All polymer solar cells(all-PSCs)promise mechanically-flexible and morphologically-stable organic photovoltaics and have aroused increased interests very recently.However,due to their disorderly conformation structure...All polymer solar cells(all-PSCs)promise mechanically-flexible and morphologically-stable organic photovoltaics and have aroused increased interests very recently.However,due to their disorderly conformation structures within the photoactive film,inefficient charge generation and carrier transport are observed which lead to inferior photovoltaic performance compared to smaller molecular acceptor-based photovoltaics.Here,by diluting PM6 with a cutting-edge polymeric acceptor PY-IT and diluting PY-IT with PM6 or D18,donor-dominating or acceptor-dominating heterojunctions were prepared.Synchrotron X-ray and multiple spectrometer techniques reveal that the diluted heterojunctions receive increased structural order,translating to enhanced carrier mobility,improved exciton diffusion length,and suppressed non-radiative recombination loss during the power conversion.As the results,the corresponding PM6+1%PY-IT/PY-IT+1%D18 and PM6+1%PY-IT/PY-IT+1%PM6 devices fabricated by layer-by-layer deposition received superior power conversion efficiency(PCE)of 19.4%and 18.8%respectively,along with enhanced operational lifetimes in air,outperforming the PCE of 17.5%in the PM6/PY-IT reference device.展开更多
A polymeric nanopore membrane with selective ionic transport has been proposed as a potential device to convert the chemical potential energy in salinity gradients to electrical power. However, its energy conversion e...A polymeric nanopore membrane with selective ionic transport has been proposed as a potential device to convert the chemical potential energy in salinity gradients to electrical power. However, its energy conversion efficiency and power density are often limited due to the challenge in reliably controlling the size of the nanopores with the conventional chemical etching method. Here we report that without chemical etching, polyimide （PI） membranes irradiated with GeV heavy ions have negatively charged nanopores, showing nearly perfect selectivity for cations over anions, and they can generate electrical power from salinity gradients. We further demonstrate that the power generation efficiency of the PI membrane approaches the theoretical limit, and the maximum power density reaches 130m W/m2 with a modified etching method, outperforming the previous energy conversion device that was made of polymeric nanopore membranes.展开更多
Here we report a regulation about power conversion in fuel cells. This regulation is expressed as that total power produced by fuel cells is always proportional to the square of the potential difference between the \{...Here we report a regulation about power conversion in fuel cells. This regulation is expressed as that total power produced by fuel cells is always proportional to the square of the potential difference between the \{equilibrium\} potential and work potential. With this regulation we deduced fuel cell performance equation which can describe the potential vs.the current performance curves, namely, polarization curves of fuel cells with three power source parameters: equilibrium potential E_0; internal resistance R; and power conversion coefficient K. The concept of the power conversion coefficient is a new criterion to evaluate and compare the characteristics and capacity of different fuel cells. The calculated values obtained with this equation agree with practical performance of different types of fuel cells.展开更多
The maximum power conversion efficiencies of the top-emitting,oxide-confined,two-dimensional integrated 2×2 and4×4 vertical-cavity surface-emitting laser（VCSEL） arrays with the oxide-apertures of 6 μm,16 ...The maximum power conversion efficiencies of the top-emitting,oxide-confined,two-dimensional integrated 2×2 and4×4 vertical-cavity surface-emitting laser（VCSEL） arrays with the oxide-apertures of 6 μm,16 μm,19 μm,26 μm,29 μm,36 μm,39 μm,and 46 urn are fabricated and characterized,respectively.The maximum power conversion efficiencies increase rapidly with the augment of oxide-aperture at the beginning and then decrease slowly.A maximum value of27.91%at an oxide-aperture of 18.6 μm is achieved by simulation.The experimental data are well consistent with the simulation results,which are analyzed by utilizing an empirical model.展开更多
The basic theory of the purchasing power at par refers to the rate of one country＇s currency to U.S. dollar while purchasing ＂a basket＂ goods and services in the same quantity and quality respectively in this count...The basic theory of the purchasing power at par refers to the rate of one country＇s currency to U.S. dollar while purchasing ＂a basket＂ goods and services in the same quantity and quality respectively in this country and U.S.A. This paper gives out calculation method of purchasing power conversion coefficient at par and how to calculate the non-base year purchasing power at par.展开更多
Driven by rapid advancements in smart wearable technologies and perovskite photovoltaics,flexible perovskite solar cells(FPSCs)have emerged as highly promising autonomous power sources,poised to transform the next gen...Driven by rapid advancements in smart wearable technologies and perovskite photovoltaics,flexible perovskite solar cells(FPSCs)have emerged as highly promising autonomous power sources,poised to transform the next generation of mobile energy systems,portable electronics,and integrated wearable devices.For successful deployment in real-world scenarios,FPSCs must exhibit a combination of key attributes,including high power conversion efficiency,lightweight architecture,environmental robustness,and mechanical adaptability-encompassing flexibility,stretchability,and twistability.This review provides a detailed examination of the evolution,current state,and practical deployment of FPSCs,emphasizing their potential as efficient,portable energy solutions.It investigates advanced strategies for improving environmental resilience and mechanical recoverability,including the engineering of flexible substrates,deposition of high-quality perovskite films,and optimization of charge-selective interfaces.Additionally,it offers a systematic analysis of device design,fabrication protocols,scalable printing techniques,and standardized performance evaluation methods tailored for wearable FPSCs.Recent progress in enhancing the optoelectronic properties and mechanical durability of FPSCs is also critically reviewed.Ultimately,this work delivers a comprehensive perspective on FPSCs from both optoelectronic and mechanical viewpoints,identifies key challenges,and outlines future research pathways toward the seamless integration of FPSCs into multifunctional,next-generation wearable systems.展开更多
