We introduce an asymmetrical mirror design to a 140 GHz TE_（22,6） quasi-optical（QO） mode converter system to correct the asymmetry of the beam＇s field distribution caused by the Denisov launcher. By such optimiza...We introduce an asymmetrical mirror design to a 140 GHz TE_（22,6） quasi-optical（QO） mode converter system to correct the asymmetry of the beam＇s field distribution caused by the Denisov launcher. By such optimization, the output beam with better symmetrical distribution is obtained at the system＇s output window. Based on the calculated results,the QO mode converter system＇s performance is already satisfying without iterative phase correction. Scalar and vector correlation coefficients between the output beam and the fundamental Gaussian beam are respectively 98.4% and 93.0%,while the total power transmission efficiency of the converter system is 94.4%. The assistance of optical ray tracing to the design of such QO mode converters is introduced and discussed as well.展开更多
A design of the main AC/DC converter system for ITER is described and the configuration of the main AC/DC converters is presented. To reduce the reactive power absorbed from the converter units, the main AC/DC convert...A design of the main AC/DC converter system for ITER is described and the configuration of the main AC/DC converters is presented. To reduce the reactive power absorbed from the converter units, the main AC/DC converters are designed to be series-connected and work in a sequential mode. The structure of the regulator of the converter system is described. A simulation model was built up for the PSCAD/EMTDC code, and the design was validated accordingly. Harmonic analysis and reactive power calculation of the converters units are presented. The results reveal the advantage of sequential control in reducing reactive power and harmonics.展开更多
The integrated system composed of wave energy converters and floating wind turbines offers substantial potential for reducing the levelized cost of energy(LCOE) by sharing the infrastructure, mooring system, substatio...The integrated system composed of wave energy converters and floating wind turbines offers substantial potential for reducing the levelized cost of energy(LCOE) by sharing the infrastructure, mooring system, substations and cables.This paper proposes an integrated system consisting of a semi-submersible wind turbine platform and three Wave Star flap-type wave energy converters. The coupled motion model of the integrated system is established and validated on the basis of viscously corrected potential flow theory. This study investigates the influence of two key parameters,the arm length and hinge points of flap-type wave energy converters, on system performance. The results reveal that variations in the arm length of flap-type wave energy converters(WECs) are the primary determinants of the integrated system's dynamic characteristics, whereas changes in hinge points predominantly affect device power generation.Additionally, incorporating WECs reduces the pitch and heave motions of the platform within a specific wave frequency range, thereby enhancing the energy output of the integrated system at the operational sea site. The performance of this hybrid system at a selected sea site is further assessed via the proposed aero-hydroservo coupling simulations.展开更多
Installing annular wave-energy converters(WECs)on the columns of floating wind platforms in the form of a coaxial-cylinder provides a convenient means of integration.Extant coaxial-cylinder-type wind-wave hybrid syste...Installing annular wave-energy converters(WECs)on the columns of floating wind platforms in the form of a coaxial-cylinder provides a convenient means of integration.Extant coaxial-cylinder-type wind-wave hybrid systems are mostly based on single-column platforms such as spars(single coaxial-cylinder hybrid system'hereafter).Systems based on multiple-column platforms such as semi-submersible platforms('multiple coaxial-cylinder hybrid systems'hereafter)are rarely seen or studied,despite their superiority in wave-power absorption due to the use of multiple WECs as well as in dynamic stability.This paper proposes a novel WindFloat-annular-WEC hybrid system,based on our study investigating its dynamic and power features,and optimizing the geometry and power take-off of the WECs.Our results show that the dynamic and power features of a multiple coaxial-cylinder hybrid system are different from those of a single coaxial-cylinder hybrid system,so the same optimization parameters cannot be directly applied.Flatter annular WECs absorb slightly more power in a wider wave-period range,but their geometry is confined by limitations in installation and structural strength.The overall effect of an oblique incident wave is greater intensity in the motions of the hybrid system in yaw and the direction perpendicular to propagation,although the difference is small and maybe negligible.展开更多
In this work,an oscillating-body wave energy converter(OBWEC)with a hydraulic power take-off(PTO)system named“Dolphin 1”is designed,in which the hydraulic PTO system is equivalent to a transfer station and plays a c...In this work,an oscillating-body wave energy converter(OBWEC)with a hydraulic power take-off(PTO)system named“Dolphin 1”is designed,in which the hydraulic PTO system is equivalent to a transfer station and plays a crucial role in ensuring the stability of the electrical energy output and the efficiency of the overall system.A corresponding mathematical model for the hydraulic PTO system has been established,the factors that influence its performance have been studied,and an algorithm for solving the optimal working pressure has been derived in this paper.Moreover,a PID control method to enable the hydraulic PTO system to automatically achieve optimal performance under different wave conditions has been designed.The results indicate that,compared with single-chamber hydraulic cylinders,double-chamber hydraulic cylinders have a wider application range and greater performance;the accumulator can stabilize the output power of the hydraulic PTO system and slightly increase it;excessively large or small hydraulic motor displacement hinders system performance;and each wave condition corresponds to a unique optimal working pressure for the hydraulic PTO system.In addition,the relationship between the optimal working pressure P_(m)and the pressure P_(h)of the wave force acting on the piston satisfies P_(m)^(2)=∫_(t_(1))^(t_(2))P_(h)^(2)dt/(t_(2)-t_(1)).Furthermore,adjusting the hydraulic motor displacement automatically via a PID controller ensures that the actual working pressure of the hydraulic PTO system consistently reaches or approaches its theoretically optimal value under various wave conditions,which is a very effective control method for enhancing the performance of the hydraulic PTO system.展开更多
