This paper introduces a small perturbation frequency domain thermal analysis model based on the nonlinear dynamics model.The model can be applied to study the high-precision temperature control of thermal systems unde...This paper introduces a small perturbation frequency domain thermal analysis model based on the nonlinear dynamics model.The model can be applied to study the high-precision temperature control of thermal systems under low-frequency complex perturbations.The frequency domain characteristics of the space gravitational wave detection satellite are analyzed,and a multi-channel perturbation structure is established.The effects of three kinds of heat flow perturbations,including external heat flow,power generation power,and waste heat of electronic equipment,on the temperature through five transfer paths are investigated.It has been discovered that the waste heat from electronic equipment inside the satellite has the most noticeable effect on the temperature power spectral density of temperature-sensitive optical loads,serving as the primary factor influencing thermal stability.For complex noise signals,the small perturbation analysis method can decompose the different frequency components or ranges,reducing the problem to linearized analysis and simplifying complex calculations.The results indicate that the temperature power spectral density decreases as signal frequency increases,with low-frequency signals exerting a greater influence on temperature stability.The small perturbation analysis method is a novel and effective method for temperature control of space thermal systems,with high accuracy and stability.展开更多
The liquid cooling system(LCS)of fuel cells is challenged by significant time delays,model uncertainties,pump and fan coupling,and frequent disturbances,leading to overshoot and control oscillations that degrade tempe...The liquid cooling system(LCS)of fuel cells is challenged by significant time delays,model uncertainties,pump and fan coupling,and frequent disturbances,leading to overshoot and control oscillations that degrade temperature regulation performance.To address these challenges,we propose a composite control scheme combining fuzzy logic and a variable-gain generalized supertwisting algorithm(VG-GSTA).Firstly,a one-dimensional(1D)fuzzy logic controler(FLC)for the pump ensures stable coolant flow,while a two-dimensional(2D)FLC for the fan regulates the stack temperature near the reference value.The VG-GSTA is then introduced to eliminate steady-state errors,offering resistance to disturbances and minimizing control oscillations.The equilibrium optimizer is used to fine-tune VG-GSTA parameters.Co-simulation verifies the effectiveness of our method,demonstrating its advantages in terms of disturbance immunity,overshoot suppression,tracking accuracy and response speed.展开更多
Maintaining stable high temperatures under pressure remains a challenge in high-pressure,high-temperature experiments using multi-anvil presses(MAPs).Temperature fluctuations exceeding 10℃ at high pressures are commo...Maintaining stable high temperatures under pressure remains a challenge in high-pressure,high-temperature experiments using multi-anvil presses(MAPs).Temperature fluctuations exceeding 10℃ at high pressures are common and particularly problematic with LaCrO_(3) heaters,which can experience significant power fluctuations and even failure due to substantial resistance changes—an issue conventional thyristorcontrolled heating systems cannot effectively manage.To address this limitation,we have developed the Multi-Anvil Stable Temperature controller(MASTer),a high-performance heating system optimized for MAP experiments.MASTer enables precise,high-speed measurement of heating parameters and power output control,incorporating a gentle regulation strategy to enhance stability.It ensures consistent heating across various heater types,including LaCrO_(3),with power fluctuations limited to±0.1 W and temperature fluctuations to within±2℃ in most cases.The design,operating principles,user interface,functionality,and performance of the heating system are discussed in detail.展开更多
With the development of space-based remote sensing and deep space exploration technology,higher standards for temperature stability and uniformity of payloads have been proposed to spacecraft thermal control systems.A...With the development of space-based remote sensing and deep space exploration technology,higher standards for temperature stability and uniformity of payloads have been proposed to spacecraft thermal control systems.As an efficient two-phase heat transfer device with active temperature control capabilities,the loop heat pipe(LHP)can be widely applied in spacecraft thermal control systems to achieve reliable temperature control under various operating modes and complex space thermal environments.This paper analyzes the fundamental theories of thermal switch-controlled,reservoir temperature-controlled,and bypass valve-controlled LHPs.The focus is on the theories and methods of achieving high-precision and high-reliability temperature control via active reservoir temperature control.Novel control techniques in recent years,such as non-condensable gas(NCG)control with a temperature stability of 0.01℃ ,are also briefly introduced as promising approaches to improve LHP performance.The on-orbit performance and characteristics of various LHP temperature control methods are provided and ranked in terms of control precision,energy consumption,complexity,and weight.Thermoelectric cooler(TEC)/electrical heater,as the foundation of reservoir temperature control,can achieve a temperature stability of in space applications under±0.2℃ a wide range of heat load.Microgravity model,control strategy,and operating mode conversion are three optimization directions that would hopefully further expand the application scenario of reservoir temperature control.Specific design principles and challenges for corresponding directions are summarized as guidance for researchers.展开更多
Dividing wall batch distillation with middle vessel(DWBDM)is a new type of batch distillation column,with outstanding advantages of low capital cost,energy saving and flexible operation.However,temperature control of ...Dividing wall batch distillation with middle vessel(DWBDM)is a new type of batch distillation column,with outstanding advantages of low capital cost,energy saving and flexible operation.However,temperature control of DWBDM process is challenging,since inherently dynamic and highly nonlinear,which make it difficult to give the controller reasonable set value or optimal temperature profile for temperature control scheme.To overcome this obstacle,this study proposes a new strategy to develop temperature control scheme for DWBDM combining neural network soft-sensor with fuzzy control.Dynamic model of DWBDM was firstly developed and numerically solved by Python,with three control schemes:composition control by PID and fuzzy control respectively,and temperature control by fuzzy control with neural network soft-sensor.For dynamic process,the neural networks with memory functions,such as RNN,LSTM and GRU,are used to handle with time-series data.The results from a case example show that the new control scheme can perform a good temperature control of DWBDM with the same or even better product purities as traditional PID or fuzzy control,and fuzzy control could reduce the effect of prediction error from neural network,indicating that it is a highly feasible and effective control approach for DWBDM,and could even be extended to other dynamic processes.展开更多
