Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to t...Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to their outstanding properties,including high thermal conductivity,tunable thermal expansion coefficients,excellent mechanical strength,and low density.However,the industrial-scale application of these composites faces critical challenges during the fabrication of components with complex structures,such as inhomogeneous dispersion of graphene within the copper matrix and poor interfacial bonding between the two phases,which substantially undermine the overall performance of graphene/copper-based composites.To address these issues,the preparation methods for graphene/copper-based composite heat sinks were reviewed.For each method,a rigorous analysis was presented to clarify its inherent advantages and unavoidable restrictions.Furthermore,the latest research progress in addressing three core scientific challenges was synthesized,including uniform dispersion of graphene,interfacial optimization mechanisms,and molecular dynamics simulations for elucidating the structure-property relationships.Finally,the future development directions of graphene/copper-based composite heat sinks in engineering applications were prospected.展开更多
CO_(2)reduction technology can promote the resource utilization of carbon and help alleviate global warming and energy supply pressure.It is an effective way to achieve energy conversion and utilization.Covalent organ...CO_(2)reduction technology can promote the resource utilization of carbon and help alleviate global warming and energy supply pressure.It is an effective way to achieve energy conversion and utilization.Covalent organic frameworks(COFs)are porous crystalline materials formed by connecting organic monomers through covalent bonds.They have the characteristics of functional diversity and rich chemical properties.Their advantages,such as high porosity,a wide range of visible light absorption,and excellent charge separation efficiency,give them good potential in CO_(2)capture,separation,and conversion.Currently,Cu is a key metal in the catalytic CO_(2)reduction reaction(CO_(2)RR)for the preparation of high-value-added chemicals.The preparation of highly stable and large-pore Cu-based COFs using COFs as an ideal sacrificial template for loading Cu can be used to develop high-performance electrocatalysts and photocatalysts.In this review,we discuss the latest advancements in this field,including the development of various Cu-based COFs and their applications as catalysts for CO_(2)RR.Here,we mainly introduce the synthesis strategies,some important characterization information,and the applications of electrocatalytic and photocatalytic CO_(2)conversion using these previously reported Cu-based COFs.展开更多
Conventional treatments for non-small cell lung cancer(NSCLC)suffer from low remission rates,high drug resistance,and severe adverse effects.To leverage the therapeutic potential of reactive oxygen species(ROS),nanoca...Conventional treatments for non-small cell lung cancer(NSCLC)suffer from low remission rates,high drug resistance,and severe adverse effects.To leverage the therapeutic potential of reactive oxygen species(ROS),nanocatalytic medicine utilizes nanomaterials to generate ROS specifically within tumor sites,enabling efficient and targeted cancer treatment.In this study,hyaluronic acid(HA)-modified copper-N,N-dimethyl-Nphenylsulfonylbisamine(DMSA)-assembled nanoparticles(Cu-DMSA-HA NPs)are developed with tumor-targeting capability and efficiently catalyze ROS production via coordination chemistry.Targeted delivery is facilitated by HA surface modification through recognition of overexpressed cluster of differentiation 44 receptors on cancer cells,which enhances nanoparticle uptake.Once internalized,intracellular glutathione is depleted by the NPs,followed by a Fenton-like reaction that sustains ROS production.Both in vitro and in vivo studies demonstrate that this catalytic strategy effectively inhibits DNA replication,prevents cell cycle progression,downregulates glutathione peroxidase 4 expression,induces ferroptosis,and ultimately suppresses NSCLC progression.Overall,the readily prepared Cu-DMSA-HA NPs exhibit robust catalytic activity and tumor specificity,highlighting their strong potential for clinical translation in nanocatalytic cancer therapy.展开更多
Recently,with the efforts of food specialists,protein sources in the diet is rapidly changing.Consequently,novel products based on plant proteins or lab-grown proteins are increasingly being introduced to consumers.Ho...Recently,with the efforts of food specialists,protein sources in the diet is rapidly changing.Consequently,novel products based on plant proteins or lab-grown proteins are increasingly being introduced to consumers.However,the food industry is facing new challenges in creating natural,innovative,accessible,and nutritious dairy-free alternatives.Designing dairy-free cheese alternatives with beneficial nutritional profiles,bioavailability,and digestibility requires a thorough understanding of the molecular characteristics of plant-derived ingredients,their structural assembly,and their role in physicochemical and sensory properties of the final product.In other words,with a deep knowledge of the nature of plant-based ingredients and the intelligent control of intermolecular interactions,these ingredients can be used to produce dairy-free cheese alternatives with the same characteristics as dairy products.Therefore,this review aims to synthesize current knowledge on production techniques and key factors influencing the design of dairy-free cheese alternatives.By examining the interactions between carbohydrates,proteins,and other ingredients,as well as their ability to replicate the functional and textural properties of traditional dairy cheeses,this review provides valuable insights for the development of high-quality dairy-free cheese alternatives.In the design of these alternatives,fractionation and tissue disruption routes are employed.The difference in the number and distribution of their surface groups has a significant effect on ability of plant polysaccharides and proteins to interact with other molecules.Gel strength decreases with decreasing plant biopolymer concentration,bond strength,and crosslinking density.While heat treatment can unfold proteins and minimize their net charge,the hydrophobic attraction becomes the primary driver of protein-protein interactions in plant-based cheeses.In contrast,the 3D-structure of dairy cheeses is stabilized through a combination of hydrophobic interactions,hydrogen bonds,and calcium bridges.展开更多
In this paper,the research progress of Cu-based catalyst and the activity enhancement strategies in the hydrogenation of dimethyl oxalate(DMO)to ethylene glycol(EG)was reviewed.As a green and economical ethylene glyco...In this paper,the research progress of Cu-based catalyst and the activity enhancement strategies in the hydrogenation of dimethyl oxalate(DMO)to ethylene glycol(EG)was reviewed.As a green and economical ethylene glycol production path,the core of DMO hydrogenation of EG lies in the rational design and optimization of catalysts.This paper first introduces the background of the DMO hydrogenation system EG significance and the important effect of Cu-based catalyst in the reaction,particularly emphasizing the coordination with the Cu^(+)-Cu^(0) species catalytic effect.Then,many factors affecting the activity of Cu-based catalysts were analyzed in detail,including the equilibrium effect between Cu^(0) and Cu+species,the surface dispersion of Cu species,the interaction between metal and support,and the morphology effect of the catalyst.Regarding strategies for improving catalyst performance,this paper summarized effective measures such as optimizing support structure,adding promoters and optimizing preparation methods,and demonstrated the practical application effects of these strategies through representative catalyst examples.In addition,this paper also discusses the complex relationship between the influencing factors and catalyst performance.It points out the key directions for future research,with in-depth exploration of the correlation between catalyst structure and performance,the development of new catalysts,and the application of machine learning and big data technology in the catalyst research and development.In summary,this paper provides comprehensive theoretical guidance and practical reference for the performance optimization of Cu-based catalysts for DMO hydrogenation to EG.展开更多
