期刊文献+
共找到275篇文章
< 1 2 14 >
每页显示 20 50 100
Power control and channel allocation optimization game algorithm with low energy consumption for wireless sensor network 被引量:2
1
作者 Xiao-Chen Hao Jin-Shuo Liu +2 位作者 Li-Xia Xie Bai Chen Ning Yao 《Chinese Physics B》 SCIE EI CAS CSCD 2018年第8期87-98,共12页
In a wireless sensor network (WSN), the energy of nodes is limited and cannot be charged. Hence, it is necessary to reduce energy consumption. Both the transmission power of nodes and the interference among nodes in... In a wireless sensor network (WSN), the energy of nodes is limited and cannot be charged. Hence, it is necessary to reduce energy consumption. Both the transmission power of nodes and the interference among nodes influence energy consumption. In this paper, we design a power control and channel allocation game model with low energy consumption (PCCAGM). This model contains transmission power, node interference, and residual energy. Besides, the interaction between power and channel is considered. The Nash equilibrium has been proved to exist. Based on this model, a power control and channel allocation optimization algorithm with low energy consumption (PCCAA) is proposed. Theoretical analysis shows that PCCAA can converge to the Pareto Optimal. Simulation results demonstrate that this algorithm can reduce transmission power and interference effectively. Therefore, this algorithm can reduce energy consumption and prolong the network lifetime. 展开更多
关键词 wireless sensor network power control channel allocation energy balance
原文传递
H-infinity performance optimization for networked control systems with limited communication channels 被引量:3
2
作者 Yulong WANG Guanghong YANG 《控制理论与应用(英文版)》 EI 2010年第1期99-104,共6页
This paper studies the problems of H-infinity performance optimization and controller design for continuous-time NCSs with both sensor-to-controller and controller-to-actuator communication constraints (limited commu... This paper studies the problems of H-infinity performance optimization and controller design for continuous-time NCSs with both sensor-to-controller and controller-to-actuator communication constraints (limited communication channels). By taking the derivative character of network-induced delay into full consideration and defining new Lyapunov functions, linear matrix inequalities (LMIs)-based H-infinity performance optimization and controller design are presented for NCSs with limited communication channels. If there do not exist any constraints on the communication channels, the proposed design methods are also applicable. The merit of the proposed methods lies in their Jess conservativeness, which is achieved by avoiding the utilization of bounding inequalities for cross products of vectors. The simulation results illustrate the merit and effectiveness of the proposed H-infinity controller design for NCSs with limited communication channels. 展开更多