With the rapid integration of renewable energy sources,modern power systems are increasingly challenged by heightened volatility and uncertainty.Doubly-fed variable-speed pumped storage units(DFVS-PSUs)have emerged as...With the rapid integration of renewable energy sources,modern power systems are increasingly challenged by heightened volatility and uncertainty.Doubly-fed variable-speed pumped storage units(DFVS-PSUs)have emerged as promising technologies for mitigating grid oscillations and enhancing system flexibility.However,the excitation converters in DFVS-PSUs are prone to significant issues such as elevated common-mode voltage(CMV)and neutral-point voltage(NPV)fluctuations,which can lead to electromagnetic interference and degrade transient performance.To address these challenges,an optimized virtual space vector pulse width modulation(OVSVPWM)strategy is proposed,aiming to suppress CMV and NPV simultaneously through coordinated multi-objective control.Specifically,a dynamic feedback mechanism is introduced to adjust the balancing factor of basic vectors in the synthesized virtual small vector in real-time,achieving autonomous balancing of the NPV.To address the excessive switching actions introduced by the OVSVPWM strategy,a phase duty ratio-based sequence reconstruction method is adopted,which reduces the total number of switching actions to half of the original.A zero-level buffering scheme is employed to reconstruct the single-phase voltage-level output sequence,achieving peak CMV suppression down to udc/6.Simulation results demonstrate that the proposed strategy significantly improves electromagnetic compatibility and operational stability while maintaining high power quality.展开更多
The dynamics of diverse synchronization control,such as grid-following(GFL)and grid-forming(GFM)control,are complicating the oscillatory behaviors in multi-converter systems.In this context,the impedance network(IN)ba...The dynamics of diverse synchronization control,such as grid-following(GFL)and grid-forming(GFM)control,are complicating the oscillatory behaviors in multi-converter systems.In this context,the impedance network(IN)based frequency-domain modal analysis(FMA)method is useful for diagnosing oscillations.However,since the conventional impedance model retains only electric nodes,the FMA primarily reflects the circuit-related information,e.g.,node participation factor,making it less intuitive for probing the synchronous dynamics.To address this issue,this paper proposes an augmented impedance network(AIN)modeling method by explicitly characterizing synchronous control loops for stability assessment.First,a four-port augmented impedance model(AIM)with an additional synchronization port is proposed for a generic AC/DC converter,and the corresponding AIN model of a generic AC/DC multi-converter system is formulated in a scalable approach.Then,the FMA method is generalized by simultaneously incorporating the electric nodes(including AC and DC nodes)and synchronous nodes.Finally,the AIN model and its associated FMA method are comprehensively validated in a typical point-to-point high-voltage direct current(HVDC)system and a modified IEEE 9-bus system,both with GFM and GFL converters.展开更多
Fractional-order control(FOC)has gained significant attention in power system applications due to their ability to enhance performance and increase stability margins.In grid-connected converter(GCC)systems,the synchro...Fractional-order control(FOC)has gained significant attention in power system applications due to their ability to enhance performance and increase stability margins.In grid-connected converter(GCC)systems,the synchronous reference frame phase-locked loop(SRF-PLL)plays a critical role in grid synchronization for renewable power generation.However,there is a notable research gap regarding the application of FOC to the SRF-PLL.This paper proposes a fractional-order SRF-PLL(FO-SRF-PLL)that incorporates FOC to accurately track the phase angle of the terminal voltage,thereby improving the efficiency of grid-connected control.The dynamic performance of the proposed FO-SRF-PLL is evaluated under varying grid conditions.A comprehensive analysis of the small-signal stability of the GCC system employing the FO-SRF-PLL is also presented,including derived small-signal stability conditions.The results demonstrate that the FO-SRF-PLL significantly enhances robustness against disturbances compared with the conventional SRF-PLL.Furthermore,the GCC system with the FO-SRF-PLL maintains stability even under weak grid conditions,showing superior stability performance over the SRF-PLL.Finally,both simulation and experimental results are provided to validate the analysis and conclusions presented in this paper.展开更多
The world’s first hybrid commutated converter(HCC)—a next-generation high-voltage direct current(HVDC)transmission valve based on integrated gate commutated thyristor(IGCT)technology—officially commenced commercial...The world’s first hybrid commutated converter(HCC)—a next-generation high-voltage direct current(HVDC)transmission valve based on integrated gate commutated thyristor(IGCT)technology—officially commenced commercial operation at the Lingbao Converter Station in Henan Province,China,on December 28,2025,as shown in Figure 1.This milestone signifies the resolution of the“commutation failure”challenge that has plagued global HVDC transmission systems for over half a century.展开更多
To enhance power flow regulation in scenarios involving large-scale renewable energy transmission via high-voltage direct current(HVDC)links and multi-infeed DC systems in load-center regions,this paper proposes a hyb...To enhance power flow regulation in scenarios involving large-scale renewable energy transmission via high-voltage direct current(HVDC)links and multi-infeed DC systems in load-center regions,this paper proposes a hybrid modular multilevel converter–capacitor-commutated line-commutated converter(MMC-CLCC)HVDC transmission system and its corresponding control strategy.First,the system topology is constructed,and a submodule configuration method for the MMC—combining full-bridge submodules(FBSMs)and half-bridge submodules(HBSMs)—is proposed to enable direct power flow reversal.Second,a hierarchical control strategy is introduced,includingMMCvoltage control,CLCC current control,and a coordinationmechanism,along with the derivation of the hybrid system’s power flow reversal characteristics.Third,leveraging the CLCC’s fast current regulation and theMMC’s negative voltage control capability,a coordinated power flow reversal control strategy is developed.Finally,an 800 kV MMC-CLCC hybrid HVDC system is modeled in PSCAD/EMTDC to validate the power flow reversal performance under a high proportion of full-bridge submodule configuration.Results demonstrate that the proposed control strategy enables rapid(1-s transition)and smooth switching of bidirectional power flow without modifying the structure of primary equipment:the transient fluctuation ofDC voltage from the rated value(UdcN)to themaximumreverse voltage(-kUdcN)is less than 5%;the DC current strictly follows the preset characteristic curve with a deviation of≤3%;the active power reverses continuously,and the system maintains stable operation throughout the reversal process.展开更多