The next-generation lithium(Li)metal batteries suffer severe low-temperature capacity degradation,appealing for expeditions on solutions.Herein,the feasibility of copper-based skeletons(i.e.,2D Cu foil,3D Cu mesh,and ...The next-generation lithium(Li)metal batteries suffer severe low-temperature capacity degradation,appealing for expeditions on solutions.Herein,the feasibility of copper-based skeletons(i.e.,2D Cu foil,3D Cu mesh,and CuZn mesh)frequently adopted in the stabilization of Li are evaluated at low temperatures.Li growth patterns and stripping behaviors on different skeletons and at different temperatures uncover the dendrite-free and dead-Li-less Li deposition/dissolution on CuZn mesh.Three-electrode impedance indicates the dynamic advantages of CuZn mesh,driving fast Li^(+)crossing through solidelectrolyte-interphase and charge transfer process.Notably,CuZn mesh enables the stable operation and fast charging(1.8 mA cm^(-2))of Li||LiFePO_(4)cells for over 120 cycles at-10℃ with a superior capacity retention of 88%.The success of CuZn mesh can be translated into lower temperature(-20℃)and 1.0-Ah-level pouch cells.This work provides fundamentals on improving low-temperature battery performances by skeletons with regulated spatial structure and lithiophilicity.展开更多
The contamination of water resources by phenolic compounds(PCs)presents a significant environmental hazard,necessitating the development of novel materials and methodologies for effective mitigation.In this study,a me...The contamination of water resources by phenolic compounds(PCs)presents a significant environmental hazard,necessitating the development of novel materials and methodologies for effective mitigation.In this study,a metallic copper-doped zeolitic imidazolate framework was pyrolyzed and designated as CuNC-20 for the activation of peroxymonosulfate(PMS)to degrade phenol(PE).Cu-NC-20 could effectively address the issue of metal agglomeration while simultaneously diminishing copper dissolution during the activation of PMS reactions.The Cu-NC-20 catalyst exhibited a rapid degradation rate for PE across a broad pH range(3-9)and demonstrated high tolerance towards coexisting ions.According to scavenger experiments and electron paramagnetic resonance analysis,singlet oxygen(^(1)O_(2))and high-valent copperoxo(Cu(Ⅲ))were the predominant reactive oxygen species,indicating that the system was nonradicaldominated during the degradation process.The quantitative structure-activity relationship(QSAR)between the oxidation rate constants of various substituted phenols and Hammett constants was established.It indicated that the Cu-NC-20/PMS system had the optimal oxidation rate constant withσ^(-)correlation and exhibited a typical electrophilic reaction pattern.This study provides a comprehensive understanding of the heterogeneous activation process for the selective removal of phenolic compounds.展开更多
The number of newborns born with diseases is increasing recently.Thyroid hormones(THs)are closely related to the growth and development of the newborn in the mother's womb and to the carriage of related diseases a...The number of newborns born with diseases is increasing recently.Thyroid hormones(THs)are closely related to the growth and development of the newborn in the mother's womb and to the carriage of related diseases after birth.Environmental endocrine-disrupting compounds(EDCs)have been proven to harm THs in newborns.Phthalates(PAEs),a typical class of EDCs,are commonly used in toys,childcare materials,and food contact materials,which have been closely connected with neonatal thyroid dysfunction and thyroid-related diseases.As restrictions on PAEs becomemore stringent in neonatal field,numerous PAE alternatives are emerging.Associations between exposure to PAEs and their alternatives and dysfunctions in THs have been explored.Hence,we summarized the body burdens and regional characteristics of PAEs and their alternatives in neonatal urine,cord blood,and meconium.Subsequently,the influences of PAEs and their alternatives on thyroid dysfunction,prematurity,low birth weight,fetal growth restriction,respiratory dysfunction,immune disorders,neurological disorders,and reproductive disorders in newborns were evaluated.Furthermore,we scrutinized the effects of PAEs and their alternatives on the neonatal thyroid from signaling,substance transport,and hormone production to explore the underlying mechanisms of action on neonatal thyroid and thyroid-related disorders.As the declining global trends of healthy newborns and the potential impacts of PAEs and their alternatives on thyroid function,a more comprehensive study is needed to discuss their effects on newborns and their underlying mechanisms.This review facilitates attention to the effects of PAEs and their alternatives on thyroid and thyroid-related disorders in newborns.展开更多
Over the past century,advancements in chemistry have significantly propelled human innovation,enhancing both industrial and consumer products.However,this rapid progression has resulted in chemical pollution increasin...Over the past century,advancements in chemistry have significantly propelled human innovation,enhancing both industrial and consumer products.However,this rapid progression has resulted in chemical pollution increasingly surpassing planetary boundaries,as production and release rates have outpaced our monitoring capabilities.To catalyze more impactful efforts,this study transitions from traditional chemical assessment to inverse chemical design,introducing a generative graph latent diffusion model aimed at discovering safer alternatives.In a case study on the design of green solvents for cyclohexane/benzene extraction distillation,we constructed a design database encompassing functional,environmental hazards,and process constraints.Virtual screening of previous design dataset revealed distinct trade-off trends between these design requirements.Based on the screening outcomes,an unconstrained generative model was developed,which covered a broader chemical space and demonstrated superior capabilities for structural interpolation and extrapolation.To further optimize molecular generation towards desired properties,a multi-objective latent diffusion method was applied,yielding 19 candidate molecules.Of these,7 were identified in PubChem as the most viable green solvent candidates,while the remaining 12 as potential novel candidates.Overall,this study effectively designed green solvent candidates for safer and more sustainable industrial production,setting a promising precedent for the development of environmentally friendly alternatives in other areas of chemical research.展开更多
A new report from Jeanologia highlights theurgent need for the denim industry to adopt saferalternatives to harmful chemicals.The study alsostresses reducing excessive water use in garmentfinishing.The report,compiled...A new report from Jeanologia highlights theurgent need for the denim industry to adopt saferalternatives to harmful chemicals.The study alsostresses reducing excessive water use in garmentfinishing.The report,compiled in 2024,analyzed datafrom more than ll5,000 dentm finishing processes.lt found that 24%of denim finishing processes stilluse hazardous chemicals,posing risks to both theenvironment and the health of workers.展开更多