The exploitation of oil resources has now extended to ultra-deep formations,with depths even exceeding 10,000 m.During drilling operations,the bottomhole temperature(BHT)can surpass 240℃.Under such high-temperature c...The exploitation of oil resources has now extended to ultra-deep formations,with depths even exceeding 10,000 m.During drilling operations,the bottomhole temperature(BHT)can surpass 240℃.Under such high-temperature conditions,measurement while drilling(MWD)instruments are highly likely to malfunction due to the inadequate temperature resistance of their electronic components.As a wellbore temperature control approach,the application of thermal insulated drill pipe(TIDP)has been proposed to manage the wellbore temperature in ultra-deep wells.This paper developed a temperature field model for ultra-deep wells by coupling the interactions of multiple factors on the wellbore temperature.For the first time,five distinct TIDP deployment methods were proposed,and their corresponding wellbo re temperature variation characte ristics were investigated,and the heat transfer laws of the ultra-deep wellbore-formation system were quantitatively elucidated.The results revealed that TIDP can effectively restrain the rapid rise in the temperature of the drilling fluid inside the drill string by reducing the heat flux of the drill string.Among the five deployment methods,the method of deploying TIDP from the bottomhole upwards exhibits the best performance.For a 12,000 m simulated well,when6000 m of TIDP are deployed from the bottomhole upwards,the BHT decreases by 52℃,while the outlet temperature increases by merely 1℃.This not only achieves the objective of wellbore temperature control but also keeps the temperature of the drilling fluid at the outlet of annulus at a relatively low level,thereby reducing the requirements for the heat exchange equipment on the ground.The novel findings of this study provide significant guidance for wellbore temperature control in ultra-deep and ultra-high-temperature wells.展开更多
Accurate skin temperature is one of the critical factors in successfully assimilating satellite radiance data over land.However,model-simulated skin temperature may not be accurate enough.To address this issue,an exte...Accurate skin temperature is one of the critical factors in successfully assimilating satellite radiance data over land.However,model-simulated skin temperature may not be accurate enough.To address this issue,an extended skin temperature control variable(TSCV) approach is proposed in a variational assimilation framework,which also considers the background error correlation between skin temperature and atmospheric variables.A series of single observation tests and a 10-day cycling assimilation experiment were conducted to evaluate the impact of the TSCV approach on the assimilation of AMSU-A and ATMS(Advanced Technology Microwave Sounder) microwave temperature-sounding channels over land.The results of the single observation tests show that by applying the TSCV approach,not only the direct analysis of skin temperature is realized,but also the interaction between skin temperature and atmospheric variables can be achieved during the assimilation process.The results of the cycling experiment demonstrate that the TSCV approach improves the skin temperature analysis,which in turn reduces the RMSE of the surface variables and low-level air temperature forecasts.The TSCV approach also reduces the difference between the observed and simulated brightness temperatures of both microwave and infrared window channels over land,suggesting that the approach can facilitate the radiance simulation of these channels,thus contributing to the assimilation of window channels.展开更多
NaCu_(0.2)Fe_(0.3)Mn_(0.5)O_(2) (NCFM) cathode material was synthesized using a simple solid-state reaction, and the effect of calcination temperature on its interlayer spacing and oxygen vacancies concentration was i...NaCu_(0.2)Fe_(0.3)Mn_(0.5)O_(2) (NCFM) cathode material was synthesized using a simple solid-state reaction, and the effect of calcination temperature on its interlayer spacing and oxygen vacancies concentration was investigated. Through electrochemical testing and material characterizations, higher calcination temperatures increase the electrostatic repulsion between oxygen atoms in adjacent layers, resulting in an expansion of Na layer spacing. This structural change enhances the diffusion kinetics of Na^(+), thereby significantly improving the rate performance of NCFM. Furthermore, elevated calcination temperatures facilitate the reduction of oxygen vacancies, leading to improved crystallinity. This enhancement in crystallinity mitigates structural strain during phase transitions, contributing to improved cyclic stability. Consequently, the optimized NCFM shows an initial discharge specific capacity of 143.3 mA·h/g at 0.1C, with a capacity retention rate of 79.28% after 100 cycles at 1C.展开更多
Temperature, as an important feature of hydroponic nutrient solution, is closely related to dissolved oxygen content of nutrient solution and growth status of plant roots. How to precisely adjust the temperature of nu...Temperature, as an important feature of hydroponic nutrient solution, is closely related to dissolved oxygen content of nutrient solution and growth status of plant roots. How to precisely adjust the temperature of nutrient solution is the key to obtain high quality and high yield of hydroponic vegetables over summer. With Lactuca sativa vat. crispa ＇Luosheng No.3＇ as the test material, the effect of chiller cooling technology on the temperature of nutrient solution, as well as on the yield and quality of Luosheng No.3, in over-summer hydroponic cultivation was studied. The results showed that the chiller cooling technology controlled the nutrient solution temperature in a reasonable range （（20 ± 1）℃） and promoted the growth and dry matter accumulation of Luosheng No.3, instead of affecting the quality. In short, the chiller cooling technology is applicable to the temperature regulation of nutrient solu- tion in hydroponics over summer.展开更多
In order to incorporate the decision maker＇s preference into multiobjective optimization a preference-based multiobjective artificial bee colony algorithm PMABCA is proposed.In the proposed algorithm a novel referenc...In order to incorporate the decision maker＇s preference into multiobjective optimization a preference-based multiobjective artificial bee colony algorithm PMABCA is proposed.In the proposed algorithm a novel reference point based preference expression method is addressed.The fitness assignment function is defined based on the nondominated rank and the newly defined preference distance.An archive set is introduced for saving the nondominated solutions and an improved crowding-distance operator is addressed to remove the extra solutions in the archive.The experimental results of two benchmark test functions show that a preferred set of solutions and some other non-preference solutions are achieved simultaneously.The simulation results of the proportional-integral-derivative PID parameter optimization for superheated steam temperature verify that the PMABCA is efficient in aiding to making a reasonable decision.展开更多
