The hydro-hammer sampler is a new type of sampler compared with traditional ones. An important part of this new offshore sampler is that the structure of the core cutter has a significant effect on penetration and cor...The hydro-hammer sampler is a new type of sampler compared with traditional ones. An important part of this new offshore sampler is that the structure of the core cutter has a significant effect on penetration and core recovery. In our experiments, a commercial finite element code with a capability of simulating large-strain frictional contact between two or more solid bodies is used to simulate the core cutter-soil interaction. The effects of the cutting edge shape, the diameter and the edge angle on penetration are analyzed by non-liner transient dynamic analysis using a finite element method （FEM）. Simulation results show that the cutter shape clearly has an effect on the penetration and core recovery. In addition, the penetration of the sampler increases with an increase in the inside diameter of the cutter, but decreases with an increase in the cutting angle. Based on these analyses, an optimum structure of the core cutter is designed and tested in the north margin of the Dalian gulf. Experiment results show that the penetration rate is about 16.5 m/h in silty clay and 15.4 m/h in cohesive clay, while the recovery is 68% and 83.3% resoectively.展开更多
The wave functions,energy levels and matrix elements of Yb+ions are calculated using the relativistic configuration interaction plus core polarization(RCICP)method.The static and dynamic electric dipole polarizabiliti...The wave functions,energy levels and matrix elements of Yb+ions are calculated using the relativistic configuration interaction plus core polarization(RCICP)method.The static and dynamic electric dipole polarizabilities of the ground state and low-lying excited states are determined.Then,the magic wavelengths of the magnetic sublevel 6s_(1/2,m=1/2)→5d_(3/2,m=±3/2,±1/2)and 6s_(1/2,m=1/2)→5_(d5/2,m=±5/2,±3/2,±1/2)transitions in the linearly,right-handed,and left-handed polarized light are further determined.The dependence of the magic wavelengths upon the angle between the direction of magnetic field and the direction of laser polarization is analyzed.展开更多
Thermal stress in castings results from nonuniform cooling. The thermal stress and the deformation can change the casting and mold contact conditions which then alter the heat transfer between the casting and the mold...Thermal stress in castings results from nonuniform cooling. The thermal stress and the deformation can change the casting and mold contact conditions which then alter the heat transfer between the casting and the mold. The contact element method was used to study the interaction between a sand mold and a casting. The contact status was then fed back to the heat transfer analysis between the sand mold and the casting to re-evaluate the heat transfer coefficient based on the gap size or pressure between surfaces. The thermal and mechanical phenomena are then coupled in two directions. The method was applied to analyze stress in a stress frame specimen casting and a cylinder block. The results are more accurate than without consideration of the contact effects on the heat transfer.展开更多
Antarctica plays a key role in global energy balance and sea level change.It has been conventionally viewed as a whole ice body with high albedo in General Circulation Models or Regional Climate Models and the differe...Antarctica plays a key role in global energy balance and sea level change.It has been conventionally viewed as a whole ice body with high albedo in General Circulation Models or Regional Climate Models and the differences of land cover has usually been overlooked.Land cover in Antarctica is one of the most important drivers of changes in the Earth system.Detailed land cover information over the Antarctic region is necessary as spatial resolution improves in land process models.However,there is a lack of complete Antarctic land cover dataset derived from a consistent data source.To fill this data gap,we have produced a database named Antarctic Land Cover Database for the Year 2000(AntarcticaLC2000) using Landsat Enhanced Thematic Mapper Plus(ETM+) data acquired around 2000 and Moderate Resolution Imaging Spectrometer(MODIS) images acquired in the austral summer of 2003/2004 according to the criteria for the 1:100000-scale.Three land cover types were included in this map,separately,ice-free rocks,blue ice,and snow/firn.This classification legend was determined based on a review of the land cover systems in Antarctica(LCCSA) and an analysis of different land surface types and the potential of satellite data.Image classification was conducted through a combined usage of computer-aided and manual interpretation methods.A total of 4067 validation sample units were collected through visual interpretation in a stratified random sampling manner.An overall accuracy of 92.3%and the Kappa coefficient of 0.836 were achieved.Results show that the areas and percentages of ice-free rocks,blue ice,and snow/firn are 73268.81 km2(0.537%),225937.26 km2(1.656%),and 13345460.41 km2(97.807%),respectively.The comparisons with other different data proved a higher accuracy of our product and a more advantageous data quality.These indicate that AntarcticaLC2000,the new land cover dataset for Antarctica entirely derived from satellite data,is a reliable product for a broad spectrum of applications.展开更多
基金Project 20002070005126 supported by the China Geological Survey
文摘The hydro-hammer sampler is a new type of sampler compared with traditional ones. An important part of this new offshore sampler is that the structure of the core cutter has a significant effect on penetration and core recovery. In our experiments, a commercial finite element code with a capability of simulating large-strain frictional contact between two or more solid bodies is used to simulate the core cutter-soil interaction. The effects of the cutting edge shape, the diameter and the edge angle on penetration are analyzed by non-liner transient dynamic analysis using a finite element method （FEM）. Simulation results show that the cutter shape clearly has an effect on the penetration and core recovery. In addition, the penetration of the sampler increases with an increase in the inside diameter of the cutter, but decreases with an increase in the cutting angle. Based on these analyses, an optimum structure of the core cutter is designed and tested in the north margin of the Dalian gulf. Experiment results show that the penetration rate is about 16.5 m/h in silty clay and 15.4 m/h in cohesive clay, while the recovery is 68% and 83.3% resoectively.