关键词 networked control systems (NCSs) Limited communication channels Performance optimization controller design
在线阅读 下载PDF
A Dual-Channel Secure Transmission Scheme for Internet-Based Networked Control Systems
3
作者 田德振 戴亚平 +1 位作者 胡敬炉 平泽宏太郎 《Journal of Beijing Institute of Technology》 EI CAS 2010年第2期183-190,共8页
Two significant issues in Internet-based networked control systems ( INCSs), transport performance of different protocols and security breach from Internet side, are investigated. First, for improving the performanc... Two significant issues in Internet-based networked control systems ( INCSs), transport performance of different protocols and security breach from Internet side, are investigated. First, for improving the performance of data transmission, user datagram protocol (UDP) is adopted as the main stand for controllers and plants using INCSs. Second, a dual-channel secure transmission scheme (DCSTS)based on data transmission characteristics of INCSs is proposed, in which a raw UDP channel and a secure TCP (transmission control protocol) connection making use of SSL/TLS (secure sockets layer/transport layer security) are included. Further, a networked control protocol (NCP) at application layer for supporting DCSTS between the controllers and plants in INCSs is designed, and it also aims at providing a universal communication mechanism for interoperability of devices among the networked control laboratories in Beijing Institute of Technology of China, Central South University of China and Tokyo University of Technology of Japan. By means of a networked single-degree-of-free- dom robot arm, an INCS under the new protocol and security environment is created. Compared with systems such as IPSec or SSL/TLS, which may cause more than 91% network throughput deduction, the new DCSTS protocol may yield results ten times better, being just 5.67%. 展开更多
关键词 Internet-based networked control system (INCS) networked control protocol(NCP) dual-channel secure transmission scheme(DCSTS)
在线阅读 下载PDF
基于深度强化学习的连续微流控生物芯片控制逻辑布线
4
作者 蔡华洋 黄兴 刘耿耿 《计算机研究与发展》 北大核心 2025年第4期950-962,共13页