The preparation and functionalization of polymeric capsules attract intense attention due to their application in various areas.Herein we presented an amphiphilic alternating copolymer(ACP)-based microcapsule which is...The preparation and functionalization of polymeric capsules attract intense attention due to their application in various areas.Herein we presented an amphiphilic alternating copolymer(ACP)-based microcapsule which is both robust and readily-functionalized through interfacial click polymerization.A water-in-oil emulsion was constructed to act as the reaction medium,the hydrophilic 1,3-butadiene diepoxide(BDE)in water phase reacted with the oleophilic 1,4-dibutanedithiol(BDT)in oil phase at the water-oil interface to form the amphiphilic ACP named poly(2,3-dihydroxy butylene-alt-butylene dithioether)(abbreviated as P(DHB-a-BDT)below),which would deposite in situ to form the micro-sized capsules.Significantly,the dried capsules are robust enough to be rehydrated once the water was added and almost restored their original morphologies.Further elucidation showed that the Young's modulus of these capsules exceeded 1 GPa.As long as we know,it is the first time for the mechanical properties of the ACP-based microstructures being investigated.Besides,functionalization could be achieved simultaneously with the formation process.As a proof of concept,positive-charged capsules were successfully obtained through click copolymerization.Stemming from the unique characteristics of amphiphilic ACPs which combined both merits of click chemistry and interfacial reactions,all these features of the current method as well as the resultant capsules may promote the application of the polymeric capsules.展开更多
The ectomycorrhizal fungus Paxillus involutus was inoculated onto tissue-cultures of the hybrid poplar,Populus davidiana×P.bolleana,to evaluate the elemental defense effect to heavy metals copper and cadmium at d...The ectomycorrhizal fungus Paxillus involutus was inoculated onto tissue-cultures of the hybrid poplar,Populus davidiana×P.bolleana,to evaluate the elemental defense effect to heavy metals copper and cadmium at different concentrations by simulating Alternaria alternata fungus infection.The enrichment capacity of Populus davidiana×P.bolleana for Cu and Cd was closely associated with the degree of heavy metal stress.There was a significant positive interaction of applying Cu and Cd and the inoculation with P.involutus on A.alternata leaf blight disease index.The incidence rate and disease index of leaf blight underwent a significant reduction compared with the controls.Similarly,the ratio of the area of disease spot to leaf area,incidence rate,and disease index for Populus davidiana×P.bolleana leaves inoculated with Paxillus involutus(Batsch)Fr.were significantly lower than those of their nonmycorrhizal counterparts.With increasing the degree of Cu and Cd stress,a gradual increase in the average value of the membership function for the incidence rate and disease index was observed,indicating the weakened pathogen's ability to cause infection and the improved resistance of Populus davidiana×P.bolleana to leaf blight disease under Cu and Cd stress.Moreover,superoxide dismutase enzyme activity in Populus davidiana×P.bolleana increased significantly,reaching levels of 411.0 U/g FW and 421.6 U/g FW under Cu and Cd treatments,respectively.These changes in metabolic products and antioxidant enzyme activities suggest that P.involutus may enhance the resistance of Populus davidiana×P.bolleana to the fungus,Alternaria alternata Fr.Keissel under heavy metal stress by modulating these physiological indicators.展开更多
Alternate wetting and drying irrigation(AWD)significantly influences the cooking and eating quality of rice(Oryza sativa L.).However,the mechanisms by which AWD affects rice cooking and eating quality remain unclear.L...Alternate wetting and drying irrigation(AWD)significantly influences the cooking and eating quality of rice(Oryza sativa L.).However,the mechanisms by which AWD affects rice cooking and eating quality remain unclear.Lipid and free fatty acid contents in grains correlate positively with cooking and eating quality of rice.This study examined Yangdao 6(YD6,a conventional taste indica inbred)and Nanjing 9108(NJ9108,a superior taste japonica inbred)cultivated under conventional irrigation(CI),alternate wetting and moderate drying irrigation(AWMD),and alternate wetting and severe drying irrigation(AWSD)from 10 days after transplanting to maturity.The research investigated the relationship between lipid and free fatty acid biosynthesis in grains and the cooking and eating quality of rice.Compared to CI treatment,AWMD significantly enhanced the contents of lipid,total free fatty acids(TFFAs),free unsaturated fatty acids(FUFAs),linoleic acid,and oleic acid in milled rice by increasing activities of enzymes associated with lipid synthesis,while AWSD produced opposite effects.Correlation analysis revealed that elevated levels of lipid,TFFAs,FUFAs,linoleic acid,and oleic acid contribute to improved rice cooking and eating quality.The findings demonstrate that AWMD enhances cooking and eating quality of milled rice through optimization of lipid and fatty acid synthesis in rice grains.展开更多
The nano ZrO2-supported copper-based catalysts for methane combustion were investigated by means of N2 adsorption, TEM, XRD, H2-TPR techniques and the test of methane oxidation. Two kinds of ZrO2 were used as support,...The nano ZrO2-supported copper-based catalysts for methane combustion were investigated by means of N2 adsorption, TEM, XRD, H2-TPR techniques and the test of methane oxidation. Two kinds of ZrO2 were used as support, one （ZrO2-1） was obtained from the commercial ZrO2 and the other （ZrO2-2） was issued from the thermal decomposition of zirconium nitrate. It was found that the CuO/ZrO2-2 catalyst was more active than CuO/ZrO2-1. N2 adsorption, H2-TPR and XRD measurements showed that larger surface area, better reduction property, presence of tetragonal ZrO2 and higher dispersion of active component for CuO/ZrO2-2 than that of CuO/ZrO2-1. These factors could be the dominating reasons for its higher activity for methane combustion.展开更多
An eigenvector method for ranking alternatives whose measurements are given as vague values is provided. Firstly, a positive matrix is constructed which is defined as evaluation information matrix （EIM）. Based on fo...An eigenvector method for ranking alternatives whose measurements are given as vague values is provided. Firstly, a positive matrix is constructed which is defined as evaluation information matrix （EIM）. Based on four assumptions for evaluating alternatives, a ranking eigenvector is defined. And then it is proved, based on positive matrix theory, that the EIM＇s eigenvector corresponding to the maximal eigenvalue is the ranking vector. For alternatives whose characteristics are presented by vague sets, the proposed techniques can evaluate the degree of suitability to which an alternative satisfies the decision-maker＇ s requirement efficiently.展开更多
This minireview describes the strategies for synthesis of fluorinated surfactants potentially non- bioaccumulable. Various strategies have been focused on （Ⅰ） reducing the length of the perfluorocarbon chain, （Ⅱ...This minireview describes the strategies for synthesis of fluorinated surfactants potentially non- bioaccumulable. Various strategies have been focused on （Ⅰ） reducing the length of the perfluorocarbon chain, （Ⅱ） introducing hereto atoms into the fluorocarbon chain, （Ⅲ） introducing branch （herein and after branch means the fluoro-carbon chain section is not straight）. In most cases, the surface tensions versus the surfactant concentrations have been assessed. These above strategies led to various highly fluorinated （perfluorinated or not perfluorinated） surfactants whose chemical changes enabled to obtain novel alternatives to perfluorooctanoic acid （PFOA） and perfluorooctane sulphonate （PFOS）.展开更多
