期刊文献+
共找到2,733篇文章
< 1 2 137 >
每页显示 20 50 100
Experimental study of the movement of control fluid in compound perforation
1
作者 Zhao Xu Liu Gonghui +1 位作者 Li Jun Ding Qingxin 《Petroleum Science》 SCIE CAS CSCD 2009年第4期389-394,共6页
The interaction between the high pressure gas and the control fluid and the movement mechanism of the control fluid in compound perforation were studied by a series of large-scale experiments, where the movement behav... The interaction between the high pressure gas and the control fluid and the movement mechanism of the control fluid in compound perforation were studied by a series of large-scale experiments, where the movement behavior of the control fluid was observed. The curves of measured pressure were analyzed, a mathematical model for the rigid movement of the control fluid was established, and the movement velocity of control fluid was analyzed. Moreover, the velocity from experimental results and velocity from an analytical solution were contrasted. The movement of the control fluid in the initial stage was similar to the rigid movement; however, the propagation of the pressure wave in the control fluid should be taken into account. Experimental results are significant for research on the movement mechanism of control fluid in compound perforation. 展开更多
关键词 Compound perforation experimental study control fluid gas and liquid interaction mathematical model
原文传递
Laboratory investigation of high-temperature preformed particle gels for fluid control in granite cores for geothermal applications
2
作者 DARKO K Caleb LIU Yanbo +2 位作者 SCHUMAN Thomas WEI Mingzhen BAI Baojun 《Petroleum Exploration and Development》 2025年第5期1378-1388,共11页
To understand the applicability of high-temperature preformed particle gel(HT-PPG)for control of short-circuiting in enhanced geothermal systems(EGSs),core flooding experiments were conducted on fractured granite core... To understand the applicability of high-temperature preformed particle gel(HT-PPG)for control of short-circuiting in enhanced geothermal systems(EGSs),core flooding experiments were conducted on fractured granite cores under varying fracture widths,gel particle sizes and swelling ratios.Key parameters such as injection pressure,water breakthrough pressure,and residual resistance factor were measured to evaluate HT-PPG performance.The gel exhibited strong injectability,entering granite fractures at pressure gradients as low as 0.656 MPa/m;HT-PPG yields a superior sealing performance by significantly reducing the permeability;and dehydration occurs during HT-PPG propagation,with a dehydration ratio ranging from 4.71%to 11.36%.This study reveals that HT-PPG can be injected into geothermal formations with minimal pressure yet provides strong resistance to breakthrough once in place.This balance of injectability and sealing strength makes HT-PPG effective for addressing thermal short-circuiting in EGS reservoirs. 展开更多
关键词 geothermal reservoir granite reservoir enhanced geothermal systems high-temperature preformed particle gel fluid control sealing performance
在线阅读 下载PDF
Numerical modelling of structural controls on fluid flow and mineralization 被引量:14
3
作者 J.Robinson P.M.Schaubs 《Geoscience Frontiers》 SCIE CAS 2011年第3期449-461,共13页
This paper presents the results of a set of numerical models focussing on structural controls on hydrothermal mineralization. We first give an overview of natural phenomena of structurally-controlled ore formation and... This paper presents the results of a set of numerical models focussing on structural controls on hydrothermal mineralization. We first give an overview of natural phenomena of structurally-controlled ore formation and the background theory and mechanisms for such controls. We then provide the results of a group of simple 2D numerical models validated through comparison with Cu-vein structure observed near the Shilu Copper deposit (Yangchun, Guangdong Province, China) and finally a case study of 3D numerical modelling applied to the Hodgkinson Province in North Queensland (Australia). Two modelling approaches, discrete deformation modelling and continuum coupled deformation and fluid flow modelling, are involved. The 2D model-derived patterns are remarkably consistent with the Cu-vein structure from the Shilu Copper deposit, and show that both modelling approaches can realistically simulate the mechanical behaviours of shear and dilatant fractures. The continuum coupled deformation and fluid flow model indicates that pattern of the Cu- veins near the Shilu deposit is the result of shear strain localization, development of dilation and fluid focussing into the dilatant fracture segments. The 3D case-study models (with deformation and fluid flow coupling) on the Hodgkinson Province generated a number of potential gold mineralization 展开更多
关键词 Structural control DILATION fluid flow MINERALIZATION Numerical modelling Shilu Cu-deposit Hodgkinson Province
在线阅读 下载PDF
Decoupling Control of Fluid Catalytic Cracking Unit 被引量:1
4
作者 Duraid Fadhil Ahmed 《Journal of Chemistry and Chemical Engineering》 2011年第1期12-19,共8页
This study presents a decoupling control scheme of fluid catalytic cracking unit to account for the high interaction between two temperature control loops. The feed flow rate load disturbance is introduced to test the... This study presents a decoupling control scheme of fluid catalytic cracking unit to account for the high interaction between two temperature control loops. The feed flow rate load disturbance is introduced to test the proposed decoupling control scheme. Through simulation study shown that the decoupling is effective, stable and it presents advantage over controller without decoupler. Also, this scheme is able to offer good dynamic performance for most disturbances. 展开更多
关键词 control of fluid catalytic cracking unit multivariable control decoupling control.