A nonfused ring electron acceptor(NFREA),designated as TT-Ph-C6,has been synthesized with the aim of enhancing the power conversion efficiency(PCE)of organic solar cells(OSCs).By integrating asymmetric phenylalkylamin...A nonfused ring electron acceptor(NFREA),designated as TT-Ph-C6,has been synthesized with the aim of enhancing the power conversion efficiency(PCE)of organic solar cells(OSCs).By integrating asymmetric phenylalkylamino side groups,TT-Ph-C6 demonstrates excellent solubility and its crystal structure exhibits compact packing structures with a three-dimensional molecular stacking network.These structural attributes markedly promote exciton diffusion and charge carrier mobility,particularly advantageous for the fabrication of thick-film devices.TT-Ph-C6-based devices have attained a PCE of 18.01%at a film thickness of 100 nm,and even at a film thickness of 300 nm,the PCE remains at 14.64%,surpassing that of devices based on 2BTh-2F.These remarkable properties position TT-Ph-C6 as a highly promising NFREA material for boosting the efficiency of OSCs.展开更多
The fluorination strategy has been proven effective in significantly enhancing the photovoltaic performance of organic solar cells(OSCs) based on non-fused ring electron acceptors(NFREAs).However,research on the impac...The fluorination strategy has been proven effective in significantly enhancing the photovoltaic performance of organic solar cells(OSCs) based on non-fused ring electron acceptors(NFREAs).However,research on the impact of fluorination positions at side chains on NFREAs device performance remains scant.In this study,we introduce two isomeric NFREAs,designated as GA-2F-E and GA-2F,distinguished by their fluorination positions at the side chains.Both NFREAs share a thiophene[3,2-b]thiophene core,but their side chains differ:GA-2F-E features two(4-butylphenyl)-N-(4-fluorophenyl) amino groups,whereas GA-2F's side chains consist of bis(4-fluorophenyl)amino and bis(4-butylphenyl)amino groups attached to opposite sides of the core.To delve into the influence of fluorination positions on the optoelectronic properties,aggregation behavior,and overall efficiency of the acceptor molecules,a comprehensive investigation was conducted.The findings reveal that,despite similar photophysical properties and comparable absorption bandwidths,GA-2F-E,with fluorine atoms positioned on both sides of the molecular framework,demonstrates more compact π-π stacking,reduced bimolecular recombination,superior exciton transport,and a more balanced,higher mobility.As a result of these advantages,OSCs optimized with D18:GA-2F-E achieve a remarkable power conversion efficiency(PCE) of 16.45 %,surpassing the 15.83 %PCE of devices utilizing D18:GA-2F.This research underscores the potential of NFREAs in future applications and highlights the significance of fluorination positions in enhancing OSC performance,paving the way for the development of more efficient NFREAs.展开更多
The principle of single to single phase matrix electric power conversioin is further studied and the conversioin switch function is introduced into conventional rectifier inverter, thus a general character of the t...The principle of single to single phase matrix electric power conversioin is further studied and the conversioin switch function is introduced into conventional rectifier inverter, thus a general character of the two conversion techniques is discovered. It is characteristic of the switch functiion to follow mains voltage distortion and mains frequency drift. By utilizing the merit, unidirectional switch duty rations of the inverter follow the variation of DC link voltage automatically, thus the size of DC link electrolytic capacitor can be reduced considerably, bringing about improved mains side power factor. Corresponding topologies and theoretical and theoretical derivations are given, and so are the simulation results, based on which it is confirmed that the single to single phase matrix conversion technique is potentially useful in large scale production, and the introduction of switch function can yield good economic returns.展开更多
Nanostructured TiO2 with differentiate morphologies has attracted tremendous attention due to its wide band-gap nature as well as outstanding optical and electric properties for solar-driven light-toelectricity conver...Nanostructured TiO2 with differentiate morphologies has attracted tremendous attention due to its wide band-gap nature as well as outstanding optical and electric properties for solar-driven light-toelectricity conversion application. Layered-stacking TiO2 film such as double-layer, tri-layer, quadrupleor quintuplicate-layer, is highly desirable to the design of high-performance semiconductor material photoanodes and the development of advanced photovoltaic devices. In this minireview, we will summarize the recent progress and achievements on proof-of-concept of layered-stacking TiO2 films（LTFs） for solar cells with emphasis on the tailored properties and synergistic functionalization of LTFs, such as optimized sensitizer adsorption, broadened light confinement as well as facilitated electron transport characteristics.Various demonstrations of LTFs photovoltaic systems provide lots of possibilities and flexibilities for more efficient solar energy utilization that a wide variety of TiO2 with distinguished morphologies can be integrated into differently structured photoanodes with synergistic and complementary advantages. This key structure engineering technology will also pave the way for the development of next generation state-ofthe-art electronics and optoelectronics. Finally, from our point of view, we conclude the future research interest and efforts for constructing more efficient LTFs as photoelectrode, which will be highly warranted to advance the solar energy conversion process.展开更多
