Flexible oxyethylene-ether was introduced into the aromatic copolyesters and copoly (ester-amide)s to reduce the melting point of resulting polymers. The melting point was greatly reduced to 200 degrees C or even lowe...Flexible oxyethylene-ether was introduced into the aromatic copolyesters and copoly (ester-amide)s to reduce the melting point of resulting polymers. The melting point was greatly reduced to 200 degrees C or even lower in some cases, and the molecular weight was satisfactorily high as reflected by inherent viscosity. The polymers exhibited high thermal stability and good mechanical properties as determined by TGA and mechanical tests. The copolyester showed better crystallinity and liquid crystallinity than corresponding copoly (ester-amide)s with similar monomer composition as reflected by POM observation and WAXD study. The melting points for both copolyesters and copoly (ester-amide)s showed great dependence on the p-acetoxybenzoic acid (PAB) content in monomer composition and reached the lowest value when PAB was 29 mol%.展开更多
Four novel copoly（ester-imide）s based on 3,3′,4,4′-biphenyltetracarboxylic dianhydride, bis（trimellitic acid anhydride） phenyl ester and di-p-aminophenyl ester of dicarboxylic acids were synthesized via two-step...Four novel copoly（ester-imide）s based on 3,3′,4,4′-biphenyltetracarboxylic dianhydride, bis（trimellitic acid anhydride） phenyl ester and di-p-aminophenyl ester of dicarboxylic acids were synthesized via two-step method in order to investigate whether two imide mesogenic units with different conformation and polarity could control the formation of LC-phase. Polarizes light microscopy （PLM） and differential scanning calorimetry （DSC） have shown that three polymers formed the nematic phase with ＂thread schlieren texture＂ and a polymer formed the nematic phase with ＂Inversion walls texture＂.展开更多
Various aspects of the rheological behaviour of liquid crystalline copolyesters, i.e.,samples of copoly (p-hydroxybenzoate / bisphenol A terephthalate), were explored by usingInstron capillary rheometer. The experimen...Various aspects of the rheological behaviour of liquid crystalline copolyesters, i.e.,samples of copoly (p-hydroxybenzoate / bisphenol A terephthalate), were explored by usingInstron capillary rheometer. The experimental results indicated that the apparent viscositywas affected significantly by shear rate, melt temperature and p-hydroxybenzoate unit con-tent. The flow activation energies △E_η are in the range of 205.1 to 74.5 kJ/mol, dependingon the shear rate of 10-1000 s^(-1), at temperature 568-603K. These copolyesters exhibit ayield phenomenon in the shear flow, and the values of yield stress decrease with increasingtemperature. It is quite unusual that the extrudate of the copolyester shows the smallerswelling ratio even than unity at the lower temperature and lower shear rates.展开更多
In this article,six new optically active copoly(amide-imide)s(10a-f) were synthesized through the direct polycondensation reaction of N-phthalimido-L-aspartic acid(4) with 1,5-diamino naphthalene(8),3,4-diamino benzop...In this article,six new optically active copoly(amide-imide)s(10a-f) were synthesized through the direct polycondensation reaction of N-phthalimido-L-aspartic acid(4) with 1,5-diamino naphthalene(8),3,4-diamino benzophenone(9) in the presence of therphthahc acid(7),fumaric acid(6) and adipic acid(5) as a second diacid in a medium consisting of N-methyl-2-pyrrolidone,triphenyl phosphite, calcium chloride and pyridine.The resulting copolymers were fully characterized by means of FT-IR spectroscopy,elemental a...展开更多
The permeability of copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane for twelve gases (0_2, N_2, CO_2, H_2, D_2, He, At, CH_4, C_2H_4, C_2H_6, C_3H_6 and C_3H_8) was examined. The basic laws o...The permeability of copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane for twelve gases (0_2, N_2, CO_2, H_2, D_2, He, At, CH_4, C_2H_4, C_2H_6, C_3H_6 and C_3H_8) was examined. The basic laws of solution and diffusion of the gases in the membrane were expounded preliminarily. It was found that a linear relationship between logarithm of diffusion coefficient (D) and critical molar volume (V_c) of the gases. The permeation characteristics of the gases in the copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane was also discussed.展开更多