在线阅读 下载PDF
Control of facies and fluid potential on hydrocarbon accumulation and prediction of favorable Silurian targets in the Tazhong Uplift,Tarim Basin,China 被引量:3
5
作者 Yu Yixing Chen Dongxia Pang Hong Shi Xiuping Pang Xiongqi 《Petroleum Science》 SCIE CAS CSCD 2011年第1期24-33,共10页
Exploration practices show that the Silurian hydrocarbon accumulation in the Tazhong Uplift is extremely complicated.Our research indicates that the oil and gas accumulation is controlled by favorable facies and low f... Exploration practices show that the Silurian hydrocarbon accumulation in the Tazhong Uplift is extremely complicated.Our research indicates that the oil and gas accumulation is controlled by favorable facies and low fluid potential.At the macro level,hydrocarbon distribution in this uplift is controlled by structural zones and sedimentary systems.At the micro level,oil occurrences are dominated by lithofacies and petrophysical facies.The control of facies is embodied in high porosity and permeability controlling hydrocarbon accumulation.Besides,the macro oil and gas distribution in the uplift is also influenced by the relatively low fluid potential at local highs,where most successful wells are located.These wells are also closely related to the adjacent fractures.Therefore,the Silurian hydrocarbon accumulation mechanism in the Tazhong Uplift can be described as follows.Induced by structures,the deep and overpressured fluids migrated through faults into the sand bodies with relatively low potential and high porosity and permeability.The released overpressure expelled the oil and gas into the normal-pressured zones,and the hydrocarbon was preserved by the overlying caprock of poorly compacted Carboniferous and Permian mudstones.Such a mechanism reflects favorable facies and low potential controlling hydrocarbon accumulation.Based on the statistical analysis of the reservoirs and commercial wells in the uplift,a relationship between oil-bearing property in traps and the facies-potential index was established,and a prediction of two favorable targets was made. 展开更多
关键词 Tazhong Uplift SILURIAN control of facies fluid potential oil and gas prediction
原文传递
Cerebrospinal fluid and neural stem cell niche control 被引量:2
6
作者 MaIsabel Alonso Angel Gato 《Neural Regeneration Research》 SCIE CAS CSCD 2018年第9期1546-1547,共2页
Neurogenesis from inner brain neural stem cells (NSCs) is a process which takes place continuously in mammals through- out their life. However, the main ontogenic difference is the intensity of neurogenesis, which c... Neurogenesis from inner brain neural stem cells (NSCs) is a process which takes place continuously in mammals through- out their life. However, the main ontogenic difference is the intensity of neurogenesis, which commences as a very intensive and global activity in the early embryonic brain (neural tube), persists in fetal and newborn stages, and declines significantly in adulthood, becoming restricted to specific places with low neurogenic activity such as the subventricular zone (SVZ) and the subgranular zone (SGZ) in the dentate gyrus (DG) of the hippocampus. 展开更多
关键词 SGZ CSF Cerebrospinal fluid and neural stem cell niche control SVZ
暂未订购
Offshore Structural Control Considering Fluid Structure Interaction
7
