In this article, we consider the continuous gas in a bounded domain ∧ of R^＋ or R^d described by a Gibbsian probability measure μη∧ associated with a pair interaction φ, the inverse temperature β, the activity...In this article, we consider the continuous gas in a bounded domain ∧ of R^＋ or R^d described by a Gibbsian probability measure μη∧ associated with a pair interaction φ, the inverse temperature β, the activity z 〉 0, and the boundary condition η. Define F ∫ωf（s）wA（ds）. Applying the generalized Ito＇s formula for forward-backward martingales （see Klein et M. [5]）, we obtain convex concentration inequalities for F with respect to the Gibbs measure μη∧. On the other hand, by FKG inequality on the Poisson space, we also give a new simple argument for the stochastic domination for the Gibbs measure.展开更多
The exploration targets in the Kuqa Depression at present are mainly structure traps in Cretaceous-Tertiary.Due to the complexity of mountain distribution and reservoir forming conditions, the exploration of Jurassic ...The exploration targets in the Kuqa Depression at present are mainly structure traps in Cretaceous-Tertiary.Due to the complexity of mountain distribution and reservoir forming conditions, the exploration of Jurassic in the eastern Kuqa Depression has been in a state of semi-stagnation since the discovery of the Yinan-2 gas reservoir.According to the concept and theory of 'continuous petroleum reservoirs' and the re-analysis of the forming conditions of the Yinan-2 gas reservoir and regional natural gas in the eastern Kuqa Depression,it is believed that the deep Jurassic has good natural gas accumulation conditions as well as geological conditions for forming continuous tight gas reservoirs.The boundary of the Yinan-2 gas reservoir is not controlled by a structural spillpoint.The downdip part of the structure is dominated by gas,while the hanging wall of the fault is filled by water and forming obvious inverted gas and water.The gas reservoir has the normal temperature and ultrahigh pressure which formed in the near source or inner-source.All of these characteristics indicate that the Yinan-2 gas reservoir is different from conventional gas reservoirs.The deep Jurassic in the eastern Kuqa Depression has multisets of source-reservoir-cap assemblages,which comprise interbedded sandstones and mudstones.These assemblages are characterized by a self-generation,self-preserving and self-coverage model.Reservoir sandstones and coal measure mudstones are interbedded with each other at a large scale.As the source rocks,Triassic-Jurassic coal measure mudstones distribute continuously at a large scale and can generate and expel hydrocarbon.Source rocks contact intimately with the overlying sandstone reservoirs.During the late stage of hydrocarbon expulsion,natural gas charged continuously and directly into the neighboring reservoirs.Petroleum migrated mainly in a vertical direction over short distances.With ultra-high pressure and strong charging intensity,natural gas accumulated continuously.Reservoirs are dominated by sandstones of braided delta facies.The sand bodies distribute continuously horizontal.With low porosity and low permeability,the reservoirs are featured by strong heterogeneity.It is hypothesized that the sandstones of the interior depression tend to be relatively tight with increasing depth and structure stress weakness.Thus,it is predicted that continuous tight gas reservoirs of ultra-high pressure may exist in the deep formations of the eastern and even the whole Kuqa Depression.So,it is worth evaluating the exploration potential.展开更多
＂Continuous＂ tight gas reservoirs are those reservoirs which develop in widespread tight sandstones with a continuous distribution of natural gas. In this paper, we summarize the geological features of the source ro...＂Continuous＂ tight gas reservoirs are those reservoirs which develop in widespread tight sandstones with a continuous distribution of natural gas. In this paper, we summarize the geological features of the source rocks and ＂＇continuous＂ tight gas reservoirs in the Xujiahe Formation of the middle- south transition region, Sichuan Basin. The source rocks of the Xul Member and reservoir rocks of the Xu2 Member are thick （Xul Member： 40 m, Xu2 Member： 120 m） and are distributed continuously in this study area. The results of drilled wells show that the widespread sandstone reservoirs of the Xu2 Member are charged with natural gas. Therefore, the natural gas reservoirs of the Xu2 Member in the middle-south transition region are ＂continuous＂ tight gas reservoirs. The accumulation of ＂continuous＂ tight gas reservoirs is controlled by an adequate driving force of the pressure differences between source rocks and reservoirs, which is demonstrated by a ＂one-dimensional＂ physical simulation experiment. In this simulation, the natural gas of＂continuous＂ tight gas reservoirs moves tbrward with no preferential petroleum migration pathways （PPMP）, and the natural gas saturation of＂continuous＂ tight gas reservoirs is higher than that of conventional reservoirs.展开更多
Pneumatic conveying technology,as an efficient material transportation method,has been widely used in various industrial fields.To study the powder transportation in horizontal ash conveying pipes,this study relies on...Pneumatic conveying technology,as an efficient material transportation method,has been widely used in various industrial fields.To study the powder transportation in horizontal ash conveying pipes,this study relies on the Computational Particle Fluid Dynamics(CPFD)numerical method.The characteristics of the gas-solid two-phase flow under continuous air supply conditions are analyzed,and the effects on particle movement of factors such as feed port spacing,inlet air velocity,and the number of discharge ports are explored accordingly.The research results show that when the inlet velocity is 5 m/s,adjacent discharged particles come into contact after 8 s.As the inlet air velocity increases,the contact time between adjacent discharge ports is shortened.When the feed port spacing increases from 0.5 to 2 m,the dust accumulation thickness decreases by about 0.6 times.Additionally,when the spacing reaches a certain value,the rate of decrease in dust accumulation thickness begins to diminish.展开更多