Grid-Forming(GFM)converters are prone to fault-induced overcurrent and power angle instability during grid fault-induced voltage sags.To address this,this paper develops a multi-loop coordinated fault ridethrough(FRT)...Grid-Forming(GFM)converters are prone to fault-induced overcurrent and power angle instability during grid fault-induced voltage sags.To address this,this paper develops a multi-loop coordinated fault ridethrough(FRT)control strategy based on a power outer loop and voltage-current inner loops,aiming to enhance the stability and current-limiting capability of GFM converters during grid fault conditions.During voltage sags,the GFM converter’s voltage source behavior is maintained by dynamically adjusting the reactive power reference to provide voltage support,thereby effectively suppressing the steady-state component of the fault current.To address the active power imbalance induced by voltage sags,a dynamic active power reference correction method based on apparent power is designed to mitigate power angle oscillations and limit transient current.Moreover,an adaptive virtual impedance loop is implemented to enhance dynamic transient current-limiting performance during the fault initiation phase.This approach improves the responsiveness of the inner loop and ensures safe system operation under various fault severities.Under asymmetric fault conditions,a negative-sequence reactive current compensation strategy is incorporated to further suppress negative-sequence voltage and improve voltage symmetry.The proposed control scheme enables coordinated operation of multiple control objectives,including voltage support,current suppression,and power angle stability,across different fault scenarios.Finally,MATLAB/Simulink simulation results validate the effectiveness of the proposed strategy,showcasing its superior performance in current limiting and power angle stability,thereby significantly enhancing the system’s fault ride-through capability.展开更多
In order to solve the problems of slow dynamic response and difficult multi-source coordination of solar electric vehicle charging stations under intermittent renewable energy,this paper proposes a hardware-algorithm ...In order to solve the problems of slow dynamic response and difficult multi-source coordination of solar electric vehicle charging stations under intermittent renewable energy,this paper proposes a hardware-algorithm co-design framework:the T-type three-level bidirectional converter(100 kHz switching frequency)based on silicon carbide(SiC)MOSFET is deeply integrated with fuzzy model predictive control(Fuzzy-MPC).At the hardware level,the switching trajectory and resonance suppression circuit(attenuation resonance peak 18 dB)are optimized,and the total loss is reduced by 23%compared with the traditional silicon-based IGBT.At the algorithm level,the adaptive parameter update mechanism and multi-objective rolling optimization are adopted,and the 5 ms level dynamic power allocation is realized by relying on edge computing.Experiments on 800 V DC microgrid(including 600 kW photovoltaic and 150 A·h energy storage)built based on MATLAB/Simulink hardware-in-the-loop(HIL)platform show that the system shortens the battery charging time from 42 to 28 min(the charging speed is increased by 33%).Through the 78%valley power utilization rate,the power purchase cost of high-priced power grids was significantly reduced,and the levelized electricity price decreased by 10.3%;Under the irradiation fluctuation,the renewable energy consumption rate increases by 10.1%,and the DC bus voltage fluctuation is stable within±10 V when the load step is±30%.The co-design provides an economically feasible and dynamically robust solution for the efficient integration of PV-ESG-EV in the smart grid.展开更多
In wind power transmission via modular multilevel converter based high voltage direct current(MMCHVDC)systems,under traditional control strategies,MMC-HVDCcannot provide inertia support to the receiving-end grid(REG)d...In wind power transmission via modular multilevel converter based high voltage direct current(MMCHVDC)systems,under traditional control strategies,MMC-HVDCcannot provide inertia support to the receiving-end grid(REG)during disturbances.Moreover,due to the frequency decoupling between the two ends of the MMCHVDC,the sending-end wind farm(SEWF)cannot obtain the frequency variation information of the REG to provide inertia response.Therefore,this paper proposes a novel coordinated source-network-storage inertia control strategy based on wind power transmission via MMC-HVDC system.First,the grid-side MMC station(GS-MMC)maps the frequency variations of the REG to direct current(DC)voltage variations through the frequency mapping control,and uses submodule capacitor energy to provide inertial power.Then,the wind farm-side MMC station(WF-MMC)restores the DC voltage variations to frequency variations through the frequency restoration control and power loss compensation,providing real-time frequency information for the wind farm.Finally,based on real-time frequency information,thewind farmutilizes the rotor kinetic energy and energy storage to provide fast and lasting power support through the wind-storage coordinated inertia control strategy.Meanwhile,when the wind turbines withdraw from the inertia response phase,the energy storage can increase the power output to compensate for the power deficit,preventing secondary frequency drops.Furthermore,this paper uses small-signal analysis to determine the appropriate values for the key parameters of the proposed control strategy.A simulation model of the wind power transmission via MMCHVDC system is built in MATLAB/Simulink environment to validate and evaluate the proposed method.The results show that the proposed coordinated control strategy can effectively improve the system inertia level and avoid the secondary frequency drop under the load sudden increase condition.展开更多
To address the issue of abnormal energy consumption fluctuations in the converter steelmaking process,an integrated diagnostic method combining the gray wolf optimization(GWO)algorithm,support vector machine(SVM),and ...To address the issue of abnormal energy consumption fluctuations in the converter steelmaking process,an integrated diagnostic method combining the gray wolf optimization(GWO)algorithm,support vector machine(SVM),and K-means clustering was proposed.Eight input parameters—derived from molten iron conditions and external factors—were selected as feature variables.A GWO-SVM model was developed to accurately predict the energy consumption of individual heats.Based on the prediction results,the mean absolute percentage error and maximum relative error of the test set were employed as criteria to identify heats with abnormal energy usage.For these heats,the K-means clustering algorithm was used to determine benchmark values of influencing factors from similar steel grades,enabling root-cause diagnosis of excessive energy consumption.The proposed method was applied to real production data from a converter in a steel plant.The analysis reveals that heat sample No.44 exhibits abnormal energy consumption,due to gas recovery being 1430.28 kg of standard coal below the benchmark level.A secondary contributing factor is a steam recovery shortfall of 237.99 kg of standard coal.This integrated approach offers a scientifically grounded tool for energy management in converter operations and provides valuable guidance for optimizing process parameters and enhancing energy efficiency.展开更多