A new series of copoly(ester-thioester)s had been synthesized using direct polycondensation technique. These copolythioesters were synthesized by direct polycondensation of 4,4'-(tereph-thaloyIdithio) diacetic aci...A new series of copoly(ester-thioester)s had been synthesized using direct polycondensation technique. These copolythioesters were synthesized by direct polycondensation of 4,4'-(tereph-thaloyIdithio) diacetic acid I, 3,3'(isophthaloyl-dithio) diacetic acid II, or 1,8 (sebacoyldithio) diacetic acid III, with 2,6-bis(p-hydroxybenzylidene) tert. butyl cyclohexanone IV and 2,6-divanyli-dene tert. butyl cyclohexanone V, using a condensing agent consisting of pyridine-thionyl clhloride complex. The resulting copolymers were characterized by elemental and spectral analyses, solubility, viscometery, electronic spectra and thermogravimietric analyses. The crystallinity of some copolymers was examined by X-ray diffraction analyses. Furthermore, the morphology of selec ted examples of the copolymers was examined by scanning electron microscopy.展开更多
The new approach for synthesis of hyperbranched polymers from commercially available A2 and BB'2 type monomers was extended to synthesize hyperbranched copolymers. In this work, hyperbranched copoly(sulfone-amine)...The new approach for synthesis of hyperbranched polymers from commercially available A2 and BB'2 type monomers was extended to synthesize hyperbranched copolymers. In this work, hyperbranched copoly(sulfone-amine) was prepared by copolymerization of divinyl sulfone (A2) with 4,4'-trimethylenedipiperidine (B2) and N-ethylethylenediamine (BB'2). During the reaction,secondary-amino groups of B2 and BB'2 monomers react rapidly with vinyl groups of A2 monomers within 35 s, generating a type of intermediate containing one vinyl group and two reactive hydrogen atoms. Now the intermediates can be regarded as a new BB2 type monomer, whichfurther polymerizes to form hyperbranched copoly(sulfone-amine). The polymerization mechanism was investigated with FTIR and LC-MSD. The degree of branching (DB) of hyperbranched copolymers increased with decreasing the ratio of 4, 4'-trimethylenedipiperidine to N-ethylethylenediamine, so DB can be controlled. When the initial mole ratio of B2 to BB2 was equal to or higher than four, r≥4, resulted copolymers were semi-crystalline, while copolymers with r<3 were amorphous.展开更多
Typically,conducting polymers transfer either electrons or holes.It is rare to see high bipolar(p-and n-type)electrical conductivities within a single bulk doped organic polymer without the assistant of gate voltage.H...Typically,conducting polymers transfer either electrons or holes.It is rare to see high bipolar(p-and n-type)electrical conductivities within a single bulk doped organic polymer without the assistant of gate voltage.Herein,we report that FeCl3-doped solutionprocessable D–A copolymer poly(2,5-bis(2-octyldo decyl)-3,6-di(thiophen-2-yl)diketopyrrolo[3,4-c]pyrrole-1,4-dione-alt-thieno[3,2-b]thiophen)(DPPTTT)could exhibit a high p-type electrical conductivity of 130.6 S/cm and a good n-type electrical conductivity of 14.2 S/cm by engineering the doping level.展开更多
基金This work was supported by the National Natural Science Foundation of China and the National Key Projects for Fundamental Research"Macromolecular Condensed State",The State Science and Technology Commission of China.
文摘Flexible oxyethylene-ether was introduced into the aromatic copolyesters and copoly (ester-amide)s to reduce the melting point of resulting polymers. The melting point was greatly reduced to 200 degrees C or even lower in some cases, and the molecular weight was satisfactorily high as reflected by inherent viscosity. The polymers exhibited high thermal stability and good mechanical properties as determined by TGA and mechanical tests. The copolyester showed better crystallinity and liquid crystallinity than corresponding copoly (ester-amide)s with similar monomer composition as reflected by POM observation and WAXD study. The melting points for both copolyesters and copoly (ester-amide)s showed great dependence on the p-acetoxybenzoic acid (PAB) content in monomer composition and reached the lowest value when PAB was 29 mol%.
基金supported by the National Science Foundation of China(No.50433010).
文摘Four novel copoly（ester-imide）s based on 3,3′,4,4′-biphenyltetracarboxylic dianhydride, bis（trimellitic acid anhydride） phenyl ester and di-p-aminophenyl ester of dicarboxylic acids were synthesized via two-step method in order to investigate whether two imide mesogenic units with different conformation and polarity could control the formation of LC-phase. Polarizes light microscopy （PLM） and differential scanning calorimetry （DSC） have shown that three polymers formed the nematic phase with ＂thread schlieren texture＂ and a polymer formed the nematic phase with ＂Inversion walls texture＂.