Recently,inorganic copper-based halide perovskites and their derivatives(CHPs)with chemical formulas AlCumXn(A=Rb and Cs;X=Cl,Br and I;l,m,and n are integers.),have received increasing attention in the photoluminescen...Recently,inorganic copper-based halide perovskites and their derivatives(CHPs)with chemical formulas AlCumXn(A=Rb and Cs;X=Cl,Br and I;l,m,and n are integers.),have received increasing attention in the photoluminescence field,due to their lead-free,cost-effective,earth-abundant and low electronic dimensionality.Ascribed to flexible valence charge of Cu(Cu1+and Cu2+)and complex competing phases,the crystal structures and phase stabilities of CHPs are complicated and ambiguous,which limits their experimental applications.Via comprehensive first-principles calculations,we have investigated thermodynamic stabilities of possible crystal phases for AlCumXn by considering all the possible secondary phases existing in inorganic crystal structure database(ICSD).Our results are in agreement with existing experiments and further predicted the existence of 10 stable CHPs,i.e.Rb3 Cu2 Br5,Rb3 Cu2 I5,Rb Cu2 Cl3,Rb2 Cu I3,Rb2 Cu Br4,Rb Cu Br3,Rb3 Cu2 Br7,Cs3 Cu2 Br7,Cs3 Cu2 Cl7 and Cs4 Cu5 Cl9,which have not yet been reported in experiments.This work provides a phase and compositional map that may guide experiments to synthesize more novel inorganic CHPs with diverse properties for potential functional applications.展开更多
Mg alloys are emerging as potential and very promising alternatives for replacing permanent metallic implant materials such as steels and titanium in applications where the implants need to be removed following healin...Mg alloys are emerging as potential and very promising alternatives for replacing permanent metallic implant materials such as steels and titanium in applications where the implants need to be removed following healing through revision surgery.Use of Mg alloys for implant application is seen as a game changer and Mg alloys are almost perfect materials for the future in both engineering and biomedical applications.Present review therefore focuses on highlighting significance of Mg alloys in biomedical field and risks of using permanent metallic implants particularly when the implants are no longer required after the injury is healed.In this review,importance of orthopedic implants in present scenario,serious concern related to accidents that are causing permanent disabilities,demand in orthopedic implant market worldwide,potential applications of Mg based materials and their compatibility in biological environment is presented and discussed.In addition,degradation rate,major reactions associated with Mg based materials and effect of alloying elements on implant performance are also discussed based on in-vivo results.Recent advances in development of Mg alloys through various techniques and their performance in in-vitro conditions are also outlined.Possible ways to eliminate the limitations of Mg alloys include alloying,melt purification,surface alterations,surface modifications,chemical treatment,secondary processing etc.are discussed.Challenges and opportunities for Mg alloys to become ideal implant material is also addressed.展开更多
Various Cu/ZnO/Al2O3 catalysts have been synthesized by different aluminum emulsions as aluminum sources and their pertormances tor methanol synthesis from syngas have been investigated. The influences of preparation ...Various Cu/ZnO/Al2O3 catalysts have been synthesized by different aluminum emulsions as aluminum sources and their pertormances tor methanol synthesis from syngas have been investigated. The influences of preparation methods of aluminum emulsions on physicochemical and catalytic properties of catalysts were studied by XRD, SEM, XPS,N2 adsorption-desorption techniques and methanol synthesis from syngas. The preparation methods of aluminum emulsions were found to influence the catalytic activity, CuO crystallite size, surface area and Cu0 surface area and reduction process. The results show that the catalyst CN using the aluminum source prepared by addition the ammonia into the aluminum nitrate （NP） exhibited the best catalytic performance for methanol synthesis from syngas.展开更多
Catalytic wet air oxidation(CWAO) can degrade some refractory pollutants at a low cost to improve the biodegradability of wastewater. However, in the presence of high temperature and high pressure and strong oxidizing...Catalytic wet air oxidation(CWAO) can degrade some refractory pollutants at a low cost to improve the biodegradability of wastewater. However, in the presence of high temperature and high pressure and strong oxidizing free radicals, the stability of catalysts is often insufficient, which has become a bottleneck in the application of CWAO. In this paper, a copper-based catalyst with excellent hydrothermal stability was designed and prepared. TiO_(2) with excellent stability was used as the carrier to ensure the longterm anchoring of copper and reduce the leaching of the catalyst. The one pot sol–gel method was used to ensure the super dispersion and uniform distribution of copper nanoparticles on the carrier, so as to ensure that more active centers could be retained in a longer period. Experiments show that the catalyst prepared by this method has good stability and catalytic activity, and the catalytic effect is not significantly reduced after 10 cycles of use. The oxidation degradation experiment of m-cresol with the strongest biological toxicity and the most difficult to degrade in coal chemical wastewater was carried out with this catalyst. The results showed that under the conditions of 140℃, 2 MPa and 2 h, m-cresol with a concentration of up to 1000 mg·L^(-1) could be completely degraded, and the COD removal rate could reach 79.15%. The biological toxicity of wastewater was significantly reduced. The development of the catalyst system has greatly improved the feasibility of CWAO in the treatment of refractory wastewater such as coal chemical wastewater.展开更多
基金Research Start-Up Fund Project of Anhui Polytechnic University(S022023017)University Research Project of Anhui Province(2023AH050937)+1 种基金Anhui Polytechnic University Research Foundation for Introducing Talents(2022YQQ003)Anhui Province Key Laboratory of Intelligent Vehicle Chassis by Wire。
文摘Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to their outstanding properties,including high thermal conductivity,tunable thermal expansion coefficients,excellent mechanical strength,and low density.However,the industrial-scale application of these composites faces critical challenges during the fabrication of components with complex structures,such as inhomogeneous dispersion of graphene within the copper matrix and poor interfacial bonding between the two phases,which substantially undermine the overall performance of graphene/copper-based composites.To address these issues,the preparation methods for graphene/copper-based composite heat sinks were reviewed.For each method,a rigorous analysis was presented to clarify its inherent advantages and unavoidable restrictions.Furthermore,the latest research progress in addressing three core scientific challenges was synthesized,including uniform dispersion of graphene,interfacial optimization mechanisms,and molecular dynamics simulations for elucidating the structure-property relationships.Finally,the future development directions of graphene/copper-based composite heat sinks in engineering applications were prospected.