To analyze the thermodynamic characteristics of leaching process of converter slag, φ-pH diagram of V-Ti-H2O system at oxygen partial pressure of 0.5 MPa, ionic mass concentration of 0.1 mol/kg and temperatures rangi...To analyze the thermodynamic characteristics of leaching process of converter slag, φ-pH diagram of V-Ti-H2O system at oxygen partial pressure of 0.5 MPa, ionic mass concentration of 0.1 mol/kg and temperatures ranging from 60 to 200 ℃ was obtained by recently published critically assessed standard Gibbs energies and activity coefficients of various species. When pH2, stable regions of V3＋, VO2＋ and VO2＋ exist in the stable region of TiO2. The pH values of stable regions of vanadium and titanium decrease and redox potentials become more positive with the temperature increasing. Vanadium and titanium could be separated by one-step leaching based on thermodynamics. The experiment results of pressure acid leaching of converter slag show that leaching rates of vanadium and titanium are 96.87% and 8.76% respectively, at 140 ℃ of temperature, 0.5 MPa of oxygen partial pressure, 0.055-0.075mm of particle size, 15：1 of liquid to solid ratio, 120 min of leaching time, 500 r/min of stirring speed and 200 g/L of initial acid concentration. Vanadium and titanium could be selectively separated in the pressure acid leaching process, and the experiment result is in agreement with thermodynamic calculation result.展开更多
This paper proposes an optimized and coordinated model predictive control(MPC) scheme for doublyfed induction generators(DFIGs) with DC-based converter system to improve the efficiency and dynamic performance in DC gr...This paper proposes an optimized and coordinated model predictive control(MPC) scheme for doublyfed induction generators(DFIGs) with DC-based converter system to improve the efficiency and dynamic performance in DC grids. In this configuration, the stator and rotor of the DFIG are connected to the DC bus via voltage source converters, namely, a rotor side converter(RSC) and a stator side converter(SSC). Optimized trajectories for rotorflux and stator current are proposed to minimize Joule losses of the DFIG, which is particularly advantageous at low and moderate torque. The coordinated MPC scheme is applied to overcome the weaknesses of the field-oriented control technique in the rotor flux-oriented frame, which makes the rotor flux stable and the stator current track its reference closely and quickly. Lastly, simulations and experiments are carried out to validate the feasibility of the control scheme and to analyze the steady-state and dynamic performance of the DFIG.展开更多
This paper presents a 2GS/s 10bit CMOS digital-to-analog converter （DAC） that consists of two unit current-cell matrixes for 6MSBs and 4LSBs, respectively, trading off between the precision and size of the chip. Cur...This paper presents a 2GS/s 10bit CMOS digital-to-analog converter （DAC） that consists of two unit current-cell matrixes for 6MSBs and 4LSBs, respectively, trading off between the precision and size of the chip. Current mode logic （CML） is used to ensure high speed,and a double centro-symmetric current matrix is designed by the Q^2 random walk strategy in order to ensure the linearity of the DAC. The DAC occupies 2.2mm × 2.2mm of die area and consumes 790mW with a single 3.3V power supply.展开更多
Among the wave energy converters (WECs), oscillating buoy is a promising type for wave energy development in offshore area. Conventional single-freedom oscillating buoy WECs with linear power take-off (PTO) system are...Among the wave energy converters (WECs), oscillating buoy is a promising type for wave energy development in offshore area. Conventional single-freedom oscillating buoy WECs with linear power take-off (PTO) system are less efficient under off-resonance conditions and have a narrow power capture bandwidth. Thus, a multi-freedom WEC with a nonlinear PTO system is proposed. This study examines a multi-freedom WEC with 3 degrees of freedom: surge, heave and pitch. Three different PTO systems (velocity-square, snap through, and constant PTO systems) and a traditional linear PTO system are applied to the WEC. A time-domain model is established using linear potential theory and Cummins equation. The kinematic equation is numerically calculated with the fourth-order Runge–Kutta method. The optimal average output power of the PTO systems in all degrees of freedom are obtained and compared. Other parameters of snap through PTO are also discussed in detail. Results show that according to the power capture performance, the order of the PTO systems from the best to worst is snap through PTO, constant PTO, linear PTO and velocity-square PTO. The resonant frequency of the WEC can be adjusted to the incident wave frequency by choosing specific parameters of the snap through PTO. Adding more DOFs can make the WEC get a better power performance in more wave frequencies. Both the above two methods can raise the WEC’s power capture performance significantly.展开更多
The multi-string LED in parallel is a popular structure in backlight and lighting applications.The current balancing for each string is required to achieve uniform luminance and reliable operation.The conventional act...The multi-string LED in parallel is a popular structure in backlight and lighting applications.The current balancing for each string is required to achieve uniform luminance and reliable operation.The conventional active current sharing technique using a switching converter or a linear switch is very complex,and needs extra components.The conventional coupled inductor based current sharing method is much more simple,but needs too many coupled inductors.展开更多
A 3D torque converter design system is developed based on numerical investigation into flow field and CAD technology. The 3D steady-state flow field simulation is undertaken by using time averaged Reynolds equation an...A 3D torque converter design system is developed based on numerical investigation into flow field and CAD technology. The 3D steady-state flow field simulation is undertaken by using time averaged Reynolds equation and k-epsilon turbulence model, with mixing-plane boundary conditions at three section interfaces. The blades are designed according to the flow field characteristics by using a reverse design method in the system. The accurateness of numerical analysis and the validity of design system are verified by the fluid field experiment of desingn example of the torque converter. This kind of design and analysis system for torque converter based on integration of comput ationol fluid dynamics （CFD） and CAD is a powerful tool for torque converter manufacturing, but also a prettg important significance for research and development.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.61671032)
文摘We introduce an asymmetrical mirror design to a 140 GHz TE_（22,6） quasi-optical（QO） mode converter system to correct the asymmetry of the beam＇s field distribution caused by the Denisov launcher. By such optimization, the output beam with better symmetrical distribution is obtained at the system＇s output window. Based on the calculated results,the QO mode converter system＇s performance is already satisfying without iterative phase correction. Scalar and vector correlation coefficients between the output beam and the fundamental Gaussian beam are respectively 98.4% and 93.0%,while the total power transmission efficiency of the converter system is 94.4%. The assistance of optical ray tracing to the design of such QO mode converters is introduced and discussed as well.