随着电子设计自动化技术的迅速发展,连续微流控生物芯片成为了目前最具前景的生化实验平台之一.该芯片通过采用内部的微阀门以及微通道来操纵体积仅为毫升或纳升的流体样品,从而自动执行混合和检测等基本的生化实验操作.为了实现正确的... 随着电子设计自动化技术的迅速发展,连续微流控生物芯片成为了目前最具前景的生化实验平台之一.该芯片通过采用内部的微阀门以及微通道来操纵体积仅为毫升或纳升的流体样品,从而自动执行混合和检测等基本的生化实验操作.为了实现正确的生化测定功能,部署于芯片内部的微阀门通常需要由基于多路复用器的控制逻辑进行管控,其通过控制通道获得来自核心输入的控制信号以实现精确切换.由于生化反应通常需要非常高的灵敏度,因此为了保证信号的即时传输,需要尽可能地减少连接每个阀门的控制路径长度,以降低信号传输的时延.此外,为了降低芯片的制造成本,如何有效减少控制逻辑中通道的总长度也是逻辑架构设计需要解决的关键问题之一.针对上述问题,提出了一种基于深度强化学习的控制逻辑布线算法以最小化信号传输时延以及控制通道总长度,从而自动构建高效的控制通道网络.该算法采用竞争深度Q网络架构作为深度强化学习框架的智能体,从而对信号传输时延和通道总长度进行权衡评估.此外,针对控制逻辑首次实现了对角型的通道布线,从根本上提高了阀门切换操作的效率并降低了芯片的制造成本.实验结果表明,所提出的算法能够有效构建高性能、低成本的控制逻辑架构. 展开更多
关键词 连续微流控生物芯片 深度强化学习 控制逻辑 控制通道网络 对角通道布线
在线阅读 下载PDF
面向多模态网络的SONiC网元控制通道容器设计
5
作者 凃化清 方徐鑫 +3 位作者 朱俊 邹涛 李传煌 隆克平 《电信科学》 北大核心 2025年第3期128-141,共14页
为解决SONiC(software for open networking in the cloud)交换机操作系统对多模态网络(polymor phic network,PINet)中模态适配及模态管控问题,提出了一个基于P4Runtime的SONiC网元控制通道容器p4runtime-pins,使多模态网元设备可以支... 为解决SONiC(software for open networking in the cloud)交换机操作系统对多模态网络(polymor phic network,PINet)中模态适配及模态管控问题,提出了一个基于P4Runtime的SONiC网元控制通道容器p4runtime-pins,使多模态网元设备可以支持多种网络模态流表的配置。p4runtime-pins容器通过gRPC服务模块实现与控制器的连接,使用邻近网元发现算法实现控制器对链路的发现。设计了网元端口更新算法解决了网元设备在实际应用环境中存在的端口变更问题。同时,针对SONiC网元交换机中硬件转发处理单元存在的流表支持性差异问题,设计了内部流表转存和gRPC网元代理功能,实现了不同网络模态流表的部署。实验结果表明,p4runtime-pins容器资源消耗低,仅占用了1.70%的CPU资源和0.45%的内存资源。同时,部署p4runtime-pins容器的SONiC网元设备能够准确地接收并配置控制器下发的流表规则,流表配置延迟仅为0.027~0.037 s。 展开更多
关键词 多模态网络 白盒交换机 交换机操作系统 网元控制通道
在线阅读 下载PDF
工业控制系统的物理入侵威胁模型与防护方法
6
作者 王相茗 鹏飞 +1 位作者 刘杨 刘烃 《自动化博览》 2025年第1期29-33,共5页
随着工业控制系统数字化和智能化转型的推进,信息网络技术与物理控制系统传统业务之间的融合日益加深。在各类业务频繁交互的背景下,海量传感器及执行器设备泛在接入,系统边界网络呈现出分布广泛、无人值守、物理保护措施薄弱的特点,为... 随着工业控制系统数字化和智能化转型的推进,信息网络技术与物理控制系统传统业务之间的融合日益加深。在各类业务频繁交互的背景下,海量传感器及执行器设备泛在接入,系统边界网络呈现出分布广泛、无人值守、物理保护措施薄弱的特点,为攻击者提供了以非授权接入设备为侵入方式的物理入侵攻击途径。攻击者可利用静默性入侵设备长期潜伏在系统中实施信息窃取,对工业控制系统造成极大的安全威胁。本文通过分析工业控制系统安全威胁案例和演变趋势,提出了物理入侵攻击威胁及其模型,对比了物理入侵设备的检测方法,探讨了该领域面临的挑战难题和未来的研究方向。 展开更多
关键词 工业控制系统 现场总线网络 物理入侵攻击 信道状态指纹
在线阅读 下载PDF
无线网络控制系统的信道译码先验信息估计方法
7
作者 朴瑨楠 李栋 +3 位作者 孙乙铭 李志博 杨明 钟珂珂 《移动通信》 2025年第5期39-43,共5页
无线网络控制系统稳定性与无线通信的传输误差密切相关。信道编码是改善无线通信性能的重要手段,但信道译码的设计一般不考虑发送比特先验信息的影响。有鉴于此,提出一种基于卡尔曼滤波的信道译码先验信息估计方法。此估计方法首先利用... 无线网络控制系统稳定性与无线通信的传输误差密切相关。信道编码是改善无线通信性能的重要手段,但信道译码的设计一般不考虑发送比特先验信息的影响。有鉴于此,提出一种基于卡尔曼滤波的信道译码先验信息估计方法。此估计方法首先利用控制系统模型和卡尔曼滤波算法,预测当前时刻的传感器输出和概率密度函数。接着,基于预测结果计算发送比特的先验概率。最后,利用先验概率和接收信号进行信道译码,改善译码和控制性能。仿真表明,对于通信层,相比于不考虑先验信息的信道译码,所提出的方法在控制系统模型受到干扰、码长64的LDPC码、误码率为10-2时,约有0.42 dB的性能增益。对于控制层,在低信噪比下,采用所提出方法的控制系统具有更低的均方根误差。 展开更多
关键词 无线网络控制系统 卡尔曼滤波 先验信息 信道编码
在线阅读 下载PDF
无线通信网络数据多路传输拥塞控制方法 被引量:3
8
作者 金杰 《自动化与仪表》 2025年第2期128-132,共5页
为提高无线通信网络传输的稳定性,降低延迟,提出基于多径信道均衡抑制的无线通信网络数据多路传输拥塞控制方法。构建网络信道模型,采用本地扩频序列构建无线通信网络数据传输的扩频码元序列,结合差分调制和广义信道冲击响应特征分析方... 为提高无线通信网络传输的稳定性,降低延迟,提出基于多径信道均衡抑制的无线通信网络数据多路传输拥塞控制方法。构建网络信道模型,采用本地扩频序列构建无线通信网络数据传输的扩频码元序列,结合差分调制和广义信道冲击响应特征分析方法实现对无线通信网络数据传输过程中的拥塞调节和自适应信道均衡控制。实验结果表明,该方法提高了数据传输的信道适应能力。 展开更多
