期刊文献+
共找到1,267篇文章
< 1 2 64 >
每页显示 20 50 100
Attractor-Based Simultaneous Design of the Minimum Set of Control Nodes and Controllers in Boolean Networks
1
作者 Koichi Kobayashi 《Applied Mathematics》 2016年第14期1510-1520,共11页
Design of control strategies for gene regulatory networks is a challenging and important topic in systems biology. In this paper, the problem of finding both a minimum set of control nodes (control inputs) and a contr... Design of control strategies for gene regulatory networks is a challenging and important topic in systems biology. In this paper, the problem of finding both a minimum set of control nodes (control inputs) and a controller is studied. A control node corresponds to a gene that expression can be controlled. Here, a Boolean network is used as a model of gene regulatory networks, and control specifications on attractors, which represent cell types or states of cells, are imposed. It is important to design a gene regulatory network that has desired attractors and has no undesired attractors. Using a matrix-based representation of BNs, this problem can be rewritten as an integer linear programming problem. Finally, the proposed method is demonstrated by a numerical example on a WNT5A network, which is related to melanoma. 展开更多
关键词 Boolean Networks Integer Linear Programming Minimum Set of control nodes Singleton Attractors
在线阅读 下载PDF
One-to-Any Command and Control Model:Precisely Coordinated Operation on Uncooperative Controlled Nodes 被引量:1
2
作者 QIU Han LI Yufeng +1 位作者 LI Heshuai ZHU Junhu 《Wuhan University Journal of Natural Sciences》 CAS CSCD 2015年第6期490-498,共9页
New precisely cooperative attacks, such as the coordi- nated cross plane session termination (CXPST) attack, need thou- sands upon thousands machines to attack diverse selected links simultaneously with the given ra... New precisely cooperative attacks, such as the coordi- nated cross plane session termination (CXPST) attack, need thou- sands upon thousands machines to attack diverse selected links simultaneously with the given rate. However, almost all command and control(C&C) mechanisms only provide publishing one com- mand to the whole once, so-called one-to-all C&C model, and are not productive to support CXPST-alike attacks. In this paper, we present one-to-any C&C model on coordination among the unco- operative controlled nodes. As an instance of one-to-any C&C model, directional command publishing (DCP) mechanism lever- aging on Kademlia is provided with a range-mapping key creating algorithm for commands to compute the publishing range and a statistically stochastic node querying scheme to obtain the com- mands immediately. With theoretical analysis and simulation, it is indicated that one-to-any C&C model fits for precisely coordi- nated operation on uncooperative controlled nodes with least complexity, better accuracy and efficiency. Furthermore, DCP mechanism can support one-to-all command publishing at the same time. As an example of future C&C model, studying on one-to-any C&C model may help to promote the development of more efficient countermeasures. 展开更多
关键词 one-to-any command and control(C&C) model directional command publishing(DCP) mechanism precisely cooperative attack uncooperative controlled node
原文传递
Shift control method for the local time at descendi ngnode based on sun-synchronous orbit satellite 被引量:5
3
作者 Yang Yong'an Feng Zuren +1 位作者 Sun Linyan Tan Wei 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2009年第1期141-145,共5页
This article analyzes the shift factors of the descending node local time for sun-synchronous satellites and proposes a shift control method to keep the local time shift within an allowance range. It is found that the... This article analyzes the shift factors of the descending node local time for sun-synchronous satellites and proposes a shift control method to keep the local time shift within an allowance range. It is found that the satellite orbit design and the orbit injection deviation are the causes for the initial shift velocity, whereas the atmospheric drag and the sun gravitational perturbation produce the shift acceleration. To deal with these shift factors, a shift control method is put forward, through such methods as orbit variation design, orbit altitude, and inclination keeping control. The simulation experiment and practical application have proved the effectiveness of this control method. 展开更多
关键词 space engineering sun-synchronous orbit satellite local time of descending node drift control method.