A single cathode linear plasma device has been designed and constructed to investigate the interactions between plasma and materials at the Sichuan University. In order to further investigate the Ohmic power of the de...A single cathode linear plasma device has been designed and constructed to investigate the interactions between plasma and materials at the Sichuan University. In order to further investigate the Ohmic power of the device, the output heat load on the specimen and electric potential difference（between cathode and anode） have been tested under different discharge currents. This special power distribution in the radial direction of the plasma discharge channel has also been discussed and described by some improved integral equations in this paper;it can be further simplified as P ∝ α^（-2） in one-parameter. Besides, we have measured the power loss of the channel under different discharge currents by the calorimetric method, calculated the effective power of the device and evaluated the performances of the plasma device through the power efficiency analysis.展开更多
Power sharing among multiterminal high voltage direct current terminals(MT-HVDC)is mainly developed based on a priority or sequential manners,which uses to prevent the problem of overloading due to a predefined contro...Power sharing among multiterminal high voltage direct current terminals(MT-HVDC)is mainly developed based on a priority or sequential manners,which uses to prevent the problem of overloading due to a predefined controller coefficient.Furthermore,fixed power sharing control also suffers from an inability to identify power availability at a rectification station.There is a need for a controller that ensures an efficient power sharing among the MT-HVDC terminals,prevents the possibility of overloading,and utilizes the available power sharing.A new adaptive wireless control for active power sharing among multiterminal(MT-HVDC)systems,including power availability and power management policy,is proposed in this paper.The proposed control strategy solves these issues and,this proposed controller strategy is a generic method that can be applied for unlimited number of converter stations.The rational of this proposed controller is to increase the system reliability by avoiding the necessity of fast communication links.The test system in this paper consists of four converter stations based on three phase-two AC voltage levels.The proposed control strategy for a multiterminal HVDC system is conducted in the power systems computer aided design/electromagnetic transient design and control(PSCAD/EMTDC)simulation environment.The simulation results significantly show the flexibility and usefulness of the proposed power sharing control provided by the new adaptive wireless method.展开更多
Power supply transformation technology is a required course for new energy major, which is a comprehensive course. Under the traditional teaching mode, students have no concept of waveform, which brings many difficult...Power supply transformation technology is a required course for new energy major, which is a comprehensive course. Under the traditional teaching mode, students have no concept of waveform, which brings many difficulties to teaching and experiment. A power transformation technology based on PSIM simulation is proposed. Before class, students solve the task of building the simulation model, and then introduce the knowledge points. This can not only make up for the lack of experimental facilities and also stimulate students interest in learning. Classroom teaching practice shows that this method can effectively improve the teaching and experiment efficiency.展开更多
Trap-assisted charge recombination is one of the primary limitationsof restricting the performance of organic solar cells. However, effectivelyreducing the presence of traps in the photoactive layer remains challengin...Trap-assisted charge recombination is one of the primary limitationsof restricting the performance of organic solar cells. However, effectivelyreducing the presence of traps in the photoactive layer remains challenging.Herein, wide bandgap polymer donor PTzBI-dF is demonstrated as an effectivemodulator for enhancing the crystallinity of the bulk heterojunction active layerscomposed of D18 derivatives blended with Y6, leading to dense and orderedmolecular packings, and thus, improves photoluminescence quenching properties.As a result, the photovoltaic devices exhibit reduced trap-assisted charge recombinationlosses, achieving an optimized power conversion efficiency of over 19%.Besides the efficiency enhancement, the devices comprised of PTzBI-dF as athird component simultaneously attain decreased current leakage, improved chargecarrier mobilities, and suppressed bimolecular charge recombination, leading toreduced energy losses. The advanced crystalline structures induced by PTzBI-dFand its characteristics, such as well-aligned energy level, and complementaryabsorption spectra, are ascribed to the promising performance improvements.Our findings suggest that donor phase engineering is a feasible approach to tuning the molecular packings in the active layer, providingguidelines for designing effective morphology modulators for high-performance organic solar cells.展开更多
