A study on roll gap profile (strip profile) control was accomplished in a1700 mm single-stand temper mill. Some critical problems such as the deviation of work roll contourcaused by grinding and wear, the effectivenes...A study on roll gap profile (strip profile) control was accomplished in a1700 mm single-stand temper mill. Some critical problems such as the deviation of work roll contourcaused by grinding and wear, the effectiveness of work roll bending were discussed. Using a finiteelement model, the effects of roll contours (ground and wear) on strip profile were investigated.The roll bending effect on strip thickness was also analyzed. It is pointed out that there are somespecial features of flatness control in the temper mill: during temper rolling, roll deformation isslight due to small rolling load, and the loaded roll gap profile mainly depends on work rollcontour, while the backup roll has a little effect on gap crown; the effect of bending force ongauge can not be ignored due to the coupling between flatness control and gauge control. A new rollcontour arrangement adaptable to the mill was presented and has been put into practical production.The application of the new set of rolls showed some good results: larger crown control range of workroll bender, higher rolling stability, better strip profile and flatness quality.展开更多
A contour shape descriptor based on discrete Fourier transform （DFT） and a K-means al- gorithm modified self-organizing feature map （SOFM） neural network are established for shape clus- tering. The given shape is ...A contour shape descriptor based on discrete Fourier transform （DFT） and a K-means al- gorithm modified self-organizing feature map （SOFM） neural network are established for shape clus- tering. The given shape is first sampled uniformly in the polar coordinate. Then the discrete series is transformed to frequency domain and constructed to a shape characteristics vector. Firstly, sample set is roughly clustered using SOFM neural network to reduce the scale of samples. K-means algo- rithm is then applied to improve the performance of SOFM neural network and process the accurate clustering. K-means algorithm also increases the controllability of the clustering. The K-means algo- rithm modified SOFM neural network is used to cluster the shape characteristics vectors which is previously constructed. With leaf shapes as an example, the simulation results show that this method is effective to cluster the contour shapes.展开更多
Segmenting the lesion regions from the ultrasound （US） images is an important step in the intra-operative planning of some computer-aided therapies. High-Intensity Focused Ultrasound （HIFU）, as a popular computer-...Segmenting the lesion regions from the ultrasound （US） images is an important step in the intra-operative planning of some computer-aided therapies. High-Intensity Focused Ultrasound （HIFU）, as a popular computer-aided therapy, has been widely used in the treatment of uterine fibroids. However, such segmentation in HIFU remains challenge for two reasons： （1） the blurry or missing boundaries of lesion regions in the HIFU images and （2） the deformation of uterine fibroids caused by the patient＇s breathing or an external force during the US imaging process, which can lead to complex shapes of lesion regions. These factors have prevented classical active contour-based segmentation methods from yielding desired results for uterine fibroids in US images. In this paper, a novel active contour-based segmentation method is proposed, which utilizes the correlation information of target shapes among a sequence of images as prior knowledge to aid the existing active contour method. This prior knowledge can be interpreted as a unsupervised clustering of shapes prior modeling. Meanwhile, it is also proved that the shapes correlation has the low-rank property in a linear space, and the theory of matrix recovery is used as an effective tool to impose the proposed prior on an existing active contour model. Finally, an accurate method is developed to solve the proposed model by using the Augmented Lagrange Multiplier （ALM）. Experimental results from both synthetic and clinical uterine fibroids US image sequences demonstrate that the proposed method can consistently improve the performance of active contour models and increase the robustness against missing or misleading boundaries, and can greatly improve the efficiency of HIFU therapy.展开更多
This paper presents a numerical investigation of the potential aerodynamic benefits of using endwall contouring in a fairly aggressive duct with six struts based on the platform for endwall design optimization.The pla...This paper presents a numerical investigation of the potential aerodynamic benefits of using endwall contouring in a fairly aggressive duct with six struts based on the platform for endwall design optimization.The platform is constructed by integrating adaptive genetic algorithm（AGA）, design of experiments（DOE）, response surface methodology（RSM） based on the artificial neural network（ANN）, and a 3D Navier–Stokes solver.The visual analysis method based on DOE is used to define the design space and analyze the impact of the design parameters on the target function（response）.Optimization of the axisymmetric and the non-axisymmetric endwall contouring in an S-shaped duct is performed and evaluated to minimize the total pressure loss.The optimal ducts are found to reduce the hub corner separation and suppress the migration of the low momentum fluid.The non-axisymmetric endwall contouring is shown to remove the separation completely and reduce the net duct loss by 32.7%.展开更多