在线阅读 下载PDF
Receiver-Controlled Multi-Node Cooperation
4
作者 Liang Ye Yue Li +1 位作者 Xue-Jun Sha Esko Alasaarela 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2014年第2期6-12,共7页
Since wireless links in Ad hoc networks are more fragile than those in traditional wireless networks due to route flapping,multi-node cooperation plays an important role in ensuring the quality of service( QoS). Based... Since wireless links in Ad hoc networks are more fragile than those in traditional wireless networks due to route flapping,multi-node cooperation plays an important role in ensuring the quality of service( QoS). Based on the authors' previous work,this paper proposes a receiver-controlled multi-node cooperation routing protocol,known as AODV-RCC. In this protocol,nodes form a cooperation group based on signal power. In a cooperation group,signal power between a partner and a transmitter,as well as signal power between the partner and the receiver,must be larger than the signal power between the transmitter and the receiver. Otherwise,the transmission will not benefit from cooperation. To avoid collision or congestion,each cooperation group only contains one partner. This partner offers both data and ACK cooperative retransmission. Its retransmission time should be shorter than the internal retry time of the transmitter's MAC layer,because it is better for the partner to retransmit firstly,as it offers a more reliable cooperative link. In AODV-RCC,it is the receiver that chooses the partner,because the link between the partner and the receiver is the most important. According to our simulation results,AODV-RCC shortens the end-to-end delay and increases the packet delivery ratio. 展开更多
关键词 multi-node cooperation receiver-controlled routing protocol Ad hoc network
在线阅读 下载PDF
基于局部拓扑信息的车联网驱动节点辨识
5
作者 孔芝 杨超 王立夫 《控制工程》 北大核心 2026年第1期92-101,共10页
车联网是实现智慧交通、确保道路交通安全运行的重要手段。对关键车辆加以控制,可以实现整个车联网的完全可控。为了实现车联网的完全可控,首先建立车联网模型,将车辆抽象为节点,根据两车辆之间的距离与通信半径的关系建立可以传递信息... 车联网是实现智慧交通、确保道路交通安全运行的重要手段。对关键车辆加以控制,可以实现整个车联网的完全可控。为了实现车联网的完全可控,首先建立车联网模型,将车辆抽象为节点,根据两车辆之间的距离与通信半径的关系建立可以传递信息的边,并运用复杂网络的可控性理论分析车联网的可控性;然后,提出局部博弈匹配算法,基于局部拓扑信息辨识车联网的驱动节点;最后,以鄂尔多斯市的鄂托克西街的某一路段为例,对所提方法进行实验验证。实验结果表明,局部博弈匹配算法在不同情况下均能有效辨识驱动节点,并在运行时间和存储空间方面优于最大匹配算法。 展开更多
关键词 复杂网络 车联网 可控性 驱动节点 局部博弈匹配算法
原文传递
装配式建筑外墙渗漏防治与连接节点加固技术集成应用研究
6
作者 张强 《价值工程》 2026年第8期49-52,共4页