文摘A design of the main AC/DC converter system for ITER is described and the configuration of the main AC/DC converters is presented. To reduce the reactive power absorbed from the converter units, the main AC/DC converters are designed to be series-connected and work in a sequential mode. The structure of the regulator of the converter system is described. A simulation model was built up for the PSCAD/EMTDC code, and the design was validated accordingly. Harmonic analysis and reactive power calculation of the converters units are presented. The results reveal the advantage of sequential control in reducing reactive power and harmonics.
基金financially supported by the National Natural Science Foundation of China National Outstanding Youth Science Fund Project (Grant No. 52222109)the National Natural Science Foundation of China (Grant No. 52201322)+1 种基金Guangdong Basic and Applied Basic Research Foundation (Grant Nos. 2024A1515240006, 2022B1515020036 and 2023A1515012144)the Project of State Key Laboratory of Subtropical Building and Urban Science (Grant No. 2023ZB14)。
文摘The integrated system composed of wave energy converters and floating wind turbines offers substantial potential for reducing the levelized cost of energy(LCOE) by sharing the infrastructure, mooring system, substations and cables.This paper proposes an integrated system consisting of a semi-submersible wind turbine platform and three Wave Star flap-type wave energy converters. The coupled motion model of the integrated system is established and validated on the basis of viscously corrected potential flow theory. This study investigates the influence of two key parameters,the arm length and hinge points of flap-type wave energy converters, on system performance. The results reveal that variations in the arm length of flap-type wave energy converters(WECs) are the primary determinants of the integrated system's dynamic characteristics, whereas changes in hinge points predominantly affect device power generation.Additionally, incorporating WECs reduces the pitch and heave motions of the platform within a specific wave frequency range, thereby enhancing the energy output of the integrated system at the operational sea site. The performance of this hybrid system at a selected sea site is further assessed via the proposed aero-hydroservo coupling simulations.
基金supported by the National Natural Science Foundation of China(Nos.52201322,52222109,and 52071096)the Guangdong Basic and Applied Basic Research Foundation(Nos.2022B1515020036 and 2023A1515012144)the Natural Science Foundation of Guangzhou City(No.202201010055),China.
文摘Installing annular wave-energy converters(WECs)on the columns of floating wind platforms in the form of a coaxial-cylinder provides a convenient means of integration.Extant coaxial-cylinder-type wind-wave hybrid systems are mostly based on single-column platforms such as spars(single coaxial-cylinder hybrid system'hereafter).Systems based on multiple-column platforms such as semi-submersible platforms('multiple coaxial-cylinder hybrid systems'hereafter)are rarely seen or studied,despite their superiority in wave-power absorption due to the use of multiple WECs as well as in dynamic stability.This paper proposes a novel WindFloat-annular-WEC hybrid system,based on our study investigating its dynamic and power features,and optimizing the geometry and power take-off of the WECs.Our results show that the dynamic and power features of a multiple coaxial-cylinder hybrid system are different from those of a single coaxial-cylinder hybrid system,so the same optimization parameters cannot be directly applied.Flatter annular WECs absorb slightly more power in a wider wave-period range,but their geometry is confined by limitations in installation and structural strength.The overall effect of an oblique incident wave is greater intensity in the motions of the hybrid system in yaw and the direction perpendicular to propagation,although the difference is small and maybe negligible.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52071094 and 51979065).
文摘In this work,an oscillating-body wave energy converter(OBWEC)with a hydraulic power take-off(PTO)system named“Dolphin 1”is designed,in which the hydraulic PTO system is equivalent to a transfer station and plays a crucial role in ensuring the stability of the electrical energy output and the efficiency of the overall system.A corresponding mathematical model for the hydraulic PTO system has been established,the factors that influence its performance have been studied,and an algorithm for solving the optimal working pressure has been derived in this paper.Moreover,a PID control method to enable the hydraulic PTO system to automatically achieve optimal performance under different wave conditions has been designed.The results indicate that,compared with single-chamber hydraulic cylinders,double-chamber hydraulic cylinders have a wider application range and greater performance;the accumulator can stabilize the output power of the hydraulic PTO system and slightly increase it;excessively large or small hydraulic motor displacement hinders system performance;and each wave condition corresponds to a unique optimal working pressure for the hydraulic PTO system.In addition,the relationship between the optimal working pressure P_(m)and the pressure P_(h)of the wave force acting on the piston satisfies P_(m)^(2)=∫_(t_(1))^(t_(2))P_(h)^(2)dt/(t_(2)-t_(1)).Furthermore,adjusting the hydraulic motor displacement automatically via a PID controller ensures that the actual working pressure of the hydraulic PTO system consistently reaches or approaches its theoretically optimal value under various wave conditions,which is a very effective control method for enhancing the performance of the hydraulic PTO system.