基金the National Key Research and Development Program of China(Grant No.2022YFA1602500)the National Natural Science Foundation of China(Grant Nos.12174316 and 12174268)+2 种基金the Young Teachers Scientific Research Ability Promotion Plan of Northwest Normal University(Grant No.NWNU-LKQN2020-10)the Innovative Fundamental Research Group Project of Gansu Province,China(Grant No.20JR5RA541)the Project of the Educational Commission of Guangdong Province of China(Grant No.2020KTSCX124)。
文摘The wave functions,energy levels and matrix elements of Yb+ions are calculated using the relativistic configuration interaction plus core polarization(RCICP)method.The static and dynamic electric dipole polarizabilities of the ground state and low-lying excited states are determined.Then,the magic wavelengths of the magnetic sublevel 6s_(1/2,m=1/2)→5d_(3/2,m=±3/2,±1/2)and 6s_(1/2,m=1/2)→5_(d5/2,m=±5/2,±3/2,±1/2)transitions in the linearly,right-handed,and left-handed polarized light are further determined.The dependence of the magic wavelengths upon the angle between the direction of magnetic field and the direction of laser polarization is analyzed.
基金the National Key Basic Research and Development (973) program of China (No. 2005CB724105)
文摘Thermal stress in castings results from nonuniform cooling. The thermal stress and the deformation can change the casting and mold contact conditions which then alter the heat transfer between the casting and the mold. The contact element method was used to study the interaction between a sand mold and a casting. The contact status was then fed back to the heat transfer analysis between the sand mold and the casting to re-evaluate the heat transfer coefficient based on the gap size or pressure between surfaces. The thermal and mechanical phenomena are then coupled in two directions. The method was applied to analyze stress in a stress frame specimen casting and a cylinder block. The results are more accurate than without consideration of the contact effects on the heat transfer.
基金supported by the Chinese Arctic and Antarctic Administration.National Basic Research Program of China(Grant No.2012CB957704)National Natural Science Foundation of China(Grant Nos.41676176 & 41676182)National High-tech R&D Program of China(Grant No.2008AA09Z117)
文摘Antarctica plays a key role in global energy balance and sea level change.It has been conventionally viewed as a whole ice body with high albedo in General Circulation Models or Regional Climate Models and the differences of land cover has usually been overlooked.Land cover in Antarctica is one of the most important drivers of changes in the Earth system.Detailed land cover information over the Antarctic region is necessary as spatial resolution improves in land process models.However,there is a lack of complete Antarctic land cover dataset derived from a consistent data source.To fill this data gap,we have produced a database named Antarctic Land Cover Database for the Year 2000(AntarcticaLC2000) using Landsat Enhanced Thematic Mapper Plus(ETM+) data acquired around 2000 and Moderate Resolution Imaging Spectrometer(MODIS) images acquired in the austral summer of 2003/2004 according to the criteria for the 1:100000-scale.Three land cover types were included in this map,separately,ice-free rocks,blue ice,and snow/firn.This classification legend was determined based on a review of the land cover systems in Antarctica(LCCSA) and an analysis of different land surface types and the potential of satellite data.Image classification was conducted through a combined usage of computer-aided and manual interpretation methods.A total of 4067 validation sample units were collected through visual interpretation in a stratified random sampling manner.An overall accuracy of 92.3%and the Kappa coefficient of 0.836 were achieved.Results show that the areas and percentages of ice-free rocks,blue ice,and snow/firn are 73268.81 km2(0.537%),225937.26 km2(1.656%),and 13345460.41 km2(97.807%),respectively.The comparisons with other different data proved a higher accuracy of our product and a more advantageous data quality.These indicate that AntarcticaLC2000,the new land cover dataset for Antarctica entirely derived from satellite data,is a reliable product for a broad spectrum of applications.