文摘Various aspects of the rheological behaviour of liquid crystalline copolyesters, i.e.,samples of copoly (p-hydroxybenzoate / bisphenol A terephthalate), were explored by usingInstron capillary rheometer. The experimental results indicated that the apparent viscositywas affected significantly by shear rate, melt temperature and p-hydroxybenzoate unit con-tent. The flow activation energies △E_η are in the range of 205.1 to 74.5 kJ/mol, dependingon the shear rate of 10-1000 s^(-1), at temperature 568-603K. These copolyesters exhibit ayield phenomenon in the shear flow, and the values of yield stress decrease with increasingtemperature. It is quite unusual that the extrudate of the copolyester shows the smallerswelling ratio even than unity at the lower temperature and lower shear rates.
文摘In this article,six new optically active copoly(amide-imide)s(10a-f) were synthesized through the direct polycondensation reaction of N-phthalimido-L-aspartic acid(4) with 1,5-diamino naphthalene(8),3,4-diamino benzophenone(9) in the presence of therphthahc acid(7),fumaric acid(6) and adipic acid(5) as a second diacid in a medium consisting of N-methyl-2-pyrrolidone,triphenyl phosphite, calcium chloride and pyridine.The resulting copolymers were fully characterized by means of FT-IR spectroscopy,elemental a...
文摘The permeability of copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane for twelve gases (0_2, N_2, CO_2, H_2, D_2, He, At, CH_4, C_2H_4, C_2H_6, C_3H_6 and C_3H_8) was examined. The basic laws of solution and diffusion of the gases in the membrane were expounded preliminarily. It was found that a linear relationship between logarithm of diffusion coefficient (D) and critical molar volume (V_c) of the gases. The permeation characteristics of the gases in the copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane was also discussed.
文摘A new series of copoly(ester-thioester)s had been synthesized using direct polycondensation technique. These copolythioesters were synthesized by direct polycondensation of 4,4'-(tereph-thaloyIdithio) diacetic acid I, 3,3'(isophthaloyl-dithio) diacetic acid II, or 1,8 (sebacoyldithio) diacetic acid III, with 2,6-bis(p-hydroxybenzylidene) tert. butyl cyclohexanone IV and 2,6-divanyli-dene tert. butyl cyclohexanone V, using a condensing agent consisting of pyridine-thionyl clhloride complex. The resulting copolymers were characterized by elemental and spectral analyses, solubility, viscometery, electronic spectra and thermogravimietric analyses. The crystallinity of some copolymers was examined by X-ray diffraction analyses. Furthermore, the morphology of selec ted examples of the copolymers was examined by scanning electron microscopy.
基金the National Natural Science Foundation of China (Grant No. 29974017).
文摘The new approach for synthesis of hyperbranched polymers from commercially available A2 and BB'2 type monomers was extended to synthesize hyperbranched copolymers. In this work, hyperbranched copoly(sulfone-amine) was prepared by copolymerization of divinyl sulfone (A2) with 4,4'-trimethylenedipiperidine (B2) and N-ethylethylenediamine (BB'2). During the reaction,secondary-amino groups of B2 and BB'2 monomers react rapidly with vinyl groups of A2 monomers within 35 s, generating a type of intermediate containing one vinyl group and two reactive hydrogen atoms. Now the intermediates can be regarded as a new BB2 type monomer, whichfurther polymerizes to form hyperbranched copoly(sulfone-amine). The polymerization mechanism was investigated with FTIR and LC-MSD. The degree of branching (DB) of hyperbranched copolymers increased with decreasing the ratio of 4, 4'-trimethylenedipiperidine to N-ethylethylenediamine, so DB can be controlled. When the initial mole ratio of B2 to BB2 was equal to or higher than four, r≥4, resulted copolymers were semi-crystalline, while copolymers with r<3 were amorphous.
基金support from the National Natural Science Foundation of China(grant no.51876151)the Fundamental Research Funds for the Central Universities,the World-Class Universities(Disciplines)+1 种基金the Characteristic Development Guidance Funds for the Central Universities(grant no.PY3A010)and the start-up funding from Xi’an Jiaotong University(grant no.QY1J003)the HPC platform and the Instrument Analysis Center,Xi’an Jiaotong University.
文摘Typically,conducting polymers transfer either electrons or holes.It is rare to see high bipolar(p-and n-type)electrical conductivities within a single bulk doped organic polymer without the assistant of gate voltage.Herein,we report that FeCl3-doped solutionprocessable D–A copolymer poly(2,5-bis(2-octyldo decyl)-3,6-di(thiophen-2-yl)diketopyrrolo[3,4-c]pyrrole-1,4-dione-alt-thieno[3,2-b]thiophen)(DPPTTT)could exhibit a high p-type electrical conductivity of 130.6 S/cm and a good n-type electrical conductivity of 14.2 S/cm by engineering the doping level.