作者 Ju Myung KIM Dong Hyawn KIM Gyu Won LEE 《China Ocean Engineering》 SCIE EI 2006年第2期259-268,共10页
Tuned Mass Damper (TMD) was applied to an offshore structure to control ocean wave-induced vibration, In the analysis of the dynamic response of the offshore structure, fluid-structure interaction is considered and ... Tuned Mass Damper (TMD) was applied to an offshore structure to control ocean wave-induced vibration, In the analysis of the dynamic response of the offshore structure, fluid-structure interaction is considered and the errors, which occur in the linearization of the interaction, are investigated. For the investigation of the performance of TMD in controlling the vibration, both regular waves with different periods and irregular waves with different significant wave heights are used. Based on the numerical analysis it is concluded that the fluid-structure interaction should be considered in the evaluation of the capability of TMD in vibration control of offshore structures. 展开更多
关键词 offshore structure tuned mass damper vibration control fluid-structure interaction NONLINEAR Morison equation
在线阅读 下载PDF
Optimizing Control for Rotor Vibration with Magnetorheological Fluid Damper 被引量:3
8
作者 邢健 何立东 王锎 《Transactions of Nanjing University of Aeronautics and Astronautics》 EI 2014年第5期538-545,共8页
The aim of this work is to analyze and design a control system for vibration reduction in a rotor system using a shear mode magnetorheological fluid(MRF)damper.A dynamic model of the MRF damper-rotor system was built ... The aim of this work is to analyze and design a control system for vibration reduction in a rotor system using a shear mode magnetorheological fluid(MRF)damper.A dynamic model of the MRF damper-rotor system was built and simulated in Matlab/Simulink to analyze the rotor vibration characteristics and the vibration reduction effect of the MRF damper.Based on the numerical simulation analysis,an optimizing control strategy using pattern search method was proposed and designed.The control system was constructed on a test rotor bench and experiment validations on the effectiveness of the proposed control strategy were conducted.Experimental results show that rotor vibration caused by unbalance can be well controlled whether in resonance region(70%)or in non-resonance region(30%).An irregular vibration amplitude jump can be suppressed with the optimization strategy.Furthermore,it is found that the rapidity of transient response and efficiency of optimizing technique depend on the pattern search step.The presented strategies and control system can be extended to multi-span(more than two or three spans)rotor system.It provides a powerful technical support for the extension and application in target and control for shafting vibration. 展开更多
关键词 magnetorheological fluid damper optimizing control pattern search method vibration reduction
在线阅读 下载PDF
Bifurcation and stability of an improved time-delayed fluid flow model in internet congestion control 被引量:4
9
作者 刘玉良 朱杰 罗晓曙 《Chinese Physics B》 SCIE EI CAS CSCD 2009年第9期3772-3776,共5页