文摘With the rapid integration of renewable energy sources,modern power systems are increasingly challenged by heightened volatility and uncertainty.Doubly-fed variable-speed pumped storage units(DFVS-PSUs)have emerged as promising technologies for mitigating grid oscillations and enhancing system flexibility.However,the excitation converters in DFVS-PSUs are prone to significant issues such as elevated common-mode voltage(CMV)and neutral-point voltage(NPV)fluctuations,which can lead to electromagnetic interference and degrade transient performance.To address these challenges,an optimized virtual space vector pulse width modulation(OVSVPWM)strategy is proposed,aiming to suppress CMV and NPV simultaneously through coordinated multi-objective control.Specifically,a dynamic feedback mechanism is introduced to adjust the balancing factor of basic vectors in the synthesized virtual small vector in real-time,achieving autonomous balancing of the NPV.To address the excessive switching actions introduced by the OVSVPWM strategy,a phase duty ratio-based sequence reconstruction method is adopted,which reduces the total number of switching actions to half of the original.A zero-level buffering scheme is employed to reconstruct the single-phase voltage-level output sequence,achieving peak CMV suppression down to udc/6.Simulation results demonstrate that the proposed strategy significantly improves electromagnetic compatibility and operational stability while maintaining high power quality.
基金supported by National Natural Science Foundation of China(No.52207215)the Delta Power Electronics Science and Education Development Program of Delta Group(No.DREK2023004).
文摘The dynamics of diverse synchronization control,such as grid-following(GFL)and grid-forming(GFM)control,are complicating the oscillatory behaviors in multi-converter systems.In this context,the impedance network(IN)based frequency-domain modal analysis(FMA)method is useful for diagnosing oscillations.However,since the conventional impedance model retains only electric nodes,the FMA primarily reflects the circuit-related information,e.g.,node participation factor,making it less intuitive for probing the synchronous dynamics.To address this issue,this paper proposes an augmented impedance network(AIN)modeling method by explicitly characterizing synchronous control loops for stability assessment.First,a four-port augmented impedance model(AIM)with an additional synchronization port is proposed for a generic AC/DC converter,and the corresponding AIN model of a generic AC/DC multi-converter system is formulated in a scalable approach.Then,the FMA method is generalized by simultaneously incorporating the electric nodes(including AC and DC nodes)and synchronous nodes.Finally,the AIN model and its associated FMA method are comprehensively validated in a typical point-to-point high-voltage direct current(HVDC)system and a modified IEEE 9-bus system,both with GFM and GFL converters.
基金supported in part by the Natural Science Foundation of China(No.52077144)the Youth Innovative Research Team of Science and Technology Scheme,Sichuan Province,China(No.22CXTD0066).
文摘Fractional-order control(FOC)has gained significant attention in power system applications due to their ability to enhance performance and increase stability margins.In grid-connected converter(GCC)systems,the synchronous reference frame phase-locked loop(SRF-PLL)plays a critical role in grid synchronization for renewable power generation.However,there is a notable research gap regarding the application of FOC to the SRF-PLL.This paper proposes a fractional-order SRF-PLL(FO-SRF-PLL)that incorporates FOC to accurately track the phase angle of the terminal voltage,thereby improving the efficiency of grid-connected control.The dynamic performance of the proposed FO-SRF-PLL is evaluated under varying grid conditions.A comprehensive analysis of the small-signal stability of the GCC system employing the FO-SRF-PLL is also presented,including derived small-signal stability conditions.The results demonstrate that the FO-SRF-PLL significantly enhances robustness against disturbances compared with the conventional SRF-PLL.Furthermore,the GCC system with the FO-SRF-PLL maintains stability even under weak grid conditions,showing superior stability performance over the SRF-PLL.Finally,both simulation and experimental results are provided to validate the analysis and conclusions presented in this paper.
文摘The world’s first hybrid commutated converter(HCC)—a next-generation high-voltage direct current(HVDC)transmission valve based on integrated gate commutated thyristor(IGCT)technology—officially commenced commercial operation at the Lingbao Converter Station in Henan Province,China,on December 28,2025,as shown in Figure 1.This milestone signifies the resolution of the“commutation failure”challenge that has plagued global HVDC transmission systems for over half a century.
基金supported by Science and Technology Project of the headquarters of the State Grid Corporation of China(No.5500-202324492A-3-2-ZN).
文摘To enhance power flow regulation in scenarios involving large-scale renewable energy transmission via high-voltage direct current(HVDC)links and multi-infeed DC systems in load-center regions,this paper proposes a hybrid modular multilevel converter–capacitor-commutated line-commutated converter(MMC-CLCC)HVDC transmission system and its corresponding control strategy.First,the system topology is constructed,and a submodule configuration method for the MMC—combining full-bridge submodules(FBSMs)and half-bridge submodules(HBSMs)—is proposed to enable direct power flow reversal.Second,a hierarchical control strategy is introduced,includingMMCvoltage control,CLCC current control,and a coordinationmechanism,along with the derivation of the hybrid system’s power flow reversal characteristics.Third,leveraging the CLCC’s fast current regulation and theMMC’s negative voltage control capability,a coordinated power flow reversal control strategy is developed.Finally,an 800 kV MMC-CLCC hybrid HVDC system is modeled in PSCAD/EMTDC to validate the power flow reversal performance under a high proportion of full-bridge submodule configuration.Results demonstrate that the proposed control strategy enables rapid(1-s transition)and smooth switching of bidirectional power flow without modifying the structure of primary equipment:the transient fluctuation ofDC voltage from the rated value(UdcN)to themaximumreverse voltage(-kUdcN)is less than 5%;the DC current strictly follows the preset characteristic curve with a deviation of≤3%;the active power reverses continuously,and the system maintains stable operation throughout the reversal process.