SmartCrown was a new system developed by VAI for improving the strip profile and flatness control first applied in 1700 mm tandem cold rolling mills at Wuhan Iron ＆ Steel （Group） Corporation （WISCO）. After tracin...SmartCrown was a new system developed by VAI for improving the strip profile and flatness control first applied in 1700 mm tandem cold rolling mills at Wuhan Iron ＆ Steel （Group） Corporation （WISCO）. After tracing and testing, the application of the conventional crown backup roll matching the SmartCrown work roll of the production mill led to heavy and nonuniform wear, and the edge spalling of the backup roll often occurred. A 3-dimension finite element model of roll stacks was established, which was used to analyze the above-mentioned problems, and it was found that the main reason was the highly nonuniform contact pressure distribution between the work roll and the backup roll. A new FSR （flexible shape backup roll） was developed and applied in 1700 mm tandem cold rolling mills. A lot of good actual effects of FSR, such as evident improvement in profile and flatness of strips, non-occurring edge spalling, wear uniform, and remarkable decrease in roll consumption were validated by long-term industrial applications.展开更多
The efficacy of shape control is the core of this technology and the main basis of automatic shape control system model designing. This passage constructs the three-dimensional elastic deformation model of CVCplus rol...The efficacy of shape control is the core of this technology and the main basis of automatic shape control system model designing. This passage constructs the three-dimensional elastic deformation model of CVCplus roll system in 2250 mm hot rolling mill. Comparing and analyzing different influence of working factors on control characteristic, the shape control characteristic of CVCplus roll system in its whole work time is studied, and the cause is analyzed and the difference of the roll gap curve and crown adjustable area in early and latter work time is compared. The outcome has crucial meaning in both theory and production.展开更多
The predictive calculation of comprehensive contour of work rolls in the on-line strip shape control model during hot rolling consists of two important parts of wear contour calculation and thermal contour calculation...The predictive calculation of comprehensive contour of work rolls in the on-line strip shape control model during hot rolling consists of two important parts of wear contour calculation and thermal contour calculation, which have a direct influence on the ac- curacy of shape control. A statistical wear model and a finite difference thermal contour model of work rolls were described. The comprehensive contour is the equivalence treatment of the sum of grinding, wear, and thermal contours. This comprehensive contour calculation model has been applied successfully in the real on-line strip shape control model. Its high precision has been proved through the large amounts of actual roll profile measurements and theoretical analyses. The hit rates （percent of shape index satisfying re- quirement） of crown and head flatness of the strips rolled, by using the shape control model, which includes the comprehensive contour calculation model, have about 16% and 10% increase respectively, compared to those of strips rolled by using manual operation.展开更多
Three dimensional digitization of human head is desired in many applications. In this paper, an information fusion based scheme is presented to obtain 3-D information of human head. Structured light technology is empl...Three dimensional digitization of human head is desired in many applications. In this paper, an information fusion based scheme is presented to obtain 3-D information of human head. Structured light technology is employed to measure depth. For the special reflection areas,in which the structured light stripe can not be detected directly, the shape of the structured light stripe can be calculated from the corresponding contour. By fusing the information of structured light and the contours, the problem of reflectance influence is solved, and the whole shape of head,including hair area, can be obtained. Some good results are obtained.展开更多
A new scheme for femur shape recovery from volumetric images using deformable models was proposed. First, prior 3 D deformable femur models are created as templates using point distribution models technology. Second, ...A new scheme for femur shape recovery from volumetric images using deformable models was proposed. First, prior 3 D deformable femur models are created as templates using point distribution models technology. Second, active contour models are employed to segment the magnetic resonance imaging (MRI) volumetric images of the tibial and femoral joints and the deformable models are initialized based on the segmentation results. Finally, the objective function is minimized to give the optimal results constraining the surface of shapes.展开更多
The matching and retrieval of the 2D shapes are challenging issues in object recognition and computer vision. In this paper, we propose a new object contour descriptor termed ECPDH (Elliptic Contour Points Distributio...The matching and retrieval of the 2D shapes are challenging issues in object recognition and computer vision. In this paper, we propose a new object contour descriptor termed ECPDH (Elliptic Contour Points Distribution Histogram), which is based on the distribution of the points on an object contour under the polar coordinates. ECPDH has the essential merits of invariance to scale and translation. Dynamic Programming (DP) algorithm is used to measure the distance between the ECPDHs. The effectiveness of the proposed method is demonstrated using some standard tests on MPEG-7 shape database. The results show the precision and recall of our method over other recent methods in the literature.展开更多