Methods to optimize the production of gamma-aminobutyric acid （GABA） by Lactobacillus brevis CGMCC 1306 were investigated. Results indicated that cell growth was maximal at pH 5.0, while pH 4.5 was pref-erable to GA...Methods to optimize the production of gamma-aminobutyric acid （GABA） by Lactobacillus brevis CGMCC 1306 were investigated. Results indicated that cell growth was maximal at pH 5.0, while pH 4.5 was pref-erable to GABA formation. The optimal temperature for cell growth （35 °C） was lower than that for GABA forma-tion （40 °C）. In a two-stage pH and temperature control fermentation, cultures were maintained at pH 5.0 and 35 °C for 32 h, then adjusted to pH 4.5 and 40 °C, GABA production increased remarkably and reached 474.79 mmol·L-1 at 72 h, while it was 398.63 mmol·L-1 with one stage pH and temperature control process, in which cultivation con-ditions were constantly controlled at pH 5.0 and 35 °C. In order to avoid the inhibition of cell growth at higher L-monosodium glutamate （L-MSG） concentrations, the two-stage control fermentation with substrate feeding strat-egy was applied to GABA production, with 106.87 mmol （20 g） L-MSG supplemented into the shaking-flask at 32 h and 56 h post-inoculation separately. The GABA concentration reached 526.33 mmol·L-1 at 72 h with the fer-mentation volume increased by 38%. These results will provide primary data to realize large-scale production of GABA by L. brevis CGMCC 1306.展开更多
It is important and difficult to control the temperature of mass concrete structure during high arch dam construction.A new method with decision support system is presented for temperature control and crack prevention...It is important and difficult to control the temperature of mass concrete structure during high arch dam construction.A new method with decision support system is presented for temperature control and crack prevention.It is a database system with functions of data storage,information inquiry,data analysis,early warning and resource sharing.Monitoring information during construction can be digitized via this system,and the intelligent analysis and dynamic control of concrete temperature can be conducted.This method has been applied in the construction of the Dagangshan Arch Dam in China and has proven to be very convenient.Based on the decision support of this system and the dynamic adjustment of construction measures,the concrete temperature of this project is well-controlled.展开更多
A dynamic thermal transfer model of a proton exchange membrane fuel cell (PEMFC) stack is developed based on energy conservation in order to reach better temperature control of PEMFC stack. Considering its uncertain p...A dynamic thermal transfer model of a proton exchange membrane fuel cell (PEMFC) stack is developed based on energy conservation in order to reach better temperature control of PEMFC stack. Considering its uncertain parameters and disturbance, we propose a robust adaptive controller based on backstepping algorithm of Lyaponov function. Numerical simulations indicate the validity of the proposed controller.展开更多
A three-dimensional finite element program for thermal analysis of hydration heat in concrete structures with a plastic pipe cooling system is introduced in this paper. The program was applied to simulation of the tem...A three-dimensional finite element program for thermal analysis of hydration heat in concrete structures with a plastic pipe cooling system is introduced in this paper. The program was applied to simulation of the temperature and stress field of the Cao＇e Sluice during the construction period. From the calculated results, we can find that the temperaiure and stress of concrete cooled with plastic pipes are much lower than those of concrete without pipes. Moreover, plastic pipes could not be corroded by seawater. That is to say, a good effect of temperature control and cracking prevention can be achieved, which provides a useful reference for other similar nearshore concrete projects.展开更多
The dividing wall column （DWC） is considered as a major breakthrough in distillation technology and has good prospect of industrialization. Model predictive control （MPC） is an advanced control strategy that has a...The dividing wall column （DWC） is considered as a major breakthrough in distillation technology and has good prospect of industrialization. Model predictive control （MPC） is an advanced control strategy that has acquired extensive applications in various industries. In this study, MPC is applied to the process for separating ethanol, n-propanol, and n-butanol ternary mixture in a fully thermally coupled DWC. Both composition control and tem- perature inferent/al control are considered. The multiobjective genetic algor/thm function ＂gamult/obj＂ in Matlab is used for the weight tuning of MPC. Comparisons are made between the control performances of MPC and PI strategies. Simulation results show that although both MPC and PI schemes can stabilize the DWC in case of feed disturbances, MPC generally behaves better than the PI strategy for both composition control and tempera- ture inferential control, resulting in a more stable and superior performance with lower values of integral of squared error （ISE）.展开更多
The sheet size of a graphene oxide （GO） can greatly influence its electrical, optical, mechanical, electrochemical and catalytic property. It is a key challenge to how to control the sheet size during its preparatio...The sheet size of a graphene oxide （GO） can greatly influence its electrical, optical, mechanical, electrochemical and catalytic property. It is a key challenge to how to control the sheet size during its preparation in different application fields. According to our previous theoretical calculations of the effect of temperature on the oxidation process of graphene, we use Hummers method to prepare GOs with different sheet sizes by simply controlling the temperature condition in the process of the oxidation reaction of potassium permanganate （KMnO4） with graphene and the dilution process with deionized water. The results detected by transmission electron microscopy （TEM） and atomic force microscopy （AFM） show that the average sizes of GO sheets prepared at different temperatures are about 1 μm and 7 μm respectively. The ultraviolet-visible spectroscopy （UV-vis） shows that lower temperature can lead to smaller oxidation degrees of GO and less oxygen functional groups on the surface. In addition, we prepare GO membranes to test their mechanical strengths by ultrasonic waves, and we find that the strengths of the GO membranes prepared under low temperatures are considerably higher than those prepared under high temperatures, showing the high mechanical strengths of larger GO sheets. Our experimental results testify our previous theoretical calculations. Compared with the traditional centrifugal separation and chemical cutting method, the preparation process of GO by temperature control is simple and low-cost and also enables large-size synthesis. These findings develop a new method to control GO sheet sizes for large-scale potential applications.展开更多