文摘Grid-Forming(GFM)converters are prone to fault-induced overcurrent and power angle instability during grid fault-induced voltage sags.To address this,this paper develops a multi-loop coordinated fault ridethrough(FRT)control strategy based on a power outer loop and voltage-current inner loops,aiming to enhance the stability and current-limiting capability of GFM converters during grid fault conditions.During voltage sags,the GFM converter’s voltage source behavior is maintained by dynamically adjusting the reactive power reference to provide voltage support,thereby effectively suppressing the steady-state component of the fault current.To address the active power imbalance induced by voltage sags,a dynamic active power reference correction method based on apparent power is designed to mitigate power angle oscillations and limit transient current.Moreover,an adaptive virtual impedance loop is implemented to enhance dynamic transient current-limiting performance during the fault initiation phase.This approach improves the responsiveness of the inner loop and ensures safe system operation under various fault severities.Under asymmetric fault conditions,a negative-sequence reactive current compensation strategy is incorporated to further suppress negative-sequence voltage and improve voltage symmetry.The proposed control scheme enables coordinated operation of multiple control objectives,including voltage support,current suppression,and power angle stability,across different fault scenarios.Finally,MATLAB/Simulink simulation results validate the effectiveness of the proposed strategy,showcasing its superior performance in current limiting and power angle stability,thereby significantly enhancing the system’s fault ride-through capability.
基金Jiangsu Provincial College Student Innovation and Entrepreneurship Program(Grant No.SJCX25_2184)—“Multi-energy Complementary Optimization and Vehicle-Storage Bidirectional Interaction Technology Driven by Novel 5E Framework”(Principal Investigator:Yuan-Yuan ShiFunding Agency:Jiangsu Provincial Education Department)+3 种基金Huaian Natural Science Research Project(Grant No.HAB2024046)—“Optimal Control of Flexible Cold-Heat-Power Integrated System with Source-Grid-Load-Storage Coordination”(Principal Investigator:Jie JiFunding Agency:Huaian Science and Technology Bureau)Huaiyin Institute of TechnologyUniversity-funded Project(GrantNo.HGYK202511)—“Data-driven CooperativeOptimization Dispatch for Source-Grid-Load Systems”(Principal Investigator:Chu-Tong ZhangFunding Agency:Huaiyin Institute of Technology).
文摘In order to solve the problems of slow dynamic response and difficult multi-source coordination of solar electric vehicle charging stations under intermittent renewable energy,this paper proposes a hardware-algorithm co-design framework:the T-type three-level bidirectional converter(100 kHz switching frequency)based on silicon carbide(SiC)MOSFET is deeply integrated with fuzzy model predictive control(Fuzzy-MPC).At the hardware level,the switching trajectory and resonance suppression circuit(attenuation resonance peak 18 dB)are optimized,and the total loss is reduced by 23%compared with the traditional silicon-based IGBT.At the algorithm level,the adaptive parameter update mechanism and multi-objective rolling optimization are adopted,and the 5 ms level dynamic power allocation is realized by relying on edge computing.Experiments on 800 V DC microgrid(including 600 kW photovoltaic and 150 A·h energy storage)built based on MATLAB/Simulink hardware-in-the-loop(HIL)platform show that the system shortens the battery charging time from 42 to 28 min(the charging speed is increased by 33%).Through the 78%valley power utilization rate,the power purchase cost of high-priced power grids was significantly reduced,and the levelized electricity price decreased by 10.3%;Under the irradiation fluctuation,the renewable energy consumption rate increases by 10.1%,and the DC bus voltage fluctuation is stable within±10 V when the load step is±30%.The co-design provides an economically feasible and dynamically robust solution for the efficient integration of PV-ESG-EV in the smart grid.
基金funded by State Grid Corporation of China Central Branch Technology Project(52140024000C).
文摘In wind power transmission via modular multilevel converter based high voltage direct current(MMCHVDC)systems,under traditional control strategies,MMC-HVDCcannot provide inertia support to the receiving-end grid(REG)during disturbances.Moreover,due to the frequency decoupling between the two ends of the MMCHVDC,the sending-end wind farm(SEWF)cannot obtain the frequency variation information of the REG to provide inertia response.Therefore,this paper proposes a novel coordinated source-network-storage inertia control strategy based on wind power transmission via MMC-HVDC system.First,the grid-side MMC station(GS-MMC)maps the frequency variations of the REG to direct current(DC)voltage variations through the frequency mapping control,and uses submodule capacitor energy to provide inertial power.Then,the wind farm-side MMC station(WF-MMC)restores the DC voltage variations to frequency variations through the frequency restoration control and power loss compensation,providing real-time frequency information for the wind farm.Finally,based on real-time frequency information,thewind farmutilizes the rotor kinetic energy and energy storage to provide fast and lasting power support through the wind-storage coordinated inertia control strategy.Meanwhile,when the wind turbines withdraw from the inertia response phase,the energy storage can increase the power output to compensate for the power deficit,preventing secondary frequency drops.Furthermore,this paper uses small-signal analysis to determine the appropriate values for the key parameters of the proposed control strategy.A simulation model of the wind power transmission via MMCHVDC system is built in MATLAB/Simulink environment to validate and evaluate the proposed method.The results show that the proposed coordinated control strategy can effectively improve the system inertia level and avoid the secondary frequency drop under the load sudden increase condition.
基金support from the National Key R&D Program of China(Grant No.2020YFB1711100).
文摘To address the issue of abnormal energy consumption fluctuations in the converter steelmaking process,an integrated diagnostic method combining the gray wolf optimization(GWO)algorithm,support vector machine(SVM),and K-means clustering was proposed.Eight input parameters—derived from molten iron conditions and external factors—were selected as feature variables.A GWO-SVM model was developed to accurately predict the energy consumption of individual heats.Based on the prediction results,the mean absolute percentage error and maximum relative error of the test set were employed as criteria to identify heats with abnormal energy usage.For these heats,the K-means clustering algorithm was used to determine benchmark values of influencing factors from similar steel grades,enabling root-cause diagnosis of excessive energy consumption.The proposed method was applied to real production data from a converter in a steel plant.The analysis reveals that heat sample No.44 exhibits abnormal energy consumption,due to gas recovery being 1430.28 kg of standard coal below the benchmark level.A secondary contributing factor is a steam recovery shortfall of 237.99 kg of standard coal.This integrated approach offers a scientifically grounded tool for energy management in converter operations and provides valuable guidance for optimizing process parameters and enhancing energy efficiency.
