The effects of rare earth Ce on the microstructure and mechanical properties of impure copper containing Pb were investigated using OM,SEM,EPMA,TEM and tensile testing.TEM and EDS analysis reveal that spherical CePb3 ...The effects of rare earth Ce on the microstructure and mechanical properties of impure copper containing Pb were investigated using OM,SEM,EPMA,TEM and tensile testing.TEM and EDS analysis reveal that spherical CePb3 particles form after Ce addition.CePb3 particles,with average size of^3.6μm,homogenously distribute in the Cu matrix.Due to small lattice misfit(~4.62%)with Cu matrix,CePb3 particles can act as effective nucleation sites beneficial to the grain refinement.Pb at grain boundaries seriously deteriorates the mechanical properties of Cu.The tensile strength and the elongation of Cu-0.1 Pb are decreased by 43.1%and 56.7%compared with those of pure copper,respectively.Ce can purify grain boundaries,cause the precipitation of CePb3 particles and refine grain sizes,which contribute to significant improvement of the mechanical properties of Cu.Compared with Cu-0.1Pb,the tensile strength(179 MPa)and the elongation(38.5%)of Cu-0.1Pb-0.3Ce are increased by 117.6%and 151.6%,respectively.展开更多
Boro-germanate glasses containing copper, i.e., xCuO(1-x)[GeO2·B2O3] subjected to gamma irradiation, were studied by means of EPR. Comparisons were made with the xCuO·(1-x)[Na2B4O7] system. Irradiation induc...Boro-germanate glasses containing copper, i.e., xCuO(1-x)[GeO2·B2O3] subjected to gamma irradiation, were studied by means of EPR. Comparisons were made with the xCuO·(1-x)[Na2B4O7] system. Irradiation induced centers were detected. These are: electron trapped at a hydrogen compensated germanium ion centers; boron oxygen hole centers and electron trapped at an oxygen vacancy centers. Strong dependence of the paramagnetic irradiation-induced centers concentration on the CuO content of the sample was evidenced.展开更多
A Cu/Al galvanic couple was established to study the influence of the oxidantKMnO_4 on the film-forming process of rare earth metal (REM) conversion coating on LY12 aluminumalloy. It is found that the galvanic couple ...A Cu/Al galvanic couple was established to study the influence of the oxidantKMnO_4 on the film-forming process of rare earth metal (REM) conversion coating on LY12 aluminumalloy. It is found that the galvanic couple simulative experiment accords with the actual immersion,and it can be substantially used to simulate the behavior of LY12 aluminum alloy in thefilm-forming process. It is showed that the formation of the coating is quickened in CeCl_3 solutioncontaining KMnO_4 compared with that not containing KMnO_4. XPS results reveal that the coatingformed on cathode is composed of oxide or hydroxide of Ce and Mn, so the mechanism of formation ofREM conversion coating changes when KMnO4 is added.展开更多
A copper coating was deposited by electroless plating on the surfaces of urea-formaldehyde microcap- sules containing paraffin （UFP） particles. This composite microcapsule structure had low infrared OR） emissivity ...A copper coating was deposited by electroless plating on the surfaces of urea-formaldehyde microcap- sules containing paraffin （UFP） particles. This composite microcapsule structure had low infrared OR） emissivity and maintained a constant temperature, and could be used in IR stealth applications. The eiectroless copper layer formation and its micro-appearance, and the effect of the copper layer on the IR emissivity and thermal properties of the composite microcapsules were investigated. The IR emissivity of the composite microcapsules at wavelengths of 1-14 μm gradually decreased with increasing copper mass on the surface. After formation of an integrated copper layer, the rate of IR emissivity decrease was lower. This is because the copper coating improves the surface conductivity of the UFP; a high conductivity results in high reflectivity, which leads to a decrease in IR emissivity. The lowest IR emissivity achieved was 0.68. The phase-change enthalpy of the composite microcapsules decreased with increasing amount of copper coated on the surface because of the high density of copper. When the mass increase of the UFP after electroless copper plating was about 300%, the composite microcapsules had low IR emissivity （about 0.8） and a high phase-change enthalpy （80J/g）.展开更多