The development of high temperature phase change materials(PCMs)with great comprehensive performance is significant in the future thermal energy storage system.In this study,novel and durable Al-Si/Al_(2)O_(3)-Al N co...The development of high temperature phase change materials(PCMs)with great comprehensive performance is significant in the future thermal energy storage system.In this study,novel and durable Al-Si/Al_(2)O_(3)-Al N composite PCMs with controllable melting temperature were successfully synthesized by using pristine Al powder as raw material and tetraethyl orthosilicate as SiO_(2)source.The Al_(2)O_(3)shell and Al-Si alloy were in-situ produced via the substitution reaction between molten Al and SiO_(2).Importantly,the crack caused by the incomplete encapsulation of the Al_(2)O_(3)shell could repair itself by the nitridation reaction of internal molten Al and thereby forming a highly dense Al_(2)O_(3)-Al N composite shell.The produced dense Al_(2)O_(3)-Al N composite shell could significantly improve the thermal cycling stability of composite PCMs,and thus,the thermal storage density decrease of the Al-Si/Al_(2)O_(3)-Al N(59.8 J/g to77.7 J/g)was far less than that of the Al-Si/Al_(2)O_(3)(118.5 J/g)after 3000 thermal cycles.Moreover,the synthesized Al-Si/Al_(2)O_(3)-Al N still exhibited a controllable melting temperature(571.5-637.9℃),relatively high thermal storage density(105.6-150.7 J/g),great dimensional stability and structural stability after3000 thermal cycles.Hence,the synthesized Al-Si/Al_(2)O_(3)-Al N composite PCMs,as promising preferential thermal energy storage materials,can be stably used in the energy utilization efficiency improvement of various systems for more than 6 years.展开更多
A soil temperature control system was designed for sapling study in alpine region and tested in summer, 2009. The system consisted of a power switch, voltage regulator, microcomputer timer, safety relays, temperature ...A soil temperature control system was designed for sapling study in alpine region and tested in summer, 2009. The system consisted of a power switch, voltage regulator, microcomputer timer, safety relays, temperature control device, temperature sensors, heating cables, fireproofing plastic pipes (PVC), 108 heavy-duty plastic containers and seedlings. The heating cables were held in six 2-layer PVC frames with 25 cm wide, 320 cm long and 25 cm high and three 1-layer frames with 25 cm wide and 320 cm long for 15°C soil temperature treatment, half of the 2-layer frames were used for 20°C and 25°C soil temperature treatments, respectively. Each of the frames was installed at each of ditches with 30 cm wide, 330 cm long and 30 cm deep in size. 12 seedling containers with 20 cm top diameter, 18cm bottom diameter and 25 cm high were homogenously placed at each of the ditches, and spaces between the containers were filled with natural soil. The system was economic, and could increase soil temperatures obviously and uniformly, the maximal and minimal standard errors of soil temperatures were ±0.28 and ±0.05°C at 10cm depth in the containers within each of all the ditches. In the system, aboveground environment was natural, diurnal and monthly soil temperatures varied with changing air temperature, the research results may be better to know the eco-physiological and growth responses of alpine saplings/seedlings to soil warming than that in greenhouse, laboratory, infrared heat lamp and open top chamber.展开更多
A novel temperature controlled ionic liquid dispersive liquid phase microextracfion （TCIL-DLPME） coupled with rapid resolution liquid chromatography-electrospray tandem mass spectrometry （RRLC-ESI-MS-MS） has been ...A novel temperature controlled ionic liquid dispersive liquid phase microextracfion （TCIL-DLPME） coupled with rapid resolution liquid chromatography-electrospray tandem mass spectrometry （RRLC-ESI-MS-MS） has been developed for the enrichment and determination of three hexabromocyclododecane diastereomers （HBCDs） in water samples. Green solvent ionic liquid （IL） was used as extraction solvent instead of toxic organic solvents. This technique also avoided the usage of dispersive solvent. Some important parameters that might affect the extraction efficiency were optimized. Under the optimum conditions, good linear relationship, sensitivity and reproducibility were obtained. All the limits of detection for the three diastereomers were 0.1 ng/ mL. The linear range was obtained in the range of 1-100 ng/mL for the total amount of three HBCD diastereomers. It was satisfactory to analyze real environmental water samples with the recoveries ranging from 77.2% to 99.3%. The main advantage of the method is toxic organic solvent-free.展开更多
Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern microelectronics.However,this inevitably exac-erbates the inhomogeneity ...Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern microelectronics.However,this inevitably exac-erbates the inhomogeneity of temperature distribution in microsystems,making precise temperature control for electronic components extremely challenging.Herein,we report an on-chip micro temperature controller including a pair of thermoelectric legs with a total area of 50×50μm^(2),which are fabricated from dense and flat freestanding Bi2Te3-based ther-moelectric nano films deposited on a newly developed nano graphene oxide membrane substrate.Its tunable equivalent thermal resistance is controlled by electrical currents to achieve energy-efficient temperature control for low-power electronics.A large cooling temperature difference of 44.5 K at 380 K is achieved with a power consumption of only 445μW,resulting in an ultrahigh temperature control capability over 100 K mW^(-1).Moreover,an ultra-fast cooling rate exceeding 2000 K s^(-1) and excellent reliability of up to 1 million cycles are observed.Our proposed on-chip temperature controller is expected to enable further miniaturization and multifunctional integration on a single chip for microelectronics.展开更多
基金supported by the National Key Research and Development Program of China(No.2022YFC2204400)。
文摘This paper introduces a small perturbation frequency domain thermal analysis model based on the nonlinear dynamics model.The model can be applied to study the high-precision temperature control of thermal systems under low-frequency complex perturbations.The frequency domain characteristics of the space gravitational wave detection satellite are analyzed,and a multi-channel perturbation structure is established.The effects of three kinds of heat flow perturbations,including external heat flow,power generation power,and waste heat of electronic equipment,on the temperature through five transfer paths are investigated.It has been discovered that the waste heat from electronic equipment inside the satellite has the most noticeable effect on the temperature power spectral density of temperature-sensitive optical loads,serving as the primary factor influencing thermal stability.For complex noise signals,the small perturbation analysis method can decompose the different frequency components or ranges,reducing the problem to linearized analysis and simplifying complex calculations.The results indicate that the temperature power spectral density decreases as signal frequency increases,with low-frequency signals exerting a greater influence on temperature stability.The small perturbation analysis method is a novel and effective method for temperature control of space thermal systems,with high accuracy and stability.