文摘CO_(2)reduction technology can promote the resource utilization of carbon and help alleviate global warming and energy supply pressure.It is an effective way to achieve energy conversion and utilization.Covalent organic frameworks(COFs)are porous crystalline materials formed by connecting organic monomers through covalent bonds.They have the characteristics of functional diversity and rich chemical properties.Their advantages,such as high porosity,a wide range of visible light absorption,and excellent charge separation efficiency,give them good potential in CO_(2)capture,separation,and conversion.Currently,Cu is a key metal in the catalytic CO_(2)reduction reaction(CO_(2)RR)for the preparation of high-value-added chemicals.The preparation of highly stable and large-pore Cu-based COFs using COFs as an ideal sacrificial template for loading Cu can be used to develop high-performance electrocatalysts and photocatalysts.In this review,we discuss the latest advancements in this field,including the development of various Cu-based COFs and their applications as catalysts for CO_(2)RR.Here,we mainly introduce the synthesis strategies,some important characterization information,and the applications of electrocatalytic and photocatalytic CO_(2)conversion using these previously reported Cu-based COFs.
基金supported by National Natural Science Foundation of China(82272943)Shanghai Municipal Science and Technology Commission(21Y11913400)Fundamental Research Funds for the Central Universities and National Key Research and Development Program of China(2022YFC2407405).
文摘Conventional treatments for non-small cell lung cancer(NSCLC)suffer from low remission rates,high drug resistance,and severe adverse effects.To leverage the therapeutic potential of reactive oxygen species(ROS),nanocatalytic medicine utilizes nanomaterials to generate ROS specifically within tumor sites,enabling efficient and targeted cancer treatment.In this study,hyaluronic acid(HA)-modified copper-N,N-dimethyl-Nphenylsulfonylbisamine(DMSA)-assembled nanoparticles(Cu-DMSA-HA NPs)are developed with tumor-targeting capability and efficiently catalyze ROS production via coordination chemistry.Targeted delivery is facilitated by HA surface modification through recognition of overexpressed cluster of differentiation 44 receptors on cancer cells,which enhances nanoparticle uptake.Once internalized,intracellular glutathione is depleted by the NPs,followed by a Fenton-like reaction that sustains ROS production.Both in vitro and in vivo studies demonstrate that this catalytic strategy effectively inhibits DNA replication,prevents cell cycle progression,downregulates glutathione peroxidase 4 expression,induces ferroptosis,and ultimately suppresses NSCLC progression.Overall,the readily prepared Cu-DMSA-HA NPs exhibit robust catalytic activity and tumor specificity,highlighting their strong potential for clinical translation in nanocatalytic cancer therapy.
基金funding from the European Union's Horizon 2022 Research and Innovation Programme under the Marie Sklodowska-Curie(MSCA-Postdoctoral Fellowships 2022),grant agreement No.101105558-NovelPBC-HORIZON-MSCA-2022-PF-01。
文摘Recently,with the efforts of food specialists,protein sources in the diet is rapidly changing.Consequently,novel products based on plant proteins or lab-grown proteins are increasingly being introduced to consumers.However,the food industry is facing new challenges in creating natural,innovative,accessible,and nutritious dairy-free alternatives.Designing dairy-free cheese alternatives with beneficial nutritional profiles,bioavailability,and digestibility requires a thorough understanding of the molecular characteristics of plant-derived ingredients,their structural assembly,and their role in physicochemical and sensory properties of the final product.In other words,with a deep knowledge of the nature of plant-based ingredients and the intelligent control of intermolecular interactions,these ingredients can be used to produce dairy-free cheese alternatives with the same characteristics as dairy products.Therefore,this review aims to synthesize current knowledge on production techniques and key factors influencing the design of dairy-free cheese alternatives.By examining the interactions between carbohydrates,proteins,and other ingredients,as well as their ability to replicate the functional and textural properties of traditional dairy cheeses,this review provides valuable insights for the development of high-quality dairy-free cheese alternatives.In the design of these alternatives,fractionation and tissue disruption routes are employed.The difference in the number and distribution of their surface groups has a significant effect on ability of plant polysaccharides and proteins to interact with other molecules.Gel strength decreases with decreasing plant biopolymer concentration,bond strength,and crosslinking density.While heat treatment can unfold proteins and minimize their net charge,the hydrophobic attraction becomes the primary driver of protein-protein interactions in plant-based cheeses.In contrast,the 3D-structure of dairy cheeses is stabilized through a combination of hydrophobic interactions,hydrogen bonds,and calcium bridges.