Recently,Tongling Nonferrous Metals Group Co.,Ltd.issued its'Social Responsibility Report 2017'.In 2017,Tongling Nonferrous Metals actively responded to the grim and complicated international and domestic situ...Recently,Tongling Nonferrous Metals Group Co.,Ltd.issued its'Social Responsibility Report 2017'.In 2017,Tongling Nonferrous Metals actively responded to the grim and complicated international and domestic situations,and made every effort to overcome difficulties such as rising rigidity of production costs and increasing pressure on safety展开更多
基金Projects(ZR2018MEE005,ZR2018MEE016)supported by the Natural Science Foundation of Shandong Province,ChinaProject(J18KA059)supported by the Higher Educational Science and Technology Program of Shandong Province,ChinaProject(HJ16B01)supported by the Doctoral Fund of Yantai University,China。
文摘The effects of rare earth Ce on the microstructure and mechanical properties of impure copper containing Pb were investigated using OM,SEM,EPMA,TEM and tensile testing.TEM and EDS analysis reveal that spherical CePb3 particles form after Ce addition.CePb3 particles,with average size of^3.6μm,homogenously distribute in the Cu matrix.Due to small lattice misfit(~4.62%)with Cu matrix,CePb3 particles can act as effective nucleation sites beneficial to the grain refinement.Pb at grain boundaries seriously deteriorates the mechanical properties of Cu.The tensile strength and the elongation of Cu-0.1 Pb are decreased by 43.1%and 56.7%compared with those of pure copper,respectively.Ce can purify grain boundaries,cause the precipitation of CePb3 particles and refine grain sizes,which contribute to significant improvement of the mechanical properties of Cu.Compared with Cu-0.1Pb,the tensile strength(179 MPa)and the elongation(38.5%)of Cu-0.1Pb-0.3Ce are increased by 117.6%and 151.6%,respectively.
文摘Boro-germanate glasses containing copper, i.e., xCuO(1-x)[GeO2·B2O3] subjected to gamma irradiation, were studied by means of EPR. Comparisons were made with the xCuO·(1-x)[Na2B4O7] system. Irradiation induced centers were detected. These are: electron trapped at a hydrogen compensated germanium ion centers; boron oxygen hole centers and electron trapped at an oxygen vacancy centers. Strong dependence of the paramagnetic irradiation-induced centers concentration on the CuO content of the sample was evidenced.
基金[This work was financially supported by the National Natural Science Fund of China (No.59771067).]
文摘A Cu/Al galvanic couple was established to study the influence of the oxidantKMnO_4 on the film-forming process of rare earth metal (REM) conversion coating on LY12 aluminumalloy. It is found that the galvanic couple simulative experiment accords with the actual immersion,and it can be substantially used to simulate the behavior of LY12 aluminum alloy in thefilm-forming process. It is showed that the formation of the coating is quickened in CeCl_3 solutioncontaining KMnO_4 compared with that not containing KMnO_4. XPS results reveal that the coatingformed on cathode is composed of oxide or hydroxide of Ce and Mn, so the mechanism of formation ofREM conversion coating changes when KMnO4 is added.
文摘A copper coating was deposited by electroless plating on the surfaces of urea-formaldehyde microcap- sules containing paraffin （UFP） particles. This composite microcapsule structure had low infrared OR） emissivity and maintained a constant temperature, and could be used in IR stealth applications. The eiectroless copper layer formation and its micro-appearance, and the effect of the copper layer on the IR emissivity and thermal properties of the composite microcapsules were investigated. The IR emissivity of the composite microcapsules at wavelengths of 1-14 μm gradually decreased with increasing copper mass on the surface. After formation of an integrated copper layer, the rate of IR emissivity decrease was lower. This is because the copper coating improves the surface conductivity of the UFP; a high conductivity results in high reflectivity, which leads to a decrease in IR emissivity. The lowest IR emissivity achieved was 0.68. The phase-change enthalpy of the composite microcapsules decreased with increasing amount of copper coated on the surface because of the high density of copper. When the mass increase of the UFP after electroless copper plating was about 300%, the composite microcapsules had low IR emissivity （about 0.8） and a high phase-change enthalpy （80J/g）.
文摘Recently,Tongling Nonferrous Metals Group Co.,Ltd.issued its'Social Responsibility Report 2017'.In 2017,Tongling Nonferrous Metals actively responded to the grim and complicated international and domestic situations,and made every effort to overcome difficulties such as rising rigidity of production costs and increasing pressure on safety