Based on the fluid flow time-delayed model proposed by Misra et al in internet congestion control, one modified time-delayed model is presented, where the influence of the communication delay on the router queue lengt... Based on the fluid flow time-delayed model proposed by Misra et al in internet congestion control, one modified time-delayed model is presented, where the influence of the communication delay on the router queue length is investigated in detail. The main advantage of the new model is that its stability domain is larger even without an extra controller. By linear stability analysis and numerical simulation, tbe effectiveness and feasibility of the novel model in internet congestion control are verified. 展开更多
关键词 fluid flow model congestion control time delay Hopf bifurcation
原文传递
The Sixth International Conference on Fluid Power Transmission and Control(ICFP'2005)
10
《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2004年第1期160-160,共1页
Date: April 12-15, 2005 Venue: Zhejiang University, Hangzhou, P. R. China Organized by Institute of Mechatronic Control Engineering, Zhejiang University
关键词 ICFP’2005 The Sixth International Conference on fluid Power Transmission and control
在线阅读 下载PDF
Clinical Observation on Pressing Beans at Auricular Points Combined with Controlled Fluid Replacement for Prevention of Uroschesis after Hemorrhoidectomy
11
作者 CHEN Gang HUA Xiaodong +1 位作者 ZHOU Bin ZHANG Yujie 《外文科技期刊数据库(文摘版)医药卫生》 2021年第7期364-366,共5页
Objective: to analyze the clinical effect of auricular point pressing beans combined with controlled fluid infusion in preventing urinary retention after mixed hemorrhoid operation. Methods: the data of 80 patients wi... Objective: to analyze the clinical effect of auricular point pressing beans combined with controlled fluid infusion in preventing urinary retention after mixed hemorrhoid operation. Methods: the data of 80 patients with mixed hemorrhoids collected from May 2019 to March 2021 in Suzhou Xiangcheng District Hospital of Traditional Chinese Medicine were collected and sorted out. The patients who had incomplete data, were participating in other researchers and did not meet the standard were divided into two groups according to the order of admission (control group and observation group, 40 patients in each group). The control group used fluid replacement control methods, including control of fluid replacement volume (intravenous fluid infusion volume and oral intake) and adjustment of infusion speed 2 h after operation. The observation group used the method of auricular point pressing beans and fluid infusion control, and compared the urination of the two groups after operation. Results: in the observation group, the scores of voiding smoothness (1.90±0.32, 1.40±0.29) at 4 h and 5-6 h after operation were lower than those of the control group (2.45±0.41, 1.88±0.31), the time of first urination (2.02±0.98) h was shorter than that of the control group (3.04±1.11) h, the volume of voiding (480.00±20.56)mL was higher than that of the control group (400.00±33.00)mL at 2 h after operation, and the incidence rate of urinary retention (2.5%) was lower than that of the control group (20.0%) Conclusion: auricular acupressure combined with controlled fluid infusion has significant effect in preventing urinary retention after mixed hemorrhoid operation. 展开更多
关键词 TCM treatment CATHETERIZATION fluid replacement control mixed hemorrhoids auricular point
暂未订购
Automotive Ride Comfort Control Using MR Fluid Damper
12
作者 Mahmoud El-Kafafy Samir M. El-Demerdash Al-Adl Mohamed Rabeih 《Engineering(科研)》 2012年第4期179-187,共9页