基金supported by Guangxi Science and Technology Major Program(GuikeAA23062018)the Academic Newcomer Award Project of Guangxi University(2025GXUXSXR07)。
文摘In this paper,the research progress of Cu-based catalyst and the activity enhancement strategies in the hydrogenation of dimethyl oxalate(DMO)to ethylene glycol(EG)was reviewed.As a green and economical ethylene glycol production path,the core of DMO hydrogenation of EG lies in the rational design and optimization of catalysts.This paper first introduces the background of the DMO hydrogenation system EG significance and the important effect of Cu-based catalyst in the reaction,particularly emphasizing the coordination with the Cu^(+)-Cu^(0) species catalytic effect.Then,many factors affecting the activity of Cu-based catalysts were analyzed in detail,including the equilibrium effect between Cu^(0) and Cu+species,the surface dispersion of Cu species,the interaction between metal and support,and the morphology effect of the catalyst.Regarding strategies for improving catalyst performance,this paper summarized effective measures such as optimizing support structure,adding promoters and optimizing preparation methods,and demonstrated the practical application effects of these strategies through representative catalyst examples.In addition,this paper also discusses the complex relationship between the influencing factors and catalyst performance.It points out the key directions for future research,with in-depth exploration of the correlation between catalyst structure and performance,the development of new catalysts,and the application of machine learning and big data technology in the catalyst research and development.In summary,this paper provides comprehensive theoretical guidance and practical reference for the performance optimization of Cu-based catalysts for DMO hydrogenation to EG.
基金the funding support of the National Natural Science Foundation of China(52103342,22209032 and 22479134)Natural Science Foundation of Zhejiang Province(LY24B030008)+1 种基金China Jiliang University Research Fund Program for Young Scholars(221040)the funding support of the Zhejiang Provincial College Students’Scientific Research and Innovation Activity(Xinmiao Talent)Program(2023R409A045)。
文摘The next-generation lithium(Li)metal batteries suffer severe low-temperature capacity degradation,appealing for expeditions on solutions.Herein,the feasibility of copper-based skeletons(i.e.,2D Cu foil,3D Cu mesh,and CuZn mesh)frequently adopted in the stabilization of Li are evaluated at low temperatures.Li growth patterns and stripping behaviors on different skeletons and at different temperatures uncover the dendrite-free and dead-Li-less Li deposition/dissolution on CuZn mesh.Three-electrode impedance indicates the dynamic advantages of CuZn mesh,driving fast Li^(+)crossing through solidelectrolyte-interphase and charge transfer process.Notably,CuZn mesh enables the stable operation and fast charging(1.8 mA cm^(-2))of Li||LiFePO_(4)cells for over 120 cycles at-10℃ with a superior capacity retention of 88%.The success of CuZn mesh can be translated into lower temperature(-20℃)and 1.0-Ah-level pouch cells.This work provides fundamentals on improving low-temperature battery performances by skeletons with regulated spatial structure and lithiophilicity.
基金the financial support from Sichuan Program of Science and Technology(No.2021ZDZX0012)the National Natural Science Foundation of China(No.52200105)。
文摘The contamination of water resources by phenolic compounds(PCs)presents a significant environmental hazard,necessitating the development of novel materials and methodologies for effective mitigation.In this study,a metallic copper-doped zeolitic imidazolate framework was pyrolyzed and designated as CuNC-20 for the activation of peroxymonosulfate(PMS)to degrade phenol(PE).Cu-NC-20 could effectively address the issue of metal agglomeration while simultaneously diminishing copper dissolution during the activation of PMS reactions.The Cu-NC-20 catalyst exhibited a rapid degradation rate for PE across a broad pH range(3-9)and demonstrated high tolerance towards coexisting ions.According to scavenger experiments and electron paramagnetic resonance analysis,singlet oxygen(^(1)O_(2))and high-valent copperoxo(Cu(Ⅲ))were the predominant reactive oxygen species,indicating that the system was nonradicaldominated during the degradation process.The quantitative structure-activity relationship(QSAR)between the oxidation rate constants of various substituted phenols and Hammett constants was established.It indicated that the Cu-NC-20/PMS system had the optimal oxidation rate constant withσ^(-)correlation and exhibited a typical electrophilic reaction pattern.This study provides a comprehensive understanding of the heterogeneous activation process for the selective removal of phenolic compounds.
基金supported by the National Natural Science Foundation of China(No.22225605)the National Key Research and Development Program of China(No.2023YFC3706600)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB0750200).
文摘The number of newborns born with diseases is increasing recently.Thyroid hormones(THs)are closely related to the growth and development of the newborn in the mother's womb and to the carriage of related diseases after birth.Environmental endocrine-disrupting compounds(EDCs)have been proven to harm THs in newborns.Phthalates(PAEs),a typical class of EDCs,are commonly used in toys,childcare materials,and food contact materials,which have been closely connected with neonatal thyroid dysfunction and thyroid-related diseases.As restrictions on PAEs becomemore stringent in neonatal field,numerous PAE alternatives are emerging.Associations between exposure to PAEs and their alternatives and dysfunctions in THs have been explored.Hence,we summarized the body burdens and regional characteristics of PAEs and their alternatives in neonatal urine,cord blood,and meconium.Subsequently,the influences of PAEs and their alternatives on thyroid dysfunction,prematurity,low birth weight,fetal growth restriction,respiratory dysfunction,immune disorders,neurological disorders,and reproductive disorders in newborns were evaluated.Furthermore,we scrutinized the effects of PAEs and their alternatives on the neonatal thyroid from signaling,substance transport,and hormone production to explore the underlying mechanisms of action on neonatal thyroid and thyroid-related disorders.As the declining global trends of healthy newborns and the potential impacts of PAEs and their alternatives on thyroid function,a more comprehensive study is needed to discuss their effects on newborns and their underlying mechanisms.This review facilitates attention to the effects of PAEs and their alternatives on thyroid and thyroid-related disorders in newborns.
基金supported by Shanghai Science and Technology Commission Project(No.21DZ1201502)Shanghai Municipal Bureau of Ecology and Environment(Shanghai Environ-mental Science[2023]No.40)+1 种基金the Interdisciplinary Joint Research Project of Tongji University(No.2022-4-YB-12)Shanghai Science and Technology Commission Project(No.22DZ2200200).
文摘Over the past century,advancements in chemistry have significantly propelled human innovation,enhancing both industrial and consumer products.However,this rapid progression has resulted in chemical pollution increasingly surpassing planetary boundaries,as production and release rates have outpaced our monitoring capabilities.To catalyze more impactful efforts,this study transitions from traditional chemical assessment to inverse chemical design,introducing a generative graph latent diffusion model aimed at discovering safer alternatives.In a case study on the design of green solvents for cyclohexane/benzene extraction distillation,we constructed a design database encompassing functional,environmental hazards,and process constraints.Virtual screening of previous design dataset revealed distinct trade-off trends between these design requirements.Based on the screening outcomes,an unconstrained generative model was developed,which covered a broader chemical space and demonstrated superior capabilities for structural interpolation and extrapolation.To further optimize molecular generation towards desired properties,a multi-objective latent diffusion method was applied,yielding 19 candidate molecules.Of these,7 were identified in PubChem as the most viable green solvent candidates,while the remaining 12 as potential novel candidates.Overall,this study effectively designed green solvent candidates for safer and more sustainable industrial production,setting a promising precedent for the development of environmentally friendly alternatives in other areas of chemical research.