In recent years, the research advancements have high-lighted the critical role of the A-site cation in determining the optoelectronic and physicochemical properties of organicinorganic lead halide perovskites. Mixed-c...In recent years, the research advancements have high-lighted the critical role of the A-site cation in determining the optoelectronic and physicochemical properties of organicinorganic lead halide perovskites. Mixed-cation perovskites(MCPs) have been extensively used as absorber thin films in perovskite solar cells(PSCs), achieving high power conversion efficiencies(PCE) over 26%^([1, 2]).展开更多
In this study,high-performance D18:L8-BO bulk heterojunction organic solar cells(OSCs)were prepared by employing a hot-solution strategy to optimize the active layer morphology during the film solidification process.B...In this study,high-performance D18:L8-BO bulk heterojunction organic solar cells(OSCs)were prepared by employing a hot-solution strategy to optimize the active layer morphology during the film solidification process.By heating the chloroform(CF)solution to 70℃(slightly above the boiling point of CF,~61.2℃),an optimal balance between solvent evaporation and molecular self-assembly was achieved,resulting in enhanced crystallinity,favorable π-π stacking,and ideal nanoscale phase separation.These improvements significantly boost the power conversion efficiency from 17.74%(for the device processed at a room temperature of 30℃)to 19.56%.Moreover,the in-situ grazing-incidence wide-angle X-ray scattering technology was utilized to monitor the crystallization and morphology evolution of the active layer,offering real-time insights into molecule self-assembly and phase separation dynamics during active layer solidification.This work not only provides a simple and scalable approach for fabricating high-efficiency OSCs but also offers fundamental insights into the influence of solution temperature on active layer morphology evolution dynamics,paving the way for large-scale industrial production of organic solar cells.展开更多
With the continuous improvement of photovoltaic efficiency in the organic photovoltaic(OPV),interface engineering has emerged as a pivotal issue in their practical deployment.Currently,the robust crystallinity of smal...With the continuous improvement of photovoltaic efficiency in the organic photovoltaic(OPV),interface engineering has emerged as a pivotal issue in their practical deployment.Currently,the robust crystallinity of small molecule electron transport layers(ETLs)and the poor film-forming abilities of conjugated polymer ETLs are a huge obstacle in this field.Herein,an innovative and efficient nonconjugated polymer ETL,namely PNDI-SO,which contains polar cationic segments for solubility and conjugated units for efficient charge transport in stable OPV cells,is reported.Endowed with suitable energy levels and excellent electron extraction capabilities,PNDI-SO-based OPV cells attain a power conversion efficiency(PCE)of 18.54%.Furthermore,compared with conventional OPV cells utilizing PFN-Br or PDINN,PNDI-SO substantially enhances long-term stability under continuous illumination,evidenced by a T80 lifetime(signifying retention of 80% of initial performance)exceeding 1250 h.Notably,through scanning electron microscope,we verified that PNDI-SO achieves a harmonious balance between film-forming ability and charge transport properties for ETL,enabling the blade-coating OPV based on PBDB-TF:BTP-eC9 to achieve a PCE of 17.47%.These results suggest the potential of PNDI-SO as a promising interface material for industrial printing applications in OPV fabrication.展开更多
The Shockley-Queisser(S-Q)model sets a theoretical limit on the power conversion efficiency(PCE)of single-junction solar cells at around 33%.Recently,a PCE of 50%-60%was achieved for the first time in n-type singlejun...The Shockley-Queisser(S-Q)model sets a theoretical limit on the power conversion efficiency(PCE)of single-junction solar cells at around 33%.Recently,a PCE of 50%-60%was achieved for the first time in n-type singlejunction Si solar cells by inhibiting light conversion to heat at low temperatures.Understanding these new observations opens tremendous opportunities for designing solar cells with even higher PCE to provide efficient and powerful energy sources for cryogenic devices and outer and deep space explorations.展开更多
A research team led by Dr.GE Ziyi from the Ningbo Institute of Materials Technology and Engineering(NIMTE)of the Chinese Academy of Sciences has developed novel giant acceptors with an oxygenated linker,enabling the c...A research team led by Dr.GE Ziyi from the Ningbo Institute of Materials Technology and Engineering(NIMTE)of the Chinese Academy of Sciences has developed novel giant acceptors with an oxygenated linker,enabling the creation of highly efficient non-halogen-processed organic solar cells(OSCs),with a power conversion efficiency(PCE)up to 20.02%.展开更多
The rapid advancement of metal halide perovskites can be attributed to their exceptional optoelectronic properties and facile solution processing technique.Noteworthy strides have been achieved in the realm of perovsk...The rapid advancement of metal halide perovskites can be attributed to their exceptional optoelectronic properties and facile solution processing technique.Noteworthy strides have been achieved in the realm of perovskite solar cells(PSCs),with a certified power conversion efficiency(PCE)escalating to 26.7%over the course of a decade,positioning them as promising contenders for next-generation photovoltaic technologies[1].However,the formation of crystal defects,including anion/cation vacancies,Pb–I antisite defects,and uncoordinated Pb^(2+),along the surface and grain boundaries(GBs)of perovskite layers during the solution processing stage poses a significant challenge,compromising the photoelectric performance and stability of PSCs.展开更多
基金supported by the Key Research and Development Program of Hubei Province(2023BAB116)the National Natural Science Foundation of China(52203238,52273196,52073221)the Fundamental Research Funds for the Central Universities of China(WUT:2021III016JC).