In this paper, the performance of automotive ride comfort using Bouc-Wen type magneto-rheological (MR) fluid damper is studied using a two degree of freedom quarter car model. The sliding mode control is used to force... In this paper, the performance of automotive ride comfort using Bouc-Wen type magneto-rheological (MR) fluid damper is studied using a two degree of freedom quarter car model. The sliding mode control is used to force the MR damper to follow the dynamics of ideal sky-hock model. The model is tested on two excitations, the first is a road hump with severe peak amplitude and the second is a statistical random road. The results are generated and presented in time and frequency domains using Matlab/Simulink software. Comparison with the fully active, ideal semi-active and conventional passive suspension systems are given as a root mean square values. Simulation results, for the designed controller, show that with the controllable MR damper has a significant improvement for the vehicle road holding then its lateral stability as well as road damage in comparison with passive, fully active and ideal semi-active suspension systems. 展开更多
关键词 RIDE COMFORT RHEOLOGICAL fluid DAMPER Vibration control
暂未订购
Vibration and Control of Pipes Conveying Fluid
13
作者 王世忠 沈毅 +1 位作者 葛升民 赵长江 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 1996年第3期85-91,共7页
The vibration and control of pipes conveying fluid is studied. The solid-liquid coupling vibration equations of the pipe conveying fluid are deduced by Hamilton principle.The direct velocity feedback is used to contro... The vibration and control of pipes conveying fluid is studied. The solid-liquid coupling vibration equations of the pipe conveying fluid are deduced by Hamilton principle.The direct velocity feedback is used to control the pipe vibration. The whip response and control are discussed. 展开更多
关键词 ss: PIPE solid-fluid coupling VIBRATION and control WHIP direct VELOCITY FEEDBACK
在线阅读 下载PDF
Controllability Approach for a Fluid Structure Interaction Problem
14
作者 Ibrahima Mbaye 《Applied Mathematics》 2012年第3期213-216,共4页
The present paper presents a new method to solve fluid structure interaction problem. Our computational method is based on controllability approach. Given a target structural displacement we will find a control steeri... The present paper presents a new method to solve fluid structure interaction problem. Our computational method is based on controllability approach. Given a target structural displacement we will find a control steering the displacement of the structure u to . We need to define a payoff functional (J): where u solves the structure equation for the control and is a fixed value. Our aim is to find a control which minimizes the payoff criterion. And therefore we find u the beam displacement, v the velocity of the fluid and p the pressure of the fluid. 展开更多
关键词 fluid Structure Interaction FINITE ELEMENTS METHOD controlLABILITY BFGS METHOD
在线阅读 下载PDF
高温高压调节阀热流固耦合及振动特性分析 被引量:1
15
作者 张伟政 韩光枫 +1 位作者 黄文彬 赵明仁 《液压气动与密封》 2026年第1期68-75,共8页
