conveyor systems since it supports,guides,and directs material on the belt.This component comprises a body(the external tube)that rotates around a fixed shaft supported by easels.The external tube and shaft of rollers used in ore conveyor belts are mostly made of steel,resulting in high mass,hindering maintenance and replacement.Aiming to achieve mass reduction,we conducted a structural optimization of a roller with a polymeric external tube(hereafter referred to as a polymeric roller),seeking the optimal values for two design parameters:the inner diameter of the external tube and the shaft diameter.The optimization was constrained by admissible values for maximum stress,maximum deflection and misalignment angle between the shaft and bearings.A finite element model was built in Ansys Workbench to obtain the structural response of the system.The roller considered is composed of an external tube made of high-density polyethylene(HDPE),bearing seats of polyamide 6(PA6),and a steel shaft.To characterize the polymeric materials(HDPE and PA6),stress relaxation tests were conducted,and the data on shear modulus variation over time were inserted into the model to calculate Prony series terms to account for viscoelastic effects.The roller optimization was performed using surrogate modeling based on radial basis functions,with the Globalized Bounded Nelder-Mead(GBNM)algorithm as the optimizer.Two optimization cases were conducted.In the first case,concerning the roller’s initial material settings,the designs found violated the constraints and could not reduce mass.In the second case,by using PA6 in both bearing seats and the tube,a design configuration was found that respected all constraints and reduced the roller mass by 15.5%,equivalent to 5.15 kg.This study is among the first to integrate experimentally obtained viscoelastic data into the surrogate-based optimization of polymeric rollers,combining methodological innovation with industrial relevance.