文摘All polymer solar cells(all-PSCs)promise mechanically-flexible and morphologically-stable organic photovoltaics and have aroused increased interests very recently.However,due to their disorderly conformation structures within the photoactive film,inefficient charge generation and carrier transport are observed which lead to inferior photovoltaic performance compared to smaller molecular acceptor-based photovoltaics.Here,by diluting PM6 with a cutting-edge polymeric acceptor PY-IT and diluting PY-IT with PM6 or D18,donor-dominating or acceptor-dominating heterojunctions were prepared.Synchrotron X-ray and multiple spectrometer techniques reveal that the diluted heterojunctions receive increased structural order,translating to enhanced carrier mobility,improved exciton diffusion length,and suppressed non-radiative recombination loss during the power conversion.As the results,the corresponding PM6+1%PY-IT/PY-IT+1%D18 and PM6+1%PY-IT/PY-IT+1%PM6 devices fabricated by layer-by-layer deposition received superior power conversion efficiency(PCE)of 19.4%and 18.8%respectively,along with enhanced operational lifetimes in air,outperforming the PCE of 17.5%in the PM6/PY-IT reference device.
基金Supported by the National Natural Science Foundation of China under Grant No 11335003
文摘A polymeric nanopore membrane with selective ionic transport has been proposed as a potential device to convert the chemical potential energy in salinity gradients to electrical power. However, its energy conversion efficiency and power density are often limited due to the challenge in reliably controlling the size of the nanopores with the conventional chemical etching method. Here we report that without chemical etching, polyimide （PI） membranes irradiated with GeV heavy ions have negatively charged nanopores, showing nearly perfect selectivity for cations over anions, and they can generate electrical power from salinity gradients. We further demonstrate that the power generation efficiency of the PI membrane approaches the theoretical limit, and the maximum power density reaches 130m W/m2 with a modified etching method, outperforming the previous energy conversion device that was made of polymeric nanopore membranes.
基金Supported by EPSRC Funds(No.GR/ R5 0 4 17) and an EPSRC/ HEFCF J.I.F Award(No.JIF4 NESCEQ )
文摘Here we report a regulation about power conversion in fuel cells. This regulation is expressed as that total power produced by fuel cells is always proportional to the square of the potential difference between the \{equilibrium\} potential and work potential. With this regulation we deduced fuel cell performance equation which can describe the potential vs.the current performance curves, namely, polarization curves of fuel cells with three power source parameters: equilibrium potential E_0; internal resistance R; and power conversion coefficient K. The concept of the power conversion coefficient is a new criterion to evaluate and compare the characteristics and capacity of different fuel cells. The calculated values obtained with this equation agree with practical performance of different types of fuel cells.
基金supported by the National Natural Science Foundation of China(Grant Nos.61222501 and 61335004)the Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20111103110019)
文摘The maximum power conversion efficiencies of the top-emitting,oxide-confined,two-dimensional integrated 2×2 and4×4 vertical-cavity surface-emitting laser（VCSEL） arrays with the oxide-apertures of 6 μm,16 μm,19 μm,26 μm,29 μm,36 μm,39 μm,and 46 urn are fabricated and characterized,respectively.The maximum power conversion efficiencies increase rapidly with the augment of oxide-aperture at the beginning and then decrease slowly.A maximum value of27.91%at an oxide-aperture of 18.6 μm is achieved by simulation.The experimental data are well consistent with the simulation results,which are analyzed by utilizing an empirical model.
文摘The basic theory of the purchasing power at par refers to the rate of one country＇s currency to U.S. dollar while purchasing ＂a basket＂ goods and services in the same quantity and quality respectively in this country and U.S.A. This paper gives out calculation method of purchasing power conversion coefficient at par and how to calculate the non-base year purchasing power at par.
基金supported by the Commercialization Promotion Agency for R&D Outcomes(COMPA)grant funded by the Korea government(Ministry of Science and ICT)(RS-2025-02311658)supported by the Ministry of Education of the Republic of Korea and the National Research Foundation of Korea(NRF-2023R1A2C2008017)Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(NRF-2020R1A6A1A03043435).