随着装配式建筑的快速发展,预制外墙的渗漏问题成为制约其推广与应用的关键痛点。本文以ALC(蒸压轻质混凝土)外墙板、摩卡墙(模卡砌块墙体)及钢筋混凝土PC(预制混凝土)外墙板为研究对象,系统对比了三者在自重、保温、防渗、施工效率等... 随着装配式建筑的快速发展,预制外墙的渗漏问题成为制约其推广与应用的关键痛点。本文以ALC(蒸压轻质混凝土)外墙板、摩卡墙(模卡砌块墙体)及钢筋混凝土PC(预制混凝土)外墙板为研究对象,系统对比了三者在自重、保温、防渗、施工效率等方面的性能差异。针对ALC外墙板渗漏严重的普遍认知,论文重点研究了其渗漏机理,提出了针对性、系统性的技术措施,使得ALC外墙板能够充分发挥其轻质、高强、保温隔热、绿色环保的固有优势,实现外墙性能与可靠性的显著提升,为装配式建筑外墙的优化选型与工程实践提供理论依据和技术参考。 展开更多
关键词 装配式建筑 预制外墙 ALC板 PC外墙 摩卡墙 渗漏防治 节点加固 集成应用
在线阅读 下载PDF
IEEE 802.11e Medium Access Control层QoS机制的改进研究
7
作者 周立衡 邱恭安 章国安 《南通大学学报(自然科学版)》 CAS 2009年第3期6-9,共4页
针对IEEE802.11e Medium Access Control层的QoS机制高负载时存在远端节点冲突和低优先级业务资源被耗尽的问题,提出在牺牲较小带宽的基础上增加一条忙音信道,取代CTS帧在数据信道上的广播,减少远端节点的冲突.仿真结果表明,该方案具有... 针对IEEE802.11e Medium Access Control层的QoS机制高负载时存在远端节点冲突和低优先级业务资源被耗尽的问题,提出在牺牲较小带宽的基础上增加一条忙音信道,取代CTS帧在数据信道上的广播,减少远端节点的冲突.仿真结果表明,该方案具有较小的冲突概率,有效地减少了远端节点冲突.同时提出一个解决公平性问题的新思路:在避退时间发送忙音抢占信道,以期提高低优先级业务的接入概率. 展开更多
关键词 IEEE 802.11e MEDIUM ACCESS control QOS机制 远端节点冲突 改进方案
在线阅读 下载PDF
钢结构桥梁施工组织与质量控制分析
8
作者 赵丹丹 《中国厨卫》 2026年第2期172-174,共3页
乐清市游龙桥、惊鸿桥工程作为城市公园与文化空间融合的关键纽带,其钢结构桥梁施工在技术组织与质量控制方面具有较强的系统性和复杂性。该项目贯穿软基处理、水中桩基、钢结构吊装、桥面铺装与智能亮化等多个工序环节,涵盖基础结构、... 乐清市游龙桥、惊鸿桥工程作为城市公园与文化空间融合的关键纽带,其钢结构桥梁施工在技术组织与质量控制方面具有较强的系统性和复杂性。该项目贯穿软基处理、水中桩基、钢结构吊装、桥面铺装与智能亮化等多个工序环节,涵盖基础结构、上部结构与附属构造全过程。在施工过程中,面对资金迟滞、地质突变、高压管线干扰、跨交通干道作业等多重难点,项目管理团队通过专项方案编制、专家论证机制、关键节点计划控制与资源统筹协调,保障了工程质量与安全。文章从设计解读、施工难点识别、关键节点组织、管理策略实施等方面系统梳理了该项目的施工过程,力求为同类城市景观钢结构桥梁提供可借鉴的工程实践思路。 展开更多
关键词 钢结构桥梁 全过程管理 质量控制 关键节点 施工组织
在线阅读 下载PDF
装配式住宅施工连接节点质量控制技术分析
9
作者 侯进君 《中国厨卫》 2026年第1期143-145,共3页
为解决装配式住宅连接节点施工困难与质量不稳定问题,文章以某装配式混凝土结构住宅项目为例,采用套筒灌浆连接、螺栓连接与钢丝绳套连接技术,构建以连接强度达标率不小于95%和灌浆密实度不小于95%为核心指标的质量控制体系,通过对比分... 为解决装配式住宅连接节点施工困难与质量不稳定问题,文章以某装配式混凝土结构住宅项目为例,采用套筒灌浆连接、螺栓连接与钢丝绳套连接技术,构建以连接强度达标率不小于95%和灌浆密实度不小于95%为核心指标的质量控制体系,通过对比分析验证技术改进效果。研究表明,优化后的连接强度达标率提升至96.8%,工期缩短至4天/层,综合成本降低22.8%,有效提升了结构安全性与施工效率。 展开更多
关键词 装配式住宅 连接节点 套筒灌浆 质量控制
在线阅读 下载PDF
基于凝聚型层次聚类的新能源接入配电网控制方法
10
作者 王有军 《自动化技术与应用》 2026年第2期45-49,共5页
新能源设备大量接入配电网导致其运行存在波动,为此,提出一种基于凝聚型层次聚类的控制方法。凝聚型层次聚类算法将配电网各个节点作为簇,通过不断合并最相似的簇来形成层次化的聚类结构,由此将配电网中的节点划分为具有不同特性的集群... 新能源设备大量接入配电网导致其运行存在波动,为此,提出一种基于凝聚型层次聚类的控制方法。凝聚型层次聚类算法将配电网各个节点作为簇,通过不断合并最相似的簇来形成层次化的聚类结构,由此将配电网中的节点划分为具有不同特性的集群。计算新能源接入量与配电网消纳能力之间的误差,基于误差最小原则,将新能源分配给配电网节点集群。利用萤火虫算法在各个配电网节点集群中寻找满足网损和电压偏差最小化的最优解,得出控制方案。研究结果表明,在两种工况下,所研究方法的网损和电压偏差均达到最低,控制效果更好。 展开更多
关键词 凝聚型层次聚类 新能源接入配电网 节点划分 控制目标 控制方案
在线阅读 下载PDF
Input Structure Design for Structural Controllability of Complex Networks 被引量:2
11
作者 Lifu Wang Zhaofei Li +2 位作者 Guotao Zhao Ge Guo Zhi Kong 《IEEE/CAA Journal of Automatica Sinica》 SCIE EI CSCD 2023年第7期1571-1581,共11页