The effect of autogeneous arc welding processes on tensile and impact properties of ferritic stainless steel conformed to AISI 409M grade is studied. Rolled plates of 4 mm thickness have been used as the base material...The effect of autogeneous arc welding processes on tensile and impact properties of ferritic stainless steel conformed to AISI 409M grade is studied. Rolled plates of 4 mm thickness have been used as the base material for preparing single pass butt welded joints. Tensile and impact properties, microhardness, microstructure, and fracture surface morphology of continuous current gas tungsten arc welding （CCGTAW）, pulsed current gas tungsten arc welding （PCGTAW）, and plasma arc welding （PAW） joints are evaluated and the results are compared. It is found that the PAW joints of ferritic stainless steel show superior tensile and impact properties when compared with CCG-TAW and PCGTAW joints, and this is mainly due to lower heat input, finer fusion zone grain diameter, and higher fusion zone hardness.展开更多
The worldwide increase in energy demand necessitates the development and optimization of marginal oil fields for sustenance.In this regard,effective and economic production of fluids are heavily relied upon the artifi...The worldwide increase in energy demand necessitates the development and optimization of marginal oil fields for sustenance.In this regard,effective and economic production of fluids are heavily relied upon the artificial lift techniques as the reservoir's natural energy may not be able to deliver the fluids to the surface.Gas lift is a widely practised and successful method that is suitable for rejuvenating the oil production from such fields.In this study,the influence of critical parameters like water cut,wellhead pressure(WHP)and gas-lift gas injection rate on the output from a gas lifted well was analysed.A significant reduction in the oil production was observed with the increase in water cut.For a fixed gas injection rate of 1 Mmscf/day,the production decreased by 26.90%when the water cut increased from 15%to 30%and further by 50.80%when the water cut reached 45%.An increase in the gas injection rate from 1 Mmscf/day to 8 Mmscf/day resulted in an increase in the production rate by 29.21%,40.48%and 56.56%for 15%,30%,and 45%water cut conditions,respectively.It was observed that there is a drop in the oil rate with the increase in WHP for a constant gas injection rate.An increase in the WHP from 100 psi to 300 psi resulted in a drop in the oil production rate by 11.01%,11.78%and 12.74%for 15%,30%and 45%water cut conditions,respectively.The study sheds light on the significance of optimizing the critical parameters to maximize the production from a well,with severely affected productivity,using a continuous gas lift system.展开更多
The application of Carbon Dioxide(CO_(2))injection in enhanced oil recovery(EOR)has evolved,making a major benefit for increasing the production level from mature reservoirs.This paper investigates the optimization of...The application of Carbon Dioxide(CO_(2))injection in enhanced oil recovery(EOR)has evolved,making a major benefit for increasing the production level from mature reservoirs.This paper investigates the optimization of the CO_(2)-EOR process based on using a new mode of simulation-based sensitivity analysis to understand two main proposed strategies,namely continuous gas injection and water-alternating-gas(WAG)injection.Prominent dynamical features including multiphase flow and displacement mechanisms were effectively captured in the form of a detailed reservoir model developed with considerable care for both techniques.The performance of each injection method was determined from a comprehensive analysis on the major production performance metrics:i)Oil recovery factor,ii)Gas-oil ratio iii)Cumulative oil production.Applying a wide range of sensitivity methods that included proxy model,Morris analysis and Sobol method were used to analyze the main parameters affecting the effectiveness of CO_(2) injection.The analysis then produced an optimization framework highlighting conditions conducive to achieving maximum oil recovery.The results of the study point to the effectiveness of WAG injection strategy in promoting oil recovery through better mobility control and lower gas breakthrough risk compared with continuous gas injection.This approach enhances sweep efficiency and highlights the significance of selecting appropriate injection strategies to maximize recovery in immiscible CO_(2) flooding processes.The alternating phases of water and CO_(2) in the Water-Alternating-Gas(WAG)process are crucial for optimizing oil recovery outcomes.展开更多
文摘In this article, we consider the continuous gas in a bounded domain ∧ of R^＋ or R^d described by a Gibbsian probability measure μη∧ associated with a pair interaction φ, the inverse temperature β, the activity z 〉 0, and the boundary condition η. Define F ∫ωf（s）wA（ds）. Applying the generalized Ito＇s formula for forward-backward martingales （see Klein et M. [5]）, we obtain convex concentration inequalities for F with respect to the Gibbs measure μη∧. On the other hand, by FKG inequality on the Poisson space, we also give a new simple argument for the stochastic domination for the Gibbs measure.