关键词 无线通信网络 数据 多路传输 拥塞控制 信道均衡
在线阅读 下载PDF
一种简化的多通道接收机及自动增益控制方法设计
9
作者 姜晓斐 赵晓帅 《长江信息通信》 2025年第7期98-100,103,共4页
结合多通道接收机在组网通信系统中的工作特点,文章首先介绍了一种简化的多通道接收机模型,可降低接收机设计实现复杂度;在此基础上分析了在突发组网通信系统中该多通道接收机的自动增益控制流程,并设计了一种多通道联动的自动增益控制... 结合多通道接收机在组网通信系统中的工作特点,文章首先介绍了一种简化的多通道接收机模型,可降低接收机设计实现复杂度;在此基础上分析了在突发组网通信系统中该多通道接收机的自动增益控制流程,并设计了一种多通道联动的自动增益控制方法,能大幅增加接收信号饱和条件下增益控制的有效性,避免最佳接收通道选择错误造成的接收机性能下降问题。 展开更多
关键词 多通道接收机 自动增益控制 组网通信 突发信号
在线阅读 下载PDF
钠离子通道阻滞剂药物治疗颞叶癫痫相关的脑功能复杂网络的变化
10
作者 罗翠蜜 陈子蓉 +1 位作者 黄东莹 郑金瓯 《实用医学杂志》 北大核心 2025年第2期250-257,共8页
目的 探讨钠离子通道阻滞剂(SCB)治疗相关的脑功能复杂网络的变化以及对执行控制功能影响的神经机制。方法 将21例服用SCB的颞叶癫痫患者(TLE-SCB)和12例未服用SCB的颞叶癫痫患者(TLE-N)与18例健康对照(HC)一起纳入研究。完成行静息态... 目的 探讨钠离子通道阻滞剂(SCB)治疗相关的脑功能复杂网络的变化以及对执行控制功能影响的神经机制。方法 将21例服用SCB的颞叶癫痫患者(TLE-SCB)和12例未服用SCB的颞叶癫痫患者(TLE-N)与18例健康对照(HC)一起纳入研究。完成行静息态功能磁共振成像(rs-fMRI)和注意网络测试(ANT),应用图论方法研究3组受试者脑功能复杂网络的变化,研究脑网络变化与执行功能的关系。结果 TLE-SCB组和TLE-N组相比HC组均出现执行功能损害。脑网络拓扑属性分析结果显示,TLE-SCB组与TLE-N组相比,多个节点介数中心性降低(均Bonferroni校正,P <0.017);右侧杏仁核节点聚类系数、左侧枕下回局部效率都降低(t=-2.953,P=0.006;t=-2.597,P=0.0142)。TLE-SCB相比于HC组,多个节点介数中心性降低(均Bonferroni校正,P <0.017);左侧眶部额中回节点聚类系数增加(t=2.861,P=0.007);左侧颞下回局部效率降低(t=-2.870,P=0.007)。TLE-N组相比于HC组,右侧中央旁小叶介数中心性、局部效率增加(t=2.644,P=0.013;t=3.464,P=0.002);右侧杏仁核节点聚类系数增加(t=2.884,P=0.007)。相关分析显示:TLE-SCB组左侧枕下回介数中心性降低与执行效率呈负相关(P=0.045,r=-0.441)。结论 使用SCB药物患者出现相关脑功能网络拓扑属性的改变,可能是SCB认知障碍的网络基础。左侧枕下回可能在使用SCB的癫痫患者执行控制功能损害中发挥重要作用。 展开更多
关键词 颞叶癫痫 钠离子通道阻滞剂 图论 复杂网络 执行控制功能
暂未订购
基于数学建模的通信网络多信道拥塞调控方法
11
作者 苏秋燕 芦旭妍 《长江信息通信》 2025年第8期111-113,共3页
为满足现代通信网络对高性能和低延迟的要求,提出基于数学建模的通信网络多信道拥塞调控方法。基于数学建模,构建通信网络多信道模型。并以上述模型为基础,进行信道模型拥塞状态的检测与计算。为有效解决信道拥塞问题,采用数据流量负载... 为满足现代通信网络对高性能和低延迟的要求,提出基于数学建模的通信网络多信道拥塞调控方法。基于数学建模,构建通信网络多信道模型。并以上述模型为基础,进行信道模型拥塞状态的检测与计算。为有效解决信道拥塞问题,采用数据流量负载均衡技术,对网络内的数据流进行合理分配,实现拥塞的有效调控。实验结果表明:基于数学建模的通信网络多信道拥塞调控方法具有较高的可行性,能够在不同网络条件下显著降低网络拥塞程度,提高网络性能。 展开更多
关键词 拥塞调控 多信道拥塞 数学建模 网络流量 通信网络
在线阅读 下载PDF
二连杆双边控制系统数据驱动动力学建模及自适应控制研究
12
作者 赵财银 陈龙祥 《动力学与控制学报》 2025年第4期45-56,共12页
双边控制系统常处于恶劣的工作环境中,设备磨损、老化等因素不可避免,当系统物理参数发生变化时,原先所设计的控制器将不能有效地对系统进行控制.本文以二连杆双边控制系统为对象开展数据驱动动力学建模和自适应控制研究.首先利用系统... 双边控制系统常处于恶劣的工作环境中,设备磨损、老化等因素不可避免,当系统物理参数发生变化时,原先所设计的控制器将不能有效地对系统进行控制.本文以二连杆双边控制系统为对象开展数据驱动动力学建模和自适应控制研究.首先利用系统输入输出数据和拉格朗日神经网络(LNN)分别建立主、从端系统数据驱动动力学模型,然后考虑数据驱动模型与系统真实结构之间不可避免的误差,基于数据驱动动力学模型设计了四通道自适应控制器,并利用Lyapunov稳定性理论证明了该闭环控制系统的稳定性.最后考虑主端受到不同操纵力和从端受到不同环境力的情况进行仿真研究,仿真结果表明所提出的控制器具有稳定性和透明性,能够保证从端系统稳定地跟踪主端系统的运动,并能够在主端反映从端机械臂与外界环境间的作用力. 展开更多
关键词 二连杆机械臂 数据驱动建模 拉格朗日神经网络 双边控制 四通道自适应控制
在线阅读 下载PDF
基于非对称加密的云网5G通信下行信道传输安全控制
13
作者 龚险峰 徐胜超 《计算机测量与控制》 2025年第10期266-272,共7页