This paper addresses the problem of the input design of large-scale complex networks.Two types of network components,redundant inaccessible strongly connected component(RISCC)and intermittent inaccessible strongly con... This paper addresses the problem of the input design of large-scale complex networks.Two types of network components,redundant inaccessible strongly connected component(RISCC)and intermittent inaccessible strongly connected component(IISCC)are defined,and a subnetwork called a driver network is developed.Based on these,an efficient method is proposed to find the minimum number of controlled nodes to achieve structural complete controllability of a network,in the case that each input can act on multiple state nodes.The range of the number of input nodes to achieve minimal control,and the configuration method(the connection between the input nodes and the controlled nodes)are presented.All possible input solutions can be obtained by this method.Moreover,we give an example and some experiments on real-world networks to illustrate the effectiveness of the method. 展开更多
关键词 Complex network input configuration minimum controlled node set structural controllability
在线阅读 下载PDF
新能源电力平台能量节点频率响应控制研究
12
作者 朱利民 章亮 +2 位作者 李明 费勤海 纪辉 《电子设计工程》 2026年第2期140-144,共5页
新能源的引入改变了传统电力系统的动态特性,如风能和太阳能的输出具有高度不确定性,导致能量节点频率响应特性呈现较强的随机波动性,电力平台难以对负荷变化作出快速响应。为此,应用协同控制策略设计新能源电力平台能量节点频率响应控... 新能源的引入改变了传统电力系统的动态特性,如风能和太阳能的输出具有高度不确定性,导致能量节点频率响应特性呈现较强的随机波动性,电力平台难以对负荷变化作出快速响应。为此,应用协同控制策略设计新能源电力平台能量节点频率响应控制方法。分析新能源电力平台能量节点频率响应动态过程,获取能量节点频率响应特性。根据该特性设计频率响应协同控制器,在控制器中加入频率响应协同控制单元以避免能量释放过度问题。将附加功率值作为能量节点频率响应控制参量,构建控制模型以实现节点频率响应精准控制。由实验结果可知,该方法控制的水电、火电、燃气、储能、风电能量节点对应的频率跌落程度最大值分别为0.44、0.38、0.34、0.23、0.18 Hz,均在理想控制范围内,且控制响应耗时较短,证明所研究方法具有高效、可靠的控制效果。 展开更多
关键词 新能源电力平台 能量节点 频率响应 协同控制 附加功率值
在线阅读 下载PDF
装配式建筑连接节点施工工艺优化策略分析
13
作者 杨栋栋 《中国厨卫》 2026年第1期34-36,共3页
装配式混凝土建筑连接节点的施工工艺直接影响结构的整体性能与安全性。文章通过系统分析套筒灌浆、现浇节点区施工、预埋件锚固及板缝灌浆等关键工艺技术,构建了完整的连接节点施工工艺体系,并以某高层住宅项目为例,表明工艺优化后灌... 装配式混凝土建筑连接节点的施工工艺直接影响结构的整体性能与安全性。文章通过系统分析套筒灌浆、现浇节点区施工、预埋件锚固及板缝灌浆等关键工艺技术,构建了完整的连接节点施工工艺体系,并以某高层住宅项目为例,表明工艺优化后灌浆料水料比控制在0.26~0.28、流动度初始值不小于300 mm、关键节点密封性合格率达99.4%;预制构件结合面粗糙面面积不小于80%、预制板凹凸深度不小于4 mm、预制梁柱端凹凸深度不小于6 mm;螺栓紧固力矩值超出设计标准的95%、镀锌层厚度达到67μm,结构预期寿命超过25年。 展开更多
关键词 装配式建筑 混凝土连接节点 套筒灌浆 施工工艺 质量控制
在线阅读 下载PDF
基于NodeMCU的智能浇灌系统设计 被引量:1
14
作者 刘睿 张秀再 许芝也 《信息技术》 2024年第6期29-35,共7页