文摘Driven by rapid advancements in smart wearable technologies and perovskite photovoltaics,flexible perovskite solar cells(FPSCs)have emerged as highly promising autonomous power sources,poised to transform the next generation of mobile energy systems,portable electronics,and integrated wearable devices.For successful deployment in real-world scenarios,FPSCs must exhibit a combination of key attributes,including high power conversion efficiency,lightweight architecture,environmental robustness,and mechanical adaptability-encompassing flexibility,stretchability,and twistability.This review provides a detailed examination of the evolution,current state,and practical deployment of FPSCs,emphasizing their potential as efficient,portable energy solutions.It investigates advanced strategies for improving environmental resilience and mechanical recoverability,including the engineering of flexible substrates,deposition of high-quality perovskite films,and optimization of charge-selective interfaces.Additionally,it offers a systematic analysis of device design,fabrication protocols,scalable printing techniques,and standardized performance evaluation methods tailored for wearable FPSCs.Recent progress in enhancing the optoelectronic properties and mechanical durability of FPSCs is also critically reviewed.Ultimately,this work delivers a comprehensive perspective on FPSCs from both optoelectronic and mechanical viewpoints,identifies key challenges,and outlines future research pathways toward the seamless integration of FPSCs into multifunctional,next-generation wearable systems.
基金Financial support from the National Natural Science Foundation of China(22375024,21975031,21734009,51933001,22109080,and 52173174)the Natural Science Foundation of Shandong Province(No.ZR2022YQ45)+2 种基金the Taishan Scholars Program(Nos.tstp20221121 and tsqnz20221134)The Beijing Natural Science Foundation(No.2244073)supported by State Key Laboratory of Bio-Fibers and Eco-Textiles(Qingdao University)(RZ2200002821)is acknowledged.
文摘A nonfused ring electron acceptor(NFREA),designated as TT-Ph-C6,has been synthesized with the aim of enhancing the power conversion efficiency(PCE)of organic solar cells(OSCs).By integrating asymmetric phenylalkylamino side groups,TT-Ph-C6 demonstrates excellent solubility and its crystal structure exhibits compact packing structures with a three-dimensional molecular stacking network.These structural attributes markedly promote exciton diffusion and charge carrier mobility,particularly advantageous for the fabrication of thick-film devices.TT-Ph-C6-based devices have attained a PCE of 18.01%at a film thickness of 100 nm,and even at a film thickness of 300 nm,the PCE remains at 14.64%,surpassing that of devices based on 2BTh-2F.These remarkable properties position TT-Ph-C6 as a highly promising NFREA material for boosting the efficiency of OSCs.
基金financially supported by the National Natural Science Foundation of China (Nos.22375024,21975031,51933001,and 21734009)。
文摘The fluorination strategy has been proven effective in significantly enhancing the photovoltaic performance of organic solar cells(OSCs) based on non-fused ring electron acceptors(NFREAs).However,research on the impact of fluorination positions at side chains on NFREAs device performance remains scant.In this study,we introduce two isomeric NFREAs,designated as GA-2F-E and GA-2F,distinguished by their fluorination positions at the side chains.Both NFREAs share a thiophene[3,2-b]thiophene core,but their side chains differ:GA-2F-E features two(4-butylphenyl)-N-(4-fluorophenyl) amino groups,whereas GA-2F's side chains consist of bis(4-fluorophenyl)amino and bis(4-butylphenyl)amino groups attached to opposite sides of the core.To delve into the influence of fluorination positions on the optoelectronic properties,aggregation behavior,and overall efficiency of the acceptor molecules,a comprehensive investigation was conducted.The findings reveal that,despite similar photophysical properties and comparable absorption bandwidths,GA-2F-E,with fluorine atoms positioned on both sides of the molecular framework,demonstrates more compact π-π stacking,reduced bimolecular recombination,superior exciton transport,and a more balanced,higher mobility.As a result of these advantages,OSCs optimized with D18:GA-2F-E achieve a remarkable power conversion efficiency(PCE) of 16.45 %,surpassing the 15.83 %PCE of devices utilizing D18:GA-2F.This research underscores the potential of NFREAs in future applications and highlights the significance of fluorination positions in enhancing OSC performance,paving the way for the development of more efficient NFREAs.
文摘The principle of single to single phase matrix electric power conversioin is further studied and the conversioin switch function is introduced into conventional rectifier inverter, thus a general character of the two conversion techniques is discovered. It is characteristic of the switch functiion to follow mains voltage distortion and mains frequency drift. By utilizing the merit, unidirectional switch duty rations of the inverter follow the variation of DC link voltage automatically, thus the size of DC link electrolytic capacitor can be reduced considerably, bringing about improved mains side power factor. Corresponding topologies and theoretical and theoretical derivations are given, and so are the simulation results, based on which it is confirmed that the single to single phase matrix conversion technique is potentially useful in large scale production, and the introduction of switch function can yield good economic returns.