基金Supported by the Major Science and Technology Project of Jilin Province(20220301010GX)the International Scientific and Technological Cooperation(20240402071GH).
文摘The liquid cooling system(LCS)of fuel cells is challenged by significant time delays,model uncertainties,pump and fan coupling,and frequent disturbances,leading to overshoot and control oscillations that degrade temperature regulation performance.To address these challenges,we propose a composite control scheme combining fuzzy logic and a variable-gain generalized supertwisting algorithm(VG-GSTA).Firstly,a one-dimensional(1D)fuzzy logic controler(FLC)for the pump ensures stable coolant flow,while a two-dimensional(2D)FLC for the fan regulates the stack temperature near the reference value.The VG-GSTA is then introduced to eliminate steady-state errors,offering resistance to disturbances and minimizing control oscillations.The equilibrium optimizer is used to fine-tune VG-GSTA parameters.Co-simulation verifies the effectiveness of our method,demonstrating its advantages in terms of disturbance immunity,overshoot suppression,tracking accuracy and response speed.
基金supported by the National Science Fund for Distinguished Young Scholars(Grant No.T2225027)the National Key R&D Program of China(Grant No.2023YFA1608902).
文摘Maintaining stable high temperatures under pressure remains a challenge in high-pressure,high-temperature experiments using multi-anvil presses(MAPs).Temperature fluctuations exceeding 10℃ at high pressures are common and particularly problematic with LaCrO_(3) heaters,which can experience significant power fluctuations and even failure due to substantial resistance changes—an issue conventional thyristorcontrolled heating systems cannot effectively manage.To address this limitation,we have developed the Multi-Anvil Stable Temperature controller(MASTer),a high-performance heating system optimized for MAP experiments.MASTer enables precise,high-speed measurement of heating parameters and power output control,incorporating a gentle regulation strategy to enhance stability.It ensures consistent heating across various heater types,including LaCrO_(3),with power fluctuations limited to±0.1 W and temperature fluctuations to within±2℃ in most cases.The design,operating principles,user interface,functionality,and performance of the heating system are discussed in detail.
基金funded by National Outstanding Youth Foundation of China,grant number 2020-JCJQ-ZQ-042.
文摘With the development of space-based remote sensing and deep space exploration technology,higher standards for temperature stability and uniformity of payloads have been proposed to spacecraft thermal control systems.As an efficient two-phase heat transfer device with active temperature control capabilities,the loop heat pipe(LHP)can be widely applied in spacecraft thermal control systems to achieve reliable temperature control under various operating modes and complex space thermal environments.This paper analyzes the fundamental theories of thermal switch-controlled,reservoir temperature-controlled,and bypass valve-controlled LHPs.The focus is on the theories and methods of achieving high-precision and high-reliability temperature control via active reservoir temperature control.Novel control techniques in recent years,such as non-condensable gas(NCG)control with a temperature stability of 0.01℃ ,are also briefly introduced as promising approaches to improve LHP performance.The on-orbit performance and characteristics of various LHP temperature control methods are provided and ranked in terms of control precision,energy consumption,complexity,and weight.Thermoelectric cooler(TEC)/electrical heater,as the foundation of reservoir temperature control,can achieve a temperature stability of in space applications under±0.2℃ a wide range of heat load.Microgravity model,control strategy,and operating mode conversion are three optimization directions that would hopefully further expand the application scenario of reservoir temperature control.Specific design principles and challenges for corresponding directions are summarized as guidance for researchers.
基金supported by Beijing Natural Science Foundation(2222037)the Special Educating Project of the Talent for Carbon Peak and Carbon Neutrality of University of Chinese Academy of Sciences(Innovation of talent cultivation model for“dual carbon”in chemical engineering industry,E3E56501A2).
文摘Dividing wall batch distillation with middle vessel(DWBDM)is a new type of batch distillation column,with outstanding advantages of low capital cost,energy saving and flexible operation.However,temperature control of DWBDM process is challenging,since inherently dynamic and highly nonlinear,which make it difficult to give the controller reasonable set value or optimal temperature profile for temperature control scheme.To overcome this obstacle,this study proposes a new strategy to develop temperature control scheme for DWBDM combining neural network soft-sensor with fuzzy control.Dynamic model of DWBDM was firstly developed and numerically solved by Python,with three control schemes:composition control by PID and fuzzy control respectively,and temperature control by fuzzy control with neural network soft-sensor.For dynamic process,the neural networks with memory functions,such as RNN,LSTM and GRU,are used to handle with time-series data.The results from a case example show that the new control scheme can perform a good temperature control of DWBDM with the same or even better product purities as traditional PID or fuzzy control,and fuzzy control could reduce the effect of prediction error from neural network,indicating that it is a highly feasible and effective control approach for DWBDM,and could even be extended to other dynamic processes.