文摘A new report from Jeanologia highlights theurgent need for the denim industry to adopt saferalternatives to harmful chemicals.The study alsostresses reducing excessive water use in garmentfinishing.The report,compiled in 2024,analyzed datafrom more than ll5,000 dentm finishing processes.lt found that 24%of denim finishing processes stilluse hazardous chemicals,posing risks to both theenvironment and the health of workers.
基金financially supported by the Fundamental Research Funds for Central Universities(No.24D110627)。
文摘The preparation and functionalization of polymeric capsules attract intense attention due to their application in various areas.Herein we presented an amphiphilic alternating copolymer(ACP)-based microcapsule which is both robust and readily-functionalized through interfacial click polymerization.A water-in-oil emulsion was constructed to act as the reaction medium,the hydrophilic 1,3-butadiene diepoxide(BDE)in water phase reacted with the oleophilic 1,4-dibutanedithiol(BDT)in oil phase at the water-oil interface to form the amphiphilic ACP named poly(2,3-dihydroxy butylene-alt-butylene dithioether)(abbreviated as P(DHB-a-BDT)below),which would deposite in situ to form the micro-sized capsules.Significantly,the dried capsules are robust enough to be rehydrated once the water was added and almost restored their original morphologies.Further elucidation showed that the Young's modulus of these capsules exceeded 1 GPa.As long as we know,it is the first time for the mechanical properties of the ACP-based microstructures being investigated.Besides,functionalization could be achieved simultaneously with the formation process.As a proof of concept,positive-charged capsules were successfully obtained through click copolymerization.Stemming from the unique characteristics of amphiphilic ACPs which combined both merits of click chemistry and interfacial reactions,all these features of the current method as well as the resultant capsules may promote the application of the polymeric capsules.
基金supported by the National Natural Science Foundation of China(31800542)Natural Science Foundation of Heilongjiang Province(LH2023C105)Heilongjiang Research Institutes Basic Research Funding Project(LKSB2024-9)。
文摘The ectomycorrhizal fungus Paxillus involutus was inoculated onto tissue-cultures of the hybrid poplar,Populus davidiana×P.bolleana,to evaluate the elemental defense effect to heavy metals copper and cadmium at different concentrations by simulating Alternaria alternata fungus infection.The enrichment capacity of Populus davidiana×P.bolleana for Cu and Cd was closely associated with the degree of heavy metal stress.There was a significant positive interaction of applying Cu and Cd and the inoculation with P.involutus on A.alternata leaf blight disease index.The incidence rate and disease index of leaf blight underwent a significant reduction compared with the controls.Similarly,the ratio of the area of disease spot to leaf area,incidence rate,and disease index for Populus davidiana×P.bolleana leaves inoculated with Paxillus involutus(Batsch)Fr.were significantly lower than those of their nonmycorrhizal counterparts.With increasing the degree of Cu and Cd stress,a gradual increase in the average value of the membership function for the incidence rate and disease index was observed,indicating the weakened pathogen's ability to cause infection and the improved resistance of Populus davidiana×P.bolleana to leaf blight disease under Cu and Cd stress.Moreover,superoxide dismutase enzyme activity in Populus davidiana×P.bolleana increased significantly,reaching levels of 411.0 U/g FW and 421.6 U/g FW under Cu and Cd treatments,respectively.These changes in metabolic products and antioxidant enzyme activities suggest that P.involutus may enhance the resistance of Populus davidiana×P.bolleana to the fungus,Alternaria alternata Fr.Keissel under heavy metal stress by modulating these physiological indicators.
基金supported by the Natural Science Foundation of Jiangsu Province,China(BK20241931 and BK 20221371)the National Natural Science Foundation of China(32071943,32372214,and 31901444)the National Key Research and Development Program of China(2022YFD2300304)。
文摘Alternate wetting and drying irrigation(AWD)significantly influences the cooking and eating quality of rice(Oryza sativa L.).However,the mechanisms by which AWD affects rice cooking and eating quality remain unclear.Lipid and free fatty acid contents in grains correlate positively with cooking and eating quality of rice.This study examined Yangdao 6(YD6,a conventional taste indica inbred)and Nanjing 9108(NJ9108,a superior taste japonica inbred)cultivated under conventional irrigation(CI),alternate wetting and moderate drying irrigation(AWMD),and alternate wetting and severe drying irrigation(AWSD)from 10 days after transplanting to maturity.The research investigated the relationship between lipid and free fatty acid biosynthesis in grains and the cooking and eating quality of rice.Compared to CI treatment,AWMD significantly enhanced the contents of lipid,total free fatty acids(TFFAs),free unsaturated fatty acids(FUFAs),linoleic acid,and oleic acid in milled rice by increasing activities of enzymes associated with lipid synthesis,while AWSD produced opposite effects.Correlation analysis revealed that elevated levels of lipid,TFFAs,FUFAs,linoleic acid,and oleic acid contribute to improved rice cooking and eating quality.The findings demonstrate that AWMD enhances cooking and eating quality of milled rice through optimization of lipid and fatty acid synthesis in rice grains.
文摘The nano ZrO2-supported copper-based catalysts for methane combustion were investigated by means of N2 adsorption, TEM, XRD, H2-TPR techniques and the test of methane oxidation. Two kinds of ZrO2 were used as support, one （ZrO2-1） was obtained from the commercial ZrO2 and the other （ZrO2-2） was issued from the thermal decomposition of zirconium nitrate. It was found that the CuO/ZrO2-2 catalyst was more active than CuO/ZrO2-1. N2 adsorption, H2-TPR and XRD measurements showed that larger surface area, better reduction property, presence of tetragonal ZrO2 and higher dispersion of active component for CuO/ZrO2-2 than that of CuO/ZrO2-1. These factors could be the dominating reasons for its higher activity for methane combustion.