为了降低云网5G通信环境串行干扰下的信道传输译码错误率,设计基于非对称加密技术的云网第五代移动通信技术通信下行信道传输安全控制方法;根据通信信道最优控制值、最优平衡指标、最优控制节点,建立5G通信下行信道传输衰减平衡优化方程... 为了降低云网5G通信环境串行干扰下的信道传输译码错误率,设计基于非对称加密技术的云网第五代移动通信技术通信下行信道传输安全控制方法;根据通信信道最优控制值、最优平衡指标、最优控制节点,建立5G通信下行信道传输衰减平衡优化方程;基于非对称加密生成信道传输控制节点安全公钥,并结合衰减平衡优化方程,解密公钥加密数据;创新性地动态生成云网5G通信节点,离网传输控制素数,更新私钥,使一个公钥能够在不同传输控制节点上对应不同的私钥,实现串行干扰中的下行信道传输安全控制;实验结果表明,该方法应用后,边缘服务器译码错误率达到10-8以下,降低了译码错误概率,保证了数据在传输过程中不被篡改或损坏,数据传输安全控制效果较佳,有助于解决边缘服务器在数据传输过程中面临的挑战,推动边缘计算生态的完善和发展。 展开更多
关键词 非对称加密技术 云网 5G通信 下行信道 传输安全 控制方法
在线阅读 下载PDF
Controlled remote preparation of an arbitrary four-qubit cluster-type state 被引量:2
14
作者 陈维林 马松雅 瞿治国 《Chinese Physics B》 SCIE EI CAS CSCD 2016年第10期52-57,共6页
Two schemes are proposed to realize the controlled remote preparation of an arbitrary four-qubit cluster-type state via a partially entangled channel. We construct ingenious measurement bases at the sender’s and the ... Two schemes are proposed to realize the controlled remote preparation of an arbitrary four-qubit cluster-type state via a partially entangled channel. We construct ingenious measurement bases at the sender’s and the controller’s locations, which play a decisive role in the proposed schemes. The success probabilities can reach 50% and 100%, respectively. Compared with the previous proposals, the success probabilities are independent of the coefficients of the entangled channel. 展开更多
关键词 controlled remote state preparation partially entangled channel measurement basis quantum network communication
原文传递
基于自适应扰动观测器的旋转弹神经网络过载驾驶仪设计 被引量:1
15
作者 王伟 杨婧 +2 位作者 南宇翔 李俊辉 王雨辰 《兵工学报》 EI CAS CSCD 北大核心 2024年第11期3841-3855,共15页
旋转弹在飞行过程中受多种干扰的影响,包括跨域飞行气动参数剧烈变化引起的模型不确定性以及飞行过程中受到的外部扰动。为了解决高动态飞行环境中双通道旋转弹的鲁棒控制问题,基于轨迹线性化控制方法,设计伪逆反馈控制器。采用径向基... 旋转弹在飞行过程中受多种干扰的影响,包括跨域飞行气动参数剧烈变化引起的模型不确定性以及飞行过程中受到的外部扰动。为了解决高动态飞行环境中双通道旋转弹的鲁棒控制问题,基于轨迹线性化控制方法,设计伪逆反馈控制器。采用径向基函数神经网络,设计自适应前馈补偿控制器,有效实现对模型不确定性的精确逼近。将神经网络逼近误差和外部扰动处理为总扰动,并基于固定时间稳定理论设计一种自适应扰动观测器,实现对总扰动的精确估计及补偿。通过Lyapunov理论,严格证明了闭环系统的最终一致有界性。通过数值仿真验证了所设计方法的有效性。 展开更多
关键词 旋转弹 双通道控制 径向基函数神经网络 自适应扰动观测器 固定时间稳定理论
在线阅读 下载PDF
AN ENERGY-EFFICIENT OPTIMIZATION DEPLOYMENT SCHEME FOR WIRELESS SENSOR NETWORKS
16
作者 Li Zhiyuan Wang Ruchuan 《Journal of Electronics(China)》 2010年第4期507-515,共9页
Most of the current deployment schemes for Wireless Sensor Networks (WSNs) do not take the network coverage and connectivity features into account, as well as the energy consumption. This paper introduces topology con... Most of the current deployment schemes for Wireless Sensor Networks (WSNs) do not take the network coverage and connectivity features into account, as well as the energy consumption. This paper introduces topology control into the optimization deployment