基金supported by the National Natural Science Foundation of China(Grant No.U22B2072)Research Project of China Petroleum Science and Technology Innovation Fund(Grant No.2025DQ02-0144)。
文摘The exploitation of oil resources has now extended to ultra-deep formations,with depths even exceeding 10,000 m.During drilling operations,the bottomhole temperature(BHT)can surpass 240℃.Under such high-temperature conditions,measurement while drilling(MWD)instruments are highly likely to malfunction due to the inadequate temperature resistance of their electronic components.As a wellbore temperature control approach,the application of thermal insulated drill pipe(TIDP)has been proposed to manage the wellbore temperature in ultra-deep wells.This paper developed a temperature field model for ultra-deep wells by coupling the interactions of multiple factors on the wellbore temperature.For the first time,five distinct TIDP deployment methods were proposed,and their corresponding wellbo re temperature variation characte ristics were investigated,and the heat transfer laws of the ultra-deep wellbore-formation system were quantitatively elucidated.The results revealed that TIDP can effectively restrain the rapid rise in the temperature of the drilling fluid inside the drill string by reducing the heat flux of the drill string.Among the five deployment methods,the method of deploying TIDP from the bottomhole upwards exhibits the best performance.For a 12,000 m simulated well,when6000 m of TIDP are deployed from the bottomhole upwards,the BHT decreases by 52℃,while the outlet temperature increases by merely 1℃.This not only achieves the objective of wellbore temperature control but also keeps the temperature of the drilling fluid at the outlet of annulus at a relatively low level,thereby reducing the requirements for the heat exchange equipment on the ground.The novel findings of this study provide significant guidance for wellbore temperature control in ultra-deep and ultra-high-temperature wells.
基金sponsored by the National Natural Science Foundation of China(Grant No.42075148)the High-Performance Computing Center of Nanjing University of Information Science & Technology for supporting this work。
文摘Accurate skin temperature is one of the critical factors in successfully assimilating satellite radiance data over land.However,model-simulated skin temperature may not be accurate enough.To address this issue,an extended skin temperature control variable(TSCV) approach is proposed in a variational assimilation framework,which also considers the background error correlation between skin temperature and atmospheric variables.A series of single observation tests and a 10-day cycling assimilation experiment were conducted to evaluate the impact of the TSCV approach on the assimilation of AMSU-A and ATMS(Advanced Technology Microwave Sounder) microwave temperature-sounding channels over land.The results of the single observation tests show that by applying the TSCV approach,not only the direct analysis of skin temperature is realized,but also the interaction between skin temperature and atmospheric variables can be achieved during the assimilation process.The results of the cycling experiment demonstrate that the TSCV approach improves the skin temperature analysis,which in turn reduces the RMSE of the surface variables and low-level air temperature forecasts.The TSCV approach also reduces the difference between the observed and simulated brightness temperatures of both microwave and infrared window channels over land,suggesting that the approach can facilitate the radiance simulation of these channels,thus contributing to the assimilation of window channels.
基金supported by the National Natural Science Foundation of China(No.12175089)the Key Research and Development Program of Yunnan Province,China(No.202103AF140006)+2 种基金Basic Research Programs of Yunnan Provincial Science and Technology Department,China(Nos.202001AW070004,202301AS070051,202401AV070008)Yunnan Industrial Innovative Talents Program for“Xingdian Talent Support Plan”,China(No.KKXY202252001)Yunnan Major Scientific and Technological Projects,China(No.202202AG050003)。
文摘NaCu_(0.2)Fe_(0.3)Mn_(0.5)O_(2) (NCFM) cathode material was synthesized using a simple solid-state reaction, and the effect of calcination temperature on its interlayer spacing and oxygen vacancies concentration was investigated. Through electrochemical testing and material characterizations, higher calcination temperatures increase the electrostatic repulsion between oxygen atoms in adjacent layers, resulting in an expansion of Na layer spacing. This structural change enhances the diffusion kinetics of Na^(+), thereby significantly improving the rate performance of NCFM. Furthermore, elevated calcination temperatures facilitate the reduction of oxygen vacancies, leading to improved crystallinity. This enhancement in crystallinity mitigates structural strain during phase transitions, contributing to improved cyclic stability. Consequently, the optimized NCFM shows an initial discharge specific capacity of 143.3 mA·h/g at 0.1C, with a capacity retention rate of 79.28% after 100 cycles at 1C.
基金Supported by Science and Technology Innovative Leading Fund of Ningxia Academy of Agriculture and Forestry Sciences(NKYZ-16-1101)~~
文摘Temperature, as an important feature of hydroponic nutrient solution, is closely related to dissolved oxygen content of nutrient solution and growth status of plant roots. How to precisely adjust the temperature of nutrient solution is the key to obtain high quality and high yield of hydroponic vegetables over summer. With Lactuca sativa vat. crispa ＇Luosheng No.3＇ as the test material, the effect of chiller cooling technology on the temperature of nutrient solution, as well as on the yield and quality of Luosheng No.3, in over-summer hydroponic cultivation was studied. The results showed that the chiller cooling technology controlled the nutrient solution temperature in a reasonable range （（20 ± 1）℃） and promoted the growth and dry matter accumulation of Luosheng No.3, instead of affecting the quality. In short, the chiller cooling technology is applicable to the temperature regulation of nutrient solu- tion in hydroponics over summer.
基金The National Natural Science Foundation of China(No.51306082,51476027)
文摘In order to incorporate the decision maker＇s preference into multiobjective optimization a preference-based multiobjective artificial bee colony algorithm PMABCA is proposed.In the proposed algorithm a novel reference point based preference expression method is addressed.The fitness assignment function is defined based on the nondominated rank and the newly defined preference distance.An archive set is introduced for saving the nondominated solutions and an improved crowding-distance operator is addressed to remove the extra solutions in the archive.The experimental results of two benchmark test functions show that a preferred set of solutions and some other non-preference solutions are achieved simultaneously.The simulation results of the proportional-integral-derivative PID parameter optimization for superheated steam temperature verify that the PMABCA is efficient in aiding to making a reasonable decision.