基金funded by the National Science and technology Major Project(2008ZX05001)
文摘The exploration targets in the Kuqa Depression at present are mainly structure traps in Cretaceous-Tertiary.Due to the complexity of mountain distribution and reservoir forming conditions, the exploration of Jurassic in the eastern Kuqa Depression has been in a state of semi-stagnation since the discovery of the Yinan-2 gas reservoir.According to the concept and theory of 'continuous petroleum reservoirs' and the re-analysis of the forming conditions of the Yinan-2 gas reservoir and regional natural gas in the eastern Kuqa Depression,it is believed that the deep Jurassic has good natural gas accumulation conditions as well as geological conditions for forming continuous tight gas reservoirs.The boundary of the Yinan-2 gas reservoir is not controlled by a structural spillpoint.The downdip part of the structure is dominated by gas,while the hanging wall of the fault is filled by water and forming obvious inverted gas and water.The gas reservoir has the normal temperature and ultrahigh pressure which formed in the near source or inner-source.All of these characteristics indicate that the Yinan-2 gas reservoir is different from conventional gas reservoirs.The deep Jurassic in the eastern Kuqa Depression has multisets of source-reservoir-cap assemblages,which comprise interbedded sandstones and mudstones.These assemblages are characterized by a self-generation,self-preserving and self-coverage model.Reservoir sandstones and coal measure mudstones are interbedded with each other at a large scale.As the source rocks,Triassic-Jurassic coal measure mudstones distribute continuously at a large scale and can generate and expel hydrocarbon.Source rocks contact intimately with the overlying sandstone reservoirs.During the late stage of hydrocarbon expulsion,natural gas charged continuously and directly into the neighboring reservoirs.Petroleum migrated mainly in a vertical direction over short distances.With ultra-high pressure and strong charging intensity,natural gas accumulated continuously.Reservoirs are dominated by sandstones of braided delta facies.The sand bodies distribute continuously horizontal.With low porosity and low permeability,the reservoirs are featured by strong heterogeneity.It is hypothesized that the sandstones of the interior depression tend to be relatively tight with increasing depth and structure stress weakness.Thus,it is predicted that continuous tight gas reservoirs of ultra-high pressure may exist in the deep formations of the eastern and even the whole Kuqa Depression.So,it is worth evaluating the exploration potential.
基金supported by the National Major Grant of"Accumulation Law,Key Technologies and Evaluations of the Stratigraphic Reservoirs"(No.2008ZX05000-001) from the Research Institute of Petroleum Exploration & Development,PetroChina
文摘＂Continuous＂ tight gas reservoirs are those reservoirs which develop in widespread tight sandstones with a continuous distribution of natural gas. In this paper, we summarize the geological features of the source rocks and ＂＇continuous＂ tight gas reservoirs in the Xujiahe Formation of the middle- south transition region, Sichuan Basin. The source rocks of the Xul Member and reservoir rocks of the Xu2 Member are thick （Xul Member： 40 m, Xu2 Member： 120 m） and are distributed continuously in this study area. The results of drilled wells show that the widespread sandstone reservoirs of the Xu2 Member are charged with natural gas. Therefore, the natural gas reservoirs of the Xu2 Member in the middle-south transition region are ＂continuous＂ tight gas reservoirs. The accumulation of ＂continuous＂ tight gas reservoirs is controlled by an adequate driving force of the pressure differences between source rocks and reservoirs, which is demonstrated by a ＂one-dimensional＂ physical simulation experiment. In this simulation, the natural gas of＂continuous＂ tight gas reservoirs moves tbrward with no preferential petroleum migration pathways （PPMP）, and the natural gas saturation of＂continuous＂ tight gas reservoirs is higher than that of conventional reservoirs.