基金the financial supports from the NSFC(51472274)the GDUPS(2016)+2 种基金the program of Guangzhou Science and Technology Project(201504010031)the NSF of Guangdong Province(S2013030013474)the Fundamental Research Funds for the Central Universities
文摘Nanostructured TiO2 with differentiate morphologies has attracted tremendous attention due to its wide band-gap nature as well as outstanding optical and electric properties for solar-driven light-toelectricity conversion application. Layered-stacking TiO2 film such as double-layer, tri-layer, quadrupleor quintuplicate-layer, is highly desirable to the design of high-performance semiconductor material photoanodes and the development of advanced photovoltaic devices. In this minireview, we will summarize the recent progress and achievements on proof-of-concept of layered-stacking TiO2 films（LTFs） for solar cells with emphasis on the tailored properties and synergistic functionalization of LTFs, such as optimized sensitizer adsorption, broadened light confinement as well as facilitated electron transport characteristics.Various demonstrations of LTFs photovoltaic systems provide lots of possibilities and flexibilities for more efficient solar energy utilization that a wide variety of TiO2 with distinguished morphologies can be integrated into differently structured photoanodes with synergistic and complementary advantages. This key structure engineering technology will also pave the way for the development of next generation state-ofthe-art electronics and optoelectronics. Finally, from our point of view, we conclude the future research interest and efforts for constructing more efficient LTFs as photoelectrode, which will be highly warranted to advance the solar energy conversion process.
基金supported by International Thermonuclear Experimental Reactor(ITER)Program(No.2013GB114003)National Natural Science Foundation of China(Nos.11275135 and 11475122)
文摘A single cathode linear plasma device has been designed and constructed to investigate the interactions between plasma and materials at the Sichuan University. In order to further investigate the Ohmic power of the device, the output heat load on the specimen and electric potential difference（between cathode and anode） have been tested under different discharge currents. This special power distribution in the radial direction of the plasma discharge channel has also been discussed and described by some improved integral equations in this paper;it can be further simplified as P ∝ α^（-2） in one-parameter. Besides, we have measured the power loss of the channel under different discharge currents by the calorimetric method, calculated the effective power of the device and evaluated the performances of the plasma device through the power efficiency analysis.
文摘Power sharing among multiterminal high voltage direct current terminals(MT-HVDC)is mainly developed based on a priority or sequential manners,which uses to prevent the problem of overloading due to a predefined controller coefficient.Furthermore,fixed power sharing control also suffers from an inability to identify power availability at a rectification station.There is a need for a controller that ensures an efficient power sharing among the MT-HVDC terminals,prevents the possibility of overloading,and utilizes the available power sharing.A new adaptive wireless control for active power sharing among multiterminal(MT-HVDC)systems,including power availability and power management policy,is proposed in this paper.The proposed control strategy solves these issues and,this proposed controller strategy is a generic method that can be applied for unlimited number of converter stations.The rational of this proposed controller is to increase the system reliability by avoiding the necessity of fast communication links.The test system in this paper consists of four converter stations based on three phase-two AC voltage levels.The proposed control strategy for a multiterminal HVDC system is conducted in the power systems computer aided design/electromagnetic transient design and control(PSCAD/EMTDC)simulation environment.The simulation results significantly show the flexibility and usefulness of the proposed power sharing control provided by the new adaptive wireless method.
文摘Power supply transformation technology is a required course for new energy major, which is a comprehensive course. Under the traditional teaching mode, students have no concept of waveform, which brings many difficulties to teaching and experiment. A power transformation technology based on PSIM simulation is proposed. Before class, students solve the task of building the simulation model, and then introduce the knowledge points. This can not only make up for the lack of experimental facilities and also stimulate students interest in learning. Classroom teaching practice shows that this method can effectively improve the teaching and experiment efficiency.
基金support from the National Natural Science Foundation of China(62275057)the Guangxi Natural Science Foundation(2023GXNSFFA026004 and 2022GXNSFDA035066)+2 种基金the Innovation Project of Guangxi Graduate Education(YCBZ2024034)Natural Science Foundation of Ningbo under grant(2022J149)Natural Science Foundation of Ningbo under grant(2022A-230-G)
文摘Trap-assisted charge recombination is one of the primary limitationsof restricting the performance of organic solar cells. However, effectivelyreducing the presence of traps in the photoactive layer remains challenging.Herein, wide bandgap polymer donor PTzBI-dF is demonstrated as an effectivemodulator for enhancing the crystallinity of the bulk heterojunction active layerscomposed of D18 derivatives blended with Y6, leading to dense and orderedmolecular packings, and thus, improves photoluminescence quenching properties.As a result, the photovoltaic devices exhibit reduced trap-assisted charge recombinationlosses, achieving an optimized power conversion efficiency of over 19%.Besides the efficiency enhancement, the devices comprised of PTzBI-dF as athird component simultaneously attain decreased current leakage, improved chargecarrier mobilities, and suppressed bimolecular charge recombination, leading toreduced energy losses. The advanced crystalline structures induced by PTzBI-dFand its characteristics, such as well-aligned energy level, and complementaryabsorption spectra, are ascribed to the promising performance improvements.Our findings suggest that donor phase engineering is a feasible approach to tuning the molecular packings in the active layer, providingguidelines for designing effective morphology modulators for high-performance organic solar cells.