基金Supported by the National＇Naturai Science Foundation of China （30970638, 21176220 and 31240054）, Zhejiang Provincial Natural Science Foundation （Z13B06008） and the National Basic Research Program of China （2007CB714305）.
文摘Methods to optimize the production of gamma-aminobutyric acid （GABA） by Lactobacillus brevis CGMCC 1306 were investigated. Results indicated that cell growth was maximal at pH 5.0, while pH 4.5 was pref-erable to GABA formation. The optimal temperature for cell growth （35 °C） was lower than that for GABA forma-tion （40 °C）. In a two-stage pH and temperature control fermentation, cultures were maintained at pH 5.0 and 35 °C for 32 h, then adjusted to pH 4.5 and 40 °C, GABA production increased remarkably and reached 474.79 mmol·L-1 at 72 h, while it was 398.63 mmol·L-1 with one stage pH and temperature control process, in which cultivation con-ditions were constantly controlled at pH 5.0 and 35 °C. In order to avoid the inhibition of cell growth at higher L-monosodium glutamate （L-MSG） concentrations, the two-stage control fermentation with substrate feeding strat-egy was applied to GABA production, with 106.87 mmol （20 g） L-MSG supplemented into the shaking-flask at 32 h and 56 h post-inoculation separately. The GABA concentration reached 526.33 mmol·L-1 at 72 h with the fer-mentation volume increased by 38%. These results will provide primary data to realize large-scale production of GABA by L. brevis CGMCC 1306.
基金Supported by the National Natural Science Foundation of China(No.50909078)the National Basic Research Program of China("973"Program,No.2013CB035900)
文摘It is important and difficult to control the temperature of mass concrete structure during high arch dam construction.A new method with decision support system is presented for temperature control and crack prevention.It is a database system with functions of data storage,information inquiry,data analysis,early warning and resource sharing.Monitoring information during construction can be digitized via this system,and the intelligent analysis and dynamic control of concrete temperature can be conducted.This method has been applied in the construction of the Dagangshan Arch Dam in China and has proven to be very convenient.Based on the decision support of this system and the dynamic adjustment of construction measures,the concrete temperature of this project is well-controlled.
文摘A dynamic thermal transfer model of a proton exchange membrane fuel cell (PEMFC) stack is developed based on energy conservation in order to reach better temperature control of PEMFC stack. Considering its uncertain parameters and disturbance, we propose a robust adaptive controller based on backstepping algorithm of Lyaponov function. Numerical simulations indicate the validity of the proposed controller.
基金supported by the National Natural Science Foundation of China (Grant No. 50779010)
文摘A three-dimensional finite element program for thermal analysis of hydration heat in concrete structures with a plastic pipe cooling system is introduced in this paper. The program was applied to simulation of the temperature and stress field of the Cao＇e Sluice during the construction period. From the calculated results, we can find that the temperaiure and stress of concrete cooled with plastic pipes are much lower than those of concrete without pipes. Moreover, plastic pipes could not be corroded by seawater. That is to say, a good effect of temperature control and cracking prevention can be achieved, which provides a useful reference for other similar nearshore concrete projects.
基金Supported by the National Natural Science Foundation of China(21676299,21476261and 21606255)
文摘The dividing wall column （DWC） is considered as a major breakthrough in distillation technology and has good prospect of industrialization. Model predictive control （MPC） is an advanced control strategy that has acquired extensive applications in various industries. In this study, MPC is applied to the process for separating ethanol, n-propanol, and n-butanol ternary mixture in a fully thermally coupled DWC. Both composition control and tem- perature inferent/al control are considered. The multiobjective genetic algor/thm function ＂gamult/obj＂ in Matlab is used for the weight tuning of MPC. Comparisons are made between the control performances of MPC and PI strategies. Simulation results show that although both MPC and PI schemes can stabilize the DWC in case of feed disturbances, MPC generally behaves better than the PI strategy for both composition control and tempera- ture inferential control, resulting in a more stable and superior performance with lower values of integral of squared error （ISE）.
基金supported by the National Natural Science Foundation of China(Grant Nos.41473090,41430644,11675098,41373098,41430644,and 21490585)
文摘The sheet size of a graphene oxide （GO） can greatly influence its electrical, optical, mechanical, electrochemical and catalytic property. It is a key challenge to how to control the sheet size during its preparation in different application fields. According to our previous theoretical calculations of the effect of temperature on the oxidation process of graphene, we use Hummers method to prepare GOs with different sheet sizes by simply controlling the temperature condition in the process of the oxidation reaction of potassium permanganate （KMnO4） with graphene and the dilution process with deionized water. The results detected by transmission electron microscopy （TEM） and atomic force microscopy （AFM） show that the average sizes of GO sheets prepared at different temperatures are about 1 μm and 7 μm respectively. The ultraviolet-visible spectroscopy （UV-vis） shows that lower temperature can lead to smaller oxidation degrees of GO and less oxygen functional groups on the surface. In addition, we prepare GO membranes to test their mechanical strengths by ultrasonic waves, and we find that the strengths of the GO membranes prepared under low temperatures are considerably higher than those prepared under high temperatures, showing the high mechanical strengths of larger GO sheets. Our experimental results testify our previous theoretical calculations. Compared with the traditional centrifugal separation and chemical cutting method, the preparation process of GO by temperature control is simple and low-cost and also enables large-size synthesis. These findings develop a new method to control GO sheet sizes for large-scale potential applications.