文摘Pneumatic conveying technology,as an efficient material transportation method,has been widely used in various industrial fields.To study the powder transportation in horizontal ash conveying pipes,this study relies on the Computational Particle Fluid Dynamics(CPFD)numerical method.The characteristics of the gas-solid two-phase flow under continuous air supply conditions are analyzed,and the effects on particle movement of factors such as feed port spacing,inlet air velocity,and the number of discharge ports are explored accordingly.The research results show that when the inlet velocity is 5 m/s,adjacent discharged particles come into contact after 8 s.As the inlet air velocity increases,the contact time between adjacent discharge ports is shortened.When the feed port spacing increases from 0.5 to 2 m,the dust accumulation thickness decreases by about 0.6 times.Additionally,when the spacing reaches a certain value,the rate of decrease in dust accumulation thickness begins to diminish.
文摘The effect of autogeneous arc welding processes on tensile and impact properties of ferritic stainless steel conformed to AISI 409M grade is studied. Rolled plates of 4 mm thickness have been used as the base material for preparing single pass butt welded joints. Tensile and impact properties, microhardness, microstructure, and fracture surface morphology of continuous current gas tungsten arc welding （CCGTAW）, pulsed current gas tungsten arc welding （PCGTAW）, and plasma arc welding （PAW） joints are evaluated and the results are compared. It is found that the PAW joints of ferritic stainless steel show superior tensile and impact properties when compared with CCG-TAW and PCGTAW joints, and this is mainly due to lower heat input, finer fusion zone grain diameter, and higher fusion zone hardness.
文摘The worldwide increase in energy demand necessitates the development and optimization of marginal oil fields for sustenance.In this regard,effective and economic production of fluids are heavily relied upon the artificial lift techniques as the reservoir's natural energy may not be able to deliver the fluids to the surface.Gas lift is a widely practised and successful method that is suitable for rejuvenating the oil production from such fields.In this study,the influence of critical parameters like water cut,wellhead pressure(WHP)and gas-lift gas injection rate on the output from a gas lifted well was analysed.A significant reduction in the oil production was observed with the increase in water cut.For a fixed gas injection rate of 1 Mmscf/day,the production decreased by 26.90%when the water cut increased from 15%to 30%and further by 50.80%when the water cut reached 45%.An increase in the gas injection rate from 1 Mmscf/day to 8 Mmscf/day resulted in an increase in the production rate by 29.21%,40.48%and 56.56%for 15%,30%,and 45%water cut conditions,respectively.It was observed that there is a drop in the oil rate with the increase in WHP for a constant gas injection rate.An increase in the WHP from 100 psi to 300 psi resulted in a drop in the oil production rate by 11.01%,11.78%and 12.74%for 15%,30%and 45%water cut conditions,respectively.The study sheds light on the significance of optimizing the critical parameters to maximize the production from a well,with severely affected productivity,using a continuous gas lift system.
文摘The application of Carbon Dioxide(CO_(2))injection in enhanced oil recovery(EOR)has evolved,making a major benefit for increasing the production level from mature reservoirs.This paper investigates the optimization of the CO_(2)-EOR process based on using a new mode of simulation-based sensitivity analysis to understand two main proposed strategies,namely continuous gas injection and water-alternating-gas(WAG)injection.Prominent dynamical features including multiphase flow and displacement mechanisms were effectively captured in the form of a detailed reservoir model developed with considerable care for both techniques.The performance of each injection method was determined from a comprehensive analysis on the major production performance metrics:i)Oil recovery factor,ii)Gas-oil ratio iii)Cumulative oil production.Applying a wide range of sensitivity methods that included proxy model,Morris analysis and Sobol method were used to analyze the main parameters affecting the effectiveness of CO_(2) injection.The analysis then produced an optimization framework highlighting conditions conducive to achieving maximum oil recovery.The results of the study point to the effectiveness of WAG injection strategy in promoting oil recovery through better mobility control and lower gas breakthrough risk compared with continuous gas injection.This approach enhances sweep efficiency and highlights the significance of selecting appropriate injection strategies to maximize recovery in immiscible CO_(2) flooding processes.The alternating phases of water and CO_(2) in the Water-Alternating-Gas(WAG)process are crucial for optimizing oil recovery outcomes.