基金financially supported by the National Natural Science Foundation of China (52462032, 62274018, 52462031)Natural Science Foundation of Yunnan Province (202501AT070353, 202101BE070001-049)+2 种基金the Xinjiang Construction Corps Key Areas of Science and Technology Research Project (2023AB029)the Tianchi Talent Program of Xinjiang Uygur Autonomous Region (2024, Jiangzhao Chen)the Key Project of Chongqing Overseas Students Returning to China Entrepreneurship and Innovation Support Plan (cx2023006)。
文摘In recent years, the research advancements have high-lighted the critical role of the A-site cation in determining the optoelectronic and physicochemical properties of organicinorganic lead halide perovskites. Mixed-cation perovskites(MCPs) have been extensively used as absorber thin films in perovskite solar cells(PSCs), achieving high power conversion efficiencies(PCE) over 26%^([1, 2]).
基金financially supported by the National Natural Science Foundation of China(61705003)。
文摘In this study,high-performance D18:L8-BO bulk heterojunction organic solar cells(OSCs)were prepared by employing a hot-solution strategy to optimize the active layer morphology during the film solidification process.By heating the chloroform(CF)solution to 70℃(slightly above the boiling point of CF,~61.2℃),an optimal balance between solvent evaporation and molecular self-assembly was achieved,resulting in enhanced crystallinity,favorable π-π stacking,and ideal nanoscale phase separation.These improvements significantly boost the power conversion efficiency from 17.74%(for the device processed at a room temperature of 30℃)to 19.56%.Moreover,the in-situ grazing-incidence wide-angle X-ray scattering technology was utilized to monitor the crystallization and morphology evolution of the active layer,offering real-time insights into molecule self-assembly and phase separation dynamics during active layer solidification.This work not only provides a simple and scalable approach for fabricating high-efficiency OSCs but also offers fundamental insights into the influence of solution temperature on active layer morphology evolution dynamics,paving the way for large-scale industrial production of organic solar cells.
基金the National Natural Science Foundation of China(52303218 and 52303222)the China Postdoctoral Science Foundation(2022M720314)+1 种基金the Natural Science Foundation of Fujian Province(2023J01403)the Beijing Postdoctoral Science Foundation(2023-zz-101)for funding。
文摘With the continuous improvement of photovoltaic efficiency in the organic photovoltaic(OPV),interface engineering has emerged as a pivotal issue in their practical deployment.Currently,the robust crystallinity of small molecule electron transport layers(ETLs)and the poor film-forming abilities of conjugated polymer ETLs are a huge obstacle in this field.Herein,an innovative and efficient nonconjugated polymer ETL,namely PNDI-SO,which contains polar cationic segments for solubility and conjugated units for efficient charge transport in stable OPV cells,is reported.Endowed with suitable energy levels and excellent electron extraction capabilities,PNDI-SO-based OPV cells attain a power conversion efficiency(PCE)of 18.54%.Furthermore,compared with conventional OPV cells utilizing PFN-Br or PDINN,PNDI-SO substantially enhances long-term stability under continuous illumination,evidenced by a T80 lifetime(signifying retention of 80% of initial performance)exceeding 1250 h.Notably,through scanning electron microscope,we verified that PNDI-SO achieves a harmonious balance between film-forming ability and charge transport properties for ETL,enabling the blade-coating OPV based on PBDB-TF:BTP-eC9 to achieve a PCE of 17.47%.These results suggest the potential of PNDI-SO as a promising interface material for industrial printing applications in OPV fabrication.
基金support from the National Natural Science Foundation of China(Grant Nos.52371197,51671139).
文摘The Shockley-Queisser(S-Q)model sets a theoretical limit on the power conversion efficiency(PCE)of single-junction solar cells at around 33%.Recently,a PCE of 50%-60%was achieved for the first time in n-type singlejunction Si solar cells by inhibiting light conversion to heat at low temperatures.Understanding these new observations opens tremendous opportunities for designing solar cells with even higher PCE to provide efficient and powerful energy sources for cryogenic devices and outer and deep space explorations.
文摘A research team led by Dr.GE Ziyi from the Ningbo Institute of Materials Technology and Engineering(NIMTE)of the Chinese Academy of Sciences has developed novel giant acceptors with an oxygenated linker,enabling the creation of highly efficient non-halogen-processed organic solar cells(OSCs),with a power conversion efficiency(PCE)up to 20.02%.
基金supported by the Science,Technology,Innovation Commission of Shenzhen Municipality(GJHZ20220913143204008)Postdoctoral Research Project Funding in Shaanxi Province.
文摘The rapid advancement of metal halide perovskites can be attributed to their exceptional optoelectronic properties and facile solution processing technique.Noteworthy strides have been achieved in the realm of perovskite solar cells(PSCs),with a certified power conversion efficiency(PCE)escalating to 26.7%over the course of a decade,positioning them as promising contenders for next-generation photovoltaic technologies[1].However,the formation of crystal defects,including anion/cation vacancies,Pb–I antisite defects,and uncoordinated Pb^(2+),along the surface and grain boundaries(GBs)of perovskite layers during the solution processing stage poses a significant challenge,compromising the photoelectric performance and stability of PSCs.