基金financially supported by the National Natural Science Foundation of China(No.51771158)the Development and Reform Commission of Shenzhen Municipality(No.ZX20190229)。
文摘The development of high temperature phase change materials(PCMs)with great comprehensive performance is significant in the future thermal energy storage system.In this study,novel and durable Al-Si/Al_(2)O_(3)-Al N composite PCMs with controllable melting temperature were successfully synthesized by using pristine Al powder as raw material and tetraethyl orthosilicate as SiO_(2)source.The Al_(2)O_(3)shell and Al-Si alloy were in-situ produced via the substitution reaction between molten Al and SiO_(2).Importantly,the crack caused by the incomplete encapsulation of the Al_(2)O_(3)shell could repair itself by the nitridation reaction of internal molten Al and thereby forming a highly dense Al_(2)O_(3)-Al N composite shell.The produced dense Al_(2)O_(3)-Al N composite shell could significantly improve the thermal cycling stability of composite PCMs,and thus,the thermal storage density decrease of the Al-Si/Al_(2)O_(3)-Al N(59.8 J/g to77.7 J/g)was far less than that of the Al-Si/Al_(2)O_(3)(118.5 J/g)after 3000 thermal cycles.Moreover,the synthesized Al-Si/Al_(2)O_(3)-Al N still exhibited a controllable melting temperature(571.5-637.9℃),relatively high thermal storage density(105.6-150.7 J/g),great dimensional stability and structural stability after3000 thermal cycles.Hence,the synthesized Al-Si/Al_(2)O_(3)-Al N composite PCMs,as promising preferential thermal energy storage materials,can be stably used in the energy utilization efficiency improvement of various systems for more than 6 years.
基金supported by the National Natural Science Foundation of China (Grant No. 30872000 and 41071203)partially supported by the Project of Knowledge Innovation, Chinese Academy of Sciences (No. KZXZ-YW-33)Sichuan Foundation of Excellent Young Scientists (No. 2010JQ0026)
文摘A soil temperature control system was designed for sapling study in alpine region and tested in summer, 2009. The system consisted of a power switch, voltage regulator, microcomputer timer, safety relays, temperature control device, temperature sensors, heating cables, fireproofing plastic pipes (PVC), 108 heavy-duty plastic containers and seedlings. The heating cables were held in six 2-layer PVC frames with 25 cm wide, 320 cm long and 25 cm high and three 1-layer frames with 25 cm wide and 320 cm long for 15°C soil temperature treatment, half of the 2-layer frames were used for 20°C and 25°C soil temperature treatments, respectively. Each of the frames was installed at each of ditches with 30 cm wide, 330 cm long and 30 cm deep in size. 12 seedling containers with 20 cm top diameter, 18cm bottom diameter and 25 cm high were homogenously placed at each of the ditches, and spaces between the containers were filled with natural soil. The system was economic, and could increase soil temperatures obviously and uniformly, the maximal and minimal standard errors of soil temperatures were ±0.28 and ±0.05°C at 10cm depth in the containers within each of all the ditches. In the system, aboveground environment was natural, diurnal and monthly soil temperatures varied with changing air temperature, the research results may be better to know the eco-physiological and growth responses of alpine saplings/seedlings to soil warming than that in greenhouse, laboratory, infrared heat lamp and open top chamber.
基金financially supported by National Water Pollution Control and Management Technology Major Projects(No.2009ZX07210-009)Scientific and Technological Developing Project of Shandong Province(No. 2009GG20001021-9)+1 种基金Open Research Fund Program of Shandong Provincial Key Laboratory of Eco-Environmental Science for Yellow River Delta(No.2009KFJJ01)Basic Foundation of Shandong Academy of Sciences and Analysis and Test center of Shandong province
文摘A novel temperature controlled ionic liquid dispersive liquid phase microextracfion （TCIL-DLPME） coupled with rapid resolution liquid chromatography-electrospray tandem mass spectrometry （RRLC-ESI-MS-MS） has been developed for the enrichment and determination of three hexabromocyclododecane diastereomers （HBCDs） in water samples. Green solvent ionic liquid （IL） was used as extraction solvent instead of toxic organic solvents. This technique also avoided the usage of dispersive solvent. Some important parameters that might affect the extraction efficiency were optimized. Under the optimum conditions, good linear relationship, sensitivity and reproducibility were obtained. All the limits of detection for the three diastereomers were 0.1 ng/ mL. The linear range was obtained in the range of 1-100 ng/mL for the total amount of three HBCD diastereomers. It was satisfactory to analyze real environmental water samples with the recoveries ranging from 77.2% to 99.3%. The main advantage of the method is toxic organic solvent-free.
基金The authors thank D.Berger,D.Hofmann and C.Kupka in IFW Dresden for helpful technical support.H.R.acknowledges funding from the DFG(Deutsche Forschungsgemeinschaft)within grant number RE3973/1-1.Q.J.,H.R.and K.N.conceived the work.With the support from N.Y.and X.J.,Q.J.and T.G.fabricated the thermoelectric films and conducted the structural and compositional characterizations.Q.J.prepared microchips and fabricated the on-chip micro temperature controllers.Q.J.and N.P.carried out the temperature-dependent material and device performance measurements.Q.J.and H.R.performed the simulation and analytical calculations.Q.J.,H.R.and K.N.wrote the manuscript with input from the other coauthors.All the authors discussed the results and commented on the manuscript.
文摘Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern microelectronics.However,this inevitably exac-erbates the inhomogeneity of temperature distribution in microsystems,making precise temperature control for electronic components extremely challenging.Herein,we report an on-chip micro temperature controller including a pair of thermoelectric legs with a total area of 50×50μm^(2),which are fabricated from dense and flat freestanding Bi2Te3-based ther-moelectric nano films deposited on a newly developed nano graphene oxide membrane substrate.Its tunable equivalent thermal resistance is controlled by electrical currents to achieve energy-efficient temperature control for low-power electronics.A large cooling temperature difference of 44.5 K at 380 K is achieved with a power consumption of only 445μW,resulting in an ultrahigh temperature control capability over 100 K mW^(-1).Moreover,an ultra-fast cooling rate exceeding 2000 K s^(-1) and excellent reliability of up to 1 million cycles are observed.Our proposed on-chip temperature controller is expected to enable further miniaturization and multifunctional integration on a single chip for microelectronics.