scheme, establishes the mathe-matical model with the minimum sum of the sensing radius of each sensors, and uses the genetic al-gorithm to solve the model to get the optimal coverage solution. In the optimal coverage deployment, the communication and channel allocation are further studied. Then the energy consumption model of the coverage scheme is built to analyze the performance of the scheme. Finally, the scheme is simulated through the network simulator NS-2. The results show the scheme can not only save 36% energy av-eragely, but also achieve 99.8% coverage rate under the condition of 45 sensors being deployed after 80 iterations. Besides, the scheme can reduce the five times interference among channels. 展开更多
关键词 Wireless Sensor networks (WSNs) Energy-efficient coverage Topology control channel allocation Genetic algorithm
在线阅读 下载PDF
On Coexistence of Vehicular Overlay Network and H2H Terminals on PRACH in LTE
17
作者 Nargis Khan Jelena Mii Vojislav B.Mii 《ZTE Communications》 2016年第3期3-12,共10页
Vehicular ad hoc networks (VANETs) that use the IEEE 802.11p communication standard face a number of challenges, not least when it comes to safety messages on the VANET control channel (CCH) where short delay time... Vehicular ad hoc networks (VANETs) that use the IEEE 802.11p communication standard face a number of challenges, not least when it comes to safety messages on the VANET control channel (CCH) where short delay times and reliable delivery are of pri- mary importance. In this paper we propose a vehicular machine-to-machine (VM2M) overlay network that uses Long Term Evolu- tion (LTE) physical random access channel (PRACH) to emulate VANET CCH. The overlay network uses dedicated preambles to separate vehicular traffic from regular LTE traffic and a cartier sense multiple access with collision avoidance (CSMA-CA) layer similar to the one used in IEEE 802.15.4 to avoid the four step handshake and the overhead it incurs. The performance of the pro- posed overlay is evaluated under a wide range of PRACH parameters which conform to the scenarios with high vehicle velocities and large distances between roadside units (RSUs) that may be encountered in rural areas and on highways. 展开更多
关键词 vehicular ad hoc networks (VANETs) VANET control channel (CCH) 3GPP long term evolution (LTE) physical random accesschannel (PRACH) IEEE 802.15.4 human-to-human (H2H) traffic
在线阅读 下载PDF
分形流道快速参数化建模方法与性能分析
18
作者 门志超 陈文炯 《机械设计与制造》 北大核心 2024年第12期121-125,133,共6页