当前,智能化技术不断发展,为了提升现代农田的智能化管理水平,设计以NodeMCU(节点微控制单元)作为中央控制器的智能浇灌系统,实现农田灌溉智能化。YL-69土壤湿度传感器用于检测土壤含水量,DHT11温湿度传感器用于检测环境温度和湿度,中... 当前,智能化技术不断发展,为了提升现代农田的智能化管理水平,设计以NodeMCU(节点微控制单元)作为中央控制器的智能浇灌系统,实现农田灌溉智能化。YL-69土壤湿度传感器用于检测土壤含水量,DHT11温湿度传感器用于检测环境温度和湿度,中央控制器负责数据的采集与处理,通过内置的ESP8266芯片连接Wi-Fi将数据无线传输至网页端进行实时监测与控制,并对比系统设置的阈值指标,反馈至微控制器,微控制器通过控制继电器打开水泵对土地浇灌,并且搭建数据库进行数据记录与分析。该系统结构简单,可靠性较高,可实现浇灌的无人化管理,具有重要的现实意义。 展开更多
关键词 节点微控制单元 智能浇灌 YL-69土壤湿度传感器 DHT11温湿度传感器 无线传输
在线阅读 下载PDF
基于NodeMCU的智能玻璃百叶窗控制系统的设计 被引量:1
15
作者 林朋右 王佳豪 蔡益富 《黑龙江科学》 2023年第16期130-133,共4页
基于Node MCU设计了智能玻璃百叶窗控制系统,使用PWM控制信号控制数字舵机的旋转角度,根据传感器反馈信号自动对百叶窗进行开合调整,使用PID控制算法提高了控制精度及稳定性。通过传感器实时监测室内外光线及温度等环境参数,以优化室内... 基于Node MCU设计了智能玻璃百叶窗控制系统,使用PWM控制信号控制数字舵机的旋转角度,根据传感器反馈信号自动对百叶窗进行开合调整,使用PID控制算法提高了控制精度及稳定性。通过传感器实时监测室内外光线及温度等环境参数,以优化室内光线及温度,提高舒适度与能源利用率。该系统通过WiFi连接实现与手机端的通信,支持手动控制与远程控制,便于用户随时随地对百叶窗进行调节,可广泛应用于住宅、办公室、商业建筑等场所,具有较高的实用价值及市场潜力,为智能家居的发展提供了新思路。 展开更多
关键词 自动调节 百叶窗 node MCU 智能控制
在线阅读 下载PDF
A New Storage Strategy for Hypertext Based Version Control
16
作者 王岩 郭福顺 +1 位作者 李莲治 魏玲 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 1996年第3期14-19,共6页
Version control is an urgent problem to be solved at present for data management. Based on the authors' hypertext data model with version control,some details about the storage strategy are discussed. A new strate... Version control is an urgent problem to be solved at present for data management. Based on the authors' hypertext data model with version control,some details about the storage strategy are discussed. A new strategy to define some key nodes within the version derivation graph is presented and some implementation details are described. At last, the performance of different strategies are compared with each other. 展开更多
关键词 ss: HYPERTEXT VERSION control VERSION node key node VERSION DERIVATION GRAPH
在线阅读 下载PDF
基于受扰后平衡点延拓的在线暂态稳定控制策略——稳控措施求解 被引量:1
17
作者 李崇涛 张建新 +4 位作者 何劲捷 刘宇明 李诗旸 高琴 段超 《西安交通大学学报》 北大核心 2025年第9期22-32,共11页
针对电力系统受扰后暂态失稳问题,提出了一种基于受扰后平衡点构造及延拓的控制策略。首先,基于所提平衡点求解数学模型,沿扰动方向构造并延拓该平衡点;然后,提出了鞍结分岔点求解—平衡点延拓—控制策略校验的三阶段控制策略求解流程,... 针对电力系统受扰后暂态失稳问题,提出了一种基于受扰后平衡点构造及延拓的控制策略。首先,基于所提平衡点求解数学模型,沿扰动方向构造并延拓该平衡点;然后,提出了鞍结分岔点求解—平衡点延拓—控制策略校验的三阶段控制策略求解流程,并基于灵敏度分析建立平衡点延拓与控制参数之间的解析关系,优化控制策略的求解;最后,基于IEEE 39节点标准算例和省级实际电网算例进行了仿真验证。结果表明:所提控制策略能够有效提升受扰后系统的稳定裕度,相比于传统的控制策略,所提策略给出了解析的控制依据,能够快速精准地确定控制参数的调整方向和幅度,具有更高的计算效率和准确性。该研究可为在线紧急控制提供兼具解析性与可靠性的解决方案。 展开更多
关键词 暂态稳定控制 鞍结分岔点 灵敏度分析 在线稳定控制
在线阅读 下载PDF
基于物联网与PLC的立体车库控制系统设计与实现
18