针对化工管道系统在输运高温水蒸汽时,调节阀阀杆常发生大幅振动与介质外泄等问题,以高温高压调节阀为研究对象,基于计算流体动力学(CFD)和热流固耦合技术,探究了其流场压力脉动特性与结构共振响应,并求解了阀杆共振幅值。研究结果表明... 针对化工管道系统在输运高温水蒸汽时,调节阀阀杆常发生大幅振动与介质外泄等问题,以高温高压调节阀为研究对象,基于计算流体动力学(CFD)和热流固耦合技术,探究了其流场压力脉动特性与结构共振响应,并求解了阀杆共振幅值。研究结果表明:小开度工况时,阀芯与阀笼节流部位存在明显的速度梯度变化,并出现了局部的高速射流;同时,阀芯下方与阀笼流体出口域均出现了涡流回旋,强烈的涡旋不仅会加剧流体动能损耗,同时易激发大幅压力脉动。经热流固耦合模态分析,发现阀门第一阶、第三阶与第四阶固有频率与流体域大幅值压力脉动频率接近,导致阀门与液流系统产生流激共振。经谐响应分析,发现调节阀在10%和30%开度运行时,阀杆在109.6 Hz和154.3 Hz附近产生振幅突变,最大幅值分别为1.9122 mm和1.556 mm。阀杆大的振幅不仅造成填料产生大的变形,引发泄漏问题,同时会对阀盖造成严重磨损。为了避免调节阀发生共振,应尽量减少调节阀在小开度工况下工作。 展开更多
关键词 高温高压调节阀 热流固耦合 流激振动
在线阅读 下载PDF
一种面向深部复杂地层的纳米凝胶增黏堵漏剂性能评价
16
作者 罗平亚 贺佳宁 +7 位作者 段永强 张勇 游子卫 刘平江 陈利 白杨 王韧 白英睿 《新疆石油天然气》 2026年第1期1-8,共8页
针对超深井钻完井过程中钻井液在高温、高盐、高地应力复杂地层环境下普遍存在的流变性失控、滤失量剧增及井壁失稳难题,设计并合成了一种基于丙烯酰胺(AM)与甲基丙烯酰氧乙基三甲基氯化铵(DMC)的阳离子型纳米凝胶增黏堵漏剂P(AM-DMC)... 针对超深井钻完井过程中钻井液在高温、高盐、高地应力复杂地层环境下普遍存在的流变性失控、滤失量剧增及井壁失稳难题,设计并合成了一种基于丙烯酰胺(AM)与甲基丙烯酰氧乙基三甲基氯化铵(DMC)的阳离子型纳米凝胶增黏堵漏剂P(AM-DMC)。该材料采用反相悬浮聚合法制备,兼具了聚合物柔性链的增黏特性与纳米颗粒的高界面活性及尺寸效应。利用扫描电镜(SEM)对其形貌进行表征,结果显示其呈现不规则多面体结构,粒径分布为200~500 nm;系统评价了其在低固相水基钻井液基浆中的流变性能、滤失性能和抗盐性;并结合接触角与Zeta电位测试揭示了其微观界面特性。微观机理分析表明,材料表面接触角为13°,Zeta电位为+59.1 mV,这赋予了其高亲水性和优异的分散稳定性,是实现增黏与堵漏协同作用的基础。P(AM-DMC)纳米凝胶通过阳离子链段与黏土颗粒间的强静电吸附作用,以及自身形成的三维空间网络结构,能显著提升钻井液体系的结构黏度与抗剪切能力。当P(AM-DMC)加量增加时,钻井液的表观黏度和动切力较基浆有显著提升,同时API滤失量与高温高压滤失量显著降低;经170℃高温老化后,体系仍能保持优异的流变稳定性和低滤失量,证明其具备突出的热稳定性。P(AM-DMC)纳米凝胶为深部复杂地层钻井液体系的高性能化提供了一种兼具高效增黏、精细封堵和卓越抗温能力的新思路,对保障超深井安全高效钻探具有重要的工程应用价值。 展开更多
关键词 钻井液 纳米凝胶 增黏堵漏剂 流变性 降滤失性 抗盐性
在线阅读 下载PDF
FluidSIM在液压与气动控制仿真实验中的应用 被引量:10
17
作者 郭联金 潘斌 《实验技术与管理》 CAS 北大核心 2015年第8期121-126,共6页
采用基于FluidSIM软件的系统仿真技术,简化了液压与气动控制系统的设计和分析。介绍了最新版FluidSIM软件的功能特点,并分别通过电液比例控制系统的建模及仿真、气动步进顺控系统的建模及仿真两个实例,说明FluidSIM在现代液压与气动控... 采用基于FluidSIM软件的系统仿真技术,简化了液压与气动控制系统的设计和分析。介绍了最新版FluidSIM软件的功能特点,并分别通过电液比例控制系统的建模及仿真、气动步进顺控系统的建模及仿真两个实例,说明FluidSIM在现代液压与气动控制新技术中的应用方法和实现过程。仿真过程及结果表明,FluidSIM的运用有助于液压与气动控制系统的分析、设计和工程应用研究。 展开更多
关键词 电液比例位置控制 气动控制系统 仿真实验 fluidSIM
在线阅读 下载PDF
高温型水源热泵研究进展和应用现状
18
作者 刘寅 朱明茹 +3 位作者 董岁具 孟照峰 王龙基 魏奔 《中外能源》 2026年第1期33-41,共9页
通过热泵技术可以实现工业余热的提质和资源综合利用。高温型水源热泵可有效回收低品位余热,实现80℃以上高温热能的稳定输出。开发适配高温工况的环保、高效循环工质与关键部件是当前技术突破的重点。自然工质对环境友好,但高温下存在... 通过热泵技术可以实现工业余热的提质和资源综合利用。高温型水源热泵可有效回收低品位余热,实现80℃以上高温热能的稳定输出。开发适配高温工况的环保、高效循环工质与关键部件是当前技术突破的重点。自然工质对环境友好,但高温下存在局限性,现有高温热泵循环工质多为非共沸混合工质,混合工质的研究重点在于配比优化与协同增效。目前尚未找到公认的有效高温工质,还需进行大量的研究工作。高温型水源热泵系统的典型循环结构包括单级压缩式、多级压缩式、复叠压缩式,工质与循环结构的协同配合是系统性能提升的关键。此外,随着系统复杂度的提高,精准控制才能实现系统稳定运行,优化智能控制方法也是热泵机组的发展趋势之一。高温型水源热泵技术已经在污/废水余热回收方面有了实际应用,虽然前期投资相对偏高,但其使用寿命较长且运行成本较低,可长期稳定地为企业提供清洁、高效的热能供应。今后需要围绕提升部件可靠性和降低成本两大方向攻关。 展开更多
关键词 高温型水源热泵 循环工质 循环结构 智能控制 余热回收 工业应用
原文传递
FluidSIM软件在《液压与气压传动》课程实践教学中的应用 被引量:12
19
作者 杨国平 谭月玲 +3 位作者 张帅 赵文杉 闵耀 李岳洪 《液压气动与密封》 2018年第2期43-46,共4页
FluidSIM是德国Festo公司开发的电气一液压(气压)CAD和流体传动回路仿真软件。通过教学实例说明了FluidSIM具有较好多媒体教学功能,将其应用于《液压与气压传动》课程的教学中效果非常好,能够较快地帮助学生掌握各类元件和回路组成和工... FluidSIM是德国Festo公司开发的电气一液压(气压)CAD和流体传动回路仿真软件。通过教学实例说明了FluidSIM具有较好多媒体教学功能,将其应用于《液压与气压传动》课程的教学中效果非常好,能够较快地帮助学生掌握各类元件和回路组成和工作原理,提高学生的积极性、创造性和初步设计与分析流体传动基本回路能力。 展开更多
关键词 fluidSIM 流体传动与控制 仿真技术 课程改革
在线阅读 下载PDF
冲缝筛管防砂数值模拟方法与参数优化
20
作者 何诗梦 孙孟莹 《非常规油气》 2026年第1期107-115,共9页
渤海油田中疏松砂岩储层占比达80%,油井出砂及防砂是伴随渤海油田油气开采的关键问题之一。冲缝筛管作为机械防砂筛管结构中的关键成分,在生产中发挥着重要作用,但当前缺乏针对性的系统研究。为了降低冲缝筛管的堵塞风险,研究防砂堆积... 渤海油田中疏松砂岩储层占比达80%,油井出砂及防砂是伴随渤海油田油气开采的关键问题之一。冲缝筛管作为机械防砂筛管结构中的关键成分,在生产中发挥着重要作用,但当前缺乏针对性的系统研究。为了降低冲缝筛管的堵塞风险,研究防砂堆积的规律,优化结构,基于全尺寸冲缝筛管的机械模型,构建了油砂耦合运动数值模拟方法,并利用室内实验对模型进行了验证。以流体压力和砂堆积孔隙率为目标,对缝环形间距、轴向间距、流体速度、缝宽与砂颗粒比值4个因素展开定量的研究。结果表明:缝内凹形比外凸形抗堵塞能力更强,砂不易形成横向和纵向的堆积,堵塞风险较低;缝环形间距为5.5mm时,流体压力最小;缝的最佳轴向间距为8mm,流体压力最小,砂的孔隙率最大;流体速度小于0.2m/s,筛管的抗堵塞能力最强;缝宽与砂粒径的比值为0.57时,可缓解筛管堵塞。 展开更多
关键词 疏松砂岩 防砂 流体压力 孔隙率 数值模拟 参数优化
在线阅读 下载PDF
上一页 1 2 137 下一页 到第
使用帮助 返回顶部