针对长时间高热流密度的高温结构,利用分形流道具有的优异传热和流动特性,研究主动冷却设计技术是重要的研究课题。这里构建了主动换热的分形流道快速参数化建模方法,实现了Y、V、T三种流道形式的统一快速参数化建模,并开展了分形流道... 针对长时间高热流密度的高温结构,利用分形流道具有的优异传热和流动特性,研究主动冷却设计技术是重要的研究课题。这里构建了主动换热的分形流道快速参数化建模方法,实现了Y、V、T三种流道形式的统一快速参数化建模,并开展了分形流道换热性能分析。首先构建控制点,完成各级流道出入口位置和数量的确定;进而构建分形网络,根据分叉位置和控制点完成分形网络的构建以确定分形流道的基本轮廓;最后获得分形流道的尺寸,根据分形网络以及流道尺寸完成Y、V、T三种分形流道的参数化模型构建。利用该参数化建模方法分别在扇形和矩形基板上构建了Y、V、T三种构型分形流道并通过数值模拟的方法进行了传热性能和流动性能的研究。这里构建了主动换热的分形流道快速参数化建模方法,并通过数值算例验证了该方法的有效性,数值算例表明V形分形流道具有更佳的传热性能,Y形分形流道具有更佳的流动性能,另外相对于矩形基板,扇形基板上布置分形流道具有更均匀的温度分布。 展开更多
关键词 分形流道 参数化 控制点 分形网络 换热性能
在线阅读 下载PDF
无线通信网络随机接入信道拥塞联合控制研究 被引量:4
19
作者 吴欣华 屈金娇 荣剑 《电子设计工程》 2024年第9期142-146,共5页
为解决信道拥塞期间频繁发生的数据丢包问题,针对无线通信网络随机接入信道拥塞联合控制方法展开研究。根据拥塞现象的产生原因,制定拥塞分类标准,并针对随机接入信道的拥塞特征展开分析。根据无线通信网络拓扑结构的连接方式,判断信道... 为解决信道拥塞期间频繁发生的数据丢包问题,针对无线通信网络随机接入信道拥塞联合控制方法展开研究。根据拥塞现象的产生原因,制定拥塞分类标准,并针对随机接入信道的拥塞特征展开分析。根据无线通信网络拓扑结构的连接方式,判断信道组织当前的拥塞状态,利用联合控制参数实现拥塞控制。对比实验结果表明,该方法可将丢包率控制在15%以下,对于解决信道拥塞期间频繁发生的数据丢包问题具有积极作用。 展开更多
关键词 无线通信网络 信道拥塞 联合控制 拓扑 拥塞状态
在线阅读 下载PDF
Fairness-oriented routing algorithm joint with power control and channel assignment for multi-radio multi-channel wireless mesh networks 被引量:2
20
作者 LIU Kai-ming MA Tao +1 位作者 LIU Yuan-an KOU Ke-hao 《The Journal of China Universities of Posts and Telecommunications》 EI CSCD 2014年第5期55-60,共6页
The multi-radio multi-channel wireless mesh network (MRMC-WMN) draws general attention because of its excellent throughput performance, robustness and relative low cost. The closed interactions among power control ... The multi-radio multi-channel wireless mesh network (MRMC-WMN) draws general attention because of its excellent throughput performance, robustness and relative low cost. The closed interactions among power control (PC), channel assignment (CA) and routing is contributed to the performance of multi-radio multi-channel wireless mesh networks (MRMC-WMNs). However, the joint PC, CA and routing (JPCR) design, desired to achieve a global optimization, was poor addressed. The authors present a routing algorithm joint with PC and CA (JPCRA) to seek the routing, power and channel scheme for each flow, which can improve the fairness performance. Firstly, considering available channels and power levels, the routing metric, called minimum flow rate, is designed based on the physical interference and Shannon channel models. The JPCRA is presented based on the genetic algorithm (GA) with simulated annealing to maximize the minimum flow rate, an non-deterministic polynomial-time hard (NP-Hard) problem. Simulations show the JPCRA obtains better fairness among different flows and higher network throughput. 展开更多
关键词 channel assignment ROUTING power control mesh networks multi-radio multi-channel
原文传递
上一页 1 2 14 下一页 到第
使用帮助 返回顶部