基金Sponsored by the Basic Research Foundation of Beijing Institute of Technology(BIT-UBF-20070842009)
文摘An eigenvector method for ranking alternatives whose measurements are given as vague values is provided. Firstly, a positive matrix is constructed which is defined as evaluation information matrix （EIM）. Based on four assumptions for evaluating alternatives, a ranking eigenvector is defined. And then it is proved, based on positive matrix theory, that the EIM＇s eigenvector corresponding to the maximal eigenvalue is the ranking vector. For alternatives whose characteristics are presented by vague sets, the proposed techniques can evaluate the degree of suitability to which an alternative satisfies the decision-maker＇ s requirement efficiently.
基金supported by the National Natural Science Foundation of China(No.21102167)the Science and Technology Commission of Shanghai Municipality(No.12DZ1930902)Shanghai Green Chemical Engineering Technology Research Center and the Knowledge Innovation Program of the Chinese Academy of Sciences
文摘This minireview describes the strategies for synthesis of fluorinated surfactants potentially non- bioaccumulable. Various strategies have been focused on （Ⅰ） reducing the length of the perfluorocarbon chain, （Ⅱ） introducing hereto atoms into the fluorocarbon chain, （Ⅲ） introducing branch （herein and after branch means the fluoro-carbon chain section is not straight）. In most cases, the surface tensions versus the surfactant concentrations have been assessed. These above strategies led to various highly fluorinated （perfluorinated or not perfluorinated） surfactants whose chemical changes enabled to obtain novel alternatives to perfluorooctanoic acid （PFOA） and perfluorooctane sulphonate （PFOS）.
基金funding support from National Natural Science Foundation of China(grant No.11674237 and 51602211)National Key Research and Development Program of China(grant No.2016YFB0700700)+2 种基金Natural Science Foundation of Jiangsu Province of China(grant No.BK20160299)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)China Post-doctoral Foundation(grant No.7131705619).
文摘Recently,inorganic copper-based halide perovskites and their derivatives(CHPs)with chemical formulas AlCumXn(A=Rb and Cs;X=Cl,Br and I;l,m,and n are integers.),have received increasing attention in the photoluminescence field,due to their lead-free,cost-effective,earth-abundant and low electronic dimensionality.Ascribed to flexible valence charge of Cu(Cu1+and Cu2+)and complex competing phases,the crystal structures and phase stabilities of CHPs are complicated and ambiguous,which limits their experimental applications.Via comprehensive first-principles calculations,we have investigated thermodynamic stabilities of possible crystal phases for AlCumXn by considering all the possible secondary phases existing in inorganic crystal structure database(ICSD).Our results are in agreement with existing experiments and further predicted the existence of 10 stable CHPs,i.e.Rb3 Cu2 Br5,Rb3 Cu2 I5,Rb Cu2 Cl3,Rb2 Cu I3,Rb2 Cu Br4,Rb Cu Br3,Rb3 Cu2 Br7,Cs3 Cu2 Br7,Cs3 Cu2 Cl7 and Cs4 Cu5 Cl9,which have not yet been reported in experiments.This work provides a phase and compositional map that may guide experiments to synthesize more novel inorganic CHPs with diverse properties for potential functional applications.
文摘Mg alloys are emerging as potential and very promising alternatives for replacing permanent metallic implant materials such as steels and titanium in applications where the implants need to be removed following healing through revision surgery.Use of Mg alloys for implant application is seen as a game changer and Mg alloys are almost perfect materials for the future in both engineering and biomedical applications.Present review therefore focuses on highlighting significance of Mg alloys in biomedical field and risks of using permanent metallic implants particularly when the implants are no longer required after the injury is healed.In this review,importance of orthopedic implants in present scenario,serious concern related to accidents that are causing permanent disabilities,demand in orthopedic implant market worldwide,potential applications of Mg based materials and their compatibility in biological environment is presented and discussed.In addition,degradation rate,major reactions associated with Mg based materials and effect of alloying elements on implant performance are also discussed based on in-vivo results.Recent advances in development of Mg alloys through various techniques and their performance in in-vitro conditions are also outlined.Possible ways to eliminate the limitations of Mg alloys include alloying,melt purification,surface alterations,surface modifications,chemical treatment,secondary processing etc.are discussed.Challenges and opportunities for Mg alloys to become ideal implant material is also addressed.
文摘Various Cu/ZnO/Al2O3 catalysts have been synthesized by different aluminum emulsions as aluminum sources and their pertormances tor methanol synthesis from syngas have been investigated. The influences of preparation methods of aluminum emulsions on physicochemical and catalytic properties of catalysts were studied by XRD, SEM, XPS,N2 adsorption-desorption techniques and methanol synthesis from syngas. The preparation methods of aluminum emulsions were found to influence the catalytic activity, CuO crystallite size, surface area and Cu0 surface area and reduction process. The results show that the catalyst CN using the aluminum source prepared by addition the ammonia into the aluminum nitrate （NP） exhibited the best catalytic performance for methanol synthesis from syngas.
基金support provided by the National Natural Science Foundation of China (21978143 and 21878164)。
文摘Catalytic wet air oxidation(CWAO) can degrade some refractory pollutants at a low cost to improve the biodegradability of wastewater. However, in the presence of high temperature and high pressure and strong oxidizing free radicals, the stability of catalysts is often insufficient, which has become a bottleneck in the application of CWAO. In this paper, a copper-based catalyst with excellent hydrothermal stability was designed and prepared. TiO_(2) with excellent stability was used as the carrier to ensure the longterm anchoring of copper and reduce the leaching of the catalyst. The one pot sol–gel method was used to ensure the super dispersion and uniform distribution of copper nanoparticles on the carrier, so as to ensure that more active centers could be retained in a longer period. Experiments show that the catalyst prepared by this method has good stability and catalytic activity, and the catalytic effect is not significantly reduced after 10 cycles of use. The oxidation degradation experiment of m-cresol with the strongest biological toxicity and the most difficult to degrade in coal chemical wastewater was carried out with this catalyst. The results showed that under the conditions of 140℃, 2 MPa and 2 h, m-cresol with a concentration of up to 1000 mg·L^(-1) could be completely degraded, and the COD removal rate could reach 79.15%. The biological toxicity of wastewater was significantly reduced. The development of the catalyst system has greatly improved the feasibility of CWAO in the treatment of refractory wastewater such as coal chemical wastewater.