A layered simulation model with stairstep contour is built from AutoCAD through extruding each successive section contour having been compensated in dimensions to meet the application requirements of the RP part. In s...A layered simulation model with stairstep contour is built from AutoCAD through extruding each successive section contour having been compensated in dimensions to meet the application requirements of the RP part. In such a way the shape and size tolerance of the RP product could be verified beforehand promptly and precisely.展开更多
文摘A study on roll gap profile (strip profile) control was accomplished in a1700 mm single-stand temper mill. Some critical problems such as the deviation of work roll contourcaused by grinding and wear, the effectiveness of work roll bending were discussed. Using a finiteelement model, the effects of roll contours (ground and wear) on strip profile were investigated.The roll bending effect on strip thickness was also analyzed. It is pointed out that there are somespecial features of flatness control in the temper mill: during temper rolling, roll deformation isslight due to small rolling load, and the loaded roll gap profile mainly depends on work rollcontour, while the backup roll has a little effect on gap crown; the effect of bending force ongauge can not be ignored due to the coupling between flatness control and gauge control. A new rollcontour arrangement adaptable to the mill was presented and has been put into practical production.The application of the new set of rolls showed some good results: larger crown control range of workroll bender, higher rolling stability, better strip profile and flatness quality.
基金Supported by Guangdong Province Key Science and TechnologyItem(2011A010801005,2010A080402015)the National NaturalScience Foundation of China(61171142)
文摘A contour shape descriptor based on discrete Fourier transform （DFT） and a K-means al- gorithm modified self-organizing feature map （SOFM） neural network are established for shape clus- tering. The given shape is first sampled uniformly in the polar coordinate. Then the discrete series is transformed to frequency domain and constructed to a shape characteristics vector. Firstly, sample set is roughly clustered using SOFM neural network to reduce the scale of samples. K-means algo- rithm is then applied to improve the performance of SOFM neural network and process the accurate clustering. K-means algorithm also increases the controllability of the clustering. The K-means algo- rithm modified SOFM neural network is used to cluster the shape characteristics vectors which is previously constructed. With leaf shapes as an example, the simulation results show that this method is effective to cluster the contour shapes.
基金Supported by the National Basic Research Program of China(2011CB707904)the Natural Science Foundation of China(61472289)Hubei Province Natural Science Foundation of China(2015CFB254)
文摘Segmenting the lesion regions from the ultrasound （US） images is an important step in the intra-operative planning of some computer-aided therapies. High-Intensity Focused Ultrasound （HIFU）, as a popular computer-aided therapy, has been widely used in the treatment of uterine fibroids. However, such segmentation in HIFU remains challenge for two reasons： （1） the blurry or missing boundaries of lesion regions in the HIFU images and （2） the deformation of uterine fibroids caused by the patient＇s breathing or an external force during the US imaging process, which can lead to complex shapes of lesion regions. These factors have prevented classical active contour-based segmentation methods from yielding desired results for uterine fibroids in US images. In this paper, a novel active contour-based segmentation method is proposed, which utilizes the correlation information of target shapes among a sequence of images as prior knowledge to aid the existing active contour method. This prior knowledge can be interpreted as a unsupervised clustering of shapes prior modeling. Meanwhile, it is also proved that the shapes correlation has the low-rank property in a linear space, and the theory of matrix recovery is used as an effective tool to impose the proposed prior on an existing active contour model. Finally, an accurate method is developed to solve the proposed model by using the Augmented Lagrange Multiplier （ALM）. Experimental results from both synthetic and clinical uterine fibroids US image sequences demonstrate that the proposed method can consistently improve the performance of active contour models and increase the robustness against missing or misleading boundaries, and can greatly improve the efficiency of HIFU therapy.
基金supported by the National Natural Science Foundation of China (Nos.51006005, 51236001)the National Basic Research Program of China (No.2012CB720201)the Fundamen tal Research Funds for the Central Universities of China
文摘This paper presents a numerical investigation of the potential aerodynamic benefits of using endwall contouring in a fairly aggressive duct with six struts based on the platform for endwall design optimization.The platform is constructed by integrating adaptive genetic algorithm（AGA）, design of experiments（DOE）, response surface methodology（RSM） based on the artificial neural network（ANN）, and a 3D Navier–Stokes solver.The visual analysis method based on DOE is used to define the design space and analyze the impact of the design parameters on the target function（response）.Optimization of the axisymmetric and the non-axisymmetric endwall contouring in an S-shaped duct is performed and evaluated to minimize the total pressure loss.The optimal ducts are found to reduce the hub corner separation and suppress the migration of the low momentum fluid.The non-axisymmetric endwall contouring is shown to remove the separation completely and reduce the net duct loss by 32.7%.