作者 王晓瑜 阎宇威 《自动化技术与应用》 2026年第2期30-33,108,共5页
选用西门子S7-1200 PLC为控制器,通过在手机终端上的腾讯云远程监控界面发布操作命令,由IOT2050智能网关和物联网平台Node-RED接收指令并下发至PLC,控制移车传动机构完成指定车位存车和取车等操作。实验结果表明,基于物联网与S7-1200 PL... 选用西门子S7-1200 PLC为控制器,通过在手机终端上的腾讯云远程监控界面发布操作命令,由IOT2050智能网关和物联网平台Node-RED接收指令并下发至PLC,控制移车传动机构完成指定车位存车和取车等操作。实验结果表明,基于物联网与S7-1200 PLC的巷道堆垛立体车库系统,以手机端作为操作面板,可在线实时完成系统各项功能,且运行可靠,稳定性好,控制精度高。 展开更多
关键词 巷道堆垛式立体车库 PLC 物联网平台node-RED 步进电机及驱动器 远程控制
在线阅读 下载PDF
Do you want to participate in a clinical study as a healthy control?-Risk or benefit? 被引量:2
19
作者 Hanna Giessen Christian A Nebiker +3 位作者 Matthias Bruehlmeier Stefan Spreitzer Beat Mueller Philipp Schuetz 《World Journal of Clinical Cases》 SCIE 2017年第12期437-439,共3页
A healthy woman volunteered to participate as "healthy control" in a study.An increased level of procalcitonin(PCT) was detected and remained elevated on follow-up measurements.As calcitonin levels were elev... A healthy woman volunteered to participate as "healthy control" in a study.An increased level of procalcitonin(PCT) was detected and remained elevated on follow-up measurements.As calcitonin levels were elevated as well,thyroid ultrasound was performed which revealed nodes in both thyroid lobes,one of them showing metabolic activity in positron emission tomography-computed tomography scan.To exclude a malignant thyroid cancer despite the negative findings in a fine needle aspiration the patient underwent thyroidectomy and a medullary thyroid carcinoma(MTC) was detected in the right lobe.MTC is a rare endocrine tumor with a poor prognosis once having spread,therefore early detection remains a priority for the outcome.Screening parameter is serum calcitonin,in absence of infection the pro-hormone PCT can be used as a screening parameter as well with high sensitivity. 展开更多
关键词 MEDULLARY THYROID cancer PROCALCITONIN THYROID nodes ENDOCRINOLOGY Public health HEALTHY control
暂未订购
基于Node-red的云端智能生产线控制系统设计与实现 被引量:5
20
作者 陈玄烨 张鑫 +2 位作者 张景翔 文世华 李红利 《山东工业技术》 2024年第3期58-62,共5页
针对传统生产线在刚性生产过程中面临的成本过高、远程实施难、兼容性低等关键问题,基于目前中小企业的技术基础相对薄弱,无法将云计算平台、数据存储和处理等设备及技术运用到实际生产中的现状,本文利用西门子S7-1200 PLC作为核心控制... 针对传统生产线在刚性生产过程中面临的成本过高、远程实施难、兼容性低等关键问题,基于目前中小企业的技术基础相对薄弱,无法将云计算平台、数据存储和处理等设备及技术运用到实际生产中的现状,本文利用西门子S7-1200 PLC作为核心控制器,基于Node-red平台设计了成本低、兼容性高的云端智能生产线监控系统,便于实现对于生产线的监视和控制,提高生产效率与产品质量。现场运行表明,该系统运行稳定,满足智能生产线的设计要求,同时具备部署成本低、兼容性高的突出优势。 展开更多
关键词 工业物联网 node-red 智能生产线 云端控制系统
在线阅读 下载PDF
上一页 1 2 64 下一页 到第
使用帮助 返回顶部