基金Project(2007CB613504)supported by the National Key Basic Research Program of ChinaProjects(51004033,50974035,51074047)supported by the National Natural Science Foundation of ChinaProject(2008BAB34B01)supported by National Science and Technology Support Plan of China during the 11th Five-Year Plan
文摘To analyze the thermodynamic characteristics of leaching process of converter slag, φ-pH diagram of V-Ti-H2O system at oxygen partial pressure of 0.5 MPa, ionic mass concentration of 0.1 mol/kg and temperatures ranging from 60 to 200 ℃ was obtained by recently published critically assessed standard Gibbs energies and activity coefficients of various species. When pH2, stable regions of V3＋, VO2＋ and VO2＋ exist in the stable region of TiO2. The pH values of stable regions of vanadium and titanium decrease and redox potentials become more positive with the temperature increasing. Vanadium and titanium could be separated by one-step leaching based on thermodynamics. The experiment results of pressure acid leaching of converter slag show that leaching rates of vanadium and titanium are 96.87% and 8.76% respectively, at 140 ℃ of temperature, 0.5 MPa of oxygen partial pressure, 0.055-0.075mm of particle size, 15：1 of liquid to solid ratio, 120 min of leaching time, 500 r/min of stirring speed and 200 g/L of initial acid concentration. Vanadium and titanium could be selectively separated in the pressure acid leaching process, and the experiment result is in agreement with thermodynamic calculation result.
基金supported by National Natural Science Foundation of China(No.61473170)Key R&D Plan Project of Shandong Province,PRC(No.2016GSF115018)
文摘This paper proposes an optimized and coordinated model predictive control(MPC) scheme for doublyfed induction generators(DFIGs) with DC-based converter system to improve the efficiency and dynamic performance in DC grids. In this configuration, the stator and rotor of the DFIG are connected to the DC bus via voltage source converters, namely, a rotor side converter(RSC) and a stator side converter(SSC). Optimized trajectories for rotorflux and stator current are proposed to minimize Joule losses of the DFIG, which is particularly advantageous at low and moderate torque. The coordinated MPC scheme is applied to overcome the weaknesses of the field-oriented control technique in the rotor flux-oriented frame, which makes the rotor flux stable and the stator current track its reference closely and quickly. Lastly, simulations and experiments are carried out to validate the feasibility of the control scheme and to analyze the steady-state and dynamic performance of the DFIG.
文摘This paper presents a 2GS/s 10bit CMOS digital-to-analog converter （DAC） that consists of two unit current-cell matrixes for 6MSBs and 4LSBs, respectively, trading off between the precision and size of the chip. Current mode logic （CML） is used to ensure high speed,and a double centro-symmetric current matrix is designed by the Q^2 random walk strategy in order to ensure the linearity of the DAC. The DAC occupies 2.2mm × 2.2mm of die area and consumes 790mW with a single 3.3V power supply.
基金financially supported by the Shandong Provincial Natural Science Key Basic Program(Grant No.ZR2017ZA0202)the Qingdao Municipal Science&Technology Program(Grant No.15-8-3-7-jch)Special Project for Marine Renewable Energy(Grant No.GHME2016YY02)
文摘Among the wave energy converters (WECs), oscillating buoy is a promising type for wave energy development in offshore area. Conventional single-freedom oscillating buoy WECs with linear power take-off (PTO) system are less efficient under off-resonance conditions and have a narrow power capture bandwidth. Thus, a multi-freedom WEC with a nonlinear PTO system is proposed. This study examines a multi-freedom WEC with 3 degrees of freedom: surge, heave and pitch. Three different PTO systems (velocity-square, snap through, and constant PTO systems) and a traditional linear PTO system are applied to the WEC. A time-domain model is established using linear potential theory and Cummins equation. The kinematic equation is numerically calculated with the fourth-order Runge–Kutta method. The optimal average output power of the PTO systems in all degrees of freedom are obtained and compared. Other parameters of snap through PTO are also discussed in detail. Results show that according to the power capture performance, the order of the PTO systems from the best to worst is snap through PTO, constant PTO, linear PTO and velocity-square PTO. The resonant frequency of the WEC can be adjusted to the incident wave frequency by choosing specific parameters of the snap through PTO. Adding more DOFs can make the WEC get a better power performance in more wave frequencies. Both the above two methods can raise the WEC’s power capture performance significantly.
文摘The multi-string LED in parallel is a popular structure in backlight and lighting applications.The current balancing for each string is required to achieve uniform luminance and reliable operation.The conventional active current sharing technique using a switching converter or a linear switch is very complex,and needs extra components.The conventional coupled inductor based current sharing method is much more simple,but needs too many coupled inductors.
基金Natioual Hi-tech Research and Development Program-of China(863 Program. No.2007AA04Z132).
文摘A 3D torque converter design system is developed based on numerical investigation into flow field and CAD technology. The 3D steady-state flow field simulation is undertaken by using time averaged Reynolds equation and k-epsilon turbulence model, with mixing-plane boundary conditions at three section interfaces. The blades are designed according to the flow field characteristics by using a reverse design method in the system. The accurateness of numerical analysis and the validity of design system are verified by the fluid field experiment of desingn example of the torque converter. This kind of design and analysis system for torque converter based on integration of comput ationol fluid dynamics （CFD） and CAD is a powerful tool for torque converter manufacturing, but also a prettg important significance for research and development.