文摘SmartCrown was a new system developed by VAI for improving the strip profile and flatness control first applied in 1700 mm tandem cold rolling mills at Wuhan Iron ＆ Steel （Group） Corporation （WISCO）. After tracing and testing, the application of the conventional crown backup roll matching the SmartCrown work roll of the production mill led to heavy and nonuniform wear, and the edge spalling of the backup roll often occurred. A 3-dimension finite element model of roll stacks was established, which was used to analyze the above-mentioned problems, and it was found that the main reason was the highly nonuniform contact pressure distribution between the work roll and the backup roll. A new FSR （flexible shape backup roll） was developed and applied in 1700 mm tandem cold rolling mills. A lot of good actual effects of FSR, such as evident improvement in profile and flatness of strips, non-occurring edge spalling, wear uniform, and remarkable decrease in roll consumption were validated by long-term industrial applications.
文摘The efficacy of shape control is the core of this technology and the main basis of automatic shape control system model designing. This passage constructs the three-dimensional elastic deformation model of CVCplus roll system in 2250 mm hot rolling mill. Comparing and analyzing different influence of working factors on control characteristic, the shape control characteristic of CVCplus roll system in its whole work time is studied, and the cause is analyzed and the difference of the roll gap curve and crown adjustable area in early and latter work time is compared. The outcome has crucial meaning in both theory and production.
基金the National Major Technology Equipment Research Program during the 9th Five-Year Plan Period (No.97-316-01-1).
文摘The predictive calculation of comprehensive contour of work rolls in the on-line strip shape control model during hot rolling consists of two important parts of wear contour calculation and thermal contour calculation, which have a direct influence on the ac- curacy of shape control. A statistical wear model and a finite difference thermal contour model of work rolls were described. The comprehensive contour is the equivalence treatment of the sum of grinding, wear, and thermal contours. This comprehensive contour calculation model has been applied successfully in the real on-line strip shape control model. Its high precision has been proved through the large amounts of actual roll profile measurements and theoretical analyses. The hit rates （percent of shape index satisfying re- quirement） of crown and head flatness of the strips rolled, by using the shape control model, which includes the comprehensive contour calculation model, have about 16% and 10% increase respectively, compared to those of strips rolled by using manual operation.
基金Supported by the National Natural Science Foundation of China(69775022) and 863 Programme of China(863-306-ZT04-06-3)
文摘Three dimensional digitization of human head is desired in many applications. In this paper, an information fusion based scheme is presented to obtain 3-D information of human head. Structured light technology is employed to measure depth. For the special reflection areas,in which the structured light stripe can not be detected directly, the shape of the structured light stripe can be calculated from the corresponding contour. By fusing the information of structured light and the contours, the problem of reflectance influence is solved, and the whole shape of head,including hair area, can be obtained. Some good results are obtained.
基金National Natural Science Foundation ofChina!( 69772 0 0 2 )
文摘A new scheme for femur shape recovery from volumetric images using deformable models was proposed. First, prior 3 D deformable femur models are created as templates using point distribution models technology. Second, active contour models are employed to segment the magnetic resonance imaging (MRI) volumetric images of the tibial and femoral joints and the deformable models are initialized based on the segmentation results. Finally, the objective function is minimized to give the optimal results constraining the surface of shapes.
文摘The matching and retrieval of the 2D shapes are challenging issues in object recognition and computer vision. In this paper, we propose a new object contour descriptor termed ECPDH (Elliptic Contour Points Distribution Histogram), which is based on the distribution of the points on an object contour under the polar coordinates. ECPDH has the essential merits of invariance to scale and translation. Dynamic Programming (DP) algorithm is used to measure the distance between the ECPDHs. The effectiveness of the proposed method is demonstrated using some standard tests on MPEG-7 shape database. The results show the precision and recall of our method over other recent methods in the literature.
基金Supported by College Science Foundation of Jiangsu(07KJB460113)
文摘A layered simulation model with stairstep contour is built from AutoCAD through extruding each successive section contour having been compensated in dimensions to meet the application requirements of the RP part. In such a way the shape and size tolerance of the RP product could be verified beforehand promptly and precisely.
